Showing 1–29 of 29 results for author: Ideguchi, T

Label-free mid-infrared photothermal microscopy revisits intracellular thermal dynamics: what do fluorescent nanothermometers measure?

Authors: Keiichiro Toda, Masaharu Takarada, Genki Ishigane, Hiroyuki Shimada, Venkata Ramaiah Badarla, Kohki Okabe, Takuro Ideguchi

Abstract: Fluorescent nanothermometry has revealed pronounced inhomogeneous temperature distributions within cells and has opened the field of single-cell thermal biology. However, this finding has sparked a controversial discussion known as the 10^5 gap issue, which arises from a simple heat conduction calculation suggesting such large temperature distributions should not exist inside cells. This debate ha… ▽ More Fluorescent nanothermometry has revealed pronounced inhomogeneous temperature distributions within cells and has opened the field of single-cell thermal biology. However, this finding has sparked a controversial discussion known as the 10^5 gap issue, which arises from a simple heat conduction calculation suggesting such large temperature distributions should not exist inside cells. This debate has led to a hypothesis that intracellular thermal conduction is considerably slower than in water. Although various efforts have been made to measure intracellular thermal conduction, there are significant variations in the reported values. Here, we address this issue using label-free mid-infrared photothermal microscopy, which enables us to measure heat-induced temperature variations under local thermal equilibrium via refractive index changes. We measured intracellular thermal diffusivity via transient thermal decay and found that thermal diffusivity within living cells is 93-94% of water in the cytoplasm and nucleus. This result suggests that intracellular thermal conduction cannot explain the 10^5 gap issue. To investigate this issue further, we compared fluorescent nanothermometry with our label-free thermometry by measuring heat-induced temperature variations in living cells. This experiment revealed intriguing results where the fluorescent nanothermometry showed a slowly varying unexpected signal in addition to a constant temperature change. This result indicates that fluorescent nanothermometers are sensitive to additional factors on top of the temperature variation under local thermal equilibrium, raising an open question of what fluorescent nanothermometry measures. △ Less

Submitted 23 June, 2024; originally announced June 2024.

Mid-infrared optical coherence tomography with MHz axial line rate for real-time non-destructive testing

Authors: Satoko Yagi, Takuma Nakamura, Kazuki Hashimoto, Shotaro Kawano, Takuro Ideguchi

Abstract: Non-destructive testing (NDT) is crucial for ensuring product quality and safety across various industries. Conventional methods such as ultrasonic, terahertz, and X-ray imaging have limitations in terms of probe-contact requirement, depth resolution, or radiation risks. Optical coherence tomography (OCT) is a promising alternative to solve these limitations, but it suffers from strong scattering,… ▽ More Non-destructive testing (NDT) is crucial for ensuring product quality and safety across various industries. Conventional methods such as ultrasonic, terahertz, and X-ray imaging have limitations in terms of probe-contact requirement, depth resolution, or radiation risks. Optical coherence tomography (OCT) is a promising alternative to solve these limitations, but it suffers from strong scattering, limiting its penetration depth. Recently, OCT in the mid-infrared (MIR) spectral region has attracted attention with a significantly lower scattering rate than in the near-infrared region. However, the highest reported A-scan rate of MIR-OCT has been 3 kHz, which requires long data acquisition time to take an image, unsatisfying industrial demands for real-time diagnosis. Here, we present a high-speed MIR-OCT system operating in the 3-4 um region that employs the swept-source OCT technique based on time-stretch infrared spectroscopy. By integrating a broadband femtosecond MIR pulsed laser operating at a repetition rate of 50 MHz, we achieved an A-scan rate of 1 MHz with an axial resolution of 11.6 um and a sensitivity of 55 dB. As a proof-of-concept demonstration, we imaged the surface of substrates covered by highly scattering paint coatings. The demonstrated A-scan rate surpasses previous state-of-the-art by more than two orders of magnitude, paving the way for real-time NDT of industrial products, cultural assets, and structures. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Mid-infrared wide-field nanoscopy

Authors: Miu Tamamitsu, Keiichiro Toda, Venkata Ramaiah Badarla, Hiroyuki Shimada, Kuniaki Konishi, Takuro Ideguchi

Abstract: Mid-infrared (MIR) spectroscopy is widely recognized as a powerful, non-distractive method for chemical analysis. However, its utility is constrained by a micrometer-scale spatial resolution imposed by the long-wavelength MIR diffraction limit. This limitation has been recently overcome by MIR photothermal (MIP) imaging, which detects photothermal effects induced in the vicinity of MIR absorbers u… ▽ More Mid-infrared (MIR) spectroscopy is widely recognized as a powerful, non-distractive method for chemical analysis. However, its utility is constrained by a micrometer-scale spatial resolution imposed by the long-wavelength MIR diffraction limit. This limitation has been recently overcome by MIR photothermal (MIP) imaging, which detects photothermal effects induced in the vicinity of MIR absorbers using a visible-light microscope. Despite its promise, the full potential of its spatial resolving power has not been realized. Here, we present an optimal implementation of wide-field MIP imaging to achieve high spatial resolution. This is accomplished by employing single-objective synthetic-aperture quantitative phase imaging (SOSA-QPI) with synchronized sub-nanosecond MIR and visible light sources, effectively suppressing the resolution-degradation effect caused by photothermal heat diffusion. We demonstrate far-field MIR spectroscopic imaging with a spatial resolution limited by the visible diffraction, down to 125 nm, in the MIR region of 3.12-3.85 um (2,600-3,200 cm-1). This technique, through the use of a shorter visible wavelength and/or a higher objective numerical aperture, holds the potential to achieve a spatial resolution of less than 100 nm, thus paving the way for MIR wide-field nanoscopy. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Quantitative phase retrieval for Zernike phase-contrast microscopy

Authors: Rikimaru Kurata, Keiichiro Toda, Genki Ishigane, Makoto Naruse, Ryoichi Horisaki, Takuro Ideguchi

Abstract: We present a single-image numerical phase retrieval method for Zernike phase-contrast microscopy (ZPM) that addresses halo and shade-off artifacts, as well as the weak phase condition, without requiring hardware modifications. By employing a rigorous physical model of ZPM and a gradient descent algorithm for its inversion, we achieve quantitative ZPM imaging. Our approach is experimentally validat… ▽ More We present a single-image numerical phase retrieval method for Zernike phase-contrast microscopy (ZPM) that addresses halo and shade-off artifacts, as well as the weak phase condition, without requiring hardware modifications. By employing a rigorous physical model of ZPM and a gradient descent algorithm for its inversion, we achieve quantitative ZPM imaging. Our approach is experimentally validated using biological cells and its quantitative nature is confirmed through comparisons with digital holography observations. △ Less

Submitted 8 May, 2023; originally announced May 2023.

Broadband coherent Raman scattering spectroscopy at 50,000,000 spectra/s

Authors: Takuma Nakamura, Kazuki Hashimoto, Takuro Ideguchi

Abstract: Raman scattering spectroscopy is widely used as an analytical technique in various fields, but its measurement process tends to be slow due to the low scattering cross-section. In the last decade, various broadband coherent Raman scattering spectroscopy techniques have been developed to address this limitation, achieving a measurement rate of about 100 kSpectra/s. Here, we present a significantly… ▽ More Raman scattering spectroscopy is widely used as an analytical technique in various fields, but its measurement process tends to be slow due to the low scattering cross-section. In the last decade, various broadband coherent Raman scattering spectroscopy techniques have been developed to address this limitation, achieving a measurement rate of about 100 kSpectra/s. Here, we present a significantly increased measurement rate of 50 MSpectra/s, which is 500 times higher than the previous state-of-the-art, by develo** time-stretch coherent Raman scattering spectroscopy. Our newly-developed system, based on a mode-locked Yb fiber laser, enables highly-efficient broadband excitation of molecular vibrations via impulsive stimulated Raman scattering with an ultrashort femtosecond pulse and sensitive time-stretch detection with a picosecond probe pulse at a high repetition rate of the laser. As a proof-of-concept demonstration, we measure broadband coherent Stokes Raman scattering spectra of organic compounds covering the molecular fingerprint region from 200 to 1,200 cm-1. This high-speed broadband vibrational spectroscopy technique holds promise for unprecedented measurements of sub-microsecond dynamics of irreversible phenomena and extremely high-throughput measurements. △ Less

Submitted 8 May, 2023; v1 submitted 21 April, 2023; originally announced April 2023.

Upconversion time-stretch infrared spectroscopy

Authors: Kazuki Hashimoto, Takuma Nakamura, Takahiro Kageyama, Venkata Ramaiah Badarla, Hiroyuki Shimada, Ryoich Horisaki, Takuro Ideguchi

Abstract: High-speed measurement confronts the extreme speed limit when the signal becomes comparable to the noise level. In the context of broadband mid-infrared spectroscopy, state-of-the-art ultrafast Fourier-transform infrared spectrometers, in particular dual-comb spectrometers, have improved the measurement rate up to a few Mspectra/s, which is limited by the signal-to-noise ratio. Time-stretch infrar… ▽ More High-speed measurement confronts the extreme speed limit when the signal becomes comparable to the noise level. In the context of broadband mid-infrared spectroscopy, state-of-the-art ultrafast Fourier-transform infrared spectrometers, in particular dual-comb spectrometers, have improved the measurement rate up to a few Mspectra/s, which is limited by the signal-to-noise ratio. Time-stretch infrared spectroscopy, an emerging ultrafast frequency-swept mid-infrared spectroscopy technique, has shown a record-high rate of 80 Mspectra/s with an intrinsically higher signal-to-noise ratio than Fourier-transform spectroscopy by more than the square-root of the number of spectral elements. However, it can measure no more than ~30 spectral elements with a low resolution of several cm-1. Here, we significantly increase the measurable number of spectral elements to more than 1,000 by incorporating a nonlinear upconversion process. The one-to-one map** of a broadband spectrum from the mid-infrared to the near-infrared telecommunication region enables low-loss time-stretching with a single-mode optical fiber and low-noise signal detection with a high-bandwidth photoreceiver. We demonstrate high-resolution mid-infrared spectroscopy of gas-phase methane molecules with a high resolution of 0.017 cm-1. This unprecedentedly high-speed vibrational spectroscopy technique would satisfy various unmet needs in experimental molecular science, e.g., measuring ultrafast dynamics of irreversible phenomena, statistically analyzing a large amount of heterogeneous spectral data, or taking broadband hyperspectral images at a high frame rate. △ Less

Submitted 25 September, 2022; originally announced September 2022.

Mid-infrared photothermal single-live-cell imaging beyond video rate

Authors: Genki Ishigane, Keiichiro Toda, Miu Tamamitsu, Hiroyuki Shimada, Venkata Ramaiah Badarla, Takuro Ideguchi

Abstract: Advancement in mid-infrared (MIR) technology has led to promising biomedical applications of MIR spectroscopy, such as liquid biopsy or breath diagnosis. On the contrary, MIR microscopy has been rarely used for live biological samples in an aqueous environment due to the lack of spatial resolution and the large water absorption background. Recently, mid-infrared photothermal (MIP) imaging has prov… ▽ More Advancement in mid-infrared (MIR) technology has led to promising biomedical applications of MIR spectroscopy, such as liquid biopsy or breath diagnosis. On the contrary, MIR microscopy has been rarely used for live biological samples in an aqueous environment due to the lack of spatial resolution and the large water absorption background. Recently, mid-infrared photothermal (MIP) imaging has proven to be applicable to 2D and 3D single-cell imaging with high spatial resolution inherited from visible light. However, the maximum measurement rate has been limited to several frames/s, limiting its range of use. Here, we develop a significantly-improved wide-field MIP quantitative phase microscope with two orders-of-magnitude higher signal-to-noise ratio than previous MIP imaging techniques and demonstrate single-live-cell imaging beyond video rate. We first derive optimal system design by numerically simulating thermal conduction following the photothermal effect. Then, we develop the designed system with a homemade nanosecond MIR optical parametric oscillator and a high full-well-capacity image sensor. Our high-speed and high-spatial-resolution MIR microscope has great potential to become a new tool for life science, in particular for single-live-cell analysis. △ Less

Submitted 25 August, 2022; originally announced August 2022.

A simple approach of broadband mid-infrared pulse generation with a mode-locked Yb-doped fiber laser

Authors: Takuma Nakamura, Venkata Ramaiah Badarla, Kazuki Hashimoto, Peter G. Schunemann, Takuro Ideguchi

Abstract: Broadband mid-infrared (MIR) molecular spectroscopy demands a bright and broadband light source in the molecular fingerprint region. To this end, intra-pulse difference frequency generation (IDFG) has shown excellent properties among various techniques. However, previous IDFG systems have mainly used unconventional long-wavelength 2-$μ$m ultrashort pulsed lasers. A few systems have been demonstrat… ▽ More Broadband mid-infrared (MIR) molecular spectroscopy demands a bright and broadband light source in the molecular fingerprint region. To this end, intra-pulse difference frequency generation (IDFG) has shown excellent properties among various techniques. However, previous IDFG systems have mainly used unconventional long-wavelength 2-$μ$m ultrashort pulsed lasers. A few systems have been demonstrated with 1-$μ$m lasers, but they use bulky 100-W-class high-power Yb thin-disk lasers. In this work, we demonstrate a simple and robust approach of 1-$μ$m-pumped broadband IDFG with a conventional mode-locked Yb-doped fiber laser. We first generate 3.3-W, 12.1-fs ultrashort pulses at 50 MHz by a simple combination of spectral broadening with a short single-mode fiber and pulse compression with chirped mirrors. Then, we use them for pum** a thin orientation-patterned gallium phosphide (OP-GaP) crystal, generating 1.2-mW broadband MIR pulses with the -20-dB bandwidth of 480 cm$^{-1}$ in the fingerprint region (760-1240 cm$^{-1}$, 8.1-13.1 $μ$m). The 1-$μ$m-based IDFG system allows for simultaneous generation of ultrashort pulses in the ultraviolet and visible regions, enabling, for example, 100-MHz-level high-repetition-rate vibrational sum-frequency generation spectroscopy or pump-probe spectroscopy. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Broadband complementary vibrational spectroscopy with cascaded intra-pulse difference frequency generation

Authors: Kazuki Hashimoto, Venkata Ramaiah Badarla, Takayuki Imamura, Takuro Ideguchi

Abstract: One of the essential goals of molecular spectroscopy is to measure all fundamental molecular vibrations simultaneously. To this end, one needs to measure broadband infrared (IR) absorption and Raman scattering spectra, which provide complementary vibrational information. A recently demonstrated technique called complementary vibrational spectroscopy (CVS) enables simultaneous measurements of IR an… ▽ More One of the essential goals of molecular spectroscopy is to measure all fundamental molecular vibrations simultaneously. To this end, one needs to measure broadband infrared (IR) absorption and Raman scattering spectra, which provide complementary vibrational information. A recently demonstrated technique called complementary vibrational spectroscopy (CVS) enables simultaneous measurements of IR and Raman spectra with a single device based on a single laser source. However, the spectral coverage was limited to ~1000 cm-1, which partially covers the spectral regions of the fundamental vibrations. In this work, we demonstrate a simple method to expand the spectral bandwidth of the CVS with a cascaded intra-pulse difference-frequency generation (IDFG). Using the system, we measure broadband CVS spectra of organic liquids spanning over 2000 cm-1, more than double the previous study. △ Less

Submitted 23 September, 2021; originally announced September 2021.

High-speed Fourier-transform infrared spectroscopy with phase-controlled delay line

Authors: Kazuki Hashimoto, Venkata Ramaiah Badarla, Takuro Ideguchi

Abstract: Fourier-transform infrared spectroscopy (FTIR) is the golden standard of mid-infrared (MIR) molecular spectroscopic analysis through optically-encoded vibrational signatures. Michelson-type FTIR and MIR dual-comb spectrometers allow us to simultaneously investigate multiple molecular species via the broadband and high-resolution spectroscopic capabilities. However, these are not applicable to high… ▽ More Fourier-transform infrared spectroscopy (FTIR) is the golden standard of mid-infrared (MIR) molecular spectroscopic analysis through optically-encoded vibrational signatures. Michelson-type FTIR and MIR dual-comb spectrometers allow us to simultaneously investigate multiple molecular species via the broadband and high-resolution spectroscopic capabilities. However, these are not applicable to high-speed measurements due to the low temporal resolution which is fundamentally limited by the signal-to-noise ratio (SNR). In this study, we develop a high-speed FTIR spectroscopy technique called phase-controlled Fourier-transform infrared spectroscopy (PC-FTIR) that has the capability to measure MIR absorption spectra at a rate of above 10 kHz. PC-FTIR demonstrates the high scan rate with a high SNR for various spectral bandwidths by arbitrarily adjusting the instrumental spectral resolution. As a proof of principle demonstration, we measure high-speed mixing dynamics of two liquids at a rate of 24 kHz. We also measure MIR spectra of gas-phase molecules with higher spectral resolution at a rate of 12 kHz. This high-speed MIR spectrometer could be especially useful for measuring non-repetitive fast phenomena and acquiring a large amount spectral data within a short time. △ Less

Submitted 30 August, 2020; originally announced August 2020.

Compressive dual-comb spectroscopy

Authors: Akira Kawai, Takahiro Kageyama, Ryoichi Horisaki, Takuro Ideguchi

Abstract: Broadband, high resolution and rapid measurement of dual-comb spectroscopy (DCS) generates a large amount of data stream. We numerically demonstrate significant data compression of DCS spectra by using a compressive sensing technique. Our numerical simulation shows a compression rate of more than 100 with 3% error in mole fraction estimation of mid-infrared (MIR) DCS of two molecular species in a… ▽ More Broadband, high resolution and rapid measurement of dual-comb spectroscopy (DCS) generates a large amount of data stream. We numerically demonstrate significant data compression of DCS spectra by using a compressive sensing technique. Our numerical simulation shows a compression rate of more than 100 with 3% error in mole fraction estimation of mid-infrared (MIR) DCS of two molecular species in a broadband (~30 THz) and high resolution (~115 MHz) condition. We also numerically demonstrate a massively parallel MIR DCS spectrum of 10 different molecular species can be reconstructed with a compression rate of 10.5 with a transmittance error of 0.003 from the original spectrum. △ Less

Submitted 14 February, 2021; v1 submitted 2 July, 2020; originally announced July 2020.

A multimodal laser-scanning nonlinear optical microscope with a rapid broadband Fourier-transform coherent Raman modality

Authors: Faris Sinjab, Kazuki Hashimoto, Venktata Ramaiah Badarla, Junko Omachi, Takuro Ideguchi

Abstract: Nonlinear optical microscopy allows rapid high-resolution microscopy with image contrast generated from intrinsic properties of the sample. Established modalities such as multiphoton excited fluorescence and second/third-harmonic generation can be combined with other nonlinear techniques, such as coherent Raman spectroscopy which typically allow chemical imaging of a single resonant vibrational mo… ▽ More Nonlinear optical microscopy allows rapid high-resolution microscopy with image contrast generated from intrinsic properties of the sample. Established modalities such as multiphoton excited fluorescence and second/third-harmonic generation can be combined with other nonlinear techniques, such as coherent Raman spectroscopy which typically allow chemical imaging of a single resonant vibrational mode of a sample. Here, we utilize a single ultrafast laser source to obtain broadband coherent Raman spectra on a microscope, together with other nonlinear microscopy approaches on the same instrument. We demonstrate that the coherent Raman modality allows broadband measurement (>1000 cm-1), with high spectral resolution (<5 cm-1), with a rapid spectral acquisition rate (3-12 kHz). This enables Raman hyperspectral imaging of > kilo-pixel images at >11 frames per second. △ Less

Submitted 28 May, 2020; originally announced May 2020.

Adaptive dynamic range shift (ADRIFT) quantitative phase imaging

Authors: Keiichiro Toda, Miu Tamamitsu, Takuro Ideguchi

Abstract: Quantitative phase imaging (QPI) is often used for label-free single cell analysis with its high-contrast images of optical phase delay (OPD) map. Contrary to other imaging methods, sensitivity improvement has not been intensively explored because conventional QPI is sensitive enough to see surface roughness of a substrate which anyway restricts the measurable minimum OPD. However, emerging QPI te… ▽ More Quantitative phase imaging (QPI) is often used for label-free single cell analysis with its high-contrast images of optical phase delay (OPD) map. Contrary to other imaging methods, sensitivity improvement has not been intensively explored because conventional QPI is sensitive enough to see surface roughness of a substrate which anyway restricts the measurable minimum OPD. However, emerging QPI techniques which utilize, for example, differential image analysis of consecutive temporal frames, such as mid-infrared photothermal QPI, mitigate the minimum OPD limit by decoupling the static OPD contribution and allow to measure much smaller OPD. Here, we propose and demonstrate super-sensitive QPI with expanded dynamic range. It is enabled by adaptive dynamic range shift with combination of wavefront sha** and dark-field QPI techniques. As a proof-of-concept demonstration, we show dynamic range expansion (sensitivity improvement) of QPI by a factor of 6.6 and its utility for improving sensitivity of mid-infrared photothermal QPI. This technique can also be applied for wide-field scattering imaging of dynamically changing nanoscale objects inside and outside a biological cell without losing global cellular morphological image information. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Enhanced spectral resolution for broadband coherent anti-Stokes Raman spectroscopy

Authors: Faris Sinjab, Kazuki Hashimoto, Xuanqiang Zhao, Yu Nagashima, Takuro Ideguchi

Abstract: The spectral resolution of broadband Fourier-transform coherent anti-Stokes Raman spectroscopy is limited by the maximum optical path length difference that can be scanned within a short time in an interferometer. However, alternatives to the Fourier-transform exist which can bypass this limitation with certain assumptions. We apply one such approach to broadband coherent Raman spectroscopy using… ▽ More The spectral resolution of broadband Fourier-transform coherent anti-Stokes Raman spectroscopy is limited by the maximum optical path length difference that can be scanned within a short time in an interferometer. However, alternatives to the Fourier-transform exist which can bypass this limitation with certain assumptions. We apply one such approach to broadband coherent Raman spectroscopy using interferometers with short delay line (low Fourier spectral resolution) and large delay line (high Fourier spectral resolution). With this method, we demonstrate broadband coherent Raman spectroscopy of closely spaced vibrational bands is possible using a short delay line interferometer, with superior spectral resolution to the longer delay line instrument. We discuss how this approach may be particularly useful for more complex Raman spectra, such as those measured from biological samples. △ Less

Submitted 17 January, 2020; originally announced January 2020.

Label-free biochemical quantitative phase imaging with mid-infrared photothermal effect

Authors: Miu Tamamitsu, Keiichiro Toda, Hiroyuki Shimada, Takaaki Honda, Masaharu Takarada, Kohki Okabe, Yu Nagashima, Ryoichi Horisaki, Takuro Ideguchi

Abstract: Label-free optical imaging is valuable in biology and medicine with its non-destructive property and reduced optical and chemical damages. Quantitative phase (QPI) and molecular vibrational imaging (MVI) are the two most successful label-free methods, providing morphology and biochemistry, respectively, that have pioneered numerous applications along their independent technological maturity over t… ▽ More Label-free optical imaging is valuable in biology and medicine with its non-destructive property and reduced optical and chemical damages. Quantitative phase (QPI) and molecular vibrational imaging (MVI) are the two most successful label-free methods, providing morphology and biochemistry, respectively, that have pioneered numerous applications along their independent technological maturity over the past few decades. However, the distinct label-free contrasts are inherently complementary and difficult to integrate due to the use of different light-matter interactions. Here, we present a unified imaging scheme that realizes simultaneous and in-situ acquisition of MV-fingerprint contrasts of single cells in the framework of QPI utilizing the mid-infrared photothermal effect. The fully label-free and robust integration of subcellular morphology and biochemistry would have important implications, especially for studying complex and fragile biological phenomena such as drug delivery, cellular diseases and stem cell development, where long-time observation of unperturbed cells are needed under low phototoxicity. △ Less

Submitted 5 December, 2019; originally announced December 2019.

Time-stretch infrared spectroscopy

Authors: Akira Kawai, Kazuki Hasihmoto, Venkata Ramaiah Badarla, Takayuki Imamura, Takuro Ideguchi

Abstract: Improving spectral acquisition rate of broadband mid-infrared spectroscopy promises further advancements of molecular science and technology. Unlike the pump-probe spectroscopy that requires repeated measurements with different pump-probe delays, continuous spectroscopy running at a high spectral acquisition rate enables transient measurements of rapidly changing non-repeating phenomena or statist… ▽ More Improving spectral acquisition rate of broadband mid-infrared spectroscopy promises further advancements of molecular science and technology. Unlike the pump-probe spectroscopy that requires repeated measurements with different pump-probe delays, continuous spectroscopy running at a high spectral acquisition rate enables transient measurements of rapidly changing non-repeating phenomena or statistical analysis of a large amount of spectral data acquired within a short time. Recently, Fourier-transform infrared spectrometers (FT-IR) with rapid delay scan mechanisms including dual-comb spectrometers have significantly improved the measurement rate up to ~1 MSpectra/s that is fundamentally limited by the signal-to-noise ratio. Here, we overcome the limit and demonstrate the fastest continuous broadband vibrational spectrometer running at 80 MSpectra/s by implementing wavelength-swept time-stretch spectroscopy technique in the mid-infrared region. Our proof-of-concept experiment of the time-stretch infrared spectroscopy (TS-IR) demonstrates broadband absorption spectroscopy of phenylacetylene from 4.4 to 4.9 μm (2040-2270 cm-1) at a resolution of 15 nm (7.7 cm-1) with a superior signal-to-noise ratio of 85 without averaging and a shot-to-shot fluctuation of 1.3%. △ Less

Submitted 3 June, 2020; v1 submitted 9 December, 2019; originally announced December 2019.

Complementary Vibrational Spectroscopy

Authors: Kazuki Hashimoto, Venkata Ramaiah Badarla, Akira Kawai, Takuro Ideguchi

Abstract: Vibrational spectroscopy, comprised of infrared absorption and Raman scattering spectroscopy, is widely used for label-free optical sensing and imaging in various scientific and industrial fields. The group theory states that the two molecular spectroscopy methods are sensitive to vibrations categorized in different point groups and provide complementary vibrational spectra. Therefore, complete vi… ▽ More Vibrational spectroscopy, comprised of infrared absorption and Raman scattering spectroscopy, is widely used for label-free optical sensing and imaging in various scientific and industrial fields. The group theory states that the two molecular spectroscopy methods are sensitive to vibrations categorized in different point groups and provide complementary vibrational spectra. Therefore, complete vibrational information cannot be acquired by a single spectroscopic device, which has impeded the full potential of vibrational spectroscopy. Here, we demonstrate simultaneous infrared absorption and Raman scattering spectroscopy that allows us to measure the complete broadband vibrational spectra in the molecular fingerprint region with a single instrument based on an ultrashort pulsed laser. The system is based on dual-modal Fourier-transform spectroscopy enabled by efficient use of nonlinear optical effects. Our proof-of-concept experiment demonstrates rapid, broadband and high spectral resolution measurements of complementary spectra of organic liquids for precise and accurate molecular analysis. △ Less

Submitted 4 April, 2019; originally announced April 2019.

Quantitative phase imaging with molecular vibrational sensitivity

Authors: Miu Tamamitsu, Keiichiro Toda, Ryoichi Horisaki, Takuro Ideguchi

Abstract: Quantitative phase imaging (QPI) quantifies the sample-specific optical-phase-delay enabling objective studies of optically-transparent specimens such as biological samples, but lacks chemical sensitivity limiting its application to morphology-based diagnosis. We present wide-field molecular-vibrational microscopy realized in the framework of QPI utilizing mid-infrared photothermal effect. Our tec… ▽ More Quantitative phase imaging (QPI) quantifies the sample-specific optical-phase-delay enabling objective studies of optically-transparent specimens such as biological samples, but lacks chemical sensitivity limiting its application to morphology-based diagnosis. We present wide-field molecular-vibrational microscopy realized in the framework of QPI utilizing mid-infrared photothermal effect. Our technique provides mid-infrared spectroscopic performance comparable to that of a conventional infrared spectrometer in the molecular fingerprint region of 1,450 - 1,600 cm-1 and realizes wide-field molecular imaging of silica-polystyrene beads mixture over 100 μm x 100 μm area at 1 frame per second with the spatial resolution of 430 nm and 2 - 3 orders of magnitude lower fluence of ~10 pJ/μm2 compared to other high-speed label-free molecular imaging methods, reducing photodamages to the sample. With a high-energy mid-infrared pulse source, our technique could enable high-speed, label-free, simultaneous and in-situ acquisition of quantitative morphology and molecular-vibrational contrast, providing new insights for studies of optically-transparent complex dynamics. △ Less

Submitted 18 March, 2019; originally announced March 2019.

Molecular contrast on phase-contrast microscope

Authors: Keiichiro Toda, Miu Tamamitsu, Ryoichi Horisaki, Takuro Ideguchi

Abstract: An optical microscope enables image-based findings and diagnosis on microscopic targets, which is indispensable in many scientific, industrial and medical settings. Majority of microscope users are accustomed to standard benchtop microscopes, but it fails to give molecular contrast of the specimen which otherwise requires expensive specialized instruments to measure, accompanied by chemical or opt… ▽ More An optical microscope enables image-based findings and diagnosis on microscopic targets, which is indispensable in many scientific, industrial and medical settings. Majority of microscope users are accustomed to standard benchtop microscopes, but it fails to give molecular contrast of the specimen which otherwise requires expensive specialized instruments to measure, accompanied by chemical or optical damages to the sample and/or slow imaging speed. Here, we report on a simple optical instrument, comprising of a semiconductor amplitude-modulated mid-infrared quantum cascade laser, that is attached to a standard microscope to deliver the additional molecular contrast of the specimen on top of its conventional microscopic image. We attach this instrument, termed molecular-contrast unit, to a standard phase-contrast microscope, and demonstrate high-speed label-free molecular-contrast phase-contrast imaging of biological cells under low-power optical illumination. Our simple molecular-contrast unit can empower existing standard microscopes of various users, by delivering a convenient accessibility to the molecular world. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Phase-controlled Fourier-transform spectroscopy

Authors: Kazuki Hashimoto, Takuro Ideguchi

Abstract: Fourier-transform spectroscopy (FTS) has been widely used as a standard analytical technique over the past half-century. FTS is a simple and robust autocorrelation-based technique that is compatible with both temporally coherent and incoherent light sources, which functions as an active or passive spectrometer. However, this technique has been mostly used for static measurements due to the low sca… ▽ More Fourier-transform spectroscopy (FTS) has been widely used as a standard analytical technique over the past half-century. FTS is a simple and robust autocorrelation-based technique that is compatible with both temporally coherent and incoherent light sources, which functions as an active or passive spectrometer. However, this technique has been mostly used for static measurements due to the low scan rate imposed by technological restrictions. This has impeded its application to continuous rapid measurements, which would be of significant interest for a variety of fields, especially when monitoring of non-repeating/transient complex dynamics is desirable. Here, we demonstrate highly efficient FTS operating at a high spectral acquisition rate with a simple delay line based on a dynamic phase-control technique. The independent adjustability of phase and group delays allows us to achieve the Nyquist-limited spectral acquisition rate over 10,000 spectra per second, while maintaining a large spectral bandwidth and high resolution. In addition, we demonstrate the ability of this passive spectrometer working with an incoherent light source. △ Less

Submitted 6 July, 2018; originally announced July 2018.

A bidirectional dual-comb ring laser for simple and robust dual-comb spectroscopy

Authors: Takuro Ideguchi, Tasuku Nakamura, Yohei Kobayashi, Keisuke Goda

Abstract: Fourier-transform spectroscopy is an indispensable tool for analyzing chemical samples in scientific research as well as chemical and pharmaceutical industries. Recently, its measurement speed, sensitivity, and precision have been shown to be significantly enhanced by using dual frequency combs. However, wide acceptance of this technique is hindered by its requirement for two frequency combs and a… ▽ More Fourier-transform spectroscopy is an indispensable tool for analyzing chemical samples in scientific research as well as chemical and pharmaceutical industries. Recently, its measurement speed, sensitivity, and precision have been shown to be significantly enhanced by using dual frequency combs. However, wide acceptance of this technique is hindered by its requirement for two frequency combs and active stabilization of the combs. Here we overcome this predicament with a Kerr-lens mode-locked bidirectional ring laser that generates two frequency combs with slightly different pulse repetition rates and a tunable yet highly stable rate difference. This peculiar lasing principle builds on a slight difference in optical cavity length between two counter-propagating lasing modes due to Kerr lensing. Since these combs are produced by the one and same laser cavity, their relative coherence stays passively stable without the need for active stabilization. To show its utility, we demonstrate broadband dual-comb spectroscopy with the single laser. △ Less

Submitted 3 December, 2015; originally announced December 2015.

An octave spanning mid-infrared frequency comb generated in a silicon nanophotonic wire waveguide

Authors: Bart Kuyken, Takuro Ideguchi, Simon Holzner, Ming Yan, Theodor W. Haensch, Joris Van Campenhout, Peter Verheyen, Stéphane Coen, Francois Leo, Roel Baets, Gunther Roelkens, Nathalie Picque

Abstract: We demonstrate an octave-spanning frequency comb with a spectrum covering wavelengths from 1,540 nm up to 3,200 nm. The supercontinuum is generated by pum** a 1-cm long dispersion engineered silicon wire waveguide by 70 fs pulses with an energy of merely 15 pJ. We confirm the phase coherence of the output spectrum by beating the supercontinuum with narrow bandwidth CW lasers. We show that the ex… ▽ More We demonstrate an octave-spanning frequency comb with a spectrum covering wavelengths from 1,540 nm up to 3,200 nm. The supercontinuum is generated by pum** a 1-cm long dispersion engineered silicon wire waveguide by 70 fs pulses with an energy of merely 15 pJ. We confirm the phase coherence of the output spectrum by beating the supercontinuum with narrow bandwidth CW lasers. We show that the experimental results are in agreement with numerical simulations. △ Less

Submitted 16 May, 2014; originally announced May 2014.

Few-cycle, Broadband, Mid-infrared Optical Parametric Oscillator Pumped by a 20-fs Ti:sapphire Laser

Authors: Suddapalli Chaitanya Kumar, Adolfo Esteban-Martin, Takuro Ideguchi, Ming Yan, Simon Holzner, Theodor W. Hänsch, Nathalie Picqué, Majid Ebrahim-Zadeh

Abstract: We report a few-cycle, broadband, singly-resonant optical parametric oscillator (OPO) for the mid-infrared based on MgO-doped periodically-poled LiNbO3 (MgO:PPLN), synchronously pumped by a 20-fs Ti:sapphire laser. By using crystal interaction lengths as short as 250 um, and careful dispersion management of input pump pulses and the OPO resonator, near-transform-limited, few-cycle idler pulses tun… ▽ More We report a few-cycle, broadband, singly-resonant optical parametric oscillator (OPO) for the mid-infrared based on MgO-doped periodically-poled LiNbO3 (MgO:PPLN), synchronously pumped by a 20-fs Ti:sapphire laser. By using crystal interaction lengths as short as 250 um, and careful dispersion management of input pump pulses and the OPO resonator, near-transform-limited, few-cycle idler pulses tunable across the mid-infrared have been generated, with as few as 3.7 optical cycles at 2682 nm. The OPO can be continuously tuned over 2179-3732 nm by cavity delay tuning, providing up to 33 mW of output power at 3723 nm. The idler spectra exhibit stable broadband profiles with bandwidths spaning over 422 nm (FWHM) recorded at 3732 nm. We investigate the effect of crystal length on spectral bandwidth and pulse duration at a fixed wavelength, confirming near-transform-limited idler pulses for all grating interaction lengths. By locking the repetition frequency of the pump laser to a radio-frequency reference, and without active stabilization of the OPO cavity length, an idler power stability better than 1.6% rms over >2.75 hours is obtained when operating at maximum output power, in excellent spatial beam quality with TEM00 mode profile. △ Less

Submitted 7 April, 2014; originally announced April 2014.

Comments: 12 pages, 8 figures

MSC Class: 78-05

Differential femtosecond coherent Stokes and anti-Stokes Raman spectroscopy

Authors: Takuro Ideguchi, Simon Holzner, Ming Yan, Guy Guelachvili, Theodor W. Hänsch, Nathalie Picqué

Abstract: We demonstrate a novel technique of coherent Raman spectroscopy with a femtosecond laser. We apply to a molecular sample a sequence of pairs of ultrashort excitation and probe pulses, with a linearly increasing time delay between the two pulses from one pair to the next. We measure, as a function of the delay, the intensity modulation in the signal resulting from the differential detection of the… ▽ More We demonstrate a novel technique of coherent Raman spectroscopy with a femtosecond laser. We apply to a molecular sample a sequence of pairs of ultrashort excitation and probe pulses, with a linearly increasing time delay between the two pulses from one pair to the next. We measure, as a function of the delay, the intensity modulation in the signal resulting from the differential detection of the Stokes and anti-Stokes radiations generated at the sample. The Fourier transform of such time-domain signal reveals the spectrum of the excited vibrational Raman transitions. The experimental proof-of-principle demonstrates high resolution, broad spectral span and suppression of the non-resonant background, as well as sensitivity enhancement due to the differential detection. △ Less

Submitted 15 March, 2014; originally announced March 2014.

Comments: 7 pages, 4 figures

MSC Class: 78-05

Broadband high-resolution two-photon spectroscopy with laser frequency combs

Authors: Arthur Hipke, Samuel A. Meek, Takuro Ideguchi, Theodor W. Hänsch, Nathalie Picqué

Abstract: Two-photon excitation spectroscopy with broad spectral span is demonstrated at Doppler-limited resolution. We describe first Fourier transform two-photon spectroscopy of an atomic sample with two mode-locked laser oscillators in a dual-comb technique. Each transition is uniquely identified by the modulation imparted by the interfering comb excitations. The temporal modulation of the spontaneous tw… ▽ More Two-photon excitation spectroscopy with broad spectral span is demonstrated at Doppler-limited resolution. We describe first Fourier transform two-photon spectroscopy of an atomic sample with two mode-locked laser oscillators in a dual-comb technique. Each transition is uniquely identified by the modulation imparted by the interfering comb excitations. The temporal modulation of the spontaneous two-photon fluorescence is monitored with a single photodetector, and the spectrum is revealed by a Fourier transform. △ Less

Submitted 24 November, 2013; originally announced November 2013.

Comments: 7 pages, 3 figures

Coherent Raman spectro-imaging with laser frequency combs

Authors: Takuro Ideguchi, Simon Holzner, Birgitta Bernhardt, Guy Guelachvili, Nathalie Picqué, Theodor W. Hänsch

Abstract: Optical spectroscopy and imaging of microscopic samples have opened up a wide range of applications throughout the physical, chemical, and biological sciences. High chemical specificity may be achieved by directly interrogating the fundamental or low-lying vibrational energy levels of the compound molecules. Amongst the available prevailing label-free techniques, coherent Raman scattering has the… ▽ More Optical spectroscopy and imaging of microscopic samples have opened up a wide range of applications throughout the physical, chemical, and biological sciences. High chemical specificity may be achieved by directly interrogating the fundamental or low-lying vibrational energy levels of the compound molecules. Amongst the available prevailing label-free techniques, coherent Raman scattering has the distinguishing features of high spatial resolution down to 200 nm and three-dimensional sectioning. However, combining fast imaging speed and identification of multiple - and possibly unexpected- compounds remains challenging: existing high spectral resolution schemes require long measurement times to achieve broad spectral spans. Here we overcome this difficulty and introduce a novel concept of coherent anti-Stokes Raman scattering (CARS) spectro-imaging with two laser frequency combs. We illustrate the power of our technique with high resolution (4 cm-1) Raman spectra spanning more than 1200 cm-1 recorded within less than 15 microseconds. Furthermore, hyperspectral images combining high spectral (10 cm-1) and spatial (2 micrometers) resolutions are acquired at a rate of 50 pixels per second. Real-time multiplex accessing of hyperspectral images may dramatically expand the range of applications of nonlinear microscopy. △ Less

Submitted 11 February, 2013; originally announced February 2013.

Comments: 8 pages, 3 figures

Journal ref: Nature 502, 355-358 (2013)

Adaptive dual-comb spectroscopy in the green region

Authors: Takuro Ideguchi, Antonin Poisson, Guy Guelachvili, Theodor W. Hänsch, Nathalie Picqué

Abstract: Dual-comb spectroscopy is extended to the visible spectral range with a set-up based on two frequency-doubled femtosecond ytterbium-doped fiber lasers. The dense rovibronic spectrum of iodine around 19240 cm-1 is recorded within 12 ms at Doppler-limited resolution with a simple scheme that only uses free-running femtosecond lasers. Dual-comb spectroscopy is extended to the visible spectral range with a set-up based on two frequency-doubled femtosecond ytterbium-doped fiber lasers. The dense rovibronic spectrum of iodine around 19240 cm-1 is recorded within 12 ms at Doppler-limited resolution with a simple scheme that only uses free-running femtosecond lasers. △ Less

Submitted 22 August, 2012; originally announced August 2012.

Journal ref: Optics Letters 37, 4847-4849 (2012)

Raman-induced Kerr-effect dual-comb spectroscopy

Authors: Takuro Ideguchi, Birgitta Bernhardt, Guy Guelachvili, Theodor W. Hänsch, Nathalie Picqué

Abstract: We report on the first demonstration of nonlinear dual-frequency-comb spectroscopy. In multi-heterodyne femtosecond Raman-induced Kerr-effect spectroscopy, the Raman gain resulting from the coherent excitation of molecular vibrations by a spectrally-narrow pump is imprinted onto the femtosecond laser frequency comb probe spectrum. The birefringence signal induced by the nonlinear interaction of th… ▽ More We report on the first demonstration of nonlinear dual-frequency-comb spectroscopy. In multi-heterodyne femtosecond Raman-induced Kerr-effect spectroscopy, the Raman gain resulting from the coherent excitation of molecular vibrations by a spectrally-narrow pump is imprinted onto the femtosecond laser frequency comb probe spectrum. The birefringence signal induced by the nonlinear interaction of these beams and the sample is heterodyned against a frequency comb local oscillator with a repetition frequency slightly different from that of the comb probe. Such time-domain interference provides multiplex access to the phase and amplitude Raman spectra over a broad spectral bandwidth within a short measurement time. Experimental demonstration, at a spectral resolution of 200 GHz, a measurement time of 293 μs and a sensitivity of 10^-6, is given on liquid samples exhibiting a C-H stretch Raman shift. △ Less

Submitted 6 August, 2012; originally announced August 2012.

Comments: 7 pages, 4 figures

Journal ref: Optics Letters 37, 4498-4500 (2012)

Adaptive real-time dual-comb spectroscopy

Authors: Takuro Ideguchi, Antonin Poisson, Guy Guelachvili, Nathalie Picqué, Theodor W. Hänsch

Abstract: With the advent of laser frequency combs, coherent light sources that offer equally-spaced sharp lines over a broad spectral bandwidth have become available. One decade after revolutionizing optical frequency metrology, frequency combs hold much promise for significant advances in a growing number of applications including molecular spectroscopy. Despite its intriguing potential for the measuremen… ▽ More With the advent of laser frequency combs, coherent light sources that offer equally-spaced sharp lines over a broad spectral bandwidth have become available. One decade after revolutionizing optical frequency metrology, frequency combs hold much promise for significant advances in a growing number of applications including molecular spectroscopy. Despite its intriguing potential for the measurement of molecular spectra spanning tens of nanometers within tens of microseconds at Doppler-limited resolution, the development of dual-comb spectroscopy is hindered by the extremely demanding high-bandwidth servo-control conditions of the laser combs. Here we overcome this difficulty. We experimentally demonstrate a straightforward concept of real-time dual-comb spectroscopy, which only uses free-running mode-locked lasers without any phase-lock electronics, a posteriori data-processing, or the need for expertise in frequency metrology. The resulting simplicity and versatility of our new technique of adaptive dual-comb spectroscopy offer a powerful transdisciplinary instrument that may spark off new discoveries in molecular sciences. △ Less

Submitted 28 August, 2012; v1 submitted 19 January, 2012; originally announced January 2012.

Comments: 10 pages, 5 figures

Journal ref: Nature Communications 5, 3375 (2014)