Showing 1–50 of 73 results for author: Jain, S

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

A District level Flood Severity Index for India

Authors: Manabendra Saharia, Sharad K Jain, Ved Prakash, Harshul Malik, O P Sreejith

Abstract: India is one of the worst affected countries in the world in terms of fatalities and economic damage due to natural disasters, particularly floods. For planning flood mitigating and relief measures, granular historical information on a pan-India basis is required, which has been missing. Through recent efforts, a few national scale datasets have been created, but they lack the requisite informatio… ▽ More India is one of the worst affected countries in the world in terms of fatalities and economic damage due to natural disasters, particularly floods. For planning flood mitigating and relief measures, granular historical information on a pan-India basis is required, which has been missing. Through recent efforts, a few national scale datasets have been created, but they lack the requisite information on fatalities and damages, which has limited the ability to develop a flood severity index. This paper describes the development of the India Flood Inventory with Impacts (IFI-Impacts) database, which contains death and damage statistics, and combines population and historically flooded area information sourced from a national hydrologic-hydrodynamic modeling system. We also propose a novel District Flood Severity Index (DFSI), which accounts for the historical severity of floods in India based on the number of people they have affected and the spread and duration of such floods. Districts being the administrative units of the government, this novel index fulfills a major need and gap in currently available flood management tools. The dataset as well as the index is expected to significantly advance disaster preparedness towards floods in the country. DFSI can be improved further by collecting and incorporating additional variables, e.g., economic losses and by improving the reliability/robustness of the data of other variables. Based on DFSI, actions need to be addressed to mitigate flood damages, beginning with the districts with the high DFSI values. △ Less

Submitted 1 May, 2024; originally announced May 2024.

Incubating Advances in Integrated Photonics with Emerging Sensing and Computational Capabilities

Authors: Sourabh Jain, May Hlaing, Kang Chieh Fan, Jason Midkiff, Shupeng Ning, Chenghao Feng, Po Yu Hsiao, Patrick Camp, Ray Chen

Abstract: As photonic technologies continue to grow in multidimensional aspects, integrated photonics holds a unique position and continuously presents enormous possibilities to research communities. Applications span across data centers, environmental monitoring, medical diagnosis, and highly compact communication components, with further possibilities growing endlessly. Here, we provide a review of state… ▽ More As photonic technologies continue to grow in multidimensional aspects, integrated photonics holds a unique position and continuously presents enormous possibilities to research communities. Applications span across data centers, environmental monitoring, medical diagnosis, and highly compact communication components, with further possibilities growing endlessly. Here, we provide a review of state of the art integrated photonic sensors operating in near and mid infrared wavelength regions on various material platforms. Among different materials, architectures, and technologies leading the way for on chip sensors, we discuss optical sensing principles commonly applied to biochemical and gas sensing. Our focus is particularly on passive and active optical waveguides, including dispersion engineered metamaterial based structures an essential approach for enhancing the interaction between light and analytes in chip scale sensors. We harness a diverse array of cutting edge sensing technologies, heralding a revolutionary on chip sensing paradigm. Our arsenal includes refractive index based sensing, plasmonic, and spectroscopy, forging an unparalleled foundation for innovation and precision. Furthermore, we include a brief discussion of recent trends and computational concepts incorporating Artificial Intelligence & Machine Learning (AI/ML) and deep learning approaches over the past few years to improve the qualitative and quantitative analysis of sensor measurements. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Photonic-Electronic Integrated Circuits for High-Performance Computing and AI Accelerator

Authors: Shupeng Ning, Hanqing Zhu, Chenghao Feng, Jiaqi Gu, Zhixing Jiang, Zhoufeng Ying, Jason Midkiff, Sourabh Jain, May H. Hlaing, David Z. Pan, Ray T. Chen

Abstract: In recent decades, the demand for computational power has surged, particularly with the rapid expansion of artificial intelligence (AI). As we navigate the post-Moore's law era, the limitations of traditional electrical digital computing, including process bottlenecks and power consumption issue, are propelling the search for alternative computing paradigms. Among various emerging technologies, in… ▽ More In recent decades, the demand for computational power has surged, particularly with the rapid expansion of artificial intelligence (AI). As we navigate the post-Moore's law era, the limitations of traditional electrical digital computing, including process bottlenecks and power consumption issue, are propelling the search for alternative computing paradigms. Among various emerging technologies, integrated photonics stands out as a promising solution for the next generation of high-performance computing due to the inherent advantages of light, such as low latency, high bandwidth, and unique multiplexing techniques. Furthermore, the progress in photonic integrated circuits (PICs), which are equipped with abundant photoelectronic components, positions photonic-electronic integrated circuits as a viable solution for high-performance computing and as hardware AI accelerators. In this review, we survey recent advancements in both PIC-based digital and analog computing for AI, exploring the principal benefits and obstacles of implementation. Additionally, we propose a comprehensive analysis of photonic AI from the perspectives of hardware implementation, accelerator architecture, and software-hardware co-design. In the end, acknowledging the existing challenges, we underscore potential strategies for overcoming these issues and offer insights into the future drivers for optical computing. △ Less

Submitted 21 March, 2024; originally announced March 2024.

Insights into the mechanics of pure and bacteria-laden sessile whole blood droplet evaporation

Authors: Durbar Roy, Sophia M, Kush K Dewangan, Abdur Rasheed, Siddhant Jain, Anmol Singh, Dipshikha Chakravortty, Saptarshi Basu

Abstract: We study the mechanics of sessile blood drop evaporation using optical diagnostics, theoretical analysis, and micro/nano-characterization. The transient evaporation process has three major phases (A, B, and C) based on the evaporation rate. Phase A is the fastest, where edge evaporation dominates and forms a gelated three-phase contact line. Gelation results from sol-gel phase transition that occu… ▽ More We study the mechanics of sessile blood drop evaporation using optical diagnostics, theoretical analysis, and micro/nano-characterization. The transient evaporation process has three major phases (A, B, and C) based on the evaporation rate. Phase A is the fastest, where edge evaporation dominates and forms a gelated three-phase contact line. Gelation results from sol-gel phase transition that occurs due to the accumulation of red blood cells, as they get transported due to outward capillary flow generated during drop evaporation. The intermediate phase B consists of a gelation front propagating radially inwards due to the combined effect of outward capillary flow and drop height reduction evaporating in pinned mode, forming a wet gel phase. We unearthed that the gelation of the entire droplet occurs in Phase B, and the gel formed contains trace amounts of water that are detectable in our experiments. Phase C is the final slowest stage of evaporation, where the wet gel transforms into a dry gel and leads to desiccation induced stress, forming diverse crack patterns in the dried blood drop precipitate. We observe radial and orthoradial cracks in the precipitate's thicker region, mud-flat cracks in the drop center, and the outer contact line where thickness and curvature are relatively small. We also study the evaporation of bacteria-laden droplets to simulate bacterial infection in human blood and show that the drop evaporation rate and final dried residue pattern do not change appreciably within the parameter variation of the bacterial concentration typically found in bacterial infection of living organisms. △ Less

Submitted 17 April, 2024; v1 submitted 19 February, 2024; originally announced February 2024.

The McNish and Lincoln Solar Activity Predictions: The Method and its Performance

Authors: Frédéric Clette, Shantanu Jain, Tatiana Podladchikova

Abstract: The McNish and Lincoln (ML) method, introduced in 1949, was one of the first attempts to produce mid-term forecasts of solar activity, up to 12 months ahead. However, it has been poorly described and evaluated in the past literature, in particular its actual operational implementation by NOAA. Here, we reconstruct the exact formulation of the method, as it was applied since the early 1970s, and… ▽ More The McNish and Lincoln (ML) method, introduced in 1949, was one of the first attempts to produce mid-term forecasts of solar activity, up to 12 months ahead. However, it has been poorly described and evaluated in the past literature, in particular its actual operational implementation by NOAA. Here, we reconstruct the exact formulation of the method, as it was applied since the early 1970s, and we provide a full mathematical derivation of the prediction errors. For bench-marking the method, we also produce monthly predictions over the past 190 years, from 1833 (Cycle 8) to 2023 (Cycle 25), and develop statistics of the differences between the predictions and the observed 13-month smoothed sunspot number (SSN) time series, according to the phase in the solar cycle. Our analysis shows that the ML method is heavily constrained because it is primarily based on the mean of all past cycles, which imposes a fixed amplitude and length and suffers from a temporal smearing that grows towards the end of the solar cycle. We find that predictions are completely unreliable in the first 12 months of the cycle, and over the last two years preceding the ending minimum (around 130 months), and beyond this minimum. By contrast, in the course of the cycle (months 18 to 65), ML predictions prove to be reliable over a time range of up to 50 months (4.2 years), thus much longer than the 12-month conventional range used so far. However, we find that predictions then suffer from systematic under-(over-)estimates for cycles that have a higher (lower) amplitude than the base mean cycle. Overall, we conclude that although the ML method provides valid prediction errors, it suffers from strong limitations, with very little room for improvement, as it indifferently merges all past cycles into a single fixed statistics. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: 44 pages, 22 figures

Interaction of Vortex Ring with Perforated V-Wall

Authors: Siddhant Jain, Saini Jatin Rao, Saptarshi Basu

Abstract: Experiments are performed to investigate the interaction of a vortex ring (Reynolds number based on circulation (Re gamma = 11500) with perforated surface (open area ratio, phi1 = 0.24 and phi2 = 0.44) with different included angles (theta = 60deg - 180deg ). The phenomenon is characterized using techniques like Planer Laser-Induced Fluorescence (PLIF) imaging and Particle Image Velocimetry (PIV).… ▽ More Experiments are performed to investigate the interaction of a vortex ring (Reynolds number based on circulation (Re gamma = 11500) with perforated surface (open area ratio, phi1 = 0.24 and phi2 = 0.44) with different included angles (theta = 60deg - 180deg ). The phenomenon is characterized using techniques like Planer Laser-Induced Fluorescence (PLIF) imaging and Particle Image Velocimetry (PIV). Lagrangian analysis using finite-time Lyapunov exponents (FTLE) and Gamma_2 vortex identification methods are utilised to understand the flow physics. Early observations reveal the growth of induced mushroom structures through the holes as a consequence of placing the perforated surface in the path of the vortex ring. These structures along with Kelvin-Helmholtz (K-H) instability imparts the initial instability to the emerging jets. We discern a sequential emergence of the vortex ring in the form of jets at lower theta value that diminishes at higher values. Except for theta = 150deg cases, where the flow from the two halves starts to talk resulting in a divergence in the circulation ratio, a reformed vortex ring is formed for all cases in the far downstream. A detailed discussion on the downstream vorticity dynamics has been been provided using vorticity contours, time-series variation of circulation and the FTLE fields. By varying the value of theta, we present a more generalised study of vortex ring interacting with perforated surfaces that finds application in multiple domains including flow control, manipulation and vortical cleaning. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Dynamics of Soap Bubble Inflation

Authors: Saini Jatin Rao, Siddhant Jain, Saptarshi Basu

Abstract: Bubbles have always captivated our curiosity with their aesthetics and complexities alike. While the act of blowing bubbles is familiar to everyone, the underlying physics of these fleeting spheres often eludes reasoning. In this letter, we discuss the dynamics of inflating a soap bubble using controlled airflow through a film-coated nozzle. We assess and predict the rate of inflation by varying t… ▽ More Bubbles have always captivated our curiosity with their aesthetics and complexities alike. While the act of blowing bubbles is familiar to everyone, the underlying physics of these fleeting spheres often eludes reasoning. In this letter, we discuss the dynamics of inflating a soap bubble using controlled airflow through a film-coated nozzle. We assess and predict the rate of inflation by varying the source pressure. Visualising the previously unexplored internal flow reveals that air enters the bubble as a round jet, emerging from the nozzle opening and im**es on the expanding concave bubble interface to form a toroidal vortex. Several scaling laws of the associated vortical flow spanning the entire bubble and the vortex core are reported. The observed dynamics of this bubble-confined vortex ring formation indicate universality in certain aspects when compared to the free laminar vortex rings. △ Less

Submitted 8 February, 2024; v1 submitted 13 January, 2024; originally announced January 2024.

Neural network models for preferential concentration of particles in two-dimensional turbulence

Authors: Thibault Maurel-Oujia, Suhas S. Jain, Keigo Matsuda, Kai Schneider, Jacob R. West, Kazuki Maeda

Abstract: Cluster and void formations are key processes in the dynamics of particle-laden turbulence. In this work, we assess the performance of various neural network models for synthesizing preferential concentration fields of particles in turbulence. A database of direct numerical simulations of homogeneous isotropic two-dimensional turbulence with one-way coupled inertial point particles, is used to tra… ▽ More Cluster and void formations are key processes in the dynamics of particle-laden turbulence. In this work, we assess the performance of various neural network models for synthesizing preferential concentration fields of particles in turbulence. A database of direct numerical simulations of homogeneous isotropic two-dimensional turbulence with one-way coupled inertial point particles, is used to train the models using vorticity as the input to predict the particle number density fields. We compare autoencoder, U--Net, generative adversarial network (GAN), and diffusion model approaches, and assess the statistical properties of the generated particle number density fields. We find that the GANs are superior in predicting clusters and voids, and therefore result in the best performance. Additionally, we explore a concept of ``supersampling", where neural networks can be used to predict full particle data using only the information of few particles, which yields promising perspectives for reducing the computational cost of expensive DNS computations by avoiding the tracking of millions of particles. We also explore the inverse problem of synthesizing the enstrophy fields using the particle number density distribution as the input at different Stokes numbers. Hence, our study also indicates the potential use of neural networks to predict turbulent flow statistics using experimental measurements of inertial particles. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Kinematic Characterization of Micro-Mobility Vehicles During Evasive Maneuvers

Authors: Paolo Terranova, Shu-Yuan Liu, Sparsh Jain, Johan Engstrom, Miguel Perez

Abstract: There is an increasing need to comprehensively characterize the kinematic performances of different Micromobility Vehicles (MMVs). This study aims to: 1) characterize the kinematic behaviors of different MMVs during emergency maneuvers; 2) explore the influence of different MMV power sources on the device performances; 3) investigate if piecewise linear models are suitable for modeling MMV traject… ▽ More There is an increasing need to comprehensively characterize the kinematic performances of different Micromobility Vehicles (MMVs). This study aims to: 1) characterize the kinematic behaviors of different MMVs during emergency maneuvers; 2) explore the influence of different MMV power sources on the device performances; 3) investigate if piecewise linear models are suitable for modeling MMV trajectories. A test track experiment where 40 frequent riders performed emergency braking and swerving maneuvers riding a subset of electric MMVs, their traditional counterparts, and, in some cases, behaving as running pedestrians. A second experiment was conducted to determine the MMVs swerving lower boundaries. Device power source resulted having a statistically significant influence on kinematic capabilities of the MMVs: while e-MMVs displayed superior braking capabilities compared to their traditional counterparts, the opposite was observed in terms of swerving performance. Furthermore, performances varied significantly across the different MMV typologies, with handlebar-based devices consistently outperforming the handlebar-less devices across the metrics considered. The piecewise linear models used for braking profiles fit well for most MMVs, except for skateboards and pedestrians due to foot-ground engagement. These findings underscore that the effectiveness of steering or braking in preventing collisions may vary depending on the type and power source of the device. This study also demonstrates the applicability of piecewise linear models for generating parameterized functions that accurately model braking trajectories, providing a valuable resource for automated systems developers. The model, however, also reveals that the single brake ramp assumption does not apply for certain types of MMVs or for pedestrians, indicating the necessity for further improvements. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Comments: 21 pages, 8 figures

Æ codes

Authors: Shubham P. Jain, Eric R. Hudson, Wesley C. Campbell, Victor V. Albert

Abstract: Diatomic molecular codes [arXiv:1911.00099] are designed to encode quantum information in the orientation of a diatomic molecule, allowing error correction from small torques and changes in angular momentum. Here, we directly study noise native to atomic and molecular platforms -- spontaneous emission, stray electromagnetic fields, and Raman scattering -- and show that diatomic molecular codes fai… ▽ More Diatomic molecular codes [arXiv:1911.00099] are designed to encode quantum information in the orientation of a diatomic molecule, allowing error correction from small torques and changes in angular momentum. Here, we directly study noise native to atomic and molecular platforms -- spontaneous emission, stray electromagnetic fields, and Raman scattering -- and show that diatomic molecular codes fail against this noise. We derive simple necessary and sufficient conditions for codes to protect against such noise. We also identify existing and develop new absorption-emission (Æ) codes that are more practical than molecular codes, require lower average momentum, can directly protect against photonic processes up to arbitrary order, and are applicable to a broader set of atomic and molecular systems. △ Less

Submitted 15 May, 2024; v1 submitted 20 November, 2023; originally announced November 2023.

Comments: 5+5 pages, 3 figures. Added appendix about non-locality of spontaneous decay

A model for transport of interface-confined scalars and insoluble surfactants in two-phase flows

Authors: Suhas S. Jain

Abstract: In this work, we propose a novel scalar-transport model for the simulation of scalar quantities that are confined to the interface in two-phase flows. In a two-phase flow, the scalar quantities, such as salts and surfactants, can reside at the interface and can modify the properties of the interface, in the time scales of interest. This confinement of the scalars leads to the formation of sharp gr… ▽ More In this work, we propose a novel scalar-transport model for the simulation of scalar quantities that are confined to the interface in two-phase flows. In a two-phase flow, the scalar quantities, such as salts and surfactants, can reside at the interface and can modify the properties of the interface, in the time scales of interest. This confinement of the scalars leads to the formation of sharp gradients of the scalar concentration values at the interface, presenting a serious challenge for its numerical simulations. To overcome this challenge, we propose a computational model for the transport of scalars that maintains the confinement condition for these quantities. The model is discretized using a central-difference scheme, which leads to a non-dissipative implementation that is crucial for the simulation of turbulent flows. The model is used with the ACDI diffuse-interface method (Jain, J. Comput. Phys., 2022), but can also be used with other algebraic-based interface-capturing methods. Furthermore, the provable strengths of the proposed model are: (a) the model maintains the positivity property of the scalar concentration field, a physical realizability requirement for the simulation of scalars, when the proposed criterion is satisfied, (b) the proposed model is such that the transport of the scalar concentration field is consistent with the transport of the volume fraction field, which results in effective discrete confinement of the scalar at the interface; and therefore, prevents the artificial numerical diffusion of the scalar into the bulk region of the two phases. Finally, we present numerical simulations using the proposed model for both one-dimensional and multidimensional cases and assess: the accuracy and robustness of the model, the validity of the positivity property of the scalar concentration field, and the confinement of the scalar at the interface. △ Less

Submitted 18 November, 2023; originally announced November 2023.

Comments: 18 pages, 8 figures

Unsupervised Learning of Molecular Embeddings for Enhanced Clustering and Emergent Properties for Chemical Compounds

Authors: Jaiveer Gill, Ratul Chakraborty, Reetham Gubba, Amy Liu, Shrey Jain, Chirag Iyer, Obaid Khwaja, Saurav Kumar

Abstract: The detailed analysis of molecular structures and properties holds great potential for drug development discovery through machine learning. Develo** an emergent property in the model to understand molecules would broaden the horizons for development with a new computational tool. We introduce various methods to detect and cluster chemical compounds based on their SMILES data. Our first method, a… ▽ More The detailed analysis of molecular structures and properties holds great potential for drug development discovery through machine learning. Develo** an emergent property in the model to understand molecules would broaden the horizons for development with a new computational tool. We introduce various methods to detect and cluster chemical compounds based on their SMILES data. Our first method, analyzing the graphical structures of chemical compounds using embedding data, employs vector search to meet our threshold value. The results yielded pronounced, concentrated clusters, and the method produced favorable results in querying and understanding the compounds. We also used natural language description embeddings stored in a vector database with GPT3.5, which outperforms the base model. Thus, we introduce a similarity search and clustering algorithm to aid in searching for and interacting with molecules, enhancing efficiency in chemical exploration and enabling future development of emergent properties in molecular property prediction models. △ Less

Submitted 25 October, 2023; originally announced October 2023.

Introducing dusty plasma particle growth of nanospherical titanium dioxide

Authors: Bhavesh Ramkorun, Swapneal Jain, Adib Taba, Masoud Mahjouri-Samani, Michael E. Miller, Saikat C. Thakur, Edward Thomas Jr., Ryan B. Comes

Abstract: In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homoge… ▽ More In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homogeneous radius of 230 $\pm$ 17 nm after an elapsed time of 70 seconds. The particle grew linearly and the growth displayed a cyclic behavior; that is, upon reaching their maximum radius, the largest particles fell out of the plasma, and a new growth cycle immediately followed. The particles were collected after being grown for different amounts of time and imaged using scanning electron microscopy. Further characterization was carried out using energy dispersive X-ray spectroscopy, X-ray diffraction and Raman spectroscopy to elucidate the chemical composition and crystalline properties of the maximally sized particles. Initially, the as-grown particles after 70 seconds exhibited an amorphous structure. However, annealing treatments at temperatures of 400 $^\circ$C and 800 $^\circ$C induced crystallization, yielding anatase and rutile phases, respectively. Notably, annealing at 600 $^\circ$C resulted in a mixed phase of anatase and rutile. These findings open new avenues for a rapid and controlled growth technique of titanium dioxide as dusty plasma. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Comments: 8 pages, 5 figures

A robust phase-field method for two-phase flows on unstructured grids

Authors: Hanul Hwang, Suhas S. Jain

Abstract: A phase-field method for unstructured grids that is accurate, conservative, and robust is proposed in this work. The proposed method also results in bounded transport of volume fraction, and the interface thickness adapts automatically to local grid size. In addition to this, we present a novel formulation for two-phase flows on collocated grids that is provably energy stable, which is a critical… ▽ More A phase-field method for unstructured grids that is accurate, conservative, and robust is proposed in this work. The proposed method also results in bounded transport of volume fraction, and the interface thickness adapts automatically to local grid size. In addition to this, we present a novel formulation for two-phase flows on collocated grids that is provably energy stable, which is a critical feature for robust simulations of two-phase turbulent flows. The proposed method is first evaluated on canonical test cases, including scenarios like drop advection and drop in a shear flow. The accuracy of the proposed method in the presence of grid transitions, which is important for simulations in complex geometries using unstructured grids, is also evaluated. We assess the robustness of our method by performing simulations of a drop in homogeneous isotropic turbulence at infinite Reynolds number with varying density ratios. Furthermore, as a step toward verification and validation, simulations of test cases in complex geometries and conditions, such as, a damped surface wave, infinitesimal interface distortion on a liquid jet, and the atomization of a liquid jet from the engine combustion network's Spray A nozzle are presented. These simulations illustrate the accuracy, robustness, and applicability of the proposed method in various kinds of complex two-phase flow applications of engineering interest. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Comments: 44 pages, 20 figures

Large-eddy simulations of the NACA23012 airfoil with laser-scanned ice shapes

Authors: Brett Bornhoft, Suhas S. Jain, Konrad Goc, Sanjeeb T. Bose, Parviz Moin

Abstract: In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time and longer-duration glaze and rime ice exposure events, including a geometry that results from using a thermal ice-protection system. Using the laser-scanned geom… ▽ More In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time and longer-duration glaze and rime ice exposure events, including a geometry that results from using a thermal ice-protection system. Using the laser-scanned geometries, detailed representations of the three-dimensional ice geometries are resolved on the grid and simulated using wall-modeled LES. Integrated loads (lift, drag, and moment coefficients) and pressure distributions are compared against experimental measurements in both clean and iced conditions for several angles of attack in both pre-and post-stall regions. The relevant comparisons to the experimental results show that qualitative and acceptable quantitative agreement with the data is observed across all geometries. Glaze ice formations exhibit larger and highly nonuniform ice features, such as `horns', in contrast to rime ice formations characterized by smaller, uniformly distributed roughness elements. In wall-modeled LES, it was observed that larger roughness scales in the glaze ice that trigger transition can be accurately resolved. Therefore, it is possible for WMLES to accurately capture the aerodynamics of glaze ice shapes without the need for additional modeling. In contrast, rime ice geometries required additional resolution to accurately represent the aerodynamic loads. This study demonstrates the effectiveness of the wall-modeled LES technique in simulating the complex aerodynamic effects of iced airfoils, providing valuable insights for aircraft design in icing environments and highlighting the importance of accurately representing ice geometries and roughness scales in simulations. △ Less

Submitted 22 September, 2023; originally announced September 2023.

Stable, entropy-consistent, and localized artificial-diffusivity method for capturing discontinuities

Authors: Suhas S. Jain, Rahul Agrawal, Parviz Moin

Abstract: In this work, a localized artificial-viscosity/diffusivity method is proposed for accurately capturing discontinuities in compressible flows. There have been numerous efforts to improve the artificial diffusivity formulation in the last two decades, through appropriate localization of the artificial bulk viscosity for capturing shocks. However, for capturing contact discontinuities, either a densi… ▽ More In this work, a localized artificial-viscosity/diffusivity method is proposed for accurately capturing discontinuities in compressible flows. There have been numerous efforts to improve the artificial diffusivity formulation in the last two decades, through appropriate localization of the artificial bulk viscosity for capturing shocks. However, for capturing contact discontinuities, either a density or internal energy variable is used as a detector. An issue with this sensor is that it not only detects contact discontinuities, but also falsely detects the regions of shocks and vortical motions. Using this detector to add artificial mass/thermal diffusivity for capturing contact discontinuities is hence unnecessarily dissipative. To overcome this issue, we propose a sensor similar to the Ducros sensor (for shocks) to detect contact discontinuities, and further localize artificial mass/thermal diffusivity for capturing contact discontinuities. The proposed method contains coefficients that are less sensitive to the choice of the flow problem. This is achieved by improved localization of the artificial diffusivity in the present method. A discretely consistent dissipative flux formulation is presented and is coupled with a robust low-dissipative scheme, which eliminates the need for filtering the solution variables. The proposed method also does not require filtering for the discontinuity detector/sensor functions, which is typically done to smear out the artificial fluid properties and obtain stable solutions. Hence, the challenges associated with extending the filtering procedure for unstructured grids is eliminated, thereby, making the proposed method easily applicable for unstructured grids. Finally, a straightforward extension of the proposed method to two-phase flows is also presented. △ Less

Submitted 6 July, 2023; originally announced July 2023.

Comments: 24 pages, 11 figures, Under review in the Physical Review Fluids journal

Band gaps of long-period polytypes of IV, IV-IV, and III-V semiconductors estimated with an Ising-type additivity model

Authors: Raghunathan Ramakrishnan, Shruti Jain

Abstract: We apply an Ising-type model to estimate the band gaps of the polytypes of group IV elements (C, Si, and Ge) and binary compounds of groups: IV-IV (SiC, GeC, and GeSi), and III-V (nitride, phosphide, and arsenide of B, Al, and Ga). The models use reference band gaps of the simplest polytypes comprising 2--6 bilayers calculated with the hybrid density functional approximation, HSE06. We report four… ▽ More We apply an Ising-type model to estimate the band gaps of the polytypes of group IV elements (C, Si, and Ge) and binary compounds of groups: IV-IV (SiC, GeC, and GeSi), and III-V (nitride, phosphide, and arsenide of B, Al, and Ga). The models use reference band gaps of the simplest polytypes comprising 2--6 bilayers calculated with the hybrid density functional approximation, HSE06. We report four models capable of estimating band gaps of nine polytypes containing 7 and 8 bilayers with an average error of $\lesssim0.05$ eV. We apply the best model with an error of $<0.04$ eV to predict the band gaps of 497 polytypes with up to 15 bilayers in the unit cell, providing a comprehensive view of the variation in the electronic structure with the degree of hexagonality of the crystal structure. Within our enumeration, we identify four rhombohedral polytypes of SiC -- 9$R$, 12$R$, 15$R$(1), and 15$R$(2) -- and perform detailed stability and band structure analysis. Of these, 15$R$(1) that has not been experimentally characterized has the widest band gap ($>3.4$ eV); phonon analysis and cohesive energy reveal 15$R$(1)-SiC to be metastable. Additionally, we model the energies of valence and conduction bands of the rhombohedral SiC phases at the high-symmetry points of the Brillouin zone and predict band structure characteristics around the Fermi level. The models presented in this study may aid in identifying polytypic phases suitable for various applications, such as the design of wide-gap materials, that are relevant to high-voltage applications. In particular, the method holds promise for forecasting electronic properties of long-period and ultra-long-period polytypes for which accurate first-principles modeling is computationally challenging. △ Less

Submitted 28 August, 2023; v1 submitted 30 June, 2023; originally announced June 2023.

Comments: Major revision with new figure (FIG.2), new table (TABLE VI)

Journal ref: J. Chem. Phys. 159, 124702 (2023)

Integrated multi-operand optical neurons for scalable and hardware-efficient deep learning

Authors: Chenghao Feng, Jiaqi Gu, Hanqing Zhu, Rongxing Tang, Shupeng Ning, May Hlaing, Jason Midkiff, Sourabh Jain, David Z. Pan, Ray T. Chen

Abstract: The optical neural network (ONN) is a promising hardware platform for next-generation neuromorphic computing due to its high parallelism, low latency, and low energy consumption. However, previous integrated photonic tensor cores (PTCs) consume numerous single-operand optical modulators for signal and weight encoding, leading to large area costs and high propagation loss to implement large tensor… ▽ More The optical neural network (ONN) is a promising hardware platform for next-generation neuromorphic computing due to its high parallelism, low latency, and low energy consumption. However, previous integrated photonic tensor cores (PTCs) consume numerous single-operand optical modulators for signal and weight encoding, leading to large area costs and high propagation loss to implement large tensor operations. This work proposes a scalable and efficient optical dot-product engine based on customized multi-operand photonic devices, namely multi-operand optical neurons (MOON). We experimentally demonstrate the utility of a MOON using a multi-operand-Mach-Zehnder-interferometer (MOMZI) in image recognition tasks. Specifically, our MOMZI-based ONN achieves a measured accuracy of 85.89% in the street view house number (SVHN) recognition dataset with 4-bit voltage control precision. Furthermore, our performance analysis reveals that a 128x128 MOMZI-based PTCs outperform their counterparts based on single-operand MZIs by one to two order-of-magnitudes in propagation loss, optical delay, and total device footprint, with comparable matrix expressivity. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 19 pages, 10 figures

Effect of interpolation kernels and grid refinement on two way-coupled point-particle simulations

Authors: Nathan A. Keane, Sourabh V. Apte, Suhas S. Jain, Makrand A. Khanwale

Abstract: The predictive capability of two way--coupled point-particle Euler-Lagrange model in accurately capturing particle-flow interactions under grid refinement, wherein the particle size can be comparable to the grid size, is systematically evaluated. Two situations are considered, (i) uniform flow over a stationary particle, and (ii) decaying isotropic turbulence laden with Kolmogorov-scale particles.… ▽ More The predictive capability of two way--coupled point-particle Euler-Lagrange model in accurately capturing particle-flow interactions under grid refinement, wherein the particle size can be comparable to the grid size, is systematically evaluated. Two situations are considered, (i) uniform flow over a stationary particle, and (ii) decaying isotropic turbulence laden with Kolmogorov-scale particles. Particle-fluid interactions are modeled using only the standard drag law, typical of large density-ratio systems. A zonal, advection-diffusion-reaction (Zonal-ADR) model is used to obtain the undisturbed fluid velocity needed in the drag closure. Two main types of interpolation kernels, grid-based and particle size--based, are employed. The effect of interpolation kernels on capturing the particle-fluid interactions, kinetic energy, dissipation rate, and particle acceleration statistics are evaluated in detail. It is shown that the interpolation kernels whose width scales with the particle size perform significantly better under grid refinement than kernels whose width scales with the grid size. Convergence with respect to spatial resolution is obtained with the particle size--based kernels with and without correcting for the self-disturbance effect. While the use of particle size--based interpolation kernels provide spatial convergence and perform better than kernels that scale based on grid size, small differences can still be seen in the converged results with and without correcting for the particle self-disturbance. Such differences indicate the need for self-disturbance correction to obtain the best results, especially when the particles are larger than the grid size. △ Less

Submitted 30 March, 2023; originally announced March 2023.

Comments: Submitted to International Journal of Multiphase Flow

Journal ref: International Journal of Multiphase Flow, Volume 166, 2023, 104517

Force Dipole Interactions in Tubular Fluid Membranes

Authors: Samyak Jain, Rickmoy Samanta

Abstract: We construct viscous fluid flow sourced by a force dipole embedded in a cylindrical fluid membrane, coupled to external embedding fluids. We find analytic expressions for the flow, in the limit of infinitely long and thin tubular membranes. We utilize this solution to formulate the in-plane dynamics of a pair of pusher-type dipoles along the cylinder surface. We find that a mutually perpendicular… ▽ More We construct viscous fluid flow sourced by a force dipole embedded in a cylindrical fluid membrane, coupled to external embedding fluids. We find analytic expressions for the flow, in the limit of infinitely long and thin tubular membranes. We utilize this solution to formulate the in-plane dynamics of a pair of pusher-type dipoles along the cylinder surface. We find that a mutually perpendicular dipole pair generically move together along helical geodesics. Since the cylindrical geometry breaks the in-plane rotational symmetry of the membrane, there is a difference in flows along the axial and transverse directions of the cylinder. This in turn leads to anisotropic hydrodynamic interaction between the dipoles and is remarkably different from flat and spherical fluid membranes. In particular, the flow along the compact direction of the cylinder has a local rigid rotation term (independent of the angular coordinate but decays along the axis of the cylinder). Due to this feature of the flow, we observe that the interacting dipole pair initially situated along the axial direction exhibits an overall drift along the compact angular direction of the tubular fluid membrane. We find that the drift for the dipole pair increases linearly with time. Our results are relevant for non-equilibrium dynamics of motor proteins in tubular membranes arising in nature, as well as in-vitro experiments (25). △ Less

Submitted 21 June, 2023; v1 submitted 21 March, 2023; originally announced March 2023.

Pulse Parameter Optimization Method for Ultra High Dose Rate Electron Treatment

Authors: Sagarika Jain, Ashley Cetnar, Jeffrey Woollard, Nilendu Gupta, Dukag** Blakaj, Arnab Chakravarti, Ahmet S. Ayan

Abstract: Purpose: Commercial UHDR platforms deliver Ultra-High Dose Rate (UHDR) doses at discrete combinations of pulse parameters including pulse width (PW), pulse repetition frequency (PRF) and number of pulses (N), which dictate unique combinations of dose and dose rates. Currently, obtaining pulse parameters for the desired dose and dose rate is a cumbersome manual process involving creating, updating,… ▽ More Purpose: Commercial UHDR platforms deliver Ultra-High Dose Rate (UHDR) doses at discrete combinations of pulse parameters including pulse width (PW), pulse repetition frequency (PRF) and number of pulses (N), which dictate unique combinations of dose and dose rates. Currently, obtaining pulse parameters for the desired dose and dose rate is a cumbersome manual process involving creating, updating, and looking up values in large spreadsheets for every treatment configuration. The purpose of this work is to present a pulse parameter optimizer application to match intended dose and dose rate precisely and efficiently. Methods: Dose and dose rate calculation have been described for a commercial electron FLASH platform. A constrained optimization for the dose and dose rate cost function was modelled as a mixed integer problem in MATLAB (The MathWorks Inc., Version9.13.0 R2022b, Natick, Massachusetts). The beam and machine data required for the application were acquired using GafChromic film and Alternating Current Current Transformers (ACCTs). Variables for optimization included dose per pulse (DPP) for every collimator at a specific treatment configuration, PW and PRF measured using ACCT, and airgap factors. Results: Using PW, PRF, N and airgap factors as the parameters, the application was created to optimize for dose and dose rate. Largely automating dose and dose rate calculation reduces safety concerns associated with manual look up and calculation of these parameters, especially when many subjects at different doses and dose rates are to be safely managed. Conclusion: A pulse parameter optimization application was built in MATLAB for a commercial electron UHDR platform to increase efficiency in the dose, dose rate, and pulse parameter prescription process. △ Less

Submitted 18 April, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Fick-Jacobs description and first passage dynamics for diffusion in a channel under stochastic resetting

Authors: Siddharth Jain, Denis Boyer, Arnab Pal, Leonardo Dagdug

Abstract: Transport of particles through channels is of paramount importance in physics, chemistry and surface science due to its broad real world applications. Much insights can be gained by observing the transition paths of a particle through a channel and collecting statistics on the lifetimes in the channel or the escape probabilities from the channel. In this paper, we consider the diffusive transport… ▽ More Transport of particles through channels is of paramount importance in physics, chemistry and surface science due to its broad real world applications. Much insights can be gained by observing the transition paths of a particle through a channel and collecting statistics on the lifetimes in the channel or the escape probabilities from the channel. In this paper, we consider the diffusive transport through a narrow conical channel of a Brownian particle subject to intermittent dynamics, namely, stochastic resetting. As such, resetting brings the particle back to a desired location from where it resumes its diffusive phase. To this end, we extend the Fick-Jacobs theory of channel-facilitated diffusive transport to resetting-induced transport. Exact expressions for the conditional mean first passage times, escape probabilities and the total average lifetime in the channel are obtained, and their behaviour as a function of the resetting rate are highlighted. It is shown that resetting can expedite the transport through the channel -- rigorous constraints for such conditions are then illustrated. Furthermore, we observe that a carefully chosen resetting rate can render the average lifetime of the particle inside the channel minimal. Interestingly, the optimal rate undergoes continuous and discontinuous transitions as some relevant system parameters are varied. The validity of our one-dimensional analysis and the corresponding theoretical predictions are supported by three-dimensional Brownian dynamics simulations. We thus believe that resetting can be useful to facilitate particle transport across biological membranes -- a phenomena that can spearhead further theoretical and experimental studies. △ Less

Submitted 15 November, 2022; originally announced November 2022.

Journal ref: The Journal of Chemical Physics 158, 054113 (2023)

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Fleet-Level Environmental Assessments for Feasibility of Aviation Emission Reduction Goals

Authors: Kolawole Ogunsina, Hsun Chao, Nithin Jojo Kolencherry, Samarth Jain, Kushal Moolchandani, Daniel DeLaurentis, William Crossley

Abstract: The International Air Transport Association (IATA) is one of several organizations that have presented goals for future CO2 emissions from commercial aviation with the intent of alleviating the associated environmental impacts. These goals include attaining carbon-neutral growth in the year 2020 and total aviation CO2 emissions in 2050 equal to 50% of 2005 aviation CO2 emissions. This paper presen… ▽ More The International Air Transport Association (IATA) is one of several organizations that have presented goals for future CO2 emissions from commercial aviation with the intent of alleviating the associated environmental impacts. These goals include attaining carbon-neutral growth in the year 2020 and total aviation CO2 emissions in 2050 equal to 50% of 2005 aviation CO2 emissions. This paper presents the use of a simulation-based approach to predict future CO2 emissions from commercial aviation based upon a set of scenarios developed as part of the Aircraft Technology Modeling and Assessment project within ASCENT, the FAA Center of Excellence for Alternative Jet Fuels and the Environment. Results indicate that, in future scenarios with increasing demand for air travel, it is difficult to reduce CO2 emissions in 2050 to levels equal to or below 2005 levels, although neutral CO2 growth after 2020 may be possible. △ Less

Submitted 16 September, 2022; originally announced October 2022.

Comments: Presented at the Council of Engineering Systems Universities (CESUN) conference in 2018

Spectral analysis of multidimensional current-driven plasma instabilities and turbulence in hollow cathode plumes

Authors: Wai Hong Ronald Chan, Ken Hara, Jonathan M. Wang, Suhas S. Jain, Shahab Mirjalili, Iain D. Boyd

Abstract: Large-amplitude current-driven instabilities in hollow cathode plumes can generate energetic ions responsible for cathode sputtering and spacecraft degradation. A 2D2V (two dimensions each in configuration [D] and velocity [V] spaces) grid-based Vlasov--Poisson (direct kinetic) solver is used to study their growth and saturation, which comprises four stages: linear growth, quasilinear resonance, n… ▽ More Large-amplitude current-driven instabilities in hollow cathode plumes can generate energetic ions responsible for cathode sputtering and spacecraft degradation. A 2D2V (two dimensions each in configuration [D] and velocity [V] spaces) grid-based Vlasov--Poisson (direct kinetic) solver is used to study their growth and saturation, which comprises four stages: linear growth, quasilinear resonance, nonlinear fill-in, and saturated turbulence. The linear modal growth rate, nonlinear saturation process, and ion velocity and energy distribution features in the turbulent regime are analyzed. Backstreaming ions are generated for large electron drifts, several ion acoustic periods after the potential field becomes turbulent. Interscale phase-space transfer and locality are analyzed for the Vlasov equation. The multidimensional study sheds light on the interactions between longitudinal and transverse plasma instabilities, as well as the inception of plasma turbulence. △ Less

Submitted 20 November, 2022; v1 submitted 20 October, 2022; originally announced October 2022.

Comments: Center for Turbulence Research Proceedings of the Summer Program 2022

ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider

Authors: ATHENA Collaboration, J. Adam, L. Adamczyk, N. Agrawal, C. Aidala, W. Akers, M. Alekseev, M. M. Allen, F. Ameli, A. Angerami, P. Antonioli, N. J. Apadula, A. Aprahamian, W. Armstrong, M. Arratia, J. R. Arrington, A. Asaturyan, E. C. Aschenauer, K. Augsten, S. Aune, K. Bailey, C. Baldanza, M. Bansal, F. Barbosa, L. Barion , et al. (415 additional authors not shown)

Abstract: ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e… ▽ More ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges. △ Less

Submitted 13 October, 2022; originally announced October 2022.

Journal ref: JINST 17 (2022) 10, P10019

Lab-on-a-Chip Optical Biosensor Platform: Micro Ring Resonator Integrated with Near-Infrared Fourier Transform Spectrometer

Authors: Kyoung Min Yoo, May Hlaing, Sourabh Jain, James Fan, Yue An, Ray T. Chen

Abstract: A micro-ring-resonator (MRR) optical biosensor based on the evanescent field sensing mechanism has been extensively studied due to its high sensitivity and compact device size. However, a suitable on-chip integrated spectrometer device has to be demonstrated for the lab-on-a-chip applications, which can read the resonance wavelength shift from MRR biosensors based on minuscule changes in refractiv… ▽ More A micro-ring-resonator (MRR) optical biosensor based on the evanescent field sensing mechanism has been extensively studied due to its high sensitivity and compact device size. However, a suitable on-chip integrated spectrometer device has to be demonstrated for the lab-on-a-chip applications, which can read the resonance wavelength shift from MRR biosensors based on minuscule changes in refractive index. In this paper, we demonstrated the design and experimental results of the near-infrared lab-on-a-chip optical biosensor platform that monolithically integrates the MRR and the on-chip spectrometer on the silicon-on-insulator (SOI) wafer, which can eliminate the external optical spectrum analyzer for scanning the wavelength spectrum. The symmetric add-drop MRR biosensor is designed to have a free spectral range (FSR) of ~19 nm, and a bulk sensitivity of ~73 nm/RIU; then the drop-port output resonance peaks are reconstructed from the integrated spatial-heterodyne Fourier transform spectrometer (SHFTS) with the spectral resolution of ~3.1 nm and bandwidth of ~50 nm, which results in the limit of detection of 0.042 RIU. The MRR output spectrum with air- and water-claddings are measured and reconstructed from the MRR-SHFTS integrated device experimentally to validate the wavelength shifting measurement. △ Less

Submitted 15 July, 2022; originally announced July 2022.

Comments: 23 pages, 9 figures including supplementary

Dielectric-Modulated Double Gate Bilayer Electrode Organic Thin Film Transistor-based Biosensor for Label-Free Detection: Simulation Study and Sensitivity Analysis

Authors: Sushil Kumar Jain, Amit M. Joshi

Abstract: A dielectric-modulated double gate bilayer electrodes organic thin-film transistor (DMDGBE-OTFT) based sensor is proposed for label-free biomolecule detection. The double gate of DMDGBE-OTFT is used for creating two symmetrical gates underlap regions on both sides of the organic semiconductor. The parallel immobilization of biomolecule in two gates underlaps region changes the on-current (ION) of… ▽ More A dielectric-modulated double gate bilayer electrodes organic thin-film transistor (DMDGBE-OTFT) based sensor is proposed for label-free biomolecule detection. The double gate of DMDGBE-OTFT is used for creating two symmetrical gates underlap regions on both sides of the organic semiconductor. The parallel immobilization of biomolecule in two gates underlaps region changes the on-current (ION) of the DMDGBEOTFT. Bilayer electrode is also used for significant reduction of barrier height to enhance the performance of the proposed device. The change in the drain current has been utilized to evaluate the sensitivity of the DMDGBE-OTFT for biomolecule recognition having different dielectric constants and corresponding charge densities using 2-D physics-based numerical simulation when biomolecules are immobilized in the gate underlap area. The ATLAS TCAD tool is used to investigate the sensitivity performance of the DMDGBE-OTFT. The proposed DMDGBE-OTFT has 24.2% higher sensitivity in comparison to the recently reported OTFT-based biosensors for label-free detection of biomolecules. The DMDGBE-OTFT biosensor has a lot of potential for flexible biosensing applications in the future because of its flexibility, high sensitivity, biocompatibility and low cost. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Comments: 16 pages, 11 Figures, 4 Tables

A kinetic energy--and entropy-preserving scheme for compressible two-phase flows

Authors: Suhas S. Jain, Parviz Moin

Abstract: Accurate numerical modeling of compressible flows, particularly in the turbulent regime, requires a method that is non-dissipative and stable at high Reynolds ($Re$) numbers. For a compressible flow, it is known that discrete conservation of kinetic energy is not a sufficient condition for numerical stability, unlike in incompressible flows. In this study, we adopt the recently developed conserv… ▽ More Accurate numerical modeling of compressible flows, particularly in the turbulent regime, requires a method that is non-dissipative and stable at high Reynolds ($Re$) numbers. For a compressible flow, it is known that discrete conservation of kinetic energy is not a sufficient condition for numerical stability, unlike in incompressible flows. In this study, we adopt the recently developed conservative diffuse-interface method (Jain, Mani $\&$ Moin, $\textit{J. Comput. Phys.}$, 2020) along with the five-equation model for the simulation of compressible two-phase flows. This method discretely conserves the mass of each phase, momentum, and total energy of the system. We here propose discrete consistency conditions between the numerical fluxes, such that any set of numerical fluxes that satisfy these conditions would not spuriously contribute to the kinetic energy and entropy of the system. We also present a set of numerical fluxes\textemdash which satisfies these consistency conditions\textemdash that results in an exact conservation of kinetic energy and approximate conservation of entropy in the absence of pressure work, viscosity, thermal diffusion effects, and time-discretization errors. Since the model consistently reduces to the single-phase Navier-Stokes system when the properties of the two phases are identical, the proposed consistency conditions and numerical fluxes are also applicable for a broader class of single-phase flows. To this end, we present coarse-grid numerical simulations of compressible single-phase and two-phase turbulent flows at infinite $Re$, to illustrate the stability of the proposed method in canonical test cases, such as an isotropic turbulence and Taylor-Green vortex flows. A higher-resolution simulation of a droplet-laden compressible decaying isotropic turbulence is also presented, and the effect of the presence of droplets on the flow is analyzed. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: 36 pages, 14 figures, under review in the journal of computational physics

Journal ref: Journal of Computational Physics 2022

Prediction of drag components on rough surfaces using effective models

Authors: Sahaj Jain, Y. Sudhakar

Abstract: Owing to the multiscale nature and the consequent high computational cost associated with simulations of flows over rough surfaces, effective models are being developed as a practical means of dealing with such flows. Existing effective models focus primarily on accurately predicting interface velocities using slip length. Moreover, they are concerned mainly with flat interfaces and do not directl… ▽ More Owing to the multiscale nature and the consequent high computational cost associated with simulations of flows over rough surfaces, effective models are being developed as a practical means of dealing with such flows. Existing effective models focus primarily on accurately predicting interface velocities using slip length. Moreover, they are concerned mainly with flat interfaces and do not directly address the drag computation. In this work, we formulate the Transpiration-Resistance model in polar coordinates and address the challenge of computing drag components on rough surfaces. Like slip length, we introduce two constitutive parameters called shear and pressure correction factors that encompass information about how the total drag is partitioned into viscous and pressure components. Computation of these non-empirical parameters does not necessitate solving additional microscale problems; they can be obtained from the same microscale problem used for the slip-length calculation. We demonstrate the effectiveness of the proposed parameters for the Couette flow over rough surfaces. Moreover, using the flow over a rough cylinder as an example, we present the accuracy of predicting interface velocity and drag components by comparing the effective model results with those obtained from geometry-resolved simulations. Numerical simulations presented in this paper prove that we can accurately capture both viscous and pressure drag over rough surfaces for flat- and circular-interface problems by using the proposed constitutive parameters. △ Less

Submitted 17 June, 2022; v1 submitted 26 April, 2022; originally announced April 2022.

Comments: 20 pages, 8 figures

A Unified Description for Polarization-Transfer Mechanisms in Magnetic Resonance in Static Solids: Cross Polarization and DNP

Authors: Zhenfeng Pang, Sheetal Jain, Chen Yang, Xueqian Kong, Kong Ooi Tan

Abstract: Polarization transfers are crucial building blocks in magnetic resonance experiments, i.e., they can be used to polarize insensitive nuclei and correlate nuclear spins in multidimensional NMR spectroscopy. The polarization can be transferred either across different nuclear spin species or from electron spins to the relatively low-polarized nuclear spins. The former route occurring in solid-state N… ▽ More Polarization transfers are crucial building blocks in magnetic resonance experiments, i.e., they can be used to polarize insensitive nuclei and correlate nuclear spins in multidimensional NMR spectroscopy. The polarization can be transferred either across different nuclear spin species or from electron spins to the relatively low-polarized nuclear spins. The former route occurring in solid-state NMR (ssNMR) can be performed via cross polarization (CP), while the latter route is known as dynamic nuclear polarization (DNP). Despite having different operating conditions, we opinionate that both mechanisms are theoretically similar processes in ideal conditions, i.e., the electron is merely another spin-1/2 particle with a much higher gyromagnetic ratio. Here, we show that the CP and DNP processes can be described using a unified theory based on average Hamiltonian theory (AHT) combined with fictitious operators. The intuitive and unified approach has allowed new insights on the cross effect (CE) DNP mechanism, leading to better design of DNP polarizing agents and extending the applications beyond just hyperpolarization. We explore the possibility of exploiting theoretically predicted DNP transients for electron-nucleus distance measurements--like routine dipolar-recoupling experiments in solid-state NMR. △ Less

Submitted 21 March, 2022; originally announced March 2022.

Comments: 31 pages; 7 figures

Accurate conservative phase-field method for simulation of two-phase flows

Authors: Suhas S. Jain

Abstract: In this work, we propose a novel phase-field model for the simulation of two-phase flows that is accurate, conservative, bounded, and robust. The proposed model conserves the mass of each of the phases, and results in bounded transport of the volume fraction. We present results from the canonical test cases of a drop advection and a drop in a shear flow, showing significant improvement in the accu… ▽ More In this work, we propose a novel phase-field model for the simulation of two-phase flows that is accurate, conservative, bounded, and robust. The proposed model conserves the mass of each of the phases, and results in bounded transport of the volume fraction. We present results from the canonical test cases of a drop advection and a drop in a shear flow, showing significant improvement in the accuracy over the commonly used conservative phase-field method. Moreover, the proposed model imposes a lesser restrictive Courant-Friedrichs-Lewy condition, and hence, is less expensive compared to other conservative phase-field models. We also propose improvements on computation of surface tension forces and show that the proposed improvement significantly reduces the magnitude of spurious velocities at the interface. We also derive a consistent and conservative momentum transport equation for the proposed phase-field model and show that the proposed model when coupled with the consistent momentum transport equation results in discrete conservation of kinetic energy, which is a sufficient condition for the numerical stability of incompressible flows, in the absence of dissipative mechanisms. To illustrate the robustness of the method in simulating high-density ratio turbulent two-phase flows, we present the numerical simulations of high-density ratio droplet-laden isotropic turbulence at finite and infinite Reynolds numbers. △ Less

Submitted 20 August, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: 29 pages, 12 figures

Journal ref: Journal of Computational Physics, 2022

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Assessment of diffuse-interface methods for compressible multiphase fluid flows and elastic-plastic deformation in solids

Authors: Suhas S. Jain, Michael C. Adler, Jacob R. West, Ali Mani, Parviz Moin, Sanjiva K. Lele

Abstract: This work describes three diffuse-interface methods for the simulation of immiscible, compressible multiphase fluid flows and elastic-plastic deformation in solids. The first method is the localized-artificial-diffusivity approach of Cook (2007), Subramaniam et al., (2018), and Adler and Lele (2019), in which artificial diffusion terms are added to the conservation equations. The second method is… ▽ More This work describes three diffuse-interface methods for the simulation of immiscible, compressible multiphase fluid flows and elastic-plastic deformation in solids. The first method is the localized-artificial-diffusivity approach of Cook (2007), Subramaniam et al., (2018), and Adler and Lele (2019), in which artificial diffusion terms are added to the conservation equations. The second method is the gradient-form approach that is based on the quasi-conservative method of Shukla et al., (2010) and Tiwari et al., (2013), in which the diffusion and sharpening terms (together called regularization terms) are added to the conservation equations. The third approach is the divergence-form approach that is based on the fully conservative method of Jain et al., (2020), in which the regularization terms are added to the conservation equations. The primary objective of this work is to compare these three methods in terms of their ability to maintain: constant interface thickness; the conservation property; and accurate interface shape for long-time integration. The second objective of this work is to consistently extend these methods to model interfaces between solid materials with strength. To assess and compare the methods, they are used to simulate a wide variety of problems, including (1) advection of an air bubble in water, (2) shock interaction with a helium bubble in air, (3) shock interaction and the collapse of an air bubble in water, and (4) Richtmyer-Meshkov instability of a copper-aluminum interface. The current work focuses on comparing these methods in the limit of relatively coarse grid resolution, which illustrates the true performance of these methods. This is because it is rarely practical to use hundreds of grid points to resolve a single bubble or drop in large-scale simulations of engineering interest. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Comments: 37 pages, 12 figures, submission for journal of computational physics

An infectious diseases hazard map for India based on mobility and transportation networks

Authors: Onkar Sadekar, Mansi Budamagunta, G. J. Sreejith, Sachin Jain, M. S. Santhanam

Abstract: We propose a risk measure and construct an infectious diseases hazard map for India. Given an outbreak location, a hazard index is assigned to each city using an effective distance that depends on inter-city mobilities instead of geographical distance. We demonstrate its utility using an SIR model augmented with air, rail, and road data between top 446 cities. Simulations show that the effective d… ▽ More We propose a risk measure and construct an infectious diseases hazard map for India. Given an outbreak location, a hazard index is assigned to each city using an effective distance that depends on inter-city mobilities instead of geographical distance. We demonstrate its utility using an SIR model augmented with air, rail, and road data between top 446 cities. Simulations show that the effective distance from outbreak location reliably predicts the time of arrival of infection in other cities. The hazard index predictions compare well with the observed spread of SARS-CoV-2. The hazard map can be useful in other outbreaks also. △ Less

Submitted 4 August, 2021; v1 submitted 24 May, 2021; originally announced May 2021.

Comments: 25 pages, 8 figures, including supplementary material

Journal ref: Current Science 121, 1208 (2021)

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

Forbidden atomic oxygen emissions in the Martian dayside upper atmosphere

Authors: Susarla Raghuram, Sonal Kumar Jain, Anil Bhardwaj

Abstract: Recently, Nadir and Occultation for Mars Discovery (NOMAD) ultraviolet and visible spectrometer instrument on board the European Space Agency's ExoMars Trace Gas Orbiter (TGO) simultaneously measured the limb emission intensities for both [OI] 2972 and 5577 Å (green) emissions in the dayside of Martian upper atmosphere. We aim to explore the photochemistry of all these forbidden atomic oxygen emis… ▽ More Recently, Nadir and Occultation for Mars Discovery (NOMAD) ultraviolet and visible spectrometer instrument on board the European Space Agency's ExoMars Trace Gas Orbiter (TGO) simultaneously measured the limb emission intensities for both [OI] 2972 and 5577 Å (green) emissions in the dayside of Martian upper atmosphere. We aim to explore the photochemistry of all these forbidden atomic oxygen emissions ([OI] 2972, 5577, 6300, 6464 Å) in the Martian daylight upper atmosphere and suitable conditions for the simultaneous detection of these emissions lines in the dayside visible spectra. A photochemical model is developed to study the production and loss processes of O(1S) and O(1D) by incorporating various chemical reactions of different O-bearing species in the upper atmosphere of Mars. By reducing Fox (2004) modelled neutral density profiles by a factor of 2, the calculated limb intensity profiles for [OI] 5577 and 2972 Å emissions are found to be consistent with the NOMAD-TGO observations. In this case, at altitudes below 120 km, our modelled limb intensity for [OI] 6300 Å emission is smaller by a factor 2 to 5 compared to that of NOMAD-TGO observation for [OI] 2972 Å emission, and above this distance it is comparable with the upper limit of the observation. We studied various parameters which can influence the limb intensities of these atomic oxygen forbidden emission lines. Our calculated limb intensity for [OI] 6300 Å emission, when the Mars is at near perihelion and for solar maximum condition, suggests that all these forbidden emissions should be observable in the NOMAD-TGO visible spectra taken on the dayside of Martian upper atmosphere. More simultaneous observations of forbidden atomic oxygen emission lines will help to understand the photochemical processes of oxygen-bearing species in the dayside Martian upper atmosphere. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 12 pages, 5 figures

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

Clustering and ordering in cell assemblies with generic asymmetric aligning interactions

Authors: Thibault Bertrand, Joseph d'Alessandro, Ananyo Maitra, Shreyansh Jain, Barbara Mercier, René-Marc Mège, Benoit Ladoux, Raphaël Voituriez

Abstract: Collective cell migration plays an essential role in various biological processes, such as development or cancer proliferation. While cell-cell interactions are clearly key determinants of collective cell migration -- in addition to individual cells self-propulsion -- the physical mechanisms that control the emergence of cell clustering and collective cell migration are still poorly understood. In… ▽ More Collective cell migration plays an essential role in various biological processes, such as development or cancer proliferation. While cell-cell interactions are clearly key determinants of collective cell migration -- in addition to individual cells self-propulsion -- the physical mechanisms that control the emergence of cell clustering and collective cell migration are still poorly understood. In particular, observations have shown that binary cell-cell collisions generally lead to anti-alignement of cell polarities and separation of pairs -- a process called contact inhibition of locomotion (CIL), which is expected to disfavor the formation of large scale cell clusters with coherent motion. Here, we adopt a joint experimental and theoretical approach to determine the large scale dynamics of cell assemblies from elementary pairwise cell-cell interaction rules. We quantify experimentally binary cell-cell interactions and show that they can be captured by a minimal equilibrium-like pairwise asymmetric aligning interaction potential that reproduces the CIL phenomenology. We identify its symmetry class, build the corresponding active hydrodynamic theory and show on general grounds that such asymmetric aligning interaction destroys large scale clustering and ordering, leading instead to a liquid-like microphase of cell clusters of finite size and short lived polarity, or to a fully dispersed isotropic phase. Finally, this shows that CIL-like asymmetric interactions in cellular systems -- or general active systems -- control cluster sizes and polarity, and can prevent large scale coarsening and long range polarity, except in the singular regime of dense confluent systems. △ Less

Submitted 1 December, 2020; originally announced December 2020.

Comments: 11 pages, 5 figures

Modeling transport of scalars in two-phase flows with a diffuse-interface method

Authors: Suhas S. Jain, Ali Mani

Abstract: In this article, we propose a novel scalar-transport model for the simulation of scalar quantities in two-phase flows with a phase-field method (diffuse-interface method). In a two-phase flow, the scalar quantities typically have disparate properties in two phases, which results in effective confinement of the scalar quantities in one of the phases, in the time scales of interest. This confinement… ▽ More In this article, we propose a novel scalar-transport model for the simulation of scalar quantities in two-phase flows with a phase-field method (diffuse-interface method). In a two-phase flow, the scalar quantities typically have disparate properties in two phases, which results in effective confinement of the scalar quantities in one of the phases, in the time scales of interest. This confinement of the scalars lead to the formation of sharp gradients of the scalar concentration values at the interface, presenting a serious challenge for its numerical simulations. To overcome this challenge, we propose a model for the transport of scalars. The model is discretized using a central-difference scheme, which leads to a non-dissipative implementation that is crucial for the simulation of turbulent flows. Furthermore, the provable strengths of the proposed model are: (a) the model maintains the positivity property of the scalar concentration field, a physical realizability requirement for the simulation of scalars, when the proposed criterion is satisfied, (b) the proposed model is such that the transport of the scalar concentration field is consistent with the transport of the volume fraction field, which results in the enforcement of the effective zero-flux boundary condition for the scalar at the interface; and therefore, prevents the artificial numerical diffusion of the scalar across the interface. Finally, we present numerical simulations using the proposed model in a wide range of two-phase flow regimes, spanning laminar to turbulent flows; and assess: the accuracy and robustness of the model, the validity of the positivity property of the scalar concentration field, and the enforcement of the zero-flux boundary condition for the scalar at the interface. △ Less

Submitted 20 November, 2020; originally announced November 2020.

Comments: 38 pages, 24 figures, submitted to the journal of computational physics

Valley-Coupled-Spintronic Non-Volatile Memories with Compute-In-Memory Support

Authors: Sandeep Thirumala, Yi-Tse Hung, Shubham Jain, Arnab Raha, Niharika Thakuria, Vijay Raghunathan, Anand Raghunathan, Zhihong Chen, Sumeet Gupta

Abstract: In this work, we propose valley-coupled spin-hall memories (VSH-MRAMs) based on monolayer WSe2. The key features of the proposed memories are (a) the ability to switch magnets with perpendicular magnetic anisotropy (PMA) via VSH effect and (b) an integrated gate that can modulate the charge/spin current (IC/IS) flow. The former attribute results in high energy efficiency (compared to the Giant-Spi… ▽ More In this work, we propose valley-coupled spin-hall memories (VSH-MRAMs) based on monolayer WSe2. The key features of the proposed memories are (a) the ability to switch magnets with perpendicular magnetic anisotropy (PMA) via VSH effect and (b) an integrated gate that can modulate the charge/spin current (IC/IS) flow. The former attribute results in high energy efficiency (compared to the Giant-Spin Hall (GSH) effect-based devices with in-plane magnetic anisotropy (IMA) magnets). The latter feature leads to a compact access transistor-less memory array design. We experimentally measure the gate controllability of the current as well as the nonlocal resistance associated with VSH effect. Based on the measured data, we develop a simulation framework (using physical equations) to propose and analyze single-ended and differential VSH effect based magnetic memories (VSH-MRAM and DVSH-MRAM, respectively). At the array level, the proposed VSH/DVSH-MRAMs achieve 50%/ 11% lower write time, 59%/ 67% lower write energy and 35%/ 41% lower read energy at iso-sense margin, compared to single ended/differential (GSH/DGSH)-MRAMs. System level evaluation in the context of general purpose processor and intermittently-powered system shows up to 3.14X and 1.98X better energy efficiency for the proposed (D)VSH-MRAMs over (D)GSH-MRAMs respectively. Further, the differential sensing of the proposed DVSH-MRAM leads to natural and simultaneous in-memory computation of bit-wise AND and NOR logic functions. Using this feature, we design a computation-in-memory (CiM) architecture that performs Boolean logic and addition (ADD) with a single array access. System analysis performed by integrating our DVSH-MRAM: CiM in the Nios II processor across various application benchmarks shows up to 2.66X total energy savings, compared to DGSH-MRAM: CiM. △ Less

Submitted 17 December, 2019; originally announced December 2019.

A conservative diffuse-interface method for compressible two-phase flows

Authors: Suhas S. Jain, Ali Mani, Parviz Moin

Abstract: In this article, we propose a novel conservative diffuse-interface method for the simulation of immiscible compressible two-phase flows. The proposed method discretely conserves the mass of each phase, momentum and total energy of the system. We use the baseline five-equation model and propose interface-regularization (diffusion--sharpening) terms in such a way that the resulting model maintains t… ▽ More In this article, we propose a novel conservative diffuse-interface method for the simulation of immiscible compressible two-phase flows. The proposed method discretely conserves the mass of each phase, momentum and total energy of the system. We use the baseline five-equation model and propose interface-regularization (diffusion--sharpening) terms in such a way that the resulting model maintains the conservative property of the underlying baseline model; and lets us use a central-difference scheme for the discretization of all the operators in the model, which leads to a non-dissipative implementation that is crucial for the simulation of turbulent flows and acoustics. Furthermore, the provable strengths of the proposed model are: (a) the model maintains the boundedness property of the volume fraction field, which is a physical realizability requirement for the simulation of two-phase flows, (b) the proposed model is such that the transport of volume fraction field inherently satisfies the total-variation-diminishing property without having to add any flux limiters that destroy the non-dissipative nature of the scheme, (c) the proposed interface-regularization terms in the model do not spuriously contribute to the kinetic energy of the system and therefore do not affect the non-linear stability of the numerical simulation, and (d) the model is consistent with the second law of thermodynamics. Finally, we present numerical simulations using the model and assess (a) the accuracy of evolution of the interface shape, (b) implementation of surface tension effects, (c) propagation of acoustics and their interaction with material interfaces, (d) the accuracy and robustness of the numerical scheme for simulation of complex high-Reynolds-number flows, and (e) performance and scalability of the method. △ Less

Submitted 8 June, 2020; v1 submitted 9 November, 2019; originally announced November 2019.

Comments: 50 pages, 24 figures

Journal ref: Journal of Computational Physics (2020)

The Science of Murray Gell-Mann

Authors: Sanjay Jain, Spenta R. Wadia

Abstract: This article summarizes some of the most important scientific contributions of Murray Gell-Mann (1929-2019). (Invited article for Current Science, Indian Academy of Sciences.) This article summarizes some of the most important scientific contributions of Murray Gell-Mann (1929-2019). (Invited article for Current Science, Indian Academy of Sciences.) △ Less

Submitted 16 September, 2019; originally announced September 2019.

Comments: 11 pages, 1 figure, 3 photographs

Journal ref: CURRENT SCIENCE, Vol.117, No. 7, 10 October 2019, pp. 1224 - 1231

Detailed numerical simulations of atomization of a liquid jet in a swirling gas crossflow

Authors: Surya R Prakash, Suhas S Jain, Jeffery A. Lovett, B N Raghunandan, R V Ravikrishna, Gaurav Tomar

Abstract: Breakup of a liquid jet in a high speed gaseous crossflow finds wide range of engineering and technological applications, especially in the combustors of the gas turbine engines in aerospace industry. In this study, we present volume-of-fluid method based direct numerical simulations of a liquid jet injected into a swirling crossflow of gas. The liquid is injected radially outwards from a central… ▽ More Breakup of a liquid jet in a high speed gaseous crossflow finds wide range of engineering and technological applications, especially in the combustors of the gas turbine engines in aerospace industry. In this study, we present volume-of-fluid method based direct numerical simulations of a liquid jet injected into a swirling crossflow of gas. The liquid is injected radially outwards from a central tube to a confined annular space with a swirling gas crossflow. The essential features of the jet breakup involving jet flattening, surface waves and strip** of droplets from the edges of the jet are captured in the simulations. We discuss the effect of swirl on the spray characteristics such as jet trajectory, column breakup-length, and size, shape-factor and velocity distribution of the drops. Drop size increases with swirl and penetration is slightly reduced. Moreover, the trajectory follows an angle (azimuthal) that is smaller than the geometric angle of the swirl at the inlet. Interestingly, we also observe coalescence events downstream of the jet that affect the final droplet size distribution for the geometry considered in this study. △ Less

Submitted 2 January, 2020; v1 submitted 25 June, 2019; originally announced June 2019.

Comments: 30 pages, 26 figures, Published in Atomization and Sprays

Journal ref: Atomization and Sprays 2019

A conservative and non-dissipative Eulerian formulation for the simulation of soft solids in fluids

Authors: Suhas S. Jain, Ken Kamrin, Ali Mani

Abstract: Soft solids in fluids find wide range of applications in science and engineering, especially in the study of biological tissues and membranes. In this study, an Eulerian finite volume approach has been developed to simulate fully resolved incompressible hyperelastic solids immersed in a fluid. We have adopted the recently developed reference map technique (RMT) by Valkov et. al (J. Appl. Mech., 82… ▽ More Soft solids in fluids find wide range of applications in science and engineering, especially in the study of biological tissues and membranes. In this study, an Eulerian finite volume approach has been developed to simulate fully resolved incompressible hyperelastic solids immersed in a fluid. We have adopted the recently developed reference map technique (RMT) by Valkov et. al (J. Appl. Mech., 82, 2015) and assessed multiple improvements for this approach.These modifications maintain the numerical robustness of the solver and allow the simulations without any artificial viscosity in the solid regions (to stabilize the solver). This has also resulted in eliminating the striations ("wrinkles") of the fluid-solid interface that was seen before and hence obviates the need for any additional routines to achieve a smooth interface. An approximate projection method has been used to project the velocity field onto a divergence free field. Cost and accuracy improvements of the modifications on the method have also been discussed. △ Less

Submitted 16 September, 2019; v1 submitted 21 February, 2019; originally announced February 2019.

Journal ref: Journal of Computational Physics 2019

Droplets in homogeneous shear turbulence

Authors: Marco E. Rosti, Zhouyang Ge, Suhas S. Jain, Michael S. Dodd, Luca Brandt

Abstract: We simulate the flow of two immiscible and incompressible fluids separated by an interface in a homogeneous turbulent shear flow at a shear Reynolds number equal to 15200. The viscosity and density of the two fluids are equal, and various surface tensions and initial droplet diameters are considered in the present study. We show that the two-phase flow reaches a statistically stationary turbulent… ▽ More We simulate the flow of two immiscible and incompressible fluids separated by an interface in a homogeneous turbulent shear flow at a shear Reynolds number equal to 15200. The viscosity and density of the two fluids are equal, and various surface tensions and initial droplet diameters are considered in the present study. We show that the two-phase flow reaches a statistically stationary turbulent state sustained by a non-zero mean turbulent production rate due to the presence of the mean shear. Compared to single-phase flow, we find that the resulting steady state conditions exhibit reduced Taylor microscale Reynolds numbers owing to the presence of the dispersed phase, which acts as a sink of turbulent kinetic energy for the carrier fluid. At steady state, the mean power of surface tension is zero and the turbulent production rate is in balance with the turbulent dissipation rate, with their values being larger than in the reference single-phase case. The interface modifies the energy spectrum by introducing energy at small-scales, with the difference from the single-phase case reducing as the Weber number increases. This is caused by both the number of droplets in the domain and the total surface area increasing monotonically with the Weber number. This reflects also in the droplets size distribution which changes with the Weber number, with the peak of the distribution moving to smaller sizes as the Weber number increases. We show that the Hinze estimate for the maximum droplet size, obtained considering breakup in homogeneous isotropic turbulence, provides an excellent estimate notwithstanding the action of significant coalescence and the presence of a mean shear. △ Less

Submitted 6 August, 2019; v1 submitted 14 February, 2019; originally announced February 2019.

Journal ref: J. Fluid Mech. 876 (2019) 962-984

Modeling of pressure drop and heat transfer for flow boiling in a mini/micro-channel of rectangular cross-section

Authors: Shashwat Jain, Prasanna Jayaramu, Sateesh Gedupudi

Abstract: In the present study, a 1-dimensional model is proposed to estimate the pressure drop and heat transfer coefficient for flow boiling in a rectangular microchannel. The present work takes into account the pressure fluctuations caused due to the confined bubble growth and the effect of pressure fluctuations on the heat transfer characteristics. The heat transfer model considers five zones, namely, l… ▽ More In the present study, a 1-dimensional model is proposed to estimate the pressure drop and heat transfer coefficient for flow boiling in a rectangular microchannel. The present work takes into account the pressure fluctuations caused due to the confined bubble growth and the effect of pressure fluctuations on the heat transfer characteristics. The heat transfer model considers five zones, namely, liquid slug, partially confined bubble, fully confined (elongated) bubble, partial dryout and full dry-out. The model incorporates the thinning of liquid film due to shear stress at liquid-vapour interface in addition to evaporation. The transient fluctuations in pressure and heat transfer coefficient, along with the time-averaged ones, are verified with the experimental data available in the literature. Heat transfer characteristics with flow reversal caused by inlet compressibility are also presented. △ Less

Submitted 1 February, 2019; originally announced February 2019.

Comments: 46 pages, 21 figures

Scalable arrays of micro-Penning traps for quantum computing and simulation

Authors: Shreyans Jain, Joseba Alonso, Matt Grau, Jonathan P. Home

Abstract: We propose the use of 2-dimensional Penning trap arrays as a scalable platform for quantum simulation and quantum computing with trapped atomic ions. This approach involves placing arrays of micro-structured electrodes defining static electric quadrupole sites in a magnetic field, with single ions trapped at each site and coupled to neighbors via the Coulomb interaction. We solve for the normal mo… ▽ More We propose the use of 2-dimensional Penning trap arrays as a scalable platform for quantum simulation and quantum computing with trapped atomic ions. This approach involves placing arrays of micro-structured electrodes defining static electric quadrupole sites in a magnetic field, with single ions trapped at each site and coupled to neighbors via the Coulomb interaction. We solve for the normal modes of ion motion in such arrays, and derive a generalized multi-ion invariance theorem for stable motion even in the presence of trap imperfections. We use these techniques to investigate the feasibility of quantum simulation and quantum computation in fixed ion lattices. In homogeneous arrays, we show that sufficiently dense arrays are achievable, with axial, magnetron and cyclotron motions exhibiting inter-ion dipolar coupling with rates significantly higher than expected decoherence. With the addition of laser fields these can realize tunable-range interacting spin Hamiltonians. We also show how local control of potentials allows isolation of small numbers of ions in a fixed array and can be used to implement high fidelity gates. The use of static trap** fields means that our approach is not limited by power requirements as system size increases, removing a major challenge for scaling which is present in standard radio-frequency traps. Thus the architecture and methods provided here appear to open a path for trapped-ion quantum computing to reach fault-tolerant scale devices. △ Less

Submitted 2 April, 2020; v1 submitted 17 December, 2018; originally announced December 2018.

Comments: 21 pages, 10 figures Changes include adding section IX (Implementation Example) and substantially rewriting section X (Scaling)

Journal ref: Phys. Rev. X 10, 031027 (2020)

Equation of state of fluid methane from first principles with machine learning potentials

Authors: Max Veit, Sandeep Kumar Jain, Satyanarayana Bonakala, Indranil Rudra, Detlef Hohl, Gábor Csányi

Abstract: The predictive simulation of molecular liquids requires models that are not only accurate, but computationally efficient enough to handle the large systems and long time scales required for reliable prediction of macroscopic properties. We present a new approach to the systematic approximation of the first-principles potential energy surface (PES) of molecular liquids using the GAP (Gaussian Appro… ▽ More The predictive simulation of molecular liquids requires models that are not only accurate, but computationally efficient enough to handle the large systems and long time scales required for reliable prediction of macroscopic properties. We present a new approach to the systematic approximation of the first-principles potential energy surface (PES) of molecular liquids using the GAP (Gaussian Approximation Potential) framework. The approach allows us to create potentials at several different levels of accuracy in reproducing the true PES, which allows us to test the level of quantum chemistry that is necessary to accurately predict its macroscopic properties. We test the approach by building potentials for liquid methane (CH$_4$), which is difficult to model from first principles because its behavior is dominated by weak dispersion interactions with a significant many-body component. We find that an accurate, consistent prediction of its bulk density across a wide range of temperature and pressure requires not only many-body dispersion, but also quantum nuclear effects to be modeled accurately. △ Less

Submitted 24 October, 2018; originally announced October 2018.