Showing 1–19 of 19 results for author: Hussain, T

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Light-Metal Functionalized Boron Monoxide Monolayers as Efficient Hydrogen Storage Material: Insights from DFT Simulations

Authors: Wael Othman, Wadha Al Falasi, Tanveer Hussain, Nacir Tit

Abstract: Exceptionally high energy density by mass, natural abundance, widespread applications, and environmental friendliness make hydrogen (H2) a front-runner among clean energy options. However, the transition toward clean and renewable energy applications and the actualization of H2 economy require an efficient H2 storage medium. Material-based H2 storage is a viable option, as liquefaction and storage… ▽ More Exceptionally high energy density by mass, natural abundance, widespread applications, and environmental friendliness make hydrogen (H2) a front-runner among clean energy options. However, the transition toward clean and renewable energy applications and the actualization of H2 economy require an efficient H2 storage medium. Material-based H2 storage is a viable option, as liquefaction and storage under pressure require ultra-low temperature (-253°C) and tremendously high pressure (700 atm), respectively. In this work, we highlight the exceptional H2 storage capabilities of recently synthesized boron monoxide (BO) monolayer functionalized with light metals (Li, Na, K, and Ca). Our computational approach, employing density functional theory (DFT), ab initio molecular dynamics (AIMD), and thermodynamic analysis, reveals promising results. We found that up to four metal dopants (Li, Na, K, and Ca) can be adsorbed onto BO monolayer with significantly strong binding energies. Importantly, these bindings surpass the cohesive counterparts of the parental metal bulks, consequently stabilizing the crystal integrities, as confirmed by AIMD simulations. Each metal dopant on BO efficiently adsorbs multiple H2 molecules through electrostatic and van der Waals interactions. Interestingly, the metal-functionalized BO monolayers exhibit exceptionally high H2 gravimetric capacities up to 11.75 wt%. These promising capacities exceed the 5.50 wt% target set by the US Department of Energy for 2025. Following the same guidelines, the average binding energy per H2 molecule is within the range of -0.17 to -0.32 eV. The adsorption and desorption of H2 under practical working conditions are investigated by Langmuir adsorption model based statistical thermodynamic analysis, further supporting the potential of metal-functionalized BO monolayers for material-based H2 storage applications. △ Less

Submitted 22 February, 2024; originally announced February 2024.

Active learning-driven uncertainty reduction for in-flight particle characteristics of atmospheric plasma spraying of silicon

Authors: Halar Memon, Eskil Gjerde, Alex Lynam, Amiya Chowdhury, Geert De Maere, Grazziela Figueredo, Tanvir Hussain

Abstract: In this study, the first-of-its-kind use of active learning (AL) framework in thermal spray is adapted to improve the prediction accuracy of the in-flight particle characteristics and uses Gaussian Process (GP) ML model as a surrogate that generalises a global solution without necessarily involving physical mechanisms. The AL framework via the Bayesian Optimisation was utilised to: (a) reduce the… ▽ More In this study, the first-of-its-kind use of active learning (AL) framework in thermal spray is adapted to improve the prediction accuracy of the in-flight particle characteristics and uses Gaussian Process (GP) ML model as a surrogate that generalises a global solution without necessarily involving physical mechanisms. The AL framework via the Bayesian Optimisation was utilised to: (a) reduce the maximum uncertainty in the given database and (b) reduce local uncertainty around a contrived test point. The initial dataset consists of 26 atmospheric plasma spray (APS) parameters of silicon, aimed at ceramic matrix composites (CMCs) for the next generation of aerospace applications. The maximum uncertainty in the initial dataset was reduced by AL-driven identification of search spaces and conducting six guided spray trails in the identified search spaces. On average, a 52.9% improvement (error reduction) of RMSE and an R2 increase of 8.5% were reported on the predicted in-flight particle velocities and temperatures after the AL-driven optimisation. Furthermore, the Bayesian Optimisation around a contrived test point to predict the best possible characteristics resulted in a three-fold increase in prediction accuracy as compared to the non-optimised prediction. These AL-guided experimental validations not only increase the informativeness of the limited dataset but is adaptable for other thermal spraying methods without necessarily involving physical mechanisms and underlying mechanisms. The use of AL-driven optimisation may drive the thermal spraying towards resource-efficiency and may serve as the first step towards fully digital thermal spraying environments. △ Less

Submitted 8 September, 2023; originally announced September 2023.

Multilayer GZ/YSZ Thermal Barrier Coating from Suspension and Solution Precursor Plasma Spray

Authors: Kah Leng, Acacio Rincon Romero, Tanvir Hussain

Abstract: Gas turbines rely on thermal barrier coating (TBC) to thermally insulate the nickel-based superalloys underneath during operation; however, current TBCs, yttria stabilised zirconia (YSZ), limit the operating temperature and hence efficiency. At an operating temperature above 1200°C, YSZ is susceptible to failure due to phase instabilities and CMAS (Calcia-Magnesia-Alumina-Silica) attack. Gadoliniu… ▽ More Gas turbines rely on thermal barrier coating (TBC) to thermally insulate the nickel-based superalloys underneath during operation; however, current TBCs, yttria stabilised zirconia (YSZ), limit the operating temperature and hence efficiency. At an operating temperature above 1200°C, YSZ is susceptible to failure due to phase instabilities and CMAS (Calcia-Magnesia-Alumina-Silica) attack. Gadolinium zirconates (GZ) could overcome the drawback of YSZ, complementing each other with the multi-layer approach. This study introduces a novel approach utilising axial suspension plasma spray (ASPS) and axial solution precursor plasma spray (ASPPS) to produce a double-layer and a triple-layer TBCs with improved CMAS resistance. The former comprised suspension plasma sprayed GZ and YSZ layers while the latter had an additional dense layer deposited through a solution precursor to minimise the columnar gaps that pre-existed in the SPS GZ layer, thus resisting CMAS infiltration. Both coatings performed similarly in furnace cycling test (FCT) and burner rig testing (BRT). In the CMAS test, triple-layer coating showed better CMAS resistivity, as evidenced by the limited CMAS infiltration observed on the surface. △ Less

Submitted 5 June, 2023; originally announced June 2023.

Comments: 42 pages, 14 figures

SiC/YAG composite coatings by a novel liquid fuelled high velocity oxy-fuel suspension thermal spray

Authors: F. Venturi, A. Rincón Romero, T. Hussain

Abstract: Despite recent advances in suspension-based thermal spray techniques, there is still a need to widen the capability of available thermal spray setups to handle suspension to explore new compositions and improve the properties and performance of existing ones. In this work, a novel setup for injecting liquid-based feedstock in a liquid-fuelled high velocity oxy-fuel (HVOLF) thermal spray torch is p… ▽ More Despite recent advances in suspension-based thermal spray techniques, there is still a need to widen the capability of available thermal spray setups to handle suspension to explore new compositions and improve the properties and performance of existing ones. In this work, a novel setup for injecting liquid-based feedstock in a liquid-fuelled high velocity oxy-fuel (HVOLF) thermal spray torch is proposed, involving a new hardware ("Hybrid Nozzle") capable of injecting suspension radially and protecting the thermal spray flame from the environmental oxygen by inert gas shrouding. The new setup was used to deposit SiC/YAG composite coatings with 85 wt. % SiC content, and their wear performance was evaluated. An oxygen deficient environment was provided to the HVOLF flame, ensuring no or minimal (<2 wt. %) SiO_2 was formed in the coating during the spray, as confirmed by XRD. A good wear performance was observed at low load below 20 N, with a specific wear rate < 5 x 10^-5 mm^3/Nm, with the onset of wear mechanisms characteristic of ceramic wear in the brittle regime between 20 and 30 N. The future applicability of this novel setup to a range of oxidation- and heat-sensitive materials and composites offers the opportunity for new coating materials to be explored with suspension and solution precursor-based HVOLF thermal spray. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Molybdenum Carbide MXenes as Efficient Nanosensors Towards Selected Chemical Warfare Agents

Authors: Puspamitra Panigrahi, Yash Pal, Thanayut Kaewmaraya, Hyeonhu Bae, Noushin Nasiri, Tanveer Hussain

Abstract: There has been budding demand for the fast, reliable, inexpensive, non-invasive, sensitive, and compact sensors with low power consumption in various fields, such as defence, chemical sensing, health care, and safe environment monitoring units. Particularly, an efficient detection of chemical warfare agents (CWAs) is of great importance for the safety and security of the humans. Inspired by this,… ▽ More There has been budding demand for the fast, reliable, inexpensive, non-invasive, sensitive, and compact sensors with low power consumption in various fields, such as defence, chemical sensing, health care, and safe environment monitoring units. Particularly, an efficient detection of chemical warfare agents (CWAs) is of great importance for the safety and security of the humans. Inspired by this, we explored molybdenum carbide MXenes (Mo2CTx; Tx= O, F, S) as efficient sensors towards selected CWAs, such as arsine (AsH3), mustard gas (C4H8Cl2S), cyanogen chloride (NCCl), and phosgene (COCl2) both in aqueous and non-aqueous mediums. Our van der Waals corrected density functional theory (DFT) calculations reveal that the CWAs bind with Mo2CF2, and Mo2CS2 monolayers under strong chemisorption with binding energies in the range of -2.33 to -4.05 eV, whereas Mo2CO2 results in comparatively weak bindings of -0.29 to -0.58 eV. We further report the variations in the electronic properties, electrostatic potentials and work functions of Mo2CTx upon the adsorption of CWAs, which authenticate an efficient sensing mechanism. Statistical thermodynamic analysis is applied to explore the sensing properties of Mo2CTx at various of temperatures and pressures. We believe that our findings will pave the way to an innovative class of low-cost reusable sensors for the sensitive and selective detection of highly toxic CWAs in air as well as in aqueous media. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques

Authors: Daniel Tejero-Martin, Mingwen Bai, Jitendra Mata, Tanvir Hussain

Abstract: Porosity is a key parameter on thermal barrier coatings, directly influencing thermal conductivity and strain tolerance. Suspension high velocity oxy-fuel (SHVOF) thermal spraying enables the use of sub-micron particles as feedstock, increasing control over porosity and introducing nano-sized pores; these fine-scale porosities being challenging to measure. Neutron scattering represents a non-destr… ▽ More Porosity is a key parameter on thermal barrier coatings, directly influencing thermal conductivity and strain tolerance. Suspension high velocity oxy-fuel (SHVOF) thermal spraying enables the use of sub-micron particles as feedstock, increasing control over porosity and introducing nano-sized pores; these fine-scale porosities being challenging to measure. Neutron scattering represents a non-destructive technique, capable of studying porosity with a pore size range of 1 nm to 10 um, thanks to the combination of small-angle (SANS) and ultra-small-angle neutron scattering (USANS) techniques. Image Analysis (IA) on digital images allows for the study of porosity with a size above ~100 nm. In this work, two yttria-stabilised zirconia (ZrO2 with 8 wt.% Y2O3) suspensions were sprayed and heat treated at 1100, 1200, 1300 and 1400 °C for 72 h. For the first time in SHVOF 8YSZ, pore size distribution, total porosity and pore morphology were studied using SANS & USANS and IA to determine the effects of heat treatment. X-ray diffraction and micro-hardness measurements were performed to study the phase transformation, and its effects on the mechanical properties of the coating. The results show an abundant presence of nano-pores in the as-sprayed coatings, which are eliminated during heat treatment at 1100 °C; a transition from inter-splat lamellar pores to globular pores and the appearance of micro-cracks along with the accumulation of micro-strains associated with the phase transformation from the initial metastable tetragonal into tetragonal and cubic phases at 1200 °C. The phase transformation was completed at 1400 °C, with no presence of monoclinic phase △ Less

Submitted 15 October, 2020; originally announced October 2020.

A Review on Environmental Barrier Coatings: History, Current State of the Art and Future Developments

Authors: Daniel Tejero-Martin, Chris Bennett, Tanvir Hussain

Abstract: The increasing demand for more efficient and environmental-friendly gas turbines has driven the development of new strategies for material development. SiC/SiC ceramic matrix composites (CMCs) can fulfil the stringent requirements; however, they require protection from the operating environment and debris ingested during operation. Environmental barrier coatings (EBCs) are a protective measure to… ▽ More The increasing demand for more efficient and environmental-friendly gas turbines has driven the development of new strategies for material development. SiC/SiC ceramic matrix composites (CMCs) can fulfil the stringent requirements; however, they require protection from the operating environment and debris ingested during operation. Environmental barrier coatings (EBCs) are a protective measure to enable the CMCs to operate under harsh conditions. EBC-coated CMCs will enable an increased efficiency and reduced pollutant and CO2 emissions. In this review, the fundamentals of SiC/SiC ceramic matrix composites degradation in steam environments and under the presence of molten alkali salts, namely CaO-MgO-Al2O3-SiO2 (CMAS), are first presented. Then, a summary of EBCs along with a comprehensive summary of the current compositions and their interactions with steam and molten salts is presented. Finally, an overview of the latest research directions for the potential next generation of EBCs are outlined △ Less

Submitted 29 July, 2020; originally announced July 2020.

Radial Injection in Suspension High Velocity Oxy Fuel (S-HVOF) Thermal Spray of Graphene Nanoplatelets for Tribology

Authors: Federico Venturi, Tanvir Hussain

Abstract: Friction is a major issue in energy efficiency of any apparatus composed of moving mechanical parts, affecting durability and reliability. Graphene nanoplatelets (GNPs) are good candidates for reducing friction and wear, and suspension high velocity oxy-fuel (SHVOF) thermal spray is a promising technique for their scalable and fast deposition, but it can expose them to excessive heat. In this work… ▽ More Friction is a major issue in energy efficiency of any apparatus composed of moving mechanical parts, affecting durability and reliability. Graphene nanoplatelets (GNPs) are good candidates for reducing friction and wear, and suspension high velocity oxy-fuel (SHVOF) thermal spray is a promising technique for their scalable and fast deposition, but it can expose them to excessive heat. In this work, we explore radial injection of GNPs in SHVOF thermal spray as a means of reducing their interaction with the hot flame, while still allowing a high momentum transfer and effective deposition. Feedstock injection parameters, such as flowrate, injection angle and position, were studied using high-speed imaging and particles temperature and velocity monitoring at different flame powers using Accuraspray 4.0. Unlubricated ball-on-flat sliding wear tests against an alumina counterbody ball showed a friction coefficient reduction up to a factor 10 compared to the bare substrate, down to 0.07. The deposited layer of GNPs protects the underlying substrate by allowing low-friction dry sliding. A Transmission Electron Microscopy study showed GNPs preserved crystallinity after spray, and became amorphised and wrinkled upon wear. This study focused on GNPs but is relevant to other heat- and oxidation-sensitive materials such as polymers, nitrides and 2D materials. △ Less

Submitted 11 September, 2019; originally announced September 2019.

Splat formation and microstructure of solution precursor thermal sprayed Nb-doped titanium oxide coatings

Authors: Daniel Tejero-Martin, Zdenek Pala, Simon Rushworth, Tanvir Hussain

Abstract: Solution precursor thermal spray can become a breakthrough technology for the deposition of coatings with novel chemistries; however, the understanding of the process that the feedstock material undergoes is still poorly understood when compared to more traditional presentations (i.e. powder and suspension). In this paper, niobium-doped TiO2 coatings were deposited by solution precursor high veloc… ▽ More Solution precursor thermal spray can become a breakthrough technology for the deposition of coatings with novel chemistries; however, the understanding of the process that the feedstock material undergoes is still poorly understood when compared to more traditional presentations (i.e. powder and suspension). In this paper, niobium-doped TiO2 coatings were deposited by solution precursor high velocity oxy-fuel spraying, studying its microstructure and phase. It was reported that a lower flame temperature produced a highly porous coating, while the porosity was reduced at higher flame temperature. Investigation of the phase content showed that, contrary to our current understanding, a higher flame power implied an increase of the anatase phase content for solution precursor spray. Three methods were used: Rietveld refinement, peak height and peak area of the x-ray diffraction patterns. Additionally, single splats were analysed, showing that as the precursor travels through the flame, pyrolysis and sintering takes place to form the solid material. These results were used to derive a model of the physico-chemical transformation of the solution precursor. This work proves that solution precursor thermal spray is a promising technique for the deposition of doped ceramic coatings, being the microstructure and phase content controllable through the spraying parameters △ Less

Submitted 13 August, 2019; originally announced August 2019.

Forecasting Drought Using Multilayer Perceptron Artificial Neural Network Model

Authors: Zulifqar Ali, Ijaz Hussain, Muhammad Faisal, Hafiza Mamona Nazir, Tajammal Hussain, Muhammad Yousaf Shad, Alaa Mohamd Shoukry, Showkat Hussain Gani

Abstract: These days human beings are facing many environmental challenges due to frequently occurring drought hazards. It may have an effect on the countrys environment, the community, and industries. Several adverse impacts of drought hazard are continued in Pakistan, including other hazards. However, early measurement and detection of drought can provide guidance to water resources management for employi… ▽ More These days human beings are facing many environmental challenges due to frequently occurring drought hazards. It may have an effect on the countrys environment, the community, and industries. Several adverse impacts of drought hazard are continued in Pakistan, including other hazards. However, early measurement and detection of drought can provide guidance to water resources management for employing drought mitigation policies. In this paper, we used a multilayer perceptron neural network (MLPNN) algorithm for drought forecasting. We applied and tested MLPNN algorithm on monthly time series data of Standardized Precipitation Evapotranspiration Index (SPEI) for seventeen climatological stations located in Northern Area and KPK (Pakistan). We found that MLPNN has potential capability for SPEI drought forecasting based on performance measures (i.e., Mean Average Error (MAE), the coefficient of correlation R, and Root Mean Square Error (RMSE). Water resources and management planner can take necessary action in advance (e.g., in water scarcity areas) by using MLPNN model as part of their decision making. △ Less

Submitted 17 April, 2019; originally announced April 2019.

N-, B-, P-, Al-, As-, Ga-graphdiyne/graphyne lattices: First-principles investigation of mechanical, optical and electronic properties

Authors: B. Mortazavi, M. Shahrokhi, M. E. Madjet, T. Hussain, X. Zhuang, T. Rabczuk

Abstract: Graphdiyne and graphyne are carbon-based two-dimensional (2D) porous atomic lattices, with outstanding physics and excellent application prospects for advanced technologies, like nanoelectronics and energy storage systems. During the last year, B- and N-graphdiyne nanomembranes were experimentally realized. Motivated by the latest experimental advances, in this work we predicted novel N-, B-, P-,… ▽ More Graphdiyne and graphyne are carbon-based two-dimensional (2D) porous atomic lattices, with outstanding physics and excellent application prospects for advanced technologies, like nanoelectronics and energy storage systems. During the last year, B- and N-graphdiyne nanomembranes were experimentally realized. Motivated by the latest experimental advances, in this work we predicted novel N-, B-, P-, Al-, As-, Ga-graphdiyne/graphyne 2D lattices. We then conducted density functional theory simulations to obtain the energy minimized structures and explore the mechanical, thermal stability, electronic and optical characteristics of these novel porous nanosheets. Acquired theoretical results reveal that the predicted carbon-based lattices are thermally stable. It was moreover found that these novel 2D nanostructures can exhibit remarkably high tensile strengths or stretchability. The electronic structure analysis reveals semiconducting electronic character for the predicted monolayers. Moreover, the optical results indicate that the first absorption peaks of the imaginary part of the dielectric function for these novel porous lattices along the in-plane directions are in the visible, IR and near-IR (NIR) range of light. This work highlights the outstanding properties of graphdiyne/graphyne lattices and recommends them as promising candidates to design stretchable energy storage and nanoelectronics systems. △ Less

Submitted 6 February, 2019; originally announced February 2019.

Journal ref: Journal of Materials Chemistry C, 2019

Beyond traditional coatings, a review on thermal sprayed functional and smart coatings

Authors: Daniel Tejero-Martin, Milad Rezvani Rad, André McDonald, Tanvir Hussain

Abstract: Thermal spraying has been present for over a century, being greatly refined and optimised during this time, becoming nowadays a reliable and cost-efficient method to deposit thick coatings with a wide variety of feedstock materials and substrates. Thermal sprayed coatings have been successfully applied in fields such as aerospace or electricity production, becoming an essential component of today'… ▽ More Thermal spraying has been present for over a century, being greatly refined and optimised during this time, becoming nowadays a reliable and cost-efficient method to deposit thick coatings with a wide variety of feedstock materials and substrates. Thermal sprayed coatings have been successfully applied in fields such as aerospace or electricity production, becoming an essential component of today's industry. To overpass the traditional capabilities of those coatings, new functionalities and coherent responses are being integrated, opening the field of functional and smart coatings. The aim of this paper is to present a comprehensive review of the current state of functional and smart coatings produced using thermal spraying deposition. It will first describe the different thermal spraying technologies, with a focus on how different techniques achieve the thermal and kinetic energy required to form a coating, as well as the environment to which feedstock particles are exposed in terms of temperature and velocity. It will then deal with the state-of-the-art functional and smart coatings applied using thermal spraying techniques, with a discussion on the fundamentals on which the coatings are designed, the efficiency of its performance and the industrial applications, both current and potential. The inherent designing flexibility of thermal sprayed functional and smart coatings has been exploited to explore exciting new possibilities on many different fields. Applications such as anti-bacterial and anti-fouling coatings, superhydrophobic surfaces, electrical and heating devices for functional coatings and self-healing, self-lubricating and sensors for smart coatings are here presented and discussed. All these exciting developments pave the way for the numerous applications that are to come in the next decade, making the field of thermal sprayed coatings a unique opportunity for research. △ Less

Submitted 25 March, 2019; v1 submitted 13 November, 2018; originally announced November 2018.

Comments: 100 pages, 28 figures

Influence of KCl and HCl on a Laser Clad FeCrAl Alloy: In-Situ SEM and Controlled Environment High Temperature Corrosion

Authors: L. Reddy, M. Sattari, C. J. Davis, P. H. Shipway, M. Halvarsson, T. Hussain

Abstract: Increasing pressure on the power industry to reduce carbon emissions has led to increased research into the use of biomass feedstocks. This work investigates the effects of HCl and KCl, key species influencing biomass boiler corrosion, on a laser clad coating of the FeCrAl alloy Kanthal APMT. In-Situ SEM exposure of the coating at 450 oC for 1 h was performed to investigate the initial effects of… ▽ More Increasing pressure on the power industry to reduce carbon emissions has led to increased research into the use of biomass feedstocks. This work investigates the effects of HCl and KCl, key species influencing biomass boiler corrosion, on a laser clad coating of the FeCrAl alloy Kanthal APMT. In-Situ SEM exposure of the coating at 450 oC for 1 h was performed to investigate the initial effects of KCl on the corrosion process. The same coatings were exposed to 250 h exposures in both an air environment and a HCl rich environment. The influence of KCl was investigated in both. Evidence of a slow growing aluminium oxide was observed. It was found that HCl allowed chlorine based corrosion to occur suggesting it can interact from the gas phase. It was also observed that the presence of both HCl and KCl reduced the mass gain compared to KCl in an air environment. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Luminosity measurements for the R scan experiment at BESIII

Authors: M. Ablikim, M. N. Achasov, S. Ahmed, X. C. Ai, O. Albayrak, M. Albrecht, D. J. Ambrose, A. Amoroso, F. F. An, Q. An, J. Z. Bai, O. Bakina, R. Baldini Ferroli, Y. Ban, D. W. Bennett, J. V. Bennett, N. Berger, M. Bertani, D. Bettoni, J. M. Bian, F. Bianchi, E. Boger, I. Boyko, R. A. Briere, H. Cai , et al. (405 additional authors not shown)

Abstract: By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Bei**g Spectrometer (BESIII) at the Bei**g Electron-Positron Collider (BEPCII), the integrated luminosities have been measur… ▽ More By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Bei**g Spectrometer (BESIII) at the Bei**g Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements. △ Less

Submitted 11 February, 2017; originally announced February 2017.

Laser induced Zero-Group Velocity resonances in Transversely Isotropic cylinder

Authors: Jérôme Laurent, Daniel Royer, Takasar Hussain, Faiz Ahmad, Claire Prada

Abstract: The transient response of an elastic cylinder to a laser impact is studied. When the laser source is a line perpendicular to the cylinder axis, modes guided along the cylinder are generated. For a millimetric steel cylinder up to ten narrow resonances can be locally detected by laser interferometry below 8 MHz. Most of these resonances correspond to Zero-Group Velocity guided modes while a few oth… ▽ More The transient response of an elastic cylinder to a laser impact is studied. When the laser source is a line perpendicular to the cylinder axis, modes guided along the cylinder are generated. For a millimetric steel cylinder up to ten narrow resonances can be locally detected by laser interferometry below 8 MHz. Most of these resonances correspond to Zero-Group Velocity guided modes while a few others can be ascribed to thickness modes. We observe that the theory describing the propagation of elastic waves in an isotropic cylinder is not sufficient to precisely predict the resonance spectrum. In fact, the texture of such elongated structure manifest as elastic anisotropy. Thus, a transverse isotropic (TI) model is used to calculate the dispersion curves and compare them with the measured one, obtained by moving the source along the cylinder. The five elastic constants of a TI cylinder are adjusted leading to a good agreement between measured and theoretical dispersion curves. Then, all the resonance frequencies are satisfactorily identified. △ Less

Submitted 4 March, 2015; originally announced March 2015.

Comments: 23 pages, 7 figures, submitted to the JASA

Measurements of Baryon Pair Decays of $χ_{cJ}$ Mesons

Authors: M. Ablikim, M. N. Achasov, O. Albayrak, D. J. Ambrose, F. F. An, Q. An, J. Z. Bai, Y. Ban, J. Becker, J. V. Bennett, M. Bertani, J. M. Bian, E. Boger, O. Bondarenko, I. Boyko, R. A. Briere, V. Bytev, X. Cai, O. Cakir, A. Calcaterra, G. F. Cao, S. A. Cetin, J. F. Chang, G. Chelkov, G. Chen , et al. (326 additional authors not shown)

Abstract: Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$,… ▽ More Using 106 $\times 10^{6}$ $ψ^{\prime}$ decays collected with the BESIII detector at the BEPCII, three decays of $χ_{cJ}$ ($J=0,1,2$) with baryon pairs ($\llb$, $\ssb$, $\SSB$) in the final state have been studied. The branching fractions are measured to be $\cal{B}$$(χ_{c0,1,2}\rightarrowΛ\barΛ) =(33.3 \pm 2.0 \pm 2.6)\times 10^{-5}$, $(12.2 \pm 1.1 \pm 1.1)\times 10^{-5}$, $(20.8 \pm 1.6 \pm 2.3)\times 10^{-5}$; $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{0}\barΣ^{0})$ = $(47.8 \pm 3.4 \pm 3.9)\times 10^{-5}$, $(3.8 \pm 1.0 \pm 0.5)\times 10^{-5}$, $(4.0 \pm 1.1 \pm 0.5) \times 10^{-5}$; and $\cal{B}$$(χ_{c0,1,2}\rightarrowΣ^{+}\barΣ^{-})$ = $(45.4 \pm 4.2 \pm 3.0)\times 10^{-5}$, $(5.4 \pm 1.5 \pm 0.5)\times 10^{-5}$, $(4.9 \pm 1.9 \pm 0.7)\times 10^{-5}$, where the first error is statistical and the second is systematic. Upper limits on the branching fractions for the decays of $χ_{c1,2}\rightarrowΣ^{0}\barΣ^{0}$, $Σ^{+}\barΣ^{-}$, are estimated to be $\cal{B}$$(χ_{c1}\rightarrowΣ^{0}\barΣ^{0}) < 6.2\times 10^{-5}$, $\cal{B}$$(χ_{c2}\rightarrowΣ^{0}\barΣ^{0}) < 6.5\times 10^{-5}$, $\cal{B}$$(χ_{c1}\rightarrowΣ^{+}\barΣ^{-}) < 8.7\times 10^{-5}$ and $\cal{B}$$(χ_{c2}\rightarrowΣ^{+}\barΣ^{-}) < 8.8\times 10^{-5}$ at the 90% confidence level. △ Less

Submitted 4 March, 2013; v1 submitted 9 November, 2012; originally announced November 2012.

Comments: 13 pages, 7 figures, 3 tables

Journal ref: Phys. Rev. D 87, 032007 (2013)

Polylithiated (OLi2) functionalized graphane as a potential hydrogen storage material

Authors: Tanveer Hussain, Tuhina Adit Maark, Abir De Sarkar, Rajeev Ahuja

Abstract: Hydrogen storage capacity, stability, bonding mechanism and the electronic structure of polylithiated molecules (OLi2) functionalized graphane (CH) has been studied by means of first principle density functional theory (DFT). Molecular dynamics (MD) have confirmed the stability, while Bader charge analysis describe the bonding mechanism of OLi2 with CH. The binding energy of OLi2 on CH sheet has b… ▽ More Hydrogen storage capacity, stability, bonding mechanism and the electronic structure of polylithiated molecules (OLi2) functionalized graphane (CH) has been studied by means of first principle density functional theory (DFT). Molecular dynamics (MD) have confirmed the stability, while Bader charge analysis describe the bonding mechanism of OLi2 with CH. The binding energy of OLi2 on CH sheet has been found to be large enough to ensure its uniform distribution without any clustering. It has been found that each OLi2 unit can adsorb up to six H2 molecules resulting into a storage capacity of 12.90 wt% with adsorption energies within the range of practical H2 storage application. △ Less

Submitted 23 July, 2012; originally announced July 2012.

Comments: 11 pages, 4 figures, 1 table, Phys. Chem. Chem. Phys. (submitted)

Strain induced lithium functionalized graphane as a high capacity hydrogen storage material

Authors: Tanveer Hussain, Abir De Sarkar, Rajeev Ahuja

Abstract: Strain effects on the stability, electronic structure, and hydrogen storage capacity of lithium-doped graphane (CHLi) have been investigated by stateof-the art first principle density functional theory (DFT). Molecular dynamics MD) simulations have confirmed the stability of Li on graphane sheet when it is subject to 10% of tensile strain. Under biaxial asymmetric strain, the binding energy of Li… ▽ More Strain effects on the stability, electronic structure, and hydrogen storage capacity of lithium-doped graphane (CHLi) have been investigated by stateof-the art first principle density functional theory (DFT). Molecular dynamics MD) simulations have confirmed the stability of Li on graphane sheet when it is subject to 10% of tensile strain. Under biaxial asymmetric strain, the binding energy of Li of graphane (CH) sheet increases by 52% with respect to its bulk's cohesive energy. With 25% do** concentration of Li on CH sheet,the gravimetric density of hydrogen storage is found to reach up to 12.12wt%. The adsorption energies of H2 are found to be within the range of practical H2 storage applications. △ Less

Submitted 22 July, 2012; originally announced July 2012.

Comments: 13 pages, 7 figures, 1 table, Applied Physics Letters (Under Review)