Showing 1–15 of 15 results for author: Hendriks, J

Broadband single-mode planar waveguides in monolithic 4H-SiC

Authors: Tom Bosma, Joop Hendriks, Misagh Ghezellou, Nguyen T. Son, Jawad Ul-Hassan, Caspar H. van der Wal

Abstract: Color-center defects in silicon carbide promise opto-electronic quantum applications in several fields, such as computing, sensing and communication. In order to scale down and combine these functionalities with the existing silicon device platforms, it is crucial to consider SiC integrated optics. In recent years many examples of SiC photonic platforms have been shown, like photonic crystal cavit… ▽ More Color-center defects in silicon carbide promise opto-electronic quantum applications in several fields, such as computing, sensing and communication. In order to scale down and combine these functionalities with the existing silicon device platforms, it is crucial to consider SiC integrated optics. In recent years many examples of SiC photonic platforms have been shown, like photonic crystal cavities, film-on-insulator waveguides and micro-ring resonators. However, all these examples rely on separating thin films of SiC from substrate wafers. This introduces significant surface roughness, strain and defects in the material, which greatly affects the homogeneity of the optical properties of color centers. Here we present and test a method for fabricating monolithic single-crystal integrated-photonic devices in SiC: tuning optical properties via charge carrier concentration. We fabricated monolithic SiC n-i-n and p-i-n junctions where the intrinsic layer acts as waveguide core, and demonstrate the waveguide functionality for these samples. The propagation losses are below 14 dB/cm. These waveguide types allow for addressing color-centers over a broad wavelength range with low strain-induced inhomogeneity of the optical-transition frequencies. Furthermore, we expect that our findings open the road to fabricating waveguides and devices based on p-i-n junctions, which will allow for integrated electrostatic and radio frequency (RF) control together with high-intensity optical control of defects in silicon carbide. △ Less

Submitted 22 February, 2022; originally announced February 2022.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Journal of Applied Physics 131, 025703 (2022) and may be found at https://aip.scitation.org/doi/10.1063/5.0077164

Journal ref: Journal of Applied Physics 131, 025703 (2022)

Intragranular Strain Estimation in Far-Field Scanning X-ray Diffraction using a Gaussian Processes

Authors: Axel Henningsson, Johannes Hendriks

Abstract: A new method for estimation of intragranular strain fields in polycrystalline materials based on scanning three-dimensional X-ray diffraction data (scanning-3DXRD) is presented and evaluated. Given an apriori known anisotropic compliance, the regression method enforces the balance of linear and angular momentum in the linear elastic strain field reconstruction. By using a Gaussian Process (GP), th… ▽ More A new method for estimation of intragranular strain fields in polycrystalline materials based on scanning three-dimensional X-ray diffraction data (scanning-3DXRD) is presented and evaluated. Given an apriori known anisotropic compliance, the regression method enforces the balance of linear and angular momentum in the linear elastic strain field reconstruction. By using a Gaussian Process (GP), the presented method can yield a spatial estimate of the uncertainty of the reconstructed strain field. Furthermore, constraints on spatial smoothness can be optimised with respect to measurements through hyperparameter estimation. These three features address weaknesses discussed for previously existing scanning-3DXRD reconstruction methods and, thus, offers a more robust strain field estimation. The method is twofold validated; firstly by reconstruction from synthetic diffraction data and, secondly, by reconstruction of previously studied tin (Sn) grain embedded in a polycrystalline specimen. Comparison against reconstructions achieved by a recently proposed algebraic inversion technique is also presented. It is found that the GP regression consistently produces reconstructions with lower root mean squared errors, mean absolute errors and maximum absolute errors across all six components of strain. △ Less

Submitted 15 June, 2021; v1 submitted 15 February, 2021; originally announced February 2021.

Journal ref: J. Appl. Cryst. 54 (2021)

Radial Basis Functions and Improved Hyperparameter Optimisation for Gaussian Process Strain Estimation

Authors: A. W. T. Gregg, J. N. Hendriks, C. M. Wensrich, N. O'Dell

Abstract: Over the past decade, a number of algorithms for full-field elastic strain estimation from neutron and X-ray measurements have been published. Many of the recently published algorithms rely on modelling the unknown strain field as a Gaussian Process (GP) - a probabilistic machine-learning technique. Thus far, GP-based algorithms have assumed a high degree of smoothness and continuity in the unknow… ▽ More Over the past decade, a number of algorithms for full-field elastic strain estimation from neutron and X-ray measurements have been published. Many of the recently published algorithms rely on modelling the unknown strain field as a Gaussian Process (GP) - a probabilistic machine-learning technique. Thus far, GP-based algorithms have assumed a high degree of smoothness and continuity in the unknown strain field. In this paper, we propose three modifications to the GP approach to improve performance, primarily when this is not the case (e.g. for high-gradient or discontinuous fields); hyperparameter optimisation using k-fold cross-validation, a radial basis function approximation scheme, and gradient-based placement of these functions. △ Less

Submitted 8 July, 2020; originally announced July 2020.

Linearly Constrained Neural Networks

Authors: Johannes Hendriks, Carl Jidling, Adrian Wills, Thomas Schön

Abstract: We present a novel approach to modelling and learning vector fields from physical systems using neural networks that explicitly satisfy known linear operator constraints. To achieve this, the target function is modelled as a linear transformation of an underlying potential field, which is in turn modelled by a neural network. This transformation is chosen such that any prediction of the target fun… ▽ More We present a novel approach to modelling and learning vector fields from physical systems using neural networks that explicitly satisfy known linear operator constraints. To achieve this, the target function is modelled as a linear transformation of an underlying potential field, which is in turn modelled by a neural network. This transformation is chosen such that any prediction of the target function is guaranteed to satisfy the constraints. The approach is demonstrated on both simulated and real data examples. △ Less

Submitted 27 April, 2021; v1 submitted 4 February, 2020; originally announced February 2020.

Neutron Diffraction Strain Tomography: Demonstration and Proof-of-Concept

Authors: A. W. T. Gregg, J. N. Hendriks, C. M. Wensrich, V. Luzin, A. Wills

Abstract: Recently, a number of reconstruction algorithms have been presented for residual strain tomography from Bragg-edge neutron transmission measurements. In this paper, we examine whether strain tomography can also be achieved from diffraction measurements. We outline the proposed method and develop a suitable reconstruction algorithm. This technique is demonstrated in simulation and a proof-of-concep… ▽ More Recently, a number of reconstruction algorithms have been presented for residual strain tomography from Bragg-edge neutron transmission measurements. In this paper, we examine whether strain tomography can also be achieved from diffraction measurements. We outline the proposed method and develop a suitable reconstruction algorithm. This technique is demonstrated in simulation and a proof-of-concept experiment is carried out where the strain field in an axisymmetric sample is reconstructed and validated against conventional diffraction strain scans. △ Less

Submitted 17 July, 2019; v1 submitted 18 June, 2019; originally announced June 2019.

Tomographic Reconstruction of Triaxial Strain Fields from Bragg-Edge Neutron Imaging

Authors: J. N. Hendriks, A. W. T. Gregg, R. R. Jackson, C. M. Wensrich, A. Wills, A. S. Tremsin, T. Shinohara, V. Luzin, O. Kirstein

Abstract: This paper presents a proof-of-concept demonstration of triaxial strain tomography from Bragg-edge neutron imaging within a three-dimensional sample. Bragg-edge neutron transmission can provide high-resolution images of the average through thickness strain within a polycrystalline material. This poses an associated rich tomography problem which seeks to reconstruct the full triaxial strain field f… ▽ More This paper presents a proof-of-concept demonstration of triaxial strain tomography from Bragg-edge neutron imaging within a three-dimensional sample. Bragg-edge neutron transmission can provide high-resolution images of the average through thickness strain within a polycrystalline material. This poses an associated rich tomography problem which seeks to reconstruct the full triaxial strain field from these images. The presented demonstration is an important step towards solving this problem, and towards a technique capable of studying the residual strain and stress within engineering components. A Gaussian process based approach is used that ensures the reconstruction satisfies equilibrium and known boundary conditions. This approach is demonstrated experimentally on a non-trivial steel sample with use of the RADEN instrument at the Japan Proton Accelerator Research Complex. Validation of the reconstruction is provided by comparison with conventional strain scans from the KOWARI constant-wavelength strain diffractometer at the Australian Nuclear Science and Technology Organisation and simulations via finite element analysis. △ Less

Submitted 28 November, 2019; v1 submitted 20 June, 2019; originally announced June 2019.

Journal ref: Phys. Rev. Materials 3, 113803 (2019)

Neutron diffraction strain tomography: 2D axisymmetric sample geometry

Authors: V. Luzin, A. W. T. Gregg, J. N. Hendriks, C. M. Wensrich

Abstract: We consider a method for neutron residual strain/stress analysis combining features of transmission strain tomography (e.g. through Braggs edge imaging) and neutron diffraction techniques. Analogous to transmission strain tomography, our approach observes integrals of strain along the path of a beam, however, rather than transmitted beams, we observe a diffracted beam. The practical feasibility of… ▽ More We consider a method for neutron residual strain/stress analysis combining features of transmission strain tomography (e.g. through Braggs edge imaging) and neutron diffraction techniques. Analogous to transmission strain tomography, our approach observes integrals of strain along the path of a beam, however, rather than transmitted beams, we observe a diffracted beam. The practical feasibility of neutron diffraction tomography is demonstrated in case of a 2D axisymmetric sample where the reconstruction of the stress field is determined from the measurement of a strain profile. The reconstruction is compared to a set of measurements made using a traditional neutron stress scanning technique in order to validate the new method. Similar strain accuracy was achieved by the new technique within a reasonable measurement time. The practical and theoretical challenges regarding the technique are also discussed. △ Less

Submitted 16 June, 2019; originally announced June 2019.

Neutron Transmission Strain Tomography for Non-Constant Stress-Free Lattice Spacing

Authors: J. N. Hendriks, C. Jidling, T. B. Schön, A. Wills, C. M. Wensrich, E. H. Kisi

Abstract: Recently, several algorithms for strain tomography from energy-resolved neutron transmission measurements have been proposed. These methods assume that the stress-free lattice spacing $d_0$ is a known constant limiting their application to the study of stresses generated by manufacturing and loading methods that do not alter this parameter. In this paper, we consider the more general problem of jo… ▽ More Recently, several algorithms for strain tomography from energy-resolved neutron transmission measurements have been proposed. These methods assume that the stress-free lattice spacing $d_0$ is a known constant limiting their application to the study of stresses generated by manufacturing and loading methods that do not alter this parameter. In this paper, we consider the more general problem of jointly reconstructing the strain and $d_0$ fields. A method for solving this inherently non-linear problem is presented that ensures the estimated strain field satisfies equilibrium and can include knowledge of boundary conditions. This method is tested on a simulated data set with realistic noise levels, demonstrating that it is possible to jointly reconstruct $d_0$ and the strain field. △ Less

Submitted 18 July, 2019; v1 submitted 15 May, 2019; originally announced May 2019.

Comments: Journal article, 14 pages, 5 figures

Journal ref: Nuclear instruments and methods in physics research section B, 456:64-73, 2019

A Bayesian Approach to Triaxial Strain Tomography from High-energy X-ray Diffraction

Authors: J. N. Hendriks, C. M. Wensrich, A. Wills

Abstract: Diffraction of high-energy X-rays produced at synchrotron sources can provide rapid strain measurements, with high spatial resolution, and good penetrating power. With an uncollimated diffracted beam, through thickness averages of strain can be measured using this technique, which poses an associated rich tomography problem. This paper proposes a Gaussian process (GP) model for three-dimensional s… ▽ More Diffraction of high-energy X-rays produced at synchrotron sources can provide rapid strain measurements, with high spatial resolution, and good penetrating power. With an uncollimated diffracted beam, through thickness averages of strain can be measured using this technique, which poses an associated rich tomography problem. This paper proposes a Gaussian process (GP) model for three-dimensional strain fields satisfying static equilibrium and an accompanying algorithm for tomographic reconstruction of strain fields from high-energy X-ray diffraction. We present numerical evidence that this method can achieve triaxial strain tomography in three-dimensions using only a single axis of rotation. The method builds upon recent work where the GP approach was used to reconstruct two-dimensional strain fields from neutron based measurements. A demonstration is provided from simulated data, showing the method is capable of rejecting realistic levels of Gaussian noise. △ Less

Submitted 4 March, 2020; v1 submitted 5 March, 2019; originally announced March 2019.

Tomographic Reconstruction of Two-Dimensional Residual Strain Fields from Bragg-Edge Neutron Imaging

Authors: Alexander Gregg, Johannes Hendriks, Christopher Wensrich, Adrian Wills, Anton Tremsin, Vladimir Luzin, Takenao Shinohara, Oliver Kirstein, Michael Meylan, Erich Kisi

Abstract: Bragg-edge strain imaging from energy-resolved neutron transmission measurements poses an interesting tomography problem. The solution to this problem will allow the reconstruction of detailed triaxial stress and strain distributions within polycrystalline solids from sets of Bragg-edge strain images. Work over the last decade has provided some solutions for a limited number of special cases. In t… ▽ More Bragg-edge strain imaging from energy-resolved neutron transmission measurements poses an interesting tomography problem. The solution to this problem will allow the reconstruction of detailed triaxial stress and strain distributions within polycrystalline solids from sets of Bragg-edge strain images. Work over the last decade has provided some solutions for a limited number of special cases. In this paper, we provide a general approach to reconstruction of an arbitrary system based on a least squares process constrained by equilibrium. This approach is developed in two- dimensions before being demonstrated experimentally on two samples using the RADEN instrument at the J-PARC spallation neutron source in Japan. Validation of the resulting reconstructions is provided through a comparison to conventional constant wavelength strain measurements carried out on the KOWARI engineering diffractometer within ANSTO in Australia. The paper concludes with a discussion on the range of problems to be addressed in a three-dimensional implementation. △ Less

Submitted 19 August, 2018; originally announced August 2018.

Journal ref: Phys. Rev. Applied 10, 064034 (2018)

Robust Inference of Two-Dimensional Strain Fields from Diffraction-based Measurements

Authors: J. N. Hendriks, C. M. Wensrich, A. Wills, V Luzin, A. W. T Gregg

Abstract: Diffraction-based methods have become an invaluable tool for the detailed assessment of residual strain and stress within experimental mechanics. These methods typically measure a component of the average strain within a gauge volume. It is common place to treat these measurements as point measurements and to interpolate and extrapolate their values over the region of interest. Such interpolations… ▽ More Diffraction-based methods have become an invaluable tool for the detailed assessment of residual strain and stress within experimental mechanics. These methods typically measure a component of the average strain within a gauge volume. It is common place to treat these measurements as point measurements and to interpolate and extrapolate their values over the region of interest. Such interpolations are not guaranteed to satisfy the physical properties of equilibrium and applied loading conditions. In this paper, we provide a numerically robust algorithm for inferring two dimensional, biaxial strain fields over a region of interest from diffraction-based measurements that satisfies equilibrium and any known loading conditions. By correctly treating the measurements as gauge volume averages rather than point-wise the algorithm has better performance when large gauge volumes and subsequently shorter beam-times are used. This algorithm is demonstrated on simulation and experimental data and compared to natural neighbour interpolation with linear extrapolation and is shown to provide a more accurate strain field. △ Less

Submitted 21 February, 2019; v1 submitted 19 August, 2018; originally announced August 2018.

Journal ref: Nuclear instruments and methods in physics research section B, 444:80-90, 2019

Implementation of Traction Constraints in Bragg-edge Neutron Transmission Strain Tomography

Authors: J. N. Hendriks, A. W. T. Gregg, C. M. Wensrich, W. Wills

Abstract: Several recent methods for tomographic reconstruction of stress and strain fields from Bragg-edge neutron strain images have been proposed in the literature. This paper presents an extension of a previously demonstrated approach based on Gaussian Process regression which enforces equilibrium in the method. This extension incorporates knowledge of boundary conditions, primarily boundary tractions,… ▽ More Several recent methods for tomographic reconstruction of stress and strain fields from Bragg-edge neutron strain images have been proposed in the literature. This paper presents an extension of a previously demonstrated approach based on Gaussian Process regression which enforces equilibrium in the method. This extension incorporates knowledge of boundary conditions, primarily boundary tractions, into the reconstruction process. This is shown to increase the rate of convergence and is more tolerant of systematic errors that may be present in experimental measurements. An exact expression for a central calculation in this method is also provided which avoids the need for the approximation scheme that was previously used. Convergence of this method for simulated data is compared to existing approaches and a reconstruction from experimental data is provided. Validation of the results to conventional constant wavelength strain measurements and comparison to prior methods shows a significant improvement. △ Less

Submitted 25 September, 2019; v1 submitted 20 May, 2018; originally announced May 2018.

Journal ref: Strain, 55(5):e12325, 2019

Probabilistic modelling and reconstruction of strain

Authors: Carl Jidling, Johannes Hendriks, Niklas Wahlström, Alexander Gregg, Thomas B. Schön, Christopher Wensrich, Adrian Wills

Abstract: This paper deals with modelling and reconstruction of strain fields, relying upon data generated from neutron Bragg-edge measurements. We propose a probabilistic approach in which the strain field is modelled as a Gaussian process, assigned a covariance structure customised by incorporation of the so-called equilibrium constraints. The computational complexity is significantly reduced by utilising… ▽ More This paper deals with modelling and reconstruction of strain fields, relying upon data generated from neutron Bragg-edge measurements. We propose a probabilistic approach in which the strain field is modelled as a Gaussian process, assigned a covariance structure customised by incorporation of the so-called equilibrium constraints. The computational complexity is significantly reduced by utilising an approximation scheme well suited for the problem. We illustrate the method on simulations and real data. The results indicate a high potential and can hopefully inspire the concept of probabilistic modelling to be used within other tomographic applications as well. △ Less

Submitted 5 November, 2018; v1 submitted 10 February, 2018; originally announced February 2018.

Bragg-Edge Elastic Strain Tomography for in situ Systems from Energy-Resolved Neutron Transmission Imaging

Authors: J. N. Hendriks, A. W. T. Gregg, C. M. Wensrich, A. S. Tremsin, T. Shinohara, M. Meylan, E. H. Kisi, V. Luzin, O. Kirsten

Abstract: Technological developments in high resolution time-of-flight neutron detectors have raised the prospect of tomographic reconstruction of elastic strain fields from Bragg-edge strain images. This approach holds the potential to provide a unique window into the full triaxial stress field within solid samples. While general tomographic reconstruction from these images has been shown to be ill-posed,… ▽ More Technological developments in high resolution time-of-flight neutron detectors have raised the prospect of tomographic reconstruction of elastic strain fields from Bragg-edge strain images. This approach holds the potential to provide a unique window into the full triaxial stress field within solid samples. While general tomographic reconstruction from these images has been shown to be ill-posed, an injective link between measurements and boundary deformations exists for systems subject to in situ applied loads in the absence of residual stress. Recent work has provided an algorithm to achieve tomographic reconstruction for this class of mechanical system. This letter details an experimental proof-of-concept for this algorithm involving the full reconstruction of a biaxial strain field within a non-trivial steel sample. This work was carried out on the RADEN energy resolved neutron imaging instrument within the Japan Proton Accelerator Research Complex, with validation through Digital Image Correlation and constant wavelength neutron strain scans. △ Less

Submitted 7 July, 2019; v1 submitted 11 August, 2017; originally announced August 2017.

Journal ref: Phys. Rev. Materials 1, 053802 (2017)

Scaling Population Cycles of Herbivores and Carnivores

Authors: Christian Mulder, A. Jan Hendriks

Abstract: Periodicity in population dynamics is a fundamental issue. In addition to current species-specific analyses, allometry facilitates understanding of limit cycles amongst different species. So far, body-size regressions have been derived for the oscillation period of the population densities of warm-blooded species, in particular herbivores. Here, we extend the allometric analysis to other clades, a… ▽ More Periodicity in population dynamics is a fundamental issue. In addition to current species-specific analyses, allometry facilitates understanding of limit cycles amongst different species. So far, body-size regressions have been derived for the oscillation period of the population densities of warm-blooded species, in particular herbivores. Here, we extend the allometric analysis to other clades, allowing for a comparison between the obtained slopes and intercepts. The oscillation periods were derived from databases and original studies to cover a broad range of conditions and species. Then, values were related to specific body size by regression analysis. For different groups of herbivorous species, the oscillation period increased as a function of individual mass as a power law with exponents of 0.11-0.27. The intercepts of the resulting linear regressions indicated that cycle times for equally-sized species increased from homeotherms up to invertebrates. Overall, cycle times for predators did not scale to body size. Implications for these differences were addressed in the light of intra- and interspecific delays. △ Less

Submitted 22 April, 2010; originally announced April 2010.

Comments: This research was partly supported by a Research Network Programme of the European Science Foundation on body size and ecosystem dynamics (SIZEMIC)