-
High-dimensional maximum-entropy phase space tomography using normalizing flows
Authors:
Austin Hoover,
Jonathan C. Wong
Abstract:
Particle accelerators generate charged particle beams with tailored distributions in six-dimensional (6D) position-momentum space (phase space). Knowledge of the phase space distribution enables model-based beam optimization and control. In the absence of direct measurements, the distribution must be tomographically reconstructed from its projections. In this paper, we highlight that such problems…
▽ More
Particle accelerators generate charged particle beams with tailored distributions in six-dimensional (6D) position-momentum space (phase space). Knowledge of the phase space distribution enables model-based beam optimization and control. In the absence of direct measurements, the distribution must be tomographically reconstructed from its projections. In this paper, we highlight that such problems can be severely underdetermined and that entropy maximization is the most conservative solution strategy. We leverage normalizing flows -- invertible generative models -- to extend maximum-entropy tomography to 6D phase space and perform numerical experiments to validate the model performance. Our numerical experiments demonstrate that flow-based entropy estimates are consistent with 2D maximum-entropy solutions and that normalizing flows can fit complex 6D phase space distributions to large measurement sets in reasonable time.
△ Less
Submitted 7 June, 2024; v1 submitted 31 May, 2024;
originally announced June 2024.
-
The impact of high-dimensional phase space correlations on the beam dynamics in a linear accelerator
Authors:
A. Hoover,
K. Ruisard,
A. Aleksandrov,
A. Zhukov,
S. Cousineau,
A. Shishlo
Abstract:
Hadron beams develop intensity-dependent transverse-longitudinal correlations within radio-frequency quadrupole (RFQ) accelerating structures. These correlations are only visible in six-dimensional phase space and are destroyed by reconstructions from low-dimensional projections. In this work, we estimate the effect of artificial decorrelation on the beam dynamics in the Spallation Neutron Source…
▽ More
Hadron beams develop intensity-dependent transverse-longitudinal correlations within radio-frequency quadrupole (RFQ) accelerating structures. These correlations are only visible in six-dimensional phase space and are destroyed by reconstructions from low-dimensional projections. In this work, we estimate the effect of artificial decorrelation on the beam dynamics in the Spallation Neutron Source (SNS) linac and Beam Test Facility (BTF). We show that the evolution of a realistic initial distribution and its decorrelated twin converge during the early acceleration stages; thus, low-dimensional projections are probably sufficient for detailed predictions in high-power linacs.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Analysis of a hadron beam in five-dimensional phase space
Authors:
Austin Hoover,
Kiersten Ruisard,
Alexander Aleksandrov,
Sarah Cousineau,
Alexander Zhukov
Abstract:
We conduct a detailed measurement and analysis of a hadron beam in five-dimensional phase space at the Spallation Neutron Source Beam Test Facility. The measurement's resolution and dynamic range are sufficient to image sharp, high-dimensional features in low-density regions of phase space. To facilitate the complex task of feature identification in the five-dimensional phase space, we develop sev…
▽ More
We conduct a detailed measurement and analysis of a hadron beam in five-dimensional phase space at the Spallation Neutron Source Beam Test Facility. The measurement's resolution and dynamic range are sufficient to image sharp, high-dimensional features in low-density regions of phase space. To facilitate the complex task of feature identification in the five-dimensional phase space, we develop several analysis and visualization techniques, including non-planar slicing. We use these techniques to examine the transverse dependence of longitudinal hollowing and longitudinal dependence of transverse hollowing in the distribution. This analysis strengthens the claim that low-dimensional projections do not adequately characterize high-dimensional phase space distributions in low-energy hadron accelerators
△ Less
Submitted 19 April, 2023; v1 submitted 10 January, 2023;
originally announced January 2023.
-
Measurements of the five-dimensional phase space distribution of an intense ion beam
Authors:
Austin Hoover,
Kiersten Ruisard,
Alexander Aleksandrov,
Alexander Zhukov,
Sarah Cousineau
Abstract:
No simulation of intense beam transport has accurately reproduced measurements at the level of beam halo. One potential explanation of this discrepancy is a lack of knowledge of the initial distribution of particles in six-dimensional (6D)~phase space. A direct 6D measurement of an ion beam was recently performed at the Spallation Neutron Source (SNS) Beam Test Facility (BTF), revealing nonlinear…
▽ More
No simulation of intense beam transport has accurately reproduced measurements at the level of beam halo. One potential explanation of this discrepancy is a lack of knowledge of the initial distribution of particles in six-dimensional (6D)~phase space. A direct 6D measurement of an ion beam was recently performed at the Spallation Neutron Source (SNS) Beam Test Facility (BTF), revealing nonlinear transverse-longitudinal correlations in the beam core that affect downstream evolution. Unfortunately, direct 6D~measurements are limited in resolution and dynamic range; here, we discuss the use of three slits and one screen to measure a 5D projection of the 6D phase space distribution, overcoming these limitations at the cost of one dimension. We examine the measured 5D distribution before and after transport through the BTF and compare to particle-in-cell simulations. We also discuss the possibility of reconstructing the 6D distribution from 5D and 4D projections.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Four-dimensional emittance measurement at the Spallation Neutron Source
Authors:
A. Hoover,
N. E. Evans
Abstract:
A coasting hadron beam with an elliptical transverse profile, uniform charge density, and small transverse four-dimensional (4D) emittance could improve accelerator performance in several contexts. A phase space painting method to generate such a distribution is being tested in the Spallation Neutron Source (SNS) accumulator ring. A critical component of these efforts is to measure the 4D emittanc…
▽ More
A coasting hadron beam with an elliptical transverse profile, uniform charge density, and small transverse four-dimensional (4D) emittance could improve accelerator performance in several contexts. A phase space painting method to generate such a distribution is being tested in the Spallation Neutron Source (SNS) accumulator ring. A critical component of these efforts is to measure the 4D emittance of the beam during accumulation. The 4D emittance can be reconstructed from measured beam profiles in two ways: in the multi-optics method, the optics between a reconstruction and measurement location are varied; in the fixed-optics method, multiple measurement locations are used without modifying the optics. The fixed-optics method is faster but can lead to large uncertainty in the reconstructed 4D emittance. In this paper, we implement a variant of the multi-optics method using the four available wire-scanners near the SNS target. We also modify the wire-scanner region to reduce the uncertainty of the fixed-optics method. We then demonstrate the usefulness of the fixed-optics method by reconstructing the 4D emittance evolution during accumulation in the SNS ring.
△ Less
Submitted 24 July, 2022; v1 submitted 18 April, 2022;
originally announced April 2022.
-
First Measurements of Nuclear Detonation Debris with Decay Energy Spectroscopy
Authors:
Mark P. Croce,
Katrina E. Koehler,
Veronika Mocko,
Andrew S. Hoover,
Stosh A. Kozimor,
Daniel R. Schmidt,
Joel N. Ullom
Abstract:
We report the first isotopic composition measurements of trinitite, nuclear detonation debris from the Trinity test, using the novel forensics technique of decay energy spectroscopy (DES). DES measures the unique total decay energy (Q value) of each alpha-decaying isotope in a small radioactive sample embedded in a microcalorimeter detector. We find that DES can measure the major alpha-decaying is…
▽ More
We report the first isotopic composition measurements of trinitite, nuclear detonation debris from the Trinity test, using the novel forensics technique of decay energy spectroscopy (DES). DES measures the unique total decay energy (Q value) of each alpha-decaying isotope in a small radioactive sample embedded in a microcalorimeter detector. We find that DES can measure the major alpha-decaying isotopes in small particles of trinitite with no dissolution or chemical processing. These first measurements demonstrate the potential of DES to provide a radiometric isotopic characterization method with sensitivity and precision to complement traditional forensics techniques.
△ Less
Submitted 22 March, 2021;
originally announced March 2021.
-
Gamma and Decay Energy Spectroscopy Measurements of Trinitite
Authors:
D. J. Mercer,
K. E. Koehler,
M. P. Croce,
A. S. Hoover,
P. A. Hypes,
S. A. Kozimor,
V. Mocko,
P. R. J. Saey
Abstract:
We report gamma ray spectroscopy measurements of trinitite samples and analogous samples obtained from detonation sites in Nevada and Semipalatinsk, as well as in situ measurements of topsoil at the Trinity site. We also report the first isotopic composition measurements of trinitite using the novel forensics technique of decay energy spectroscopy (DES) as a complement to traditional forensics tec…
▽ More
We report gamma ray spectroscopy measurements of trinitite samples and analogous samples obtained from detonation sites in Nevada and Semipalatinsk, as well as in situ measurements of topsoil at the Trinity site. We also report the first isotopic composition measurements of trinitite using the novel forensics technique of decay energy spectroscopy (DES) as a complement to traditional forensics techniques. Our measurements are compared to other published results.
△ Less
Submitted 22 April, 2021; v1 submitted 10 March, 2021;
originally announced March 2021.
-
Determining Ionizing Doses in Medium Earth Orbits Using Long-Term GPS Particle Measurements
Authors:
Yue Chen,
Matthew R. Carver,
Steven K. Morley,
Andrew S. Hoover
Abstract:
We use long-term electron and proton in-situ measurements made by the CXD particle instruments, developed by Los Alamos National Laboratory and carried on board GPS satellites, to determine total ionizing dose (TID) values and daily/yearly dose rate (DR) values in medium Earth orbits (MEOs) caused by the natural space radiation environment. Here measurement-based TID and DR values on a simplified…
▽ More
We use long-term electron and proton in-situ measurements made by the CXD particle instruments, developed by Los Alamos National Laboratory and carried on board GPS satellites, to determine total ionizing dose (TID) values and daily/yearly dose rate (DR) values in medium Earth orbits (MEOs) caused by the natural space radiation environment. Here measurement-based TID and DR values on a simplified sample geometry--a small (with a radius of 0.1 mm) Silicon detector within an Aluminum shielding sphere with a thickness of 100 mil--are compared to those calculated from empirical radiation models. Results over the solar cycle 24 show that electron TID from measurements in GPS orbit is well above the values calculated from the median/mean fluences from AE8 and AE9 models, but close to model fluences at high percentiles. Also, it is confirmed that in MEOs proton contributions to TID are minor and mainly dominated by solar energetic protons. Several factors affecting those dose calculations are discussed and evaluated. Results from this study provide us another out-of-sample test on the reliability of existing empirical space radiation models, and also help estimate the margin factors on calculated dose values in MEOs that pass through the heart of the Earth's outer radiation belt.
△ Less
Submitted 30 November, 2020;
originally announced December 2020.
-
Great SCO2T! Rapid tool for carbon sequestration science, engineering, and economics
Authors:
Richard S. Middleton,
Jeffrey M. Bielicki,
Bailian Chen,
Andres F. Clarens,
Robert P. Currier,
Kevin M. Ellett,
Dylan R. Harp,
Brendan A. Hoover,
Ryan M. Kammer,
Dane N. McFarlane,
Jonathan D. Ogland-Hand,
Rajesh J. Pawar,
Philip H. Stauffer,
Hari S. Viswanathan,
Sean P. Yaw
Abstract:
CO2 capture and storage (CCS) technology is likely to be widely deployed in coming decades in response to major climate and economics drivers: CCS is part of every clean energy pathway that limits global warming to 2C or less and receives significant CO2 tax credits in the United States. These drivers are likely to stimulate capture, transport, and storage of hundreds of millions or billions of to…
▽ More
CO2 capture and storage (CCS) technology is likely to be widely deployed in coming decades in response to major climate and economics drivers: CCS is part of every clean energy pathway that limits global warming to 2C or less and receives significant CO2 tax credits in the United States. These drivers are likely to stimulate capture, transport, and storage of hundreds of millions or billions of tonnes of CO2 annually. A key part of the CCS puzzle will be identifying and characterizing suitable storage sites for vast amounts of CO2. We introduce a new software tool called SCO2T (Sequestration of CO2 Tool, pronounced "Scott") to rapidly characterizing saline storage reservoirs. The tool is designed to rapidly screen hundreds of thousands of reservoirs, perform sensitivity and uncertainty analyses, and link sequestration engineering (injection rates, reservoir capacities, plume dimensions) to sequestration economics (costs constructed from around 70 separate economic inputs). We describe the novel science developments supporting SCO2T including a new approach to estimating CO2 injection rates and CO2 plume dimensions as well as key advances linking sequestration engineering with economics. Next, we perform a sensitivity and uncertainty analysis of geology combinations (including formation depth, thickness, permeability, porosity, and temperature) to understand the impact on carbon sequestration. Through the sensitivity analysis we show that increasing depth and permeability both can lead to increased CO2 injection rates, increased storage potential, and reduced costs, while increasing porosity reduces costs without impacting the injection rate (CO2 is injected at a constant pressure in all cases) by increasing the reservoir capacity.
△ Less
Submitted 27 May, 2020;
originally announced May 2020.
-
Development of holmium-163 electron-capture spectroscopy with transition-edge sensors
Authors:
M. P. Croce,
M. W. Rabin,
V. Mocko,
G. J. Kunde,
E. R. Birnbaum,
E. M. Bond,
J. W. Engle,
A. S. Hoover,
F. M. Nortier,
A. D. Pollington,
W. A. Taylor,
N. R. Weisse-Bernstein,
L. E. Wolfsberg,
J. P. Hays-Wehle,
D. R. Schmidt,
D. S. Swetz,
J. N. Ullom,
T. E. Barnhart,
R. J. Nickles
Abstract:
Calorimetric decay energy spectroscopy of electron-capture-decaying isotopes is a promising method to achieve the sensitivity required for electron neutrino mass measurement. The very low total nuclear decay energy (QEC < 3 keV) and short half-life (4570 y) of 163Ho make it attractive for high-precision electron capture spectroscopy (ECS) near the kinematic endpoint, where the neutrino momentum go…
▽ More
Calorimetric decay energy spectroscopy of electron-capture-decaying isotopes is a promising method to achieve the sensitivity required for electron neutrino mass measurement. The very low total nuclear decay energy (QEC < 3 keV) and short half-life (4570 y) of 163Ho make it attractive for high-precision electron capture spectroscopy (ECS) near the kinematic endpoint, where the neutrino momentum goes to zero. In the ECS approach, an electron-capture-decaying isotope is embedded inside a microcalorimeter designed to capture and measure the energy of all the decay radiation except that of the esca** neutrino. We have developed a complete process for proton-irradiation-based isotope production, isolation, and purification of 163Ho. We have developed transition-edge sensors for this measurement and methods for incorporating 163Ho into high-resolution microcalorimeters, and have measured the electron-capture spectrum of 163Ho. We present our work in these areas and discuss the measured spectrum and its comparison to current theory.
△ Less
Submitted 20 October, 2015; v1 submitted 13 October, 2015;
originally announced October 2015.
-
Filters for High Rate Pulse Processing
Authors:
B. K. Alpert,
R. D. Horansky,
D. A. Bennett,
W. B. Doriese,
J. W. Fowler,
A. S. Hoover,
M. W. Rabin,
J. N. Ullom
Abstract:
We introduce a filter-construction method for pulse processing that differs in two respects from that in standard optimal filtering, in which the average pulse shape and noise-power spectral density are combined to create a convolution filter for estimating pulse heights. First, the proposed filters are computed in the time domain, to avoid periodicity artifacts of the discrete Fourier transform,…
▽ More
We introduce a filter-construction method for pulse processing that differs in two respects from that in standard optimal filtering, in which the average pulse shape and noise-power spectral density are combined to create a convolution filter for estimating pulse heights. First, the proposed filters are computed in the time domain, to avoid periodicity artifacts of the discrete Fourier transform, and second, orthogonality constraints are imposed on the filters, to reduce the filtering procedure's sensitivity to unknown baseline height and pulse tails. We analyze the proposed filters, predicting energy resolution under several scenarios, and apply the filters to high-rate pulse data from gamma-rays measured by a transition-edge-sensor microcalorimeter.
△ Less
Submitted 7 December, 2012;
originally announced December 2012.