Showing 1–50 of 71 results for author: Hossain, M

Hydrodynamic instability of shear imposed falling film over a uniformly heated inclined undulated substrate

Authors: Md. Mouzakkir Hossain, Sukhendu Ghosh, Harekrushna Behera, G. P. Raja Sekhar

Abstract: Linear and weakly nonlinear stability analyses of an externally shear-imposed, gravity-driven falling film over a uniformly heated wavy substrate are studied. The longwave asymptotic expansion technique is utilized to formulate a single nonlinear free surface deflection equation. The linear stability criteria for the onset of instability are derived using the normal mode form in the linearized por… ▽ More Linear and weakly nonlinear stability analyses of an externally shear-imposed, gravity-driven falling film over a uniformly heated wavy substrate are studied. The longwave asymptotic expansion technique is utilized to formulate a single nonlinear free surface deflection equation. The linear stability criteria for the onset of instability are derived using the normal mode form in the linearized portion of the surface deformation equation. Linear stability theory reveals that the flow-directed sturdy external shear grows the surface wave instability by increasing the net driving force. On the contrary, the upstream-directed imposed shear may reduce the surface mode instability by restricting the gravity-driving force, which has the consequence of weakening the bulk velocity of the liquid film. However, the surface mode can be stabilized/destabilized by increasing the temperature-dependent density/surface-tension variation. Further, the bottom steepness shows dual behaviour on the surface instability depending upon the wavy wall's portion (uphill/downhill). At the downhill portion, the surface wave becomes more unstable than at the bottom substrate's uphill portion. Moreover, the multi-scale method is incorporated to obtain the complex Ginzburg-Landau equation in order to study the weakly nonlinear stability, confirming the existence of various flow regions of the liquid film. At any bottom portion (uphill/downhill), the flow-directed external shear expands the super-critical stable zones, which causes an amplification in the nonlinear wave amplitude, and the backflow-directed shear plays a counterproductive role. On the other hand, the super-critical stable region decreases or increases as long as the linear variation of density or surface tension increases with respect to the temperature, whereas the sub-critical unstable region exhibits an inverse trend. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Comments: 29 pages, 46 figures, and 5 tables

Progress in multijunction solar cells

Authors: Abu Kowsar, Sumon Chandra Debnath, Md. Shafayet-Ul-Islam, Mohammad Jobayer Hossain, Mainul Hossain, AFM Kamal Chowdhury, Galib Hashmi, Syed Farid Uddin Farhad

Abstract: The advanced multijunction solar cell (MJSC) has emerged as a frontrunner with higher efficiency in photovoltaic literature. It started its journey with a modest 20% efficient tandem solar cell, and today, it has reached an impressive 47.1% photoconversion efficiency (PCE) with six junction combinations. Since the early 1990s, these solar cells have been utilised for space applications. Recently,… ▽ More The advanced multijunction solar cell (MJSC) has emerged as a frontrunner with higher efficiency in photovoltaic literature. It started its journey with a modest 20% efficient tandem solar cell, and today, it has reached an impressive 47.1% photoconversion efficiency (PCE) with six junction combinations. Since the early 1990s, these solar cells have been utilised for space applications. Recently, there has been a trend of using this genre for terrestrial applications as well. However, the complexity and high cost of the fabrication procedure have been the significant challenges over the last three decades. The photovoltaic (PV) community has witnessed a variety of fabrication approaches to address these hurdles. This paper reviews the progression of computational and experimental research approaches of III-V MJSCs and their fabrication processes. In addition, it addresses the barriers hindering the progress of these cells and their prospects. This review gathers insights from a handful number of articles on III-V MJSCs to provide a comprehensive guide for the new entrants, experts and practitioners about the research methodologies, growth techniques, current status, challenges, and opportunities in a timely and conscious manner. △ Less

Submitted 28 February, 2024; originally announced May 2024.

Comments: 17 pages, 4 figures

Design and optimization of CdSe-CuSbSe2-based double-junction two-terminal tandem solar cells with VOC> 2.0 V and PCE over 42%

Authors: Sheikh Noman Shiddique, Ahnaf Tahmid Abir, Md Jayed Hossain, Mainul Hossain, Jaker Hossain

Abstract: In this article, we demonstrate CdSe-CuSbSe2-based double junction two-terminal tandem solar cells simulated with SCAPS-1D. The highest performance of the tandem cell has been confirmed by optimizing the electrical and optical properties of window, top absorber, CdSe (bandgap 1.7 eV), bottom absorber, CuSbSe2 (bandgap 1.08 eV) and back surface layers. In addition, the effect of different parameter… ▽ More In this article, we demonstrate CdSe-CuSbSe2-based double junction two-terminal tandem solar cells simulated with SCAPS-1D. The highest performance of the tandem cell has been confirmed by optimizing the electrical and optical properties of window, top absorber, CdSe (bandgap 1.7 eV), bottom absorber, CuSbSe2 (bandgap 1.08 eV) and back surface layers. In addition, the effect of different parameters such as thickness, do**, defect density of different layers has been investigated in details. With the optimized condition, the modeled CdSe-CuSbSe2 double-junction two-terminal tandem solar cell displays the noticeable efficiency of 42.64% with open circuit voltage of 2.09 V, short circuit current density of 24.09 mA/cm2 and fill factor of 84.36%, respectively. These results are highly propitious for the construction of all-chalcogenide based high performance tandem photovoltaic cells in the future. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Comments: 26 pages, 9 Figures, 1 Table

Discovery of a Topological Charge Density Wave

Authors: Maksim Litskevich, Md Shafayat Hossain, Songbo Zhang, Zi-Jia Cheng, Satya N. Guin, Nitesh Kumar, Chandra Shekhar, Zhiwei Wang, Yongkai Li, Guoqing Chang, Jia-Xin Yin, Qi Zhang, Guangming Cheng, Yu-Xiao Jiang, Tyler A. Cochran, Nana Shumiya, Xian P. Yang, Daniel Multer, Xiaoxiong Liu, Nan Yao, Yugui Yao, Claudia Felser, Titus Neupert, M. Zahid Hasan

Abstract: Charge density waves (CDWs) appear in numerous condensed matter platforms, ranging from high-Tc superconductors to quantum Hall systems. Despite such ubiquity, there has been a lack of direct experimental study on boundary states that can uniquely stem from the charge order. Here, using scanning tunneling microscopy, we directly visualize the bulk and boundary phenomenology of CDW in a topological… ▽ More Charge density waves (CDWs) appear in numerous condensed matter platforms, ranging from high-Tc superconductors to quantum Hall systems. Despite such ubiquity, there has been a lack of direct experimental study on boundary states that can uniquely stem from the charge order. Here, using scanning tunneling microscopy, we directly visualize the bulk and boundary phenomenology of CDW in a topological material, Ta2Se8I. Below the transition temperature (TCDW = 260 K), tunneling spectra on an atomically resolved lattice reveal a large insulating gap in the bulk and on the surface, exceeding 500 meV, surpassing predictions from standard weakly-coupled mean-field theory. Spectroscopic imaging confirms the presence of CDW, with LDOS maxima at the conduction band corresponding to the LDOS minima at the valence band, thus revealing a π phase difference in the respective CDW order. Concomitantly, at a monolayer step edge, we detect an in-gap boundary mode with modulations along the edge that match the CDW wavevector along the edge. Intriguingly, the phase of the edge state modulation shifts by π within the charge order gap, connecting the fully gapped bulk (and surface) conduction and valence bands via a smooth energy-phase relation. This bears similarity to the topological spectral flow of edge modes, where the boundary modes bridge the gapped bulk modes in energy and momentum magnitude but in Ta2Se8I, the connectivity distinctly occurs in energy and momentum phase. Notably, our temperature-dependent measurements indicate a vanishing of the insulating gap and the in-gap edge state above TCDW, suggesting their direct relation to CDW. The theoretical analysis also indicates that the observed boundary mode is topological and linked to CDW. △ Less

Submitted 25 January, 2024; originally announced January 2024.

Comments: Nature Physics (2024); in press

An Ultra-Sensitive Visible-IR Range Fiber Based Plasmonic Refractive Index Sensor

Authors: Mohammad Al Mahfuz, Sumaiya Afroj, Md. Azad Hossain, Md. Anwar Hossain, Afiquer Rahman, Md Selim Habib

Abstract: Photonic crystal fiber (PCF)-based plasmonic sensors have gained considerable attention because of their highly sensitive performance and broad range of sensing regimes. In this work, a relatively simple ultra-sensitive PCF-based surface plasmon resonance (SPR) sensor has been proposed for detecting different analyte refractive indices (RIs) ranging from 1.33 to 1.43 over a wide range of wavelengt… ▽ More Photonic crystal fiber (PCF)-based plasmonic sensors have gained considerable attention because of their highly sensitive performance and broad range of sensing regimes. In this work, a relatively simple ultra-sensitive PCF-based surface plasmon resonance (SPR) sensor has been proposed for detecting different analyte refractive indices (RIs) ranging from 1.33 to 1.43 over a wide range of wavelength spectrum spanning 0.55 $μ$m to 3.50 $μ$m. The comprehensive finite-element simulations indicate that it is possible to achieve remarkable sensing performances such as wavelength sensitivity (WS) and figure of merit (FOM) as high as 123,000 nm/RIU and 683 RIU$^{-1}$, respectively, and extremely low values of wavelength resolution (WR) of 8.13 x 10$^{-8}$ RIU. In addition, a novel artificial neural network (ANN) model is proposed to be integrated into the practical setup in order to accurately predict the RIs by carefully examining the simulation data. The mean square error (MSE) and accuracy ($R^2$) values for the ANN model are found about 0.0097 and 0.9987, respectively, indicating the high prediction capability of the proposed ANN model. Due to its exceptional sensitivity and precise detection capabilities, the proposed device has the potential to serve as a viable option for sensing analyte refractive index (RI). Additionally, the sensor could be utilized for identifying cancerous cells and detecting urinary tract infections in humans. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Discovery of a hybrid topological quantum state in an elemental solid

Authors: Md Shafayat Hossain, Frank Schindler, Rajibul Islam, Zahir Muhammad, Yu-Xiao Jiang, Zi-Jia Cheng, Qi Zhang, Tao Hou, Hongyu Chen, Maksim Litskevich, Brian Casas, Jia-Xin Yin, Tyler A. Cochran, Mohammad Yahyavi, Xian P. Yang, Luis Balicas, Guoqing Chang, Weisheng Zhao, Titus Neupert, M. Zahid Hasan

Abstract: Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three significant research directions: competition between distinct interactions, as in the multiple intertwined phases, interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and the coalescence of multiple topol… ▽ More Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three significant research directions: competition between distinct interactions, as in the multiple intertwined phases, interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and the coalescence of multiple topological orders to generate distinct novel phases. The first two examples have grown into major areas of research, while the last example remains mostly untouched, mainly because of the lack of a material platform for experimental studies. Here, using tunneling microscopy, photoemission spectroscopy, and theoretical analysis, we unveil a "hybrid" and yet novel topological phase of matter in the simple elemental solid arsenic. Through a unique bulk-surface-edge correspondence, we uncover that arsenic features a conjoined strong and higher-order topology, stabilizing a hybrid topological phase. While momentum-space spectroscopy measurements show signs of topological surface states, real-space microscopy measurements unravel a unique geometry of topology-induced step edge conduction channels revealed on various forms of natural nanostructures on the surface. Using theoretical models, we show that the existence of gapless step edge states in arsenic relies on the simultaneous presence of both a nontrivial strong Z2 invariant and a nontrivial higher-order topological invariant, providing experimental evidence for hybrid topology and its realization in a single crystal. Our discovery highlights pathways to explore the interplay of different kinds of band topology and harness the associated topological conduction channels in future engineered quantum or nano-devices. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Comments: Nature (2024); in press

Transport response of topological hinge modes in $α$-Bi$_4$Br$_4$

Authors: Md Shafayat Hossain, Qi Zhang, Zhiwei Wang, Nikhil Dhale, Wenhao Liu, Maksim Litskevich, Brian Casas, Nana Shumiya, Jia-Xin Yin, Tyler A. Cochran, Yongkai Li, Yu-Xiao Jiang, Ying Yang, Guangming Cheng, Zi-Jia Cheng, Xian P. Yang, Nan Yao, Titus Neupert, Luis Balicas, Yugui Yao, Bing Lv, M. Zahid Hasan

Abstract: Electronic topological phases are renowned for their unique properties, where conducting surface states exist on the boundary of an insulating three-dimensional bulk. While the transport response of the surface states has been extensively studied, the response of the topological hinge modes remains elusive. Here, we investigate a layered topological insulator $α$-Bi$_4$Br$_4$, and provide the firs… ▽ More Electronic topological phases are renowned for their unique properties, where conducting surface states exist on the boundary of an insulating three-dimensional bulk. While the transport response of the surface states has been extensively studied, the response of the topological hinge modes remains elusive. Here, we investigate a layered topological insulator $α$-Bi$_4$Br$_4$, and provide the first evidence for quantum transport in gapless topological hinge states existing within the insulating bulk and surface energy gaps. Our magnetoresistance measurements reveal pronounced h/e periodic (where h denotes Planck's constant and e represents the electron charge) Aharonov-Bohm oscillation. The observed periodicity, which directly reflects the enclosed area of phase-coherent electron propagation, matches the area enclosed by the sample hinges, providing compelling evidence for the quantum interference of electrons circumnavigating around the hinges. Notably, the h/e oscillations evolve as a function of magnetic field orientation, following the interference paths along the hinge modes that are allowed by topology and symmetry, and in agreement with the locations of the hinge modes according to our scanning tunneling microscopy images. Remarkably, this demonstration of quantum transport in a topological insulator can be achieved using a flake geometry and we show that it remains robust even at elevated temperatures. Our findings collectively reveal the quantum transport response of topological hinge modes with both topological nature and quantum coherence, which can be directly applied to the development of efficient quantum electronic devices. △ Less

Submitted 14 February, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Comments: Nature Physics, in press (2023)

Fiber-based Ratiometric Optical Thermometry with Silicon-Vacancy in Microdiamonds

Authors: Md Shakhawath Hossain, Miguel Bacaoco, Thi Ngoc Anh Mai, Guillaume Ponchon, Chaohao Chen, Lei Ding, Yongliang Chen, Evgeny Ekimov, Helen Xu, Alexander S. Solntsev, Toan Trong Tran

Abstract: Fiber optic all-optical thermometry is a promising technology to track temperature at a micro-scale while designing efficient and reliable microelectronic devices and components. In this work, we demonstrate a novel real-time ratiometric fiber optic thermometry technique based on silicon-vacancy (SiV) diamond that shows the highest temperature resolution (22.91 KHz^(-1/2) Wcm^(-2)) and spatial res… ▽ More Fiber optic all-optical thermometry is a promising technology to track temperature at a micro-scale while designing efficient and reliable microelectronic devices and components. In this work, we demonstrate a novel real-time ratiometric fiber optic thermometry technique based on silicon-vacancy (SiV) diamond that shows the highest temperature resolution (22.91 KHz^(-1/2) Wcm^(-2)) and spatial resolution (~7.5 um) among all-optical fiber-based thermosensors reported to date. Instead of analyzing the spectral features of temperature-dependent SiV signal, coming from SiV micro-diamond fixed on the fiber tip, an alternative parallel detection method based on filtering optics and photon counters is proposed to read out the sample temperature in real-time. The signal collection efficiency of the fiber is also investigated numerically with semi-analytic ray-optical analysis and then compared with our experimental study. We finally demonstrate the performance of the thermosensor by monitoring the temperature at distinct locations in a lab-built graphite-based microheater device. Our work introduces a reconfigurable method for temperature monitoring in microelectronic, microfluidic devices, or biological environments and unlocks a new direction for fiber-based all-optical thermometry research. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Cryogenic Thermal Shock Effects on Optical Properties of Quantum Emitters in Hexagonal Boron Nitride

Authors: Thi Ngoc Anh Mai, Sajid Ali, Md Shakhawath Hossain, Chaohao Chen, Lei Ding, Yongliang Chen, Alexander S. Solntsev, Hongwei Mou, Xiaoxue Xu, Nikhil Medhekar, Toan Trong Tran

Abstract: Solid-state quantum emitters are vital building blocks for quantum information science and quantum technology. Among various types of solid-state emitters discovered to date, color centers in hexagonal boron nitride have garnered tremendous traction in recent years thanks to their environmental robustness, high brightness and room-temperature operation. Most recently, these quantum emitters have b… ▽ More Solid-state quantum emitters are vital building blocks for quantum information science and quantum technology. Among various types of solid-state emitters discovered to date, color centers in hexagonal boron nitride have garnered tremendous traction in recent years thanks to their environmental robustness, high brightness and room-temperature operation. Most recently, these quantum emitters have been employed for satellite-based quantum key distribution. One of the most important requirements to qualify these emitters for space-based applications is their optical stability against cryogenic thermal shock. Such understanding has, however, remained elusive to date. Here, we report on the effects caused by such thermal shock which induces random, irreversible changes in the spectral characteristics of the quantum emitters. By employing a combination of structural characterizations and density functional calculations, we attribute the observed changes to lattice strains caused by the cryogenic temperature shock. Our study shed light on the stability of the quantum emitters under extreme conditions, similar to those countered in outer space. △ Less

Submitted 28 November, 2023; originally announced November 2023.

Photon Management in Silicon Photovoltaic Cells: A Critical Review

Authors: Mohammad Jobayer Hossain, Mengdi Sun, Kristopher O. Davis

Abstract: With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical limit, pushing conversion efficiencies even higher now relies on reducing every type of power loss that can occur within the device. Limiting optical losses is therefore critical and requires effective management of incident photons in terms of how they interact with the device. Ultimately, photon manag… ▽ More With the practical efficiency of the silicon photovoltaic (PV) cell approaching its theoretical limit, pushing conversion efficiencies even higher now relies on reducing every type of power loss that can occur within the device. Limiting optical losses is therefore critical and requires effective management of incident photons in terms of how they interact with the device. Ultimately, photon management within a PV cell means engineering the device and constituent materials to maximize photon absorption within the active semiconductor and therefore reduce the number of photons lost through other means, most notably reflection and parasitic absorption. There have been great advancements in the front and the rear side photon management techniques in recent years. This review aims to discuss these advancements and compare the various approaches, not only in terms of increases in photogenerated current, but also their compatibility with different PV cell architectures and potential trade-offs, like increased surface recombination or scalability for high-volume manufacturing. In this review, a comprehensive discussion of a wide variety of the front and the rear side photon management structures are presented with suggestions to improve the already achieved performance further. This review is unique because it not only presents the recent development in photon management techniques, but also offer through analysis of these techniques and pathways to improve further. △ Less

Submitted 17 February, 2024; v1 submitted 4 August, 2023; originally announced August 2023.

Comments: 4 figures, 1 table

Journal ref: Solar Energy Materials and Solar Cells, Volume 267, April 2024, 112715

Highly efficient CdTe solar cell with a thin CIT current booster: theoretical insights

Authors: Md. Sabbir Hossain, Md. Alamin Hossain pappu, Bipanko Kumar Mondal, Ahnaf Tahmid Abir, Jaker Hossain

Abstract: CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed that physical parameters such as thickness, do**, and defects of the CIT layer have a significant influence on the performance of the CdTe solar cell. The devic… ▽ More CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed that physical parameters such as thickness, do**, and defects of the CIT layer have a significant influence on the performance of the CdTe solar cell. The device shows an efficiency of 37.46% with an open circuit voltage, VOC of 1.102 V, short circuit current density, JSC of 38.50 mA/cm2, and fill factor, FF of 88.30%. The use of the photon recycling technique with a Bragg-reflector with 98% back and 95% front reflectance only provides an efficiency of ~44.3% with a current of 45.4 mA/cm2. These findings are very hopeful for the production of an efficient CdTe solar cells in the near future. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Comments: 26 pages, 9 figures, 1 Table

Fabrication and Characterization of Graphene-Barium Titanate-Graphene layered capacitors by spin coating at low processing temperatures

Authors: M. S. Habib, S. F. U. Farhad, N. I. Tanvir, M. S. Alam, M. N. A. Bitu, M. S. Islam, S. Islam, N. Khatun, M. S Hossain

Abstract: Barium titanate, BaTiO3 (BT), materials have been synthesized by two different routes: one ball-mill-derived (BMD) nanopowder and another precursor-derived (PCD) BT synthesis method were used separately to fabricate BT thin films on stainless steel (SS) and quartz substrates by spin coating. Then thin films from both synthesis routes were characterized by Ultraviolet-Visible-Near Infrared (UV-Vis-… ▽ More Barium titanate, BaTiO3 (BT), materials have been synthesized by two different routes: one ball-mill-derived (BMD) nanopowder and another precursor-derived (PCD) BT synthesis method were used separately to fabricate BT thin films on stainless steel (SS) and quartz substrates by spin coating. Then thin films from both synthesis routes were characterized by Ultraviolet-Visible-Near Infrared (UV-Vis-NIR) Spectroscopy, Field-Emission Scanning Electron Microscopy (FE-SEM), X-ray Diffractometry (XRD), Raman Spectroscopy, and Four-point collinear probe; all carried out at room temperature. Our studies revealed that the PCD synthesis process did not produce the BT phase even under the 900^0C air-annealing condition. In contrast, a homogeneous BT thin film has been formed from the BMD-BT nanopowder. The optical band gap of BMD-BT thin films was found in the 3.10 - 3.28 eV range. Finally, a Graphene-Barium Titanate-Graphene (G-BT-G) structure was fabricated on a SS substrate by spin coating at processing temperatures below 100^0C and characterized by two different pieces of equipment: a Potentiostat/Galvanostat (PG-STAT) and a Precision Impedance Analyzer (PIA). The G-BT-G structure exhibited a capacitance of 8 nF and 7.15 nF, a highest dielectric constant of 800 and 790, and a low dielectric loss of 4.5 and 5, investigated by PG-STAT and PIA equipment, respectively. △ Less

Submitted 17 June, 2023; originally announced June 2023.

Comments: 25 pages, 11 Figures

Impact of a floating flexible plate on the stability of double-layered falling flow

Authors: Md. Mouzakkir Hossain, Sukhendu Ghosh, Harekrushna Behera

Abstract: The hydrodynamic stability behaviour of a two-layer falling film is explored with a floating flexible plate on the top surface. The stress balance at the surface is modeled using a modified membrane equation. There is an insoluble surfactant at the liquid-liquid interface of the flow system. The linear instability of perturbation waves is captured by numerically solving the generalized Orr-Sommerf… ▽ More The hydrodynamic stability behaviour of a two-layer falling film is explored with a floating flexible plate on the top surface. The stress balance at the surface is modeled using a modified membrane equation. There is an insoluble surfactant at the liquid-liquid interface of the flow system. The linear instability of perturbation waves is captured by numerically solving the generalized Orr-Sommerfeld eigenvalue problem using Chebyshev spectral collocation technique. Four different types of linear stability modes are identified: namely surface mode (SM), interface mode (IM), interface surfactant mode (ISM), and shear mode (SHM). The floating flexible plate has an inferior impact on all the existing modes in the longwave zone. However, a significant influence is noticed for the finite wave numbers. The surface and interface wave instabilities can be suppressed in the smaller wavenumber zone by imposing higher structural rigidity and uniform thickness of the flexible plate. The stabilizing nature of the surface mode becomes more powerful when the top layer viscosity is dominant. A new interfacial instability emerges when the top layer is less viscous than the lower one. At moderate Reynolds numbers, the behaviour of interface mode is different in two different zones $mr<1$ and $mr>1$, where $m$ and $r$ denote the viscosity and density ratio, respectively. Further, the unstable shear modes induced by the top and bottom layers are detected under the low inclination angles with a strong inertia force. The occurrence of the shear modes demands the bottom layer's viscosity and density to be very high than that of the upper layer. The influence of characteristic parameters of the flexible plate on the lower layer shear mode is not very sensitive. Finally, the competition between the different modes for dominance of stability boundaries is also discussed. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: 22 pages, 48 figures

Odd-viscosity induced surfactant-laden shear-imposed viscous film over a slippery incline

Authors: Md. Mouzakkir Hossain, Sukhendu Ghosh, Harekrushna Behera

Abstract: This research focuses on the stability analysis of an odd viscosity-induced shear-imposed Newtonian fluid flowing down an inclined slippery bed having an insoluble surfactant at the top of the liquid surface. The Orr-Sommerfeld boundary value problem is developed by applying the normal mode approach to the infinitesimal perturbed fluid flow and solved using the numerical method Chebyshev spectral… ▽ More This research focuses on the stability analysis of an odd viscosity-induced shear-imposed Newtonian fluid flowing down an inclined slippery bed having an insoluble surfactant at the top of the liquid surface. The Orr-Sommerfeld boundary value problem is developed by applying the normal mode approach to the infinitesimal perturbed fluid flow and solved using the numerical method Chebyshev spectral collocation. The numerical results confirm the existence of Yih mode and Marangoni mode in the longwave zone. For the clean/contaminated surface of the film flow, the presence of an odd or Hall viscosity coefficient reduces the surface wave energy and delays the transition from laminar to perturbed flow. Also, it has stabilizing nature on the unstable Marangoni mode as well. The growth rate of both clean and contaminated liquid surfaces becomes more/less when the stronger external shear acts along the downstream/upstream direction of fluid flow. Further, the slip parameter leads to a lower critical Reynolds number and makes the liquid surface more unstable. An increase in the critical Reynolds number due to the stronger Marangoni force ensures that the insoluble surfactant has the potential to dampen the Yih mode instability. Moreover, the unstable shear mode occurs in the finite wavenumber regime with very high inertial force and a small angle of inclination. The two-fold variation of the shear mode instability is possible with respect to the imposed shear. However, the inclusion of the odd viscosity coefficient in the viscous falling film may advance the shear mode instability. △ Less

Submitted 4 May, 2023; originally announced May 2023.

Comments: 19 pages, 48 figures

Development of an eReaxFF Force Field for BZY20 Solid Oxide Electrocatalysis

Authors: Md Jamil Hossain, Prashik Gaikwad, Yun Kyung Shin, Jessica Schulze, Kate Penrod, Meng Li, Yuxiao Lin, Gorakh Pawar, Adri C. T. van Duin

Abstract: Electrocatalysis is a catalytic process where the rate of an electrochemical reaction occurring at the electrode-electrolyte interface can be controlled by varying the electrical potential. Electrocatalysis can be applied to generate hydrogen which can be stored for future use in fuel cells for clean electricity. The use of solid oxide in electrocatalysis specially in hydrogen evolution reaction i… ▽ More Electrocatalysis is a catalytic process where the rate of an electrochemical reaction occurring at the electrode-electrolyte interface can be controlled by varying the electrical potential. Electrocatalysis can be applied to generate hydrogen which can be stored for future use in fuel cells for clean electricity. The use of solid oxide in electrocatalysis specially in hydrogen evolution reaction is promising. However, further improvements are essential in order to meet the ever-increasing global energy demand. Improvement of the performance of these high energy chemical systems is directly linked to the understanding and improving the complex physical and chemical phenomena and exchanges that take place at their different interfaces. To enable large length and time scale atomistic simulations of solid oxide electrocatalysis for hydrogen generation, we developed an eReaxFF force field for barium zirconate doped with 20 mol% of yttrium (BZY20). All parameters for the eReaxFF were optimized to reproduce quantum mechanical (QM) calculations on relevant condensed phase and cluster systems describing oxygen vacancies, vacancy migrations, water adsorption, water splitting and hydrogen generation on the surfaces of the BZY20 solid oxide. Using the developed force field, we performed zero-voltage molecular dynamics simulations to observe water adsorption and the eventual hydrogen production. Based on our simulation results, we conclude that this force field sets a stage for the introduction of explicit electron concept in order to simulate electron conductivity, electron leakage and non-zero-voltage effects on hydrogen generation. Overall, we demonstrate how atomistic-scale simulations can enhance our understanding of processes at interfaces in solid oxide materials. △ Less

Submitted 24 April, 2023; originally announced April 2023.

Comments: 1 file, 20 pages, 15 figures

Journal ref: Npj Comput. Mater. 10 (2024) 136

Anisotropic plates with architected tendon network

Authors: Md Shahjahan Hossain, Hossein Ebrahimi, Ranajay Ghosh

Abstract: We synthesize geometrically tailorable anisotropic plates by combining button shaped fish-scale like features on soft substrates, then lacing them with high-stiffness strings. This creates a new type of biomimetic architectured structure with multiple broken symmetries. First, the tendons and scales together break the symmetry of the bending response between the concave and convex curvature. Next,… ▽ More We synthesize geometrically tailorable anisotropic plates by combining button shaped fish-scale like features on soft substrates, then lacing them with high-stiffness strings. This creates a new type of biomimetic architectured structure with multiple broken symmetries. First, the tendons and scales together break the symmetry of the bending response between the concave and convex curvature. Next, the weave pattern of the tendons further breaks symmetry along the two directors of plates. The anisotropy is clearly evident in 3-point bending experiments. Motivated by these experiments and the need for design, we formulate the analytical energy-based model to quantify the anisotropic elasticity and tailorable Poisson's ratio. The derived architecture-property relationships can be used to design architected tendon plates with desirable properties. △ Less

Submitted 5 April, 2023; originally announced April 2023.

Comments: Short communication, 4 figures, architecture-property correlations

Report number: Md Shahjahan Hossain, Hossein Ebrahimi, Ranajay Ghosh, Anisotropic plates with architected tendon network, Journal of the Mechanical Behavior of Biomedical Materials, 2024, 106505, ISSN 1751-6161,

Journal ref: Journal of the Mechanical Behavior of Biomedical Materials, 2024, 106505, ISSN 1751-6161,

Anomalously high supercurrent density in a two-dimensional topological material

Authors: Qi Zhang, Md Shafayat Hossain, Brian Casas, Wenkai Zheng, Zi-Jia Cheng, Zhuangchai Lai, Yi-Hsin Tu, Guoqing Chang, Yao Yao, Siyuan Li, Yu-Xiao Jiang, Sougata Mardanya, Tay-Rong Chang, **g-Yang You, Yuan-** Feng, Guangming Cheng, Jia-Xin Yin, Nana Shumiya, Tyler A. Cochran, Xian P. Yang, Maksim Litskevich, Nan Yao, Kenji Watanabe, Takashi Taniguchi, Hua Zhang , et al. (2 additional authors not shown)

Abstract: Ongoing advances in superconductors continue to revolutionize technology thanks to the increasingly versatile and robust availability of lossless supercurrent. In particular high supercurrent density can lead to more efficient and compact power transmission lines, high-field magnets, as well as high-performance nanoscale radiation detectors and superconducting spintronics. Here, we report the disc… ▽ More Ongoing advances in superconductors continue to revolutionize technology thanks to the increasingly versatile and robust availability of lossless supercurrent. In particular high supercurrent density can lead to more efficient and compact power transmission lines, high-field magnets, as well as high-performance nanoscale radiation detectors and superconducting spintronics. Here, we report the discovery of an unprecedentedly high superconducting critical current density (17 MA/cm2 at 0 T and 7 MA/cm2 at 8 T) in 1T'-WS2, exceeding those of all reported two-dimensional superconductors to date. 1T'-WS2 features a strongly anisotropic (both in- and out-of-plane) superconducting state that violates the Pauli paramagnetic limit signaling the presence of unconventional superconductivity. Spectroscopic imaging of the vortices further substantiates the anisotropic nature of the superconducting state. More intriguingly, the normal state of 1T'-WS2 carries topological properties. The band structure obtained via angle-resolved photoemission spectroscopy and first-principles calculations points to a Z2 topological invariant. The concomitance of topology and superconductivity in 1T'-WS2 establishes it as a topological superconductor candidate, which is promising for the development of quantum computing technology. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Enhancement of photocatalytic performance of V2O5 by rare-earth ions do**, synthesized by facile hydrothermal technique

Authors: M. H. Kabir, M. Z. Hossain, M. A. Jalil, M. M. Hossain, M. A. Ali, M. U. Khandaker, D. Jana, Md. M. Rahman, M. K. Hossain, M. M. Uddin

Abstract: The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of do** concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped… ▽ More The rare-earth (RE) elements [Holmium (Ho) and Ytterbium (Yb)] doped vanadium pentoxide (V2O5) with a series of do** concentrations (1 mol.%, 3 mol.%, and 5 mol.%) have been successfully synthesized using environment-friendly facile hydrothermal method. The effect of RE ions on the photocatalytic efficiency of doped V2O5 has also been analyzed. The stable orthorhombic crystal structure of doped V2O5 confirms by the X-ray diffraction with no secondary phase, and high-stressed conditions are generated for the 3 mol.%. The crystallite size, strain, and dislocation density are calculated to perceive the do** effect on the bare V2O5. The optical characteristics have been measured using UV-vis spectroscopy. The absorptions are found to be increased with increasing do** concentrations; however, the bandgap remains in the visible range. The photocatalytic properties are examined for the compounds with varying pH, and it is observed that higher efficiency is exhibited for the pH 7 and catalyst concentration 500 ppm. The highest degradation efficiency is found to be 93% and 95% for the 3 mol.% of Ho and Yb-doped V2O5 samples within 2 hours, respectively. It is elucidated that the RE ions significantly impact the catalytic behavior of V2O5, and the mechanism behind these extraordinary efficiencies has been explained thoroughly. △ Less

Submitted 16 January, 2023; originally announced January 2023.

Study on the hydrogen behavior in Y and Co doped barium-zirconate

Authors: M. Khalid Hossain, Kenichi Hashizume

Abstract: Hydrogen release behavior from mixed-perovskite oxide, yttrium and cobalt doped barium-zirconate, BaZr$_{0.955}$Y$_{0.03}$Co$_{0.015}$O$_{3-a}$ (BZYC) exposed to D$_2$ or D$_2$O atmosphere was studied by thermal desorption spectroscopy (TDS) detecting deuterium gas (D$_2$) and heavy water vapor (D$_2$O) separately. The release of hydrogen appeared at around 1000 K. Hydrogen solubility was higher i… ▽ More Hydrogen release behavior from mixed-perovskite oxide, yttrium and cobalt doped barium-zirconate, BaZr$_{0.955}$Y$_{0.03}$Co$_{0.015}$O$_{3-a}$ (BZYC) exposed to D$_2$ or D$_2$O atmosphere was studied by thermal desorption spectroscopy (TDS) detecting deuterium gas (D$_2$) and heavy water vapor (D$_2$O) separately. The release of hydrogen appeared at around 1000 K. Hydrogen solubility was higher in the BZYC sample exposed to the D$_2$O. △ Less

Submitted 26 December, 2022; originally announced January 2023.

Comments: 2 pages, 3 figures, 1 table. Conference: 21st Cross Straits Symposium on Energy and Environmental Science and TechnologyAt: Shanghai Jiao Tong University, Shanghai, China (November 24th-27th, 2019)

Combined DFT, SCAPS-1D, and wxAMPS frameworks for design optimization of efficient Cs2BiAgI6-based perovskite solar cells with different charge transport layers

Authors: M. Khalid Hossain, A. A. Arnab, Ranjit C. Das, K. M. Hossain, M. H. K. Rubel, Md. Ferdous Rahman, H. Bencherif, M. E. Emetere, Mustafa K. A. Mohammed, Rahul Pandey

Abstract: In this study, combined DFT, SCAPS-1D, and wxAMPS frameworks are used to investigate the optimized designs of Cs2BiAgI6 double perovskite-based solar cells. The first-principle calculation is employed to investigate the structural stability, optical responses, and electronic contribution of the constituent elements in Cs2BiAgI6 absorber material, where SCAPS-1D and wxAMPS simulators are used to sc… ▽ More In this study, combined DFT, SCAPS-1D, and wxAMPS frameworks are used to investigate the optimized designs of Cs2BiAgI6 double perovskite-based solar cells. The first-principle calculation is employed to investigate the structural stability, optical responses, and electronic contribution of the constituent elements in Cs2BiAgI6 absorber material, where SCAPS-1D and wxAMPS simulators are used to scrutinize different configurations of Cs2BiAgI6 solar cells. Here, PCBM, ZnO, TiO2, C60, IGZO, SnO2, WS2, and CeO2 are used as ETL, and Cu2O, CuSCN, CuSbS2, NiO, P3HT, PEDOT: PSS, Spiro-MeOTAD, CuI, CuO, V2O5, CBTS, CFTS are used as HTL, and Au is used as a back contact. About ninety-six combinations of Cs2BiAgI6-based solar cell structures are investigated, in which eight sets of solar cell structures are identified as the most efficient structures. Besides, holistic investigation on the effect of different factors such as the thickness of different layers, series and shunt resistances, temperature, capacitance, Mott-Schottky and generation-recombination rates, and J-V (current-voltage density) and QE (quantum efficiency) characteristics is performed. The results show CBTS as the best HTL for Cs2BiAgI6 with all eight ETLs used in this work, resulting in a power conversion efficiency (PCE) of 19.99%, 21.55%, 21.59%, 17.47%, 20.42%, 21.52%, 14.44%, 21.43% with PCBM, TiO2, ZnO, C60, IGZO, SnO2, CeO2, WS2, respectively. The proposed strategy may pave the way for further design optimization of lead-free double perovskite solar cells. △ Less

Submitted 26 December, 2022; originally announced December 2022.

Comments: 36 pages, 14 figures, 6 tables

Journal ref: RSC Advance 12 (2022) 35002-35025

Voltage-controlled Cryogenic Boolean Logic Family Based on Ferroelectric SQUID

Authors: Shamiul Alam, Md Shafayat Hossain, Kai Ni, Vijaykrishnan Narayanan, Ahmedullah Aziz

Abstract: The recent progress in quantum computing and space exploration led to a surge in interest in cryogenic electronics. Superconducting devices such as Josephson junction, Josephson field effect transistor, cryotron, and superconducting quantum interference device (SQUID) are traditionally used to build cryogenic logic gates. However, due to the superconducting nature, gate-voltage-based control of th… ▽ More The recent progress in quantum computing and space exploration led to a surge in interest in cryogenic electronics. Superconducting devices such as Josephson junction, Josephson field effect transistor, cryotron, and superconducting quantum interference device (SQUID) are traditionally used to build cryogenic logic gates. However, due to the superconducting nature, gate-voltage-based control of these devices is extremely difficult. Even more challenging is to cascade the logic gates because most of these devices require current bias for their operation. Therefore, these devices are not as convenient as the semiconducting transistors to design logic gates. Here, to overcome these challenges, we propose a ferroelectric SQUID (FeSQUID) based voltage-controlled logic gates. FeSQUID exhibits two different critical current levels for two different voltage-switchable polarization states of the ferroelectric. We utilize the polarization-dependent (hence, voltage-controllable) superconducting to resistive switching of FeSQUID to design Boolean logic gates such as Copy, NOT, AND, and OR gates. The operations of these gates are verified using a Verilog-A-based compact model of FeSQUID. Finally, to demonstrate the fanning out capability of FeSQUID-based logic family, we simulate a 2-input XOR gate using FeSQUID-based NOT, AND, and OR gates. Together with the ongoing progress on FeSQUID-based non-volatile memory, our designed FeSQUID-based logic family will enable all-FeSQUID based cryogenic computer, ensure minimum mismatch between logic and memory blocks in terms of speed, power consumption, and fabrication process. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Comments: 11 pages, 4 figures

Planar Metasurface Antenna with Tunable via Boundaries for Computational Imaging

Authors: Toufiq M. Hossain, Andrey E. Miroshnichenko, David A. Powell

Abstract: The fusion of metasurface antennas and computational imaging facilitates the design of microwave imaging systems which require no lenses, phase shifters or moving parts. The technique involves the generation of appropriately designed diverse measurement modes to encode the scene information into a small number of measurements. We propose a novel boundary-tunable parallel plate waveguide-based meta… ▽ More The fusion of metasurface antennas and computational imaging facilitates the design of microwave imaging systems which require no lenses, phase shifters or moving parts. The technique involves the generation of appropriately designed diverse measurement modes to encode the scene information into a small number of measurements. We propose a novel boundary-tunable parallel plate waveguide-based metasurface antenna for computational microwave imaging. The proposed antenna leverages a switchable boundary of two layers of vias, to efficiently change the waveguide modes supported by the antenna cavity, leading to diverse measurement modes in the scene plane. The superiority of the boundary tuning approach over the frequency diversity approach for the same antenna is confirmed using the singular value decomposition. Synthetic imaging is performed using a coupled dipole model, which quantitatively proves the efficacy of the proposed antenna along with the robustness against noise down to 15 dB SNR. △ Less

Submitted 13 December, 2022; originally announced December 2022.

Evaluation of the hydrogen solubility and diffusivity in proton-conducting oxides by converting the PSL values of a tritium imaging plate

Authors: M. Khalid Hossain, K. Hashizume, Y. Hatano

Abstract: Proton-conducting oxides have potential applications in hydrogen sensors, hydrogen pumps, and other electrochemical devices including the tritium purification and recovery systems of nuclear fusion reactors. Although the distribution of hydrogen (H) in such oxide materials is an important aspect, its precise measurement is difficult. In the present study, the hydrogen solubility and diffusivity be… ▽ More Proton-conducting oxides have potential applications in hydrogen sensors, hydrogen pumps, and other electrochemical devices including the tritium purification and recovery systems of nuclear fusion reactors. Although the distribution of hydrogen (H) in such oxide materials is an important aspect, its precise measurement is difficult. In the present study, the hydrogen solubility and diffusivity behavior of BaZr0.9Y0.1O2.95 (BZY), BaZr0.955Y0.03Co0.015O2.97 (BZYC), and CaZr0.9In0.1O2.95 (CZI) were studied using tritiated heavy water vapor i.e., DTO (~2 kPa, tritium (T) = 0.1%) by converting the photostimulated luminescence (PSL) values of the imaging plate (IP). The samples were exposed to DTO vapor at 673 K for 2 h or at 873 K for 1 h. The disc-shaped oxide specimens (diameter ~7.5 mm; thickness ~2.3 mm; theoretical density (TD) > 98 %) were prepared by conventional powder metallurgy. The IP images of the specimen surfaces of all the three materials T-exposed revealed that BZY showed the most uniform T distribution with the highest tritium activity. The cross-sectional T concentration profiles of the cut specimens showed that T diffused deeper into BZY and BZYC than into CZI. The hydrogen solubility and diffusivity in the CZI specimen were lower than that in the BZY and BZYC specimens. This suggested that barium zirconates were more favorable proton conductors than calcium zirconates. △ Less

Submitted 12 November, 2022; originally announced November 2022.

Comments: 19 pages, 12 figures

Journal ref: Nuclear Materials and Energy. 25 (2020) 100875

First-principles calculations to investigate structural, elastic, electronic, thermodynamic, and thermoelectric properties of CaPd$_3$B$_4$O$_{12}$ (B = Ti, V) perovskite

Authors: M. H. K. Rubel, M. A. Hossain, M. Khalid Hossain, K. M. Hossain, A. A. Khatun, M. M. Rahaman, Md. Ferdous Rahman, M. M. Hossain, J. Hossain

Abstract: This study has explored numerous physical properties of CaPd$_3$Ti$_4$O$_{1}$2 (CPTO) and CaPd$_3$V$_4$O$_{12}$ (CPVO) quadruple perovskites employing the density functional theory (DFT) method. The mechanical permanence of these two compounds was observed by the Born stability criteria as well. The band structure of CPTO reveals a 0.88 and 0.46 eV direct narrow band gap while using GGA-mBJ and GG… ▽ More This study has explored numerous physical properties of CaPd$_3$Ti$_4$O$_{1}$2 (CPTO) and CaPd$_3$V$_4$O$_{12}$ (CPVO) quadruple perovskites employing the density functional theory (DFT) method. The mechanical permanence of these two compounds was observed by the Born stability criteria as well. The band structure of CPTO reveals a 0.88 and 0.46 eV direct narrow band gap while using GGA-mBJ and GGA-PBE potentials, respectively, which is an indication of its fascinating semiconducting nature. The calculated partial density of states indicates the strong hybridization between Pd-4d and O-2p orbital electrons for CPTO, whereas Pd-4d and V-3d-O-2p for CPVO. The study of the chemical bonding nature and electronic charge distribution graph reveals the coexistence of covalent O-V/Pd bonds, ionic O-Ti/Ca bonds, as well as metallic Ti/V-Ti/V bonding for both compounds. The Fermi surface of CPVO ensures a kind of hole as well as electron faces simultaneously, indicating the multifarious band characteristic. The prediction of the static real dielectric function (optical property) of CPTO at zero energy implies its promising dielectric nature. The photoconductivity and absorption coefficient of CPBO display good qualitative compliance with the consequences of band structure computations. The calculated thermodynamic properties manifest the thermodynamical stability for CPBO, whereas phonon dispersions of CPVO exhibit stable phonon dispersion in contrast to slightly unstable phonon dispersion of CPTO. The predicted Debye temperature ($θ_D$) has been utilized to correlate its topical features including thermoelectric behaviors. The studied thermoelectric transport properties of CPTO yielded the Seebeck coefficient (186 V/K), power factor (11.9 Wcm$^{-1}$K$^{-2}$), and figure of merit (ZT) value of about 0.8 at 800 K, indicating that this material could be a promising candidate for thermoelectric applications. △ Less

Submitted 12 November, 2022; originally announced November 2022.

Comments: 23 pages, 11 figures. arXiv admin note: substantial text overlap with arXiv:1904.05099

Journal ref: Results in Physics, 42 (2022) 105977

A Review of Applications, Prospects, and Challenges of Proton-Conducting Zirconates in Electrochemical Hydrogen Devices

Authors: M. Khalid Hossain, S. M. Kamrul Hasan, M. Imran Hossain, Ranjit C. Das, H. Bencherif, M. H. K. Rubel, Md. Ferdous Rahman, Tanvir Emrose, Kenichi Hashizume

Abstract: In the future, when fossil fuels are exhausted, alternative energy sources will be essential for everyday needs. Hydrogen-based energy can play a vital role in this aspect. This energy is green, clean, and renewable. Elec-trochemical hydrogen devices have been used extensively in nuclear power plants to manage hydrogen-based renewable fuel. Doped zirconate materials are commonly used as an electro… ▽ More In the future, when fossil fuels are exhausted, alternative energy sources will be essential for everyday needs. Hydrogen-based energy can play a vital role in this aspect. This energy is green, clean, and renewable. Elec-trochemical hydrogen devices have been used extensively in nuclear power plants to manage hydrogen-based renewable fuel. Doped zirconate materials are commonly used as an electrolyte in these electrochemical devices. These materials have excellent physical stability and high proton transport numbers, which make them suitable for multiple applications. Do** enhances the physical and electronic properties of zirconate materials and makes them ideal for practical applications. This review highlights the applications of zirconate-based pro-ton-conducting materials in electrochemical cells, particularly in tritium monitors, tritium recovery, hydrogen sensors, and hydrogen pump systems. The central section of this review summarizes recent investigations and provides a comprehensive insight into the various do** schemes, experimental setup, instrumentation, op-timum operating conditions, morphology, composition, and performance of zirconate electrolyte materials. In addition, different challenges that are hindering zirconate materials from achieving their full potential in elec-trochemical hydrogen devices are discussed. Finally, this paper lays out a few pathways for aspirants who wish to undertake research in this field. △ Less

Submitted 6 November, 2022; originally announced November 2022.

Comments: 31 pages, 13 figures

Journal ref: Nanomaterials 2022, 12(20), 3581

Design and numerical investigation of cadmium telluride (CdTe) and iron silicide (FeSi2) based double absorber solar cells to enhance power conversion efficiency

Authors: Md. Ferdous Rahman, M. J. A. Habib, Md. Hasan Ali, M. H. K. Rubel, M. Rounakul Islam, Abu Bakar Md. Ismail, M. Khalid Hossain

Abstract: Inorganic CdTe and FeSi2-based solar cells have recently drawn a lot of attention because they offer superior thermal stability and good optoelectronic properties compared to conventional solar cells. In this work, a unique alternative technique is presented by using FeSi2 as a secondary absorber layer and In2S3 as the window layer for improving photovoltaic (PV) performance parameters. Simulating… ▽ More Inorganic CdTe and FeSi2-based solar cells have recently drawn a lot of attention because they offer superior thermal stability and good optoelectronic properties compared to conventional solar cells. In this work, a unique alternative technique is presented by using FeSi2 as a secondary absorber layer and In2S3 as the window layer for improving photovoltaic (PV) performance parameters. Simulating on SCAPS-1D, the proposed double-absorber (Cu/FTO/In2S3/CdTe/FeSi2/Ni) structure is thoroughly examined and analyzed. The window layer thickness, absorber layer thickness, acceptor density (NA), donor density (ND), defect density (Nt), series resistance (RS), and shunt resistance (Rsh) were simulated in detail for optimization of the above configuration to improve PV performance. According to this study, 0.5 um is the optimized thickness for both the CdTe and FeSi2 absorber layers in order to maximize efficiency. Here, the value of the optimum window layer thickness is 50 nm. For using CdTe as a single absorber, the efficiency is achieved by 13.26%. But for using CdTe and FeSi2 as a dual absorber, the efficiency is enhanced and the obtaining value is 27.35%. The other parameters are also improved and the obtaining values for fill factor (FF) are 83.68%, open-circuit voltage (Voc) is 0.6566V, and short circuit current density (JSc) is 49.78 mA/cm2. Furthermore, the proposed model performs good at 300 K operating temperature. The addition of the FeSi2 layer to the cell structure has resulted in a significant quantum efficiency (QE) enhancement because of the rise in solar spectrum absorption at longer wavelengths. The findings of this work offer a promising approach for producing high-performance and reasonably priced CdTe-based solar cells. △ Less

Submitted 6 November, 2022; originally announced November 2022.

Comments: 17 pages, 10 figures

Journal ref: AIP Advances 12, 105317 (2022)

Effect of various electron and hole transport layers on the performance of CsPbI3-based perovskite solar cells: A numerical investigation in DFT, SCAPS-1D, and wxAMPS frameworks

Authors: M. Khalid Hossain, Mirza Humaun Kabir Rubel, G. F. Ishraque Toki, Intekhab Alam, Md. Ferdous Rahman, H. Bencherif

Abstract: CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density functional theory (DFT) study using the Cambridge Serial Total Energy Package (CASTEP) code for the cubic CsPbI3 absorber to compare and evaluate its structural, electr… ▽ More CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density functional theory (DFT) study using the Cambridge Serial Total Energy Package (CASTEP) code for the cubic CsPbI3 absorber to compare and evaluate its structural, electronic, and optical properties. The calculated electronic band gap (Eg) using the GGA-PBE approach of CASTEP was 1.483 eV for this CsPbI3 absorber. Moreover, the computed density of states (DOS) exhibited the dominant contribution from the Pb-5d orbital, and most charge also accumulated for the Pb atom as seen from the electronic charge density map. Fermi surface calculation showed multiband character, and optical properties were computed to investigate the optical response of CsPbI3. Furthermore, we used IGZO, SnO2, WS2, CeO2, PCBM, TiO2, ZnO, and C60 as the electron transport layers (ETLs), and Cu2O, CuSCN, CuSbS2, Spiro-MeOTAD, V2O5, CBTS, CFTS, P3HT, PEDOT: PSS, NiO, CuO, and CuI as the hole transport layers (HTLs) to identify the best HTL/CsPbI3/ETL combinations using the SCAPS-1D solar cell simulation software. Among 96 device structures, the best-optimized device structure, ITO/TiO2/CsPbI3/CBTS/Au was identified, which exhibited an efficiency of 17.9%. The effect of absorber and ETL thickness, series resistance, shunt resistance, and operating temperature was also evaluated for the six best devices along with their corresponding generation rate, recombination rate, capacitance-voltage, current density-voltage, and quantum efficiency characteristics. The obtained results from SCAPS-1D were also compared with wxAMPS simulation software. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 34 pages, 12 figures, Supporting Information (3 figures)

Numerical modeling of CuSbSe2-based dual-heterojunction thin film solar cell with CGS back surface layer

Authors: Bipin Saha, Bipanko Kumar Mondal, Shaikh Khaled Mostaque, Mainul Hossain, Jaker Hossain

Abstract: Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high optical absorption coefficient of CuSbSe2. Conventional single heterojunction CuSbSe2 solar cells suffer from high recombination rate at the interfaces and the prese… ▽ More Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high optical absorption coefficient of CuSbSe2. Conventional single heterojunction CuSbSe2 solar cells suffer from high recombination rate at the interfaces and the presence of a Schottky barrier at the back contact, which limit their power conversion efficiencies (PCEs). In this study, we propose a dual-heterojunction n-ZnSe/p-CuSbSe2/p+-CGS solar cell, having copper gallium selenide (CGS) as the back surface field (BSF) layer. The BSF layer absorbs longer wavelength photons through a tail-states-assisted (TSA) two-step upconversion process, leading to enhanced conversion efficiency. Numerical simulations were carried out using SCAPS-1D to investigate the performance of the proposed solar cell with respect to absorber layer thickness, do** concentrations and defect densities. The simulation results exhibit PCE as high as 43.77% for the dual-heterojunction solar cell as compared to 27.74% for the single heterojunction n-ZnSe/p-CuSbSe2 counterpart. The dual-heterojunction structure has, therefore, the potential to approach the Shockley-Queisser (SQ) detailed balance limit and can lead to extremely high PCEs in emerging thin film solar cells. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 21 pages, 7 figures, 2 tables

Pandemic Vulnerability Index of US Cities: A Hybrid Knowledge-based and Data-driven Approach

Authors: Md. Shahinoor Rahman, Kamal Chandra Paul, Md. Mokhlesur Rahman, Jim Samuel, Jean-Claude Thill, Md. Amjad Hossain, G. G. Md. Nawaz Ali

Abstract: Cities become mission-critical zones during pandemics and it is vital to develop a better understanding of the factors that are associated with infection levels. The COVID-19 pandemic has impacted many cities severely; however, there is significant variance in its impact across cities. Pandemic infection levels are associated with inherent features of cities (e.g., population size, density, mobili… ▽ More Cities become mission-critical zones during pandemics and it is vital to develop a better understanding of the factors that are associated with infection levels. The COVID-19 pandemic has impacted many cities severely; however, there is significant variance in its impact across cities. Pandemic infection levels are associated with inherent features of cities (e.g., population size, density, mobility patterns, socioeconomic condition, and health environment), which need to be better understood. Intuitively, the infection levels are expected to be higher in big urban agglomerations, but the measurable influence of a specific urban feature is unclear. The present study examines 41 variables and their potential influence on COVID-19 cases and fatalities. The study uses a multi-method approach to study the influence of variables, classified as demographic, socioeconomic, mobility and connectivity, urban form and density, and health and environment dimensions. This study develops an index dubbed the PVI-CI for classifying the pandemic vulnerability levels of cities, grou** them into five vulnerability classes, from very high to very low. Furthermore, clustering and outlier analysis provides insights on the spatial clustering of cities with high and low vulnerability scores. This study provides strategic insights into levels of influence of key variables upon the spread of infections as well as fatalities, along with an objective ranking for the vulnerability of cities. Thus it provides critical wisdom needed for urban healthcare policy and resource management. The pandemic vulnerability index calculation method and the process present a blueprint for the development of similar indices for cities in other countries, leading to a better understanding and improved pandemic management for urban areas and post-pandemic urban planning across the world. △ Less

Submitted 11 March, 2022; originally announced March 2022.

Comments: 22 pages, 7 figures

Facile synthesis of Cu2O nanorods in the presence of NaCl by SILAR method and its characterizations

Authors: Md. Alauddin Hossain, Syed Farid Uddin Farhad, Nazmul Islam Tanvir, Jang Hyo Chang, Mohammad Atiqur Rahman, Tooru Tanaka, Qixin Guo, Jamal Uddin, Md Abdul Majed Patwary

Abstract: Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties of synthesized Cu2O nanorod films have been studied by a variety of characterization tools. Structural analyses by XRD confirmed the polycrystalline Cu2O phase w… ▽ More Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties of synthesized Cu2O nanorod films have been studied by a variety of characterization tools. Structural analyses by XRD confirmed the polycrystalline Cu2O phase with (111) preferential growth. Raman scattering spectroscopic measurements conducted at room temperature also showed characteristic peaks of the pure Cu2O phase. The surface resistivity of the Cu2O nanorod films decreased from 15,142 to 685 Ohm.cm with the addition of NaCl from 0 to 4 mmol, and then exhibited an opposite trend with further addition of NaCl. The optical bandgap of the synthesized Cu2O nanorod films was observed as 1.88 - 2.36 eV, while the temperature-dependent activation energies of the Cu2O films were measured as about 0.14 - 0.21 eV. SEM morphologies demonstrated Cu2O nanorod as well as closely packed spherical grains with the alteration of NaCl concentration. The Cu2O phase of nanorods was found stable up to 230 0C corroborating the optical bandgap results of the same. The film fabricated in presence of 4 mmol of NaCl showed the lowest resistivity and activation energy as well comparatively uniform nanorod morphology. Our studies demonstrate that the nominal presence of NaCl electrolytes in the pre-cursor solutions has a significant impact on the physical properties of Cu2O nanorod films which could be beneficial in optoelectronic research. △ Less

Submitted 22 March, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: 22 pages, 7 figures

Journal ref: Royal Society Open Science (2022)

Simulating surface height and terminus position for marine outlet glaciers using a level set method with data assimilation

Authors: M. Alamgir Hossain, Sam Pimentel, John M. Stockie

Abstract: We implement a data assimilation framework for integrating ice surface and terminus position observations into a numerical ice-flow model. The model uses the well-known shallow shelf approximation (SSA) coupled to a level set method to capture ice motion and changes in the glacier geometry. The level set method explicitly tracks the evolving ice-atmosphere and ice-ocean boundaries for a marine out… ▽ More We implement a data assimilation framework for integrating ice surface and terminus position observations into a numerical ice-flow model. The model uses the well-known shallow shelf approximation (SSA) coupled to a level set method to capture ice motion and changes in the glacier geometry. The level set method explicitly tracks the evolving ice-atmosphere and ice-ocean boundaries for a marine outlet glacier. We use an Ensemble Transform Kalman Filter to assimilate observations of ice surface elevation and lateral ice extent by updating the level set function that describes the ice interface. Numerical experiments on an idealized marine-terminating glacier demonstrate the effectiveness of our data assimilation approach for tracking seasonal and multi-year glacier advance and retreat cycles. The model is also applied to simulate Helheim Glacier, a major tidewater-terminating glacier of the Greenland Ice Sheet that has experienced a recent history of rapid retreat. By assimilating observations from remotely-sensed surface elevation profiles we are able to more accurately track the migrating glacier terminus and glacier surface changes. These results support the use of data assimilation methodologies for obtaining more accurate predictions of short-term ice sheet dynamics. △ Less

Submitted 28 January, 2022; originally announced January 2022.

Comments: 30 pages, 22 figures

MSC Class: 35M10; 65M06; 76D07; 86A40

Recent progress of fabrication, characterization, and applications of anodic aluminum oxide (AAO) membrane: A review

Authors: Saher Manzoor, M. Waseem Ashraf, Shahzadi Tayyaba, M. Khalid Hossain

Abstract: The progress of membrane technology with the development of membranes with controlled parameters led to porous membranes. These membranes can be formed using different methods and have numerous applications in science and technology. Anodization of aluminum in this aspect is an electro-synthetic process that changes the surface of the metal through oxidation to deliver an anodic oxide layer. This… ▽ More The progress of membrane technology with the development of membranes with controlled parameters led to porous membranes. These membranes can be formed using different methods and have numerous applications in science and technology. Anodization of aluminum in this aspect is an electro-synthetic process that changes the surface of the metal through oxidation to deliver an anodic oxide layer. This process results in a self-coordinated, exceptional cluster of round and hollow formed pores with controllable pore widths, periodicity, and thickness. After the initial introduction, the paper proceeds with a brief overview of anodizing process. That engages anodic aluminum oxide (AAO) layers to be used as formats in various nanotechnology applications without the necessity for expensive lithographical systems. This review article surveys the current status of the investigation on AAO membranes. A comprehensive analysis is performed on AAO membranes in applications; filtration, sensors, drug delivery, template-assisted growth of various nanostructures. Their multiple usages in nanotechnology have also been discussed to gather nanomaterials and devices or unite them into specific applications, such as nano-electronic gadgets, channel layers, and clinical platforms tissue designing. From this review, the fact that the specified enhancement of properties of AAO can be done by varying geometric parameters of AAO has been highlighted. No review paper focused on a detailed discussion of applications of AAO with prospects and challenges. This review paper represents the formation, properties, applications with objective consideration of the prospects and challenges of AAO applications. The prospects may appeal to researchers to promote the development of unique membranes with functionalization and controlled geometric parameters and check the feasibility of the AAO membranes in nano-devices. △ Less

Submitted 15 December, 2021; originally announced December 2021.

Comments: 36 pages, 19 figures, 8 tables

Journal ref: Computer Modeling in Engineering and Sciences, 135 (2023) 1007-1052

Comparative studies of hydrogen dissolution and release behavior in zirconate oxides by TDS and TMAP4 analysis

Authors: M. Khalid Hossain, Kenichi Hashizume

Abstract: Proton-conducting oxides are potential materials for electrochemical devices such as fuel cells, hydrogen pumps, hydrogen sensors, and the tritium purification and recovery system in nuclear fusion reactors. The hydrogen concentration in oxide materials is important, but its precise measurement is difficult. In this study, thermal desorption spectroscopy (TDS) was used to investigate hydrogen diss… ▽ More Proton-conducting oxides are potential materials for electrochemical devices such as fuel cells, hydrogen pumps, hydrogen sensors, and the tritium purification and recovery system in nuclear fusion reactors. The hydrogen concentration in oxide materials is important, but its precise measurement is difficult. In this study, thermal desorption spectroscopy (TDS) was used to investigate hydrogen dissolution and release behavior in proton-conducting oxides, yttrium (Y), and cobalt (Co) doped barium-zirconates in the temperature range of 673-1273 K using deuterium (D2) and heavy water (D2O). Specimens were prepared with conventional powder metallurgy: the powder of three zirconates, BaZr0.9Y0.1O3-a (BZY), BaZr0.955Y0.03Co0.015O3-a (BZYC), and CaZr0.9In0.1O2.95 (CZI) was pressed into discs and fired in the air at 1873 K for 20 h. The densities of the sintered BZY, BZYC, and CZI specimens were 98 percent, 99.7 percent, and 99.5 percent of the theoretical densities respectively. XRD, SEM, and EDX were performed for the structural and morphological analysis of the sintered samples. From TDS measurement, a similar trend of temperature-dependent hydrogen solubility was obtained for all samples compared to the tritium imaging plate (TIP) methods literature data of HT- and DTO-exposed samples. To compare the experimental results of the deuterium desorption profile derived by TDS analysis, the simulation code of the tritium migration analysis program, version 4 (TMAP4) was employed. △ Less

Submitted 8 December, 2021; originally announced December 2021.

Comments: 25 pages, 13 figures, 10 tables

Journal ref: Journal of Alloys and Compounds, 907 (2022) 164436

A comprehensive first principles calculations on (Ba0.82K0.18)(Bi0.53Pb0.47)O3 single-cubic-perovskite superconductor

Authors: Mirza H. K. Rubel, Sujon Kumar Mitro, Khandaker Monower Hossain, Md. Mijanur Rahaman, M. Khalid Hossain, Jaker Hossain, B. K. Mondal, Istiak Ahmed, A. K. M. A. Islam, A. El-Denglawey

Abstract: In this present study, the pseudopotential plane-wave (PP-PW) pathway in the scheme of density functional theory (DFT) is utilized to investigate the various physical properties on (Ba0.82K0.18)(Bi0.53Pb0.47)O3 (BKBPO) single perovskite superconductor. We have analyzed elastic constants and moduli at zero and elevated pressures (up to 25 GPa) as well. We also have investigated the anisotropic natu… ▽ More In this present study, the pseudopotential plane-wave (PP-PW) pathway in the scheme of density functional theory (DFT) is utilized to investigate the various physical properties on (Ba0.82K0.18)(Bi0.53Pb0.47)O3 (BKBPO) single perovskite superconductor. We have analyzed elastic constants and moduli at zero and elevated pressures (up to 25 GPa) as well. We also have investigated the anisotropic nature incorporating both the theoretical indices and graphical representations in 2D and 3D dimensions, which reveals a high level of anisotropy. The flatness of the energy bands near EF is a sign of Van-Hf singularity that might increase the electron pairing and origination of high-TC superconductivity. The computed band structure exhibits its metallic characteristics is confirmed by band overlap**. A band of DOS is formed for the strong hybridization of the constituent elements. The orbital electrons of O-2p contribute most dominantly at EF in contrast to all orbital electrons. The orbital electrons at the EF are higher from both the partial density of states and charge density map** investigation. The coexistence of the electron and hole-like Fermi sheets exhibits the multi-band nature of BKBPO. On the other hand, Fermi surfaces with flat faces promote transport features and Fermi surface nesting as well. The calculated value of the electron-phonon coupling constant (λ = 1.46) is slightly lower than the isostructural superconductor, which indicates that the studied BKBPO can be treated as a strongly coupled superconductor similar to the reported isostructural perovskite superconductors. Furthermore, the thermodynamic properties have been evaluated and analyzed at elevated temperature and pressure by using harmonic Debye approximation (QHDA). △ Less

Submitted 7 December, 2021; originally announced December 2021.

Comments: 20 pages, 7 figures, 6 tables

Journal ref: Materials Today Communications, 33 (2022) 104302

Cryogenic Memory Technologies

Authors: Shamiul Alam, Md Shafayat Hossain, Srivatsa Rangachar Srinivasa, Ahmedullah Aziz

Abstract: The surging interest in quantum computing, space electronics, and superconducting circuits has led to new developments in cryogenic data storage technology. Quantum computers promise to far extend our processing capabilities and may allow solving currently intractable computational challenges. Even with the advent of the quantum computing era, ultra-fast and energy-efficient classical computing sy… ▽ More The surging interest in quantum computing, space electronics, and superconducting circuits has led to new developments in cryogenic data storage technology. Quantum computers promise to far extend our processing capabilities and may allow solving currently intractable computational challenges. Even with the advent of the quantum computing era, ultra-fast and energy-efficient classical computing systems are still in high demand. One of the classical platforms that can achieve this dream combination is superconducting single flux quantum (SFQ) electronics. A major roadblock towards implementing scalable quantum computers and practical SFQ circuits is the lack of suitable and compatible cryogenic memory that can operate at 4 Kelvin (or lower) temperature. Cryogenic memory is also critically important in space-based applications. A multitude of device technologies have already been explored to find suitable candidates for cryogenic data storage. Here, we review the existing and emerging variants of cryogenic memory technologies. To ensure an organized discussion, we categorize the family of cryogenic memory platforms into three types: superconducting, non-superconducting, and hybrid. We scrutinize the challenges associated with these technologies and discuss their future prospects. △ Less

Submitted 1 July, 2022; v1 submitted 17 November, 2021; originally announced November 2021.

Comments: 21 pages, 6 figures, 1 table

Journal ref: Nature Electronics (2023)

Room-temperature quantum spin Hall edge state in a higher-order topological insulator Bi$_4$Br$_4$

Authors: Nana Shumiya, Md Shafayat Hossain, Jia-Xin Yin, Zhiwei Wang, Maksim Litskevich, Chiho Yoon, Yongkai Li, Ying Yang, Yu-Xiao Jiang, Guangming Cheng, Yen-Chuan Lin, Qi Zhang, Zi-Jia Cheng, Tyler A. Cochran, Daniel Multer, Xian P. Yang, Brian Casas, Tay-Rong Chang, Titus Neupert, Zhujun Yuan, Shuang Jia, Hsin Lin, Nan Yao, Luis Balicas, Fan Zhang , et al. (2 additional authors not shown)

Abstract: Room-temperature realization of macroscopic quantum phenomena is one of the major pursuits in fundamental physics. The quantum spin Hall state, a topological quantum phenomenon that features a two-dimensional insulating bulk and a helical edge state, has not yet been realized at room temperature. Here, we use scanning tunneling microscopy to visualize a quantum spin Hall edge state on the surface… ▽ More Room-temperature realization of macroscopic quantum phenomena is one of the major pursuits in fundamental physics. The quantum spin Hall state, a topological quantum phenomenon that features a two-dimensional insulating bulk and a helical edge state, has not yet been realized at room temperature. Here, we use scanning tunneling microscopy to visualize a quantum spin Hall edge state on the surface of the higher-order topological insulator Bi4Br4. We find that the atomically resolved lattice exhibits a large insulating gap of over 200meV, and an atomically sharp monolayer step edge hosts a striking in-gap gapless state, suggesting the topological bulk-boundary correspondence. An external magnetic field can gap the edge state, consistent with the time-reversal symmetry protection inherent to the underlying topology. We further identify the geometrical hybridization of such edge states, which not only attests to the Z2 topology of the quantum spin Hall state but also visualizes the building blocks of the higher-order topological insulator phase. Remarkably, both the insulating gap and topological edge state are observed to persist up to 300K. Our results point to the realization of the room-temperature quantum spin Hall edge state in a higher-order topological insulator. △ Less

Submitted 5 September, 2022; v1 submitted 11 October, 2021; originally announced October 2021.

Journal ref: Nature Materials (2022)

Synthesis and Characterizations of CH3NH3PbI3:ZnS Microrods for Optoelectronic Applications

Authors: Mohammad Tanvir Ahmed, Shariful Islam, Muhammad Shahriar Bashar, Md. Abul Hossain, Farid Ahmed

Abstract: Organometallic perovskite is one of the potential materials in the various optoelectronic research fields. This research work demonstrates the synthesis of CH3NH3PbI3-ZnS microrods via one-step spin coating for optoelectronic applications. Incorporation of ZnS in the perovskite material caused bandgap variation in the visible wavelength range. Organometallic perovskite is one of the potential materials in the various optoelectronic research fields. This research work demonstrates the synthesis of CH3NH3PbI3-ZnS microrods via one-step spin coating for optoelectronic applications. Incorporation of ZnS in the perovskite material caused bandgap variation in the visible wavelength range. △ Less

Submitted 16 February, 2022; v1 submitted 27 September, 2021; originally announced September 2021.

Journal ref: Advances in Materials Science and Engineering, vol. 2022, Article ID 7606339, 14 pages, 2022

Estimation of Rain Attenuation of Earth-to-Satellite Link over Nepal for Ku & Ka Bands

Authors: Jasmul Alam, Md. Sakir Hossain, Jauwad Ansari, Abu Zafar Md. Imran, Imtiaz Kamrul

Abstract: Due to the extensive use of lower frequency bands & huge demand of large bandwidth in satellite communications, engineers need to use the higher frequency bands such as Ku to Ka bands. However, the rain attenuation is severe in these bands. Before installing an earth station, the estimation of the rain attenuation is a prerequisite task to know the required fade margin to ensure a certain availabi… ▽ More Due to the extensive use of lower frequency bands & huge demand of large bandwidth in satellite communications, engineers need to use the higher frequency bands such as Ku to Ka bands. However, the rain attenuation is severe in these bands. Before installing an earth station, the estimation of the rain attenuation is a prerequisite task to know the required fade margin to ensure a certain availability of the network. In this paper, we estimate the rain attenuation for different regions of Nepal. The R-H and ITU models are used for rain rate and rain attenuation estimation, respectively. A significant temporal and spatial variation in rain attenuation is observed. Among three different regions of Nepal, namely Terai, Hilly, and Himalaya, while the maximum rain attenuation is found in Terai region, the minimum is in Himalaya. Jhapa of the Terai region experiences the highest attenuation and requires 80 dB and 24 dB fade margin for Ka and Ku bands, respectively. Solukhumbu of Himalaya region, on the other hand, is found to be the least rain attenuation affected site. The required fade margin for an earth station site in Solukhumbu for using Ku and Ka bands are 12 dB and 40 dB, respectively. The minimum attenuation, which is observed in November and December, is several times lower compared to the highest rain attenuation, observed in July. The minimum attenuation caused by the Ka band is higher than the maximum attenuation caused by the Ku band irrespective of the locations of the earth station sites. △ Less

Submitted 17 August, 2021; originally announced September 2021.

Comments: International Conference on Robotics,Electrical and Signal Processing Techniques (ICREST), 2018

Probing anisotropy in epitaxial Fe/Pt bilayers by spin-orbit torque ferromagnetic resonance

Authors: Mohammad Tomal Hossain, Sergi Lendinez, Laura Scheuer, Evangelos Papaioannou, M. Benjamin Jungfleisch

Abstract: We report the generation and detection of spin-orbit torque ferromagnetic resonance (STFMR) in micropatterned epitaxial Fe/Pt bilayers grown by molecular beam epitaxy. The magnetic field dependent measurements at an in-plane magnetic field angle of 45 degrees with respect to the microwave-current direction reveal the presence of two distinct voltage peaks indicative of a strong magnetic anisotropy… ▽ More We report the generation and detection of spin-orbit torque ferromagnetic resonance (STFMR) in micropatterned epitaxial Fe/Pt bilayers grown by molecular beam epitaxy. The magnetic field dependent measurements at an in-plane magnetic field angle of 45 degrees with respect to the microwave-current direction reveal the presence of two distinct voltage peaks indicative of a strong magnetic anisotropy. We show that STFMR can be employed to probe the underlying magnetic properties including the anisotropies in the Fe layer. We compare our STFMR results with broadband ferromagnetic resonance spectroscopy of the unpatterned bilayer thin films. The experimental STFMR measurements are interpreted using an analytical formalism and further confirmed using micromagnetic modeling, which shed light on the field-dependent magnetization alignment in the microstructures responsible for the STFMR rectification. Our results demonstrate a simple and efficient method for determining magnetic anisotropies in microstructures by means of rf spectroscopy. △ Less

Submitted 20 August, 2021; originally announced August 2021.

Isotopic effect of proton conductivity in barium-zirconates for various hydrogen-containing atmospheres

Authors: M. Khalid Hossain, T. Yamamoto, K. Hashizume

Abstract: Among various perovskite proton conducting oxides, Y-doped BaZrO3 perovskite is a promising material for electrochemical hydrogen devices due to the good chemical stability and higher proton conductivity at higher operating temperatures like 500-800 °C. For the practical application of the functional BaZrO3 proton conductor in the electrochemical hydrogen devices, its necessary to understand the i… ▽ More Among various perovskite proton conducting oxides, Y-doped BaZrO3 perovskite is a promising material for electrochemical hydrogen devices due to the good chemical stability and higher proton conductivity at higher operating temperatures like 500-800 °C. For the practical application of the functional BaZrO3 proton conductor in the electrochemical hydrogen devices, its necessary to understand the isotopic effect of proton conductivity. To understand the isotopic effect of proton conductivity in the barium zirconates, in this study, the proton conductivity in the Ar, (Ar + 4% H2), (Ar + 4% D2), (Ar + H2O), (Ar + D2O), and O2 atmospheres were measured for two different compositions: BaZr0.9Y0.1O2.95 (BZY), and BaZr0.955Y0.03Co0.015O2.97 (BZYC) in the temperature range from 500 °C to 1000 °C. By comparing the obtained results, a significant difference in sinterability, conductivity, and the isotopic effect was observed due to the co-do** of the Co element in the BaZr1-xYxO3-a proton conductor. △ Less

Submitted 28 July, 2021; originally announced July 2021.

Comments: 14 pages, 5 Tables, 10 figures

Journal ref: Journal of Alloys and Compounds, 163957 (2022)

Characterization of Broadband Focusing Microwave Metasurfaces at Oblique Incidence

Authors: Ashif A. Fathnan, Toufiq M. Hossain, Dadin Mahmudin, Yusuf N. Wijayanto, David A. Powell

Abstract: We report the characterization of an achromatic focusing metasurface at oblique incident angles. We show that in addition to the inherent off-axis aberrations that occurs due to the hyperbolic phase profile of the metasurface, the focusing performance is significantly degraded due to the meta-atoms' angular dispersion. To obtain insights into how the angular and spectral bandwidth of meta-atoms re… ▽ More We report the characterization of an achromatic focusing metasurface at oblique incident angles. We show that in addition to the inherent off-axis aberrations that occurs due to the hyperbolic phase profile of the metasurface, the focusing performance is significantly degraded due to the meta-atoms' angular dispersion. To obtain insights into how the angular and spectral bandwidth of meta-atoms relate to the metasurface focusing performance, point-dipole models are used which incorporate different aspect's of the meta-atoms' angular response. It is emphasized that despite the meta-atoms being designed under the assumption that they support a single dipolar resonance, other resonances exist within the meta-atom geometry and become stronger at oblique incidence. These resonances disturb the designed phase and amplitude responses, resulting in lower focusing efficiency at higher incident angles. The modelling of higher order modes leads to good agreement with the experimental measurements, confirming that angular dispersion of the meta-atoms is the dominant mechanism in determining off-axis aberrations. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Observation of spontaneous valley polarization of itinerant electrons

Authors: Md. S. Hossain, M. K. Ma, K. A. Villegas Rosales, Y. J. Chung, L. N. Pfeiffer, K. W. West, K. W. Baldwin, M. Shayegan

Abstract: Memory or transistor devices based on electron's spin rather than its charge degree of freedom offer certain distinct advantages and comprise a cornerstone of spintronics. Recent years have witnessed the emergence of a new field, valleytronics, which seeks to exploit electron's valley index rather than its spin. An important component in this quest would be the ability to control the valley index… ▽ More Memory or transistor devices based on electron's spin rather than its charge degree of freedom offer certain distinct advantages and comprise a cornerstone of spintronics. Recent years have witnessed the emergence of a new field, valleytronics, which seeks to exploit electron's valley index rather than its spin. An important component in this quest would be the ability to control the valley index in a convenient fashion. Here we show that the valley polarization can be switched from zero to one by a small reduction in density, simply tuned by a gate bias, in a two-dimensional electron system. This phenomenon arises fundamentally as a result of electron-electron interaction in an itinerant, dilute electron system. Essentially, the kinetic energy favors an equal distribution of electrons over the available valleys, whereas the interaction between electrons prefers single-valley occupancy below a critical density. The gate-bias-tuned transition we observe is accompanied by a sudden, two-fold change in sample resistance, making the phenomenon of interest for potential valleytronic transistor device applications. Our observation constitutes a quintessential demonstration of valleytronics in a very simple experiment. △ Less

Submitted 15 November, 2020; v1 submitted 12 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Lett. 127, 116601 (2021)

A Non-Volatile Cryogenic Random-Access Memory Based on the Quantum Anomalous Hall Effect

Authors: Shamiul Alam, Md Shafayat Hossain, Ahmedullah Aziz

Abstract: The interplay between ferromagnetism and topological properties of electronic band structures leads to a precise quantization of Hall resistance without any external magnetic field. This so-called quantum anomalous Hall effect (QAHE) is born out of topological correlations, and is oblivious of low-sample quality. It was envisioned to lead towards dissipationless and topologically protected electro… ▽ More The interplay between ferromagnetism and topological properties of electronic band structures leads to a precise quantization of Hall resistance without any external magnetic field. This so-called quantum anomalous Hall effect (QAHE) is born out of topological correlations, and is oblivious of low-sample quality. It was envisioned to lead towards dissipationless and topologically protected electronics. However, no clear framework of how to design such an electronic device out of it exists. Here we construct an ultra-low power, non-volatile, cryogenic memory architecture leveraging the QAHE phenomenon. Our design promises orders of magnitude lower cell area compared with the state-of-the-art cryogenic memory technologies. We harness the fundamentally quantized Hall resistance levels in moiré graphene heterostructures to store non-volatile binary bits (1, 0). We perform the memory write operation through controlled hysteretic switching between the quantized Hall states, using nano-ampere level currents with opposite polarities. The non-destructive read operation is performed by sensing the polarity of the transverse Hall voltage using a separate pair of terminals. We custom design the memory architecture with a novel sensing mechanism to avoid accidental data corruption, ensure highest memory density and minimize array leakage power. Our design is transferrable to any material platform exhibiting QAHE, and provides a pathway towards realizing topologically protected memory devices. △ Less

Submitted 30 October, 2020; originally announced November 2020.

Comments: Main text and Supplement: 15 pages

Assessment of a symmetry preserving JFNK method for atmospheric convection

Authors: M. Alamgir Hossain, Jahrul M Alam

Abstract: Numerical simulations of nonhydrostatic atmospheric flow, based on linearly decoupled semi-implicit or fully-implicit techniques, usually solve linear systems by a pre-conditioned Krylov method without preserving the skew-symmetry of convective operators. We propose to perform atmospheric simulations in such a fully-implicit manner that the difference operators preserve both the skew-symmetry and… ▽ More Numerical simulations of nonhydrostatic atmospheric flow, based on linearly decoupled semi-implicit or fully-implicit techniques, usually solve linear systems by a pre-conditioned Krylov method without preserving the skew-symmetry of convective operators. We propose to perform atmospheric simulations in such a fully-implicit manner that the difference operators preserve both the skew-symmetry and the tightly nonlinear coupling of the differential operators. We demonstrate that a symmetry-preserving Jacobian-free Newton-Krylov~(JFNK) method mimics a balance between convective transport and turbulence dissipation. We present a wavelet method as an effective symmetry preserving discretization technique. The symmetry-preserving JFNK method for solving equations of nonhydrostatic atmospheric flows has been examined using two benchmark simulations of penetrative convection -- a) dry thermals rising in a neutrally stratified and stably stratified environment, and b) urban heat island circulations for effects of the surface heat flux $H_0$ varying in the range of $25 \le H_0 \le 930$Wm$^{-2}$.The results show that an eddy viscosity model provides the necessary dissipation of the subgrid-scale modes, while the symmetry-preserving JFNK method provides the conservation of mass and energy at a satisfactory level. Comparisons of the results from a laboratory experiment of heat island circulation and a field measurement of potential temperature also suggest the modelling accuracy of the present symmetry-preserving JFNK framework. △ Less

Submitted 20 July, 2020; originally announced July 2020.

An open-access clicker question bank for numerical analysis

Authors: M. Alamgir Hossain, Petra M. Menz, John M. Stockie

Abstract: We present a question bank consisting of over 250 multiple-choice and true-false questions covering a broad range of material typically taught in an introductory undergraduate course in numerical analysis or scientific computing. The questions are ideal for polling students during lectures by means of a student response system that uses clicker remotes or smartphones running a suitable app. We des… ▽ More We present a question bank consisting of over 250 multiple-choice and true-false questions covering a broad range of material typically taught in an introductory undergraduate course in numerical analysis or scientific computing. The questions are ideal for polling students during lectures by means of a student response system that uses clicker remotes or smartphones running a suitable app. We describe our experiences implementing these clicker questions in a recent class and provide evidence of their effectiveness in terms of testing students' prior knowledge, gauging understanding of new material, increasing participation, and especially improving student satisfaction. Our conclusions are supported by a mid-semester student survey as well as anecdotal observations. The question bank has been released as an open-access educational resource under a Creative Commons license (BY-NC-SA) for free use by the mathematics community. △ Less

Submitted 26 May, 2020; originally announced May 2020.

MSC Class: 65-01; 97Nxx

A linearised consistent mixed displacement-pressure formulation for hyperelasticity

Authors: Chennakesava Kadapa, Mokarram Hossain

Abstract: We propose a novel mixed displacement-pressure formulation based on an energy functional that takes into account the relation between the pressure and the volumetric energy function. We demonstrate that the proposed two-field mixed displacement-pressure formulation is not only applicable for nearly and truly incompressible cases but also is consistent in the compressible regime. Furthermore, we pr… ▽ More We propose a novel mixed displacement-pressure formulation based on an energy functional that takes into account the relation between the pressure and the volumetric energy function. We demonstrate that the proposed two-field mixed displacement-pressure formulation is not only applicable for nearly and truly incompressible cases but also is consistent in the compressible regime. Furthermore, we prove with analytical derivation and numerical results that the proposed two-field formulation is a simplified and efficient alternative for the three-field displacement-pressure-Jacobian formulation for hyperelastic materials whose strain energy density functions are decomposed into deviatoric and volumetric parts. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: Accepted for publication in Mechanics of Advanced Materials and Structures

Homogenization of Layered Media: Intrinsic and Extrinsic Symmetry Breaking

Authors: Igor Tsukerman, A N M Shahriyar Hossain, Y. D. Chong

Abstract: A general homogenization procedure for periodic electromagnetic structures, when applied to layered media with asymmetric lattice cells, yields an effective tensor with magnetoelectric coupling. Accurate results for transmission and reflection are obtained even in cases where classical effective medium theory breaks down. Magnetoelectric coupling accounts for symmetry breaking in reflection and tr… ▽ More A general homogenization procedure for periodic electromagnetic structures, when applied to layered media with asymmetric lattice cells, yields an effective tensor with magnetoelectric coupling. Accurate results for transmission and reflection are obtained even in cases where classical effective medium theory breaks down. Magnetoelectric coupling accounts for symmetry breaking in reflection and transmission when a non-symmetric structure is illuminated from two opposite sides. △ Less

Submitted 18 March, 2020; originally announced March 2020.

Comments: 4 pages, 3 figures

Interaction Graphs for Cascading Failure Analysis in Power Grids: A Survey

Authors: Upama Nakarmi, Mahshid Rahnamay Naeini, Md Jakir Hossain, Md Abul Hasnat

Abstract: Understanding and analyzing cascading failures in power grids have been the focus of many researchers for years. However, the complex interactions among the large number of components in these systems and their contributions to cascading failures are not yet completely understood. Therefore, various techniques have been developed and used to model and analyze the underlying interactions among the… ▽ More Understanding and analyzing cascading failures in power grids have been the focus of many researchers for years. However, the complex interactions among the large number of components in these systems and their contributions to cascading failures are not yet completely understood. Therefore, various techniques have been developed and used to model and analyze the underlying interactions among the components of the power grid with respect to cascading failures. Such methods are important to reveal the essential information that may not be readily available from power system physical models and topologies. In general, the influences and interactions among the components of the system may occur both locally and at distance due to the physics of electricity governing the power flow dynamics as well as other functional and cyber dependencies among the components of the system. To infer and capture such interactions, data-driven approaches or techniques based on the physics of electricity have been used to develop graph-based models of interactions among the components of the power grid. In this survey, various methods of develo** interaction graphs as well as studies on the reliability and cascading failure analysis of power grids using these graphs have been reviewed. △ Less

Submitted 14 May, 2020; v1 submitted 1 November, 2019; originally announced November 2019.

Study and analysis the Cu nanoparticle assisted texturization forming low reflective silicon surface for solar cell application

Authors: M. K. Basher, R. Mishan, S. Biswas, M. Khalid Hossain, M. A. R. Akand, M. A. Matin

Abstract: Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trap** properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely temperature and time of Cu-assisted chemical etching was thoroughly investigated for the optimization of the light absorption properties. P-type monocrystalline… ▽ More Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trap** properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely temperature and time of Cu-assisted chemical etching was thoroughly investigated for the optimization of the light absorption properties. P-type monocrystalline wafers were selectively treated with Cu(NO3)2.3H2O:HF:H2O2:DI water solution at 50 deg.C for five different time duration. The entire process was repeated at five different temperatures for 20min as well to study the relation between etching temperature and surface reflectance. Sonication bathing was used for the removal of the deposited Cu atoms from the surface with the variation of time and the effect was examined using energy dispersive spectroscopy (EDS). Field emission scanning electron microscopy (FESEM) and UV/VIS spectroscopy were conducted to study the surface morphology and light absorbance respectively. Inverted shapes almost similar to inverted pyramids or porous surface were found randomly on the surface of the wafer. The effect of temperature was found more significant compared to the effect of time variation. An optimum light reflectance was found at 50 deg.C for 20 min of texturization. Atomic force microscopy (AFM) of the textured sample revealed the average depth of pyramidal shape was about 1.58 micro meter. EDS results showed a proportional relation between time and Cu removal process, and a complete Cu atoms free textured surface after 25 min of sonication bathing. Therefore, a suitable Cu-assisted texturization technique was found, which could enable lowering the photo-reflectance below 1% without any antireflection coating. △ Less

Submitted 13 July, 2019; originally announced July 2019.

Comments: 5 pages, 7 figures

MSC Class: Applied Physics

Journal ref: AIP Advances 9, 075118 (2019)

Novel high efficiency quadruple junction solar cell with current matching and quantum efficiency simulations

Authors: Mohammad Jobayer Hossain, Bibek Tiwari, Indranil Bhattacharya

Abstract: A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic bandgap of these materials are 1.9 eV, 1.42 eV, 1.08 eV and 0.55 eV respectively. This unique arrangement enables the cell absorb photons from ultraviolet to deep in… ▽ More A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic bandgap of these materials are 1.9 eV, 1.42 eV, 1.08 eV and 0.55 eV respectively. This unique arrangement enables the cell absorb photons from ultraviolet to deep infrared wavelengths of the sunlight. Emitter and base thicknesses of the subcells and do** levels of the materials were optimized to maintain the same current in all the four junctions and to obtain the highest conversion efficiency. The short-circuit current density, open circuit voltage and fill factor of the solar cell are 14.7 mA/cm2, 3.38 V and 0.96 respectively. In our design, we considered 1 sun, AM 1.5 global solar spectrum. △ Less

Submitted 23 March, 2019; originally announced May 2019.

Comments: 11 pages, journal paper which introduces a multijunction solar cell achieving 47.2% efficiency

Journal ref: Solar Energy, Volume 139, 1 December 2016, Pages 100-107