Showing 1–14 of 14 results for author: Hersam, M C

Formation and Microwave Losses of Hydrides in Superconducting Niobium Thin Films Resulting from Fluoride Chemical Processing

Authors: Carlos G. Torres-Castanedo, Dominic P. Goronzy, Thang Pham, Anthony McFadden, Nicholas Materise, Paul Masih Das, Matthew Cheng, Dmitry Lebedev, Stephanie M. Ribet, Mitchell J. Walker, David A. Garcia-Wetten, Cameron J. Kopas, Jayss Marshall, Ella Lachman, Nikolay Zhelev, James A. Sauls, Joshua Y. Mutus, Corey Rae H. McRae, Vinayak P. Dravid, Michael J. Bedzyk, Mark C. Hersam

Abstract: Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potenti… ▽ More Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potentially negatively impacting microwave loss performance. Here, we present comprehensive materials characterization of Nb hydrides formed in Nb thin films as a function of fluoride chemical treatments. In particular, secondary-ion mass spectrometry, X-ray scattering, and transmission electron microscopy reveal the spatial distribution and phase transformation of Nb hydrides. The rate of hydride formation is determined by the fluoride solution acidity and the etch rate of Nb2O5, which acts as a diffusion barrier for hydrogen into Nb. The resulting Nb hydrides are detrimental to Nb superconducting properties and lead to increased power-independent microwave loss in coplanar waveguide resonators. However, Nb hydrides do not correlate with two-level system loss or device aging mechanisms. Overall, this work provides insight into the formation of Nb hydrides and their role in microwave loss, thus guiding ongoing efforts to maximize coherence time in superconducting quantum devices. △ Less

Submitted 5 April, 2024; originally announced April 2024.

All-antiferromagnetic electrically controlled memory on silicon featuring large tunneling magnetoresistance

Authors: Jiacheng Shi, Victor Lopez-Dominguez, Sevdenur Arpaci, Vinod K. Sangwan, Farzad Mahfouzi, **woong Kim, Jordan G. Athas, Mohammad Hamdi, Can Aygen, Charudatta Phatak, Mario Carpentieri, Jidong S. Jiang, Matthew A. Grayson, Nicholas Kioussis, Giovanni Finocchio, Mark C. Hersam, Pedram Khalili Amiri

Abstract: Antiferromagnetic (AFM) materials are a pathway to spintronic memory and computing devices with unprecedented speed, energy efficiency, and bit density. Realizing this potential requires AFM devices with simultaneous electrical writing and reading of information, which are also compatible with established silicon-based manufacturing. Recent experiments have shown tunneling magnetoresistance (TMR)… ▽ More Antiferromagnetic (AFM) materials are a pathway to spintronic memory and computing devices with unprecedented speed, energy efficiency, and bit density. Realizing this potential requires AFM devices with simultaneous electrical writing and reading of information, which are also compatible with established silicon-based manufacturing. Recent experiments have shown tunneling magnetoresistance (TMR) readout in epitaxial AFM tunnel junctions. However, these TMR structures were not grown using a silicon-compatible deposition process, and controlling their AFM order required external magnetic fields. Here we show three-terminal AFM tunnel junctions based on the noncollinear antiferromagnet PtMn3, sputter-deposited on silicon. The devices simultaneously exhibit electrical switching using electric currents, and electrical readout by a large room-temperature TMR effect. First-principles calculations explain the TMR in terms of the momentum-resolved spin-dependent tunneling conduction in tunnel junctions with noncollinear AFM electrodes. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Roadmap for Unconventional Computing with Nanotechnology

Authors: Giovanni Finocchio, Jean Anne C. Incorvia, Joseph S. Friedman, Qu Yang, Anna Giordano, Julie Grollier, Hyunsoo Yang, Florin Ciubotaru, Andrii Chumak, Azad J. Naeemi, Sorin D. Cotofana, Riccardo Tomasello, Christos Panagopoulos, Mario Carpentieri, Peng Lin, Gang Pan, J. Joshua Yang, Aida Todri-Sanial, Gabriele Boschetto, Kremena Makasheva, Vinod K. Sangwan, Amit Ranjan Trivedi, Mark C. Hersam, Kerem Y. Camsari, Peter L. McMahon , et al. (26 additional authors not shown)

Abstract: In the "Beyond Moore's Law" era, with increasing edge intelligence, domain-specific computing embracing unconventional approaches will become increasingly prevalent. At the same time, adopting a variety of nanotechnologies will offer benefits in energy cost, computational speed, reduced footprint, cyber resilience, and processing power. The time is ripe for a roadmap for unconventional computing w… ▽ More In the "Beyond Moore's Law" era, with increasing edge intelligence, domain-specific computing embracing unconventional approaches will become increasingly prevalent. At the same time, adopting a variety of nanotechnologies will offer benefits in energy cost, computational speed, reduced footprint, cyber resilience, and processing power. The time is ripe for a roadmap for unconventional computing with nanotechnologies to guide future research, and this collection aims to fill that need. The authors provide a comprehensive roadmap for neuromorphic computing using electron spins, memristive devices, two-dimensional nanomaterials, nanomagnets, and various dynamical systems. They also address other paradigms such as Ising machines, Bayesian inference engines, probabilistic computing with p-bits, processing in memory, quantum memories and algorithms, computing with skyrmions and spin waves, and brain-inspired computing for incremental learning and problem-solving in severely resource-constrained environments. These approaches have advantages over traditional Boolean computing based on von Neumann architecture. As the computational requirements for artificial intelligence grow 50 times faster than Moore's Law for electronics, more unconventional approaches to computing and signal processing will appear on the horizon, and this roadmap will help identify future needs and challenges. In a very fertile field, experts in the field aim to present some of the dominant and most promising technologies for unconventional computing that will be around for some time to come. Within a holistic approach, the goal is to provide pathways for solidifying the field and guiding future impactful discoveries. △ Less

Submitted 27 February, 2024; v1 submitted 17 January, 2023; originally announced January 2023.

Comments: 80 pages accepted in Nano Futures

Journal ref: Nano Futures (2024)

Observation of current-induced switching in non-collinear antiferromagnetic IrMn$_3$ by differential voltage measurements

Authors: Sevdenur Arpaci, Victor Lopez-Dominguez, Jiacheng Shi, Luis Sánchez-Tejerina, Francesca Garesci, Chulin Wang, Xueting Yan, Vinod K. Sangwan, Matthew Grayson, Mark C. Hersam, Giovanni Finocchio, Pedram Khalili Amiri

Abstract: There is accelerating interest in develo** memory devices using antiferromagnetic (AFM) materials, motivated by the possibility for electrically controlling AFM order via spin-orbit torques, and its read-out via magnetoresistive effects. Recent studies have shown, however, that high current densities create non-magnetic contributions to resistive switching signals in AFM/heavy metal (AFM/HM) bil… ▽ More There is accelerating interest in develo** memory devices using antiferromagnetic (AFM) materials, motivated by the possibility for electrically controlling AFM order via spin-orbit torques, and its read-out via magnetoresistive effects. Recent studies have shown, however, that high current densities create non-magnetic contributions to resistive switching signals in AFM/heavy metal (AFM/HM) bilayers, complicating their interpretation. Here we introduce an experimental protocol to unambiguously distinguish current-induced magnetic and nonmagnetic switching signals in AFM/HM structures, and demonstrate it in IrMn$_3$/Pt devices. A six-terminal double-cross device is constructed, with an IrMn$_3$ pillar placed on one cross. The differential voltage is measured between the two crosses with and without IrMn$_3$ after each switching attempt. For a wide range of current densities, reversible switching is observed only when write currents pass through the cross with the IrMn$_3$ pillar, eliminating any possibility of non-magnetic switching artifacts. Micromagnetic simulations support our findings, indicating a complex domain-mediated switching process. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Nanoscale probing of image-potential states and electron transfer do** in borophene polymorphs

Authors: Xiaolong Liu, Luqing Wang, Boris I. Yakobson, Mark C. Hersam

Abstract: Using field-emission resonance spectroscopy with an ultrahigh vacuum scanning tunneling microscope, we reveal Stark-shifted image-potential states of the v_1/6 and v_1/5 borophene polymorphs on Ag(111) with long lifetimes, suggesting high borophene lattice and interface quality. These image-potential states allow the local work function and interfacial charge transfer of borophene to be probed at… ▽ More Using field-emission resonance spectroscopy with an ultrahigh vacuum scanning tunneling microscope, we reveal Stark-shifted image-potential states of the v_1/6 and v_1/5 borophene polymorphs on Ag(111) with long lifetimes, suggesting high borophene lattice and interface quality. These image-potential states allow the local work function and interfacial charge transfer of borophene to be probed at the nanoscale and test the widely employed self-do** model of borophene. Supported by apparent barrier height measurements and density functional theory calculations, electron transfer do** occurs for both borophene phases from the Ag(111) substrate. In contradiction with the self-do** model, a higher electron transfer do** level occurs for denser v_1/6 borophene compared to v_1/5 borophene, thus revealing the importance of substrate effects on borophene electron transfer. △ Less

Submitted 18 November, 2020; originally announced November 2020.

Journal ref: Nano Letters 2021, 21, 1169-1174

Low Frequency Carrier Kinetics in Perovskite Solar Cells

Authors: Vinod K. Sangwan, Menghua Zhu, Sarah Clark, Kyle A. Luck, Tobin J. Marks, Mercouri G. Kanatzidis, Mark C. Hersam

Abstract: Hybrid organic-inorganic halide perovskite solar cells have emerged as leading candidates for third-generation photovoltaic technology. Despite the rapid improvement in power conversion efficiency (PCE) for perovskite solar cells in recent years, the low-frequency carrier kinetics that underlie practical roadblocks such as hysteresis and degradation remain relatively poorly understood. In an effor… ▽ More Hybrid organic-inorganic halide perovskite solar cells have emerged as leading candidates for third-generation photovoltaic technology. Despite the rapid improvement in power conversion efficiency (PCE) for perovskite solar cells in recent years, the low-frequency carrier kinetics that underlie practical roadblocks such as hysteresis and degradation remain relatively poorly understood. In an effort to bridge this knowledge gap, we perform here correlated low-frequency noise (LFN) and impedance spectroscopy (IS) characterization that elucidates carrier kinetics in operating perovskite solar cells. Specifically, we focus on planar cell geometries with a SnO2 electron transport layer and two different hole transport layers, namely, poly(triarylamine) (PTAA) and Spiro-OMeTAD. PTAA and Sprio-OMeTAD cells with moderate PCEs of 5 to 12 percent possess a Lorentzian feature at 200 Hz in LFN measurements that corresponds to a crossover from electrode to dielectric polarization. In comparison, Spiro-OMeTAD cells with high PCEs (15 percent) show four orders of magnitude lower LFN amplitude and are accompanied by a cyclostationary process. Through a systematic study of more than a dozen solar cells, we establish a correlation with noise amplitude, power conversion efficiency, and fill factor. Overall, this work establishes correlated LFN and IS as an effective methodology for quantifying low frequency carrier kinetics in perovskite solar cells, thereby providing new physical insights that can rationally guide ongoing efforts to improve device performance, reproducibility, and stability. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Self-Assembled Photochromic Molecular Dipoles for High Performance Polymer Thin-Film Transistors

Authors: Satyaprasad P. Senanayak, Vinod K. Sangwan, Julian J. McMorrow, Ken Everaerts, Zhihua Chen, Antonio Facchetti, Mark C. Hersam, Tobin J. Marks, K. S. Narayan

Abstract: The development of high-performance multifunctional polymer-based electronic circuits is a major step towards future flexible electronics. Here, we demonstrate a tunable approach to fabricate such devices based on rationally designed dielectric super-lattice structures with photochromic azo-benzene molecules. These nanodielectrics possessing ionic, molecular, and atomic polarization are utilized i… ▽ More The development of high-performance multifunctional polymer-based electronic circuits is a major step towards future flexible electronics. Here, we demonstrate a tunable approach to fabricate such devices based on rationally designed dielectric super-lattice structures with photochromic azo-benzene molecules. These nanodielectrics possessing ionic, molecular, and atomic polarization are utilized in polymer thin-film transistors (TFTs) to realize high performance electronics with p-type field-effect mobility exceeding 2 cm^2/(V.s). A crossover in the transport mechanism from electrostatic dipolar disorder to ionic-induced disorder is observed in the transistor characteristics over a range of temperatures. The facile supramolecular design allows the possibility to optically control the extent of molecular and ionic polarization in the ultra-thin nanodielectric. Thus, we demonstrate a three-fold increase in the capacitance from 0.1 uF/cm^2 to 0.34 uF/cm^2, which results in a 200% increase in TFT channel current. △ Less

Submitted 6 June, 2018; originally announced June 2018.

Charge Separation at Mixed-Dimensional Single and Multilayer MoS2/Silicon Nanowire Heterojunctions

Authors: Alex Henning, Vinod K. Sangwan, Hadallia Bergeron, Itamar Balla, Zhiyuan Sun, Mark C. Hersam, Lincoln J. Lauhon

Abstract: Layered two-dimensional (2-D) semiconductors can be combined with other low-dimensional semiconductors to form non-planar mixed-dimensional van der Waals (vdW) heterojunctions whose charge transport behavior is influenced by the heterojunction geometry, providing a new degree of freedom to engineer device functions. Towards that end, we investigated the photoresponse of Si nanowire/MoS2 heterojunc… ▽ More Layered two-dimensional (2-D) semiconductors can be combined with other low-dimensional semiconductors to form non-planar mixed-dimensional van der Waals (vdW) heterojunctions whose charge transport behavior is influenced by the heterojunction geometry, providing a new degree of freedom to engineer device functions. Towards that end, we investigated the photoresponse of Si nanowire/MoS2 heterojunction diodes with scanning photocurrent microscopy and time-resolved photocurrent measurements. Comparison of n-Si/MoS2 isotype heterojunctions with p-Si/MoS2 heterojunction diodes under varying biases shows that the depletion region in the p-n heterojunction promotes exciton dissociation and carrier collection. We measure an instrument limited response time of 1 us, which is 10 times faster than previously reported response times for planar Si/MoS2 devices, highlighting the advantages of the 1-D/2-D heterojunction. Finite element simulations of device models provide a detailed understanding of how the electrostatics affect charge transport in nanowire/vdW heterojunctions and inform the design of future vdW heterojunction photodetectors and transistors. △ Less

Submitted 24 May, 2018; originally announced May 2018.

Comments: 30 pages, 4 figures

Gate-tunable memristors from monolayer MoS2

Authors: Vinod K. Sangwan, Hong-Sub Lee, Mark C. Hersam

Abstract: We report here gate-tunable memristors based on monolayer MoS2 grown by chemical vapor deposition (CVD). These memristors are fabricated in a field-effect geometry with the channel consisting of polycrystalline MoS2 films with grain sizes of 3-5 um. The device characteristics show switching ratios up to 500, with the resistance in individual states being continuously gate-tunable by over three ord… ▽ More We report here gate-tunable memristors based on monolayer MoS2 grown by chemical vapor deposition (CVD). These memristors are fabricated in a field-effect geometry with the channel consisting of polycrystalline MoS2 films with grain sizes of 3-5 um. The device characteristics show switching ratios up to 500, with the resistance in individual states being continuously gate-tunable by over three orders of magnitude. The resistive switching results from dynamically varying threshold voltage and Schottky barrier heights, whose underlying physical mechanism appears to be vacancy migration and/or charge trap**. Top-gated devices achieve reversible tuning of the threshold voltage, with potential utility in non-volatile memory or neuromorphic architectures. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Graphene-enabled, directed nanomaterial placement from solution for large-scale device integration

Authors: Michael Engel, Damon B. Farmer, Jaione Tirapu Azpiroz, Jung-Woo T. Seo, Joohoon Kang, Phaedon Avouris, Mark C. Hersam, Ralph Krupke, Mathias Steiner

Abstract: Controlled placement of nanomaterials at predefined locations with nanoscale precision remains among the most challenging problems that inhibit their large-scale integration in the field of semiconductor process technology. Methods based on surface functionalization have a drawback where undesired chemical modifications can occur and deteriorate the deposited material. The application of electric-… ▽ More Controlled placement of nanomaterials at predefined locations with nanoscale precision remains among the most challenging problems that inhibit their large-scale integration in the field of semiconductor process technology. Methods based on surface functionalization have a drawback where undesired chemical modifications can occur and deteriorate the deposited material. The application of electric-field assisted placement techniques eliminates the element of chemical treatment; however, it requires an incorporation of conductive placement electrodes that limit the performance, scaling, and density of integrated electronic devices. Here, we report a method for electric-field assisted placement of solution-processed nanomaterials by using large-scale graphene layers featuring nanoscale deposition sites. The structured graphene layers are prepared via either transfer or synthesis on standard substrates, then are removed without residue once nanomaterial deposition is completed, yielding material assemblies with nanoscale resolution that cover surface areas larger than 1mm2. In order to demonstrate the broad applicability, we have assembled representative zero-, one-, and two-dimensional semiconductors at predefined substrate locations and integrated them into nanoelectronic devices. This graphene-based placement technique affords nanoscale resolution at wafer scale, and could enable mass manufacturing of nanoelectronics and optoelectronics involving a wide range of nanomaterials prepared via solution-based approaches. △ Less

Submitted 21 February, 2018; originally announced February 2018.

Comments: 17 pages, 5 figures

Self-Aligned van der Waals Heterojunction Diodes and Transistors

Authors: Vinod K. Sangwan, Megan E. Beck, Alex Henning, Jiajia Luo, Hadallia Bergeron, Junmo Kang, Itamar Balla, Hadass Inbar, Lincoln J. Lauhon, Mark C. Hersam

Abstract: A general self-aligned fabrication scheme is reported here for a diverse class of electronic devices based on van der Waals materials and heterojunctions. In particular, self-alignment enables the fabrication of source-gated transistors in monolayer MoS2 with near-ideal current saturation characteristics and channel lengths down to 135 nm. Furthermore, self-alignment of van der Waals p-n heterojun… ▽ More A general self-aligned fabrication scheme is reported here for a diverse class of electronic devices based on van der Waals materials and heterojunctions. In particular, self-alignment enables the fabrication of source-gated transistors in monolayer MoS2 with near-ideal current saturation characteristics and channel lengths down to 135 nm. Furthermore, self-alignment of van der Waals p-n heterojunction diodes achieves complete electrostatic control of both the p-type and n-type constituent semiconductors in a dual-gated geometry, resulting in gate-tunable mean and variance of anti-ambipolar Gaussian characteristics. Through finite-element device simulations, the operating principles of source-gated transistors and dual-gated anti-ambipolar devices are elucidated, thus providing design rules for additional devices that employ self-aligned geometries. For example, the versatility of this scheme is demonstrated via contact-doped MoS2 homojunction diodes and mixed-dimensional heterojunctions based on organic semiconductors. The scalability of this approach is also shown by fabricating self-aligned short-channel transistors with sub-diffraction channel lengths in the range of 150 nm to 800 nm using photolithography on large-area MoS2 films grown by chemical vapor deposition. Overall, this self-aligned fabrication method represents an important step towards the scalable integration of van der Waals heterojunction devices into more sophisticated circuits and systems. △ Less

Submitted 3 February, 2018; originally announced February 2018.

Correlated In-Situ Low-Frequency Noise and Impedance Spectroscopy Reveal Recombination Dynamics in Organic Solar Cells using Fullerene and Non-Fullerene Acceptors

Authors: Kyle A. Luck, Vinod K. Sangwan, Patrick E. Hartnett, Heather N. Arnold, Michael R. Wasielewski, Tobin J. Marks, Mark C. Hersam

Abstract: Non-fullerene acceptors based on perylenediimides (PDIs) have garnered significant interest as an alternative to fullerene acceptors in organic photovoltaics (OPVs), but their charge transport phenomena are not well understood, especially in bulk heterojunctions (BHJs). Here, we investigate charge transport and current fluctuations by performing correlated low-frequency noise and impedance spectro… ▽ More Non-fullerene acceptors based on perylenediimides (PDIs) have garnered significant interest as an alternative to fullerene acceptors in organic photovoltaics (OPVs), but their charge transport phenomena are not well understood, especially in bulk heterojunctions (BHJs). Here, we investigate charge transport and current fluctuations by performing correlated low-frequency noise and impedance spectroscopy measurements on two BHJ OPV systems, one employing a fullerene acceptor and the other employing a dimeric PDI acceptor. In the dark, these measurements reveal that PDI-based OPVs have a greater degree of recombination in comparison to fullerene-based OPVs. Furthermore, for the first time in organic solar cells, 1/f noise data are fit to the Kleinpenning model to reveal underlying current fluctuations in different transport regimes. Under illumination, 1/f noise increases by approximately four orders of magnitude for the fullerene-based OPVs and three orders of magnitude for the PDI-based OPVs. An inverse correlation is also observed between noise spectral density and power conversion efficiency. Overall, these results show that low-frequency noise spectroscopy is an effective in-situ diagnostic tool to assess charge transport in emerging photovoltaic materials, thereby providing quantitative guidance for the design of next-generation solar cell materials and technologies. △ Less

Submitted 20 September, 2017; originally announced September 2017.

Comments: 37 pages, 7 figures

Hybrid, Gate-Tunable, van der Waals p-n Heterojunctions from Pentacene and MoS2

Authors: Deep Jariwala, Sarah L. Howell, Kan-Sheng Chen, Junmo Kang, Vinod K. Sangwan, Stephen A. Filippone, Riccardo Turrisi, Tobin J. Marks, Lincoln J. Lauhon, Mark C. Hersam

Abstract: The recent emergence of a wide variety of two-dimensional (2D) materials has created new opportunities for device concepts and applications. In particular, the availability of semiconducting transition metal dichalcogenides, in addition to semi-metallic graphene and insulating boron nitride, has enabled the fabrication of all 2D van der Waals heterostructure devices. Furthermore, the concept of va… ▽ More The recent emergence of a wide variety of two-dimensional (2D) materials has created new opportunities for device concepts and applications. In particular, the availability of semiconducting transition metal dichalcogenides, in addition to semi-metallic graphene and insulating boron nitride, has enabled the fabrication of all 2D van der Waals heterostructure devices. Furthermore, the concept of van der Waals heterostructures has the potential to be significantly broadened beyond layered solids. For example, molecular and polymeric organic solids, whose surface atoms possess saturated bonds, are also known to interact via van der Waals forces and thus offer an alternative for scalable integration with 2D materials. Here, we demonstrate the integration of an organic small molecule p-type semiconductor, pentacene, with a 2D n-type semiconductor, MoS2. The resulting p-n heterojunction is gate-tunable and shows asymmetric control over the anti-ambipolar transfer characteristic. In addition, the pentacene-MoS2 heterojunction exhibits a photovoltaic effect attributable to type II band alignment, which suggests that MoS2 can function as an acceptor in hybrid solar cells. △ Less

Submitted 10 December, 2015; originally announced December 2015.

Comments: 5 figures and supporting information. To appear in Nano Letters

Investigation of Band-Offsets at Monolayer-Multilayer MoS2 Junctions by Scanning Photocurrent Microscopy

Authors: Sarah L. Howell, Deep Jariwala, Chung-Chiang Wu, Kan-Sheng Chen, Vinod K. Sangwan, Junmo Kang, Tobin J. Marks, Mark C. Hersam, Lincoln J. Lauhon

Abstract: The thickness-dependent band structure of MoS2 implies that discontinuities in energy bands exist at the interface of monolayer (1L) and multilayer (ML) thin films. The characteristics of such heterojunctions are analyzed here using current versus voltage measurements, scanning photocurrent microscopy, and finite element simulations of charge carrier transport. Rectifying I-V curves are consistent… ▽ More The thickness-dependent band structure of MoS2 implies that discontinuities in energy bands exist at the interface of monolayer (1L) and multilayer (ML) thin films. The characteristics of such heterojunctions are analyzed here using current versus voltage measurements, scanning photocurrent microscopy, and finite element simulations of charge carrier transport. Rectifying I-V curves are consistently observed between contacts on opposite sides of 1L-ML junctions, and a strong bias-dependent photocurrent is observed at the junction. Finite element device simulations with varying carrier concentrations and electron affinities show that a type II band alignment at single layer/multi-layer junctions reproduces both the rectifying electrical characteristics and the photocurrent response under bias. However, the zero-bias junction photocurrent and its energy dependence are not explained by conventional photovoltaic and photothermoelectric mechanisms, indicating the contributions of hot carriers. △ Less

Submitted 30 March, 2015; originally announced March 2015.

Comments: 5 figures plus supplement