Showing 1–46 of 46 results for author: Ishida, T

Contrasting Irradiation Behavior of Dual Phases in Ti-6Al-4V Alloy at Low-Temperature Due to Omega-phase Precursors in Beta-phase Matrix

Authors: Taku Ishida, Sho Kano, Eiichi Wakai, Tamaki Shibayama, Shunsuke Makimura, Hiroaki Abe

Abstract: Aiming to simulate the radiation damage effect on a dual alpha+beta phase Ti-6Al-4V alloy utilized as high-intensity accelerator beam window material, a series of irradiation experiments were conducted with a 2.8 MeV-Fe^2+ ion beam in several dpa regions at room temperature. The nano-indentation hardness increased steeply at 1 dpa and unchanged up to 10 dpa, due to the saturation of defect cluster… ▽ More Aiming to simulate the radiation damage effect on a dual alpha+beta phase Ti-6Al-4V alloy utilized as high-intensity accelerator beam window material, a series of irradiation experiments were conducted with a 2.8 MeV-Fe^2+ ion beam in several dpa regions at room temperature. The nano-indentation hardness increased steeply at 1 dpa and unchanged up to 10 dpa, due to the saturation of defect clusters and tangled dislocations in the dominant alpha-phase matrix with a size of 2~3 nm and a density of about 1x10^23 m^-3. In contrast in the intergranular beta-phase, larger loops of 20~30 nm diameter were observed with much less density of about 5x10^20 m^-3. The diffraction pattern showed rectilinear diffuse streaks between the beta-phase reflections, corresponding to the omega-phase precursor, without dose dependency in its intensity. FFT/I-FFT analysis of the HREM revealed a sub-nanometer-sized lattice disorder with local fluctuations, not discrete but continuous, and homogeneously distributed within the matrix beta-phase stably against the irradiation. The significantly low dislocation density and the absence of phase transformation in the beta-phase matrix could be attributed either to the strong sink effect expected for this distinctive sub-nanometer-sized homogeneous lattice disorder or to the anomalous point defect recombination induced by the high mobility of vacancies, both of which are originated from the metastable omega-phase precursors specifically formed in the beta(BCC) phase of group-4 transition metals. △ Less

Submitted 1 May, 2024; originally announced May 2024.

Comments: 36 pages, 15 figures

Combined Pre-Supernova Alert System with Kamland and Super-Kamiokande

Authors: KamLAND, Super-Kamiokande Collaborations, :, Seisho Abe, Minori Eizuka, Sawako Futagi, Azusa Gando, Yoshihito Gando, Shun Goto, Takahiko Hachiya, Kazumi Hata, Koichi Ichimura, Sei Ieki, Haruo Ikeda, Kunio Inoue, Koji Ishidoshiro, Yuto Kamei, Nanami Kawada, Yasuhiro Kishimoto, Masayuki Koga, Maho Kurasawa, Tadao Mitsui, Haruhiko Miyake, Daisuke Morita, Takeshi Nakahata , et al. (290 additional authors not shown)

Abstract: Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are ob… ▽ More Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are observed, an early warning of the upcoming core-collapse supernova can be provided. In light of this, KamLAND and Super-Kamiokande, both located in the Kamioka mine in Japan, have been monitoring pre-supernova neutrinos since 2015 and 2021, respectively. Recently, we performed a joint study between KamLAND and Super-Kamiokande on pre-supernova neutrino detection. A pre-supernova alert system combining the KamLAND detector and the Super-Kamiokande detector was developed and put into operation, which can provide a supernova alert to the astrophysics community. Fully leveraging the complementary properties of these two detectors, the combined alert is expected to resolve a pre-supernova neutrino signal from a 15 M$_{\odot}$ star within 510 pc of the Earth, at a significance level corresponding to a false alarm rate of no more than 1 per century. For a Betelgeuse-like model with optimistic parameters, it can provide early warnings up to 12 hours in advance. △ Less

Submitted 1 July, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: Resubmitted to ApJ. 22 pages, 16 figures, for more information about the combined pre-supernova alert system, see https://www.lowbg.org/presnalarm/

Second gadolinium loading to Super-Kamiokande

Authors: K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Sato, H. Sekiya, H. Shiba, K. Shimizu, M. Shiozawa , et al. (225 additional authors not shown)

Abstract: The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was do… ▽ More The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was doubled compared to the first loading, the capacity of the powder dissolving system was doubled. We also developed new batches of gadolinium sulfate with even further reduced radioactive impurities. In addition, a more efficient screening method was devised and implemented to evaluate these new batches of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$. Following the second loading, the Gd concentration in SK was measured to be $333.5\pm2.5$ ppm via an Atomic Absorption Spectrometer (AAS). From the mean neutron capture time constant of neutrons from an Am/Be calibration source, the Gd concentration was independently measured to be 332.7 $\pm$ 6.8(sys.) $\pm$ 1.1(stat.) ppm, consistent with the AAS result. Furthermore, during the loading the Gd concentration was monitored continually using the capture time constant of each spallation neutron produced by cosmic-ray muons,and the final neutron capture efficiency was shown to become 1.5 times higher than that of the first loaded phase, as expected. △ Less

Submitted 18 June, 2024; v1 submitted 12 March, 2024; originally announced March 2024.

Comments: 34 pages, 13 figures, submitted to Nuclear Inst. and Methods in Physics Research, A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1065 (2024) 169480

Rotationally displaced electric field intensity distribution around square nanoantennas induced by circularly polarized light

Authors: Naoki Ichiji, Takuya Ishida, Ikki Morichika, Tetsu Tatsuma, Satoshi Ashihara

Abstract: An optical field around regular polygon metal nanostructures excited by circularly polarized light can exhibit rotationally displaced intensity distributions. Although this phenomenon has been recognized, its underlying mechanisms has not been sufficiently explained. Herein, finite-difference time-domain simulations and model analyses reveal that the rotationally displaced optical intensity distri… ▽ More An optical field around regular polygon metal nanostructures excited by circularly polarized light can exhibit rotationally displaced intensity distributions. Although this phenomenon has been recognized, its underlying mechanisms has not been sufficiently explained. Herein, finite-difference time-domain simulations and model analyses reveal that the rotationally displaced optical intensity distribution can be generated when each of the linear polarization components that constitute circular polarization excites a superposition of multiple modes. The proposed model reasonably explains the rotationally displaced patterns for a square nanoantenna and other regular-polygon nanoantennas. △ Less

Submitted 25 November, 2023; originally announced November 2023.

Comments: 5pages, 5 figures

Journal ref: Physical Review B 2024, 109, 035428

Orientation map** of YbSn$_3$ single crystals based on Bragg-dip analysis using a delay-line superconducting sensor

Authors: Hiroaki Shishido, The Dang Vu, Kazuya Aizawa, Kenji M. Kojima, Tomio Koyama, Kenichi Oikawa, Masahide Harada, Takayuki Oku, Kazuhiko Soyama, Shigeyuki Miyajima, Mutsuo Hidaka, Soh Y. Suzuki, Manobu M. Tanaka, Shuichi Kawamata, Takekazu Ishida

Abstract: Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. The delay-line current-biased kinetic-inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal reso… ▽ More Recent progress in high-power pulsed neutron sources has stimulated the development of the Bragg-dip and Bragg-edge analysis methods using a two-dimensional neutron detector with high temporal resolution to resolve the neutron energy by the time-of-flight method. The delay-line current-biased kinetic-inductance detector (CB-KID) is a two-dimensional superconducting sensor with a high temporal resolution and multi-hit capability. We demonstrate that the delay-line CB-KID with a $^{10}$B neutron conversion layer can be applied to high-spatial-resolution neutron transmission imaging and spectroscopy up to 100\,eV. Dip structures in the transmission spectrum induced by Bragg diffraction and nuclear resonance absorption in YbSn$_3$ single crystals. We successfully drew the orientation map** of YbSn$_3$ crystals based on the analysis of observed Bragg-dip positions in the transmission spectrum. △ Less

Submitted 9 August, 2023; originally announced August 2023.

Comments: 18 pages, 6 figures

Journal ref: Journal of Applied Crystallography 56, 1108-1113 (2023)

Search for astrophysical electron antineutrinos in Super-Kamiokande with 0.01wt% gadolinium-loaded water

Authors: M. Harada, K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba , et al. (216 additional authors not shown)

Abstract: We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay w… ▽ More We report the first search result for the flux of astrophysical electron antineutrinos for energies O(10) MeV in the gadolinium-loaded Super-Kamiokande (SK) detector. In June 2020, gadolinium was introduced to the ultra-pure water of the SK detector in order to detect neutrons more efficiently. In this new experimental phase, SK-Gd, we can search for electron antineutrinos via inverse beta decay with efficient background rejection and higher signal efficiency thanks to the high efficiency of the neutron tagging technique. In this paper, we report the result for the initial stage of SK-Gd with a $22.5\times552$ $\rm kton\cdot day$ exposure at 0.01% Gd mass concentration. No significant excess over the expected background in the observed events is found for the neutrino energies below 31.3 MeV. Thus, the flux upper limits are placed at the 90% confidence level. The limits and sensitivities are already comparable with the previous SK result with pure-water ($22.5 \times 2970 \rm kton\cdot day$) owing to the enhanced neutron tagging. △ Less

Submitted 30 May, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Extension of Moving Particle Simulation including rotational degrees of freedom for dilute fiber suspension

Authors: Keigo Enomoto, Takato Ishida, Yuya Doi, Takashi Uneyama, Yuichi Masubuchi

Abstract: We develop a novel Moving Particle Simulation (MPS) method to accurately reproduce the motion of fibers floating in sheared liquids. In conventional MPS schemes, if a fiber suspended in a liquid is represented by a one-dimensional array of MPS particles, it is entirely aligned to the flow direction due to the lack of shear stress difference between fiber-liquid interfaces. To address this problem,… ▽ More We develop a novel Moving Particle Simulation (MPS) method to accurately reproduce the motion of fibers floating in sheared liquids. In conventional MPS schemes, if a fiber suspended in a liquid is represented by a one-dimensional array of MPS particles, it is entirely aligned to the flow direction due to the lack of shear stress difference between fiber-liquid interfaces. To address this problem, we employ the micropolar fluid model to introduce rotational degrees of freedom into the MPS particles. The translational motion of liquid and solid particles and the rotation of solid particles are calculated with the explicit MPS algorithm. The fiber is modeled as an array of micropolar fluid particles bonded with stretching and bending potentials. The motion of a single rigid fiber is simulated in a three-dimensional shear flow generated between two moving solid walls. We show that the proposed method is capable of reproducing the fiber motion predicted by Jeffery's theory being different from the conventional MPS simulations. △ Less

Submitted 10 January, 2023; originally announced January 2023.

Comments: 10 pages, 8 Postscript figures

Searching for neutrinos from solar flares across solar cycles 23 and 24 with the Super-Kamiokande detector

Authors: K. Okamoto, K. Abe, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, Y. Kaneshima, Y. Kataoka, Y. Kashiwagi, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, Y. Nakano, S. Nakayama, Y. Noguchi, K. Sato, H. Sekiya, K. Shimizu, M. Shiozawa , et al. (220 additional authors not shown)

Abstract: Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we… ▽ More Neutrinos associated with solar flares (solar-flare neutrinos) provide information on particle acceleration mechanisms during the impulsive phase of solar flares. We searched using the Super-Kamiokande detector for neutrinos from solar flares that occurred during solar cycles $23$ and $24$, including the largest solar flare (X28.0) on November 4th, 2003. In order to minimize the background rate we searched for neutrino interactions within narrow time windows coincident with $γ$-rays and soft X-rays recorded by satellites. In addition, we performed the first attempt to search for solar-flare neutrinos from solar flares on the invisible side of the Sun by using the emission time of coronal mass ejections (CMEs). By selecting twenty powerful solar flares above X5.0 on the visible side and eight CMEs whose emission speed exceeds $2000$ $\mathrm{km \, s^{-1}}$ on the invisible side from 1996 to 2018, we found two (six) neutrino events coincident with solar flares occurring on the visible (invisible) side of the Sun, with a typical background rate of $0.10$ ($0.62$) events per flare in the MeV-GeV energy range. No significant solar-flare neutrino signal above the estimated background rate was observed. As a result we set the following upper limit on neutrino fluence at the Earth $\mathitΦ<1.1\times10^{6}$ $\mathrm{cm^{-2}}$ at the $90\%$ confidence level for the largest solar flare. The resulting fluence limits allow us to constrain some of the theoretical models for solar-flare neutrino emission. △ Less

Submitted 26 October, 2022; v1 submitted 24 October, 2022; originally announced October 2022.

Comments: 36 pages, 18 figures, 9 tables (Figure 12 was replaced because it was incorrect in version 1.)

Single Event Tolerance of X-ray SOI Pixel Sensors

Authors: Kouichi Hagino, Mitsuki Hayashida, Takayoshi Kohmura, Toshiki Doi, Shun Tsunomachi, Masatoshi Kitajima, Takeshi G. Tsuru, Hiroyuki Uchida, Kazuho Kayama, Koji Mori, Ayaki Takeda, Yusuke Nishioka, Masataka Yukumoto, Kira Mieda, Syuto Yonemura, Tatsunori Ishida, Takaaki Tanaka, Yasuo Arai, Ikuo Kurachi, Hisashi Kitamura, Shoji Kawahito, Keita Yasutomi

Abstract: We evaluate the single event tolerance of the X-ray silicon-on-insulator (SOI) pixel sensor named XRPIX, developed for the future X-ray astronomical satellite FORCE. In this work, we measure the cross-section of single event upset (SEU) of the shift register on XRPIX by irradiating heavy ion beams with linear energy transfer (LET) ranging from 0.022 MeV/(mg/cm2) to 68 MeV/(mg/cm2). From the SEU cr… ▽ More We evaluate the single event tolerance of the X-ray silicon-on-insulator (SOI) pixel sensor named XRPIX, developed for the future X-ray astronomical satellite FORCE. In this work, we measure the cross-section of single event upset (SEU) of the shift register on XRPIX by irradiating heavy ion beams with linear energy transfer (LET) ranging from 0.022 MeV/(mg/cm2) to 68 MeV/(mg/cm2). From the SEU cross-section curve, the saturation cross-section and threshold LET are successfully obtained to be $3.4^{+2.9}_{-0.9}\times 10^{-10}~{\rm cm^2/bit}$ and $7.3^{+1.9}_{-3.5}~{\rm MeV/(mg/cm^2)}$, respectively. Using these values, the SEU rate in orbit is estimated to be $\lesssim$ 0.1 event/year primarily due to the secondary particles induced by cosmic-ray protons. This SEU rate of the shift register on XRPIX is negligible in the FORCE orbit. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 9 pages, 5 figures, accepted for publication in JATIS

Neutron Tagging following Atmospheric Neutrino Events in a Water Cherenkov Detector

Authors: K. Abe, Y. Haga, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, S. Imaizumi, K. Iyogi, J. Kameda, Y. Kanemura, Y. Kataoka, Y. Kato, Y. Kishimoto, S. Miki, S. Mine, M. Miura, T. Mochizuki, S. Moriyama, Y. Nagao, M. Nakahata, T. Nakajima, Y. Nakano, S. Nakayama, T. Okada, K. Okamoto , et al. (281 additional authors not shown)

Abstract: We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agr… ▽ More We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agrees with this value within 10%. The tagging procedure was performed on 3,244.4 days of SK-IV atmospheric neutrino data, identifying 18,091 neutrons in 26,473 neutrino events. The fitted neutron capture lifetime was measured as 218 \pm 9 μs. △ Less

Submitted 20 September, 2022; v1 submitted 18 September, 2022; originally announced September 2022.

Journal ref: JINST 17 P10029 (2022)

Scintillator ageing of the T2K near detectors from 2010 to 2021

Authors: The T2K Collaboration, K. Abe, N. Akhlaq, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, L. Berns, S. Bhadra, A. Blanchet, A. Blondel , et al. (333 additional authors not shown)

Abstract: The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation… ▽ More The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 29 pages, 18 figures. Prepared for submission to JINST

Thickness optimization of the output power and effective thermoelectric figure of merit of thin thermoelectric generator

Authors: Kazuhiko Seki, Masakazu Mukaida, Qingshuo Wei, Takao Ishida

Abstract: The conventional thermoelectric figure of merit and the power factor are not sufficient as a measure of thin film quality of thermoelectric materials, where the power conversion efficiency depends on the film dimensions. By considering the film size, the effective thermoelectric figure of merit and effective Seebeck coefficient are introduced to guarantee that the maximum energy conversion efficie… ▽ More The conventional thermoelectric figure of merit and the power factor are not sufficient as a measure of thin film quality of thermoelectric materials, where the power conversion efficiency depends on the film dimensions. By considering the film size, the effective thermoelectric figure of merit and effective Seebeck coefficient are introduced to guarantee that the maximum energy conversion efficiency increases as the effective thermoelectric figure of merit increases. Similarly, the effective power factor is defined. By introducing typical material properties for Bi$_2$Te$_3$ and PEDOT, we study the thickness dependence of the effective figure of merit and the effective power factor. △ Less

Submitted 27 June, 2022; originally announced June 2022.

Comments: 4 figures

Journal ref: Jpn. J. Appl. Phys. 61 080903 (2022)

X-ray Radiation Damage Effects on Double-SOI Pixel Detectors for the Future Astronomical Satellite "FORCE"

Authors: Masatoshi Kitajima, Kouichi Hagino, Takayoshi Kohmura, Mitsuki Hayashida, Kenji Oono, Kousuke Negishi, Keigo Yarita, Toshiki Doi, Shun Tsunomachi, Takeshi G. Tsuru, Hiroyuki Uchida, Kazuho Kayama, Ryota Kodama, Takaaki Tanaka, Koji Mori, Ayaki Takeda, Yusuke Nishioka, Masataka Yukumoto, Kira Mieda, Syuto Yonemura, Tatsunori Ishida, Yasuo Arai, Ikuo Kurachi

Abstract: We have been develo** the monolithic active pixel detector "XRPIX" onboard the future X-ray astronomical satellite "FORCE". XRPIX is composed of CMOS pixel circuits, SiO2 insulator, and Si sensor by utilizing the silicon-on-insulator (SOI) technology. When the semiconductor detector is operated in orbit, it suffers from radiation damage due to X-rays emitted from the celestial objects as well as… ▽ More We have been develo** the monolithic active pixel detector "XRPIX" onboard the future X-ray astronomical satellite "FORCE". XRPIX is composed of CMOS pixel circuits, SiO2 insulator, and Si sensor by utilizing the silicon-on-insulator (SOI) technology. When the semiconductor detector is operated in orbit, it suffers from radiation damage due to X-rays emitted from the celestial objects as well as cosmic rays. From previous studies, positive charges trapped in the SiO2 insulator are known to cause the degradation of the detector performance. To improve the radiation hardness, we developed XRPIX equipped with Double-SOI (D-SOI) structure, introducing an additional silicon layer in the SiO2 insulator. This structure is aimed at compensating for the effect of the trapped positive charges. Although the radiation hardness to cosmic rays of the D-SOI detectors has been evaluated, the radiation effect due to the X-ray irradiation has not been evaluated. Then, we conduct an X-ray irradiation experiment using an X-ray generator with a total dose of 10 krad at the SiO2 insulator, equivalent to 7 years in orbit. As a result of this experiment, the energy resolution in full-width half maximum for the 5.9 keV X-ray degrades by 17.8 $\pm$ 2.8% and the dark current increases by 89 $\pm$ 13%. We also investigate the physical mechanism of the increase in the dark current due to X-ray irradiation using TCAD simulation. It is found that the increase in the dark current can be explained by the increase in the interface state density at the Si/SiO2 interface. △ Less

Submitted 26 May, 2022; originally announced May 2022.

Comments: 15 pages, 12 figures, accepted for publication in Journal of Astronomical Telescopes, Instruments, and Systems

Pre-Supernova Alert System for Super-Kamiokande

Authors: Super-Kamiokande Collaboration, :, L. N. Machado, K. Abe, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Okamoto, K. Sato, H. Sekiya, H. Shiba , et al. (202 additional authors not shown)

Abstract: In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient co… ▽ More In 2020, the Super-Kamiokande (SK) experiment moved to a new stage (SK-Gd) in which gadolinium (Gd) sulfate octahydrate was added to the water in the detector, enhancing the efficiency to detect thermal neutrons and consequently improving the sensitivity to low energy electron anti-neutrinos from inverse beta decay (IBD) interactions. SK-Gd has the potential to provide early alerts of incipient core-collapse supernovae through detection of electron anti-neutrinos from thermal and nuclear processes responsible for the cooling of massive stars before the gravitational collapse of their cores. These pre-supernova neutrinos emitted during the silicon burning phase can exceed the energy threshold for IBD reactions. We present the sensitivity of SK-Gd to pre-supernova stars and the techniques used for the development of a pre-supernova alarm based on the detection of these neutrinos in SK, as well as prospects for future SK-Gd phases with higher concentrations of Gd. For the current SK-Gd phase, high-confidence alerts for Betelgeuse could be issued up to nine hours in advance of the core-collapse itself. △ Less

Submitted 17 August, 2022; v1 submitted 19 May, 2022; originally announced May 2022.

Comments: 20 pages

Journal ref: The Astrophysical Journal, Volume 935, Number 1 (2022)

Novel Materials and Concepts for Next-Generation High Power Target Applications

Authors: Kavin Ammigan, Sujit Bidhar, Frederique Pellemoine, Vitaly Pronskikh, David Pushka, Katsuya Yonehara, Robert Zwaska, Adrien Couet, Michael Moorehead, Taku Ishida, Shunsuke Makimura, Christopher Densham, Michael Fitton, Eric Harvey-Fishenden, Tristan Davenne, David Jenkins, Peter Loveridge, Joe O'Dell, Chris Rogers, Dan Wilcox, Marco Calviani, Simone Gilardoni, Francois-Xavier Nuiry, Antonio Perillo-Marcone, Nathan Bultman , et al. (14 additional authors not shown)

Abstract: Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia… ▽ More Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Report number: FERMILAB-CONF-22-139-AD

Irradiation Facilities and Irradiation Methods for High Power Target

Authors: F. Pellemoine, C. Barbier, Y. Sun, K. Ammigan, S. Bidhar, B. Zwaska, D. McClintock, S. Taller, D. Winder, C. S. Cutler, D. Kim, Y. Chiu, M. Freer, C. Wheldon, A. Gottberg, F. Boix Pamies, M. Calviani, N. Charitonidis, R. Garcia Alia, F. Ravotti, S. Danzeca, A. P. Bernardes, N. Moncoffre, S. Meigo, T. Ishida , et al. (16 additional authors not shown)

Abstract: High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified… ▽ More High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified as the leading cross-cutting challenges of high-power target facilities. Target material R&D to address these challenges are essential to enable and ensure reliable operation of future-generation accelerators. Irradiation facilities and alternative methods are critical to provide a full support of material R&D and better address these critical challenges. △ Less

Submitted 14 December, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Report number: FERMILAB-CONF-22-124-AD

High Spatial Resolution Neutron Transmission Imaging Using a Superconducting Two-Dimensional Detector

Authors: Hiroaki Shishido, Kazuma Nishimura, The Dang Vu, Kazuya Aizawa, Kenji M. Kojima, Tomio Koyama, Kenichi Oikawa, Masahide Harada, Takayuki Oku, Kazuhiko Soyama, Shigeyuki Miyajima, Mutsuo Hidaka, Soh Y. Suzuki, Manobu M. Tanaka, Shuichi Kawamata, Takekazu Ishida

Abstract: Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-… ▽ More Neutron imaging is one of the most powerful tools for nondestructive inspection owing to the unique characteristics of neutron beams, such as high permeability for many heavy metals, high sensitivity for certain light elements, and isotope selectivity owing to a specific nuclear reaction between an isotope and neutrons. In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method for the pulsed neutron source. We obtained the neutron transmission images of a Gd-Al alloy sample, inside which single crystals of GdAl3 were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al-Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the ^{155}Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 X 12 um^2. Gd selective imaging was performed using the resonance dip of ^{155}Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm. △ Less

Submitted 8 October, 2021; originally announced October 2021.

Comments: 7 pages, 6 figures, Accepted in Journal of IEEE transactions of Applied Superconductivity

First Gadolinium Loading to Super-Kamiokande

Authors: K. Abe, C. Bronner, Y. Hayato, K. Hiraide, M. Ikeda, S. Imaizumi, J. Kameda, Y. Kanemura, Y. Kataoka, S. Miki, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, Y. Sonoda, Y. Suzuki, A. Takeda, Y. Takemoto , et al. (192 additional authors not shown)

Abstract: In order to improve Super-Kamiokande's neutron detection efficiency and to thereby increase its sensitivity to the diffuse supernova neutrino background flux, 13 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ (gadolinium sulfate octahydrate) was dissolved into the detector's otherwise ultrapure water from July 14 to August 17, 2020, marking the start of the SK-Gd phase of operations. During the loa… ▽ More In order to improve Super-Kamiokande's neutron detection efficiency and to thereby increase its sensitivity to the diffuse supernova neutrino background flux, 13 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ (gadolinium sulfate octahydrate) was dissolved into the detector's otherwise ultrapure water from July 14 to August 17, 2020, marking the start of the SK-Gd phase of operations. During the loading, water was continuously recirculated at a rate of 60 m$^3$/h, extracting water from the top of the detector and mixing it with concentrated $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ solution to create a 0.02% solution of the Gd compound before injecting it into the bottom of the detector. A clear boundary between the Gd-loaded and pure water was maintained through the loading, enabling monitoring of the loading itself and the spatial uniformity of the Gd concentration over the 35 days it took to reach the top of the detector. During the subsequent commissioning the recirculation rate was increased to 120 m$^3$/h, resulting in a constant and uniform distribution of Gd throughout the detector and water transparency equivalent to that of previous pure-water operation periods. Using an Am-Be neutron calibration source the mean neutron capture time was measured to be $115\pm1$ $μ$s, which corresponds to a Gd concentration of $111\pm2$ ppm, as expected for this level of Gd loading. This paper describes changes made to the water circulation system for this detector upgrade, the Gd loading procedure, detector commissioning, and the first neutron calibration measurements in SK-Gd. △ Less

Submitted 15 December, 2021; v1 submitted 1 September, 2021; originally announced September 2021.

Comments: 37 pages, 19 Figures, Accepted for publication in Nucl. Instrum. Meth. A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1027 (2022) 166248

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

Search for solar electron anti-neutrinos due to spin-flavor precession in the Sun with Super-Kamiokande-IV

Authors: Super-Kamiokande Collaboration, :, K. Abe, C. Bronner, Y. Hayato, M. Ikeda, S. Imaizumi, H. Ito, J. Kameda, Y. Kataoka, M. Miura, S. Moriyama, Y. Nagao, M. Nakahata, Y. Nakajima, S. Nakayama, T. Okada, K. Okamoto, A. Orii, G. Pronost, H. Sekiya, M. Shiozawa, Y. Sonoda, Y. Suzuki, A. Takeda , et al. (177 additional authors not shown)

Abstract: Due to a very low production rate of electron anti-neutrinos ($\barν_e$) via nuclear fusion in the Sun, a flux of solar $\barν_e$ is unexpected. An appearance of $\barν_e$ in solar neutrino flux opens a new window for the new physics beyond the standard model. In particular, a spin-flavor precession process is expected to convert an electron neutrino into an electron anti-neutrino (… ▽ More Due to a very low production rate of electron anti-neutrinos ($\barν_e$) via nuclear fusion in the Sun, a flux of solar $\barν_e$ is unexpected. An appearance of $\barν_e$ in solar neutrino flux opens a new window for the new physics beyond the standard model. In particular, a spin-flavor precession process is expected to convert an electron neutrino into an electron anti-neutrino (${ν_e\to\barν_e}$) when neutrino has a finite magnetic moment. In this work, we have searched for solar $\barν_e$ in the Super-Kamiokande experiment, using neutron tagging to identify their inverse beta decay signature. We identified 78 $\barν_e$ candidates for neutrino energies of 9.3 to 17.3 MeV in 2970.1 live days with a fiducial volume of 22.5 kiloton water (183.0 kton$\cdot$year exposure). The energy spectrum has been consistent with background predictions and we thus derived a 90% confidence level upper limit of ${4.7\times10^{-4}}$ on the $ν_e\to\barν_e$ conversion probability in the Sun. We used this result to evaluate the sensitivity of future experiments, notably the Super-Kamiokande Gadolinium (SK-Gd) upgrade. △ Less

Submitted 17 March, 2022; v1 submitted 7 December, 2020; originally announced December 2020.

Comments: 16 pages, 10 figures, 7 tables

Journal ref: Astroparticle Physics 139 (2022) 102702

Homogeneity of neutron transmission imaging over a large sensitive area with a four-channel superconducting detector

Authors: The Dang Vu, Hiroaki Shishido, Kenji M. Kojima, Tomio Koyama, Kenichi Oikawa, Masahide Harada, Shigeyuki Miyajima, Takayuki Oku, Kazuhiko Soyama, Kazuya Aizawa, Mutsuo Hidaka, Soh Y. Suzuki, Manobu M. Tanaka, Alex Malins, Masahiko Machida, Takekazu Ishida

Abstract: We previously proposed a method to detect neutrons by using a current-biased kinetic inductance detector (CB-KID), where neutrons are converted into charged particles using a 10B conversion layer. The charged particles are detected based on local changes in kinetic inductance of X and Y superconducting meanderlines under a modest DC bias current. The system uses a delay-line method to locate the p… ▽ More We previously proposed a method to detect neutrons by using a current-biased kinetic inductance detector (CB-KID), where neutrons are converted into charged particles using a 10B conversion layer. The charged particles are detected based on local changes in kinetic inductance of X and Y superconducting meanderlines under a modest DC bias current. The system uses a delay-line method to locate the positions of neutron-10B reactions by acquiring the four arrival timestamps of signals that propagate from hot spots created by a passing charged particle to the end electrodes of the meanderlines. Unlike conventional multi-pixel imaging systems, the CB-KID system performs high spatial resolution imaging over a 15 mm x 15 mm sensitive area using only four channel readouts. Given the large sensitive area, it is important to check the spatial homogeneity and linearity of detected neutron positions when imaging with CB-KID. To this end we imaged a pattern of 10B dot absorbers with a precise dot pitch to investigate the spatial homogeneity of the detector. We confirmed the spatial homogeneity of detected dot positions based on the distribution of measured dot pitches across the sensitive area of the detector. We demonstrate potential applications of the system by taking a clear transmission image of tiny metallic screws and nuts and a ladybug. The image was useful for characterizing the ladybug noninvasively. Detection efficiencies were low when the detector was operated at 4 K, so we plan to explore raising the operating temperature towards the critical temperature of the detector as a means to improve counting rates. △ Less

Submitted 14 October, 2020; originally announced October 2020.

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

Tensile behavior of dual-phase titanium alloys under high-intensity proton beam exposure: radiation-induced omega phase transformation in Ti-6Al-4V

Authors: Taku Ishida, Eiichi Wakai, Shunsuke Makimura, Andrew M. Casella, Danny J. Edwards, Ramprashad Prabhakaran, David J. Senor, Kavin Ammigan, Sujit Bidhar, Patrick G. Hurh, Frederique Pellemoine, Christopher J. Densham, Michael D. Fitton, Joe M. Bennett, Dohyun Kim, Nikolaos Simos, Masayuki Hagiwara, Naritoshi Kawamura, Shin-ichiro Meigo, Katsuya Yonehara

Abstract: A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window material. The radiation damage level of the analyzed capsule was 0.25 dpa at beam center region with an irradiation temperature around 120 degree C. Tensile tests sh… ▽ More A high-intensity proton beam exposure with 181 MeV energy has been conducted at Brookhaven Linac Isotope Producer facility on various material specimens for accelerator targetry applications, including titanium alloys as a beam window material. The radiation damage level of the analyzed capsule was 0.25 dpa at beam center region with an irradiation temperature around 120 degree C. Tensile tests showed increased hardness and a large decrease in ductility for the dual alpha+beta-phase Ti-6Al-4V Grade-5 and Grade-23 extra low interstitial alloys, with the near alpha-phase Ti-3Al-2.5V Grade-9 alloy still exhibiting uniform elongation of a few % after irradiation. Transmission Electron Microscope analyses on Ti-6Al-4V indicated clear evidence of a high-density of defect clusters with size less than 2 nm in each alpha-phase grain. The beta-phase grains did not contain any visible defects such as loops or black dots, while the diffraction patterns clearly indicated omega-phase precipitation in an advanced formation stage. The radiation-induced omega-phase transformation in the beta-phase could lead to greater loss of ductility in Ti-6Al-4V alloys in comparison with Ti-3Al-2.5V alloy with less beta-phase. △ Less

Submitted 30 July, 2020; v1 submitted 24 April, 2020; originally announced April 2020.

Comments: 23 pages, 9 figures, In Press

Journal ref: Journal of Nuclear Materials, Available online 25 July 2020, 152413

Monte Carlo Radiation Transport Modelling of the Current-Biased Kinetic Inductance Detector

Authors: Alex Malins, Masahiko Machida, The Dang Vu, Kazuya Aizawa, Takekazu Ishida

Abstract: Radiation transport simulations were used to analyse neutron imaging with the current-biased kinetic inductance detector (CB-KID). The PHITS Monte Carlo code was applied for simulating neutron, $^{4}$He, $^{7}$Li, photon and electron transport, $^{10}$B(n,$α$)$^{7}$Li reactions, and energy deposition by particles within CB-KID. Slight blurring in simulated CB-KID images originated $^{4}$He and… ▽ More Radiation transport simulations were used to analyse neutron imaging with the current-biased kinetic inductance detector (CB-KID). The PHITS Monte Carlo code was applied for simulating neutron, $^{4}$He, $^{7}$Li, photon and electron transport, $^{10}$B(n,$α$)$^{7}$Li reactions, and energy deposition by particles within CB-KID. Slight blurring in simulated CB-KID images originated $^{4}$He and $^{7}$Li ions spreading out in random directions from the $^{10}$B conversion layer in the detector prior to causing signals in the $X$ and $Y$ superconducting Nb nanowire meander lines. 478 keV prompt gamma rays emitted by $^{7}$Li nuclei from neutron-$^{10}$B reactions had negligible contribution to the simulated CB-KID images. Simulated neutron images of $^{10}$B dot arrays indicate that sub 10 $μ$m resolution imaging should be feasible with the current CB-KID design. The effect of the geometrical structure of CB-KID on the intrinsic detection efficiency was calculated from the simulations. An analytical equation was then developed to approximate this contribution to the detection efficiency. Detection efficiencies calculated in this study are upper bounds for the reality as the effects of detector temperature, the bias current, signal processing and dead-time losses were not taken into account. The modelling strategies employed in this study could be used to evaluate modifications to the CB-KID design prior to actual fabrication and testing, conveying a time and cost saving. △ Less

Submitted 26 November, 2019; v1 submitted 26 November, 2019; originally announced November 2019.

Comments: 23 pages, 7 figures, Author Accepted Manuscript (8th Nov 2019), Nuclear Instruments and Methods in Physics Research A

Journal ref: Nuclear Instruments and Methods in Physics Research A 953, 163130 (2020)

Radiation Damage Studies on Titanium Alloys as High Intensity Proton Accelerator Beam Window Materials

Authors: Taku Ishida, Eiichi Wakai, Shunsuke Makimura, Patrick G. Hurh, Kavin Ammigan, Andrew M. Casella, Danny J. Edwards, David J. Senor, Christopher J. Densham, Michael Fitton, Joe Bennett, Dohyun Kim, Nikolaos Simos, Marco Calviani, Claudio Torregrosa Martin

Abstract: A high-strength dual alpha+beta phase titanium alloy Ti-6Al-4V is utilized as a material for beam windows in several accelerator target facilities. However, relatively little is known about how material properties of this alloy are affected by high-intensity proton beam irradiation. With plans to upgrade neutrino facilities at J-PARC and Fermilab to over 1 MW beam power, the radiation damage in th… ▽ More A high-strength dual alpha+beta phase titanium alloy Ti-6Al-4V is utilized as a material for beam windows in several accelerator target facilities. However, relatively little is known about how material properties of this alloy are affected by high-intensity proton beam irradiation. With plans to upgrade neutrino facilities at J-PARC and Fermilab to over 1 MW beam power, the radiation damage in the window material will reach a few displacements per atom (dpa) per year, significantly above the ~0.3 dpa level of existing data. The RaDIATE collaboration has conducted a high intensity proton beam irradiation of various target and window material specimens at BLIP facility, including a variety of titanium alloys. Post-Irradiation Examination of the specimens in the 1st capsule, irradiated at up to 0.25 dpa, is in progress. Tensile tests in a hot cell at PNNL exhibited a clear signature of radiation hardening and loss of ductility for Ti-6Al-4V, while Ti-3Al-2.5V, with less beta phase, exhibited less severe hardening. Microstructural investigations will follow to study the cause of the difference in tensile behavior between these alloys. High-cycle fatigue (HCF) performance is critical to the lifetime estimation of beam windows exposed to a periodic thermal stress from a pulsed proton beam. The 1st HCF data on irradiated titanium alloys are to be obtained by a conventional bend fatigue test at Fermilab and by an ultrasonic mesoscale fatigue test at Culham Laboratory. Specimens in the 2nd capsule, irradiated at up to ~1 dpa, cover typical titanium alloy grades, including possible radiation-resistant candidates. These systematic studies on the effects of radiation damage of titanium alloys are intended to enable us to predict realistic lifetimes of current beam windows made of Ti-6Al-4V and to extend the lifetime by choosing a more radiation and thermal shock tolerant alloy. △ Less

Submitted 22 November, 2019; originally announced November 2019.

Comments: 10 pages, 7 figures, In Proc. of IWSMT-14, 14th International Workshop on Spallation Materials Technology, 11th-17th Nov. 2018 at Fukushima, Japan

Energy-resolved neutron imaging with high spatial resolution using a superconducting delay-line kinetic inductance detector

Authors: Yuki Iizawa, Hiroaki Shishido, Kazuma Nishimura, The Dang Vu, Kenji M. Kojima, Tomio Koyama, Kenichi Oikawa, Masahide Harada, Shigeyuki Miyajima, Mutsuo Hidaka, Takayuki Oku, Kazuhiko Soyama, Kazuya Aizawa, Soh Y. Suzuki, Takekazu Ishida

Abstract: Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution. Substantial efforts have been devoted to develo** a high spatial and temporal resolution neutron imager. We have been develo** a neutron imager aiming at conduc… ▽ More Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution. Substantial efforts have been devoted to develo** a high spatial and temporal resolution neutron imager. We have been develo** a neutron imager aiming at conducting high spatial and temporal resolution imaging based on a delay-line neutron detector, called the current-biased kinetic-inductance detector, with a conversion layer $^{10}$B. The detector allowed us to obtain a neutron transmission image with four signal readout lines. Herein, we expanded the sensor active area, and improved the spatial resolution of the detector. We examined the capability of high spatial resolution neutron imaging over the sensor active area of 15 $\times$ 15 mm$^2$ for various samples, including biological and metal ones. We also demonstrated an energy-resolved neutron image in which stainless-steel specimens were discriminating of other specimens with the aid of the Bragg edge transmission. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Comments: 17 pages, 6 figures

Journal ref: Superconductor Science and Technology, 32 (2019) 125009

J-PARC Neutrino Beamline Upgrade Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, S. Ban, F. C. T. Barbato, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, S. Bolognesi , et al. (360 additional authors not shown)

Abstract: In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut… ▽ More In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described. △ Less

Submitted 14 August, 2019; originally announced August 2019.

Measurement of the $ν_μ$ charged-current cross sections on water, hydrocarbon, iron, and their ratios with the T2K on-axis detectors

Authors: K. Abe, R. Akutsu, A. Ali, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, Y. Ashida, Y. Awataguchi, Y. Azuma, S. Ban, M. Barbi, G. J. Barker, G. Barr, C. Barry, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, S. Berkman, R. M. Berner, L. Berns, S. Bhadra, S. Bienstock, A. Blondely , et al. (292 additional authors not shown)

Abstract: We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817… ▽ More We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817$\pm 0.007$(stat.)$^{+0.11}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, and $σ^{\rm{Fe}}_{\rm{CC}}$ = (0.859$\pm 0.003$(stat.) $^{+0.12}_{-0.10}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon respectively, for a restricted phase space of induced muons: $θ_μ<45^{\circ}$ and $p_μ>$0.4 GeV/$c$ in the laboratory frame. The measured cross section ratios are ${σ^{\rm{H_{2}O}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.028$\pm 0.016$(stat.)$\pm 0.053$(syst.), ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{H_{2}O}}_{\rm{CC}}}$ = 1.023$\pm 0.012$(stat.)$\pm 0.058$(syst.), and ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.049$\pm 0.010$(stat.)$\pm 0.043$(syst.). These results, with an unprecedented precision for the measurements of neutrino cross sections on water in the studied energy region, show good agreement with the current neutrino interaction models used in the T2K oscillation analyses. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Journal ref: Prog Theor Exp Phys (2019)

Laminar-turbulent coexistence in annular Couette flow

Authors: Kohei Kunii, Takahiro Ishida, Yohann Duguet, Takahiro Tsukahara

Abstract: Annular Couette flow is the flow between two coaxial cylinders driven by the axial translation of the inner cylinder. It is investigated using direct numerical simulation in long domains, with an emphasis on the laminar-turbulent coexistence regime found for marginally low values of the Reynolds number. Three distinct flow regimes are demonstrated as the radius ratio $η$ is decreased from 0.8 to 0… ▽ More Annular Couette flow is the flow between two coaxial cylinders driven by the axial translation of the inner cylinder. It is investigated using direct numerical simulation in long domains, with an emphasis on the laminar-turbulent coexistence regime found for marginally low values of the Reynolds number. Three distinct flow regimes are demonstrated as the radius ratio $η$ is decreased from 0.8 to 0.5 and finally to 0.1. The high-$η$ regime features helically-shaped turbulent patches coexisting with laminar flow, as in planar shear flows. The moderate-$η$ regime does not feature any marked laminar-turbulent coexistence. In an effort to discard confinement effects, proper patterning is however recovered by artificially extending the azimuthal span beyond 2$π$. Eventually, the low-$η$ regime features localised turbulent structures different from the puffs commonly encountered in transitional pipe flow. In this new coexistence regime, turbulent fluctuations are surprisingly short-ranged. Implications are discussed in terms of phase transition and critical scaling. △ Less

Submitted 6 October, 2019; v1 submitted 19 April, 2019; originally announced April 2019.

Comments: 24 pages, 17 figures

MSC Class: 76F65 (Primary); 76F06 (Secondary)

Journal ref: Journal of Fluid Mechanics (2019), vol. 879, pp. 579--603

T2K ND280 Upgrade -- Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, D. Attié, S. Ban, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, J. Boix, S. Bolognesi , et al. (359 additional authors not shown)

Abstract: In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve… ▽ More In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve the physics reach of the T2K-II project. This goal is achieved by modifying the upstream part of the detector, adding a new highly granular scintillator detector (Super-FGD), two new TPCs (High-Angle TPC) and six TOF planes. Details about the detector concepts, design and construction methods are presented, as well as a first look at the test-beam data taken in Summer 2018. An update of the physics studies is also presented. △ Less

Submitted 14 October, 2020; v1 submitted 11 January, 2019; originally announced January 2019.

Comments: 196 pages

Report number: CERN-SPSC-2019-001 (SPSC-TDR-006)

A new electron-multiplier-tube-based beam monitor for muon monitoring at the T2K experiment

Authors: Yosuke Ashida, Megan Friend, Atsuko Ichikawa, Taku Ishida, Hajime Kubo, Keigo Nakamura, Ken Sakashita, Wataru Uno

Abstract: Muon beam monitoring is indispensable for indirectly monitoring accelerator-produced neutrino beams in real time. Though Si photodiodes and ionization chambers have been successfully used as muon monitors at the T2K experiment, sensors that are more radiation tolerant are desired for future operation. We have investigated the electron-multiplier tube (EMT) as a new sensor for muon monitoring. Seco… ▽ More Muon beam monitoring is indispensable for indirectly monitoring accelerator-produced neutrino beams in real time. Though Si photodiodes and ionization chambers have been successfully used as muon monitors at the T2K experiment, sensors that are more radiation tolerant are desired for future operation. We have investigated the electron-multiplier tube (EMT) as a new sensor for muon monitoring. Secondary electrons produced by the passage of muons at dynodes are multiplied in the tube and produce signal. Two prototype detectors were installed at the T2K muon monitor location, and various EMT properties were studied based on in situ data taken with the T2K muon beam. The signal size is as expected based on calculation, and the EMTs show a sufficiently fast time response for bunch-by-bunch beam monitoring. The spill-by-spill intensity resolution is 0.4%, better than the required value (1%). Signal linearity within $\pm$1% is achieved at proton beam powers up to 460 kW (with +250 kA focusing horn operation). A gradual signal decrease was observed during the initial exposure, due to the stabilization of dynode materials, before the response became stable within $\pm$1%. This work demonstrates that EMTs are a good candidate for future muon monitoring at T2K, and may also have other more general applications. △ Less

Submitted 1 November, 2018; v1 submitted 20 May, 2018; originally announced May 2018.

Comments: 23 pages, 20 figures, 6 tables

Journal ref: Progress of Theoretical and Experimental Physics, Volume 2018, Issue 10, 1 October 2018, 103H01

Hyper-Kamiokande Design Report

Authors: Hyper-Kamiokande Proto-Collaboration, :, K. Abe, Ke. Abe, H. Aihara, A. Aimi, R. Akutsu, C. Andreopoulos, I. Anghel, L. H. V. Anthony, M. Antonova, Y. Ashida, V. Aushev, M. Barbi, G. J. Barker, G. Barr, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, L. Berns, T. Berry, S. Bhadra, D. Bravo-Berguño, F. d. M. Blaszczyk , et al. (291 additional authors not shown)

Abstract: On the strength of a double Nobel prize winning experiment (Super)Kamiokande and an extremely successful long baseline neutrino programme, the third generation Water Cherenkov detector, Hyper-Kamiokande, is being developed by an international collaboration as a leading worldwide experiment based in Japan. The Hyper-Kamiokande detector will be hosted in the Tochibora mine, about 295 km away from th… ▽ More On the strength of a double Nobel prize winning experiment (Super)Kamiokande and an extremely successful long baseline neutrino programme, the third generation Water Cherenkov detector, Hyper-Kamiokande, is being developed by an international collaboration as a leading worldwide experiment based in Japan. The Hyper-Kamiokande detector will be hosted in the Tochibora mine, about 295 km away from the J-PARC proton accelerator research complex in Tokai, Japan. The currently existing accelerator will be steadily upgraded to reach a MW beam by the start of the experiment. A suite of near detectors will be vital to constrain the beam for neutrino oscillation measurements. A new cavern will be excavated at the Tochibora mine to host the detector. The experiment will be the largest underground water Cherenkov detector in the world and will be instrumented with new technology photosensors, faster and with higher quantum efficiency than the ones in Super-Kamiokande. The science that will be developed will be able to shape the future theoretical framework and generations of experiments. Hyper-Kamiokande will be able to measure with the highest precision the leptonic CP violation that could explain the baryon asymmetry in the Universe. The experiment also has a demonstrated excellent capability to search for proton decay, providing a significant improvement in discovery sensitivity over current searches for the proton lifetime. The atmospheric neutrinos will allow to determine the neutrino mass ordering and, together with the beam, able to precisely test the three-flavour neutrino oscillation paradigm and search for new phenomena. A strong astrophysical programme will be carried out at the experiment that will detect supernova neutrinos and will measure precisely solar neutrino oscillation. △ Less

Submitted 28 November, 2018; v1 submitted 9 May, 2018; originally announced May 2018.

Comments: 325 pages

Turbulent bifurcations in intermittent shear flows: from puffs to oblique stripes

Authors: Takahiro Ishida, Yohann Duguet, Takahiro Tsukahara

Abstract: Localised turbulent structures such as puffs or oblique stripes are building blocks of the intermittency regimes in subcritical wall-bounded shear flows. These turbulent structures are investigated in incompressible pressure-driven annular pipe flow using direct numerical simulations in long domains. For low enough radius ratio $η$, these coherent structures have a dynamics comparable to that of p… ▽ More Localised turbulent structures such as puffs or oblique stripes are building blocks of the intermittency regimes in subcritical wall-bounded shear flows. These turbulent structures are investigated in incompressible pressure-driven annular pipe flow using direct numerical simulations in long domains. For low enough radius ratio $η$, these coherent structures have a dynamics comparable to that of puffs in cylindrical pipe flow. For $η$ larger than 0.5, they take the shape of helical stripes inclined with respect to the axial direction. The transition from puffs to stripes is analysed statistically by focusing on the axisymmetry properties of the associated large-scale flows. It is shown that the transition is gradual : as the azimuthal confinement relaxes, allowing for an azimuthal large-scale component, oblique stripes emerge as predicted in the planar limit. The generality of this transition mechanism is discussed in the context of subcritical shear flows. △ Less

Submitted 8 May, 2017; originally announced May 2017.

Comments: 17 pages, 18 figures

MSC Class: 76F06 (Primary); 76F65 (Secondary)

Journal ref: Phys. Rev. Fluids 2 (2017) 073902

Physics Potentials with the Second Hyper-Kamiokande Detector in Korea

Authors: Hyper-Kamiokande proto-collaboration, :, K. Abe, Ke. Abe, S. H. Ahn, H. Aihara, A. Aimi, R. Akutsu, C. Andreopoulos, I. Anghel, L. H. V. Anthony, M. Antonova, Y. Ashida, V. Aushev, M. Barbi, G. J. Barker, G. Barr, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, L. Berns, T. Berry, S. Bhadra, D. Bravo-Bergu no , et al. (331 additional authors not shown)

Abstract: Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are sev… ▽ More Hyper-Kamiokande consists of two identical water-Cherenkov detectors of total 520~kt with the first one in Japan at 295~km from the J-PARC neutrino beam with 2.5$^{\textrm{o}}$ Off-Axis Angles (OAAs), and the second one possibly in Korea in a later stage. Having the second detector in Korea would benefit almost all areas of neutrino oscillation physics mainly due to longer baselines. There are several candidate sites in Korea with baselines of 1,000$\sim$1,300~km and OAAs of 1$^{\textrm{o}}$$\sim$3$^{\textrm{o}}$. We conducted sensitivity studies on neutrino oscillation physics for a second detector, either in Japan (JD $\times$ 2) or Korea (JD + KD) and compared the results with a single detector in Japan. Leptonic CP violation sensitivity is improved especially when the CP is non-maximally violated. The larger matter effect at Korean candidate sites significantly enhances sensitivities to non-standard interactions of neutrinos and mass ordering determination. Current studies indicate the best sensitivity is obtained at Mt. Bisul (1,088~km baseline, $1.3^\circ$ OAA). Thanks to a larger (1,000~m) overburden than the first detector site, clear improvements to sensitivities for solar and supernova relic neutrino searches are expected. △ Less

Submitted 26 March, 2018; v1 submitted 18 November, 2016; originally announced November 2016.

Comments: 102 pages, 49 figures. Accepted by PTEP

Journal ref: Prog Theor Exp Phys (2018)

Proposal for an Extended Run of T2K to $20\times10^{21}$ POT

Authors: K. Abe, H. Aihara, A. Amji, J. Amey, C. Andreopoulos, M. Antonova, S. Aoki, A. Atherton, S. Ban, F. C. T. Barbato, M. Barbi, F. C. T. Barbato, G. J. Barker, G. Barr, P. Bartet-Friburg, M. Batkiewicz, V. Berardi, S. Bhadra, S. Bienstock, A. Blondel, S. Bolognesi, S. Bordoni, S. B. Boyd, D. Brailsford, A. Bravar , et al. (292 additional authors not shown)

Abstract: Recent measurements by the T2K neutrino oscillation experiment indicate that CP violation in neutrino mixing may be observed in the future by long-baseline neutrino oscillation experiments. We propose an extension to the currently approved T2K running from $7.8\times 10^{21}~\mbox{POT}$ to $20\times 10^{21}~\mbox{POT}$, aiming at initial observation of CP violation with 3$\,σ$ or higher significan… ▽ More Recent measurements by the T2K neutrino oscillation experiment indicate that CP violation in neutrino mixing may be observed in the future by long-baseline neutrino oscillation experiments. We propose an extension to the currently approved T2K running from $7.8\times 10^{21}~\mbox{POT}$ to $20\times 10^{21}~\mbox{POT}$, aiming at initial observation of CP violation with 3$\,σ$ or higher significance for the case of maximum CP violation. The program also contains a measurement of mixing parameters, $θ_{23}$ and $Δm^2_{32}$, with a precision of 1.7$^\circ$ or better and 1%, respectively. With accelerator and beamline upgrades, as well as analysis improvements, this program would occur before the next generation of long-baseline neutrino oscillation experiments that are expected to start operation in 2026. △ Less

Submitted 13 September, 2016; originally announced September 2016.

Comments: 68 pages, 31 figures

Solar Neutrino Measurements in Super-Kamiokande-IV

Authors: Super-Kamiokande Collaboration, :, K. Abe, Y. Haga, Y. Hayato, M. Ikeda, K. Iyogi, J. Kameda, Y. Kishimoto, Ll. Marti, M. Miura, S. Moriyama, M. Nakahata, T. Nakajima, S. Nakayama, A. Orii, H. Sekiya, M. Shiozawa, Y. Sonoda, A. Takeda, H. Tanaka, Y. Takenaga, S. Tasaka, T. Tomura, K. Ueno , et al. (146 additional authors not shown)

Abstract: Upgraded electronics, improved water system dynamics, better calibration and analysis techniques allowed Super-Kamiokande-IV to clearly observe very low-energy 8B solar neutrino interactions, with recoil electron kinetic energies as low as 3.49 MeV. Super-Kamiokande-IV data-taking began in September of 2008; this paper includes data until February 2014, a total livetime of 1664 days. The measured… ▽ More Upgraded electronics, improved water system dynamics, better calibration and analysis techniques allowed Super-Kamiokande-IV to clearly observe very low-energy 8B solar neutrino interactions, with recoil electron kinetic energies as low as 3.49 MeV. Super-Kamiokande-IV data-taking began in September of 2008; this paper includes data until February 2014, a total livetime of 1664 days. The measured solar neutrino flux is (2.308+-0.020(stat.) + 0.039-0.040(syst.)) x 106/(cm2sec) assuming no oscillations. The observed recoil electron energy spectrum is consistent with no distortions due to neutrino oscillations. An extended maximum likelihood fit to the amplitude of the expected solar zenith angle variation of the neutrino-electron elastic scattering rate in SK-IV results in a day/night asymmetry of (-3.6+-1.6(stat.)+-0.6(syst.))%. The SK-IV solar neutrino data determine the solar mixing angle as sin2 theta_12 = 0.327+0.026-0.031, all SK solar data (SK-I, SK-II, SK III and SKIV) measures this angle to be sin2 theta_12 = 0.334+0.027-0.023, the determined mass-squared splitting is Delta m2_21 = 4.8+1.5-0.8 x10-5 eV2. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Comments: Submitted to Physical Review D; 23 pages, 40 figures

Measurements of the atmospheric neutrino flux by Super-Kamiokande: energy spectra, geomagnetic effects, and solar modulation

Authors: E. Richard, K. Okumura, K. Abe, Y. Haga, Y. Hayato, M. Ikeda, K. Iyogi, J. Kameda, Y. Kishimoto, M. Miura, S. Moriyama, M. Nakahata, T. Nakajima, Y. Nakano, S. Nakayama, A. Orii, H. Sekiya, M. Shiozawa, A. Takeda, H. Tanaka, T. Tomura, R. A. Wendell, R. Akutsu, T. Irvine, T. Kajita , et al. (104 additional authors not shown)

Abstract: A comprehensive study on the atmospheric neutrino flux in the energy region from sub-GeV up to several TeV using the Super-Kamiokande water Cherenkov detector is presented in this paper. The energy and azimuthal spectra of the atmospheric $ν_e+{\barν}_e$ and $ν_μ+{\barν}_μ$ fluxes are measured. The energy spectra are obtained using an iterative unfolding method by combining various event topologie… ▽ More A comprehensive study on the atmospheric neutrino flux in the energy region from sub-GeV up to several TeV using the Super-Kamiokande water Cherenkov detector is presented in this paper. The energy and azimuthal spectra of the atmospheric $ν_e+{\barν}_e$ and $ν_μ+{\barν}_μ$ fluxes are measured. The energy spectra are obtained using an iterative unfolding method by combining various event topologies with differing energy responses. The azimuthal spectra depending on energy and zenith angle, and their modulation by geomagnetic effects, are also studied. A predicted east-west asymmetry is observed in both the $ν_e$ and $ν_μ$ samples at 8.0 σ and 6.0 σ significance, respectively, and an indication that the asymmetry dipole angle changes depending on the zenith angle was seen at the 2.2 σ level. The measured energy and azimuthal spectra are consistent with the current flux models within the estimated systematic uncertainties. A study of the long-term correlation between the atmospheric neutrino flux and the solar magnetic activity cycle is also performed, and a weak indication of a correlation was seen at the 1.1 σ level, using SK I-IV data spanning a 20 year period. For particularly strong solar activity periods known as Forbush decreases, no theoretical prediction is available, but a deviation below the typical neutrino event rate is seen at the 2.4 σ level. △ Less

Submitted 6 September, 2016; v1 submitted 27 October, 2015; originally announced October 2015.

Comments: 30 pages, 31 figures

Journal ref: Phys. Rev. D 94, 052001 (2016)

Development and operational experience of magnetic horn system for T2K experiment

Authors: T. Sekiguchi, K. Bessho, Y. Fujii, M. Hagiwara, T. Hasegawa, K. Hayashi, T. Ishida, T. Ishii, H. Kobayashi, T. Kobayashi, S. Koike, K. Koseki, T. Maruyama, H. Matsumoto, T. Nakadaira, K. Nakamura, K. Nakayoshi, K. Nishikawa, Y. Oyama, K. Sakashita, M. Shibata, Y. Suzuki, M. Tada, K. Takahashi, T. Tsukamoto , et al. (12 additional authors not shown)

Abstract: A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production targe… ▽ More A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production target. No significant damage was observed throughout this period. This successful operation of the T2K magnetic horns led to the discovery of the $ν_μ\rightarrowν_e$ oscillation phenomenon in 2013 by the T2K experiment. In this paper, details of the design, construction, and operation experience of the T2K magnetic horns are described. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 22 pages, 40 figures, also submitted to Nuclear Instrument and Methods in Physics Research, A

A Long Baseline Neutrino Oscillation Experiment Using J-PARC Neutrino Beam and Hyper-Kamiokande

Authors: Hyper-Kamiokande Working Group, :, K. Abe, H. Aihara, C. Andreopoulos, I. Anghel, A. Ariga, T. Ariga, R. Asfandiyarov, M. Askins, J. J. Back, P. Ballett, M. Barbi, G. J. Barker, G. Barr, F. Bay, P. Beltrame, V. Berardi, M. Bergevin, S. Berkman, T. Berry, S. Bhadra, F. d. M. Blaszczyk, A. Blondel, S. Bolognesi , et al. (224 additional authors not shown)

Abstract: Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this document, the physics potential o… ▽ More Hyper-Kamiokande will be a next generation underground water Cherenkov detector with a total (fiducial) mass of 0.99 (0.56) million metric tons, approximately 20 (25) times larger than that of Super-Kamiokande. One of the main goals of Hyper-Kamiokande is the study of $CP$ asymmetry in the lepton sector using accelerator neutrino and anti-neutrino beams. In this document, the physics potential of a long baseline neutrino experiment using the Hyper-Kamiokande detector and a neutrino beam from the J-PARC proton synchrotron is presented. The analysis has been updated from the previous Letter of Intent [K. Abe et al., arXiv:1109.3262 [hep-ex]], based on the experience gained from the ongoing T2K experiment. With a total exposure of 7.5 MW $\times$ 10$^7$ sec integrated proton beam power (corresponding to $1.56\times10^{22}$ protons on target with a 30 GeV proton beam) to a $2.5$-degree off-axis neutrino beam produced by the J-PARC proton synchrotron, it is expected that the $CP$ phase $δ_{CP}$ can be determined to better than 19 degrees for all possible values of $δ_{CP}$, and $CP$ violation can be established with a statistical significance of more than $3\,σ$ ($5\,σ$) for $76%$ ($58%$) of the $δ_{CP}$ parameter space. △ Less

Submitted 18 January, 2015; v1 submitted 15 December, 2014; originally announced December 2014.

Comments: Document submitted to 18th J-PARC PAC meeting in May 2014. 50 pages, 41 figures

Letter of Intent to Construct a nuPRISM Detector in the J-PARC Neutrino Beamline

Authors: S. Bhadra, A. Blondel, S. Bordoni, A. Bravar, C. Bronner, J. Caravaca-Rodriguez, M. Dziewiecki, T. Feusels, G. A. Fiorentini-Aguirre, M. Friend, L. Haegel, M. Hartz, R. Henderson, T. Ishida, M. Ishitsuka, C. K. Jung, A. C. Kaboth, H. Kakuno, H. Kamano, A. Konaka, Y. Kudenko, M. Kuze, T. Lindner, K. Mahn, J. F. Martin , et al. (25 additional authors not shown)

Abstract: As long-baseline neutrino experiments enter the precision era, the difficulties associated with understanding neutrino interaction cross sections on atomic nuclei are expected to limit experimental sensitivities to oscillation parameters. In particular, the ability to relate experimental observables to neutrino energy in previous experiments has relied solely on theoretical models of neutrino-nucl… ▽ More As long-baseline neutrino experiments enter the precision era, the difficulties associated with understanding neutrino interaction cross sections on atomic nuclei are expected to limit experimental sensitivities to oscillation parameters. In particular, the ability to relate experimental observables to neutrino energy in previous experiments has relied solely on theoretical models of neutrino-nucleus interactions, which currently suffer from very large theoretical uncertainties. By observing charged current $ν_μ$ interactions over a continuous range of off-axis angles from 1 to 4 degrees, the nuPRISM water Cherenkov detector can provide a direct measurement of the far detector lepton kinematics for any given set of oscillation parameters, which largely removes neutrino interaction modeling uncertainties from T2K oscillation measurements. This naturally provides a direct constraint on the relationship between lepton kinematics and neutrino energy. In addition, nuPRISM is a sensitive probe of sterile neutrino oscillations with multiple energy spectra, which provides unique constraints on possible background-related explanations of the MiniBooNE anomaly. Finally, high-precision measurements of neutrino cross sections on water are possible, including $ν_e$ measurements and the first ever measurements of neutral current interactions as a function of neutrino energy. The nuPRISM detector also benefits the proposed Hyper-Kamiokande project. A demonstration that neutrino interaction uncertainties can be controlled will be important to understanding the physics reach of Hyper-K. In addition, nuPRISM will provide an easily accessible prototype detector for many of the new hardware components currently under consideration for Hyper-K. The following document presents the configuration, physics impact, and preliminary cost estimates for a nuPRISM detector in the J-PARC neutrino beamline. △ Less

Submitted 13 December, 2014; v1 submitted 9 December, 2014; originally announced December 2014.

Comments: 42 pages, 42 figures

Measurement of the muon beam direction and muon flux for the T2K neutrino experiment

Authors: K. Suzuki, S. Aoki, A. Ariga, T. Ariga, F. Bay, C. Bronner, A. Ereditato, M. Friend, M. Hartz, T. Hiraki, A. K. Ichikawa, T. Ishida, T. Ishii, F. Juget, T. Kikawa, T. Kobayashi, H. Kubo, K. Matsuoka, T. Maruyama, A. Minamino, A. Murakami, T. Nakadaira, T. Nakaya, K. Nakayoshi, Y. Oyama , et al. (8 additional authors not shown)

Abstract: The Tokai-to-Kamioka (T2K) neutrino experiment measures neutrino oscillations by using an almost pure muon neutrino beam produced at the J-PARC accelerator facility. The T2K muon monitor was installed to measure the direction and stability of the muon beam which is produced together with the muon neutrino beam. The systematic error in the muon beam direction measurement was estimated, using data a… ▽ More The Tokai-to-Kamioka (T2K) neutrino experiment measures neutrino oscillations by using an almost pure muon neutrino beam produced at the J-PARC accelerator facility. The T2K muon monitor was installed to measure the direction and stability of the muon beam which is produced together with the muon neutrino beam. The systematic error in the muon beam direction measurement was estimated, using data and MC simulation, to be 0.28 mrad. During beam operation, the proton beam has been controlled using measurements from the muon monitor and the direction of the neutrino beam has been tuned to within 0.3 mrad with respect to the designed beam-axis. In order to understand the muon beam properties,measurement of the absolute muon yield at the muon monitor was conducted with an emulsion detector. The number of muon tracks was measured to be $(4.06\pm0.05)\times10^4$ cm$^{-2}$ normalized with $4\times10^{11}$ protons on target with 250 kA horn operation. The result is in agreement with the prediction which is corrected based on hadron production data. △ Less

Submitted 30 November, 2014; originally announced December 2014.

Operational Status and Power Upgrade Prospects of the Neutrino Experimental Facility at J-PARC

Authors: Taku Ishida

Abstract: In order to explore CP asymmetry in the lepton sector, a power upgrade to the neutrino experimental facility at J-PARC is a key requirement for both the Tokai to Kamioka (T2K) long-baseline neutrino oscillation experiment and a future project with Hyper-Kamiokande. Based on five years of operational experience, the facility has achieved stable operation with 230 kW beam power without significant p… ▽ More In order to explore CP asymmetry in the lepton sector, a power upgrade to the neutrino experimental facility at J-PARC is a key requirement for both the Tokai to Kamioka (T2K) long-baseline neutrino oscillation experiment and a future project with Hyper-Kamiokande. Based on five years of operational experience, the facility has achieved stable operation with 230 kW beam power without significant problems on the beam-line apparatus. After successful maintenance works in 2013-2014 to replace all electromagnetic horns and a production target, the facility is now ready to accomodate a 750-kW-rated beam. Also, the possibility of achieving a few to multi-MW beam operation is discussed in detail. △ Less

Submitted 7 March, 2015; v1 submitted 20 November, 2014; originally announced November 2014.

Comments: 4 pages, 8 figures, talk presented at the 2nd international symposium on science at J-PARC (J-PARC 2014), Tsukuba, Ibaraki, Japan on July 2014

Report number: KEK Preprint 2014-34

T2HK: J-PARC upgrade plan for future and beyond T2K

Authors: T. Ishida

Abstract: Upgrades to the J-PARC accelerators and the neutrino experimental facility are of vital importance to the Tokai to Hyper-Kamiokande project (T2HK), which aims to explore CP asymmetry by the $ν_e$ appearance. In this talk I present overview of the T2HK project, current status of the beam operation at J-PARC, and prospect to realize the rated 750 kW operation in coming years. Upgrades to the J-PARC accelerators and the neutrino experimental facility are of vital importance to the Tokai to Hyper-Kamiokande project (T2HK), which aims to explore CP asymmetry by the $ν_e$ appearance. In this talk I present overview of the T2HK project, current status of the beam operation at J-PARC, and prospect to realize the rated 750 kW operation in coming years. △ Less

Submitted 20 November, 2013; originally announced November 2013.

Comments: 4 pages, 2 figures, talk presented at the XVth international workshop on neutrino factories, super beams and beta beams (NUFACT2013), August 19-24, 2013, IHEP Bei**g, China

Report number: KEK Preprint 2013-55

Calibration of the Super-Kamiokande Detector

Authors: K. Abe, Y. Hayato, T. Iida, K. Iyogi, J. Kameda, Y. Kishimoto, Y. Koshio, Ll. Marti, M. Miura, S. Moriyama, M. Nakahata, Y. Nakano, S. Nakayama, Y. Obayashi, H. Sekiya, M. Shiozawa, Y. Suzuki, A. Takeda, Y. Takenaga, H. Tanaka, T. Tomura, K. Ueno, R. A. Wendell, T. Yokozawa, T. J. Irvine , et al. (108 additional authors not shown)

Abstract: Procedures and results on hardware level detector calibration in Super-Kamiokande (SK) are presented in this paper. In particular, we report improvements made in our calibration methods for the experimental phase IV in which new readout electronics have been operating since 2008. The topics are separated into two parts. The first part describes the determination of constants needed to interpret th… ▽ More Procedures and results on hardware level detector calibration in Super-Kamiokande (SK) are presented in this paper. In particular, we report improvements made in our calibration methods for the experimental phase IV in which new readout electronics have been operating since 2008. The topics are separated into two parts. The first part describes the determination of constants needed to interpret the digitized output of our electronics so that we can obtain physical numbers such as photon counts and their arrival times for each photomultiplier tube (PMT). In this context, we developed an in-situ procedure to determine high-voltage settings for PMTs in large detectors like SK, as well as a new method for measuring PMT quantum efficiency and gain in such a detector. The second part describes the modeling of the detector in our Monte Carlo simulation, including in particular the optical properties of its water target and their variability over time. Detailed studies on the water quality are also presented. As a result of this work, we achieved a precision sufficient for physics analysis over a wide energy range (from a few MeV to above a TeV). For example, the charge determination was understood at the 1% level, and the timing resolution was 2.1 nsec at the one-photoelectron charge level and 0.5 nsec at the 100-photoelectron charge level. △ Less

Submitted 20 December, 2013; v1 submitted 29 June, 2013; originally announced July 2013.

Comments: 75 pages, 35 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A 737C (2014), pp. 253-272

Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector

Authors: K. Abe, N. Abgrall, Y. Ajima, H. Aihara, J. B. Albert, C. Andreopoulos, B. Andrieu, M. D. Anerella, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, D. Autiero, A. Badertscher, M. Barbi, G. J. Barker, G. Barr, M. Bass, M. Batkiewicz, F. Bay, S. Bentham, V. Berardi, B. E. Berger , et al. (407 additional authors not shown)

Abstract: Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o… ▽ More Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision. △ Less

Submitted 14 November, 2011; originally announced November 2011.

Comments: 32 pages, 27 figures, submitted to Nucl. Instr. and Meth. A

The T2K Experiment

Authors: T2K Collaboration, K. Abe, N. Abgrall, H. Aihara, Y. Ajima, J. B. Albert, D. Allan, P. -A. Amaudruz, C. Andreopoulos, B. Andrieu, M. D. Anerella, C. Angelsen, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, J. P. A. M. de André, D. Autiero, A. Badertscher, O. Ballester, M. Barbi, G. J. Barker, P. Baron , et al. (499 additional authors not shown)

Abstract: The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross… ▽ More The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem. △ Less

Submitted 8 June, 2011; v1 submitted 6 June, 2011; originally announced June 2011.

Comments: 33 pages, 32 figures, Submitted and accepted by NIM A. Editor: Prof. Chang Kee Jung, Department of Physics and Astronomy, SUNY Stony Brook, [email protected], 631-632-8108 Submit Edited to remove line numbers