-
Coherent synchrotron radiation instability in low-emittance electron storage rings
Authors:
Sara Dastan,
Demin Zhou,
Takuya Ishibashi,
Emanuel Karantzoulis,
Simone Di Mitri,
Ryan Lindberg
Abstract:
Longitudinal impedances at high frequencies, which extend far beyond the width of the beam spectrum, can pose a threat to the performance of modern low-emittance electron storage rings, as they can establish a relatively low threshold for microwave instability. In such rings, coherent synchrotron radiation (CSR) emerges as a prominent contributor to these high-frequency impedances. This paper unde…
▽ More
Longitudinal impedances at high frequencies, which extend far beyond the width of the beam spectrum, can pose a threat to the performance of modern low-emittance electron storage rings, as they can establish a relatively low threshold for microwave instability. In such rings, coherent synchrotron radiation (CSR) emerges as a prominent contributor to these high-frequency impedances. This paper undertakes a systematic investigation into the effects of CSR on electron rings, utilizing Elettra 2.0, a ring of fourth-generation light sources, and the SuperKEKB low-energy ring, a ring of $e^+e^-$ circular colliders, as illustrative examples. Our work revisits theories of microwave instability driven by CSR impedance, extending the analysis to encompass other high-frequency impedances such as resistive wall and coherent wiggler radiation. Through instability analysis and numerical simulations conducted on the two aforementioned rings, the study explored the impact of high-frequency impedances and their interactions with broadband impedances from discontinuities in vacuum chambers.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
Potential-well bunch lengthening in electron storage rings
Authors:
Demin Zhou,
Gaku Mitsuka,
Takuya Ishibashi,
Karl Bane
Abstract:
The cubic equation derived by B. Zotter has been popularly used for electron storage rings to describe the scaling law of potential-well bunch lengthening. This equation has also often been used to calculate the effective impedance when the bunch lengthening is measured or simulated. This paper discusses the validity of Zotter's equation and presents an alternative but self-consistent equation for…
▽ More
The cubic equation derived by B. Zotter has been popularly used for electron storage rings to describe the scaling law of potential-well bunch lengthening. This equation has also often been used to calculate the effective impedance when the bunch lengthening is measured or simulated. This paper discusses the validity of Zotter's equation and presents an alternative but self-consistent equation for potential-well bunch lengthening. Its applications to predicting bunch lengthening and extracting effective impedance from bunch length measurements are also addressed.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Theories derived from Haissinski equation and their applications to electron storage rings
Authors:
Demin Zhou,
Takuya Ishibashi,
Gaku Mitsuka,
Makoto Tobiyama,
Karl Bane,
Linhao Zhang
Abstract:
As a stationary solution of the Vlasov-Fokker-Planck equation, the Haissinski equation predicts the equilibrium line density of a bunch that circulates in a storage ring for a given wake function. This paper shows that some equations regarding the centroid shift of the bunch, the peak position of the bunch profile, bunch length, and extraction of impedance from the bunch profile can be derived fro…
▽ More
As a stationary solution of the Vlasov-Fokker-Planck equation, the Haissinski equation predicts the equilibrium line density of a bunch that circulates in a storage ring for a given wake function. This paper shows that some equations regarding the centroid shift of the bunch, the peak position of the bunch profile, bunch length, and extraction of impedance from the bunch profile can be derived from the Haissinski equation in a self-consistent manner. In particular, a generalized quadratic equation for potential-well bunch lengthening is obtained to accommodate any absolute impedance model, expanding upon Zotter's cubic equation, which is primarily applicable to inductive impedance. The equations derived in this paper are tested using computed impedance models for some electron storage rings, showing machine-dependent properties of impedance effects. We conclude that these equations can be employed in electron storage rings to effectively bridge the gap between impedance computations and beam-based measurements.
△ Less
Submitted 20 December, 2023; v1 submitted 3 July, 2023;
originally announced July 2023.
-
Measured and projected beam backgrounds in the Belle II experiment at the SuperKEKB collider
Authors:
A. Natochii,
T. E. Browder,
L. Cao,
G. Cautero,
S. Dreyer,
A. Frey,
A. Gabrielli,
D. Giuressi,
T. Ishibashi,
Y. **,
K. Kojima,
T. Kraetzschmar,
L. Lanceri,
Z. Liptak,
D. Liventsev,
C. Marinas,
L. Massaccesi,
K. Matsuoka,
F. Meier,
C. Miller,
H. Nakayama,
C. Niebuhr,
A. Novosel,
K. Parham,
I. Popov
, et al. (21 additional authors not shown)
Abstract:
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak l…
▽ More
The Belle II experiment at the SuperKEKB electron-positron collider aims to collect an unprecedented data set of $50~{\rm ab}^{-1}$ to study $CP$-violation in the $B$-meson system and to search for Physics beyond the Standard Model. SuperKEKB is already the world's highest-luminosity collider. In order to collect the planned data set within approximately one decade, the target is to reach a peak luminosity of $\rm 6 \times 10^{35}~cm^{-2}s^{-1}$ by further increasing the beam currents and reducing the beam size at the interaction point by squeezing the betatron function down to $β^{*}_{\rm y}=\rm 0.3~mm$. To ensure detector longevity and maintain good reconstruction performance, beam backgrounds must remain well controlled. We report on current background rates in Belle II and compare these against simulation. We find that a number of recent refinements have significantly improved the background simulation accuracy. Finally, we estimate the safety margins going forward. We predict that backgrounds should remain high but acceptable until a luminosity of at least $\rm 2.8 \times 10^{35}~cm^{-2}s^{-1}$ is reached for $β^{*}_{\rm y}=\rm 0.6~mm$. At this point, the most vulnerable Belle II detectors, the Time-of-Propagation (TOP) particle identification system and the Central Drift Chamber (CDC), have predicted background hit rates from single-beam and luminosity backgrounds that add up to approximately half of the maximum acceptable rates.
△ Less
Submitted 11 December, 2023; v1 submitted 3 February, 2023;
originally announced February 2023.
-
Direct Observation and Quantitative Measurement of OH Radical Desorption During the Ultraviolet Photolysis of Liquid Nonanoic Acid
Authors:
Naoki Numadate,
Shota Saito,
Yuki Nojima,
Taka-aki Ishibashi,
Shinichi Enami,
Tetsuya Hama
Abstract:
Ultraviolet (UV) photolysis of fatty acid surfactants which cover the surfaces of atmospheric liquid aerosols and are found in the oceans such as nonanoic acid (NA) has recently been suggested as a source of hydroxyl (OH) radicals in the troposphere. We used laser-induced fluorescence to directly observe OH radicals desorbed from the surface of neat liquid NA as a primary photoproduct following 21…
▽ More
Ultraviolet (UV) photolysis of fatty acid surfactants which cover the surfaces of atmospheric liquid aerosols and are found in the oceans such as nonanoic acid (NA) has recently been suggested as a source of hydroxyl (OH) radicals in the troposphere. We used laser-induced fluorescence to directly observe OH radicals desorbed from the surface of neat liquid NA as a primary photoproduct following 213 nm irradiation. The upper limit of photoreaction cross section for the OH radical desorption was estimated to be 9.0(4.1) $\times$ 10$^{-22}$ cm$^2$, which is only 1.2$\pm$0.8% of the photoreaction cross section established for the photolysis of gas-phase acetic acid monomers. Vibrational sum-frequency generation spectroscopy for liquid NA revealed the hydrogen-bonded, cyclic, dimer structure of the NA molecules at the liquid surface. This dimerization can inhibit the formation of OH radicals and lead the present low photochemical reactivity of liquid NA.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Japan's Strategy for Future Projects in High Energy Physics
Authors:
M. Endo,
K. Hamaguchi,
M. Ibe,
T. Ishibashi,
A. Ishikawa,
M. Ishino,
M. Ishitsuka,
S. Kanemura,
M. Kuriki,
T. Mori,
S. Moriyama,
H. Nanjo,
W. Ootani,
Y. Sato
Abstract:
The current strategy for future projects of the Japanese high energy physics community, Japan Association of High Energy Physicists (JAHEP), remains as described in the Final Report of the Committee on Future Projects in High Energy Physics, published in 2017. The Recommendation part of the Final Report is excerpted in the following page. This document updates the Final Report by adding developmen…
▽ More
The current strategy for future projects of the Japanese high energy physics community, Japan Association of High Energy Physicists (JAHEP), remains as described in the Final Report of the Committee on Future Projects in High Energy Physics, published in 2017. The Recommendation part of the Final Report is excerpted in the following page. This document updates the Final Report by adding developments and advances that have occurred since 2017.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Measurements of Beam Backgrounds in SuperKEKB Phase 2
Authors:
Zachary J. Liptak,
Antonio Paladino,
Luka Santelj,
Jeffery Schueler,
Slavomira Stefkova,
Hikaru Tanigawa,
Noritsugu Tsuzuki,
Alberto Aloisio,
Patrick Ahlburg,
Philip Bambade,
Giovanni Bassi,
Matthew Barrett,
Jerome Baudot,
Thomas Browder,
Giulia Casarosa,
Giuseppe Cautero,
David Cinabro,
Gilles Claus,
Daniel Cuesta,
Francesco Di Capua,
Salvatore Di Carlo,
John Flanagan,
Ariane Frey,
Bryan Fulsom,
Yoshihiro Funakoshi
, et al. (44 additional authors not shown)
Abstract:
The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgro\ unds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle~II experi\ ment. We report on the first background measurements performed after roll-in of the Belle II detector, a period known as SuperKE\ KB Phase 2…
▽ More
The high design luminosity of the SuperKEKB electron-positron collider will result in challenging levels of beam-induced backgro\ unds in the interaction region. Understanding and mitigating these backgrounds is critical to the success of the Belle~II experi\ ment. We report on the first background measurements performed after roll-in of the Belle II detector, a period known as SuperKE\ KB Phase 2, utilizing both the BEAST II system of dedicated background detectors and the Belle II detector itself. We also repor\ t on first revisions to the background simulation made in response to our findings. Backgrounds measured include contributions f\ rom synchrotron radiation, beam-gas, Touschek, and injection backgrounds. At the end of Phase 2, single-beam backgrounds origina\ ting from the 4 GeV positron Low Energy Ring (LER) agree reasonably well with simulation, while backgrounds from the 7 GeV elect\ ron High Energy Ring (HER) are approximately one order of magnitude higher than simulation. We extrapolate these backgrounds for\ ward and conclude it is safe to install the Belle II vertex detector.
△ Less
Submitted 29 December, 2021;
originally announced December 2021.
-
Improved simulation of beam backgrounds and collimation at SuperKEKB
Authors:
A. Natochii,
S. E. Vahsen,
H. Nakayama,
T. Ishibashi,
S. Terui
Abstract:
Mitigation of beam backgrounds via collimators is critical for the success of the Belle~II experiment at the SuperKEKB electron-positron collider. We report on an improved simulation methodology, which includes a refined physical description of the collimators and beam pipe, our first implementation of collimator tip scattering, and in which the existing beam particle tracking software has been em…
▽ More
Mitigation of beam backgrounds via collimators is critical for the success of the Belle~II experiment at the SuperKEKB electron-positron collider. We report on an improved simulation methodology, which includes a refined physical description of the collimators and beam pipe, our first implementation of collimator tip scattering, and in which the existing beam particle tracking software has been embedded into a new sequential tracking framework. These improvements resolve longstanding discrepancies between measured and predicted Belle~II background levels, and significantly reduce the computing time required to optimize the collimation system in simulation. Finally, we report on collimator aperture scans, which confirm the accuracy of the simulation and suggest a new method for aligning the collimators.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
First Measurements of Beam Backgrounds at SuperKEKB
Authors:
P. M. Lewis,
I. Jaegle,
H. Nakayama,
A. Aloisio,
F. Ameli,
M. Barrett,
A. Beaulieu,
L. Bosisio,
P. Branchini,
T. E. Browder,
A. Budano,
G. Cautero,
C. Cecchi,
Y. -T. Chen,
K. -N. Chu,
D. Cinabro,
P. Cristaudo,
S. de Jong,
R. de Sangro,
G. Finocchiaro,
J. Flanagan,
Y. Funakoshi,
M. Gabriel,
R. Giordano,
D. Giuressi
, et al. (45 additional authors not shown)
Abstract:
The high design luminosity of the SuperKEKB electron-positron collider is expected to result in challenging levels of beam-induced backgrounds in the interaction region. Properly simulating and mitigating these backgrounds is critical to the success of the Belle~II experiment. We report on measurements performed with a suite of dedicated beam background detectors, collectively known as BEAST II, d…
▽ More
The high design luminosity of the SuperKEKB electron-positron collider is expected to result in challenging levels of beam-induced backgrounds in the interaction region. Properly simulating and mitigating these backgrounds is critical to the success of the Belle~II experiment. We report on measurements performed with a suite of dedicated beam background detectors, collectively known as BEAST II, during the so-called Phase 1 commissioning run of SuperKEKB in 2016, which involved operation of both the high energy ring (HER) of 7 GeV electrons as well as the low energy ring (LER) of 4 GeV positrons. We describe the BEAST II detector systems, the simulation of beam backgrounds, and the measurements performed. The measurements include standard ones of dose rates versus accelerator conditions, and more novel investigations, such as bunch-by-bunch measurements of injection backgrounds and measurements sensitive to the energy spectrum and angular distribution of fast neutrons. We observe beam-gas, Touschek, beam-dust, and injection backgrounds. We do not observe significant synchrotron radiation, as expected. Measured LER beam-gas backgrounds and Touschek backgrounds in both rings are slightly elevated, on average three times larger than the levels predicted by simulation. HER beam-gas backgrounds are on on average two orders of magnitude larger than predicted. Systematic uncertainties and channel-to-channel variations are large, so that these excesses constitute only 1-2 sigma level effects. Neutron background rates are higher than predicted and should be studied further. We will measure the remaining beam background processes, due to colliding beams, in the imminent commissioning Phase 2. These backgrounds are expected to be the most critical for Belle II, to the point of necessitating replacement of detector components during the Phase 3 (full-luminosity) operation of SuperKEB.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Digital-photonic synthesis of ultra-low noise tunable signals from RF to 100 GHz
Authors:
T. M. Fortier,
A. Rolland,
F. Quinlan,
F. N. Baynes,
A. J. Metcalf,
A. Hati,
A. Ludlow,
N. Hinkley,
M. Shimizu,
T. Ishibashi,
J. C. Campbell,
S. A. Diddams
Abstract:
The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telec…
▽ More
The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telecommunications, high precision measurement, and radar and sensing. Here we describe a digital-photonic synthesizer (DPS) based on optical frequency division that enables the generation of widely tunable signals from near DC to 100 GHz with a fractional frequency instability of 1 part in 10^15. The spectral purity of the DPS derived signals represents an improvement in close-to-carrier noise performance over the current state-of-the-art of nearly 7 orders of magnitude in the W-band (100 GHz), and up to 5 orders of magnitude in the X-band (10 GHz).
△ Less
Submitted 10 June, 2015;
originally announced June 2015.
-
Investigation into electron cloud effects in the International Linear Collider positron dam** ring
Authors:
James A. Crittenden,
Joe Conway,
Gerald F. Dugan,
Mark A. Palmer,
David L. Rubin,
James Shanks,
Kiran G. Sonnad,
Laura Boon,
Katherine Harkay,
Takuya Ishibashi,
Miguel A. Furman,
Susanna Guiducci,
Mauro T. F. Pivi,
Lanfa Wang
Abstract:
We report modeling results for electron cloud buildup and instability in the International Linear Collider positron dam** ring. Updated optics, wiggler magnets, and vacuum chamber designs have recently been developed for the 5 GeV, 3.2-km racetrack layout. An analysis of the synchrotron radiation profile around the ring has been performed, including the effects of diffuse and specular photon sca…
▽ More
We report modeling results for electron cloud buildup and instability in the International Linear Collider positron dam** ring. Updated optics, wiggler magnets, and vacuum chamber designs have recently been developed for the 5 GeV, 3.2-km racetrack layout. An analysis of the synchrotron radiation profile around the ring has been performed, including the effects of diffuse and specular photon scattering on the interior surfaces of the vacuum chamber. The results provide input to the cloud buildup simulations for the various magnetic field regions of the ring. The modeled cloud densities thus obtained are used in the instability threshold calculations. We conclude that the mitigation techniques employed in this model will suffice to allow operation of the dam** ring at the design operational specifications.
△ Less
Submitted 24 March, 2014; v1 submitted 12 November, 2013;
originally announced November 2013.
