-
Performance Test Methodology for Atmosphere-Breathing Electric Propulsion Intakes in an Atomic Oxygen Facility
Authors:
Alexander T. Cushen,
Vitor T. A. Oiko,
Katharine L. Smith,
Nicholas H. Crisp,
Peter C. E. Roberts,
Francesco Romano,
Konstantinos Papavramidis,
Georg Herdrich
Abstract:
The testing of atmosphere-breathing electric propulsion intakes is an important step in the development of functional propulsion systems which provide sustained drag compensation in very low Earth orbits. To make satellite operations more sustainable, it is necessary to develop new materials which withstand erosion, long-lasting propulsion systems to overcome drag, and tools that allow for ground-…
▽ More
The testing of atmosphere-breathing electric propulsion intakes is an important step in the development of functional propulsion systems which provide sustained drag compensation in very low Earth orbits. To make satellite operations more sustainable, it is necessary to develop new materials which withstand erosion, long-lasting propulsion systems to overcome drag, and tools that allow for ground-based testing. Among the tools to enable these innovations is the Rarefied Orbital Aerodynamics Research facility at the University of Manchester. Here, a description of the facility is provided together with two different methodologies for testing sub-scaled intake designs for atmosphere-breathing electric propulsion systems. The first methodology is based on measurements of the pressure difference between the two extremities of the intake, while the second uses a gas sensor to measure the collection efficiency of the intake. Direct Simulation Monte Carlo models have been used to assess the viability of the proposed testing methodologies. The results of this analysis indicate that either methodology or a combination of both can provide suitable measurements to assess the performance of future intake designs.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Influence of Specific Energy Inhomogeneity on the CO2 Splitting Performance in a High-Power Plasma Jet
Authors:
Hendrik Burghaus,
Clemens F. Kaiser,
Stefanos Fasoulas,
Georg Herdrich
Abstract:
Plasma-based CO2 conversion is a promising pathway towards greenhouse gas recycling. In the corresponding research field, various types of plasma reactors are applied for carbon dioxide dissociation. So far, spatial inhomogeneities of the specific energy (SEI) distribution in plasma generators, e.g., induced by non-uniform heating or an inhomogeneous mass distribution, are not the focus of the inv…
▽ More
Plasma-based CO2 conversion is a promising pathway towards greenhouse gas recycling. In the corresponding research field, various types of plasma reactors are applied for carbon dioxide dissociation. So far, spatial inhomogeneities of the specific energy (SEI) distribution in plasma generators, e.g., induced by non-uniform heating or an inhomogeneous mass distribution, are not the focus of the investigations. In this work, the spatial inhomogeneity of mass-specific enthalpy in the plasma jet of the inductive plasma generator IPG4 at the Institute of Space Systems (IRS) is examined. For this, the mean mass-specific enthalpy as well as the radial distribution of the local enthalpy are measured using plasma probes. Moreover, the influence of the determined specific enthalpy inhomogeneity on the CO2 splitting performance is quantified. It is shown that an inhomogeneous radial distribution of the specific energy can significantly lower the carbon dioxide conversion, compared to a homogeneous case. With regards to IPG4, the performance reduction is 16 %.
△ Less
Submitted 4 September, 2023; v1 submitted 21 June, 2023;
originally announced June 2023.
-
Design of an Intake and a Thruster for an Atmosphere-Breathing Electric Propulsion System
Authors:
F. Romano,
G. Herdrich,
Y. -A. Chan,
N. H. Crisp,
P. C. E. Roberts,
B. E. A. Holmes,
S. Edmondson,
S. Haigh,
A. Macario-Rojas,
V. T. A. Oiko,
L. A. Sinpetru K. Smith,
J. Becedas,
V. Sulliotti-Linner,
M. Bisgaard,
S. Christensen,
V. Hanessian,
T. Kauffman Jensen,
J. Nielsen,
S. Fasoulas,
C. Traub,
D. García-Almiñana,
S. Rodríguez-Donaire,
M. Sureda,
D. Kataria,
B. Belkouchi
, et al. (3 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an efficient propulsion system is required.
One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. One of the objectives of the H2020 DISCOVERER project, is the development of an intake and an electrode-less plasma thruster for an ABEP system.
The article describes the characteristics of intake design and the respective final deigns providing collection efficiencies up to $94\%$. On the other side, the radio frequency (RF) Helicon-based plasma thruster (IPT) developed at IRS, is hereby presented as well, while its performances are being evaluated, the thruster has been operated with single atmospheric species as propellant, and has highlighted very low input power requirement for operation at comparable mass flow rates $P\sim 60~W$.
△ Less
Submitted 23 November, 2022; v1 submitted 18 November, 2022;
originally announced November 2022.
-
Development and analysis of novel mission scenarios based on Atmosphere-Breathing Electric Propulsion (ABEP)
Authors:
S. Vaidya,
C. Traub,
F. Romano,
G. Herdrich,
Y. -A. Chan,
S. Fasoulas,
P. C. E. Roberts,
N. Crisp,
S. Edmondson,
S. Haigh,
B. A. Holmes,
A. Macario-Rojas,
V. T. Abrao Oiko,
K. Smith,
L. Sinpetru,
J. Becedas,
V. Sulliotti-Linner,
S. Christensen,
V. Hanessian,
T. K. Jensen,
J. Nielsen,
M. Bisgaard,
D. Garcia-Alminana,
S. Rodriguez-Donaire,
M. Suerda
, et al. (6 additional authors not shown)
Abstract:
Operating satellites in Very Low Earth Orbit (VLEO) benefits the already expanding New Space industry in applications including Earth Observation and beyond. However, long-term operations at such low altitudes require propulsion systems to compensate for the large aerodynamic drag forces. When using conventional propulsion systems, the amount of storable propellant limits the maximum mission lifet…
▽ More
Operating satellites in Very Low Earth Orbit (VLEO) benefits the already expanding New Space industry in applications including Earth Observation and beyond. However, long-term operations at such low altitudes require propulsion systems to compensate for the large aerodynamic drag forces. When using conventional propulsion systems, the amount of storable propellant limits the maximum mission lifetime. The latter can be avoided by employing Atmosphere-Breathing Electric Propulsion (ABEP) system, which collects the residual atmospheric particles and uses them as propellant for an electric thruster. Thus, the requirement of on-board propellant storage can ideally be nullified. At the Institute of Space Systems (IRS) of the University of Stuttgart, an intake, and a RF Helicon-based Plasma Thruster (IPT) for ABEP system are developed within the Horizons 2020 funded DISCOVERER project. In order to assess possible future use cases, this paper proposes and analyzes several novel ABEP based mission scenarios. Beginning with technology demonstration mission in VLEO, more complex mission scenarios are derived and discussed in detail. These include, amongst others, orbit maintenance around Mars as well as refuelling and space tug missions. The results show that the ABEP system is not only able to compensate drag for orbit maintenance but also capable of performing orbital maneuvers and collect propellant for applications such as Space Tug and Refuelling. Thus, showing a multitude of different future mission applications.
△ Less
Submitted 21 November, 2022; v1 submitted 17 November, 2022;
originally announced November 2022.
-
A planning tool for optimal three-dimensional formation flight maneuvers of satellites in VLEO using aerodynamic lift and drag via yaw angle deviations
Authors:
Constantin Traub,
Stefanos Fasoulas,
Georg H. Herdrich
Abstract:
Differential drag is a promising option to control the relative motion of distributed satellites in the Very Low Earth Orbit regime which are not equipped with dedicated thrusting devices. A major downside of the methodology, however, is that its control authority is (mainly) limited to the in-plane relative motion control. By additionally applying differential lift, however, all three translation…
▽ More
Differential drag is a promising option to control the relative motion of distributed satellites in the Very Low Earth Orbit regime which are not equipped with dedicated thrusting devices. A major downside of the methodology, however, is that its control authority is (mainly) limited to the in-plane relative motion control. By additionally applying differential lift, however, all three translational degrees-of-freedom become controllable. In this article, we present a tool to flexibly plan optimal three-dimensional formation flight maneuvers via differential lift and drag. In the planning process, the most significant perturbing effects in this orbital regime, namely the J2 effect and atmospheric forces, are taken into account. Moreover, varying atmospheric densities as well as the co-rotation of the atmosphere are considered. Besides its flexible and high-fidelity nature, the major assets of the proposed methodology are that the in-and out-of-plane relative motion are controlled simultaneously via deviations in the yaw angles of the respective satellites and that the planned trajectory is optimal in a sense that the overall decay during the maneuver is minimized. Thereby, the remaining lifetime of the satellites is maximized and the practicability and sustainability of the methodology significantly increased. To the best of the authors knowledge, a tool with the given capabilities has not yet been presented in literature. The resulting trajectories for three fundamentally different relevant formation flight maneuvers are presented and discussed in detail in order to indicate the vast range of applicability of the tool.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Uncertainties and Design of Active Aerodynamic Attitude Control in Very Low Earth Orbit
Authors:
Sabrina Livadiotti,
Nicholas H. Crisp,
Peter C. E. Roberts,
Vitor T. A. Oiko,
Simon Christensen,
Rosa Maria Dominguez,
Georg H. Herdrich
Abstract:
This paper discusses the design and the performance achievable with active aerodynamic attitude control in very low Earth orbit, i.e. below 450 km in altitude. A novel real-time algorithm is proposed for selecting the angles of deflection of aerodynamic actuators providing the closest match to the control signal computed by a selected control law. The algorithm is based on a panel method for the c…
▽ More
This paper discusses the design and the performance achievable with active aerodynamic attitude control in very low Earth orbit, i.e. below 450 km in altitude. A novel real-time algorithm is proposed for selecting the angles of deflection of aerodynamic actuators providing the closest match to the control signal computed by a selected control law. The algorithm is based on a panel method for the computation of the aerodynamic coefficients and relies on approximate environmental parameters estimation and worst-case scenario assumptions for the re-emission properties of space materials. Discussion of results is performed by assuming two representative pointing manoeuvres, for which momentum wheels and aerodynamic actuators are used synergistically. A quaternion feedback PID controller implemented in discrete time is assumed to determine the control signal at a sampling frequency of 1 Hz. The outcome of a Monte Carlo analysis, performed for a wide range of orbital conditions, shows that the target attitude is successfully achieved for the vast majority of the cases, thus proving the robustness of the approach in the presence of environmental uncertainties and realistic attitude hardware limitations.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
ADBSat: Verification and validation of a novel panel method for quick aerodynamic analysis of satellites
Authors:
Luciana Sinpetru,
Nicholas H. Crisp,
Peter C. E. Roberts,
Valeria Sulliotti-Linner,
Virginia Hanessian,
Georg H. Herdrich,
Francesco Romano,
Daniel Garcia-Alminana,
Silvia Rodriguez-Donaire,
Simon Seminari
Abstract:
We present the validation of ADBSat, a novel implementation of the panel method including a fast pseudo-shading algorithm, that can quickly and accurately determine the forces and torques on satellites in free-molecular flow. Our main method of validation is comparing test cases between ADBSat, the current de facto standard of direct simulation Monte Carlo (DSMC), and published literature. ADBSat…
▽ More
We present the validation of ADBSat, a novel implementation of the panel method including a fast pseudo-shading algorithm, that can quickly and accurately determine the forces and torques on satellites in free-molecular flow. Our main method of validation is comparing test cases between ADBSat, the current de facto standard of direct simulation Monte Carlo (DSMC), and published literature. ADBSat exhibits a significantly shorter runtime than DSMC and performs well, except where deep concavities are present in the satellite models. The shading algorithm also experiences problems when a large proportion of the satellite surface area is oriented parallel to the flow, but this can be mitigated by examining the body at small angles to this configuration (${\pm}$ 0.1°). We recommend that an error interval on ADBSat outputs of up to 3\% is adopted. Therefore, ADBSat is a suitable tool for quickly determining the aerodynamic characteristics of a wide range of satellite geometries in different environmental conditions in VLEO. It can also be used in a complementary manner to identify cases that warrant further investigation using other numerical-based methods.
△ Less
Submitted 22 February, 2022; v1 submitted 12 October, 2021;
originally announced October 2021.
-
System Modelling of Very Low Earth Orbit Satellites for Earth Observation
Authors:
N. H. Crisp,
P. C. E. Roberts,
K. L. Smith,
V. T. A. Oiko,
V. Sulliotti-Linner,
V. Hanessian,
G. H. Herdrich,
Daniel García-Almiñana,
D. Kataria,
S. Seminari
Abstract:
The operation of satellites in very low Earth orbit (VLEO) has been linked to a variety of benefits to both the spacecraft platform and mission design. Critically, for Earth observation (EO) missions a reduction in altitude can enable smaller and less powerful payloads to achieve the same performance as larger instruments or sensors at higher altitude, with significant benefits to the spacecraft d…
▽ More
The operation of satellites in very low Earth orbit (VLEO) has been linked to a variety of benefits to both the spacecraft platform and mission design. Critically, for Earth observation (EO) missions a reduction in altitude can enable smaller and less powerful payloads to achieve the same performance as larger instruments or sensors at higher altitude, with significant benefits to the spacecraft design. As a result, renewed interest in the exploitation of these orbits has spurred the development of new technologies that have the potential to enable sustainable operations in this lower altitude range. In this paper, system models are developed for (i) novel materials that improve aerodynamic performance enabling reduced drag or increased lift production and resistance to atomic oxygen erosion and (ii) atmosphere-breathing electric propulsion (ABEP) for sustained drag compensation or mitigation in VLEO. Attitude and orbit control methods that can take advantage of the aerodynamic forces and torques in VLEO are also discussed. These system models are integrated into a framework for concept-level satellite design and this approach is used to explore the system-level trade-offs for future EO spacecraft enabled by these new technologies. A case-study presented for an optical very-high resolution spacecraft demonstrates the significant potential of reducing orbital altitude using these technologies and indicates possible savings of up to 75% in system mass and over 50% in development and manufacturing costs in comparison to current state-of-the-art missions. For a synthetic aperture radar (SAR) satellite, the reduction in mass and cost with altitude were shown to be smaller, though it was noted that currently available cost models do not capture recent commercial advancements in this segment...
△ Less
Submitted 5 August, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
Intake Design for an Atmosphere-Breathing Electric Propulsion System (ABEP)
Authors:
F. Romano,
J. Espinosa-Orozco,
M. Pfeiffer,
G. Herdrich,
N. H. Crisp,
P. C. E. Roberts,
B. E. A. Holmes,
S. Edmondson,
S. Haigh,
S. Livadiotti,
A. Macario-Rojas,
V. T. A. Oiko,
L. A. Sinpetru,
K. Smith,
J. Becedas,
V. Sulliotti-Linner,
M. Bisgaard,
S. Christensen,
V. Hanessian,
T. Kauffman Jensen,
J. Nielsen,
Y. -A. Chan,
S. Fasoulas,
C. Traub,
D. García-Almiñana
, et al. (7 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. IRS is develo**, within the H2020 DISCOVERER project, an intake and a thruster for an ABEP system. The article describes the design and simulation of the intake, optimized to feed the radio frequency (RF) Helicon-based plasma thruster developed at IRS. The article deals in particular with the design of intakes based on diffuse and specular reflecting materials, which are analysed by the PICLas DSMC-PIC tool. Orbital altitudes $h=150-250$ km and the respective species based on the NRLMSISE-00 model (O, $N_2$, $O_2$, He, Ar, H, N) are investigated for several concepts based on fully diffuse and specular scattering, including hybrid designs. The major focus has been on the intake efficiency defined as $η_c=\dot{N}_{out}/\dot{N}_{in}$, with $\dot{N}_{in}$ the incoming particle flux, and $\dot{N}_{out}$ the one collected by the intake. Finally, two concepts are selected and presented providing the best expected performance for the operation with the selected thruster. The first one is based on fully diffuse accommodation yielding to $η_c<0.46$ and the second one based un fully specular accommodation yielding to $η_c<0.94$. Finally, also the influence of misalignment with the flow is analysed, highlighting a strong dependence of $η_c$ in the diffuse-based intake while, ...
△ Less
Submitted 1 July, 2021; v1 submitted 30 June, 2021;
originally announced June 2021.
-
System Analysis and Test-Bed for an Atmosphere-Breathing Electric Propulsion System using an Inductive Plasma Thruster
Authors:
Francesco Romano,
Bartomeu Massutí-Ballester,
Tilman Binder,
Georg Herdrich,
Stefanos Fasoulas,
Tony Schönherr
Abstract:
Challenging space mission scenarios include those in low altitude orbits, where the atmosphere creates significant drag to the S/C and forces their orbit to an early decay. For drag compensation, propulsion systems are needed, requiring propellant to be carried on-board. An atmosphere-breathing electric propulsion system (ABEP) ingests the residual atmosphere particles through an intake and uses t…
▽ More
Challenging space mission scenarios include those in low altitude orbits, where the atmosphere creates significant drag to the S/C and forces their orbit to an early decay. For drag compensation, propulsion systems are needed, requiring propellant to be carried on-board. An atmosphere-breathing electric propulsion system (ABEP) ingests the residual atmosphere particles through an intake and uses them as propellant for an electric thruster. Theoretically applicable to any planet with atmosphere, the system might allow to orbit for unlimited time without carrying propellant. A new range of altitudes for continuous operation would become accessible, enabling new scientific missions while reducing costs. Preliminary studies have shown that the collectible propellant flow for an ion thruster (in LEO) might not be enough, and that electrode erosion due to aggressive gases, such as atomic oxygen, will limit the thruster lifetime. In this paper an inductive plasma thruster (IPT) is considered for the ABEP system. The starting point is a small scale inductively heated plasma generator IPG6-S. These devices are electrodeless and have already shown high electric-to-thermal coupling efficiencies using O2 and CO2. The system analysis is integrated with IPG6-S tests to assess mean mass-specific energies of the plasma plume and estimate exhaust velocities.
△ Less
Submitted 4 March, 2021; v1 submitted 3 March, 2021;
originally announced March 2021.
-
In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)
Authors:
N. H. Crisp,
P. C. E. Roberts,
S. Livadiotti,
A. Macario Rojas,
V. T. A. Oiko,
S. Edmondson,
S. J. Haigh,
B. E. A. Holmes,
L. A. Sinpetru,
K. L. Smith,
J. Becedas,
R. M. Dominguez,
V. Sulliotti-Linner,
S. Christensen,
J. Nielsen,
M. Bisgaard,
Y-A. Chan,
S. Fasoulas,
G. H. Herdrich,
F. Romano,
C. Traub,
D. Garcia-Alminana,
S. Rodriguez-Donaire,
M. Sureda,
D. Kataria
, et al. (4 additional authors not shown)
Abstract:
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are impo…
▽ More
The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km.
△ Less
Submitted 17 December, 2020; v1 submitted 14 December, 2020;
originally announced December 2020.
-
The IPG6-B as a Research Facility to support Future Development of Electric Propulsion
Authors:
Jens Schmidt,
René Laufer,
Truell Hyde,
Georg Herdrich
Abstract:
The inductively-heated plasma generator IPG6-B at Baylor University has been established and characterized in previous years for use as a flexible experimental research facility across multiple applications. The system uses a similar plasma generator design to its twin-facilities at the University of Stuttgart (IPG6-S) and the University of Kentucky (IPG6-UKY). The similarity between these three d…
▽ More
The inductively-heated plasma generator IPG6-B at Baylor University has been established and characterized in previous years for use as a flexible experimental research facility across multiple applications. The system uses a similar plasma generator design to its twin-facilities at the University of Stuttgart (IPG6-S) and the University of Kentucky (IPG6-UKY). The similarity between these three devices offers the advantage to reproduce results and provides comparability to achieve cross-referencing and verification. Sub- and supersonic flow conditions for Mach numbers between $Ma = 0.3 - 1.4$ have been characterized for air, argon, helium and nitrogen using a pitot probe. Overall power coupling efficiency as well as specific bulk enthalpy of the flow have been determined by calorimeter measurements to be between $η= 0.05 - 0.45$ and $h_s = 5- 35$ MJ/kg respectively depending on gas type and pressure. Electron temperatures of $T_e = 1 - 2$ eV and densities $n_e = 10^{18} - 10^{20} m^{-3}$ have been measured using an electrostatic probe system. At Baylor University, laboratory experiments in the areas of astrophysics, geophysics as well as fundamental research on complex (dusty) plasmas are planned. Most recent experiments include the study of dusty plasmas and astrophysical phenomena and the interaction of charged dust with electric and magnetic fields. In this case, dust can be used as a diagnostic for such fields and can reveal essential information of the magneto-hydrodynamics in low-temperature plasmas.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
A Review of Gas-Surface Interaction Models for Orbital Aerodynamics Applications
Authors:
Sabrina Livadiotti,
Nicholas H. Crisp,
Peter C. E. Roberts,
Stephen D. Worrall,
Vitor T. A. Oiko,
Steve Edmondson,
Sarah J. Haigh,
Claire Huyton,
Katharine L. Smith,
Luciana A. Sinpetru,
Brandon E. A. Holmes,
Jonathan Becedas,
Rosa María Domínguez,
Valentín Cañas,
Simon Christensen,
Anders Mølgaard,
Jens Nielsen,
Morten Bisgaard,
Yung-An Chan,
Georg H. Herdrich,
Francesco Romano,
Stefanos Fasoulas,
Constantin Traub,
Daniel Garcia-Almiñana,
Silvia Rodriguez-Donaire
, et al. (7 additional authors not shown)
Abstract:
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the su…
▽ More
Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications.
△ Less
Submitted 22 November, 2020; v1 submitted 1 October, 2020;
originally announced October 2020.
-
The Benefits of Very Low Earth Orbit for Earth Observation Missions
Authors:
N. H. Crisp,
P. C. E. Roberts,
S. Livadiotti,
V. T. A. Oiko,
S. Edmondson,
S. J. Haigh,
C. Huyton,
L. Sinpetru,
K. L. Smith,
S. D. Worrall,
J. Becedas,
R. M. Domínguez,
D. González,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
Y. -A. Chan,
S. Fasoulas,
G. H. Herdrich,
F. Romano,
C. Traub,
D. García-Almiñana,
S. Rodríguez-Donaire,
M. Sureda
, et al. (8 additional authors not shown)
Abstract:
Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth ob…
▽ More
Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods.
However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required.
△ Less
Submitted 16 July, 2020; v1 submitted 15 July, 2020;
originally announced July 2020.
-
RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)
Authors:
Francesco Romano,
Yung-An Chan,
Georg Herdrich,
Peter C. E. Roberts,
C. Traub S. Fasoulas,
K. Smith,
S. Edmondson,
S. Haigh,
N. H. Crisp,
V. T. A. Oiko,
S. D. Worrall,
S. Livadiotti,
C. Huyton,
L. A. Sinpetru,
A. Straker,
J. Becedas,
R. M. Domínguez,
D. González,
V. Cañas,
V. Sulliotti-Linner,
V. Hanessian,
A. Mølgaard,
J. Nielsen,
M. Bisgaard,
D. Garcia-Almiñana
, et al. (10 additional authors not shown)
Abstract:
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirem…
▽ More
Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is develo** within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented
△ Less
Submitted 14 July, 2020; v1 submitted 13 July, 2020;
originally announced July 2020.
