-
Martian seismic anisotropy underneath Elysium Planitia revealed by direct S wave splitting
Authors:
**g Shi,
Cunrui Han,
Tao Wang,
Chao Qi,
Han Chen,
Zhihan Yu,
Jiaqi Geng,
Minghan Yang,
Xu Wang,
Ling Chen,
Hejiu Hui
Abstract:
Seismic anisotropy, arising from the crystallographic or lattice-preferred orientation of anisotropic minerals or the shape-preferred orientation of melts or cracks, can establish a critical link between Mars's past evolution and its current state. So far, although seismic anisotropy in Mars has been proposed due to different velocities of vertically and horizontally polarized shear waves in the M…
▽ More
Seismic anisotropy, arising from the crystallographic or lattice-preferred orientation of anisotropic minerals or the shape-preferred orientation of melts or cracks, can establish a critical link between Mars's past evolution and its current state. So far, although seismic anisotropy in Mars has been proposed due to different velocities of vertically and horizontally polarized shear waves in the Martian crust, obtained from crustal converted waves, multiples, and surface waves recorded by the InSight seismometer, the evidence is plausible. Notably, the shear wave splitting, which stands out as a straight indicator of seismic anisotropy, has not been reported using marsquake records. In this study, we employ Low-frequency marsquakes detected by the InSight seismometer to reveal shear wave splitting in Mars. We find that the direct S waves of three marsquake recordings (S0173a, S0235b, and S1133c) with high signal-to-noise ratios exhibit the splitting pheonmenon. We rule out the possibility of apparent anisotropy through synthetic tests, affirming the presence of seismic anisotropy in Mars. The delay time (about 1.33 s on average) measured from the direct S wave splitting is too large to be solely attributed to the seismic anisotropy in the upper crust (0 - 10 km) beneath the InSight. Thus, seismic anisotropy in the deeper region of Mars is indispensable. Combined with other geophysical evidence near the InSight landing site, the strong seismic anisotropy observed in this study implies the porous crust with aligned cracks being greater than 10 km beneath the InSight and/or the presence of an active mantle plume underneath the Elysium Planitia of Mars.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Stimulated Emission Depletion (STED) Magnetic Particle Imaging
Authors:
Guang Jia,
Zhongwei Bian,
Tianshu Li,
Shi Bai,
Chenxing Hu,
Lixuan Zhao,
Peng Gao,
Tan** Li,
Hui Hui,
Jie Tian
Abstract:
Magnetic particle imaging (MPI) is an in-vivo imaging method to detect magnetic nanoparticles for blood vessel imaging and molecular target imaging. Compared with conventional molecular imaging devices (such as nuclear medicine imaging PET and SPECT), magnetic nanoparticles have longer storage periods than radionuclides without ionizing radiation. MPI has higher detection sensitivity compared with…
▽ More
Magnetic particle imaging (MPI) is an in-vivo imaging method to detect magnetic nanoparticles for blood vessel imaging and molecular target imaging. Compared with conventional molecular imaging devices (such as nuclear medicine imaging PET and SPECT), magnetic nanoparticles have longer storage periods than radionuclides without ionizing radiation. MPI has higher detection sensitivity compared with MRI. To accurately locate molecular probes in living organisms, high-resolution images are needed to meet the requirements of precision medicine. The spatial resolution of the latest domestic and international MPI equipment is 1-6 mm and has not yet met the requirements of medical imaging detection. We previously studied the spatial encoding technology based on pulsed square wave stimulation, which significantly improved the image resolution along the field free line (FFL) direction. This study proposes an innovative idea of high-resolution MPI based on stimulated emission depletion (STED) of magnetic nanoparticle signals. The stimulated emission was implemented by using cosine stimulation on FFL-based MPI scanner systems. The STED signal was generated by adding an offset magnetic field parallel to the FFL, which may form a donut-shaped focal spot or a regular Gaussian focal spot depending on the offset field strength. Focal spot modulation techniques and deconvolution algorithms were developed to improve image resolution.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Revisiting the apparent horizon finding problem with multigrid methods
Authors:
Hon-Ka Hui,
Lap-Ming Lin
Abstract:
Apparent horizon plays an important role in numerical relativity as it provides a tool to characterize the existence and properties of black holes on three-dimensional spatial slices in 3+1 numerical spacetimes. Apparent horizon finders based on different techniques have been developed. In this paper, we revisit the apparent horizon finding problem in numerical relativity using multigrid-based alg…
▽ More
Apparent horizon plays an important role in numerical relativity as it provides a tool to characterize the existence and properties of black holes on three-dimensional spatial slices in 3+1 numerical spacetimes. Apparent horizon finders based on different techniques have been developed. In this paper, we revisit the apparent horizon finding problem in numerical relativity using multigrid-based algorithms. We formulate the nonlinear elliptic apparent horizon equation as a linear Poisson-type equation with a nonlinear source, and solve it using a multigrid algorithm with Gauss-Seidel line relaxation. A fourth order compact finite difference scheme in spherical coordinates is derived and employed to reduce the complexity of the line relaxation operator to a tri-diagonal matrix inversion. The multigrid-based apparent horizon finder developed in this work is capable of locating apparent horizons in generic spatial hypersurfaces without any symmetries. The finder is tested with both analytic data, such as Brill-Lindquist multiple black hole data, and numerical data, including off-centered Kerr-Schild data and dynamical inspiraling binary black hole data. The obtained results are compared with those generated by the current fastest finder AHFinderDirect (Thornburg, Class. Quantum Grav. 21, 743, 2003), which is the default finder in the open source code Einstein Toolkit. Our finder performs comparatively in terms of accuracy, and starts to outperform AHFinderDirect at high angular resolutions (\sim 1^\circ) in terms of speed. Our finder is also more flexible to initial guess, as opposed to the Newton's method used in AHFinderDirect. This suggests that the multigrid algorithm provides an alternative option for studying apparent horizons, especially when high resolutions are needed.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Cryogenic Focus Measurement System for a Wide-Field Infrared Space Telescope
Authors:
Samuel S. Condon,
Stephen Padin,
James Bock,
Howard Hui,
Phillip Korngut,
Chi Nguyen,
Jordan Otsby
Abstract:
We describe a technique for measuring focus errors in a cryogenic, wide-field, near-infrared space telescope. The measurements are made with a collimator looking through a large vacuum window, with a reflective cold filter to reduce background thermal infrared loading on the detectors and optics. For the $300\textrm{ mm}$ diameter aperture $f/3$ space telescope, SPHEREx, we achieve a focus positio…
▽ More
We describe a technique for measuring focus errors in a cryogenic, wide-field, near-infrared space telescope. The measurements are made with a collimator looking through a large vacuum window, with a reflective cold filter to reduce background thermal infrared loading on the detectors and optics. For the $300\textrm{ mm}$ diameter aperture $f/3$ space telescope, SPHEREx, we achieve a focus position measurement with $\sim \! 5\textrm{ }μ\textrm{m statistical}$ and $\sim \! 15 \textrm{ }μ\textrm{m systematic}$ error.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Results and Limits of Time Division Multiplexing for the BICEP Array High Frequency Receivers
Authors:
S. Fatigoni,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
D. Beck,
J. J. Bock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. J. Cukierman,
E. V. Denison,
M. I. Dierickx,
L. Duband,
M. Eiben,
J. P. Filippini,
A. Fortes,
M. Gao,
C. Giannakopoulos,
N. Goeckner-Wald,
D. C. Goldfinger
, et al. (62 additional authors not shown)
Abstract:
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the…
▽ More
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard Multi Channel Electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates Time Division Multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and crosstalk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Future experiments like CMB-S4 plan to use TES bolometers with Time Division/SQUID-based readout for an even larger number of detectors.
△ Less
Submitted 24 October, 2023; v1 submitted 16 October, 2023;
originally announced October 2023.
-
High-sensitivity transition-edge-sensed bolometers: improved speed and characterization with AC and DC bias
Authors:
Logan Foote,
Michael D. Audley,
Charles,
Bradford,
Gert de Lange,
Pierre Echternach,
Dale J. Fixsen,
Howard Hui,
Matthew Kenyon,
Hien Nguyen,
Roger O'Brient,
Elmer H. Sharp,
Johannes G. Staguhn,
Jan van der Kuur,
Jonas Zmuidzinas
Abstract:
We report on efforts to improve the speed of low-G far-infrared transition-edged-sensed bolometers. We use a fabrication process that does not require any dry etch steps to reduce heat capacity on the suspended device and measure a reduction in the detector time constant. However, we also measure an increase in the temperature-normalized thermal conductance (G), and a corresponding increase in the…
▽ More
We report on efforts to improve the speed of low-G far-infrared transition-edged-sensed bolometers. We use a fabrication process that does not require any dry etch steps to reduce heat capacity on the suspended device and measure a reduction in the detector time constant. However, we also measure an increase in the temperature-normalized thermal conductance (G), and a corresponding increase in the noise-equivalent power (NEP). We employ a new near-IR photon-noise technique using a near-IR laser to calibrate the frequency-domain multiplexed AC system and compare the results to a well-understood DC circuit. We measure an NEP white noise level of 0.8 aW/rtHz with a 1/f knee below 0.1 Hz and a time constant of 3.2 ms.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Deformation and tearing of graphene-reinforced elastomer nanocomposites
Authors:
Mufeng Liu,
Jason H. Hui,
Ian A. Kinloch,
Robert J. Young,
Dimitrios G. Papageorgiou
Abstract:
The resistance to failure through tearing is a crucial mechanical property for the application of different elastomers. In this work, graphene nanoplatelets (GNPs) were introduced into a fluoroelastomer (FKM) matrix with the aim of improving its tear resistance. The fracture energy through tearing was evaluated using the pure shear test. It was found that the tearing energy increased linearly with…
▽ More
The resistance to failure through tearing is a crucial mechanical property for the application of different elastomers. In this work, graphene nanoplatelets (GNPs) were introduced into a fluoroelastomer (FKM) matrix with the aim of improving its tear resistance. The fracture energy through tearing was evaluated using the pure shear test. It was found that the tearing energy increased linearly with the volume fraction of the GNPs. At the maximum GNP content, the tearing resistance was 3 times higher, suggesting efficient toughening from the GNPs. Theoretical analysis of the micromechanics was conducted by considering debonding and pull-out of the nanoplatelets as possible toughening mechanisms. It was determined quantitatively that the main toughening mechanism was debonding of the interface rather than pull-out. The formation of cavities at flake ends during the deformation, as confirmed by scanning electron microscopy, was found to contribute to the remarkably high interfacial debonding energy (~1 kJ/m2).
△ Less
Submitted 23 April, 2021;
originally announced April 2021.
-
Receiver development for BICEP Array, a next-generation CMB polarimeter at the South Pole
Authors:
L. Moncelsi,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
J. J. Bock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. Cukierman,
E. V. Denison,
M. Dierickx,
L. Duband,
M. Eiben,
S. Fatigoni,
J. P. Filippini,
N. Goeckner-Wald,
D. C. Goldfinger,
J. Grayson,
P. Grimes,
G. Hall
, et al. (50 additional authors not shown)
Abstract:
A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date…
▽ More
A detection of curl-type ($B$-mode) polarization of the primary CMB would be direct evidence for the inflationary paradigm of the origin of the Universe. The BICEP/Keck Array (BK) program targets the degree angular scales, where the power from primordial $B$-mode polarization is expected to peak, with ever-increasing sensitivity and has published the most stringent constraints on inflation to date. BICEP Array (BA) is the Stage-3 instrument of the BK program and will comprise four BICEP3-class receivers observing at 30/40, 95, 150 and 220/270 GHz with a combined 32,000+ detectors; such wide frequency coverage is necessary for control of the Galactic foregrounds, which also produce degree-scale $B$-mode signal. The 30/40 GHz receiver is designed to constrain the synchrotron foreground and has begun observing at the South Pole in early 2020. By the end of a 3-year observing campaign, the full BICEP Array instrument is projected to reach $σ_r$ between 0.002 and 0.004, depending on foreground complexity and degree of removal of $B$-modes due to gravitational lensing (delensing). This paper presents an overview of the design, measured on-sky performance and calibration of the first BA receiver. We also give a preview of the added complexity in the time-domain multiplexed readout of the 7,776-detector 150 GHz receiver.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Adaptive optical focusing through perturbed scattering media with dynamic mutation algorithm
Authors:
Huanhao Li,
Chi Man Woo,
Tianting Zhong,
Zhipeng Yu,
Yunqi Luo,
Yuan** Zheng,
Xin Yang,
Hui Hui,
Puxiang Lai
Abstract:
Optical focusing through/inside scattering media, like multimode fiber and biological tissues, has significant impact in biomedicine yet considered challenging due to strong scattering nature of light. Previously, promising progress has been made, benefiting from the iterative optical wavefront sha**, with which deep-tissue high-resolution optical focusing becomes possible. Most of iterative alg…
▽ More
Optical focusing through/inside scattering media, like multimode fiber and biological tissues, has significant impact in biomedicine yet considered challenging due to strong scattering nature of light. Previously, promising progress has been made, benefiting from the iterative optical wavefront sha**, with which deep-tissue high-resolution optical focusing becomes possible. Most of iterative algorithms can overcome noise perturbations but fail to effectively adapt beyond the noise, e.g. sudden strong perturbations. Re-optimizations are usually needed for significant decorrelated medium since these algorithms heavily rely on the optimization in the previous iterations. Such ineffectiveness is probably due to the absence of a metric that can gauge the deviation of the instant wavefront from the optimum compensation based on the concurrently measured optical focusing. In this study, a square rule of binary-amplitude modulation, directly relating the measured focusing performance with the error in the optimized wavefront, is theoretically proved and experimentally validated. With this simple rule, it is feasible to quantify how many pixels on the spatial light modulator incorrectly modulate the wavefront for the instant status of the medium or the whole system. As an example of application, we propose a novel algorithm, dynamic mutation algorithm, with high adaptability against perturbations by probing how far the optimization has gone toward the theoretically optimum. The diminished focus of scattered light can be effectively recovered when perturbations to the medium cause significant drop of the focusing performance, which no existing algorithms can achieve due to their inherent strong dependence on previous optimizations. With further improvement, this study may boost or inspire many applications, like high-resolution imaging and stimulation, in instable scattering environments.
△ Less
Submitted 17 October, 2020;
originally announced October 2020.
-
Characterizing the Sensitivity of 40 GHz TES Bolometers for BICEP Array
Authors:
C. Zhang,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
J. J. Bock,
H. Boenish,
E. Bullock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. Cukierman,
M. Dierickx,
L. Duband,
S. Fatigoni,
J. P. Filippini,
G. Hall,
M. Halpern,
S. Harrison,
S. Henderson,
S. R. Hildebrandt
, et al. (44 additional authors not shown)
Abstract:
The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of grav…
▽ More
The BICEP/Keck (BK) experiment aims to detect the imprint of primordial gravitational waves in the Cosmic Microwave Background polarization, which would be direct evidence of the inflation theory. While the tensor-to-scalar ratio has been constrained to be r_0.05 < 0.06 at 95% c.l., further improvements on this upper limit are hindered by polarized Galactic foreground emissions and removal of gravitational lensing polarization. The 30/40 GHz receiver of the BICEP Array (BA) will deploy at the end of 2019 and will constrain the synchrotron foreground with unprecedented accuracy within the BK sky patch. We will show the design of the 30/40 GHz detectors and test results summarizing its performance. The low optical and atmospheric loading at these frequencies requires our TES detectors to have low saturation power in order to be photon-noise dominated. To realize the low thermal conductivity required from a 250 mK base temperature, we developed new bolometer leg designs. We will present the relevant measured detector parameters: G, Tc, Rn, Psat , and spectral bands, and noise spectra. We achieved a per bolometer NEP including all noise components of 2.07E-17 W/sqrt(Hz), including an anticipated photon noise level 1.54E-17 W/sqrt(Hz).
△ Less
Submitted 12 February, 2020;
originally announced February 2020.
-
Status Update on the ISAC Control System
Authors:
R. Keitel,
D. Bishop,
D. Dale,
H. Hui,
S. Kadantsev,
M. Leross,
R. Nussbaumer,
J. Richards,
E. Tikhomolov,
G. Waters
Abstract:
Implementation and commissioning of the EPICS based control system for the ISAC radioactive beam facility was completed. The target ion source, mass separator, and low-energy beam-lines started beam production for experiments. In parallel, controls for the accelerator system, a radio-frequency quadrupole followed by a drift-tube linac, and several high-energy beam-lines were implemented and comm…
▽ More
Implementation and commissioning of the EPICS based control system for the ISAC radioactive beam facility was completed. The target ion source, mass separator, and low-energy beam-lines started beam production for experiments. In parallel, controls for the accelerator system, a radio-frequency quadrupole followed by a drift-tube linac, and several high-energy beam-lines were implemented and commissioned. The number of controlled devices more than doubled since the last report. An overview of relational database usage, software engineering and quality control methods used will be given.
△ Less
Submitted 9 November, 2001;
originally announced November 2001.
-
Laser Stabilization Controls for the ISAC Beam Polarizer
Authors:
R. Nussbaumer,
D. Dale,
H. Hui,
J. Richards,
P. Levy
Abstract:
The ISAC polarized beam facility uses a Ti:Sapphire laser for producing spin-polarized beams of short-lived radioactive isotopes, initially 7Li. The laser power and spectral content must be tightly controlled and monitored. The control system to accomplish this task uses techniques that combine operator interface, data reduction, and closed loop automation. The laser stabilization application us…
▽ More
The ISAC polarized beam facility uses a Ti:Sapphire laser for producing spin-polarized beams of short-lived radioactive isotopes, initially 7Li. The laser power and spectral content must be tightly controlled and monitored. The control system to accomplish this task uses techniques that combine operator interface, data reduction, and closed loop automation. The laser stabilization application uses input data acquired from a spectrum analyzer, in the form of a waveform array repetitively acquired from a GPIB-interfaced oscilloscope. A Labview based operator interface allows the selection of features from within the waveform, which are then used as the basis for closed loop control, in concert with the existing EPICS control system software and related hardware. Part of the challenge stems from using input data which are subject to human interpretation and require distillation into a hard numeric format suitable for use in a control system.
△ Less
Submitted 9 November, 2001;
originally announced November 2001.