-
Attoliter Mie Void Sensing
Authors:
Serkan Arslan,
Micha Kappel,
Adrià Canós Valero,
Thu Huong T. Tran,
Julian Karst,
Philipp Christ,
Ulrich Hohenester,
Thomas Weiss,
Harald Giessen,
Mario Hentschel
Abstract:
Traditional nanophotonic sensing schemes utilize evanescent fields in dielectric or metallic nanoparticles, which confine far-field radiation in dispersive and lossy media. Apart from the lack of a well-defined sensing volume that can be accompanied by moderate sensitivities, these structures suffer from the generally limited access to the modal field, which is key for sensing performance. Recentl…
▽ More
Traditional nanophotonic sensing schemes utilize evanescent fields in dielectric or metallic nanoparticles, which confine far-field radiation in dispersive and lossy media. Apart from the lack of a well-defined sensing volume that can be accompanied by moderate sensitivities, these structures suffer from the generally limited access to the modal field, which is key for sensing performance. Recently, a novel strategy for dielectric nanophotonics has been demonstrated, namely, the resonant confinement of light in air. So-called Mie voids created in high-index dielectric host materials support localized resonant modes with exceptional properties. In particular, due to the confinement in air, these structures benefit from the full access to the modal field inside the void. We utilize these Mie voids for refractive index sensing in single voids with volumes down to 100 attoliters and sensitivities on the order of 400 nm per refractive index unit. Taking the signal-to-noise ratio of our measurements into account, we demonstrate detection of refractive index changes as small as 6.9 x 10-4 in a defined volume of just 850 attoliters. The combination of our Mie void sensor platform with appropriate surface functionalization will even enable specificity to biological or other analytes of interest, as the sensing volumes are on the order of cellular signaling chemicals of single vesicles in cellular synapses.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Unified simulation platform for interference microscopy
Authors:
Felix Hitzelhammer,
Anežka Dostálová,
Ilia Zykov,
Barbara Platzer,
Clara Conrad-Billroth,
Thomas Juffmann,
Ulrich Hohenester
Abstract:
Interferometric scattering microscopy is a powerful technique that enables various applications, such as mass photometry and particle tracking. Here we present a numerical toolbox to simulate images obtained in interferometric scattering, coherent bright-field, and dark-field microscopy. The scattered fields are calculated using a boundary element method, facilitating the simulation of arbitrary s…
▽ More
Interferometric scattering microscopy is a powerful technique that enables various applications, such as mass photometry and particle tracking. Here we present a numerical toolbox to simulate images obtained in interferometric scattering, coherent bright-field, and dark-field microscopy. The scattered fields are calculated using a boundary element method, facilitating the simulation of arbitrary sample geometries and substrate layer structures. A fully vectorial model is used for simulating the imaging setup. We demonstrate excellent agreement between our simulations and experiments for different shapes of scatterers and excitation angles. Notably, for angles near the Brewster angle, we observe a contrast enhancement which may be beneficial for nanosensing applications. The software is available as a Matlab toolbox.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Optofluidic Force Induction as a Process Analytical Technology
Authors:
Marko Šimić,
Christian Neuper,
Ulrich Hohenester,
Christian Hill
Abstract:
Manufacturers of nanoparticle-based products rely on detailed information about critical process parameters, such as particle size and size distributions, concentration, and material composition, which directly reflect the quality of the final product. These process parameters are often obtained using offline characterization techniques that cannot provide the temporal resolution to detect dynamic…
▽ More
Manufacturers of nanoparticle-based products rely on detailed information about critical process parameters, such as particle size and size distributions, concentration, and material composition, which directly reflect the quality of the final product. These process parameters are often obtained using offline characterization techniques that cannot provide the temporal resolution to detect dynamic changes in particle ensembles during a production process. To overcome this deficiency, we have recently introduced Optofluidic Force Induction (OF2i) for optical real-time counting with single particle sensitivity and high throughput. In this paper, we apply OF2i to highly polydisperse and multi modal particle systems, where we also monitor evolutionary processes over large time scales. For oil-in-water emulsions we detect in real time the transition between high-pressure homogenization states. For silicon carbide nanoparticles, we exploit the dynamic OF2i measurement capabilities to introduce a novel process feedback parameter based on the dissociation of particle agglomerates. Our results demonstrate that OF2i provides a versatile workbench for process feedback in a wide range of applications.
△ Less
Submitted 26 June, 2023;
originally announced July 2023.
-
Theoretical description of optofluidic force induction
Authors:
Marko Šimić,
Christian Hill,
Ulrich Hohenester
Abstract:
Optofluidic force induction (OF2i) is an optical nanoparticle characterization scheme which achieves real-time optical counting with single-particle sensitivity and high throughput. In a recent paper [Šimić et al., Phys. Rev. Appl. 18, 024056 (2022)], we have demonstrated the working principle for standardized polystrene nanoparticles, and have developed a theoretical model to analyze the experime…
▽ More
Optofluidic force induction (OF2i) is an optical nanoparticle characterization scheme which achieves real-time optical counting with single-particle sensitivity and high throughput. In a recent paper [Šimić et al., Phys. Rev. Appl. 18, 024056 (2022)], we have demonstrated the working principle for standardized polystrene nanoparticles, and have developed a theoretical model to analyze the experimental data. In this paper we give a detailed account of the model ingredients including the full working equations, provide additional justification for the assumptions underlying OF2i, and discuss directions for further developments and future research.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Tomographic reconstruction of quasistatic surface polariton fields
Authors:
Raphael Hauer,
Georg Haberfehlner,
Gerald Kothleitner,
Mathieu Kociak,
Ulrich Hohenester
Abstract:
We theoretically investigate the tomographic reconstruction of the three-dimensional photonic environment of nanoparticles. As input for our reconstruction we use electron energy loss spectroscopy (EELS) maps for different rotation angles. We perform the tomographic reconstruction of surface polariton fields for smooth and rough nanorods, and compare the reconstructed and simulated photonic local…
▽ More
We theoretically investigate the tomographic reconstruction of the three-dimensional photonic environment of nanoparticles. As input for our reconstruction we use electron energy loss spectroscopy (EELS) maps for different rotation angles. We perform the tomographic reconstruction of surface polariton fields for smooth and rough nanorods, and compare the reconstructed and simulated photonic local density of states, which are shown to be in very good agreement. Using these results, we critically examine the potential of our tomography scheme, and discuss limitations and directions for future developments.
△ Less
Submitted 30 November, 2022;
originally announced November 2022.
-
Real-time nanoparticle characterization through opto-fluidic force induction
Authors:
Marko Šimić,
Doris Auer,
Christian Neuper,
Nikola Šimić,
Gerhard Prossliner,
Ruth Prassl,
Christian Hill,
Ulrich Hohenester
Abstract:
We propose and demonstrate a novel scheme for optical nanoparticle characterization, optofluidic force induction (OF2i), which achieves real-time optical counting with single-particle sensitivity, high throughput, and for particle sizes ranging from tens of nanometers to several $μ$m. The particles to be analyzed flow through a microfluidic channel alongside a weakly focused laser vortex beam, whi…
▽ More
We propose and demonstrate a novel scheme for optical nanoparticle characterization, optofluidic force induction (OF2i), which achieves real-time optical counting with single-particle sensitivity, high throughput, and for particle sizes ranging from tens of nanometers to several $μ$m. The particles to be analyzed flow through a microfluidic channel alongside a weakly focused laser vortex beam, which accomplishes 2D trap** of the particles in the transverse directions and size-dependent velocity changes due to the optical forces in the longitudinal direction. Upon monitoring the trajectories and velocity changes of each individually tracked particle, we obtain detailed information about the number based particle size distribution. A parameter-free model based on Maxwell's equations and Mie theory is shown to provide very good agreement with the experimental results for standardized particles of spherical shape. Our results prove that OF2i can provide a flexible work bench for numerous pharmaceutical and technological applications, as well as for medical diagnostics.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Nanophotonic resonance modes with the nanobem toolbox
Authors:
Ulrich Hohenester,
Nikita Reichelt,
Gerhard Unger
Abstract:
Nanobem is a Matlab toolbox for the solution of Maxwell's equations for nanophotonic systems and the computation of resonance modes, sometimes also referred to as quasinormal modes or resonance states. It is based on a Galerkin scheme for the boundary element method, using Raviart-Thomas shape elements for the representation of the tangential electromagnetic fields at the particle boundary. The to…
▽ More
Nanobem is a Matlab toolbox for the solution of Maxwell's equations for nanophotonic systems and the computation of resonance modes, sometimes also referred to as quasinormal modes or resonance states. It is based on a Galerkin scheme for the boundary element method, using Raviart-Thomas shape elements for the representation of the tangential electromagnetic fields at the particle boundary. The toolbox is written in an object-oriented manner with the focus on clarity rather than speed, and has been developed and tested for small to intermediate problems with a few thousand boundary elements. The computation of the resonance modes uses the contour integral method of Beyn.
△ Less
Submitted 7 March, 2022;
originally announced March 2022.
-
Three dimensional vectorial imaging of surface phonons
Authors:
Xiaoyan Li,
Georg Haberfehlner,
Ulrich Hohenester,
Odile Stéphan,
Gerald Kothleitner,
Mathieu Kociak
Abstract:
While phonons and their related properties have been studied comprehensively in bulk materials, a thorough understanding of surface phonons for nanoscale objects remains elusive. Infra-red imaging methods with photons or electrons exist, which can map these vibrational excitations down to the individual atom scale. However, no technique so far was able to directly reveal the complete three-dimensi…
▽ More
While phonons and their related properties have been studied comprehensively in bulk materials, a thorough understanding of surface phonons for nanoscale objects remains elusive. Infra-red imaging methods with photons or electrons exist, which can map these vibrational excitations down to the individual atom scale. However, no technique so far was able to directly reveal the complete three-dimensional vectorial picture of the phononic electromagnetic density of states from a nanostructured object. Using a highly monochromated electron beam in a scanning transmission electron microscope, we could visualize varying phonon signatures from nanoscale MgO cubes both as a function of the beam position, energy-loss and tilt angle. The vibrational responses were described in terms of well-defined eigenmodes and were used to tomographically reconstruct the phononic surface fields of the object, disclosing effects invisible by conventional map**. Surface phonon applications rely critically on the way the electromagnetic field is spatially and vectorially shaped, strongly influencing the optical, thermal and electronic behavior of the materials. Such 3D information therefore promises novel insights in nanoscale physical phenomena and is invaluable to the design and optimization of nanostructures for fascinating new uses.
△ Less
Submitted 18 December, 2020; v1 submitted 21 November, 2020;
originally announced November 2020.
-
Orbital angular momentum and energy loss characterization of plasmonic excitations in metallic nanostructures in TEM
Authors:
Matteo Zanfrognini,
Enzo Rotunno,
Stefano Frabboni,
Alicia Sit,
Ebrahim Karimi,
Ulrich Hohenester,
Vincenzo Grillo
Abstract:
Recently, a new device to measure the Orbital Angular Momentum (OAM) electronic spectrum after elastic/inelastic scattering in a transmission electron microscope has been introduced. We modified the theoretical framework needed to describe conventional low loss electron energy loss spectroscopy (EELS) experiments in transmission electron microscopes (TEM) to study surface plasmons in metallic nano…
▽ More
Recently, a new device to measure the Orbital Angular Momentum (OAM) electronic spectrum after elastic/inelastic scattering in a transmission electron microscope has been introduced. We modified the theoretical framework needed to describe conventional low loss electron energy loss spectroscopy (EELS) experiments in transmission electron microscopes (TEM) to study surface plasmons in metallic nanostructures, to allow for an OAM post selection and devise new experiments for the analysis of these excitations in nanostructures. We found that unprecedented information on the symmetries and on the chirality of the plasmonic modes can be retrieved even with limited OAM and energy resolutions.
△ Less
Submitted 27 May, 2020; v1 submitted 26 November, 2018;
originally announced November 2018.
-
Influence of surface roughness on the optical properties of plasmonic nanoparticles
Authors:
Andreas Truegler,
Jean-Claude Tinguely,
Joachim R. Krenn,
Andreas Hohenau,
Ulrich Hohenester
Abstract:
For plasmonic nanoparticles, we investigate the influence of surface roughness inherent to top-down fabrication on the optical properties, and find that it has a surprisingly small influence on the position and width of the plasmon peaks. Our experimental observation is supported by simulations based on the boundary element method approach. Using a perturbation approach, suitable for metallic nano…
▽ More
For plasmonic nanoparticles, we investigate the influence of surface roughness inherent to top-down fabrication on the optical properties, and find that it has a surprisingly small influence on the position and width of the plasmon peaks. Our experimental observation is supported by simulations based on the boundary element method approach. Using a perturbation approach, suitable for metallic nanoparticles with a moderate degree of surface roughness, we demonstrate that the reason for this lies in motional narrowing where the plasmon averages over the random height fluctuations. Surface roughness in large arrays of identical nanoparticles, such as encountered in the context of metamaterials, is thus expected to not constitute a major roadblock.
△ Less
Submitted 24 September, 2012;
originally announced September 2012.