-
Diode pumped silicate fiber for visible laser emission
Authors:
Matthew R. Majewski,
Stuart D. Jackson
Abstract:
We demonstrate yellow laser emission using silicate glass fiber as the gain medium. By employing core pum** using widely available GaN diode lasers with emission at 445 nm, we show that Dy3+-doped aluminosilicate glass fiber can be readily excited creating sufficient gain at 581 nm. In this proof of concept demonstration, the maximum output power generated was 3 mW with a slope efficiency approx…
▽ More
We demonstrate yellow laser emission using silicate glass fiber as the gain medium. By employing core pum** using widely available GaN diode lasers with emission at 445 nm, we show that Dy3+-doped aluminosilicate glass fiber can be readily excited creating sufficient gain at 581 nm. In this proof of concept demonstration, the maximum output power generated was 3 mW with a slope efficiency approximately 1.8% with respect to injected pump.
△ Less
Submitted 13 October, 2021;
originally announced October 2021.
-
Ultrafast 3.5 μm fiber laser
Authors:
Nathaniel Bawden,
Ori Henderson-Sapir,
Stuart D. Jackson,
David J. Ottaway
Abstract:
We report the first mode-locked fiber laser to operate in the femtosecond regime well beyond 3 μm. The laser uses dual-wavelength pum** and non-linear polarisation rotation to produce 3.5 μm wavelength pulses with minimum duration of 580 fs at a repetition rate of 68 MHz. The pulse energy is 3.2 nJ, corresponding to a peak power of 5.5 kW.
We report the first mode-locked fiber laser to operate in the femtosecond regime well beyond 3 μm. The laser uses dual-wavelength pum** and non-linear polarisation rotation to produce 3.5 μm wavelength pulses with minimum duration of 580 fs at a repetition rate of 68 MHz. The pulse energy is 3.2 nJ, corresponding to a peak power of 5.5 kW.
△ Less
Submitted 10 January, 2021;
originally announced January 2021.
-
Dysprosium mid-infrared lasers: current status and future prospects
Authors:
R. I. Woodward,
M. R. Majewski,
S. D. Jackson
Abstract:
With growing interest in the mid-infrared spectral region, dysprosium has recently been revisited for efficient high-performance infrared source development. Despite historically receiving less attention than other rare earth ions, in recent years lasers utilizing the dysprosium ion as the laser material have set record mid-infrared performance, including tunability from 2.8 to 3.4 um (in addition…
▽ More
With growing interest in the mid-infrared spectral region, dysprosium has recently been revisited for efficient high-performance infrared source development. Despite historically receiving less attention than other rare earth ions, in recent years lasers utilizing the dysprosium ion as the laser material have set record mid-infrared performance, including tunability from 2.8 to 3.4 um (in addition to 4.3 um lasing), continuous wave powers exceeding 10 W, greater than 73% slope efficiencies, and even ultrafast pulsed operation. Herein, the unique energy level structure and spectroscopy of the dysprosium ion are examined and the major developments that have led to this resurgence of interest and subsequent record mid-infrared laser performance are surveyed. Also mid-infrared applications of emerging dysprosium lasers are highlighted, in addition to surveying the many opportunities that lie ahead.
△ Less
Submitted 12 March, 2020;
originally announced March 2020.
-
Ultrafast mid-infrared fiber laser mode-locked using frequency-shifted feedback
Authors:
M. R. Majewski,
R. I. Woodward,
S. D. Jackson
Abstract:
We demonstrate ultrashort pulse generation from a fluoride fiber laser co-doped with holmium and praseodymium. To date the majority of work focused on short pulse generation from this class of fiber laser has employed loss modulators in the cavity, both real and artificial. In this work we alternatively employ a frequency shifting element: an acousto-optic modulator (AOM) in the cavity. This resul…
▽ More
We demonstrate ultrashort pulse generation from a fluoride fiber laser co-doped with holmium and praseodymium. To date the majority of work focused on short pulse generation from this class of fiber laser has employed loss modulators in the cavity, both real and artificial. In this work we alternatively employ a frequency shifting element: an acousto-optic modulator (AOM) in the cavity. This results in mode-locked output of sub-5 ps pulses with 10 nJ of energy at a center wavelength of 2.86 μm, and a pulse repetition frequency of 30.1 MHz, equating to a peak power of 1.9 kW. Additional experimental investigation of the relationship between frequency shift and cavity round trip offer insight into the complex underlying dynamics. As a complementary mode-locking technique to conventional loss modulation, this method of pulse formation may greatly expand the design flexibility of pulsed mid-infrared fiber lasers.
△ Less
Submitted 29 March, 2019;
originally announced March 2019.
-
Q-switched Dy:ZBLAN fiber lasers beyond 3 μm: comparison of pulse generation using acousto-optic modulation and inkjet-printed black phosphorus
Authors:
R. I. Woodward,
M. R. Majewski,
N. Macadam,
G. Hu,
T. Albrow-Owen,
T. Hasan,
S. D. Jackson
Abstract:
We report high-energy mid-infrared pulse generation by Q-switching of dysprosium-doped fiber lasers for the first time. Two different modulation techniques are demonstrated. Firstly, using active acousto-optic modulation, pulses are produced with up to 12 μJ energy and durations as short as 270 ns, with variable repetition rates from 100 Hz to 20 kHz and central wavelengths tunable from 2.97 to 3.…
▽ More
We report high-energy mid-infrared pulse generation by Q-switching of dysprosium-doped fiber lasers for the first time. Two different modulation techniques are demonstrated. Firstly, using active acousto-optic modulation, pulses are produced with up to 12 μJ energy and durations as short as 270 ns, with variable repetition rates from 100 Hz to 20 kHz and central wavelengths tunable from 2.97 to 3.23 μm. Experiments are supported by numerical modeling, identifying routes for improved pulse energies and to avoid multi-pulsing by careful choice of modulator parameters. Secondly, we demonstrate passive Q-switching by fabricating an inkjet-printed black phosphorus saturable absorber, simplifying the cavity and generating 1.0 μJ pulses with 740 ns duration. The performance and relative merits of each modulation approach are then critically discussed. These demonstrations highlight the potential of dysprosium as a versatile gain medium for high-performance pulsed sources beyond 3 μm.
△ Less
Submitted 11 May, 2019; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Swept-wavelength mid-infrared fiber laser for real-time ammonia gas sensing
Authors:
R. I. Woodward,
M. R. Majewski,
D. D. Hudson,
S. D. Jackson
Abstract:
The mid-infrared (mid-IR) spectral region holds great promise for new laser-based sensing technologies, based on measuring strong mid-IR molecular absorption features. Practical applications have been limited to date, however, by current low-brightness broadband mid-IR light sources and slow acquisition-time detection systems. Here, we report a new approach by develo** a swept-wavelength mid-inf…
▽ More
The mid-infrared (mid-IR) spectral region holds great promise for new laser-based sensing technologies, based on measuring strong mid-IR molecular absorption features. Practical applications have been limited to date, however, by current low-brightness broadband mid-IR light sources and slow acquisition-time detection systems. Here, we report a new approach by develo** a swept-wavelength mid-infrared fiber laser, exploiting the broad emission of dysprosium and using an acousto-optic tunable filter to achieve electronically controlled swept-wavelength operation from 2.89 to 3.25 μm (3070-3460 cm^-1). Ammonia (NH3) absorption spectroscopy is demonstrated using this swept source with a simple room-temperature single-pixel detector, with 0.3 nm resolution and 40 ms acquisition time. This creates new opportunities for real-time high-sensitivity remote sensing using simple, compact mid-IR fiber-based technologies.
△ Less
Submitted 28 January, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Mode-locked dysprosium fiber laser: picosecond pulse generation from 2.97 to 3.30 μm
Authors:
R. I. Woodward,
M. R. Majewski,
S. D. Jackson
Abstract:
Mode-locked fiber laser technology to date has been limited to sub-3 μm wavelengths, despite significant application-driven demand for compact picosecond and femtosecond pulse sources at longer wavelengths. Erbium- and holmium-doped fluoride fiber lasers incorporating a saturable absorber are emerging as promising pulse sources for 2.7--2.9 μm, yet it remains a major challenge to extend this cover…
▽ More
Mode-locked fiber laser technology to date has been limited to sub-3 μm wavelengths, despite significant application-driven demand for compact picosecond and femtosecond pulse sources at longer wavelengths. Erbium- and holmium-doped fluoride fiber lasers incorporating a saturable absorber are emerging as promising pulse sources for 2.7--2.9 μm, yet it remains a major challenge to extend this coverage. Here, we propose a new approach using dysprosium-doped fiber with frequency shifted feedback (FSF). Using a simple linear cavity with an acousto-optic tunable filter, we generate 33 ps pulses with up to 2.7 nJ energy and 330 nm tunability from 2.97 to 3.30 μm (3000--3400 cm^-1)---the first mode-locked fiber laser to cover this spectral region and the most broadly tunable pulsed fiber laser to date. Numerical simulations show excellent agreement with experiments and also offer new insights into the underlying dynamics of FSF pulse generation. This highlights the remarkable potential of both dysprosium as a gain material and FSF for versatile pulse generation, opening new opportunities for mid-IR laser development and practical applications outside the laboratory.
△ Less
Submitted 25 October, 2018;
originally announced October 2018.
-
Emission beyond 4 μm and mid-infrared lasing in a dysprosium-doped indium fluoride (InF3) fiber
Authors:
M. R. Majewski,
R. I. Woodward,
J. -Y. Carreé,
S. Poulain,
M. Poulain,
S. D. Jackson
Abstract:
Optical emission from rare-earth-doped fluoride fibers has thus far been limited to less than 4 μm. We extend emission beyond this limit by employing an indium fluoride (InF3) glass fiber as the host, which exhibits an increased infrared transparency over commonly used zirconium fluoride (ZBLAN). Near-infrared pum** of a dysprosium-doped InF3 fiber results in broad emission centered around 4.3 μ…
▽ More
Optical emission from rare-earth-doped fluoride fibers has thus far been limited to less than 4 μm. We extend emission beyond this limit by employing an indium fluoride (InF3) glass fiber as the host, which exhibits an increased infrared transparency over commonly used zirconium fluoride (ZBLAN). Near-infrared pum** of a dysprosium-doped InF3 fiber results in broad emission centered around 4.3 μm, representing the longest emission yet achieved from a fluoride fiber. The first laser emission in an InF3 fiber is also demonstrated from the 3 μm dysprosium transition. Finally, a frequency domain excited state lifetime measurement comparison between fluoride hosts suggests that multiphonon effects are significantly reduced in indium fluoride fiber, paving the way to more efficient, longer wavelength lasers compared to ZBLAN fibers
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
Watt-level dysprosium fiber laser at 3.15 μm with 73% slope efficiency
Authors:
R. I. Woodward,
M. R. Majewski,
G. Bharathan,
D. D. Hudson,
A. Fuerbach,
S. D. Jackson
Abstract:
Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6-3.0 μm and 3.3-3.8 μm regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly underserved, despite prospects for important manufacturing and defense applications. Here, we demonstrate the potential of dysprosium-doped fiber to solve this problem, with a s…
▽ More
Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6-3.0 μm and 3.3-3.8 μm regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly underserved, despite prospects for important manufacturing and defense applications. Here, we demonstrate the potential of dysprosium-doped fiber to solve this problem, with a simple in-band pumped grating-stabilized linear cavity generating up to 1.06 W at 3.15 μm. A slope efficiency of 73% with respect to launched power (77% relative to absorbed power) is achieved: the highest value for any mid-infrared fiber laser to date, to the best of our knowledge. Opportunities for further power and efficiency scaling are also discussed.
△ Less
Submitted 25 March, 2018;
originally announced March 2018.
-
Dysprosium-doped ZBLAN fiber laser tunable from 2.8 μm to 3.4 μm, pumped at 1.7 μm
Authors:
M. R. Majewski,
R. I. Woodward,
S. D. Jackson
Abstract:
We demonstrate a mid-infrared dysprosium-doped fluoride fiber laser with a continuously tunable output range of 573 nm, pumped by a 1.7 μm Raman fiber laser. To the best of our knowledge, this represents the largest tuning range achieved to date from any rare-earth-doped fiber laser and, critically, spans the 2.8-3.4 μm spectral region, which contains absorption resonances of many important functi…
▽ More
We demonstrate a mid-infrared dysprosium-doped fluoride fiber laser with a continuously tunable output range of 573 nm, pumped by a 1.7 μm Raman fiber laser. To the best of our knowledge, this represents the largest tuning range achieved to date from any rare-earth-doped fiber laser and, critically, spans the 2.8-3.4 μm spectral region, which contains absorption resonances of many important functional groups and is uncovered by other rare-earth ions. Output powers up to 170 mW are achieved, with 21% slope efficiency. We also discuss the relative merits of the 1.7 μm pump scheme, including possible pump excited-state absorption.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Generation of 70-fs pulses at 2.86 μm from a mid-infrared fiber laser
Authors:
R. I. Woodward,
D. D. Hudson,
A. Fuerbach,
S. D. Jackson
Abstract:
We propose and demonstrate a simple route to few-optical-cycle pulse generation from a mid-infrared fiber laser through nonlinear compression of pulses from a holmium-doped fiber oscillator using a short length of chalcogenide fiber and a grating pair. Pulses from the oscillator with 265-fs duration at 2.86 μm are spectrally broadened through self-phase modulation in step-index As2S3 fiber to 141-…
▽ More
We propose and demonstrate a simple route to few-optical-cycle pulse generation from a mid-infrared fiber laser through nonlinear compression of pulses from a holmium-doped fiber oscillator using a short length of chalcogenide fiber and a grating pair. Pulses from the oscillator with 265-fs duration at 2.86 μm are spectrally broadened through self-phase modulation in step-index As2S3 fiber to 141-nm bandwidth and then re-compressed to 70 fs (7.3 optical cycles). These are the shortest pulses from a mid-infrared fiber system to date, and we note that our system is compact, robust, and uses only commercially available components. The scalability of this approach is also discussed, supported by numerical modeling.
△ Less
Submitted 26 November, 2017;
originally announced November 2017.
-
High quality waveguides for the mid-infrared wavelength range in a silicon-on-sapphire platform
Authors:
Fangxin Li,
Stuart D. Jackson,
Christian Grillet,
Eric Magi,
Darren Hudson,
Steven J. Madden,
Yashodhan Moghe,
Christopher OBrien,
Andrew Read,
Steven G. Duvall,
Peter Atanackovic,
Benjamin J. Eggleton,
David J. Moss
Abstract:
We report record low loss silicon-on-sapphire nanowires for applications to mid infrared optics. We achieve propagation losses as low as 0.8dB/cm at 1550nm, 1.1 to 1.4dB/cm at 2080nm and < 2dB/cm at = 5.18 microns.
We report record low loss silicon-on-sapphire nanowires for applications to mid infrared optics. We achieve propagation losses as low as 0.8dB/cm at 1550nm, 1.1 to 1.4dB/cm at 2080nm and < 2dB/cm at = 5.18 microns.
△ Less
Submitted 29 May, 2017;
originally announced May 2017.
-
Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser
Authors:
Ori Henderson-Sapir,
Stuart. D. Jackson,
David. J. Ottaway
Abstract:
We report on a long wavelength emitting rare earth doped fiber laser with emission centered at 3.5 μm and tunable across 450 nm. The longest wavelength emission was 3.78 μm, which is the longest emission from a fiber laser operating at room temperature. In a simple optical arrangement employing dielectric mirrors for feedback, the laser was capable of emitting 1.45 W of near diffraction limited ou…
▽ More
We report on a long wavelength emitting rare earth doped fiber laser with emission centered at 3.5 μm and tunable across 450 nm. The longest wavelength emission was 3.78 μm, which is the longest emission from a fiber laser operating at room temperature. In a simple optical arrangement employing dielectric mirrors for feedback, the laser was capable of emitting 1.45 W of near diffraction limited output power at 3.47 μm. These emission characteristics compliment the emission from quantum cascade lasers and demonstrate how all infrared dual wavelength pum** can be used to access high lying rare earth ion transitions that have previously relied on visible wavelength pum**.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Hydex Glass: a New CMOS Compatible Platform for All-Optical Photonic Chips
Authors:
David J. Moss,
S. D. Jackson,
A. Pasquazi,
M. Peccianti,
R. Morandotti
Abstract:
We demonstrate a range of novel functions based on a high index doped silica glass CMOS compatible platform. This platform has promise for telecommunications and on-chip WDM optical interconnects for computing.
We demonstrate a range of novel functions based on a high index doped silica glass CMOS compatible platform. This platform has promise for telecommunications and on-chip WDM optical interconnects for computing.
△ Less
Submitted 21 April, 2014;
originally announced April 2014.
