-
Structural and Electrical Properties of Grafted Si/GaAsSb Heterojunction
Authors:
Haris Naeem Abbasi,
Seunghyun Lee,
Hyemin Jung,
Nathan Gajowski,
Yi Lu,
Linus Wang,
Donghyeok Kim,
Jie Zhou,
Jiarui Gong,
Chris Chae,
**woo Hwang,
Manisha Muduli,
Subramanya Nookala,
Zhenqiang Ma,
Sanjay Krishna
Abstract:
The short-wave infrared (SWIR) wavelength, especially 1.55 um, has attracted significant attention in various areas such as high-speed optical communication and LiDAR systems. Avalanche photodiodes (APDs) are a critical component as a receiver in these systems due to their internal gain which enhances the system performance. Silicon-based APDs are promising since they are CMOS compatible, but they…
▽ More
The short-wave infrared (SWIR) wavelength, especially 1.55 um, has attracted significant attention in various areas such as high-speed optical communication and LiDAR systems. Avalanche photodiodes (APDs) are a critical component as a receiver in these systems due to their internal gain which enhances the system performance. Silicon-based APDs are promising since they are CMOS compatible, but they are limited in detecting 1.55 um light detection. This study proposes a p-type Si on n-type GaAs0.51Sb0.49 (GaAsSb) lattice matched to InP substrates heterojunction formed using a grafting technique for future GaAsSb/Si APD technology. A p+Si nanomembrane is transferred onto the GaAsSb/AlInAs/InP substrate, with an ultrathin ALD-Al2O3 oxide at the interface, which behaves as both double-side passivation and quantum tunneling layers. The devices exhibit excellent surface morphology and interface quality, confirmed by atomic force microscope (AFM) and transmission electron microscope (TEM). Also, the current-voltage (I-V) of the p+Si/n-GaAsSb heterojunction shows ideal rectifying characteristics with an ideality factor of 1.15. The I-V tests across multiple devices confirm high consistency and yield. Furthermore, the X-ray photoelectron spectroscopy (XPS) measurement reveals that GaAsSb and Si are found to have type-II band alignment with a conduction band offset of 50 meV which is favorable for the high-bandwidth APD application. The demonstration of the GaAsSb/Si heterojunction highlights the potential to advance current SWIR PD technologies.
△ Less
Submitted 24 June, 2024; v1 submitted 20 June, 2024;
originally announced June 2024.
-
Exploring the Theoretical Limits of Efficiency in Multilayer Solar Cells
Authors:
Jeonggyu Hwang
Abstract:
Photovoltaic materials are recognized for their potential as sustainable energy sources that enable the conversion between light and electrical energy. However, solar cells have been unable to surpass the theoretical limit of 32%, known as the Shockley-Queisser limit, and face challenges in effectively utilizing the broad spectrum of sunlight. To address this issue, extensive research is being con…
▽ More
Photovoltaic materials are recognized for their potential as sustainable energy sources that enable the conversion between light and electrical energy. However, solar cells have been unable to surpass the theoretical limit of 32%, known as the Shockley-Queisser limit, and face challenges in effectively utilizing the broad spectrum of sunlight. To address this issue, extensive research is being conducted on multi-junction solar cells, which employ a layered structure comprising materials with varying bandgaps to more effectively harness the wide spectrum of sunlight. This study calculates the theoretical limit of these multi-junction solar cells and identifies optimal bandgap combinations, exploring new possibilities for photovoltaic devices and suggesting directions for technological advancement. The performance saw a 31% improvement when moving from a single layer to two layers, and a 12% improvement from two layers to three, with the average wavelength situated in the late 800nm range. The wavelength of the bottom layer increased by about 200nm, and that of the second layer by about 150nm. Our findings present new opportunities to surpass the current limitations of solar cell technology, potentially enhancing the economic feasibility and utility of solar energy as a sustainable source.
△ Less
Submitted 16 June, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
An inversion problem for optical spectrum data via physics-guided machine learning
Authors:
Hwiwoo Park,
Jun H. Park,
Jungseek Hwang
Abstract:
We propose the regularized recurrent inference machine (rRIM), a novel machine-learning approach to solve the challenging problem of deriving the pairing glue function from measured optical spectra. The rRIM incorporates physical principles into both training and inference and affords noise robustness, flexibility with out-of-distribution data, and reduced data requirements. It effectively obtains…
▽ More
We propose the regularized recurrent inference machine (rRIM), a novel machine-learning approach to solve the challenging problem of deriving the pairing glue function from measured optical spectra. The rRIM incorporates physical principles into both training and inference and affords noise robustness, flexibility with out-of-distribution data, and reduced data requirements. It effectively obtains reliable pairing glue functions from experimental optical spectra and yields promising solutions for similar inverse problems of the Fredholm integral equation of the first kind.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Measurements and modeling of induced flow in collective vertical migration
Authors:
Nina Mohebbi,
Joonha Hwang,
Matthew K. Fu,
John O. Dabiri
Abstract:
Hydrodynamic interactions among swimming or flying organisms can lead to complex flows on the scale of the group. These emergent fluid dynamics are often more complex than a linear superposition of individual organism flows, especially at intermediate Reynolds numbers. This paper presents an approach to estimate the flow induced by multiple swimmer wakes in proximity using an analytical model that…
▽ More
Hydrodynamic interactions among swimming or flying organisms can lead to complex flows on the scale of the group. These emergent fluid dynamics are often more complex than a linear superposition of individual organism flows, especially at intermediate Reynolds numbers. This paper presents an approach to estimate the flow induced by multiple swimmer wakes in proximity using an analytical model that conserves mass and momentum in the aggregation. This analytical model was informed by and validated with empirical measurements of induced vertical migrations of brine shrimp, $\textit{Artemia salina}$. The response of individual swimmers to ambient background flow and light intensity was evaluated. In addition, the time-resolved three-dimensional spatial configuration of the swimmers was measured using a recently developed laser scanning system. Computational experiments using the analytical model found that the induced flow at the front of the aggregation was insensitive to the presence of downstream swimmers, with the induced flow reaching an asymptote beyond a threshold aggregation length. Closer swimmer spacing led to higher induced flow, in some cases leading to model predictions of induced flow exceeding swimmer speeds required to maintain a stable spatial configuration. This result was reconciled by comparing two different models for the near-wake of each swimmer. Our results demonstrate that aggregation-scale flows result from a complex, yet predictable interplay amongst organism-scale wake structure, swimmer spacing and configuration, and aggregation size.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Climate-dependent enhancement of radiative cooling with mirror structures
Authors:
Jaesuk Hwang
Abstract:
Radiative cooling exploits the imbalance between the thermal emission from the radiative cooling surface and the downward atmospheric emission. Since the atmospheric emission power is polar angle-dependent, a mirror structure can be used to increase this imbalance and to amplify the net cooling power. The degree of amplification is determined by various parameters such as the sky emissivity, the g…
▽ More
Radiative cooling exploits the imbalance between the thermal emission from the radiative cooling surface and the downward atmospheric emission. Since the atmospheric emission power is polar angle-dependent, a mirror structure can be used to increase this imbalance and to amplify the net cooling power. The degree of amplification is determined by various parameters such as the sky emissivity, the geometry of the mirror structure and the degree of thermal insulation. A parametric study of the aperture mirror-enhanced radiative cooling is presented using a model atmosphere, characterized by an average sky window emissivity and the ambient temperature. A counterintuitive finding is obtained, namely that the aperture mirror structure is more effective in the tropics than in the desert, both in terms of the cooling power and the temperature reduction. The power enhancement obtainable from a relatively simple mirror structure can be significant. For example, in the tropics, the cooling power can be enhanced by more than 40%. The aperture mirror structure holds potential to be a practical augmentation to improve the stagnant temperature and the response time of radiative cooling devices.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
Digital Typhoon: Long-term Satellite Image Dataset for the Spatio-Temporal Modeling of Tropical Cyclones
Authors:
Asanobu Kitamoto,
Jared Hwang,
Bastien Vuillod,
Lucas Gautier,
Yingtao Tian,
Tarin Clanuwat
Abstract:
This paper presents the official release of the Digital Typhoon dataset, the longest typhoon satellite image dataset for 40+ years aimed at benchmarking machine learning models for long-term spatio-temporal data. To build the dataset, we developed a workflow to create an infrared typhoon-centered image for crop** using Lambert azimuthal equal-area projection referring to the best track data. We…
▽ More
This paper presents the official release of the Digital Typhoon dataset, the longest typhoon satellite image dataset for 40+ years aimed at benchmarking machine learning models for long-term spatio-temporal data. To build the dataset, we developed a workflow to create an infrared typhoon-centered image for crop** using Lambert azimuthal equal-area projection referring to the best track data. We also address data quality issues such as inter-satellite calibration to create a homogeneous dataset. To take advantage of the dataset, we organized machine learning tasks by the types and targets of inference, with other tasks for meteorological analysis, societal impact, and climate change. The benchmarking results on the analysis, forecasting, and reanalysis for the intensity suggest that the dataset is challenging for recent deep learning models, due to many choices that affect the performance of various models. This dataset reduces the barrier for machine learning researchers to meet large-scale real-world events called tropical cyclones and develop machine learning models that may contribute to advancing scientific knowledge on tropical cyclones as well as solving societal and sustainability issues such as disaster reduction and climate change. The dataset is publicly available at http://agora.ex.nii.ac.jp/digital-typhoon/dataset/ and https://github.com/kitamoto-lab/digital-typhoon/.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
Daytime radiative cooling under extreme weather conditions
Authors:
Jaesuk Hwang
Abstract:
Radiative cooling, taking advantage of the coldness of the sky, has a potential to be a sustainable alternative to meet cooling needs. The performance of a radiative cooling device is fundamentally limited by the emissivity of the sky, therefore depends heavily on the regional weather conditions. Although the sky emissivity is known to increase with the dew point temperature, this interdependence…
▽ More
Radiative cooling, taking advantage of the coldness of the sky, has a potential to be a sustainable alternative to meet cooling needs. The performance of a radiative cooling device is fundamentally limited by the emissivity of the sky, therefore depends heavily on the regional weather conditions. Although the sky emissivity is known to increase with the dew point temperature, this interdependence relates only to clear skies and does not cover extreme weather conditions. Therefore, the feasibility of radiative cooling remains elusive in the equatorial tropical climate. A case study of Singapore is presented where the weather is humid, cloudy and constantly changing. We point out that a high degree of thermal insulation of the radiative cooling system can be effective under such extreme weather conditions. A new method to characterise dynamic sky conditions is presented, namely to measure the sky window emissivity in the zenith direction. We show that a sub-ambient cooling up to 8 °C is possible during daytime and that the cloud base is not a complete blackbody and can be used as a heat sink for radiative cooling.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Advanced methods for analyzing in-situ observations of magnetic reconnection
Authors:
H. Hasegawa,
M. R. Argall,
N. Aunai,
R. Bandyopadhyay,
N. Bessho,
I. J. Cohen,
R. E. Denton,
J. C. Dorelli,
J. Egedal,
S. A. Fuselier,
P. Garnier,
V. Genot,
D. B. Graham,
K. J. Hwang,
Y. V. Khotyaintsev,
D. B. Korovinskiy,
B. Lavraud,
Q. Lenouvel,
T. C. Li,
Y. -H. Liu,
B. Michotte de Welle,
T. K. M. Nakamura,
D. S. Payne,
S. M. Petrinec,
Y. Qi
, et al. (11 additional authors not shown)
Abstract:
There is ample evidence for magnetic reconnection in the solar system, but it is a nontrivial task to visualize, to determine the proper approaches and frames to study, and in turn to elucidate the physical processes at work in reconnection regions from in-situ measurements of plasma particles and electromagnetic fields. Here an overview is given of a variety of single- and multi-spacecraft data a…
▽ More
There is ample evidence for magnetic reconnection in the solar system, but it is a nontrivial task to visualize, to determine the proper approaches and frames to study, and in turn to elucidate the physical processes at work in reconnection regions from in-situ measurements of plasma particles and electromagnetic fields. Here an overview is given of a variety of single- and multi-spacecraft data analysis techniques that are key to revealing the context of in-situ observations of magnetic reconnection in space and for detecting and analyzing the diffusion regions where ions and/or electrons are demagnetized. We focus on recent advances in the era of the Magnetospheric Multiscale mission, which has made electron-scale, multi-point measurements of magnetic reconnection in and around Earth's magnetosphere.
△ Less
Submitted 24 June, 2024; v1 submitted 11 July, 2023;
originally announced July 2023.
-
Energy-Flexible Network (EF-Net) for Dual-Energy CT Image Reconstruction
Authors:
Donghyeon Lee,
Ui** Jeong,
Sungho Yun,
Joonil Hwang,
Seungryong Cho
Abstract:
In dual-energy computed tomography (DECT), the X-ray tube energy pair often changes depending on the target organ or patient obesity. In practice, it makes difficult to apply deep learning (DL) based algorithms for image reconstruction since most of the existing DL-based algorithms are trained to be used for dedicated X-ray tube energies. In this paper, we propose 1) an energy flexibility training…
▽ More
In dual-energy computed tomography (DECT), the X-ray tube energy pair often changes depending on the target organ or patient obesity. In practice, it makes difficult to apply deep learning (DL) based algorithms for image reconstruction since most of the existing DL-based algorithms are trained to be used for dedicated X-ray tube energies. In this paper, we propose 1) an energy flexibility training (EFT) method, which makes a network applicable for data measured at various X-ray tube energies between two trained energies, and 2) an effective dual-domain convolutional neural network for image reconstruction. The proposed network is derived from the regularized version of the primal-dual hybrid gradient algorithm, so its architecture has an unfolded iterative dual-domain structure. For validation, we generated datasets from a lab-made polychromatic X-ray simulator. The proposed method showed promising results not only at the trained X-ray tube energies but also at untrained X-ray tube energies outperforming an iterative algorithm and other DL-based algorithms.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
FerroHEMTs: High-Current and High-Speed All-Epitaxial AlScN/GaN Ferroelectric Transistors
Authors:
J. Casamento,
K. Nomoto,
T. S. Nguyen,
H. Lee,
C. Savant,
L. Li,
A. Hickman,
T. Maeda,
J. Encomendero,
V. Gund,
A. Lal,
J. C. M. Hwang,
H. G. Xing,
D. Jena
Abstract:
We report the first observation of ferroelectric gating in AlScN barrier wide-bandgap nitride transistors. These FerroHEMT devices realized by direct epitaxial growth represent a new class of ferroelectric transistors in which the semiconductor is itself polar, and the crystalline ferroelectric barrier is lattice-matched to the substrate. The FerroHEMTs reported here use the thinnest nitride high…
▽ More
We report the first observation of ferroelectric gating in AlScN barrier wide-bandgap nitride transistors. These FerroHEMT devices realized by direct epitaxial growth represent a new class of ferroelectric transistors in which the semiconductor is itself polar, and the crystalline ferroelectric barrier is lattice-matched to the substrate. The FerroHEMTs reported here use the thinnest nitride high K and ferroelectric barriers to date to deliver the highest on currents at 4 A/mm, and highest speed AlScN transistors with fmax larger than 150 GHz observed in any ferroelectric transistor. The FerroHEMTs exhibit hysteretic Id Vgs loops with subthreshold slopes below the Boltzmann limit. A control AlN barrier HEMT exhibits neither hysteretic, nor sub Boltzmann behavior. While these results introduce the first epitaxial high K and ferroelectric barrier technology to RF and mm wave electronics, they are also of interest as a new material platform for combining memory and logic functionalities in digital electronics.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Simultaneous control of spectral and directional emissivity with gradient epsilon-near-zero InAs photonic structures
Authors:
Jae Seung Hwang,
** Xu,
Aaswath P. Raman
Abstract:
Controlling both the spectral bandwidth and directional range of emitted thermal radiation is a fundamental challenge in modern photonics and materials research. Recent work has shown that materials with a spatial gradient in their epsilon near zero response can support broad spectrum directionality in their emissivity, enabling high radiance to specific angles of incidence. However, this capabili…
▽ More
Controlling both the spectral bandwidth and directional range of emitted thermal radiation is a fundamental challenge in modern photonics and materials research. Recent work has shown that materials with a spatial gradient in their epsilon near zero response can support broad spectrum directionality in their emissivity, enabling high radiance to specific angles of incidence. However, this capability has been limited spectrally and directionally by the availability of materials supporting phonon-polariton resonances over long-wave infrared wavelengths. Here, we design and experimentally demonstrate an approach using doped III-V semiconductors that can simultaneously tailor spectral peak, bandwidth and directionality of infrared emissivity. We epitaxially grow and characterize InAs-based gradient ENZ photonic structures that exhibit broadband directional emission with varying spectral bandwidths and peak directions as a function of their do** concentration profile and thickness. Due to its easy-to-fabricate geometry we believe this approach provides a versatile photonic platform to dynamically control broadband spectral and directional emissivity for a range of emerging applications.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
Ultra-Wide Bandgap Ga$_2$O$_3$-on-SiC MOSFETs
Authors:
Yiwen Song,
Arkka Bhattacharyya,
Anwarul Karim,
Daniel Shoemaker,
Hsien-Lien Huang,
Saurav Roy,
Craig McGray,
Jacob H. Leach,
**woo Hwang,
Sriram Krishnamoorthy,
Sukwon Choi
Abstract:
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O…
▽ More
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O$_3$/4H-SiC composite wafer using a fusion-bonding method. A low temperature ($\le$ 600 $^{\circ}$C) epitaxy and device processing approach based on low-temperature (LT) metalorganic vapor phase epitaxy is developed to grow a Ga$_2$O$_3$ epitaxial channel layer on the composite wafer and subsequently fabricate into Ga$_2$O$_3$ power MOSFETs. This LT approach is essential to preserve the structural integrity of the composite wafer. These LT-grown epitaxial Ga$_2$O$_3$ MOSFETs deliver high thermal performance (56% reduction in channel temperature), high voltage blocking capabilities up to 2.45 kV, and power figures of merit of $\sim$ 300 MW/cm$^2$, which is a record high for any heterogeneously integrated Ga$_2$O$_3$ devices reported to date. This work is the first realization of multi-kilovolt homoepitaxial Ga$_2$O$_3$ power MOSFETs fabricated on a composite substrate with high heat transfer performance which delivers state-of-the-art power density values while running much cooler than those on native substrates. Thermal characterization and modeling results reveal that a Ga$_2$O$_3$/diamond composite wafer with a reduced Ga$_2$O$_3$ thickness ($\sim$ 1 $μ$m) and thinner bonding interlayer ($<$ 10 nm) can reduce the device thermal impedance to a level lower than today's GaN-on-SiC power switches.
△ Less
Submitted 21 February, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
MOCVD growth and band offsets of \k{appa}-phase Ga2O3 on sapphire, GaN, AlN and YSZ substrates
Authors:
A F M Anhar Uddin Bhuiyan,
Zixuan Feng,
Hsien-Lien Huang,
Lingyu Meng,
**woo Hwang,
Hong** Zhao
Abstract:
Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on…
▽ More
Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on GaN-, AlN-on sapphire, and YSZ substrates through a systematical tuning of the growth parameters including the precursor molar flow rates, chamber pressure and growth temperature, whereas the growth on c-sapphire substrates leads to a mixture of \b{eta}- and \k{appa}polymorphs of Ga2O3 under the investigated growth conditions. The influence of the crystalline structure, surface morphology and roughness of \k{appa}-Ga2O3 films grown on different substrates are investigated as a function of precursor flow rate. High resolution scanning transmission electron microscopy (HR-STEM) imaging of \k{appa}-Ga2O3 films reveals abrupt interfaces between the epitaxial film and the sapphire, GaN and YSZ substrates. The growth of single crystal orthorhombic \k{appa}Ga2O3 films is confirmed by analyzing the STEM nano-diffraction pattern. The chemical composition, surface stoichiometry, and the bandgap energies of \k{appa}-Ga2O3 thin films grown on different substrates are studied by high resolution x-ray photoelectron spectroscopy (XPS) measurements. The type-II (staggered) band alignments at three interfaces between \k{appa}-Ga2O3 and c-sapphire, AlN, and YSZ substrates are determined by XPS, with the exception of \k{appa}-Ga2O3/GaN interface, which shows type I (straddling) band alignment.
△ Less
Submitted 12 October, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
opPINN: Physics-Informed Neural Network with operator learning to approximate solutions to the Fokker-Planck-Landau equation
Authors:
Jae Yong Lee,
Juhi Jang,
Hyung Ju Hwang
Abstract:
We propose a hybrid framework opPINN: physics-informed neural network (PINN) with operator learning for approximating the solution to the Fokker-Planck-Landau (FPL) equation. The opPINN framework is divided into two steps: Step 1 and Step 2. After the operator surrogate models are trained during Step 1, PINN can effectively approximate the solution to the FPL equation during Step 2 by using the pr…
▽ More
We propose a hybrid framework opPINN: physics-informed neural network (PINN) with operator learning for approximating the solution to the Fokker-Planck-Landau (FPL) equation. The opPINN framework is divided into two steps: Step 1 and Step 2. After the operator surrogate models are trained during Step 1, PINN can effectively approximate the solution to the FPL equation during Step 2 by using the pre-trained surrogate models. The operator surrogate models greatly reduce the computational cost and boost PINN by approximating the complex Landau collision integral in the FPL equation. The operator surrogate models can also be combined with the traditional numerical schemes. It provides a high efficiency in computational time when the number of velocity modes becomes larger. Using the opPINN framework, we provide the neural network solutions for the FPL equation under the various types of initial conditions, and interaction models in two and three dimensions. Furthermore, based on the theoretical properties of the FPL equation, we show that the approximated neural network solution converges to the a priori classical solution of the FPL equation as the pre-defined loss function is reduced.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Exploring Chemical Space with Score-based Out-of-distribution Generation
Authors:
Seul Lee,
Jaehyeong Jo,
Sung Ju Hwang
Abstract:
A well-known limitation of existing molecular generative models is that the generated molecules highly resemble those in the training set. To generate truly novel molecules that may have even better properties for de novo drug discovery, more powerful exploration in the chemical space is necessary. To this end, we propose Molecular Out-Of-distribution Diffusion(MOOD), a score-based diffusion schem…
▽ More
A well-known limitation of existing molecular generative models is that the generated molecules highly resemble those in the training set. To generate truly novel molecules that may have even better properties for de novo drug discovery, more powerful exploration in the chemical space is necessary. To this end, we propose Molecular Out-Of-distribution Diffusion(MOOD), a score-based diffusion scheme that incorporates out-of-distribution (OOD) control in the generative stochastic differential equation (SDE) with simple control of a hyperparameter, thus requires no additional costs. Since some novel molecules may not meet the basic requirements of real-world drugs, MOOD performs conditional generation by utilizing the gradients from a property predictor that guides the reverse-time diffusion process to high-scoring regions according to target properties such as protein-ligand interactions, drug-likeness, and synthesizability. This allows MOOD to search for novel and meaningful molecules rather than generating unseen yet trivial ones. We experimentally validate that MOOD is able to explore the chemical space beyond the training distribution, generating molecules that outscore ones found with existing methods, and even the top 0.01% of the original training pool. Our code is available at https://github.com/SeulLee05/MOOD.
△ Less
Submitted 3 June, 2023; v1 submitted 6 June, 2022;
originally announced June 2022.
-
Multiplication of freestanding semiconductor membranes from a single wafer by advanced remote epitaxy
Authors:
Hyunseok Kim,
Yunpeng Liu,
Kuangye Lu,
Celesta S. Chang,
Kuan Qiao,
Ki Seok Kim,
Bo-In Park,
Junseok Jeong,
Menglin Zhu,
Jun Min Suh,
Yongmin Baek,
You ** Ji,
Sungsu Kang,
Sangho Lee,
Ne Myo Han,
Chansoo Kim,
Chanyeol Choi,
Xinyuan Zhang,
Haozhe Wang,
Ling** Kong,
Jungwon Park,
Kyusang Lee,
Geun Young Yeom,
Sungkyu Kim,
**woo Hwang
, et al. (4 additional authors not shown)
Abstract:
Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to…
▽ More
Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to harvest epitaxial layers using practical processes. Here, we demonstrate a method to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, 2D materials are directly formed on III-N and III-V substrates in epitaxy systems, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of 2D materials and epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because 2D materials allow peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Swelling, Softening and Elastocapillary Adhesion of Cooked Pasta
Authors:
Jonghyun Hwang,
Jonghyun Ha,
Ryan Siu,
Yun Seong Kim,
Sameh Tawfick
Abstract:
The diverse chemical and physical reactions encountered during cooking connect us to science every day. Here, we theoretically and experimentally investigate the swelling and softening of pasta due to liquid imbibition, as well as the elastic deformation and adhesion of pasta due to capillary force. As water diffuses into the pasta during cooking, it softens gradually from the outside inward as st…
▽ More
The diverse chemical and physical reactions encountered during cooking connect us to science every day. Here, we theoretically and experimentally investigate the swelling and softening of pasta due to liquid imbibition, as well as the elastic deformation and adhesion of pasta due to capillary force. As water diffuses into the pasta during cooking, it softens gradually from the outside inward as starch swells. The softening follows three sequential regimes: Regime I shows a slow decrease of modulus with cooking time; Regime II, the glassy to rubbery transition region, is characterized by very fast, several orders of magnitude drop in modulus; and regime III, the rubbery region, has an asymptotic modulus about four orders of magnitude lower than the raw pasta. We present experiments and theory to capture these regimes and relate them to the heterogeneous microstructure changes associated with swelling. Interestingly, we observe a modulus drop of two orders of magnitude within the range of 'al dente' cooking duration, and we find the modulus to be extremely sensitive to the amount of salt added to the boiling water. While most chefs can gauge the pasta by tasting its texture, our proposed experiment, which only requires a measurement with a ruler, can precisely provide an optimal cooking time finely tuned for various kinds of pasta shapes.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Solving PDE-constrained Control Problems Using Operator Learning
Authors:
Rakhoon Hwang,
Jae Yong Lee,
** Young Shin,
Hyung Ju Hwang
Abstract:
The modeling and control of complex physical systems are essential in real-world problems. We propose a novel framework that is generally applicable to solving PDE-constrained optimal control problems by introducing surrogate models for PDE solution operators with special regularizers. The procedure of the proposed framework is divided into two phases: solution operator learning for PDE constraint…
▽ More
The modeling and control of complex physical systems are essential in real-world problems. We propose a novel framework that is generally applicable to solving PDE-constrained optimal control problems by introducing surrogate models for PDE solution operators with special regularizers. The procedure of the proposed framework is divided into two phases: solution operator learning for PDE constraints (Phase 1) and searching for optimal control (Phase 2). Once the surrogate model is trained in Phase 1, the optimal control can be inferred in Phase 2 without intensive computations. Our framework can be applied to both data-driven and data-free cases. We demonstrate the successful application of our method to various optimal control problems for different control variables with diverse PDE constraints from the Poisson equation to Burgers' equation.
△ Less
Submitted 26 December, 2023; v1 submitted 8 November, 2021;
originally announced November 2021.
-
Rydberg Quantum Wires for Maximum Independent Set Problems with Nonplanar and High-Degree Graphs
Authors:
Minhyuk Kim,
Kangheun Kim,
Jaeyong Hwang,
Eun-Gook Moon,
Jaewook Ahn
Abstract:
One prominent application of near-term quantum computing devices is to solve combinatorial optimization such as non-deterministic polynomial-time hard (NP-hard) problems. Here we present experiments with Rydberg atoms to solve one of the NP-hard problems, the maximum independent set (MIS) of graphs. We introduce the Rydberg quantum wire scheme with auxiliary atoms to engineer long-ranged networks…
▽ More
One prominent application of near-term quantum computing devices is to solve combinatorial optimization such as non-deterministic polynomial-time hard (NP-hard) problems. Here we present experiments with Rydberg atoms to solve one of the NP-hard problems, the maximum independent set (MIS) of graphs. We introduce the Rydberg quantum wire scheme with auxiliary atoms to engineer long-ranged networks of qubit atoms. Three-dimensional (3D) Rydberg-atom arrays are constructed, overcoming the intrinsic limitations of two-dimensional arrays. We demonstrate Kuratowski subgraphs and a six-degree graph, which are the essentials of non-planar and high-degree graphs. Their MIS solutions are obtained by realizing a programmable quantum simulator with the quantum-wired 3D arrays. Our construction provides a way to engineer many-body entanglement, taking a step toward quantum advantages in combinatorial optimization.
△ Less
Submitted 8 September, 2021;
originally announced September 2021.
-
Color of Copper/Copper oxide
Authors:
Su Jae Kim,
Seonghoon Kim,
Jegon Lee,
Youngjae Jo,
Yu-Seong Seo,
Myounghoon Lee,
Yousil Lee,
Chae Ryong Cho,
Jong-pil Kim,
Miyeon Cheon,
Jungseek Hwang,
Yong In Kim,
Young-Hoon Kim,
Young-Min Kim,
Aloysius Soon,
Myunghwan Choi,
Woo Seok Choi,
Se-Young Jeong,
Young Hee Lee
Abstract:
Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer t…
▽ More
Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer thickness. Grain boundary-free and atomically flat films prepared by atomic-sputtering epitaxy allow tailoring of the oxide layer with an abrupt interface via heat treatment with a suppressed temperature gradient. Color tuning of nearly full-color RGB indices is realized by precise control of oxide-layer thickness; our samples covered ~50.4% of the sRGB color space. The color of copper/copper oxide is realized by the reconstruction of the quantitative yield color from oxide pigment (complex dielectric functions of Cu2O) and light-layer interference (reflectance spectra obtained from the Fresnel equations) to produce structural color. We further demonstrate laser-oxide lithography with micron-scale linewidth and depth through local phase transformation to oxides embedded in the metal, providing spacing necessary for semiconducting transport and optoelectronics functionality.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Identification of Collapsed Carbon Nanotubes in High-Strength Fibres Spun from Compositionally Polydisperse Aerogels
Authors:
Maria Vila,
Seungki Hong,
Seunggyu Park,
Anastasiia Mikhalchan,
Bon-Cheol Ku,
Jun Yeon Hwang,
Juan J. Vilatela
Abstract:
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile prope…
▽ More
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile properties as reinforcing fibres. This work introduces cross-sectional transmission electron microscopy of FIB-milled samples as a way to univocally identify collapsed CNTs and to determine the full population of different CNTs in macroscopic fibers produced by spinning from floating catalyst chemical vapour deposition. We show that close proximity in bundles is a major driver for collapse and that CNT stoutness (number of layers/diameter), which dominates the collapse onset, is controlled by the growth promotor. Despite differences in decomposition route, different C precursors lead to similar distributions of the ratio layers/diameter. The synthesis conditions in this study give a maximum fraction of collapsed CNTs of 70$\%$ when using selenium as promotor, corresponding to an average of $0.25 layer/nm$.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
A translation of Maurice Philippson's "Principles of the Electrical Resistance of Living Tissue"
Authors:
James C. M. Hwang,
Olivia Peytral-Rieu
Abstract:
The impedance of one cubic centimeter of living tissues of potato and guinea pig were measured from 500 Hz to 3 MHz. In general, the magnitude of the impedance was found to monotonically decrease with increasing frequency. This implies that the membrane of each cell in the tissue acts like a capacitor, which is in parallel with a membrane resistance. The membrane resistance and capacitance togethe…
▽ More
The impedance of one cubic centimeter of living tissues of potato and guinea pig were measured from 500 Hz to 3 MHz. In general, the magnitude of the impedance was found to monotonically decrease with increasing frequency. This implies that the membrane of each cell in the tissue acts like a capacitor, which is in parallel with a membrane resistance. The membrane resistance and capacitance together are in series with a protoplasm resistance. Experimentally, it was observed that after the guinea pig died, the membrane resistance of its muscle decreased from 1.49 to 0.79 kilo-ohm while the protoplasm resistance remained around 0.11 kilo-ohm. By contrast, when the potato started to germinate, the protoplasm resistance decreased from 0.25 to 0.10 kilo-ohm, while its membrane resistance remained around 4 kilo-ohms.
△ Less
Submitted 28 October, 2020;
originally announced May 2021.
-
Direct Measurement of Curvature-Dependent Surface Tension in a Capillary-Condensed Alcohol Nanomeniscus
Authors:
Dohyun Kim,
Jongwoo Kim,
Jonggeun Hwang,
Dongha Shin,
Sangmin An,
Wonho Jhe
Abstract:
Surface tension is a key parameter for understanding nucleation from the very initial stage of phase transformation. Although surface tension has been predicted to vary with the curvature of the liquid-vapor interface, particularly at the large curvature of, e.g., the subnanometric critical nucleus, experimental study still remains challenging due to inaccessibility to such a small cluster. Here,…
▽ More
Surface tension is a key parameter for understanding nucleation from the very initial stage of phase transformation. Although surface tension has been predicted to vary with the curvature of the liquid-vapor interface, particularly at the large curvature of, e.g., the subnanometric critical nucleus, experimental study still remains challenging due to inaccessibility to such a small cluster. Here, by directly measuring the critical size of a single capillary-condensed nanomeniscus using atomic force microscopy, we address the curvature dependence of surface tension of alcohols and observe the surface tension is doubled for ethanol and n-propanol with the radius-of-curvature of ~ -0.46 nm. We also find that the interface of larger negative (positive) curvature exhibits the larger (smaller) surface tension, which evidently governs nucleation at ~ 1 nm scale, indicating more facilitated nucleation than normally expected. Such well characterized curvature effects contribute to better understanding and accurate analysis of nucleation occurring in various fields including material science and atmospheric science.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
The model reduction of the Vlasov-Poisson-Fokker-Planck system to the Poisson-Nernst-Planck system via the Deep Neural Network Approach
Authors:
Jae Yong Lee,
** Woo Jang,
Hyung Ju Hwang
Abstract:
The model reduction of a mesoscopic kinetic dynamics to a macroscopic continuum dynamics has been one of the fundamental questions in mathematical physics since Hilbert's time. In this paper, we consider a diagram of the diffusion limit from the Vlasov-Poisson-Fokker-Planck (VPFP) system on a bounded interval with the specular reflection boundary condition to the Poisson-Nernst-Planck (PNP) system…
▽ More
The model reduction of a mesoscopic kinetic dynamics to a macroscopic continuum dynamics has been one of the fundamental questions in mathematical physics since Hilbert's time. In this paper, we consider a diagram of the diffusion limit from the Vlasov-Poisson-Fokker-Planck (VPFP) system on a bounded interval with the specular reflection boundary condition to the Poisson-Nernst-Planck (PNP) system with the no-flux boundary condition. We provide a Deep Learning algorithm to simulate the VPFP system and the PNP system by computing the time-asymptotic behaviors of the solution and the physical quantities. We analyze the convergence of the neural network solution of the VPFP system to that of the PNP system via the Asymptotic-Preserving (AP) scheme. Also, we provide several theoretical evidence that the Deep Neural Network (DNN) solutions to the VPFP and the PNP systems converge to the a priori classical solutions of each system if the total loss function vanishes.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Statistical behaviour of self-similar structures in canonical wall turbulence
Authors:
**yul Hwang,
Jae Hwa Lee,
Hyung ** Sung
Abstract:
Townsend's attached-eddy hypothesis (AEH) provides a theoretical description of turbulence statistics in the logarithmic region in terms of coherent motions that are self-similar with the wall-normal distance (y). Here, we show the self-similar behaviour of turbulence motions contained within wall-attached structures of streamwise velocity fluctuations using the direct numerical simulation dataset…
▽ More
Townsend's attached-eddy hypothesis (AEH) provides a theoretical description of turbulence statistics in the logarithmic region in terms of coherent motions that are self-similar with the wall-normal distance (y). Here, we show the self-similar behaviour of turbulence motions contained within wall-attached structures of streamwise velocity fluctuations using the direct numerical simulation dataset of turbulent boundary layer, channel, and pipe flows ($Re_τ\approx 1000$) The physical sizes of the identified structures are geometrically self-similar in terms of height, and the associated turbulence intensity follows the logarithmic variation in all three flows. Moreover, the corresponding two-dimensional energy spectra are aligned along a linear relationship between the streamwise and spanwise wavelengths ($λ_x$ and $λ_z$, respectively) in the large-scale range ($12y < λ_x <$ 3--4$δ$), which is reminiscent of self-similarity. Consequently, one-dimensional spectra obtained by integrating the two-dimensional spectra over the self-similar range show some evidence for self-similar scaling $λ_x \sim λ_z$ and the possible existence of $k_x^{-1}$ and $k_z^{-1}$ scaling regions in a similar subrange. The present results reveal that the asymptotic behaviours can be obtained by identifying the self-similar coherent structures in canonical wall turbulence, albeit in low Reynolds number flows.
△ Less
Submitted 18 September, 2020;
originally announced September 2020.
-
Time-Reversal Symmetric ODE Network
Authors:
In Huh,
Eunho Yang,
Sung Ju Hwang,
**woo Shin
Abstract:
Time-reversal symmetry, which requires that the dynamics of a system should not change with the reversal of time axis, is a fundamental property that frequently holds in classical and quantum mechanics. In this paper, we propose a novel loss function that measures how well our ordinary differential equation (ODE) networks comply with this time-reversal symmetry; it is formally defined by the discr…
▽ More
Time-reversal symmetry, which requires that the dynamics of a system should not change with the reversal of time axis, is a fundamental property that frequently holds in classical and quantum mechanics. In this paper, we propose a novel loss function that measures how well our ordinary differential equation (ODE) networks comply with this time-reversal symmetry; it is formally defined by the discrepancy in the time evolutions of ODE networks between forward and backward dynamics. Then, we design a new framework, which we name as Time-Reversal Symmetric ODE Networks (TRS-ODENs), that can learn the dynamics of physical systems more sample-efficiently by learning with the proposed loss function. We evaluate TRS-ODENs on several classical dynamics, and find they can learn the desired time evolution from observed noisy and complex trajectories. We also show that, even for systems that do not possess the full time-reversal symmetry, TRS-ODENs can achieve better predictive performances over baselines.
△ Less
Submitted 6 January, 2021; v1 submitted 22 July, 2020;
originally announced July 2020.
-
Connectivity-informed Drainage Network Generation using Deep Convolution Generative Adversarial Networks
Authors:
Sung Eun Kim,
Yongwon Seo,
Junshik Hwang,
Hongkyu Yoon,
Jonghyun Lee
Abstract:
Stochastic network modeling is often limited by high computational costs to generate a large number of networks enough for meaningful statistical evaluation. In this study, Deep Convolutional Generative Adversarial Networks (DCGANs) were applied to quickly reproduce drainage networks from the already generated network samples without repetitive long modeling of the stochastic network model, Gibb's…
▽ More
Stochastic network modeling is often limited by high computational costs to generate a large number of networks enough for meaningful statistical evaluation. In this study, Deep Convolutional Generative Adversarial Networks (DCGANs) were applied to quickly reproduce drainage networks from the already generated network samples without repetitive long modeling of the stochastic network model, Gibb's model. In particular, we developed a novel connectivity-informed method that converts the drainage network images to the directional information of flow on each node of the drainage network, and then transform it into multiple binary layers where the connectivity constraints between nodes in the drainage network are stored. DCGANs trained with three different types of training samples were compared; 1) original drainage network images, 2) their corresponding directional information only, and 3) the connectivity-informed directional information. Comparison of generated images demonstrated that the novel connectivity-informed method outperformed the other two methods by training DCGANs more effectively and better reproducing accurate drainage networks due to its compact representation of the network complexity and connectivity. This work highlights that DCGANs can be applicable for high contrast images common in earth and material sciences where the network, fractures, and other high contrast features are important.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Trend to Equilibrium for the Kinetic Fokker-Planck Equation via the Neural Network Approach
Authors:
Hyung Ju Hwang,
** Woo Jang,
Hyeontae Jo,
Jae Yong Lee
Abstract:
The issue of the relaxation to equilibrium has been at the core of the kinetic theory of rarefied gas dynamics. In the paper, we introduce the Deep Neural Network (DNN) approximated solutions to the kinetic Fokker-Planck equation in a bounded interval and study the large-time asymptotic behavior of the solutions and other physically relevant macroscopic quantities. We impose the varied types of bo…
▽ More
The issue of the relaxation to equilibrium has been at the core of the kinetic theory of rarefied gas dynamics. In the paper, we introduce the Deep Neural Network (DNN) approximated solutions to the kinetic Fokker-Planck equation in a bounded interval and study the large-time asymptotic behavior of the solutions and other physically relevant macroscopic quantities. We impose the varied types of boundary conditions including the inflow-type and the reflection-type boundaries as well as the varied diffusion and friction coefficients and study the boundary effects on the asymptotic behaviors. These include the predictions on the large-time behaviors of the pointwise values of the particle distribution and the macroscopic physical quantities including the total kinetic energy, the entropy, and the free energy. We also provide the theoretical supports for the pointwise convergence of the neural network solutions to the \textit{a priori} analytic solutions. We use the library \textit{PyTorch}, the activation function \textit{tanh} between layers, and the \textit{Adam} optimizer for the Deep Learning algorithm.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Scientific opportunies for bERLinPro 2020+, report with ideas and conclusions from bERLinProCamp 2019
Authors:
Thorsten Kamps,
Michael Abo-Bakr,
Andreas Adelmann,
Kevin Andre,
Deepa Angal-Kalinin,
Felix Armborst,
Andre Arnold,
Michaela Arnold,
Raymond Amador,
Stephen Benson,
Yulia Choporova,
Illya Drebot,
Ralph Ernstdorfer,
Pavel Evtushenko,
Kathrin Goldammer,
Andreas Jankowiak,
Georg Hofftstaetter,
Florian Hug,
Ji-Gwang Hwang,
Lee Jones,
Julius Kuehn,
Jens Knobloch,
Bettina Kuske,
Andre Lampe,
Sonal Mistry
, et al. (16 additional authors not shown)
Abstract:
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL…
▽ More
The Energy Recovery Linac (ERL) paradigm offers the promise to generate intense electron beams of superior quality with extremely small six-dimensional phase space for many applications in the physical sciences, materials science, chemistry, health, information technology and security. Helmholtz-Zentrum Berlin started in 2010 an intensive R\&D programme to address the challenges related to the ERL as driver for future light sources by setting up the bERLinPro (Berlin ERL Project) ERL with 50 MeV beam energy and high average current. The project is close to reach its major milestone in 2020, acceleration and recovery of a high brightness electron beam.
The goal of bERLinProCamp 2019 was to discuss scientific opportunities for bERLinPro 2020+. bERLinProCamp 2019 was held on Tue, 17.09.2019 at Helmholtz-Zentrum Berlin, Berlin, Germany. This paper summarizes the main themes and output of the workshop.
△ Less
Submitted 8 January, 2020; v1 submitted 2 October, 2019;
originally announced October 2019.
-
Universal light-guiding geometry for high-nonlinear resonators having molecular-scale roughness
Authors:
Dae-Gon Kim,
Sangyoon Han,
Joonhyuk Hwang,
In Hwan Do,
Dongin Jeong,
Ji-Hun Lim,
Yong-Hoon Lee,
Muhan Choi,
Yong-Hee Lee,
Duk-Yong Choi,
Hansuek Lee
Abstract:
By providing an effective way to leverage nonlinear phenomena in chip-scale, high-Q optical resonators have induced the recent advances of on-chip photonics represented by micro-combs and ultra-narrow linewidth lasers. These achievements mainly relying on Si, SiO$_{2}$, and Si$_{3}$N$_{4}$ are expected to be further improved by introducing new materials having higher nonlinearity. However, establi…
▽ More
By providing an effective way to leverage nonlinear phenomena in chip-scale, high-Q optical resonators have induced the recent advances of on-chip photonics represented by micro-combs and ultra-narrow linewidth lasers. These achievements mainly relying on Si, SiO$_{2}$, and Si$_{3}$N$_{4}$ are expected to be further improved by introducing new materials having higher nonlinearity. However, establishing fabrication processes to shape a new material into the resonator geometries having extremely smooth surfaces on a chip has been a challenging task. Here we describe a universal method to implement high-Q resonators with any materials which can be deposited in high vacuum. This approach, by which light-guiding cores having surface roughness in molecular-scale is automatically defined along the prepatterned platform structures during the deposition, is verified with As$_{2}$S$_{3}$, a typical chalcogenide glass of high-nonlinearity. The Q-factor of the developed resonator is 14.4 million approaching the loss of chalcogenide fibers, which is measured in newly proposed tunable waveguide-to-resonator coupling scheme with high ideality. Lasing by stimulated Brillouin process is demonstrated with threshold power of 0.53 mW which is 100 times lower than the previous record based on chalcogenide glasses. This approach paves the way for bringing various materials of distinguished virtues to the on-chip domain while kee** the loss performance comparable to that of bulk form.
△ Less
Submitted 30 September, 2019;
originally announced September 2019.
-
An In Situ Surface-Enhanced Infrared Absorption Spectroscopy Study of Electrochemical CO2 Reduction: Selectivity Dependence on Surface C-Bound and O-Bound Reaction Intermediates
Authors:
Yu Katayama,
Francesco Nattino,
Livia Giordano,
Jonathan Hwang,
Reshma R. Rao,
Oliviero Andreussi,
Nicola Marzari,
Yang Shao-Horn
Abstract:
The CO_{2} electro-reduction reaction (CORR) is a promising avenue to convert greenhouse gases into high-value fuels and chemicals, in addition to being an attractive method for storing intermittent renewable energy. Although polycrystalline Cu surfaces have long known to be unique in their capabilities of catalyzing the conversion of CO_{2} to higher-order C1 and C2 fuels, such as hydrocarbons (C…
▽ More
The CO_{2} electro-reduction reaction (CORR) is a promising avenue to convert greenhouse gases into high-value fuels and chemicals, in addition to being an attractive method for storing intermittent renewable energy. Although polycrystalline Cu surfaces have long known to be unique in their capabilities of catalyzing the conversion of CO_{2} to higher-order C1 and C2 fuels, such as hydrocarbons (CH_{4}, C_{2}H_{4} etc.) and alcohols (CH_{3}OH, C_{2}H_{5}OH), product selectivity remains a challenge. In this study, we select three metal catalysts (Pt, Au, Cu) and apply in situ surface enhanced infrared absorption spectroscopy (SEIRAS) and ambient-pressure X-ray photoelectron spectroscopy (APXPS), coupled to density-functional theory (DFT) calculations, to get insight into the reaction pathway for the CORR. We present a comprehensive reaction mechanism for the CORR, and show that the preferential reaction pathway can be rationalized in terms of metal-carbon (M-C) and metal-oxygen (M-O) affinity. We show that the final products are determined by the configuration of the initial intermediates, C-bound and O-bound, which can be obtained from CO_{2} and (H)CO_{3}, respectively. C1 hydrocarbons are produced via OCH_{3, ad} intermediates obtained from O-bound CO_{3, ad} and require a catalyst with relatively high affinity for O-bound intermediates. Additionally, C2 hydrocarbon formation is suggested to result from the C-C coupling between C-bound CO_{ad} and (H)CO_{ad}, which requires an optimal affinity for the C-bound species, so that (H)CO_{ad} can be further reduced without poisoning the catalyst surface. Our findings pave the way towards a design strategy for CORR catalysts with improved selectivity, based on this experimental/theoretical reaction mechanisms that have been identified.
△ Less
Submitted 25 April, 2019;
originally announced April 2019.
-
Inverted Scanning Microwave Microscope for In Vitro Imaging and Characterization of Biological Cells
Authors:
Marco Farina,
Xin **,
Gianluca Fabi,
Eleonora Pavoni,
Andrea di Donato,
Davide Mencarelli,
Antonio Morini,
Francesco Piacenza,
Richard Al Hadi,
Yan Zhao,
Tiziana Pietrangelo,
Xuanhong Cheng,
James C. M. Hwang
Abstract:
This paper presents for the first time an innovative instrument called an inverted scanning microwave microscope (iSMM), which is capable of noninvasive and label-free imaging and characterization of intracellular structures of a live cell on the nanometer scale. In particular, the iSMM is sensitive to not only surface structures, but also ectromagnetic properties up to one micrometer below the su…
▽ More
This paper presents for the first time an innovative instrument called an inverted scanning microwave microscope (iSMM), which is capable of noninvasive and label-free imaging and characterization of intracellular structures of a live cell on the nanometer scale. In particular, the iSMM is sensitive to not only surface structures, but also ectromagnetic properties up to one micrometer below the surface. Conveniently, the iSMM can be constructed through straightforward conversion of any scanning probe microscope, such as the atomic force microscope or the scanning tunneling microscope, with a simple metal probe to outperform traditional SMM in terms of ruggedness, and width, sensitivity and dynamic range. By contrast, the application of the traditional SMM to date has been limited to mainly surface physics and semiconductor technology, because the traditional SMM requires a fragile and expensive probe and is incompatible with saline solution or live biological cells.
△ Less
Submitted 13 March, 2019; v1 submitted 11 March, 2019;
originally announced March 2019.
-
Electron-Scale Dynamics of the Diffusion Region during Symmetric Magnetic Reconnection in Space
Authors:
R. B. Torbert,
J. L. Burch,
T. D. Phan,
M. Hesse,
M. R. Argall,
J. Shuster,
R. E. Ergun,
L. Alm,
R. Nakamura,
K. Genestreti,
D. J. Gershman,
W. R. Paterson,
D. L. Turner,
I. Cohen,
B. L. Giles,
C. J. Pollock,
S. Wang,
L. -J. Chen,
Julia Stawarz,
J. P. Eastwood,
K. - J. Hwang,
C. Farrugia,
I. Dors,
H. Vaith,
C. Mouikis
, et al. (24 additional authors not shown)
Abstract:
Magnetic reconnection is an energy conversion process important in many astrophysical contexts including the Earth's magnetosphere, where the process can be investigated in-situ. Here we present the first encounter of a reconnection site by NASA's Magnetospheric Multiscale (MMS) spacecraft in the magnetotail, where reconnection involves symmetric inflow conditions. The unprecedented electron-scale…
▽ More
Magnetic reconnection is an energy conversion process important in many astrophysical contexts including the Earth's magnetosphere, where the process can be investigated in-situ. Here we present the first encounter of a reconnection site by NASA's Magnetospheric Multiscale (MMS) spacecraft in the magnetotail, where reconnection involves symmetric inflow conditions. The unprecedented electron-scale plasma measurements revealed (1) super-Alfvenic electron jets reaching 20,000 km/s, (2) electron meandering motion and acceleration by the electric field, producing multiple crescent-shaped structures, (3) spatial dimensions of the electron diffusion region implying a reconnection rate of 0.1-0.2. The well-structured multiple layers of electron populations indicate that, despite the presence of turbulence near the reconnection site, the key electron dynamics appears to be largely laminar.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Wall-attached structures of velocity fluctuations in a turbulent boundary layer
Authors:
**yul Hwang,
Hyung ** Sung
Abstract:
Wall turbulence is a ubiquitous phenomenon in nature and engineering application, yet predicting such turbulence is difficult due to its complexity. High-Reynolds-number turbulence, which includes most practical flows, is particularly complicated because of its wide range of scales. Although the attached-eddy hypothesis postulated by Townsend can be used to predict turbulence intensities and serve…
▽ More
Wall turbulence is a ubiquitous phenomenon in nature and engineering application, yet predicting such turbulence is difficult due to its complexity. High-Reynolds-number turbulence, which includes most practical flows, is particularly complicated because of its wide range of scales. Although the attached-eddy hypothesis postulated by Townsend can be used to predict turbulence intensities and serves as a unified theory for the asymptotic behaviors of turbulence, the presence of attached structures has not been confirmed.Here, we demonstrate the logarithmic region of turbulence intensity by identifying wall-attached structures of velocity fluctuations ($u_i$) through direct numerical simulation of a moderate-Reynolds-number boundary layer ($Re_τ\approx 1000$). The wall-attached structures are self-similar with respect to their heights ($l_y$), and in particular the population density of the streamwise component ($u$) scales inversely with $l_y$, which is reminiscent of the hierarchy of attached eddies. The turbulent intensities contained within the wall-parallel components ($u$ and $w$) exhibit the logarithmic behavior. The tall attached structures ($l_y^+ > 100$) of $u$ are composed of multiple uniform momentum zones (UMZs) with a long streamwise extent, whereas those of the cross-stream components ($v$ and $w$) are relatively short with a comparable width, suggesting the presence of tall vortical structures associated with multiple UMZs. The magnitudes of the near-wall peak observed in the streamwise turbulent intensity increase with increasing $l_y$, reflecting nested hierarchies of the attached $u$ structures. These findings suggest that the identified structures are prime candidates for Townsend's attached-eddy hypothesis and serve as cornerstones for understanding the multiscale phenomena of high-Reynolds-number boundary layers.
△ Less
Submitted 30 April, 2018;
originally announced April 2018.
-
Large-Scale Fabrication of RF MOSFETs on Liquid-Exfoliated MoS2
Authors:
Kuanchen Xiong,
Lei Li,
Asher Madjar,
James C. M. Hwang,
Zhaoyang Lin,
Yu Huang,
Xiangfeng Duan,
Alexander Goritz,
Matthias Wietstruck,
Mehmet Kaynak
Abstract:
For the first time, thousands of RF MOSFETs were batch-fabricated on liquid-exfoliated MoS2 below 300 °C with nearly 100% yield. The large-scale fabrication with high yield allowed the average performance instead of the best performance to be reported. The DC performance of these devices were typical, but the RF performance, enabled by buried gates and on the order of 100 MHz, was reported for the…
▽ More
For the first time, thousands of RF MOSFETs were batch-fabricated on liquid-exfoliated MoS2 below 300 °C with nearly 100% yield. The large-scale fabrication with high yield allowed the average performance instead of the best performance to be reported. The DC performance of these devices were typical, but the RF performance, enabled by buried gates and on the order of 100 MHz, was reported for the first time for liquid-exfoliated MoS2. To resolve the dilemma of thin vs. thick films, gate recess was used on 20-nm thick films to improve the gate control while kee** the contact resistance lower than that on 10-nm films. These innovations may enable thin-film transistors to operate in the microwave range.
△ Less
Submitted 27 March, 2018;
originally announced March 2018.
-
Rugged HBT Class-C Power Amplifiers with Base-Emitter Clam**
Authors:
Xi Luo,
Subrata Halder,
James C. M. Hwang
Abstract:
The ruggedness of HBT Class-C power amplifiers was improved by adding an anti-parallel diode to the amplifier input to limit the negative swing of the base-emitter voltage. The improved amplifier could withstand 3:1 instead of 2:1 mismatch in CW operation, and 2.5:1 instead of 1.5:1 mismatch in pulse operation. In contrast to other approaches with emitter ballast, active feedback, or electrostatic…
▽ More
The ruggedness of HBT Class-C power amplifiers was improved by adding an anti-parallel diode to the amplifier input to limit the negative swing of the base-emitter voltage. The improved amplifier could withstand 3:1 instead of 2:1 mismatch in CW operation, and 2.5:1 instead of 1.5:1 mismatch in pulse operation. In contrast to other approaches with emitter ballast, active feedback, or electrostatic discharge protection circuits, the present approach is simple to implement and has negligible impact on overall amplifier output power, gain or efficiency.
△ Less
Submitted 27 July, 2017;
originally announced August 2017.
-
The effect of time-varying flow-shear on the nonlinear stability of the boundary of magnetized toroidal plasmas
Authors:
Youngmin Oh,
Hyung Ju Hwang,
Michael Leconte,
Gunsu S. Yun
Abstract:
We propose a phenomenological yet very general model in a form of generalized complex Ginzburg-Landau equation to understand the dynamics of the quasi-periodic fluid instabilities (called edge-localized modes) in the boundary of toroidal magnetized high-temperature plasmas. The model reproduces key dynamical features of the boundary instabilities observed in the high-confinement state plasmas on t…
▽ More
We propose a phenomenological yet very general model in a form of generalized complex Ginzburg-Landau equation to understand the dynamics of the quasi-periodic fluid instabilities (called edge-localized modes) in the boundary of toroidal magnetized high-temperature plasmas. The model reproduces key dynamical features of the boundary instabilities observed in the high-confinement state plasmas on the KSTAR tokamak, including quasi-steady states characterized by field-aligned filamentary eigenmodes, transitions between different eigenmodes, and rapid transition to non-modal filamentary structure prior to the relaxation. It is found that the inclusion of time-varying perpendicular sheared flow is crucial for reproducing the observed dynamical features.
△ Less
Submitted 23 September, 2017; v1 submitted 14 August, 2017;
originally announced August 2017.
-
Scaling and High-Frequency Performance of AlN/GaN HEMTs
Authors:
Xi Luo,
Subrata Halder,
Walter R. Curtice,
James C. M. Hwang,
Kelson D. Chabak,
Dennis E. Walker, Jr.,
Amir M. Dabiran
Abstract:
Small- and large-signal RF characteristics were measured on AlN GaN HEMTs with 80-160 nm gate length and 100-300 μm width. Consistent with the literature, current-gain cut-off frequency and maximum frequency of oscillation were found to increase with inverse gate length and independent of gate width. For the first time, output power and efficiency were reported at the high end of Xband, and were c…
▽ More
Small- and large-signal RF characteristics were measured on AlN GaN HEMTs with 80-160 nm gate length and 100-300 μm width. Consistent with the literature, current-gain cut-off frequency and maximum frequency of oscillation were found to increase with inverse gate length and independent of gate width. For the first time, output power and efficiency were reported at the high end of Xband, and were comparable to the best reported at 2 GHz and insensitive to gate length or width. These results suggest that the AlN/GaN HEMTs can be further scaled for even higher frequency and higher power performance.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Intermodulation distortion of actuated MEMS capacitive switches
Authors:
Xi Luo,
Yaqing Ning,
David Molinero,
Cristiano Palego,
James CM Hwang,
Charles L Goldsmith
Abstract:
For the first time, intermodulation distortion of micro-electromechanical capacitive switches in the actuated state was analyzed both theoretically and experimentally. The distortion, although higher than that of switches in the suspended state, was found to decrease with increasing bias voltage but to depend weakly on modulation frequencies between 55 kHz and 1.1 MHz. This dependence could be exp…
▽ More
For the first time, intermodulation distortion of micro-electromechanical capacitive switches in the actuated state was analyzed both theoretically and experimentally. The distortion, although higher than that of switches in the suspended state, was found to decrease with increasing bias voltage but to depend weakly on modulation frequencies between 55 kHz and 1.1 MHz. This dependence could be explained by the orders-of-magnitude increase of the spring constant when the switches were actuated. Additionally, the analysis suggested that increasing the spring constant and decreasing the contact roughness could improve the linearity of actuated switches. These results are critical to micro-electromechanical capacitive switches used in tuners, filters, phase shifters, etc. where the linearity of both suspended and actuated states are critical.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
Modulation-doped beta-(Al0.2Ga0.8)2O3/Ga2O3 Field-Effect Transistor
Authors:
Sriram Krishnamoorthy,
Zhanbo Xia,
Chandan Joishi,
Yuewei Zhang,
Joe McGlone,
Jared Johnson,
Mark Brenner,
Aaron R. Arehart,
**woo Hwang,
Saurabh Lodha,
Siddharth Rajan
Abstract:
Modulation-doped heterostructures are a key enabler for realizing high mobility and better scaling properties for high performance transistors. We report the realization of modulation-doped two-dimensional electron gas (2DEG) at beta(Al0.2Ga0.8)2O3/ Ga2O3 heterojunction using silicon delta do**. The formation of a 2DEG was confirmed using capacitance voltage measurements. A modulation-doped 2DEG…
▽ More
Modulation-doped heterostructures are a key enabler for realizing high mobility and better scaling properties for high performance transistors. We report the realization of modulation-doped two-dimensional electron gas (2DEG) at beta(Al0.2Ga0.8)2O3/ Ga2O3 heterojunction using silicon delta do**. The formation of a 2DEG was confirmed using capacitance voltage measurements. A modulation-doped 2DEG channel was used to realize a modulation-doped field-effect transistor. The demonstration of modulation do** in the beta-(Al0.2Ga0.8)2O3/ Ga2O3 material system could enable heterojunction devices for high performance electronics.
△ Less
Submitted 28 June, 2017;
originally announced June 2017.
-
Mathematical analysis of long-time behavior of magnetized fluid instabilities with shear flow
Authors:
Youngmin Oh,
Gunsu S. Yun,
Hyung Ju Hwang
Abstract:
We study a complex Ginzburg-Landau (GL) type model related to fluid instabilities in the boundary of magnetized toroidal plasmas (called edge-localized modes) with a prescribed shear flow on the Neumann boundary condition. We obtain the following universal results for the model in a one-dimensional interval. First, if the shear is weak, there is a unique linearly stable steady-state perturbed from…
▽ More
We study a complex Ginzburg-Landau (GL) type model related to fluid instabilities in the boundary of magnetized toroidal plasmas (called edge-localized modes) with a prescribed shear flow on the Neumann boundary condition. We obtain the following universal results for the model in a one-dimensional interval. First, if the shear is weak, there is a unique linearly stable steady-state perturbed from the nonzero constant steady-state corresponding to the zero shear case. Second, if the shear is strong, there is no plausible steady-state except the trivial zero solution in the interval. With the help of these results and the existence of global attractors, we can dramatically reduce the number of cases for the long-time behavior of a solution in the model.
△ Less
Submitted 25 June, 2017;
originally announced June 2017.
-
Scanning Microwave Microscopy of Aluminum CMOS Interconnect Lines Buried in Oxide and Water
Authors:
Xin **,
Kuanchen Xiong,
Roderick Marstell,
Nicholas C. Strandwitz,
James C. M. Hwang,
Marco Farina,
Alexander Göritz,
Matthias Wietstruck,
Mehmet Kaynak
Abstract:
Using a scanning microwave microscope, we imaged in water aluminum interconnect lines buried in aluminum and silicon oxides fabricated through a state-of-the-art 0.13 um SiGe BiCMOS process. The results were compared with that obtained by using atomic force microscopy both in air and water. It was found the images in water was degraded by only approximately 60% from that in air.
Using a scanning microwave microscope, we imaged in water aluminum interconnect lines buried in aluminum and silicon oxides fabricated through a state-of-the-art 0.13 um SiGe BiCMOS process. The results were compared with that obtained by using atomic force microscopy both in air and water. It was found the images in water was degraded by only approximately 60% from that in air.
△ Less
Submitted 22 June, 2017;
originally announced June 2017.
-
Reflective Metal/Semiconductor Tunnel Junctions for Hole Injection in AlGaN UV LEDs
Authors:
Yuewei Zhang,
Sriram Krishnamoorthy,
Fatih Akyol,
Jared M. Johnson,
Andrew A. Allerman,
Michael W. Moseley,
Andrew M. Armstrong,
**woo Hwang,
Siddharth Rajan
Abstract:
In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into p-AlGaN. The dependence of tunneling on the work function of the metal was investigated, and it was found that highly reflective Al metal layers can enable eff…
▽ More
In this work, we investigate the use of nanoscale polarization engineering to achieve efficient hole injection from metals to ultra-wide band gap AlGaN, and we show that UV-reflective aluminum (Al) layers can be used for hole injection into p-AlGaN. The dependence of tunneling on the work function of the metal was investigated, and it was found that highly reflective Al metal layers can enable efficient hole injection into p-AlGaN, despite the relatively low work function of Al. Efficient tunneling hole injection was confirmed by light emission at 326 nm with on-wafer peak external quantum efficiency and wall-plug efficiency of 2.65% and 1.55%, respectively. A high power density of 83.7 W/cm2 was measured at 1200 kA/cm2. The metal/semiconductor tunnel junction structure demonstrated here could provide significant advantages for efficient and manufacturable device topologies for high power UV emitters.
△ Less
Submitted 19 May, 2017;
originally announced May 2017.
-
Viscoelectric Effects in Nanochannel Electrokinetics
Authors:
Wei-Lun Hsu,
Dalton J. E. Harvie,
Malcolm R. Davidson,
David E. Dunstan,
Junho Hwang,
Hirofumi Daiguji
Abstract:
Electrokinetic transport behavior in nanochannels is different to that in larger sized channels. Specifically, molecular dynamics (MD) simulations in nanochannels have demonstrated two little understood phenomena which are not observed in microchannels, being: (i) the decrease of average electroosmotic mobility at high surface charge density, and (ii) the decrease of channel conductance at high sa…
▽ More
Electrokinetic transport behavior in nanochannels is different to that in larger sized channels. Specifically, molecular dynamics (MD) simulations in nanochannels have demonstrated two little understood phenomena which are not observed in microchannels, being: (i) the decrease of average electroosmotic mobility at high surface charge density, and (ii) the decrease of channel conductance at high salt concentrations, as the surface charge is increased. However, current electric double layer models do not capture these results. In this study we provide evidence that this inconsistency primarily arises from the neglect of the viscoelectric effect (being the increase of local viscosity near charged surfaces due to water molecule orientation) in conventional continuum models. It is shown that predictions of electroosmotic mobility in a slit nanochannel, derived from a viscoelectric-modified continuum model, are in quantitative agreement with previous MD simulation results. Furthermore, viscoelectric effects are found to dominate over ion steric and dielectric saturation effects in both electroosmotic and ion transport processes. Finally, we indicate that mechanisms of the previous MD-observed phenomena can be well-explained by the viscoelectric theory.
△ Less
Submitted 14 November, 2016; v1 submitted 8 November, 2016;
originally announced November 2016.
-
Stability Analysis of C-band 500-kW Klystron with Multi-cell Output cavity
Authors:
Jihyun Hwang,
Sung-Ju Park,
Won Namkung,
Moohyun Cho
Abstract:
A progogype 5-GHz 500-kW CW klystron (model E3762 provided by Toshiba Electron Tubes & Devices Co. Ltd.) has been operating as the RF source for the lower hybrid current drive (LHCD) system in the KSTAR tokamak. In order to investigate how the efficiency of the 5-GHz 500-kW CW klystron prototype could be enhanced, the cavity design study is being carried out with simulation code based on the main…
▽ More
A progogype 5-GHz 500-kW CW klystron (model E3762 provided by Toshiba Electron Tubes & Devices Co. Ltd.) has been operating as the RF source for the lower hybrid current drive (LHCD) system in the KSTAR tokamak. In order to investigate how the efficiency of the 5-GHz 500-kW CW klystron prototype could be enhanced, the cavity design study is being carried out with simulation code based on the main klystron operation parameters. This is being done by simulating klystron performances for various cavity parameters including the number of cavities, inter-cavity distance, and cavity tuning frequencies. The simulation has been done with the FCI (field charge interaction) code aided by a matlab script for scanning input parameters. Initial set of scan parameters was obtained by benchmarking the E3762 klystron. It was possible to obtain optimized design parameters with better efficiency for a cavity system adopting a multi-cell output cavity. However, the multi-cell output cavity is prone to produce a self-oscillation due to the prolonged (several half RF periods) beam-field interaction along its multiple gaps. We have checked the feasibility of the optimization by evaluating the stability of output cavity system. The stability is given by the ratio of a beam-loading conductance to the circuit conductance.
△ Less
Submitted 13 June, 2016;
originally announced June 2016.
-
High Current Density 2D/3D Esaki Tunnel Diodes
Authors:
Sriram Krishnamoorthy,
Edwin W. Lee II,
Choong Hee Lee,
Yuewei Zhang,
William D. McCulloch,
Jared M. Johnson,
**woo Hwang,
Yiying Wu,
Siddharth Rajan
Abstract:
The integration of two-dimensional materials such as transition metal dichalcogenides with bulk semiconductors offer interesting opportunities for 2D/3D heterojunction-based novel device structures without any constraints of lattice matching. By exploiting the favorable band alignment at the GaN/MoS2 heterojunction, an Esaki interband tunnel diode is demonstrated by transferring large area, Nb-dop…
▽ More
The integration of two-dimensional materials such as transition metal dichalcogenides with bulk semiconductors offer interesting opportunities for 2D/3D heterojunction-based novel device structures without any constraints of lattice matching. By exploiting the favorable band alignment at the GaN/MoS2 heterojunction, an Esaki interband tunnel diode is demonstrated by transferring large area, Nb-doped, p-type MoS2 onto heavily n-doped GaN. A peak current density of 446 A/cm2 with repeatable room temperature negative differential resistance, peak to valley current ratio of 1.2, and minimal hysteresis was measured in the MoS2/GaN non-epitaxial tunnel diode. A high current density of 1 kA/cm2 was measured in the Zener mode (reverse bias) at -1 V bias. The GaN/MoS2 tunnel junction was also modeled by treating MoS2 as a bulk semiconductor, and the electrostatics at the 2D/3D interface was found to be crucial in explaining the experimentally observed device characteristics.
△ Less
Submitted 1 June, 2016;
originally announced June 2016.
-
Reinforced magnetic properties of Ni-doped BiFeO3 ceramic
Authors:
J. S. Hwang,
Y. J. Yoo,
J. -H. Kang,
K. H. Lee,
B. W. Lee,
S. Y. Park,
Y. P. Lee
Abstract:
Multiferroic materials attract considerable interest because of the wide range of potential applications such as spintronic devices, data storage and sensors. As a strong candidate for the applications among the limited list of single-phase multiferroic materials, BiFeO3 (BFO) is a quite attractive material due to its multiferroic properties at room temperature (RT). However, BFO is widely known t…
▽ More
Multiferroic materials attract considerable interest because of the wide range of potential applications such as spintronic devices, data storage and sensors. As a strong candidate for the applications among the limited list of single-phase multiferroic materials, BiFeO3 (BFO) is a quite attractive material due to its multiferroic properties at room temperature (RT). However, BFO is widely known to have large leakage current and small spontaneous polarization due to the existence of crystalline defects such as oxygen vacancies. Furthermore, the magnetic moment of pure BFO is very weak owing to its antiferromagnetic nature. In this paper, the effects of Ni2+ substitution on the magnetic properties of bulk BFO have been investigated. BFO, and BiFe0.99Ni0.01O3, BiFe0.98Ni0.02O3 and BiFe0.97Ni0.03O3 (BFNO: Ni-doped BFO) ceramics were prepared by solid-state reaction and rapid sintering, and analyzed by structural and magnetic-property measurements. The leakage current density was measured at RT by using a standard ferroelectric tester. All the Ni-doped BFO exhibit the similar rhombohedral perovskite structure (R3c) to that of BFO. The magnetic properties of Ni-doped BFO are much enhanced with respect to BFO prepared at the same conditions, since the enhanced ferromagnetic interaction is caused by the Fe/Ni coupling.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
Thermodynamic Screening of Metal-Substituted MOFs for Carbon Capture
Authors:
Hyun Seung Koh,
Malay Kumar Rana,
**hyung Hwang,
Donald J. Siegel
Abstract:
Metal-organic frameworks (MOFs) have emerged as promising materials for carbon capture applications due to their high CO2 capacities and tunable properties. Amongst the many possible MOFs, metal-substituted compounds based on M-DOBDC and M-HKUST-1 have demonstrated amongst the highest CO2 capacities at the low pressures typical of flue gasses. Here we explore the possibility for additional perform…
▽ More
Metal-organic frameworks (MOFs) have emerged as promising materials for carbon capture applications due to their high CO2 capacities and tunable properties. Amongst the many possible MOFs, metal-substituted compounds based on M-DOBDC and M-HKUST-1 have demonstrated amongst the highest CO2 capacities at the low pressures typical of flue gasses. Here we explore the possibility for additional performance tuning of these compounds by computationally screening 36 metal-substituted variants (M = Be, Mg, Ca, Sr, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, W, Sn, and Pb) with respect to their CO2 adsorption enthalpy, $Δ$H (T=300K). Supercell calculations based on van der Waals density functional theory (vdW-DF) yield enthalpies in good agreement with experimental measurements, out-performing semi-empirical (DFT-D2) and conventional (LDA and GGA) functionals. Our screening identifies 13 compounds having $Δ$H values within the targeted thermodynamic window 40 $\leq$ $Δ$H $\leq$ 75 kJ/mol: 8 are based on M-DODBC (M=Mg, Ca, Sr, Sc, Ti, V, Mo, and W), and 5 on M-HKUST-1 (M= Be, Mg, Ca, Sr and Sc). Variations in the electronic structure and the geometry of the structural building unit are examined and used to rationalize trends in CO2 affinity. In particular, the partial charge on the coordinatively unsaturated metal sites is found to correlate with $Δ$H, suggesting that this property may be used as a simple performance descriptor. The ability to rapidly distinguish promising MOFs from those that are "thermodynamic dead-ends" will be helpful in guiding synthesis efforts towards promising compounds.
△ Less
Submitted 10 March, 2016;
originally announced March 2016.
-
Barriers to Integration: Physical Boundaries and the Spatial Structure of Residential Segregation
Authors:
Elizabeth Roberto,
Jackelyn Hwang
Abstract:
Despite modest declines in residential segregation levels since the Civil Rights Era, segregation remains a defining feature of the U.S. landscape. This study highlights the importance of considering physical barriers--features of the urban environment that disconnect locations--when measuring segregation. We use population and geographic data for 20 U.S. Rustbelt cities from the 2010 decennial ce…
▽ More
Despite modest declines in residential segregation levels since the Civil Rights Era, segregation remains a defining feature of the U.S. landscape. This study highlights the importance of considering physical barriers--features of the urban environment that disconnect locations--when measuring segregation. We use population and geographic data for 20 U.S. Rustbelt cities from the 2010 decennial census and a novel approach for measuring and analyzing segregation that incorporates the connectivity of roads and the excess distance imposed by physical barriers, such as highways, railroad tracks, and dead-end streets. We find that physical barriers divide urban space in ways that reinforce or exacerbate segregation, but there is substantial variation in the extent to which they increase segregation both within and across these cities and for different ethnoracial groups. By uncovering a new source of variation in the segregation experienced by city residents, the findings have implications for understanding the mechanisms that contribute to the persistence of segregation and the consequences of segregation.
△ Less
Submitted 20 September, 2017; v1 submitted 8 September, 2015;
originally announced September 2015.
-
A stable self-similar singularity of evaporating drops: ellipsoidal collapse to a point
Authors:
Marco A. Fontelos,
Seok Hyun Hong,
Hyung Ju Hwang
Abstract:
We study the problem of evaporating drops contracting to a point. Going back to Maxwell and Langmuir, the existence of a spherical solution for which evaporating drops collapse to a point in a self-similar manner is well established in the physical literature. The diameter of the drop follows the so-called $D^{2}$ law: the second power of the drop-diameter decays linearly in time. In this study we…
▽ More
We study the problem of evaporating drops contracting to a point. Going back to Maxwell and Langmuir, the existence of a spherical solution for which evaporating drops collapse to a point in a self-similar manner is well established in the physical literature. The diameter of the drop follows the so-called $D^{2}$ law: the second power of the drop-diameter decays linearly in time. In this study we provide a complete mathematical proof of this classical law. We prove that evaporating drops which are initially small perturbations of a sphere collapse to a point and the shape of the drop converges to a self-similar ellipsoid whose center, orientation, and semi-axes are determined by the initial shape.
△ Less
Submitted 15 December, 2014; v1 submitted 4 December, 2014;
originally announced December 2014.