Showing 1–2 of 2 results for author: Jacques, P
-
Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds
Authors:
Norberto Jimenez Mena,
Thaneshan Sapanathan,
Pascal J. Jacques,
Aude Simar
Abstract:
The single lap shear test is widely used to measure the strength of dissimilar welds even though such a test brings limited understanding of the intrinsic weld toughness. The present study proposes a numerical finite element (FE) analysis and experimental characterization of dissimilar joints presenting various microstructures (thickness of the intermetallic layer (IML) and hardness profile). For…
▽ More
The single lap shear test is widely used to measure the strength of dissimilar welds even though such a test brings limited understanding of the intrinsic weld toughness. The present study proposes a numerical finite element (FE) analysis and experimental characterization of dissimilar joints presenting various microstructures (thickness of the intermetallic layer (IML) and hardness profile). For this purpose, Friction Melt Bonding (FMB) and Friction Stir Welding (FSW) were used to join aluminum AA6061 and Dual Phase steel (DP980). The FE simulations allowed calculating the evolution of the J-integral near this notch tip. It shows that crack initiation depends significantly on the plastic properties of the welded metallic alloys around the notch tip and the width of the welded zone, which both are significantly different for FSW and FMB processes. Nevertheless, a similar weld fracture toughness J_C of approximately 1 kJ.m-2 is estimated from the analysis for both FMB and FSW. This is three orders of magnitude higher than the fracture toughness of the intermetallic layer, revealing that the plastic dissipation in the Al and steel plates around the crack tip has a major effect on the weld toughness.
△ Less
Submitted 27 April, 2021;
originally announced April 2021.
-
Grid Based Monitoring on the Rutgers CDF Analysis Farm
Authors:
P. Jacques,
F. Ratnikov,
I. Terekhov,
T. Watts
Abstract:
Run II at the Fermilab Tevatron Collider started in March 2001, and it will continue probing the high energy frontier in particle physics until the start of the LHC at CERN. The CDF collaboration at Fermilab has already stored 260 TB of data and expects to store 1PB of data in the next two years. The HEXCAF computing farm is being set up at Rutgers University to provide the software environment,…
▽ More
Run II at the Fermilab Tevatron Collider started in March 2001, and it will continue probing the high energy frontier in particle physics until the start of the LHC at CERN. The CDF collaboration at Fermilab has already stored 260 TB of data and expects to store 1PB of data in the next two years. The HEXCAF computing farm is being set up at Rutgers University to provide the software environment, computing resources, and access to data for physicists participating in the Collaboration. Some job submission, detector data access and storage of the output results are based on the SAM-GRID tools. To extend monitoring for these jobs running on the farm a bridge was developed between the SAM-GRID monitoring tools and the internal farm monitoring. This presentation will describe the configuration and functionality of the HEXCAF farm with the emphasis on the monitoring tools. Finally we summarize our experience of installing and operating a GRID environment on a remote cluster that is being used for real physics studies in the big running experiment.
△ Less
Submitted 15 June, 2003;
originally announced June 2003.
