Showing 1–50 of 360 results for author: Huang, Z

The differences in the origination and properties of the near-Earth solar wind between solar cycles 23 and 24

Authors: Xinzheng Shi, Hui Fu, Zhenghua Huang, Limei Yan, Chi Ma, Chenxi Huangfu, Hongqiang Song, Lidong Xia

Abstract: The dependence of the sources and properties of the near-Earth solar wind on solar cycle activity is an important issue in solar and space physics. We use the improved two-step map** procedure that takes into account the initial acceleration processes to trace the near-Earth solar winds back to their source regions from 1999 to 2020, covering solar cycles (SCs) 23 and 24. Then the solar wind is… ▽ More The dependence of the sources and properties of the near-Earth solar wind on solar cycle activity is an important issue in solar and space physics. We use the improved two-step map** procedure that takes into account the initial acceleration processes to trace the near-Earth solar winds back to their source regions from 1999 to 2020, covering solar cycles (SCs) 23 and 24. Then the solar wind is categorized into coronal hole (CH), active region (AR), and quiet Sun (QS) solar wind based on the source region types. We find that the proportions of CH and AR (QS) wind during SC 23 are higher (lower) than those during SC 24. During solar maximum and declining phases, the magnetic field strength, speed, helium abundance (AHe), and charge states of all three types of solar wind during SC 23 are generally higher than those during SC 24. During solar minimum, these parameters of solar wind are generally lower during SC 23 than those during SC 24. There is a significant decrease in the charge states of all three types of solar wind during the solar minimum of SC 23. The present statistical results demonstrate that the sources and properties of the solar wind are both influenced by solar cycle amplitude. The temperatures of AR, QS, and CH regions exhibit significant difference at low altitudes, whereas they are almost uniform at high altitudes. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Comments: 21 pages, 11 figures

Fast 3D 31P B1+ map** with a weighted stack of spiral trajectory at 7 Tesla

Authors: Mark Widmaier, Antonia Kaiser, Salome Baup, Daniel Wenz, Katarzyna Pierzchala, Ying Xiao, Zhiwei Huang, Yun Jiang, Li**g Xin

Abstract: Purpose: Phosphorus Magnetic Resonance Spectroscopy (31P MRS) enables non-invasive assessment of energy metabolism, yet its application is hindered by sensitivity limitations. To overcome this, often high magnetic fields are used, leading to challenges such as spatial B_1^+ inhomogeneity and therefore the need for accurate flip angle determination in accelerated acquisitions with short repetition… ▽ More Purpose: Phosphorus Magnetic Resonance Spectroscopy (31P MRS) enables non-invasive assessment of energy metabolism, yet its application is hindered by sensitivity limitations. To overcome this, often high magnetic fields are used, leading to challenges such as spatial B_1^+ inhomogeneity and therefore the need for accurate flip angle determination in accelerated acquisitions with short repetition times (T_R). In response to these challenges, we propose a novel short T_R and look-up table-based Double-Angle Method for fast 3D 31P B_1^+ map** (fDAM). Methods: Our method incorporates 3D weighted stack of spiral gradient echo acquisitions and a frequency-selective pulse to enable efficient B_1^+ map** based on the phosphocreatine signal at 7T. Protocols were optimised using simulations and validated through phantom experiments. The method was validated in phantom experiments and skeletal muscle applications using a birdcage 1H/31P volume coil. Results: The results of fDAM were compared to the classical DAM (cDAM). A good correlation (r=0.94) was obtained between the two B_1^+ maps. A 3D 31P B_1^+ map** in the human calf muscle was achieved in about 10 min using a birdcage volume coil, with a 20% extended coverage relative to that of the cDAM (24 min). fDAM also enabled the first full brain coverage 31P 3D B_1^+ map** in approx. 10 min using a 1 Tx/ 32 Rx coil. Conclusion: fDAM is an efficient method for 31P 3D B_1^+ map**, showing promise for future applications in rapid 31P MRSI. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Search for fractionally charged particles with CUORE

Authors: CUORE Collaboration, D. Q. Adams, C. Alduino, K. Alfonso, F. T. Avignone III, O. Azzolini, G. Bari, F. Bellini, G. Benato, M. Beretta, M. Biassoni, A. Branca, C. Brofferio, C. Bucci, J. Camilleri, A. Caminata, A. Campani, J. Cao, S. Capelli, C. Capelli, L. Cappelli, L. Cardani, P. Carniti, N. Casali, E. Celi , et al. (95 additional authors not shown)

Abstract: The Cryogenic Underground Observatory for Rare Events (CUORE) is a detector array comprised by 988 5$\;$cm$\times$5$\;$cm$\times$5$\;$cm TeO$_2$ crystals held below 20 mK, primarily searching for neutrinoless double-beta decay in $^{130}$Te. Unprecedented in size amongst cryogenic calorimetric experiments, CUORE provides a promising setting for the study of exotic through-going particles. Using th… ▽ More The Cryogenic Underground Observatory for Rare Events (CUORE) is a detector array comprised by 988 5$\;$cm$\times$5$\;$cm$\times$5$\;$cm TeO$_2$ crystals held below 20 mK, primarily searching for neutrinoless double-beta decay in $^{130}$Te. Unprecedented in size amongst cryogenic calorimetric experiments, CUORE provides a promising setting for the study of exotic through-going particles. Using the first tonne-year of CUORE's exposure, we perform a search for hypothesized fractionally charged particles (FCPs), which are well-motivated by various Standard Model extensions and would have suppressed interactions with matter. No excess of FCP candidate tracks is observed over background, setting leading limits on the underground FCP flux with charges between $e/24-e/5$ at 90\% confidence level. Using the low background environment and segmented geometry of CUORE, we establish the sensitivity of tonne-scale sub-Kelvin detectors to diverse signatures of new physics. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures

Retiming dynamics of harmonically modelocked laser solitons in a self-driven optomechanical lattice

Authors: Xiaocong Wang, Benhai Wang, Wenbin He, Xintong Zhang, Qi Huang, Zhiyuan Huang, Xin Jiang, Philip St. J. Russell, Meng Pang

Abstract: Harmonic mode-locking, realized actively or passively, is an effective technique for increasing the repetition rate of lasers, with important applications in optical sampling, laser micro-machining and frequency metrology. It is critically important to understand how a harmonically mode-locked pulse train responds to external perturbations and noise, so as to make sure that it is stable and resist… ▽ More Harmonic mode-locking, realized actively or passively, is an effective technique for increasing the repetition rate of lasers, with important applications in optical sampling, laser micro-machining and frequency metrology. It is critically important to understand how a harmonically mode-locked pulse train responds to external perturbations and noise, so as to make sure that it is stable and resistant to noise. Here, in a series of carefully designed experiments, we elucidate the retiming dynamics of laser pulses generated in a soliton fiber laser harmonically mode-locked at ~2 GHz to the acoustic resonance in a photonic crystal fiber (PCF) core. We characterize the self-driven optomechanical lattice along the PCF using a homodyne set-up, and reveal that each soliton undergoes damped oscillatory retiming within its trap** potential after an abrupt perturbation. In addition we show, through statistical analysis of the intra-cavity pulse spacing, how the trap** potentials are effective for suppressing timing jitter. The experimental results are well described using a dynamic model including dissipation, which provides valuable insight into the stability and noise performance of optomechanically mode-locked laser systems, and may also be useful for studying complex inter-soliton interactions. △ Less

Submitted 14 June, 2024; originally announced June 2024.

Hybrid terahertz emitter for pulse sha** and chirality control

Authors: Weipeng Wu, Wilder Acuna, Zhixiang Huang, Xi Wang, Lars Gundlach, Matthew F. Doty, Joshua M. O. Zide, M. Benjamin Jungfleisch

Abstract: Terahertz (THz) radiation, spanning from 0.3 to 3x10^12 Hz, fills the crucial gap between the microwave and infrared spectral range. THz technology has found applications in various fields, from imaging and sensing to telecommunication and biosensing. However, the full potential of these applications is often hindered by the need for precise control and manipulation of the frequency and polarizati… ▽ More Terahertz (THz) radiation, spanning from 0.3 to 3x10^12 Hz, fills the crucial gap between the microwave and infrared spectral range. THz technology has found applications in various fields, from imaging and sensing to telecommunication and biosensing. However, the full potential of these applications is often hindered by the need for precise control and manipulation of the frequency and polarization state, which typically requires external THz modulators. Here, we demonstrate a hybrid THz source that overcomes this limitation. Our device consists of two THz emitters integrated into one single device, enabling pulse sha** and chirality control of the emitted radiation without additional external components. The two sources are a spintronic emitter and a semiconductor photoconductive antenna (PCA). Using a combination of dual-wavelength excitation, allowing for control of the relative time delay between the two laser excitation pulses, and tuning external parameters for each emitter (i.e., biasing voltage for the PCA and magnetic field for the spintronic THz emitter) enables precise control of the mixing of the two signals and results in frequency, polarization, and chirality control of the overall THz radiation. This on-chip hybrid emitter provides an essential platform for engineered THz radiation with wide-ranging potential applications. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Data-driven background model for the CUORE experiment

Authors: CUORE Collaboration, D. Q. Adams, C. Alduino, K. Alfonso, F. T. Avignone III, O. Azzolini, G. Bari, F. Bellini, G. Benato, M. Beretta, M. Biassoni, A. Branca, C. Brofferio, C. Bucci, J. Camilleri, A. Caminata, A. Campani, J. Cao, S. Capelli, C. Capelli, L. Cappelli, L. Cardani, P. Carniti, N. Casali, E. Celi , et al. (93 additional authors not shown)

Abstract: We present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth explo… ▽ More We present the model we developed to reconstruct the CUORE radioactive background based on the analysis of an experimental exposure of 1038.4 kg yr. The data reconstruction relies on a simultaneous Bayesian fit applied to energy spectra over a broad energy range. The high granularity of the CUORE detector, together with the large exposure and extended stable operations, allow for an in-depth exploration of both spatial and time dependence of backgrounds. We achieve high sensitivity to both bulk and surface activities of the materials of the setup, detecting levels as low as 10 nBq kg$^{-1}$ and 0.1 nBq cm$^{-2}$, respectively. We compare the contamination levels we extract from the background model with prior radio-assay data, which informs future background risk mitigation strategies. The results of this background model play a crucial role in constructing the background budget for the CUPID experiment as it will exploit the same CUORE infrastructure. △ Less

Submitted 28 May, 2024; originally announced May 2024.

3-Minute Oscillations in the Upper Corona: Evidence from Parker Solar Probe

Authors: Zesen Huang, Marco Velli, Chen Shi, Yingjie Zhu, B. D. G. Chandran, Victor Réville, Trevor Bowen, Nikos Sioulas, Marc Pulupa, Jia Huang, Sheng Huang

Abstract: Recent observations of Parker Solar Probe (PSP) from around the Alfvén surface have shown that the trace magnetic power spectrum density (PSD) is often characterized by a shallow-inertial double power law, where in the low frequency energy injection range, the power spectrum is shallow (flatter than $1/f$), and in the inertial range the spectrum is steep, with a scaling index of [1.5, 1.67]. Conse… ▽ More Recent observations of Parker Solar Probe (PSP) from around the Alfvén surface have shown that the trace magnetic power spectrum density (PSD) is often characterized by a shallow-inertial double power law, where in the low frequency energy injection range, the power spectrum is shallow (flatter than $1/f$), and in the inertial range the spectrum is steep, with a scaling index of [1.5, 1.67]. Consequently, close to the sun, the majority of the fluctuation energy concentrates in a small frequency range around the low frequency power spectral break. In this work, we conduct a systematic survey of PSP observations for the first 17 encounters to statistically study the energy behaviors of the magnetic fluctuations. Our results show that the center frequency of fluctuation energy systematically drifts to around 3-minute for the most pristine solar wind (smallest solar wind advection time). Moreover, the center frequency rapidly drifts to lower frequency as solar wind advection time increases, as expected for active turbulence. The concentration of fluctuation energy around 3-minutes suggests that Alfvénic fluctuations in solar wind might mostly be coming from resonant p-mode oscillations in the photosphere, though other potential sources are discussed. △ Less

Submitted 24 May, 2024; originally announced May 2024.

Silicon Photonics Foundry Fabricated, Slow-Light Enhanced, Low Power Thermal Phase Shifter

Authors: Alexander Chen, Meng Zhang, Daniel Crowley, Nicholas Gangi, Amir Begović, Zhaoran Rena Huang

Abstract: In this research, we developed a low-power silicon photonics foundry-fabricated slow-light thermal phase shifter (SLTPS) where the slow-light (SL) effect is achieved using an integrated Bragg grating (BG) waveguide. Heating the grating induces a red shift in the transmission spectrum, leading to an increased group index $n_g$ during operation, which facilitates a further reduction in the voltage n… ▽ More In this research, we developed a low-power silicon photonics foundry-fabricated slow-light thermal phase shifter (SLTPS) where the slow-light (SL) effect is achieved using an integrated Bragg grating (BG) waveguide. Heating the grating induces a red shift in the transmission spectrum, leading to an increased group index $n_g$ during operation, which facilitates a further reduction in the voltage needed for a $π$ phase shift, i.e. $V_π$. Additionally, we investigated a compact Mach-Zehnder Interferometer (MZI) that incorporates the SLTPS in both arms with a phase shifter length of 50 $μ$m. A detailed theoretical analysis was conducted to address the non-idealities of the SL-MZI due to uneven optical power splitting and unbalanced loss in the two MZI arms. The $V_π$ and power consumption for a $π$ phase shift $(P_π)$ of the SL-MZI were quantified for operation in the slow light regime, demonstrating a $V_π$ of 1.1 V and a $P_π$ of 3.63 mW at an operational wavelength near the photonic band edge. The figure of merit (FOM) $P_π \times τ$ is commonly used to assess the performance of thermal optical switches. The SL-MZI in this work has achieved a low $P_π \times τ$ of 5.1 mW $μ$s. Insertion loss of the SL-MZI ranges from 1.3 dB to 4.4 dB depending on the operation wavelength, indicating a trade-off with the $V_π$ reduction. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Comments: 14 pages, 9 figures, 1 table

Effects of skull properties on transcranial focused ultrasound transmission

Authors: Han Li, Isla Barnard, Tyler Halliwell, Xinyu Zhang, Andreas Melzer, Zhihong Huang

Abstract: Transcranial focused ultrasound can deliver energy to the brain in a minimally invasive manner for a variety of clinical applications. However, acoustic inhomogeneities within the skull cause significant wave interactions, leading to difficulties in predicting the energy delivered to the target. We present a comprehensive examination of intracranial acoustic fields generated by focused ultrasound… ▽ More Transcranial focused ultrasound can deliver energy to the brain in a minimally invasive manner for a variety of clinical applications. However, acoustic inhomogeneities within the skull cause significant wave interactions, leading to difficulties in predicting the energy delivered to the target. We present a comprehensive examination of intracranial acoustic fields generated by focused ultrasound transducers and assess the characteristics of cranial bone that affect acoustic transmission. Acoustic field maps were generated at 88 regions of interest across 10 historical and 2 Thiel-embalmed human skull specimens with sonication at frequencies of 220 kHz, 650 kHz, and 1000 kHz. The average peak pressure attenuation was $3.1 \pm 1.4$ dB, $9.0 \pm 1.7$ dB, and $14.6 \pm 4.1$ dB, respectively. The average power attenuation was $5.0 \pm 2.4$ dB, $14.9 \pm 3.2$ dB, and $24.1 \pm 6.3$ dB, respectively. The effect of skull thickness, skull density ratio, and skull curvature on intracranial peak pressure and power was investigated and linear fits produced. Our results demonstrate that Thiel-embalmed samples fall within the confidence intervals of fits for historical samples. The effects of angulation and spacing between the transducer and the skull were also investigated. Results indicate that wave superposition resulting from skull and transducer spacing could lead to a 30-40% uncertainty in peak recorded intracranial pressure. △ Less

Submitted 18 May, 2024; v1 submitted 14 May, 2024; originally announced May 2024.

Comments: 31 pages, 8 figures

Nonreciprocal interactions in crowd dynamics: investigating the impact of moving threats on pedestrian speed preferences

Authors: Shaocong Xie, Rui Ye, Xiaolian Li, Zhongyi Huang, Shuchao Cao, Wei Lv, Hong He, ** Zhang, Zhiming Fang, Jun Zhang, Weiguo Song

Abstract: Nonreciprocal interaction crowd systems, such as human-human, human-vehicle, and human-robot systems, often have serious impacts on pedestrian safety and social order. A more comprehensive understanding of these systems is needed to optimize system stability and efficiency. Despite the importance of these interactions, empirical research in this area remains limited. Thus, in our study we explore… ▽ More Nonreciprocal interaction crowd systems, such as human-human, human-vehicle, and human-robot systems, often have serious impacts on pedestrian safety and social order. A more comprehensive understanding of these systems is needed to optimize system stability and efficiency. Despite the importance of these interactions, empirical research in this area remains limited. Thus, in our study we explore this underresearched area, focusing on scenarios where nonreciprocity plays a critical role, such as mass stabbings, which pose a substantial risk to public safety. We conducted the first experiments on this system and analysed high-accuracy data obtained from these experiments. The extent of the direct threat zone is determined by the speed of the moving threat and the radius of danger occurrence. We further categorize potential threats into direct, adjacent, and rear-view zones, quantifying the level of threat for pedestrians. Our study revealed that a pedestrian's desired velocity correlated positively with potential threat intensity, increasing until near the direct threat zone. An emerging steady state is observed when escape routes are blocked by moving threats. This deviation affects the density-velocity relationship, making it distinct from the general relationship. This deviation signifies unique pedestrian behaviour in the presence of moving threats. Additionally, the rate of change in the angle for pedestrian motion in various desired directions is synchronized. This indicates the emergence of collective intelligence in nonreciprocal interaction crowd systems. As a result, our study may constitute a pioneering step towards understanding nonreciprocal interactions in crowd systems through laboratory experiments. These findings may enhance pedestrian safety and inform not only government crowd management strategies but also individual self-protection measures. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Dynamic motion trajectory control with nanoradian accuracy for multi-element X-ray optical systems via laser interferometry

Authors: Sina M Koehlenbeck, Lance Lee, Mario D Balcazar, Ying Chen, Vincent Esposito, Jerry Hastings, Matthias C Hoffmann, Zhirong Huang, May-Ling Ng, Saxon Price, Takahiro Sato, Matthew Seaberg, Yanwen Sun, Adam White, Lin Zhang, Brian Lantz, Diling Zhu

Abstract: The past decades have witnessed the development of new X-ray beam sources with brightness growing at a rate surpassing Moore's law. Current and upcoming diffraction limited and fully coherent X-ray beam sources, including multi-bend achromat based synchrotron sources and high repetition rate X-ray free electron lasers, puts increasingly stringent requirements on stability and accuracy of X-ray opt… ▽ More The past decades have witnessed the development of new X-ray beam sources with brightness growing at a rate surpassing Moore's law. Current and upcoming diffraction limited and fully coherent X-ray beam sources, including multi-bend achromat based synchrotron sources and high repetition rate X-ray free electron lasers, puts increasingly stringent requirements on stability and accuracy of X-ray optics systems. Parasitic motion errors at sub-micro radian scale in beam transport and beam conditioning optics can lead to significant loss of coherence and brightness delivered from source to experiment. To address this challenge, we incorporated optical metrology based on interferometry and differential wavefront sensing as part of the X-ray optics motion control system. A prototype X-ray optics system was constructed following the optical layout of a tunable X-ray cavity. On-line interferometric metrology enabled dynamical feedback to a motion control system to track and compensate for motion errors. The system achieved sub-microradian scale performance, as multiple optical elements are synchronously and continuously adjusted. This first proof of principle measurement demonstrated both the potential and necessity of incorporating optical metrology as part of the motion control architecture for large scale X-ray optical systems such as monochromators, delay lines, and in particular, X-ray cavity systems to enable the next generation cavity-based X-ray free electron lasers. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Octave-wide broadening of ultraviolet dispersive wave driven by soliton-splitting dynamics

Authors: Tiandao Chen, **yu Pan, Zhiyuan Huang, Yue Yu, Donghan Liu, Xinshuo Chang, Zhengzheng Liu, Wenbin He, Xin Jiang, Meng Pang, Yuxin Leng, Ruxin Li

Abstract: Coherent dispersive wave emission, as an important phenomenon of soliton dynamics, manifests itself in multiple platforms of nonlinear optics from fibre waveguides to integrated photonics. Limited by its resonance nature, efficient generation of coherent dispersive wave with ultra-broad bandwidth has, however, proved difficult to realize. Here, we unveil a new regime of soliton dynamics in which t… ▽ More Coherent dispersive wave emission, as an important phenomenon of soliton dynamics, manifests itself in multiple platforms of nonlinear optics from fibre waveguides to integrated photonics. Limited by its resonance nature, efficient generation of coherent dispersive wave with ultra-broad bandwidth has, however, proved difficult to realize. Here, we unveil a new regime of soliton dynamics in which the dispersive wave emission process strongly couples with the splitting dynamics of the driving pulse. High-order dispersion and self-steepening effects, accumulated over soliton self-compression, break the system symmetry, giving rise to high-efficiency generation of coherent dispersive wave in the ultraviolet region. Simultaneously, asymmetric soliton splitting results in the appearance of a temporally-delayed ultrashort pulse with high intensity, overlap** and copropagating with the dispersive wave pulse. Intense cross-phase modulations lead to octave-wide broadening of the dispersive wave spectrum, covering 200 to 400 nm wavelengths. The highly-coherent, octave-wide ultraviolet spectrum, generated from the simple capillary fibre set-up, is in great demand for time-resolved spectroscopy, ultrafast electron microscopy and frequency metrology applications, and the critical role of the secondary pulse in this process reveals some new opportunities for all-optical control of versatile soliton dynamics. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Generating Synthetic Computed Tomography for Radiotherapy: SynthRAD2023 Challenge Report

Authors: Evi M. C. Huijben, Maarten L. Terpstra, Arthur Jr. Galapon, Suraj Pai, Adrian Thummerer, Peter Koopmans, Manya Afonso, Maureen van Eijnatten, Oliver Gurney-Champion, Zeli Chen, Yiwen Zhang, Kaiyi Zheng, Chuanpu Li, Haowen Pang, Chuyang Ye, Runqi Wang, Tao Song, Fuxin Fan, **gna Qiu, Yixing Huang, Juhyung Ha, Jong Sung Park, Alexandra Alain-Beaudoin, Silvain Bériault, Pengxin Yu , et al. (34 additional authors not shown)

Abstract: Radiation therapy plays a crucial role in cancer treatment, necessitating precise delivery of radiation to tumors while sparing healthy tissues over multiple days. Computed tomography (CT) is integral for treatment planning, offering electron density data crucial for accurate dose calculations. However, accurately representing patient anatomy is challenging, especially in adaptive radiotherapy, wh… ▽ More Radiation therapy plays a crucial role in cancer treatment, necessitating precise delivery of radiation to tumors while sparing healthy tissues over multiple days. Computed tomography (CT) is integral for treatment planning, offering electron density data crucial for accurate dose calculations. However, accurately representing patient anatomy is challenging, especially in adaptive radiotherapy, where CT is not acquired daily. Magnetic resonance imaging (MRI) provides superior soft-tissue contrast. Still, it lacks electron density information while cone beam CT (CBCT) lacks direct electron density calibration and is mainly used for patient positioning. Adopting MRI-only or CBCT-based adaptive radiotherapy eliminates the need for CT planning but presents challenges. Synthetic CT (sCT) generation techniques aim to address these challenges by using image synthesis to bridge the gap between MRI, CBCT, and CT. The SynthRAD2023 challenge was organized to compare synthetic CT generation methods using multi-center ground truth data from 1080 patients, divided into two tasks: 1) MRI-to-CT and 2) CBCT-to-CT. The evaluation included image similarity and dose-based metrics from proton and photon plans. The challenge attracted significant participation, with 617 registrations and 22/17 valid submissions for tasks 1/2. Top-performing teams achieved high structural similarity indices (>0.87/0.90) and gamma pass rates for photon (>98.1%/99.0%) and proton (>97.3%/97.0%) plans. However, no significant correlation was found between image similarity metrics and dose accuracy, emphasizing the need for dose evaluation when assessing the clinical applicability of sCT. SynthRAD2023 facilitated the investigation and benchmarking of sCT generation techniques, providing insights for develo** MRI-only and CBCT-based adaptive radiotherapy. △ Less

Submitted 11 June, 2024; v1 submitted 13 March, 2024; originally announced March 2024.

Comments: Preprint submitted to Medical Image Analysis

Detecting Neutrinos from Supernova Bursts in PandaX-4T

Authors: Binyu Pang, Abdusalam Abdukerim, Zihao Bo, Wei Chen, Xun Chen, Chen Cheng, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Changbo Fu, Mengting Fu, Lisheng Geng, Karl Giboni, Linhui Gu, Xuyuan Guo, Chencheng Han, Ke Han, Changda He, **rong He, Di Huang, Yanlin Huang, Junting Huang, Zhou Huang, Ruquan Hou , et al. (71 additional authors not shown)

Abstract: Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict… ▽ More Neutrinos from core-collapse supernovae are essential for the understanding of neutrino physics and stellar evolution. The dual-phase xenon dark matter detectors can provide a way to track explosions of galactic supernovae by detecting neutrinos through coherent elastic neutrino-nucleus scatterings. In this study, a variation of progenitor masses as well as explosion models are assumed to predict the neutrino fluxes and spectra, which result in the number of expected neutrino events ranging from 6.6 to 13.7 at a distance of 10 kpc over a 10-second duration with negligible backgrounds at PandaX-4T. Two specialized triggering alarms for monitoring supernova burst neutrinos are built. The efficiency of detecting supernova explosions at various distances in the Milky Way is estimated. These alarms will be implemented in the real-time supernova monitoring system at PandaX-4T in the near future, providing the astronomical communities with supernova early warnings. △ Less

Submitted 10 March, 2024; originally announced March 2024.

Comments: 9 pages,6 figures

Interaction between a Coronal Mass Ejection and Comet 67P/Churyumov-Gerasimenko

Authors: Zhenguang Huang, Gabor Toth, Tamas I. Gombosi, Michael R. Combi, Xianzhe Jia, Yinsi Shou, Valeriy Tenishev, Kathrin Altwegg, Martin Rubin

Abstract: The interaction between a Coronal Mass Ejection (CME) and a comet has been observed several times by in-situ observations from the Rosetta Plasma Consortium (RPC), which is designed to investigate the cometary magnetosphere of comet 67P/Churyumov-Gerasimenko (CG). Goetz et al. (2019) reported a magnetic field of up to 300 nT measured in the inner coma, which is among the largest interplanetary mag… ▽ More The interaction between a Coronal Mass Ejection (CME) and a comet has been observed several times by in-situ observations from the Rosetta Plasma Consortium (RPC), which is designed to investigate the cometary magnetosphere of comet 67P/Churyumov-Gerasimenko (CG). Goetz et al. (2019) reported a magnetic field of up to 300 nT measured in the inner coma, which is among the largest interplanetary magnetic fields observed in the solar system. They suggested the large magnetic field observations in the inner coma come from magnetic field pile-up regions, which are generated by the interaction between a CME and/or corotating interaction region and the cometary magnetosphere. However, the detailed interaction between a CME and the cometary magnetosphere of comet CG in the inner coma has not been investigated by numerical simulations yet. In this manuscript, we will use a numerical model to simulate the interaction between comet CG and a Halloween class CME and investigate its magnetospheric response to the CME. We find that the plasma structures change significantly during the CME event, and the maximum value of the magnetic field strength is more than 500nT close to the nucleus. Virtual satellites at similar distances as Rosetta show that the magnetic field strength can be as large as 250nT, which is slightly less than what Goetz et al. (2019) reported. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: 19 pages, 5 figures, submitted to ApJ

GenML: A Python Library to Generate the Mittag-Leffler Correlated Noise

Authors: Xiang Qu, Hui Zhao, Wenjie Cai, Gongyi Wang, Zihan Huang

Abstract: Mittag-Leffler correlated noise (M-L noise) plays a crucial role in the dynamics of complex systems, yet the scientific community has lacked tools for its direct generation. Addressing this gap, our work introduces GenML, a Python library specifically designed for generating M-L noise. We detail the architecture and functionalities of GenML and its underlying algorithmic approach, which enables th… ▽ More Mittag-Leffler correlated noise (M-L noise) plays a crucial role in the dynamics of complex systems, yet the scientific community has lacked tools for its direct generation. Addressing this gap, our work introduces GenML, a Python library specifically designed for generating M-L noise. We detail the architecture and functionalities of GenML and its underlying algorithmic approach, which enables the precise simulation of M-L noise. The effectiveness of GenML is validated through quantitative analyses of autocorrelation functions and diffusion behaviors, showcasing its capability to accurately replicate theoretical noise properties. Our contribution with GenML enables the effective application of M-L noise data in numerical simulation and data-driven methods for describing complex systems, moving beyond mere theoretical modeling. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: 6 pages, 4 figures

Signal Response Model in PandaX-4T

Authors: Yunyang Luo, Zihao Bo, Shibo Zhang, Abdusalam Abdukerim, Chen Cheng, Wei Chen, Xun Chen, Yunhua Chen, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Changbo Fu, Mengting Fu, Lisheng Geng, Karl Giboni, Linhui Gu, Xuyuan Guo, Chencheng Han, Ke Han, Changda He, **rong He, Di Huang, Yanlin Huang, Zhou Huang , et al. (66 additional authors not shown)

Abstract: PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as ga… ▽ More PandaX-4T experiment is a deep-underground dark matter direct search experiment that employs a dual-phase time projection chamber with a sensitive volume containing 3.7 tonne of liquid xenon. The detector of PandaX-4T is capable of simultaneously collecting the primary scintillation and ionization signals, utilizing their ratio to discriminate dark matter signals from background sources such as gamma rays and beta particles. The signal response model plays a crucial role in interpreting the data obtained by PandaX-4T. It describes the conversion from the deposited energy by dark matter interactions to the detectable signals within the detector. The signal response model is utilized in various PandaX-4T results. This work provides a comprehensive description of the procedures involved in constructing and parameter-fitting the signal response model for the energy range of approximately 1 keV to 25 keV for electronic recoils and 6 keV to 90 keV for nuclear recoils. It also covers the signal reconstruction, selection, and correction methods, which are crucial components integrated into the signal response model. △ Less

Submitted 14 June, 2024; v1 submitted 7 March, 2024; originally announced March 2024.

Solar Wind Driven from GONG Magnetograms in the Last Solar Cycle

Authors: Zhenguang Huang, Gabor Toth, Nishtha Sachdeva, Bart van der Holst

Abstract: In a previous study, Huang et al. (2023) used the Alfven Wave Solar atmosphere Model (AWSoM), one of the widely used solar wind models in the community, driven by ADAPT-GONG magnetograms to simulate the solar wind in the last solar cycle and found that the optimal Poynting flux parameter can be estimated from either the open field area or the average unsigned radial component of the magnetic field… ▽ More In a previous study, Huang et al. (2023) used the Alfven Wave Solar atmosphere Model (AWSoM), one of the widely used solar wind models in the community, driven by ADAPT-GONG magnetograms to simulate the solar wind in the last solar cycle and found that the optimal Poynting flux parameter can be estimated from either the open field area or the average unsigned radial component of the magnetic field in the open field regions. It was also found that the average energy deposition rate (Poynting flux) in the open field regions is approximately constant. In the current study, we expand the previous work by using GONG magnetograms to simulate the solar wind for the same Carrington rotations and determine if the results are similar to the ones obtained with ADAPT-GONG magnetograms. Our results indicate that similar correlations can be obtained from the GONG maps. Moreover, we report that ADAPT-GONG magnetograms can consistently provide better comparisons with 1 AU solar wind observations than GONG magnetograms, based on the best simulations selected by the minimum of the average curve distance for the solar wind speed and density. △ Less

Submitted 3 March, 2024; originally announced March 2024.

Comments: 17 pages, 5 figures, 2 tables, submitted to ApJ

Integration of Conventional Surface Science Techniques with Surface-Sensitive Azimuthal and Polarization Dependent Femtosecond-Resolved Sum Frequency Generation Spectroscopy

Authors: Zhipeng Huang, Tobias Roos, Yu** Tong, R. Kramer Campen

Abstract: Experimental insight into the elementary processes underlying charge transfer across interfaces has blossomed with the wide-spread availability of ultra-high vacuum set-ups that allow the preparation and characterization of solid surfaces with well-defined molecular adsorbates over a wide ranges of temperatures. Thick layers of molecular adsorbates or heterostructures of 2D materials generally pre… ▽ More Experimental insight into the elementary processes underlying charge transfer across interfaces has blossomed with the wide-spread availability of ultra-high vacuum set-ups that allow the preparation and characterization of solid surfaces with well-defined molecular adsorbates over a wide ranges of temperatures. Thick layers of molecular adsorbates or heterostructures of 2D materials generally preclude the use of electrons or atoms as probes in such characterization. However with linear photon-in/photon-out techniques it is often challenging to assign the observed optical response to a particular portion of the interface. We and prior workers have demonstrated in work under ambient conditions that by full characterization of the symmetry of the second order nonlinear optical susceptibility, i.e. the $χ^{(2)}$, in sum frequency generation (SFG) spectroscopy, this problem can be overcome. Here we describe an ultra-high vacuum system built to allow conventional UHV sample preparation and characterization, femtosecond and polarization resolved SFG spectroscopy, the azimuthal sample rotation necessary to fully describe $χ^{(2)}$ symmetry and with sufficient stability to allow scanning SFG microscopy. We demonstrate these capabilities in proof-of-principle measurements on CO adsorbed on Pt(111) and of the clean Ag(111) surface. Because this set-up allows both full characterization of the nonlinear susceptibility and the temperature control and sample preparation/characterization of conventional UHV set-ups we expect it to be of great utility in investigation of both the basic physics and applications of solid, 2D material heterostructures. △ Less

Submitted 25 February, 2024; originally announced February 2024.

Formation and manipulation of diatomic rotors at the symmetry-breaking surfaces of kagome superconductors

Authors: Zihao Huang, Xianghe Han, Zhen Zhao, Haitao Yang, Hui Chen, Hong-Jun Gao

Abstract: Artificial molecular rotors and motors hold great promise for functional nanomachines, but constructing diatomic rotors, crucial for these machines, is challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom revolves around a Cs atom at the Sb surface of the newly-discovered kagome superconductor C… ▽ More Artificial molecular rotors and motors hold great promise for functional nanomachines, but constructing diatomic rotors, crucial for these machines, is challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom revolves around a Cs atom at the Sb surface of the newly-discovered kagome superconductor CsV3Sb5. The rotation rate is controlled by bias voltage between the rotor and scanning tunneling microscope (STM) tip. The spatial distribution of rates exhibits C2 symmetry, might linked to the symmetry-breaking charge orders of CsV3Sb5. We have expanded rotor construction to include different transition metals (Cr, Fe, V) and alkali metals (Cs, K). Remarkably, designed configurations of rotors are achieved through STM manipulation. Rotor orbits and quantum states are precisely controlled by tunning inter-rotor distance. Our findings establish a novel platform for the atomically precise fabrication of atomic motors on symmetry-breaking quantum materials, paving the way for advanced nanoscale devices. △ Less

Submitted 18 February, 2024; originally announced February 2024.

Comments: 17pages, 4 figures

Formation of a streamer blob via the merger of multiple plasma clumps below 2Rs

Authors: Haiyi Li, Zhenghua Huang, Kaiwen Deng, Hui Fu, Lidong Xia, Hongqiang Song, Ming Xiong, Hengyuan Wei, Youqian Qi, Chao Zhang

Abstract: Context. Propagating streamer blobs could be an important source of disturbances in the solar wind. Direct observations on formation of streamer blobs could be a proxy for understanding the formation of small-scale structures and disturbances in the solar wind. Aims. We aim to investigate how a streamer blob is formed before it is observed in the outer corona. Methods. Usingspecialcoordinated-… ▽ More Context. Propagating streamer blobs could be an important source of disturbances in the solar wind. Direct observations on formation of streamer blobs could be a proxy for understanding the formation of small-scale structures and disturbances in the solar wind. Aims. We aim to investigate how a streamer blob is formed before it is observed in the outer corona. Methods. Usingspecialcoordinated-observationsfromSOHO/LASCO,GOES/SUVIandSDO/AIA, we study the precursors of a streamer blob as seen in the corona below 2.0 solar radii (Rs). Results. We found that the streamer blob was formed due to the gradual merging of three clumps of brightenings initiated from the lower corona at about 1.8Rs, which is likely driven by expansion of the loop system at the base of the streamer. The acceleration of the blob starts from 1.9Rs or lower. It propagates along the south flank of the streamer where an expanding elongated brightening occurs coincidently. Conclusions. Our observations demonstrate that formation of a streamer blob is a complex process. We suggest that the expansion of the loop results in a pinching-off flux-rope-like blob at the loop apex below 2Rs. When the blob moves outward, it can be transferred across the overlying loops through interchange/component magnetic reconnection and then is released into the open field system. When the blob moves toward open field lines, interchange magnetic reconnections might also occur, and that can accelerate the plasma blob intermittently whilst allow it to transfer across the open field lines. Such dynamics in a streamer blob might further trigger small-scale disturbances in the solar wind such as switchbacks in the inner heliosphere. △ Less

Submitted 4 February, 2024; originally announced February 2024.

Experimental Demonstration of Attosecond Pump-Probe Spectroscopy with an X-ray Free-Electron Laser

Authors: Zhaoheng Guo, Taran Driver, Sandra Beauvarlet, David Cesar, Joseph Duris, Paris L. Franz, Oliver Alexander, Dorian Bohler, Christoph Bostedt, Vitali Averbukh, Xinxin Cheng, Louis F. DiMauro, Gilles Doumy, Ruaridh Forbes, Oliver Gessner, James M. Glownia, Erik Isele, Andrei Kamalov, Kirk A. Larsen, Siqi Li, Xiang Li, Ming-Fu Lin, Gregory A. McCracken, Razib Obaid, Jordan T. ONeal , et al. (25 additional authors not shown)

Abstract: Pump-probe experiments with sub-femtosecond resolution are the key to understanding electronic dynamics in quantum systems. Here we demonstrate the generation and control of sub-femtosecond pulse pairs from a two-colour X-ray free-electron laser (XFEL). By measuring the delay between the two pulses with an angular streaking diagnostic, we characterise the group velocity of the XFEL and demonstrate… ▽ More Pump-probe experiments with sub-femtosecond resolution are the key to understanding electronic dynamics in quantum systems. Here we demonstrate the generation and control of sub-femtosecond pulse pairs from a two-colour X-ray free-electron laser (XFEL). By measuring the delay between the two pulses with an angular streaking diagnostic, we characterise the group velocity of the XFEL and demonstrate control of the pulse delay down to 270 as. We demonstrate the application of this technique to a pump-probe measurement in core-excited para-aminophenol. These results demonstrate the ability to perform pump-probe experiments with sub-femtosecond resolution and atomic site specificity. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: 55 pages, main manuscript (5 figures) + supplementary materials (25 figures), 30 figures total. Submitted to Nature Photonics

Analytic Model and Magnetohydrodynamic Simulations of Three-dimensional Magnetic Switchbacks

Authors: Chen Shi, Marco Velli, Gabor Toth, Kun Zhang, Anna Tenerani, Zesen Huang, Nikos Sioulas, Bart van der Holst

Abstract: Parker Solar Probe observations reveal that the near-Sun space is almost filled with magnetic switchbacks (``switchbacks'' hereinafter), which may be a major contributor to the heating and acceleration of solar wind. Here, for the first time, we develop an analytic model of an axisymmetric switchback with uniform magnetic field strength. In this model, three parameters control the geometry of the… ▽ More Parker Solar Probe observations reveal that the near-Sun space is almost filled with magnetic switchbacks (``switchbacks'' hereinafter), which may be a major contributor to the heating and acceleration of solar wind. Here, for the first time, we develop an analytic model of an axisymmetric switchback with uniform magnetic field strength. In this model, three parameters control the geometry of the switchback: height (length along the background magnetic field), width (thickness along radial direction perpendicular to the background field), and the radial distance from the center of switchback to the central axis, which is a proxy of the size of the switchback along the third dimension. We carry out three-dimensional magnetohydrodynamic simulations to investigate the dynamic evolution of the switchback. Comparing simulations conducted with compressible and incompressible codes, we verify that compressibility, i.e. parametric decay instability, is necessary for destabilizing the switchback. Our simulations also reveal that the geometry of the switchback significantly affects how fast the switchback destabilizes. The most stable switchbacks are 2D-like (planar) structures with large aspect ratios (length to width), consistent with the observations. We show that when plasma beta ($β$) is smaller than one, the switchback is more stable as $β$ increases. However, when $β$ is greater than one, the switchback becomes very unstable as the pattern of the growing compressive fluctuations changes. Our results may explain some of the observational features of switchbacks, including the large aspect ratios and nearly constant occurrence rates in the inner heliosphere. △ Less

Submitted 31 March, 2024; v1 submitted 20 January, 2024; originally announced January 2024.

Journal ref: ApJL 964 L28 (2024)

Enhanced α particle generation via proton-boron fusion reactions in laser-modulated plasma

Authors: Yihang Zhang, Zhe Zhang, Yufeng Dong, Ke Fang, Haochen Gu, Yu Dai, Wei Qi, Zhigang Deng, Xiaohui Zhang, Lei Yang, Feng Lu, Zheng Huang, Kainan Zhou, Yuchi Wu, Weimin Zhou, Feng Liu, Guoqiang Zhang, Bingjun Li, Xu Zhao, Xiaohui Yuan, Chen Wang, Yutong Li

Abstract: Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3$α$ (p-$^{11}$B). However, it is difficult to achieve a thermal fusion ignition, since the low reaction cross-sections for center-of-mass energy below $\sim$100 keV. To realize fusion energy gain, it is essential to consider… ▽ More Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3$α$ (p-$^{11}$B). However, it is difficult to achieve a thermal fusion ignition, since the low reaction cross-sections for center-of-mass energy below $\sim$100 keV. To realize fusion energy gain, it is essential to consider utilization of the maximum cross-section at the resonant peak of p-$^{11}$B fusion, and explore the nuclear reactions in plasma environment. In this work, p-$^{11}$B reactions triggered by interactions between energetic proton beams and laser-ablated boron plasma have been investigated. More than 200 times enhancement of $α$ particle emission efficiency (number ratio of esca** $α$ particles and boron nuclei) in plasma has been observed, compared with the cold boron. The proton beam transport path modulated by strong electro-magnetic fields in plasma could dominate the enhanced $α$ particle generation, due to a longer collisional length. In addition, an $α$ particle yield up to 1$\times$10$^{10}$ /sr has been measured via the pitcher-catcher scheme in plasma. This work could benefit understanding of the plasma effects on nuclear reaction dynamics, and also enable opportunities to explore physics in laser fusion associated with advanced fusion fuels. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Mini-jet Clustering Algorithm Using Transverse-momentum Seeds in High-energy Nuclear Collisions

Authors: Hanpu Jiang, Nanxi Yao, Cheuk-Yin Wong, Gang Wang, Huan Zhong Huang

Abstract: We propose an algorithm to detect mini-jet clusters in high-energy nuclear collisions, by selecting a high-transverse-momentum ($p_T$) particle as a seed and assigning a clustering radius ($R$) in the pseudorapidity and azimuthal-angle space. Our PYTHIA simulations for $p$+$p$ collisions show that a scheme with a seeding $p_T$ of around 0.5 GeV/$c$ and $R$ of approximately 0.6 satisfactorily ident… ▽ More We propose an algorithm to detect mini-jet clusters in high-energy nuclear collisions, by selecting a high-transverse-momentum ($p_T$) particle as a seed and assigning a clustering radius ($R$) in the pseudorapidity and azimuthal-angle space. Our PYTHIA simulations for $p$+$p$ collisions show that a scheme with a seeding $p_T$ of around 0.5 GeV/$c$ and $R$ of approximately 0.6 satisfactorily identifies mini-jet clusters. The correlation between clusters obtained in PYTHIA calculations using the algorithm exhibits the proper behavior of hard-scattering-like processes, suggesting its usefulness in isolating mini-jet-like clusters from non-hard-scattering soft processes when applied to actual nuclear-collision data, thereby allowing a closer examination of both the mini-jet and the soft mechanisms. △ Less

Submitted 11 April, 2024; v1 submitted 12 January, 2024; originally announced January 2024.

Comments: 12 pages, 13 figures

Journal ref: Phys. Rev. C 109, 044903 (2024)

Silicon Optical Memory: Non-Volatile Optoelectronic Devices via Si-SiO$_2$ Hysteresis Effect

Authors: Yuan Yuan, Yiwei Peng, Stanley Cheung, Wayne V. Sorin, Zhihong Huang, Di Liang, Marco Fiorentino, Raymond G. Beausoleil

Abstract: Implementing on-chip non-volatile optical memories has long been an actively pursued goal, promising significant enhancements in the capability and energy efficiency of photonic integrated circuits. Here, a novel optical memory has been demonstrated exclusively using the semiconductor primary material, silicon. By manipulating the optoelectronic effect of this device, we introduce a hysteresis eff… ▽ More Implementing on-chip non-volatile optical memories has long been an actively pursued goal, promising significant enhancements in the capability and energy efficiency of photonic integrated circuits. Here, a novel optical memory has been demonstrated exclusively using the semiconductor primary material, silicon. By manipulating the optoelectronic effect of this device, we introduce a hysteresis effect at the silicon-silicon oxide interface, which in turn demonstrates multi-level, non-volatile optical data storage with robust retention and endurance. This new silicon optical memory provides a distinctively simple and accessible route to realize optical data storage in standard silicon foundry processes. △ Less

Submitted 7 January, 2024; originally announced January 2024.

Topological transmission in Suzuki phase sonic crystals

Authors: Zhen Huang, Francisco Cervera, Jiu Hui Wu, Martin Ibarias, Chongrui Liu, Victor M. Garcia-Chocano, Fuyin Ma, Jose Sanchez-Dehesa

Abstract: This work reports topological extraordinary properties of sound transmission through topological states in sonic crystals denominated Suzuki phase, consisting of a rectangular lattice of vacancies created in a triangular lattice. These low-symmetry crystals exhibit unique properties due to the embedded lattice of vacancies. A generalized folding method explains the band structure and the quasi-typ… ▽ More This work reports topological extraordinary properties of sound transmission through topological states in sonic crystals denominated Suzuki phase, consisting of a rectangular lattice of vacancies created in a triangular lattice. These low-symmetry crystals exhibit unique properties due to the embedded lattice of vacancies. A generalized folding method explains the band structure and the quasi-type-II Dirac point in the Suzuki phase, which is related to the underlying triangular lattice. In analogy to the acoustic valley Hall effect, the Suzuki phase contains three types of topological edge states on the four possible interfaces separating two Suzuki phase crystals with distinct topological phases. The edge states have defined symmetries with inherent directionality, which affect the topological sound transmission and are different from chirality, valley vorticity or helicity. Particularly, the existence of topological deaf bands is here reported. The propagation of topological eigenmodes on the same interface is also different, which is quantified using the acoustic Shannon entropy, making the topological transport dependent on the frequency of the edge states. Based on the abundant topological edge states of Suzuki phase crystals, a multifunctional device with acoustic diodes, multi-channel transmission, and selective acoustic transmission can be designed. Numerical simulations and measurements demonstrate the topological transmission. Our work extends the research platform of acoustic topological states to lattices with low symmetry, which opens new avenues for enriching topological states with broad engineering applications. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 29 pages, 9 figures, and 17 pages of supplementary materials

Realizing topological edge states in graphene-like elastic metamaterials

Authors: Zhen Huang, Penglin Gao, Federico B. Ramirez, Jorge Garcia-Tiscar, Alberto Broatch, Jiu Hui Wu, Fuyin Ma, Jose Sanchez-Dehesa

Abstract: The study of topological states in electronic structures, which allows robust transport properties against impurities and defects, has been recently extended to the realm of elasticity. This work shows that nontrivial topological flexural edge states located on the free boundary of the elastic graphene-like metamaterial can be realized without breaking the time reversal, mirror, or inversion symme… ▽ More The study of topological states in electronic structures, which allows robust transport properties against impurities and defects, has been recently extended to the realm of elasticity. This work shows that nontrivial topological flexural edge states located on the free boundary of the elastic graphene-like metamaterial can be realized without breaking the time reversal, mirror, or inversion symmetry of the system. Numerical calculations and experimental studies demonstrate the robust transport of flexural waves along the boundaries of the designed structure. The topological edge states on the free boundary are not limited by the size of the finite structure, which can reduce the scale of the topological state system. In addition, unlike the edge states localized on the free boundary in graphene where the group velocity is zero, the edge states on the elastic metamaterial plate have propagation states with non-zero group velocity. There is a frequency range for the edge states, and we introduce the concept of Shannon entropy for elastic waves and use it to assess the frequency range of the edge states in graphene-like elastic metamaterials. This work represents a relevant advance in the study of elastic wave topological states, providing a theoretical basis for engineering applications such as vibration reduction and vibration isolation of mechanical structures. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 22 pages, 8 figures, and 12 pages of supplementary information

Hydrogel modified evaporation interface for highly stable membrane distillation

Authors: Yanni Ma, Zehua Yu, Xifan Fu, Zhi Huang, Tenghui Qiu, Na Zhao, Huidong Liu, Kang Liu

Abstract: Surface effect of low-surface-tension contaminants accumulating at the evaporation surface can easily induce membrane wetting in the application of membrane distillation, especially in hypersaline scenarios. In this work, we propose a novel strategy to eliminate the surface effect and redistribute contaminants at the evaporation interface with simply incorporating a layer of hydrogel. The as-fabri… ▽ More Surface effect of low-surface-tension contaminants accumulating at the evaporation surface can easily induce membrane wetting in the application of membrane distillation, especially in hypersaline scenarios. In this work, we propose a novel strategy to eliminate the surface effect and redistribute contaminants at the evaporation interface with simply incorporating a layer of hydrogel. The as-fabricated composite membrane exhibits remarkable stability, even when exposed to extreme conditions, such as a salt concentration of 5M and surfactant concentration of 8 mM. The breakthrough pressure of the membrane is as high as 20 bars in the presence of surfactants, surpassing commercial hydrophobic membranes by one to two magnitudes. Combined study of density functional theory and molecular dynamics simulations reveals the important role of hydrogel-surfactant interaction in suppressing the surface effect. As a proof of concept, we also demonstrate the stable performance of the membrane in processing synthetic wastewater containing surfactants of 144 mg L-1, mineral oils of 1g L-1 and NaCl of 192 g L-1, showing potential of the membrane in addressing challenges of hypersaline water treatment and zero liquid discharge processes. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 24 pages, 12 figures

Waveform Simulation in PandaX-4T

Authors: Jiafu Li, Abdusalam Abdukerim, Chen Cheng, Zihao Bo, Wei Chen, Xun Chen, Yunhua Chen, Zhaokan Cheng, Xiangyi Cui, Yingjie Fan, Deqing Fang, Changbo Fu, Mengting Fu, Lisheng Geng, Karl Giboni, Linhui Gu, Xuyuan Guo, Chencheng Han, Ke Han, Changda He, **rong He, Di Huang, Yanlin Huang, Zhou Huang, Ruquan Hou , et al. (66 additional authors not shown)

Abstract: Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considera… ▽ More Signal reconstruction through software processing is a crucial component of the background and signal models in the PandaX-4T experiment, which is a multi-tonne dark matter direct search experiment. The accuracy of signal reconstruction is influenced by various detector artifacts, including noise, dark count of photomultiplier, impurity photoionization in the detector, and other relevant considerations. In this study, we present a detailed description of a semi-data-driven approach designed to simulate the signal waveform. This work provides a reliable model for the efficiency and bias of the signal reconstruction in the data analysis of PandaX-4T. By comparing critical variables which relate to the temporal shape and hit pattern of the signals, we demonstrate a good agreement between the simulation and data. △ Less

Submitted 21 May, 2024; v1 submitted 18 December, 2023; originally announced December 2023.

Journal ref: Chin. Phys. C 48, no.7,073001 (2024)

In situ Remnants of Solar Surface Structures from Jensen-Shannon Scalogram

Authors: Zesen Huang, Chen Shi, Marco Velli, Nikos Sioulas, Olga Panasenco, Trevor Bowen, Lorenzo Matteini, Mingtao Xia, Xiaofei Shi, Sheng Huang, Jia Huang, Lizet Casillas

Abstract: The heliosphere is permeated with highly structured solar wind originating from the sun. One of the primary science objectives of Parker Solar Probe (PSP) is to determine the structures and dynamics of the plasma and magnetic fields at the sources of the solar wind. However, establishing the connection between in situ measurements and structures and dynamics in the solar atmosphere is challenging:… ▽ More The heliosphere is permeated with highly structured solar wind originating from the sun. One of the primary science objectives of Parker Solar Probe (PSP) is to determine the structures and dynamics of the plasma and magnetic fields at the sources of the solar wind. However, establishing the connection between in situ measurements and structures and dynamics in the solar atmosphere is challenging: most of the magnetic footpoint map** techniques have significant uncertainties in the source localization of a plasma parcel observed in situ, and the PSP plasma measurements suffer from a limited field of view. Therefore it lacks a universal tool to self-contextualize the in situ measurements. Here we develop a novel time series visualization method named Jensen-Shannon Scalogram. Utilizing this method, by analyzing the magnetic magnitude data from both PSP and Ulysses, we successfully identify in situ remnants of solar atmospheric and magnetic structures spanning more than seven orders of magnitude, from years to seconds, including polar and mid-latitude coronal holes, as well as structures compatible with super-granulation, ``jetlets'' and very small scale flaring activity. Furthermore, computer simulations of Alfvénic turbulence support key features of the observed magnetic magnitude distribution. Building upon these discoveries, the Jensen-Shannon Scalogram therefore not only enables us to reveal the fractal fine structures in the solar wind time series from both PSP and decades-old data archive, but will also serve as a general-purpose data visualization method applicable to all time series. △ Less

Submitted 14 December, 2023; originally announced December 2023.

Solar Wind with Field Lines and Energetic Particles (SOFIE) Model: Application to Historical Solar Energetic Particle Events

Authors: Lulu Zhao, Igor Sokolov, Tamas Gombosi, David Lario, Kathryn Whitman, Zhenguang Huang, Gabor Toth, Ward Manchester, Bart van der Holst, Nishtha Sachdeva

Abstract: In this paper, we demonstrate the applicability of the data-driven and self-consistent solar energetic particle model, Solar-wind with FIeld-lines and Energetic-particles (SOFIE), to simulate acceleration and transport processes of solar energetic particles. SOFIE model is built upon the Space Weather Modeling Framework (SWMF) developed at the University of Michigan. In SOFIE, the background solar… ▽ More In this paper, we demonstrate the applicability of the data-driven and self-consistent solar energetic particle model, Solar-wind with FIeld-lines and Energetic-particles (SOFIE), to simulate acceleration and transport processes of solar energetic particles. SOFIE model is built upon the Space Weather Modeling Framework (SWMF) developed at the University of Michigan. In SOFIE, the background solar wind plasma in the solar corona and interplanetary space is calculated by the Aflvén Wave Solar-atmosphere Model(-Realtime) (AWSoM-R) driven by the near-real-time hourly updated Global Oscillation Network Group (GONG) solar magnetograms. In the background solar wind, coronal mass ejections (CMEs) are launched by placing an imbalanced magnetic flux rope on top of the parent active region, using the Eruptive Event Generator using Gibson-Low model (EEGGL). The acceleration and transport processes are modeled by the Multiple-Field-Line Advection Model for Particle Acceleration (M-FLAMPA). In this work, nine solar energetic particle events (Solar Heliospheric and INterplanetary Environment (SHINE) challenge/campaign events) are modeled. The three modules in SOFIE are validated and evaluated by comparing with observations, including the steady-state background solar wind properties, the white-light image of the CME, and the flux of solar energetic protons, at energies of > 10 MeV. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Evolution of MHD turbulence in the expanding solar wind: residual energy and intermittency

Authors: Chen Shi, Nikos Sioulas, Zesen Huang, Marco Velli, Anna Tenerani, Victor Réville

Abstract: We conduct 3D magnetohydrodynamic (MHD) simulations of decaying turbulence in the solar wind context. To account for the spherical expansion of the solar wind, we implement the expanding box model. The initial turbulence comprises uncorrelated counter-propagating Alfvén waves and exhibits an isotropic power spectrum. Our findings reveal the consistent generation of negative residual energy wheneve… ▽ More We conduct 3D magnetohydrodynamic (MHD) simulations of decaying turbulence in the solar wind context. To account for the spherical expansion of the solar wind, we implement the expanding box model. The initial turbulence comprises uncorrelated counter-propagating Alfvén waves and exhibits an isotropic power spectrum. Our findings reveal the consistent generation of negative residual energy whenever nonlinear interactions are present, independent of the normalized cross helicity $σ_c$. The spherical expansion facilitates this process. The resulting residual energy is primarily distributed in the perpendicular direction, with $[S_2(\mathbf{b})-S_2(\mathbf{u})] \propto l_\perp$ or equivalently $-E_r \propto k_\perp^{-2}$. Here $S_2(\mathbf{b})$ and $S_2(\mathbf{u})$ are second-order structure functions of magnetic field and velocity respectively. In most runs, $S_2(\mathbf{b})$ develops a scaling relation $S_2(\mathbf{b}) \propto l_\perp^{1/2}$ ($E_b \propto k_\perp^{-3/2}$). In contrast, $S_2(\mathbf{u})$ is consistently shallower than $S_2(\mathbf{b})$, which aligns with in-situ observations of the solar wind. We observe that the higher-order statistics of the turbulence, which act as a proxy for intermittency, are strongly affected by the expansion effect but have weak dependence on the initial $σ_c$. Generally, the intermittency is more pronounced when the expansion effect is present. Finally, we find that in our simulations although the negative residual energy and intermittency grow simultaneously as the turbulence evolves, there is no obvious causal relation between them because they are generated on different scales. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Fast modeling of regenerative amplifier free-electron lasers

Authors: River R. Robles, Aliaksei Halavanau, Gabriel Marcus, Zhirong Huang

Abstract: High-gain free-electron lasers (FELs) are becoming important light sources at short wavelengths such as the EUV and X-ray regimes. A particularly promising concept is the regenerative amplifier FEL (RAFEL), which can greatly increase the brightness and stability of a single pass device. One of the critical challenges of the x-ray RAFEL is maintaining electron-optical overlap over the relatively la… ▽ More High-gain free-electron lasers (FELs) are becoming important light sources at short wavelengths such as the EUV and X-ray regimes. A particularly promising concept is the regenerative amplifier FEL (RAFEL), which can greatly increase the brightness and stability of a single pass device. One of the critical challenges of the x-ray RAFEL is maintaining electron-optical overlap over the relatively large (hundreds of meters) footprint of the system. Numerical modeling of x-ray RAFELs with angular and positional errors is critical for designing stable cavities, as well as to predict signatures of specific misalignment effects. Full-scale simulations of x-ray FELs are incredibly time-consuming, making large-scale parameter searches intractable on reasonable timescales. In this paper, we present a semi-analytical model that allows to investigate realistic scenarios - x-ray cavity without gain ("cold cavity" or x-ray FEL oscillator) and x-ray RAFEL - in the presence of angular/positional errors and electron trajectory oscillation. We especially focus on fast modeling of the FEL process and x-ray optics, while capturing effects pertaining to actual experimental setups at the Linac Coherent Light Source (LCLS) at SLAC. Such a method can be used to explore RAFEL at other wavelengths by suitable replacement of the optics modeling. △ Less

Submitted 22 November, 2023; v1 submitted 9 August, 2023; originally announced August 2023.

Epidemic spreading under game-based self-quarantine behaviors guided by local and global infection information

Authors: Zegang Huang, Xincheng Shu, Qi Xuan, Zhongyuan Ruan

Abstract: During the outbreak of an epidemic, individuals may modify their behaviors in response to external (including local and global) infection-related information. However, the difference between local and global information in influencing the spread of diseases remains inadequately explored. Here we study a simple epidemic model that incorporates the game-based self-quarantine behavior of individuals,… ▽ More During the outbreak of an epidemic, individuals may modify their behaviors in response to external (including local and global) infection-related information. However, the difference between local and global information in influencing the spread of diseases remains inadequately explored. Here we study a simple epidemic model that incorporates the game-based self-quarantine behavior of individuals, taking into account the influence of local infection status, global disease prevalence and node heterogeneity (i.e., non-uniform node degrees). Our findings reveal that local information can effectively contain an epidemic, even with only a small proportion of individuals opting for self-quarantine. On the other hand, global information can induce oscillations in infection evolution curves during the declining phase of an epidemic, owing to the synchronous release of nodes with the same degree from the quarantined state. In contrast, the releasing pattern under the local information appears to be more random. This oscillation phenomenon can be observed in various types of networks associated with different characteristics. Significantly, our model is essentially different from conventional epidemic models in that the network heterogeneity plays a negative role in the spread of epidemics, which is contrary to the previous findings. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Comments: 7 pages, 6 figures

Broadband Dispersive-Wave Emission Coupled with Two-Stage Soliton Self-Compression in Gas-Filled Anti-Resonant Hollow-Core Fibers

Authors: **yu Pan, Zhiyuan Huang, Yifei Chen, Fei Yu, Dakun Wu, Tiandao Chen, Donghan Liu, Yue Yu, Xin Jiang, Meng Pang, Yuxin Leng, Ruxin Li

Abstract: We studied the underlying mechanism of broadband dispersive-wave emission within a resonance band of gas-filled anti-resonant hollow-core fiber. Both theoretical and experimental results unveiled that the high-order soliton, launched into the hollow-core fiber, experienced two stages of pulse compression, resulting in a multi-peak structure of the dispersive-wave spectrum. Over the first-stage pul… ▽ More We studied the underlying mechanism of broadband dispersive-wave emission within a resonance band of gas-filled anti-resonant hollow-core fiber. Both theoretical and experimental results unveiled that the high-order soliton, launched into the hollow-core fiber, experienced two stages of pulse compression, resulting in a multi-peak structure of the dispersive-wave spectrum. Over the first-stage pulse compression, a sharp increase of the pulse peak power triggered the first time of dispersion-wave emission, and simultaneously caused ionization of the noble gas filled in the fiber core. Strong soliton-plasma interactions led to blue shifting of the pump pulse, and the blue-shifted pulse experienced a decreasing dispersion value in the fiber waveguide, resulting in an increase of its soliton order. Then, the second-stage pulse compression due to the high-order soliton effect triggered the second time of dispersive-wave emission at a phase-matched frequency slightly lower than that in the first stage. Multi-peak spectra of the output dispersive-waves and their formation dynamics were clearly observed in our experiments, which can be understood using a delicate coupling mechanism among three nonlinear effects including high-order-soliton compression, soliton-plasma interaction and phase-matched dispersive-wave emission. The output broadband dispersive-wave could be potentially compressed to sub-30 fs duration using precise chirp-compensation technique. △ Less

Submitted 30 July, 2023; originally announced July 2023.

Event Shape Selection Method in Search of the Chiral Magnetic Effect in Heavy-ion Collisions

Authors: Zhiwan Xu, Brian Chan, Gang Wang, Aihong Tang, Huan Zhong Huang

Abstract: The search for the chiral magnetic effect (CME) in heavy-ion collisions has been impeded by the significant background arising from the anisotropic particle emission pattern, particularly elliptic flow. To alleviate this background, the event shape selection (ESS) technique categorizes collision events according to their shapes and projects the CME observables to a class of events with minimal flo… ▽ More The search for the chiral magnetic effect (CME) in heavy-ion collisions has been impeded by the significant background arising from the anisotropic particle emission pattern, particularly elliptic flow. To alleviate this background, the event shape selection (ESS) technique categorizes collision events according to their shapes and projects the CME observables to a class of events with minimal flow. In this study, we explore two event shape variables to classify events and two elliptic flow variables to regulate the background. Each type of variable can be calculated from either single particles or particle pairs, resulting in four combinations of event shape and elliptic flow variables. By employing a toy model and the realistic event generator, event-by-event anomalous-viscous fluid dynamics (EBE-AVFD), we discover that the elliptic flow of resonances exhibits correlations with both the background and the potential CME signal, making the resonance flow unsuitable for background control. Through the EBE-AVFD simulations of Au+Au collisions at $\sqrt{s_{NN}} = 200$ GeV with various input scenarios, we ascertain that the optimal ESS strategy for background control entails utilizing the single-particle elliptic flow in conjunction with the event shape variable based on particle pairs. △ Less

Submitted 6 December, 2023; v1 submitted 25 July, 2023; originally announced July 2023.

Journal ref: Physics Letters B, Volume 848, January 2024, 138367

Neutron Activation Background in the NvDEx Experiment

Authors: Qianming Wang, Zeyu Huang, Pengchong Hu, Emilio Ciuffoli

Abstract: An extremely low-background environment is a crucial requirement for any neutrinoless double beta decay experiment. Neutrons are very difficult to stop, because they can pass through the shields and activate nuclei in the detector, even inside the fiducial volume itself. Using Geant4 simulations we have studied the neutron background for N$ν$DEx-100 and the most efficient way to reduce it. Using a… ▽ More An extremely low-background environment is a crucial requirement for any neutrinoless double beta decay experiment. Neutrons are very difficult to stop, because they can pass through the shields and activate nuclei in the detector, even inside the fiducial volume itself. Using Geant4 simulations we have studied the neutron background for N$ν$DEx-100 and the most efficient way to reduce it. Using a 60 cm thick external HDPE shield the neutron background can be reduced down to $0.24\pm 0.06$ events/year, lower than the background rate due to natural radioactivity (0.42 events/year), which was used as a benchmark for these calculations. The amount of shielding material needed can be significantly reduced by placing HDPE in the empty space between the lead shield and the steel vessel; in this way, it is sufficient to add 20 cm external HDPE shield to reduce the neutron background down to $0.15\pm0.05$ events/year. △ Less

Submitted 24 July, 2023; originally announced July 2023.

Comments: 13 pages, 11 figures

Active Q-switched X-Ray Regenerative Amplifier Free-Electron Laser

Authors: **gyi Tang, Zhen Zhang, Jenny Morgan, Erik Hemsing, Zhirong Huang

Abstract: Despite tremendous progress in x-ray free-electron laser (FEL) science over the last decade, future applications still demand fully coherent, stable x-rays that have not been demonstrated in existing X-ray FEL facilities. In this Letter, we describe an active Q-switched x-ray regenerative amplifier FEL scheme to produce fully coherent, high-brightness, hard x rays at a high-repetition rate. By usi… ▽ More Despite tremendous progress in x-ray free-electron laser (FEL) science over the last decade, future applications still demand fully coherent, stable x-rays that have not been demonstrated in existing X-ray FEL facilities. In this Letter, we describe an active Q-switched x-ray regenerative amplifier FEL scheme to produce fully coherent, high-brightness, hard x rays at a high-repetition rate. By using simple electron-beam phase space manipulation, we show this scheme is flexible in controlling the x-ray cavity quality factor Q and hence the output radiation. We report both theoretical and numerical studies on this scheme with a wide range of accelerator, x-ray cavity, and undulator parameters. △ Less

Submitted 20 July, 2023; originally announced July 2023.

XCC: An X-ray FEL-based $γγ$ Compton Collider Higgs Factory

Authors: T. Barklow, C. Emma, Z. Huang, A. Naji, E. Nanni, A. Schwartzman, S. Tantawi, G. White

Abstract: This report describes the conceptual design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 80,000 Higgs bosons per 10$^7$ second year, roughly the same as the ILC Higgs rate at $\sqrt{s}$=250 GeV. The electron accelerator is based on cold copper dis… ▽ More This report describes the conceptual design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 80,000 Higgs bosons per 10$^7$ second year, roughly the same as the ILC Higgs rate at $\sqrt{s}$=250 GeV. The electron accelerator is based on cold copper distributed coupling (C$^3$) accelerator technology. Unlike the center-of-mass energy spectra of previous optical wavelength $γγ$ collider designs, the sharply peaked $γγ$ center-of-mass energy spectrum of XCC produces model independent Higgs coupling measurements with precision on par with $e^+e^-$ colliders. For the triple Higgs coupling measurement, the XCC center-of-mass energy can be upgraded to 380 GeV, where the cross section for $γγ\rightarrow HH$ is twice that of $e^+e^- \rightarrow ZHH$ at $\sqrt{s}$=500 GeV. Design challenges are discussed, along with the R\&D to address them, including demonstrators. △ Less

Submitted 11 July, 2023; v1 submitted 14 June, 2023; originally announced June 2023.

Comments: 30 pages, 21 figures, improved hadronic background calculation including QCD rad corr; accepted for publication by JINST. arXiv admin note: substantial text overlap with arXiv:2203.08484

Report number: SLAC-PUB-17734

Semantic Segmentation of Anomalous Diffusion Using Deep Convolutional Networks

Authors: Xiang Qu, Yi Hu, Wenjie Cai, Yang Xu, Hu Ke, Guolong Zhu, Zihan Huang

Abstract: Heterogeneous dynamics commonly emerges in anomalous diffusion with intermittent transitions of diffusion states but proves challenging to identify using conventional statistical methods. To effectively capture these transient changes of diffusion states, we propose a deep learning model (U-AnDi) for the semantic segmentation of anomalous diffusion trajectories. This model is developed with the di… ▽ More Heterogeneous dynamics commonly emerges in anomalous diffusion with intermittent transitions of diffusion states but proves challenging to identify using conventional statistical methods. To effectively capture these transient changes of diffusion states, we propose a deep learning model (U-AnDi) for the semantic segmentation of anomalous diffusion trajectories. This model is developed with the dilated causal convolution (DCC), gated activation unit (GAU), and U-Net architecture. The study addresses two key subtasks related to trajectory segmentation and changepoint detection, concentrating on variations in diffusion exponents and dynamic models. Additionally, extended analyses are conducted on the segmentation of single-model trajectories, multi-state biological trajectories, and anomalous diffusion with added long-time correlations. By rationally designing comparative models and evaluating the performance of U-AnDi against these models, we discover that U-AnDi consistently outperforms other models across all segmentation tasks, thereby affirming its superiority in the field. This performance edge also sheds light on the interpretability of U-AnDi's core components: DCC, GAU, and U-Net. The clarity with which these components contribute to U-AnDi's success underscores their congruence with the intrinsic physics underlying anomalous diffusion. Furthermore, our model is examined using real-world anomalous diffusion data: the diffusion of transmembrane proteins on cell membrane surfaces, and the segmentation results are highly consistent with experimental observations. Our findings could offer a heuristic deep learning solution for the detection of heterogeneous dynamics in single-molecule/particle tracking experiments, and have the potential to be generalized as a universal scheme for time-series segmentation. △ Less

Submitted 20 November, 2023; v1 submitted 29 April, 2023; originally announced May 2023.

Comments: 26 pages, 18 figures

Journal ref: Physical Review Research 6, 013054, 2024

The background model of the CUPID-Mo $0νββ$ experiment

Authors: CUPID-Mo Collaboration, :, C. Augier, A. S. Barabash, F. Bellini, G. Benato, M. Beretta, L. Bergé, J. Billard, Yu. A. Borovlev, L. Cardani, N. Casali, A. Cazes, E. Celi, M. Chapellier, D. Chiesa, I. Dafinei, F. A. Danevich, M. De Jesus, P. de Marcillac, T. Dixon, L. Dumoulin, K. Eitel, F. Ferri, B. K. Fujikawa , et al. (58 additional authors not shown)

Abstract: CUPID-Mo, located in the Laboratoire Souterrain de Modane (France), was a demonstrator for the next generation $0νββ$ decay experiment, CUPID. It consisted of an array of 20 enriched Li$_{2}$$ ^{100}$MoO$_4$ bolometers and 20 Ge light detectors and has demonstrated that the technology of scintillating bolometers with particle identification capabilities is mature. Furthermore, CUPID-Mo can inform… ▽ More CUPID-Mo, located in the Laboratoire Souterrain de Modane (France), was a demonstrator for the next generation $0νββ$ decay experiment, CUPID. It consisted of an array of 20 enriched Li$_{2}$$ ^{100}$MoO$_4$ bolometers and 20 Ge light detectors and has demonstrated that the technology of scintillating bolometers with particle identification capabilities is mature. Furthermore, CUPID-Mo can inform and validate the background prediction for CUPID. In this paper, we present a detailed model of the CUPID-Mo backgrounds. This model is able to describe well the features of the experimental data and enables studies of the $2νββ$ decay and other processes with high precision. We also measure the radio-purity of the Li$_{2}$$^{100}$MoO$_4$ crystals which are found to be sufficient for the CUPID goals. Finally, we also obtain a background index in the region of interest of 3.7$^{+0.9}_{-0.8}$(stat)$^{+1.5}_{-0.7}$(syst)$\times10^{-3}$counts/$Δ$E$_{FWHM}$/mol$_{iso}$/yr, the lowest in a bolometric $0νββ$ decay experiment. △ Less

Submitted 2 May, 2023; originally announced May 2023.

Electron-infrared phonon coupling in ABC trilayer graphene

Authors: Xiaozhou Zan, Xiangdong Guo, Aolin Deng, Zhiheng Huang, Le Liu, Fanfan Wu, Yalong Yuan, Jiaojiao Zhao, Yalin Peng, Lu Li, Yangkun Zhang, Xiuzhen Li, Jundong Zhu, **gwei Dong, Dongxia Shi, Wei Yang, Xiaoxia Yang, Zhiwen Shi, Luojun Du, Qing Dai, Guangyu Zhang

Abstract: Stacking order plays a crucial role in determining the crystal symmetry and has significant impacts on electronic, optical, magnetic, and topological properties. Electron-phonon coupling, which is central to a wide range of intriguing quantum phenomena, is expected to be intricately connected with stacking order. Understanding the stacking order-dependent electron-phonon coupling is essential for… ▽ More Stacking order plays a crucial role in determining the crystal symmetry and has significant impacts on electronic, optical, magnetic, and topological properties. Electron-phonon coupling, which is central to a wide range of intriguing quantum phenomena, is expected to be intricately connected with stacking order. Understanding the stacking order-dependent electron-phonon coupling is essential for understanding peculiar physical phenomena associated with electron-phonon coupling, such as superconductivity and charge density waves. In this study, we investigate the effect of stacking order on electron-infrared phonon coupling in graphene trilayers. By using gate-tunable Raman spectroscopy and excitation frequency-dependent near-field infrared nanoscopy, we show that rhombohedral ABC-stacked trilayer graphene has a significantly stronger electron-infrared phonon coupling strength than the Bernal ABA-stacked trilayer graphene. Our findings provide novel insights into the superconductivity and other fundamental physical properties of rhombohedral ABC-stacked trilayer graphene, and can enable nondestructive and high-throughput imaging of trilayer graphene stacking order using Raman scattering. △ Less

Submitted 28 April, 2023; originally announced April 2023.

Why "solar tsunamis" rarely leave their imprints in the chromosphere

Authors: Ruisheng Zheng, Yihan Liu, Wenlong Liu, Bing Wang, Zhenyong Hou, Shiwei Feng, Xiangliang Kong, Zhenghua Huang, Hongqiang Song, Hui Tian, Pengfei Chen, Robertus Erdélyi, Yao Chen

Abstract: Solar coronal waves frequently appear as bright disturbances that propagate globally from the eruption center in the solar atmosphere, just like the tsunamis in the ocean on Earth. Theoretically, coronal waves can sweep over the underlying chromosphere and leave an imprint in the form of Moreton wave, due to the enhanced pressure beneath their coronal wavefront. Despite the frequent observations o… ▽ More Solar coronal waves frequently appear as bright disturbances that propagate globally from the eruption center in the solar atmosphere, just like the tsunamis in the ocean on Earth. Theoretically, coronal waves can sweep over the underlying chromosphere and leave an imprint in the form of Moreton wave, due to the enhanced pressure beneath their coronal wavefront. Despite the frequent observations of coronal waves, their counterparts in the chromosphere are rarely detected. Why the chromosphere rarely bears the imprints of solar tsunamis remained a mystery since their discovery three decades ago. To resolve this question, all coronal waves and associated Moreton waves in the last decade have been initially surveyed, though the detection of Moreton waves could be hampered by utilising the low-quality H$α$ data from Global Oscillations Network Group. Here, we present 8 cases (including 5 in Appendix) of the coexistence of coronal and Moreton waves in inclined eruptions where it is argued that the extreme inclination is key to providing an answer to address the question. For all these events, the lowest part of the coronal wavefront near the solar surface appears very bright, and the simultaneous disturbances in the solar transition region and the chromosphere predominantly occur beneath the bright segment. Therefore, evidenced by observations, we propose a scenario for the excitation mechanism of the coronal-Moreton waves in highly inclined eruptions, in which the lowest part of a coronal wave can effectively disturb the chromosphere even for a weak (e.g., B-class) solar flare. △ Less

Submitted 28 April, 2023; originally announced April 2023.

Comments: 24 pages, 14 figures

AI-aided Geometric Design of Anti-infection Catheters

Authors: Tingtao Zhou, Xuan Wan, Daniel Zhengyu Huang, Zongyi Li, Zhiwei Peng, Anima Anandkumar, John F. Brady, Paul W. Sternberg, Chiara Daraio

Abstract: Bacteria can swim upstream due to hydrodynamic interactions with the fluid flow in a narrow tube, and pose a clinical threat of urinary tract infection to patients implanted with catheters. Coatings and structured surfaces have been proposed as a way to suppress bacterial contamination in catheters. However, there is no surface structuring or coating approach to date that thoroughly addresses the… ▽ More Bacteria can swim upstream due to hydrodynamic interactions with the fluid flow in a narrow tube, and pose a clinical threat of urinary tract infection to patients implanted with catheters. Coatings and structured surfaces have been proposed as a way to suppress bacterial contamination in catheters. However, there is no surface structuring or coating approach to date that thoroughly addresses the contamination problem. Here, based on the physical mechanism of upstream swimming, we propose a novel geometric design, optimized by an AI model predicting in-flow bacterial dynamics. The AI method, based on Fourier neural operator, offers significant speedups over traditional simulation methods. Using Escherichia coli, we demonstrate the anti-infection mechanism in quasi-2D micro-fluidic experiments and evaluate the effectiveness of the design in 3Dprinted prototype catheters under clinical flow rates. Our catheter design shows 1-2 orders of magnitude improved suppression of bacterial contamination at the upstream end of the catheter, potentially prolonging the in-dwelling time for catheter use and reducing the overall risk of catheter-associated urinary tract infections. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Comments: maint text 4 figures, SI 5 figures

The properties of small magnetic flux ropes inside the solar wind come from coronal holes, active regions, and quiet Sun

Authors: Changhao Zhai, Hui Fu, Jiachen Si, Zhenghua Huang, Lidong Xia

Abstract: The origination and generation mechanisms of small magnetic flux ropes (SFRs), which are important structures in solar wind, are not clearly known. In present study, 1993 SFRs immersed in coronal holes, active regions, and quiet Sun solar wind are analyzed and compared. We find that the properties of SFRs immersed in three types of solar wind are signicantly different. The SFRs are further classif… ▽ More The origination and generation mechanisms of small magnetic flux ropes (SFRs), which are important structures in solar wind, are not clearly known. In present study, 1993 SFRs immersed in coronal holes, active regions, and quiet Sun solar wind are analyzed and compared. We find that the properties of SFRs immersed in three types of solar wind are signicantly different. The SFRs are further classifed into hot-SFRs, cold-SFRs, and normal-SFRs, according to whether the O7+/O6+ is 30% elevated or dropped inside SFRs as compared with background solar wind. Our studies show that the parameters of normal-SFRs are similar to background in all three types of solar wind. The properties of hot-SFRs and cold-SFRs seem to be lying in two extremes. Statistically, the hot-SFRs (cold-SFRs) are associated with longer (shorter) duration, lower (higher) speeds and proton temperatures, higher (lower) charge states, helium abundance, and FIP bias as compared with normal-SFRs and background solar wind. The anti-correlations between speed and O7+/O6+ inside hot-SFRs (normal-SFRs) are different from (similar to) those in background solar wind. Most of hot-SFRs and cold-SFRs should come from the Sun. Hot-SFRs may come from streamers associated with plasma blobs and/or small-scale activities on the Sun. Cold-SFRs may be accompanied by small-scale eruptions with lower-temperature materials. Both hot-SFRs and cold-SFRs could also be formed by magnetic erosions of ICMEs that do not contain or contain cold-filament materials. The characteristics of normal-SFRs can be explained reasonably by the two originations, from the Sun and generated in the heliosphere both. △ Less

Submitted 23 April, 2023; originally announced April 2023.

Comments: 19 pages, 5 figures

NvDEx-100 Conceptual Design Report

Authors: X. Cao, Y. Chang, K. Chen, E. Ciuffoli, L. Duan, D. Fang, C. Gao, S. K. Ghorui, P. Hu, Q. Hu, S. Huang, Z. Huang, L. Lang, Y. Li, Z. Li, T. Liang, J. Liu, C. Lu, F. Mai, Y. Mei, H. Qiu, X. Sun, X. Tang, H. Wang, Q. Wang , et al. (12 additional authors not shown)

Abstract: Observing nuclear neutrinoless double beta (0vbb) decay would be a revolutionary result in particle physics. Observing such a decay would prove that the neutrinos are their own antiparticles, help to study the absolute mass of neutrinos, explore the origin of their mass, and may explain the matter-antimatter asymmetry in our universe by lepton number violation. We propose develo** a time proje… ▽ More Observing nuclear neutrinoless double beta (0vbb) decay would be a revolutionary result in particle physics. Observing such a decay would prove that the neutrinos are their own antiparticles, help to study the absolute mass of neutrinos, explore the origin of their mass, and may explain the matter-antimatter asymmetry in our universe by lepton number violation. We propose develo** a time projection chamber (TPC) using high-pressure 82SeF6 gas and top-metal silicon sensors for read-out in the China **** Underground Laboratory (CJPL) to search for neutrinoless double beta decay of 82Se, called the NvDEx experiment. Besides being located at CJPL with the world's thickest rock shielding, NvDEx combines the advantages of the high Qbb (2.996 MeV) of 82Se and the TPC's ability to distinguish signal and background events using their different topological characteristics. This makes NvDEx unique, with great potential for low-background and high-sensitivity 0vbb searches. NvDEx-100, a NvDEx experiment phase with 100 kg of SeF6 gas, is being built, with plans to complete installation at CJPL by 2025. This report introduces 0vbb physics, the NvDEx concept and its advantages, and the schematic design of NvDEx-100, its subsystems, and background and sensitivity estimation. △ Less

Submitted 1 December, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Journal ref: Nuclear Science and Techniques (2024) 35:3

Deep-Learning-based Vasculature Extraction for Single-Scan Optical Coherence Tomography Angiography

Authors: **peng Liao, Tianyu Zhang, Yilong Zhang, Chunhui Li, Zhihong Huang

Abstract: Optical coherence tomography angiography (OCTA) is a non-invasive imaging modality that extends the functionality of OCT by extracting moving red blood cell signals from surrounding static biological tissues. OCTA has emerged as a valuable tool for analyzing skin microvasculature, enabling more accurate diagnosis and treatment monitoring. Most existing OCTA extraction algorithms, such as speckle v… ▽ More Optical coherence tomography angiography (OCTA) is a non-invasive imaging modality that extends the functionality of OCT by extracting moving red blood cell signals from surrounding static biological tissues. OCTA has emerged as a valuable tool for analyzing skin microvasculature, enabling more accurate diagnosis and treatment monitoring. Most existing OCTA extraction algorithms, such as speckle variance (SV)- and eigen-decomposition (ED)-OCTA, implement a larger number of repeated (NR) OCT scans at the same position to produce high-quality angiography images. However, a higher NR requires a longer data acquisition time, leading to more unpredictable motion artifacts. In this study, we propose a vasculature extraction pipeline that uses only one-repeated OCT scan to generate OCTA images. The pipeline is based on the proposed Vasculature Extraction Transformer (VET), which leverages convolutional projection to better learn the spatial relationships between image patches. In comparison to OCTA images obtained via the SV-OCTA (PSNR: 17.809) and ED-OCTA (PSNR: 18.049) using four-repeated OCT scans, OCTA images extracted by VET exhibit moderate quality (PSNR: 17.515) and higher image contrast while reducing the required data acquisition time from ~8 s to ~2 s. Based on visual observations, the proposed VET outperforms SV and ED algorithms when using neck and face OCTA data in areas that are challenging to scan. This study represents that the VET has the capacity to extract vascularture images from a fast one-repeated OCT scan, facilitating accurate diagnosis for patients. △ Less

Submitted 3 May, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

A femtosecond time resolved view of vibrationally assisted electron transfer across the metal/aqueous interface

Authors: Zhipeng Huang, Manuel Bridger, Oscar A Naranjo-Montoya, Alexander Tarasevitch, Uwe Bovensiepen, Yu** Tong, R. Kramer Campen

Abstract: Understanding heterogeneous charge transfer is crucial if we are to build the best electrolyzers, fuel cells and photoelectrochemical water splitting devices that chemistry allows. Because the elementary processes involved have timescales ranging from femto- to milliseconds, direct simulation is not generally possible. Model Hamiltonian approaches thus have a crucial role in gaining mechanistic in… ▽ More Understanding heterogeneous charge transfer is crucial if we are to build the best electrolyzers, fuel cells and photoelectrochemical water splitting devices that chemistry allows. Because the elementary processes involved have timescales ranging from femto- to milliseconds, direct simulation is not generally possible. Model Hamiltonian approaches thus have a crucial role in gaining mechanistic insight. Current generations of such theories describe a reactant(s) or product(s) that interacts with electrolyte via a single effective interaction. Such approaches thus obscure the extent to which particular solvent fluctuations influence charge transfer. Here we demonstrate experimentally that for a prototypical system, a ferrocene terminated alkane thiol self-assembled monolayer (SAM) on gold in contact with aqueous electrolyte, charge transfer from the Au to the ferrocene can be induced by vibrational excitation of the ferrocene aromatic CH. Intriguingly the energy of the aromatic CH vibration, 0.38 eV, is a large fraction of the effective solvent interaction strength inferred for the ferrocene/ferrocenium system in prior electrochemical studies: 0.85 eV. Our results thus demonstrate the coupling of charge transfer to a specific solvent motion and more generally imply that solvent may affect reduction/oxidation rates in electrocatalysis by coupling to a few distinct solvent motions. Identifying these motions is crucial in rationalizing trends in reactivity with change in electrolyte and thus in pursuing electrolyte engineering from first principles. △ Less

Submitted 13 April, 2023; originally announced April 2023.

Comments: 18 pages, 6 figures

A first test of CUPID prototypal light detectors with NTD-Ge sensors in a pulse-tube cryostat

Authors: CUPID collaboration, K. Alfonso, A. Armatol, C. Augier, F. T. Avignone III, O. Azzolini, M. Balata, A. S. Barabash, G. Bari, A. Barresi, D. Baudin, F. Bellini, G. Benato, V. Berest, M. Beretta, M. Bettelli, M. Biassoni, J. Billard, V. Boldrini, A. Branca, C. Brofferio, C. Bucci, J. Camilleri, A. Campani, C. Capelli , et al. (154 additional authors not shown)

Abstract: CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ~250 kg of isotopic mass of $^{100}$Mo. It will operate at $\sim$10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of… ▽ More CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ~250 kg of isotopic mass of $^{100}$Mo. It will operate at $\sim$10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of $^{100}$Mo-enriched Li$_2$MoO$_4$ crystals, facing thin Ge-wafer-based bolometric light detectors. In the CUPID design, the detector structure is novel and needs to be validated. In particular, the CUORE cryostat presents a high level of mechanical vibrations due to the use of pulse tubes and the effect of vibrations on the detector performance must be investigated. In this paper we report the first test of the CUPID-design bolometric light detectors with NTD-Ge sensors in a dilution refrigerator equipped with a pulse tube in an above-ground lab. Light detectors are characterized in terms of sensitivity, energy resolution, pulse time constants, and noise power spectrum. Despite the challenging noisy environment due to pulse-tube-induced vibrations, we demonstrate that all the four tested light detectors comply with the CUPID goal in terms of intrinsic energy resolution of 100 eV RMS baseline noise. Indeed, we have measured 70--90 eV RMS for the four devices, which show an excellent reproducibility. We have also obtained outstanding energy resolutions at the 356 keV line from a $^{133}$Ba source with one light detector achieving 0.71(5) keV FWHM, which is -- to our knowledge -- the best ever obtained when compared to $γ$ detectors of any technology in this energy range. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: Prepared for submission to JINST; 16 pages, 7 figures, and 1 table