-
An Ultra-Sensitive Visible-IR Range Fiber Based Plasmonic Refractive Index Sensor
Authors:
Mohammad Al Mahfuz,
Sumaiya Afroj,
Md. Azad Hossain,
Md. Anwar Hossain,
Afiquer Rahman,
Md Selim Habib
Abstract:
Photonic crystal fiber (PCF)-based plasmonic sensors have gained considerable attention because of their highly sensitive performance and broad range of sensing regimes. In this work, a relatively simple ultra-sensitive PCF-based surface plasmon resonance (SPR) sensor has been proposed for detecting different analyte refractive indices (RIs) ranging from 1.33 to 1.43 over a wide range of wavelengt…
▽ More
Photonic crystal fiber (PCF)-based plasmonic sensors have gained considerable attention because of their highly sensitive performance and broad range of sensing regimes. In this work, a relatively simple ultra-sensitive PCF-based surface plasmon resonance (SPR) sensor has been proposed for detecting different analyte refractive indices (RIs) ranging from 1.33 to 1.43 over a wide range of wavelength spectrum spanning 0.55 $μ$m to 3.50 $μ$m. The comprehensive finite-element simulations indicate that it is possible to achieve remarkable sensing performances such as wavelength sensitivity (WS) and figure of merit (FOM) as high as 123,000 nm/RIU and 683 RIU$^{-1}$, respectively, and extremely low values of wavelength resolution (WR) of 8.13 x 10$^{-8}$ RIU. In addition, a novel artificial neural network (ANN) model is proposed to be integrated into the practical setup in order to accurately predict the RIs by carefully examining the simulation data. The mean square error (MSE) and accuracy ($R^2$) values for the ANN model are found about 0.0097 and 0.9987, respectively, indicating the high prediction capability of the proposed ANN model. Due to its exceptional sensitivity and precise detection capabilities, the proposed device has the potential to serve as a viable option for sensing analyte refractive index (RI). Additionally, the sensor could be utilized for identifying cancerous cells and detecting urinary tract infections in humans.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
First-principles calculations to investigate structural, elastic, electronic, thermodynamic, and thermoelectric properties of CaPd$_3$B$_4$O$_{12}$ (B = Ti, V) perovskite
Authors:
M. H. K. Rubel,
M. A. Hossain,
M. Khalid Hossain,
K. M. Hossain,
A. A. Khatun,
M. M. Rahaman,
Md. Ferdous Rahman,
M. M. Hossain,
J. Hossain
Abstract:
This study has explored numerous physical properties of CaPd$_3$Ti$_4$O$_{1}$2 (CPTO) and CaPd$_3$V$_4$O$_{12}$ (CPVO) quadruple perovskites employing the density functional theory (DFT) method. The mechanical permanence of these two compounds was observed by the Born stability criteria as well. The band structure of CPTO reveals a 0.88 and 0.46 eV direct narrow band gap while using GGA-mBJ and GG…
▽ More
This study has explored numerous physical properties of CaPd$_3$Ti$_4$O$_{1}$2 (CPTO) and CaPd$_3$V$_4$O$_{12}$ (CPVO) quadruple perovskites employing the density functional theory (DFT) method. The mechanical permanence of these two compounds was observed by the Born stability criteria as well. The band structure of CPTO reveals a 0.88 and 0.46 eV direct narrow band gap while using GGA-mBJ and GGA-PBE potentials, respectively, which is an indication of its fascinating semiconducting nature. The calculated partial density of states indicates the strong hybridization between Pd-4d and O-2p orbital electrons for CPTO, whereas Pd-4d and V-3d-O-2p for CPVO. The study of the chemical bonding nature and electronic charge distribution graph reveals the coexistence of covalent O-V/Pd bonds, ionic O-Ti/Ca bonds, as well as metallic Ti/V-Ti/V bonding for both compounds. The Fermi surface of CPVO ensures a kind of hole as well as electron faces simultaneously, indicating the multifarious band characteristic. The prediction of the static real dielectric function (optical property) of CPTO at zero energy implies its promising dielectric nature. The photoconductivity and absorption coefficient of CPBO display good qualitative compliance with the consequences of band structure computations. The calculated thermodynamic properties manifest the thermodynamical stability for CPBO, whereas phonon dispersions of CPVO exhibit stable phonon dispersion in contrast to slightly unstable phonon dispersion of CPTO. The predicted Debye temperature ($θ_D$) has been utilized to correlate its topical features including thermoelectric behaviors. The studied thermoelectric transport properties of CPTO yielded the Seebeck coefficient (186 V/K), power factor (11.9 Wcm$^{-1}$K$^{-2}$), and figure of merit (ZT) value of about 0.8 at 800 K, indicating that this material could be a promising candidate for thermoelectric applications.
△ Less
Submitted 12 November, 2022;
originally announced November 2022.
-
Pandemic Vulnerability Index of US Cities: A Hybrid Knowledge-based and Data-driven Approach
Authors:
Md. Shahinoor Rahman,
Kamal Chandra Paul,
Md. Mokhlesur Rahman,
Jim Samuel,
Jean-Claude Thill,
Md. Amjad Hossain,
G. G. Md. Nawaz Ali
Abstract:
Cities become mission-critical zones during pandemics and it is vital to develop a better understanding of the factors that are associated with infection levels. The COVID-19 pandemic has impacted many cities severely; however, there is significant variance in its impact across cities. Pandemic infection levels are associated with inherent features of cities (e.g., population size, density, mobili…
▽ More
Cities become mission-critical zones during pandemics and it is vital to develop a better understanding of the factors that are associated with infection levels. The COVID-19 pandemic has impacted many cities severely; however, there is significant variance in its impact across cities. Pandemic infection levels are associated with inherent features of cities (e.g., population size, density, mobility patterns, socioeconomic condition, and health environment), which need to be better understood. Intuitively, the infection levels are expected to be higher in big urban agglomerations, but the measurable influence of a specific urban feature is unclear. The present study examines 41 variables and their potential influence on COVID-19 cases and fatalities. The study uses a multi-method approach to study the influence of variables, classified as demographic, socioeconomic, mobility and connectivity, urban form and density, and health and environment dimensions. This study develops an index dubbed the PVI-CI for classifying the pandemic vulnerability levels of cities, grou** them into five vulnerability classes, from very high to very low. Furthermore, clustering and outlier analysis provides insights on the spatial clustering of cities with high and low vulnerability scores. This study provides strategic insights into levels of influence of key variables upon the spread of infections as well as fatalities, along with an objective ranking for the vulnerability of cities. Thus it provides critical wisdom needed for urban healthcare policy and resource management. The pandemic vulnerability index calculation method and the process present a blueprint for the development of similar indices for cities in other countries, leading to a better understanding and improved pandemic management for urban areas and post-pandemic urban planning across the world.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Facile synthesis of Cu2O nanorods in the presence of NaCl by SILAR method and its characterizations
Authors:
Md. Alauddin Hossain,
Syed Farid Uddin Farhad,
Nazmul Islam Tanvir,
Jang Hyo Chang,
Mohammad Atiqur Rahman,
Tooru Tanaka,
Qixin Guo,
Jamal Uddin,
Md Abdul Majed Patwary
Abstract:
Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties of synthesized Cu2O nanorod films have been studied by a variety of characterization tools. Structural analyses by XRD confirmed the polycrystalline Cu2O phase w…
▽ More
Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties of synthesized Cu2O nanorod films have been studied by a variety of characterization tools. Structural analyses by XRD confirmed the polycrystalline Cu2O phase with (111) preferential growth. Raman scattering spectroscopic measurements conducted at room temperature also showed characteristic peaks of the pure Cu2O phase. The surface resistivity of the Cu2O nanorod films decreased from 15,142 to 685 Ohm.cm with the addition of NaCl from 0 to 4 mmol, and then exhibited an opposite trend with further addition of NaCl. The optical bandgap of the synthesized Cu2O nanorod films was observed as 1.88 - 2.36 eV, while the temperature-dependent activation energies of the Cu2O films were measured as about 0.14 - 0.21 eV. SEM morphologies demonstrated Cu2O nanorod as well as closely packed spherical grains with the alteration of NaCl concentration. The Cu2O phase of nanorods was found stable up to 230 0C corroborating the optical bandgap results of the same. The film fabricated in presence of 4 mmol of NaCl showed the lowest resistivity and activation energy as well comparatively uniform nanorod morphology. Our studies demonstrate that the nominal presence of NaCl electrolytes in the pre-cursor solutions has a significant impact on the physical properties of Cu2O nanorod films which could be beneficial in optoelectronic research.
△ Less
Submitted 22 March, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Simulating surface height and terminus position for marine outlet glaciers using a level set method with data assimilation
Authors:
M. Alamgir Hossain,
Sam Pimentel,
John M. Stockie
Abstract:
We implement a data assimilation framework for integrating ice surface and terminus position observations into a numerical ice-flow model. The model uses the well-known shallow shelf approximation (SSA) coupled to a level set method to capture ice motion and changes in the glacier geometry. The level set method explicitly tracks the evolving ice-atmosphere and ice-ocean boundaries for a marine out…
▽ More
We implement a data assimilation framework for integrating ice surface and terminus position observations into a numerical ice-flow model. The model uses the well-known shallow shelf approximation (SSA) coupled to a level set method to capture ice motion and changes in the glacier geometry. The level set method explicitly tracks the evolving ice-atmosphere and ice-ocean boundaries for a marine outlet glacier. We use an Ensemble Transform Kalman Filter to assimilate observations of ice surface elevation and lateral ice extent by updating the level set function that describes the ice interface. Numerical experiments on an idealized marine-terminating glacier demonstrate the effectiveness of our data assimilation approach for tracking seasonal and multi-year glacier advance and retreat cycles. The model is also applied to simulate Helheim Glacier, a major tidewater-terminating glacier of the Greenland Ice Sheet that has experienced a recent history of rapid retreat. By assimilating observations from remotely-sensed surface elevation profiles we are able to more accurately track the migrating glacier terminus and glacier surface changes. These results support the use of data assimilation methodologies for obtaining more accurate predictions of short-term ice sheet dynamics.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
Synthesis and Characterizations of CH3NH3PbI3:ZnS Microrods for Optoelectronic Applications
Authors:
Mohammad Tanvir Ahmed,
Shariful Islam,
Muhammad Shahriar Bashar,
Md. Abul Hossain,
Farid Ahmed
Abstract:
Organometallic perovskite is one of the potential materials in the various optoelectronic research fields. This research work demonstrates the synthesis of CH3NH3PbI3-ZnS microrods via one-step spin coating for optoelectronic applications. Incorporation of ZnS in the perovskite material caused bandgap variation in the visible wavelength range.
Organometallic perovskite is one of the potential materials in the various optoelectronic research fields. This research work demonstrates the synthesis of CH3NH3PbI3-ZnS microrods via one-step spin coating for optoelectronic applications. Incorporation of ZnS in the perovskite material caused bandgap variation in the visible wavelength range.
△ Less
Submitted 16 February, 2022; v1 submitted 27 September, 2021;
originally announced September 2021.
-
Assessment of a symmetry preserving JFNK method for atmospheric convection
Authors:
M. Alamgir Hossain,
Jahrul M Alam
Abstract:
Numerical simulations of nonhydrostatic atmospheric flow, based on linearly decoupled semi-implicit or fully-implicit techniques, usually solve linear systems by a pre-conditioned Krylov method without preserving the skew-symmetry of convective operators. We propose to perform atmospheric simulations in such a fully-implicit manner that the difference operators preserve both the skew-symmetry and…
▽ More
Numerical simulations of nonhydrostatic atmospheric flow, based on linearly decoupled semi-implicit or fully-implicit techniques, usually solve linear systems by a pre-conditioned Krylov method without preserving the skew-symmetry of convective operators. We propose to perform atmospheric simulations in such a fully-implicit manner that the difference operators preserve both the skew-symmetry and the tightly nonlinear coupling of the differential operators. We demonstrate that a symmetry-preserving Jacobian-free Newton-Krylov~(JFNK) method mimics a balance between convective transport and turbulence dissipation. We present a wavelet method as an effective symmetry preserving discretization technique. The symmetry-preserving JFNK method for solving equations of nonhydrostatic atmospheric flows has been examined using two benchmark simulations of penetrative convection -- a) dry thermals rising in a neutrally stratified and stably stratified environment, and b) urban heat island circulations for effects of the surface heat flux $H_0$ varying in the range of $25 \le H_0 \le 930$Wm$^{-2}$.The results show that an eddy viscosity model provides the necessary dissipation of the subgrid-scale modes, while the symmetry-preserving JFNK method provides the conservation of mass and energy at a satisfactory level. Comparisons of the results from a laboratory experiment of heat island circulation and a field measurement of potential temperature also suggest the modelling accuracy of the present symmetry-preserving JFNK framework.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
An open-access clicker question bank for numerical analysis
Authors:
M. Alamgir Hossain,
Petra M. Menz,
John M. Stockie
Abstract:
We present a question bank consisting of over 250 multiple-choice and true-false questions covering a broad range of material typically taught in an introductory undergraduate course in numerical analysis or scientific computing. The questions are ideal for polling students during lectures by means of a student response system that uses clicker remotes or smartphones running a suitable app. We des…
▽ More
We present a question bank consisting of over 250 multiple-choice and true-false questions covering a broad range of material typically taught in an introductory undergraduate course in numerical analysis or scientific computing. The questions are ideal for polling students during lectures by means of a student response system that uses clicker remotes or smartphones running a suitable app. We describe our experiences implementing these clicker questions in a recent class and provide evidence of their effectiveness in terms of testing students' prior knowledge, gauging understanding of new material, increasing participation, and especially improving student satisfaction. Our conclusions are supported by a mid-semester student survey as well as anecdotal observations. The question bank has been released as an open-access educational resource under a Creative Commons license (BY-NC-SA) for free use by the mathematics community.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
Time-Resolved and Temperature Tuneable Measurements of Fluorescent Intensity using a Smartphone Fluorimeter
Authors:
Md Arafat Hossain,
John Canning,
Zhikang Yu,
Sandra Ast,
Peter J. Rutledge,
Joseph K. H. Wong,
Abbas Jamalipour,
Maxwell J. Crossley
Abstract:
A smartphone fluorimeter capable of time-based fluorescence intensity measurements at various temperatures is reported. Excitation is provided by an integrated UV LED (370 nm) and detection obtained using the in-built CMOS camera. A Peltier is integrated to allow measurements of the intensity over T = 10 to 40 C with a maximum temperature resolution of DELTA T ~ 0.1 C. All components are controlle…
▽ More
A smartphone fluorimeter capable of time-based fluorescence intensity measurements at various temperatures is reported. Excitation is provided by an integrated UV LED (370 nm) and detection obtained using the in-built CMOS camera. A Peltier is integrated to allow measurements of the intensity over T = 10 to 40 C with a maximum temperature resolution of DELTA T ~ 0.1 C. All components are controlled using a smartphone battery powered Arduino microcontroller and a customised Android application that allows sequential fluorescence imaging and quantification every DELTA t = 4 seconds. The temperature dependence of fluorescence intensity for four emitters (Rhodamine B, Rhodamine 6G, 5,10,15,20-tetraphenylporphyrin and 6-(1,4,8,11-tetraazacyclotetradecane)2-ethyl-naphthalimide) are characterised. The normalised fluorescence intensity over time of the latter chemosensor dye complex in the presence of Zn ion is observed to accelerate with an increasing rate constant, k = 1.94 min-1 at T = 15 C and k = 3.64 min-1 at T = 30 C, approaching a factor of ~ 2 with only a change in temperature of DELTA T = 15 C. Thermally tuning these twist and bend associated rates to optimise sensor approaches and device applications is proposed.
△ Less
Submitted 28 February, 2017;
originally announced March 2017.
-
Flow Regimes of Mesoscale Circulations Forced by Inhomogeneous Surface Heating
Authors:
M. Alamgir Hossain,
Jahrul M Alam
Abstract:
Urbanization is one of the extreme process that increases uncertainty in future climate projections. Flow regimes of mesoscale circulations associated with surface heating due to urbanization have been investigated using a wavelet based computational fluid dynamics~(CFD) model. The results of our numerical model have been validated against that of a laboratory model, as well as reference numerical…
▽ More
Urbanization is one of the extreme process that increases uncertainty in future climate projections. Flow regimes of mesoscale circulations associated with surface heating due to urbanization have been investigated using a wavelet based computational fluid dynamics~(CFD) model. The results of our numerical model have been validated against that of a laboratory model, as well as reference numerical simulations. Characteristics of urban induced circulations have been studied for surface heat flux perturbation ($H_0$) between $28.93$Wm$^{-2}$ and $925.92$Wm$^{-2}$, and the results have been analyzed against available boundary layer measurements under similar physical conditions. Our primary study shows that urban/rural heat flux anomalies introduce strong oscillations in the convective boundary layer (CBL), and transfers a fraction of the turbulent kinetic energy vertically through internal waves. Such results complement previous investigators' hypothesis that temporal oscillations in urban-induced mesoscale circulations are primarily due to a downscale energy cascade. Although a further detailed study is necessary, the present numerical observations provide useful feedback for the impacts of urbanization on regional climate.
△ Less
Submitted 27 November, 2016;
originally announced November 2016.
-
Air-structured optical fibre drawn from a 3D-printed preform
Authors:
Kevin Cook,
John Canning,
Sergio Leon-Saval,
Zane Reid,
Md Arafat Hossain,
Jade-Edouard Comatti,
Yanhua Luo,
Gang-Ding Peng
Abstract:
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new miles…
▽ More
A structured optical fibre is drawn from a 3D-printed structured preform. Preforms containing a single ring of holes around the core are fabricated using filament made from a modified butadiene polymer. More broadly, 3D printers capable of processing soft glasses, silica and other materials are likely to come on line in the not-so distant future. 3D printing of optical preforms signals a new milestone in optical fibre manufacture.
△ Less
Submitted 31 August, 2016;
originally announced September 2016.
-
Step-index optical fibre drawn from 3D printed preforms
Authors:
Kevin CooK,
Geoffrey Balle,
John Canning,
Loic Chartier,
Tristan Athanaze,
Md Arafat Hossain,
Chunyang Han,
Jade-Edouard Comatti,
Yanhua Luo,
Gang-Ding Peng
Abstract:
Optical fibre is drawn from a dual-head 3D printer fabricated preform made of two optically transparent plastics with a high index core (NA ~ 0.25, V > 60). The asymmetry observed in the fibre arises from asymmetry in the 3D printing process. The highly multi-mode optical fibre has losses measured by cut-back as low as α ~ 0.44 dB/cm in the near IR.
Optical fibre is drawn from a dual-head 3D printer fabricated preform made of two optically transparent plastics with a high index core (NA ~ 0.25, V > 60). The asymmetry observed in the fibre arises from asymmetry in the 3D printing process. The highly multi-mode optical fibre has losses measured by cut-back as low as α ~ 0.44 dB/cm in the near IR.
△ Less
Submitted 31 August, 2016;
originally announced September 2016.
-
Penetrative turbulence associated with mesoscale surface heat flux variations
Authors:
Jahrul M. Alam,
M. Alamgir Hossain
Abstract:
This article investigates penetrative turbulence in the atmospheric boundary layer. Using a large eddy simulation approach, we study characteristics of the mixed layer with respect to surface heat flux variations in the range from 231.48 W/m$^2$ to 925.92 W/m$^2$, and observe that the surface heterogeneity on a spatial scale of $20$ km leads to downscale turbulent kinetic energy cascade. Coherent…
▽ More
This article investigates penetrative turbulence in the atmospheric boundary layer. Using a large eddy simulation approach, we study characteristics of the mixed layer with respect to surface heat flux variations in the range from 231.48 W/m$^2$ to 925.92 W/m$^2$, and observe that the surface heterogeneity on a spatial scale of $20$ km leads to downscale turbulent kinetic energy cascade. Coherent fluctuations of mesoscale horizontal wind is observed at 100m above the ground. Such a surface induced temporal oscillations in the horizontal wind suggest a rapid jump in mesocale wind forecasts, which is difficult to parameterize using traditional one-dimensional ensemble-mean models. Although the present work is idealized at a typical scale (20km) of surface heterogeneity, the results help develop effective subgrid scale parameterization schemes for classical weather forecasting mesoscale models.
△ Less
Submitted 3 May, 2015;
originally announced May 2015.
-
Spectroscopic, Structural, and Theoretical Studies of Halide Complexes with a Urea-based Tripodal Receptor
Authors:
Avijit Pramanik,
Douglas R. Powell,
Bryan M. Wong,
Md. Alamgir Hossain
Abstract:
A urea-based tripodal receptor L substituted with p-cyanophenyl groups has been studied for halide anions by $^1$H NMR spectroscopy, density functional theory (DFT) calculations and X-ray crystallography. The $^1$H NMR titration studies suggest that the receptor forms a 1:1 complex with an anion, showing the binding trend in the order of fluoride > chloride > bromide > iodide. The interaction of f…
▽ More
A urea-based tripodal receptor L substituted with p-cyanophenyl groups has been studied for halide anions by $^1$H NMR spectroscopy, density functional theory (DFT) calculations and X-ray crystallography. The $^1$H NMR titration studies suggest that the receptor forms a 1:1 complex with an anion, showing the binding trend in the order of fluoride > chloride > bromide > iodide. The interaction of fluoride anion with the receptor was further confirmed by 2D NOESY and $^{19}$F NMR spectroscopy in DMSO-d$_6$. DFT calculations indicate that the internal halide anion is held by six NH...X interactions with L, showing the highest binding energy for the fluoride complex. Structural characterization of the chloride, bromide, and silicon hexafluoride complexes of $[LH^+]$ reveals that the anion is externally located via hydrogen bonding interactions. For the bromide or chloride complex, two anions are bridged with two receptors to form a centrosymmetric dimer, while for the silicon hexafluoride complex, the anion is located within a cage formed by six ligands and two water molecules.
△ Less
Submitted 21 December, 2013;
originally announced December 2013.
-
A Self-assembled Fluoride-Water Cyclic Cluster of $[F(H_2O)]_4^{4-}$ in a Molecular Box
Authors:
Md. Alamgir Hossain,
Musabbir A. Saeed,
Avijit Pramanik,
Bryan M. Wong,
Syed A. Haque,
Douglas R. Powell
Abstract:
We present an unprecedented fluoride-water cyclic cluster of $[F(H_2O)]_4^{4-}$ assembled in a cuboid-shaped molecular box formed by two large macrocycles. Structural characterization reveals that the $[F(H_2O)]_4^{4-}$ is assembled by strong H-bonding interactions (OH...F = 2.684(3) to 2.724(3) Å), where a fluoride anion plays the topological role of a water molecule in the classical cyclic water…
▽ More
We present an unprecedented fluoride-water cyclic cluster of $[F(H_2O)]_4^{4-}$ assembled in a cuboid-shaped molecular box formed by two large macrocycles. Structural characterization reveals that the $[F(H_2O)]_4^{4-}$ is assembled by strong H-bonding interactions (OH...F = 2.684(3) to 2.724(3) Å), where a fluoride anion plays the topological role of a water molecule in the classical cyclic water octamer. The interaction of fluoride was further confirmed by $^{19}$F NMR and $^1$H NMR spectroscopies, indicating the encapsulation of the anionic species within the cavity in solution. High level DFT calculations and Bader topological analyses fully support the crystallographic results, demonstrating that the bonding arrangement in the fluoride-water cluster arises from the unique geometry of the host.
△ Less
Submitted 21 December, 2013;
originally announced December 2013.
