-
Characterization in Geant4 of different PET configurations
Authors:
M. L. López Toxqui,
C. H. Zepeda Fernández,
L. F. Rebolledo Herrera,
B. De Celis Alonso,
E. Moreno Barbosa
Abstract:
Positron Emission Tomography (PET) is a Nuclear Medicine technique that creates images that allow the study of metabolic activity and organ function using radiopharmaceuticals. Continuous improvement of scintillation detectors for radiation in PET as well as improvement in electronic detectors (e.g., SiPMs) and signal processing, makes the field of PET a fast and changing environment. If industry…
▽ More
Positron Emission Tomography (PET) is a Nuclear Medicine technique that creates images that allow the study of metabolic activity and organ function using radiopharmaceuticals. Continuous improvement of scintillation detectors for radiation in PET as well as improvement in electronic detectors (e.g., SiPMs) and signal processing, makes the field of PET a fast and changing environment. If industry desires to build new systems implementing these technological improvements, it is of its interest to develop modelling strategies that can provide information on how to build them, reducing time and material costs. Bearing this in mind three different PET configurations, were simulated in Geant4, to determine which one presented the best performance according to quality parameters such as spatial resolution (SR), coincident time resolution (CTR) and acceptance value (A). This was done with three different (in size) pairs of LYSO crystals + SiPM detectors. It was found that the 2 Modules system presented worst results than the two Ring detector configurations. Between the Ring configurations the first was marginally better than the second.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
The JUNO experiment Top Tracker
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato
, et al. (592 additional authors not shown)
Abstract:
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector…
▽ More
The main task of the Top Tracker detector of the neutrino reactor experiment Jiangmen Underground Neutrino Observatory (JUNO) is to reconstruct and extrapolate atmospheric muon tracks down to the central detector. This muon tracker will help to evaluate the contribution of the cosmogenic background to the signal. The Top Tracker is located above JUNO's water Cherenkov Detector and Central Detector, covering about 60% of the surface above them. The JUNO Top Tracker is constituted by the decommissioned OPERA experiment Target Tracker modules. The technology used consists in walls of two planes of plastic scintillator strips, one per transverse direction. Wavelength shifting fibres collect the light signal emitted by the scintillator strips and guide it to both ends where it is read by multianode photomultiplier tubes. Compared to the OPERA Target Tracker, the JUNO Top Tracker uses new electronics able to cope with the high rate produced by the high rock radioactivity compared to the one in Gran Sasso underground laboratory. This paper will present the new electronics and mechanical structure developed for the Top Tracker of JUNO along with its expected performance based on the current detector simulation.
△ Less
Submitted 9 March, 2023;
originally announced March 2023.
-
JUNO sensitivity to $^7$Be, $pep$, and CNO solar neutrinos
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Marco Beretta
, et al. (592 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented…
▽ More
The Jiangmen Underground Neutrino Observatory (JUNO), the first multi-kton liquid scintillator detector, which is under construction in China, will have a unique potential to perform a real-time measurement of solar neutrinos well below the few MeV threshold typical for Water Cherenkov detectors. JUNO's large target mass and excellent energy resolution are prerequisites for reaching unprecedented levels of precision. In this paper, we provide estimation of the JUNO sensitivity to 7Be, pep, and CNO solar neutrinos that can be obtained via a spectral analysis above the 0.45 MeV threshold. This study is performed assuming different scenarios of the liquid scintillator radiopurity, ranging from the most opti mistic one corresponding to the radiopurity levels obtained by the Borexino experiment, up to the minimum requirements needed to perform the neutrino mass ordering determination with reactor antineutrinos - the main goal of JUNO. Our study shows that in most scenarios, JUNO will be able to improve the current best measurements on 7Be, pep, and CNO solar neutrino fluxes. We also perform a study on the JUNO capability to detect periodical time variations in the solar neutrino flux, such as the day-night modulation induced by neutrino flavor regeneration in Earth, and the modulations induced by temperature changes driven by helioseismic waves.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Prospects for Detecting the Diffuse Supernova Neutrino Background with JUNO
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld,
Sylvie Blin
, et al. (577 additional authors not shown)
Abstract:
We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced n…
▽ More
We present the detection potential for the diffuse supernova neutrino background (DSNB) at the Jiangmen Underground Neutrino Observatory (JUNO), using the inverse-beta-decay (IBD) detection channel on free protons. We employ the latest information on the DSNB flux predictions, and investigate in detail the background and its reduction for the DSNB search at JUNO. The atmospheric neutrino induced neutral current (NC) background turns out to be the most critical background, whose uncertainty is carefully evaluated from both the spread of model predictions and an envisaged \textit{in situ} measurement. We also make a careful study on the background suppression with the pulse shape discrimination (PSD) and triple coincidence (TC) cuts. With latest DSNB signal predictions, more realistic background evaluation and PSD efficiency optimization, and additional TC cut, JUNO can reach the significance of 3$σ$ for 3 years of data taking, and achieve better than 5$σ$ after 10 years for a reference DSNB model. In the pessimistic scenario of non-observation, JUNO would strongly improve the limits and exclude a significant region of the model parameter space.
△ Less
Submitted 13 October, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Mass Testing and Characterization of 20-inch PMTs for JUNO
Authors:
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Abid Aleem,
Tsagkarakis Alexandros,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
Joao Pedro Athayde Marcondes de Andre,
Didier Auguste,
Weidong Bai,
Nikita Balashov,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli
, et al. (541 additional authors not shown)
Abstract:
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program whic…
▽ More
Main goal of the JUNO experiment is to determine the neutrino mass ordering using a 20kt liquid-scintillator detector. Its key feature is an excellent energy resolution of at least 3 % at 1 MeV, for which its instruments need to meet a certain quality and thus have to be fully characterized. More than 20,000 20-inch PMTs have been received and assessed by JUNO after a detailed testing program which began in 2017 and elapsed for about four years. Based on this mass characterization and a set of specific requirements, a good quality of all accepted PMTs could be ascertained. This paper presents the performed testing procedure with the designed testing systems as well as the statistical characteristics of all 20-inch PMTs intended to be used in the JUNO experiment, covering more than fifteen performance parameters including the photocathode uniformity. This constitutes the largest sample of 20-inch PMTs ever produced and studied in detail to date, i.e. 15,000 of the newly developed 20-inch MCP-PMTs from Northern Night Vision Technology Co. (NNVT) and 5,000 of dynode PMTs from Hamamatsu Photonics K. K.(HPK).
△ Less
Submitted 17 September, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Status and initial physics performance studies of the MPD experiment at NICA
Authors:
MPD Collaboration,
V. Abgaryan,
R. Acevedo Kado,
S. V. Afanasyev,
G. N. Agakishiev,
E. Alpatov,
G. Altsybeev,
M. Alvarado Hernández,
S. V. Andreeva,
T. V. Andreeva,
E. V. Andronov,
N. V. Anfimov,
A. A. Aparin,
V. I. Astakhov,
E. Atkin,
T. Aushev,
G. S. Averichev,
A. V. Averyanov,
A. Ayala,
V. A. Babkin,
T. Babutsidze,
I. A. Balashov,
A. Bancer,
M. Yu. Barabanov,
D. A. Baranov
, et al. (454 additional authors not shown)
Abstract:
The Nuclotron-base Ion Collider fAcility (NICA) is under construction at the Joint Institute for Nuclear Research (JINR), with commissioning of the facility expected in late 2022. The Multi-Purpose Detector (MPD) has been designed to operate at NICA and its components are currently in production. The detector is expected to be ready for data taking with the first beams from NICA. This document pro…
▽ More
The Nuclotron-base Ion Collider fAcility (NICA) is under construction at the Joint Institute for Nuclear Research (JINR), with commissioning of the facility expected in late 2022. The Multi-Purpose Detector (MPD) has been designed to operate at NICA and its components are currently in production. The detector is expected to be ready for data taking with the first beams from NICA. This document provides an overview of the landscape of the investigation of the QCD phase diagram in the region of maximum baryonic density, where NICA and MPD will be able to provide significant and unique input. It also provides a detailed description of the MPD set-up, including its various subsystems as well as its support and computing infrastructures. Selected performance studies for particular physics measurements at MPD are presented and discussed in the context of existing data and theoretical expectations.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Physics-informed neural networks to learn cardiac fiber orientation from multiple electroanatomical maps
Authors:
Carlos Ruiz Herrera,
Thomas Grandits,
Gernot Plank,
Paris Perdikaris,
Francisco Sahli Costabal,
Simone Pezzuto
Abstract:
We propose FiberNet, a method to estimate \emph{in-vivo} the cardiac fiber architecture of the human atria from multiple catheter recordings of the electrical activation. Cardiac fibers play a central role in the electro-mechanical function of the heart, yet they are difficult to determine in-vivo, and hence rarely truly patient-specific in existing cardiac models. FiberNet learns the fiber arrang…
▽ More
We propose FiberNet, a method to estimate \emph{in-vivo} the cardiac fiber architecture of the human atria from multiple catheter recordings of the electrical activation. Cardiac fibers play a central role in the electro-mechanical function of the heart, yet they are difficult to determine in-vivo, and hence rarely truly patient-specific in existing cardiac models. FiberNet learns the fiber arrangement by solving an inverse problem with physics-informed neural networks. The inverse problem amounts to identifying the conduction velocity tensor of a cardiac propagation model from a set of sparse activation maps. The use of multiple maps enables the simultaneous identification of all the components of the conduction velocity tensor, including the local fiber angle. We extensively test FiberNet on synthetic 2-D and 3-D examples, diffusion tensor fibers, and a patient-specific case. We show that 3 maps are sufficient to accurately capture the fibers, also in the presence of noise. With fewer maps, the role of regularization becomes prominent. Moreover, we show that the fitted model can robustly reproduce unseen activation maps. We envision that FiberNet will help the creation of patient-specific models for personalized medicine. The full code is available at http://github.com/fsahli/FiberNet.
△ Less
Submitted 22 July, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
A modified Brink-Axel hypothesis for astrophysical Gamow-Teller transitions
Authors:
Raul A. Herrera,
Calvin W. Johnson,
George M. Fuller
Abstract:
Weak interaction charged current transition strengths from highly excited nuclear states are fundamental ingredients for accurate modeling of compact object composition and dynamics, but are difficult to obtain either from experiment or theory. For lack of alternatives, calculations have often fallen back upon a generalized Brink-Axel hypothesis, that is, assuming the strength function (transition…
▽ More
Weak interaction charged current transition strengths from highly excited nuclear states are fundamental ingredients for accurate modeling of compact object composition and dynamics, but are difficult to obtain either from experiment or theory. For lack of alternatives, calculations have often fallen back upon a generalized Brink-Axel hypothesis, that is, assuming the strength function (transition probability) is independent of the initial nuclear state but depends only upon the transition energy and the weak interaction properties of the parent nucleus ground state. Here we present numerical evidence for a modified `local' Brink-Axel hypothesis for Gamow-Teller transitions for $pf$-shell nuclei relevant to astrophysical applications. Specifically, while the original Brink-Axel hypothesis does not hold globally, strength functions from initial states nearby in energy are similar within statistical fluctuations. This agrees with previous work on strength function moments. Using this modified hypothesis, we can tackle strength functions at previously intractable initial energies, using semi-converged initial states at arbitrary excitation energy. Our work provides a well-founded method for computing accurate thermal weak transition rates for medium-mass nuclei at temperatures occurring in stellar cores near collapse. We finish by comparing to previous calculations of astrophysical rates.
△ Less
Submitted 7 February, 2022; v1 submitted 11 November, 2021;
originally announced November 2021.
-
Performance of BeBe, a proposed dedicated beam-beam monitoring detector for the MPD-NICA experiment at JINR
Authors:
Marco Alberto Ayala Torres,
Lucina Gabriela Espinoza Beltrán,
Marcos Aurelio Fontaine Sánchez,
Luis A. Hernández-Cruz,
Luis Manuel Montaño,
Braian Adair Maldonado Luna,
Eduardo Moreno-Barbosa,
Lucio Fidel Rebolledo Herrera,
Mario Rodríguez-Cahuantzi,
Valeria Z. Reyna-Ortiz,
Guillermo Tejeda-Muñoz,
C. H. Zepeda Fernández
Abstract:
The Multipurpose Detector (MPD) is an experimental array, currently under construction, designed to study the nuclear matter created during the collisions that will be provided by the Nuclotron-based Ion Collider fAcility (NICA) at JINR. The MPD-NICA experiment consists of a typical array of particle detectors as those used to study heavy-ion collisions at LHC and RHIC. To increase the trigger cap…
▽ More
The Multipurpose Detector (MPD) is an experimental array, currently under construction, designed to study the nuclear matter created during the collisions that will be provided by the Nuclotron-based Ion Collider fAcility (NICA) at JINR. The MPD-NICA experiment consists of a typical array of particle detectors as those used to study heavy-ion collisions at LHC and RHIC. To increase the trigger capabilities of MPD for stage 2 of NICA operation, a detector conformed by two arrays of 80 plastic scintillator cells each located symmetrically at opposite sides of the interaction point of MPD is proposed (BeBe). Based on Monte Carlo simulations, a discussion of the potential physics performance of BeBe detector is given for triggering tasks and for the resolution in the determination of the event plane reaction and the centrality of the collisions at NICA. Also, laboratory measurements to estimate the time resolution of individual BeBe cells prototypes are presented. It is shown that a time resolution between 0.65 and 1.48 ns can be reached depending on the number of photosensors employed to collect the scintillation photons. The BeBe detector will be complementary to FFD and FHCAL forward detectors.
△ Less
Submitted 24 August, 2022; v1 submitted 6 October, 2021;
originally announced October 2021.
-
Radioactivity control strategy for the JUNO detector
Authors:
JUNO collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld,
Sylvie Blin
, et al. (578 additional authors not shown)
Abstract:
JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particula…
▽ More
JUNO is a massive liquid scintillator detector with a primary scientific goal of determining the neutrino mass ordering by studying the oscillated anti-neutrino flux coming from two nuclear power plants at 53 km distance. The expected signal anti-neutrino interaction rate is only 60 counts per day, therefore a careful control of the background sources due to radioactivity is critical. In particular, natural radioactivity present in all materials and in the environment represents a serious issue that could impair the sensitivity of the experiment if appropriate countermeasures were not foreseen. In this paper we discuss the background reduction strategies undertaken by the JUNO collaboration to reduce at minimum the impact of natural radioactivity. We describe our efforts for an optimized experimental design, a careful material screening and accurate detector production handling, and a constant control of the expected results through a meticulous Monte Carlo simulation program. We show that all these actions should allow us to keep the background count rate safely below the target value of 10 Hz in the default fiducial volume, above an energy threshold of 0.7 MeV.
△ Less
Submitted 13 October, 2021; v1 submitted 8 July, 2021;
originally announced July 2021.
-
Intrinsic time resolution and efficiency characterization for two size of BC-404 plastic scintillators studies in Geant4
Authors:
Cristian Heber Zepeda Fernández,
Lucio Fidel Rebolledo Herrera,
Eduardo Moreno Barbosa,
Edmundo Márquez Quintos
Abstract:
The time resolution (TR) is one of the most important characteristic of a detector. For the case of a scintillator, the collection of light also is important, it depends of the effective area of the photo-sensor (\textit{Scorer}). The Photomultipliers Tubes (PMTs), normally, have an effective area greater than the Silicon Photomultipliers (SiPMs), however, due to its voltage of operation, their si…
▽ More
The time resolution (TR) is one of the most important characteristic of a detector. For the case of a scintillator, the collection of light also is important, it depends of the effective area of the photo-sensor (\textit{Scorer}). The Photomultipliers Tubes (PMTs), normally, have an effective area greater than the Silicon Photomultipliers (SiPMs), however, due to its voltage of operation, their size or cost, in some cases it can be difficult to work with them. In which case, it is preferable to use SiPMs. The value of TR also depends of the size and geometry of the scintillator, number of photo-sensors and the electronic part.\\ In this work, we study the mean optical photon arrival time distribution (AT) to a Scorer from a SiPM of 6$\times$6~mm$^2$. We define the variation of AT as \textit{the intrinsic time resolution} (ITR). In Geant4, we simulated two different geometries: square and hexagonal, for a BC-404 plastic scintillator coupled to one Scorer. The sources simulated were Sr$^{90}$, Co$^{60}$, Cs$^{137}$, Na$^{22}$ and $μ^-$ of 1~GeV. It is shown that AT and ITR depends of the geometry and size of the plastic scintillator, the location of the Scorer, the incident particle and its energy. Then, the ITR and therefore the TR is not a constant for a detector. Finally, we show the relation between AT and the deposited energy by the particle incident, which are related in the experiment to the response time event of the detector and the deposited charge by the incident particle, respectively.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
Mobility strategies based on percolation theory to avoid the spread of diseases: COVID-19
Authors:
Diana Rosales Herrera,
J. E. Ramírez,
Jorge Velázquez-Castro,
Bogar Díaz,
M. I. Martínez,
P. Vázquez Juárez,
A. Fernández Téllez
Abstract:
Human mobility is an important factor in the propagation of infectious diseases. In particular, the spatial spread of a disease is a consequence of human mobility. On the other hand, the control strategies based on mobility restrictions are generally unpopular and costly. These high social and economic costs make it very important to design global protocols where the cost is minimized and effect…
▽ More
Human mobility is an important factor in the propagation of infectious diseases. In particular, the spatial spread of a disease is a consequence of human mobility. On the other hand, the control strategies based on mobility restrictions are generally unpopular and costly. These high social and economic costs make it very important to design global protocols where the cost is minimized and effects maximized. In this work, we calculate the percolation threshold of the spread in a network of a disease. In particular, we found the number of roads to close and regions to isolate in the Puebla State, Mexico, to avoid the global spread of COVID-19. Computational simulations taking into account the proposed strategy show a potential reduction of 94% of infections. This methodology can be used in broader and different areas to help in the design of health policies.
--
La movilidad de las personas es uno de los principales factores que propician la propagación de epidemias. En particular, es el factor que genera el esparcimiento de la enfermedad en diferentes regiones. Las medidas de control epidemiológico basadas en la restricción de movilidad son generalmente poco populares y las consecuencias económicas pueden llegar a ser muy grandes. Debido a los altos costos de estas medidas, es de gran relevancia tener estrategias globales que optimicen las medidas minimizando los costos. En este trabajo, se calcula el umbral de percolación de la propagación de enfermedades en redes. De manera particular, se encuentra el número de caminos a restringir y localidades que tienen que ser aisladas para limitar la propagación global de COVID-19 en el Estado de Puebla, México. Simulaciones computacionales donde se implementan las medidas de restricción de movilidad entre los diferentes municipios, junto con las medidas de confinamiento, muestran que es posible reducir un 94% de la población afectada comparado con el caso en el que no se implementa ninguna medida. Esta metodología puede ser aplicada a distintas zonas para ayudar a las autoridades de salud en la toma de decisiones.
△ Less
Submitted 23 May, 2021;
originally announced May 2021.
-
The Design and Sensitivity of JUNO's scintillator radiopurity pre-detector OSIRIS
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Davide Basilico,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Thilo Birkenfeld
, et al. (582 additional authors not shown)
Abstract:
The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of…
▽ More
The OSIRIS detector is a subsystem of the liquid scintillator fillling chain of the JUNO reactor neutrino experiment. Its purpose is to validate the radiopurity of the scintillator to assure that all components of the JUNO scintillator system work to specifications and only neutrino-grade scintillator is filled into the JUNO Central Detector. The aspired sensitivity level of $10^{-16}$ g/g of $^{238}$U and $^{232}$Th requires a large ($\sim$20 m$^3$) detection volume and ultralow background levels. The present paper reports on the design and major components of the OSIRIS detector, the detector simulation as well as the measuring strategies foreseen and the sensitivity levels to U/Th that can be reached in this setup.
△ Less
Submitted 31 March, 2021;
originally announced March 2021.
-
Mass production and characterization of 3-inch PMTs for the JUNO experiment
Authors:
Chuanya Cao,
Jilei Xu,
Miao He,
Angel Abusleme,
Mathieu Bongrand,
Clément Bordereau,
Dominique Breton,
Anatael Cabrera,
Agustin Campeny,
Cédric Cerna,
Haoqiang Chen,
Po-An Chen,
Gérard Claverie,
Selma Conforti Di Lorenzo,
Christophe De La Taille,
Frédéric Druillole,
Amélie Fournier,
Marco Grassi,
Xiaofei Gu,
Michael Haacke,
Yang Han,
Patrick Hellmuth,
Yuekun Heng,
Rafael Herrera,
Yee Hsiung
, et al. (42 additional authors not shown)
Abstract:
26,000 3-inch photomultiplier tubes (PMTs) have been produced for Jiangmen Underground Neutrino Observatory (JUNO) by the Hainan Zhanchuang Photonics Technology Co., Ltd (HZC) company in China and passed all acceptance tests with only 15 tubes rejected. The mass production began in 2018 and elapsed for about 2 years at a rate of $\sim$1,000~PMTs per month. The characterization of the PMTs was perf…
▽ More
26,000 3-inch photomultiplier tubes (PMTs) have been produced for Jiangmen Underground Neutrino Observatory (JUNO) by the Hainan Zhanchuang Photonics Technology Co., Ltd (HZC) company in China and passed all acceptance tests with only 15 tubes rejected. The mass production began in 2018 and elapsed for about 2 years at a rate of $\sim$1,000~PMTs per month. The characterization of the PMTs was performed in the factory concurrently with production as a joint effort between HZC and JUNO. Fifteen performance parameters were tracked at different sampling rates, and novel working strategies were implemented to improve quality assurance. This constitutes the largest sample of 3-inch PMTs ever produced and studied in detail to date.
△ Less
Submitted 26 February, 2021; v1 submitted 23 February, 2021;
originally announced February 2021.
-
Calibration Strategy of the JUNO Experiment
Authors:
JUNO collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Rizwan Ahmed,
Sebastiano Aiello,
Muhammad Akram,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Enrico Bernieri,
Thilo Birkenfeld
, et al. (571 additional authors not shown)
Abstract:
We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector ca…
▽ More
We present the calibration strategy for the 20 kton liquid scintillator central detector of the Jiangmen Underground Neutrino Observatory (JUNO). By utilizing a comprehensive multiple-source and multiple-positional calibration program, in combination with a novel dual calorimetry technique exploiting two independent photosensors and readout systems, we demonstrate that the JUNO central detector can achieve a better than 1% energy linearity and a 3% effective energy resolution, required by the neutrino mass ordering determination.
△ Less
Submitted 20 January, 2021; v1 submitted 12 November, 2020;
originally announced November 2020.
-
Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector
Authors:
Daya Bay,
JUNO collaborations,
:,
A. Abusleme,
T. Adam,
S. Ahmad,
S. Aiello,
M. Akram,
N. Ali,
F. P. An,
G. P. An,
Q. An,
G. Andronico,
N. Anfimov,
V. Antonelli,
T. Antoshkina,
B. Asavapibhop,
J. P. A. M. de André,
A. Babic,
A. B. Balantekin,
W. Baldini,
M. Baldoncini,
H. R. Band,
A. Barresi,
E. Baussan
, et al. (642 additional authors not shown)
Abstract:
To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were…
▽ More
To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Feasibility and physics potential of detecting $^8$B solar neutrinos at JUNO
Authors:
JUNO collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Sebastiano Aiello,
Muhammad Akram,
Nawab Ali,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Enrico Bernieri,
David Biare
, et al. (572 additional authors not shown)
Abstract:
The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid s…
▽ More
The Jiangmen Underground Neutrino Observatory~(JUNO) features a 20~kt multi-purpose underground liquid scintillator sphere as its main detector. Some of JUNO's features make it an excellent experiment for $^8$B solar neutrino measurements, such as its low-energy threshold, its high energy resolution compared to water Cherenkov detectors, and its much large target mass compared to previous liquid scintillator detectors. In this paper we present a comprehensive assessment of JUNO's potential for detecting $^8$B solar neutrinos via the neutrino-electron elastic scattering process. A reduced 2~MeV threshold on the recoil electron energy is found to be achievable assuming the intrinsic radioactive background $^{238}$U and $^{232}$Th in the liquid scintillator can be controlled to 10$^{-17}$~g/g. With ten years of data taking, about 60,000 signal and 30,000 background events are expected. This large sample will enable an examination of the distortion of the recoil electron spectrum that is dominated by the neutrino flavor transformation in the dense solar matter, which will shed new light on the tension between the measured electron spectra and the predictions of the standard three-flavor neutrino oscillation framework. If $Δm^{2}_{21}=4.8\times10^{-5}~(7.5\times10^{-5})$~eV$^{2}$, JUNO can provide evidence of neutrino oscillation in the Earth at the about 3$σ$~(2$σ$) level by measuring the non-zero signal rate variation with respect to the solar zenith angle. Moveover, JUNO can simultaneously measure $Δm^2_{21}$ using $^8$B solar neutrinos to a precision of 20\% or better depending on the central value and to sub-percent precision using reactor antineutrinos. A comparison of these two measurements from the same detector will help elucidate the current tension between the value of $Δm^2_{21}$ reported by solar neutrino experiments and the KamLAND experiment.
△ Less
Submitted 21 June, 2020;
originally announced June 2020.
-
TAO Conceptual Design Report: A Precision Measurement of the Reactor Antineutrino Spectrum with Sub-percent Energy Resolution
Authors:
JUNO Collaboration,
Angel Abusleme,
Thomas Adam,
Shakeel Ahmad,
Sebastiano Aiello,
Muhammad Akram,
Nawab Ali,
Fengpeng An,
Guangpeng An,
Qi An,
Giuseppe Andronico,
Nikolay Anfimov,
Vito Antonelli,
Tatiana Antoshkina,
Burin Asavapibhop,
João Pedro Athayde Marcondes de André,
Didier Auguste,
Andrej Babic,
Wander Baldini,
Andrea Barresi,
Eric Baussan,
Marco Bellato,
Antonio Bergnoli,
Enrico Bernieri,
David Biare
, et al. (568 additional authors not shown)
Abstract:
The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future re…
▽ More
The Taishan Antineutrino Observatory (TAO, also known as JUNO-TAO) is a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO). A ton-level liquid scintillator detector will be placed at about 30 m from a core of the Taishan Nuclear Power Plant. The reactor antineutrino spectrum will be measured with sub-percent energy resolution, to provide a reference spectrum for future reactor neutrino experiments, and to provide a benchmark measurement to test nuclear databases. A spherical acrylic vessel containing 2.8 ton gadolinium-doped liquid scintillator will be viewed by 10 m^2 Silicon Photomultipliers (SiPMs) of >50% photon detection efficiency with almost full coverage. The photoelectron yield is about 4500 per MeV, an order higher than any existing large-scale liquid scintillator detectors. The detector operates at -50 degree C to lower the dark noise of SiPMs to an acceptable level. The detector will measure about 2000 reactor antineutrinos per day, and is designed to be well shielded from cosmogenic backgrounds and ambient radioactivities to have about 10% background-to-signal ratio. The experiment is expected to start operation in 2022.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Index for Assessing Water Trophic Status in Semi-Enclosed Cuban Bays. Case Study: Cienfuegos Bay
Authors:
Mabel Seisdedo,
Roberto Herrera,
Gustavo Arencibia
Abstract:
This paper aims at contributing to the coastal environmental management by develo** a new trophic status index of the water (TSIW). The index is tailored to semi-enclosed bays with estuarine characteristic like the Cienfuegos bay in Cuba. We also propose pressure indicators related to exporting and assimilation capacities as a tool to assess the vulnerability of the system to eutrophication. The…
▽ More
This paper aims at contributing to the coastal environmental management by develo** a new trophic status index of the water (TSIW). The index is tailored to semi-enclosed bays with estuarine characteristic like the Cienfuegos bay in Cuba. We also propose pressure indicators related to exporting and assimilation capacities as a tool to assess the vulnerability of the system to eutrophication. The TSIW is based on response indicators to eutrophication processes showing correspondence with the predefined pressure indicators and previous reports on water quality. Thus, the proposed trophic status index is a reliable scientific tool to measure the current stage of the water quality and to establish a baseline for further studies.
△ Less
Submitted 28 May, 2013;
originally announced May 2013.
-
Time-Frequency Representation of Microseismic Signals using the Synchrosqueezing Transform
Authors:
Roberto H. Herrera,
Jean-Baptiste Tary,
Mirko van der Baan
Abstract:
Resonance frequencies can provide useful information on the deformation occurring during fracturing experiments or $CO_2$ management, complementary to the microseismic event distribution. An accurate time-frequency representation is of crucial importance prior to interpreting the cause of resonance frequencies during microseismic experiments. The popular methods of Short-Time Fourier Transform (ST…
▽ More
Resonance frequencies can provide useful information on the deformation occurring during fracturing experiments or $CO_2$ management, complementary to the microseismic event distribution. An accurate time-frequency representation is of crucial importance prior to interpreting the cause of resonance frequencies during microseismic experiments. The popular methods of Short-Time Fourier Transform (STFT) and wavelet analysis have limitations in representing close frequencies and dealing with fast varying instantaneous frequencies and this is often the nature of microseismic signals. The synchrosqueezing transform (SST) is a promising tool to track these resonant frequencies and provide a detailed time-frequency representation. Here we apply the synchrosqueezing transform to microseismic signals and also show its potential to general seismic signal processing applications.
△ Less
Submitted 7 January, 2013;
originally announced January 2013.
-
Automated seismic-to-well ties?
Authors:
Roberto Henry Herrera,
Mirko van der Baan
Abstract:
The quality of seismic-to-well tie is commonly quantified using the classical Pearson's correlation coefficient. However the seismic wavelet is time-variant, well logging and upscaling is only approximate, and the correlation coefficient does not follow this nonlinear behavior. We introduce the Dynamic Time War** (DTW) to automate the tying process, accounting for frequency and time variance. Th…
▽ More
The quality of seismic-to-well tie is commonly quantified using the classical Pearson's correlation coefficient. However the seismic wavelet is time-variant, well logging and upscaling is only approximate, and the correlation coefficient does not follow this nonlinear behavior. We introduce the Dynamic Time War** (DTW) to automate the tying process, accounting for frequency and time variance. The Dynamic Time War** method can follow the nonlinear behavior better than the commonly used correlation coefficient. Furthermore, the quality of the similarity value does not depend on the selected correlating window. We compare the developed method with the manual seismic-to-well tie in a benchmark case study.
△ Less
Submitted 2 September, 2012;
originally announced September 2012.
-
Short-time homomorphic wavelet estimation
Authors:
Roberto H. Herrera,
Mirko Van der Baan
Abstract:
Successful wavelet estimation is an essential step for seismic methods like impedance inversion, analysis of amplitude variations with offset and full waveform inversion. Homomorphic deconvolution has long intrigued as a potentially elegant solution to the wavelet estimation problem. Yet a successful implementation has proven difficult. Associated disadvantages like phase unwrap** and restrictio…
▽ More
Successful wavelet estimation is an essential step for seismic methods like impedance inversion, analysis of amplitude variations with offset and full waveform inversion. Homomorphic deconvolution has long intrigued as a potentially elegant solution to the wavelet estimation problem. Yet a successful implementation has proven difficult. Associated disadvantages like phase unwrap** and restrictions of sparsity in the reflectivity function limit its application. We explore short-time homomorphic wavelet estimation as a combination of the classical homomorphic analysis and log-spectral averaging. The introduced method of log-spectral averaging using a short-term Fourier transform increases the number of sample points, thus reducing estimation variances. We apply the developed method on synthetic and real data examples and demonstrate good performance.
△ Less
Submitted 9 January, 2013; v1 submitted 2 September, 2012;
originally announced September 2012.
-
Application of Fractional Fourier Transform in Cepstrum Analysis
Authors:
K. H. Miah,
R. H. Herrera,
M. van der Baan,
M. D. Sacchi
Abstract:
Source wavelet estimation is the key in seismic signal processing for resolving subsurface structural properties. Homomorphic deconvolution using cepstrum analysis has been an effective method for wavelet estimation for decades. In general, the inverse of the Fourier transform of the logarithm of a signal's Fourier transform is the cepstral domain representation of that signal. The convolution ope…
▽ More
Source wavelet estimation is the key in seismic signal processing for resolving subsurface structural properties. Homomorphic deconvolution using cepstrum analysis has been an effective method for wavelet estimation for decades. In general, the inverse of the Fourier transform of the logarithm of a signal's Fourier transform is the cepstral domain representation of that signal. The convolution operation of two signals in the time domain becomes an addition in the cepstral domain. The fractional Fourier transform (FRFT) is the generalization of the standard Fourier transform (FT). In an FRFT, the transformation kernel is a set of linear chirps whereas the kernel is composed of complex sinusoids for the FT. Depending on the fractional order, signals can be represented in multiple domains. This gives FRFT an extra degree of freedom in signal analysis over the standard FT. In this paper, we have taken advantage of the multidomain nature of the FRFT and applied it to cepstral analysis. We term this combination the Fractional-Cepstrum (FC). We derive the real FC formulation, and give an example using wavelets to show the multidomain representation of the traditional cepstrum with different fractional orders of the FRFT.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
Revisiting Homomorphic Wavelet Estimation and Phase Unwrap**
Authors:
Roberto H. Herrera,
Mirko van der Baan
Abstract:
Surface-consistent deconvolution is a standard processing technique in land data to uniformize the wavelet across all sources and receivers. The required wavelet estimation step is generally done in the homomorphic domain since this is a convenient way to separate the phase and the amplitude spectrum in a linear fashion. Unfortunately all surface-consistent deconvolutions make a minimum-phase assu…
▽ More
Surface-consistent deconvolution is a standard processing technique in land data to uniformize the wavelet across all sources and receivers. The required wavelet estimation step is generally done in the homomorphic domain since this is a convenient way to separate the phase and the amplitude spectrum in a linear fashion. Unfortunately all surface-consistent deconvolutions make a minimum-phase assumption which is likely to be sub-optimal. Recent developments in statistical wavelet estimation demonstrate that nonminimum wavelets can be estimated directly from seismic data, thus offering promise to create a nonminimum phase surface-consistent deconvolution approach. Unfortunately the major impediment turns out to be phase unwrap**. In this paper we review several existing phase unwrap** techniques and discuss their advantages and inconveniences.
△ Less
Submitted 2 March, 2012;
originally announced May 2012.
-
Slow-light effect in dual-periodic photonic lattice
Authors:
Alexey G. Yamilov,
Mark R. Herrera,
Massimo F. Bertino
Abstract:
We present analytical and numerical study of photonic lattice with short- and long-range harmonic modulations of the refractive index. Such structures can be prepared experimentally with holographic photolithography. In the spectral region of photonic bandgap of the underlying single-periodic crystal, we observe a series of bands with anomalously small dispersion. The related slow-light effect i…
▽ More
We present analytical and numerical study of photonic lattice with short- and long-range harmonic modulations of the refractive index. Such structures can be prepared experimentally with holographic photolithography. In the spectral region of photonic bandgap of the underlying single-periodic crystal, we observe a series of bands with anomalously small dispersion. The related slow-light effect is attributed to the long-range modulation in the photonic lattice, that leads to formation of an array of evanescently-coupled high-$Q$ cavities. The band structure of the lattice is studied with several techniques: (i) transfer matrix approach; (ii) analysis of resonant coupling in process of band folding; (iii) effective medium approach based on coupled-mode theory; and (iv) Bogolyubov-Mitropolsky approach. The latter method, commonly used in the studies of nonlinear oscillators, was employed to investigate the behavior of the eigen-function envelopes and the band structure of our dual-periodic photonic lattice. We show that reliable results can be obtained even in the case of large refractive index modulation.
△ Less
Submitted 13 November, 2007;
originally announced November 2007.
