-
Wavefront sensing with a Gradient Phase Filter
Authors:
F. Henault,
Y. Feng,
J. -J. Correia,
L. Schreiber,
A. Spang
Abstract:
Wavefront sensors have now become core components in the fields of metrology of optical systems, biomedical optics, and adaptive optics systems for astronomy. However, none of the designs used or proposed so far achieve simultaneously a high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to those of modern laser-interferometers. This paper present…
▽ More
Wavefront sensors have now become core components in the fields of metrology of optical systems, biomedical optics, and adaptive optics systems for astronomy. However, none of the designs used or proposed so far achieve simultaneously a high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to those of modern laser-interferometers. This paper presents an improved wavefront sensor concept that reaches both previous goals. This device named Crossed-sine phase sensor (CSPS) is based on a fully transparent gradient phase filter (GPF) placed at an intermediate location between the virtual pupil and image planes of the tested optics. The theoretical principle of the sensor is described in Fourier optics formalism. Numerical simulations confirm that a measurement accuracy of Lambda/100 RMS is achievable. The CSPS also offers the advantages of being quasi-achromatic and working on spatially or spectrally extended, natural or artificial light sources
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Optimizing the concentration ratio of multi-faceted focusing heliostats
Authors:
F. Henault
Abstract:
This technical note aims at optimizing the concentration ratio of multi-faceted focusing heliostats implemented into a solar tower power plant. The ideal shape of a heliostat located off-axis in the field is known to be the local section of a fictitious paraboloïd whose parameters are varying continuously with the Sun angular position. We describe an optimization procedure applicable to those heli…
▽ More
This technical note aims at optimizing the concentration ratio of multi-faceted focusing heliostats implemented into a solar tower power plant. The ideal shape of a heliostat located off-axis in the field is known to be the local section of a fictitious paraboloïd whose parameters are varying continuously with the Sun angular position. We describe an optimization procedure applicable to those heliostats. The flux densities formed at the solar receiver and the achievable concentrating ratios are computed using an improved convolution algorithm. It is shown that the optimized heliostat shape can produce typical concentration gains of approximately 10%, even when the heliostats reflect the Sun under large incidence angles.
△ Less
Submitted 11 August, 2023;
originally announced October 2023.
-
Remote Measurement of Heliostat Reflectivity with the Backward Gazing Procedure
Authors:
Francois Henault
Abstract:
Concentrated solar power is a promising technique enabling renewable energy production with large scale solar power plants in the near future. Estimating quantitatively the reflectivity of a solar concentrator is a major issue, since it has a significant impact on the flux distribution formed on the solar receiver. Moreover, it is desirable that the mirrors can be measured during operation in orde…
▽ More
Concentrated solar power is a promising technique enabling renewable energy production with large scale solar power plants in the near future. Estimating quantitatively the reflectivity of a solar concentrator is a major issue, since it has a significant impact on the flux distribution formed on the solar receiver. Moreover, it is desirable that the mirrors can be measured during operation in order to evaluate environmental factors such as day night thermal cycles or soiling and ageing effects at the reflective surfaces. For that purpose, we used a backward gazing method that was originally developed to measure mirror shape and misalignment errors. The method operates in quasi real-time without disturbing the heat production process. It was successfully tested at a solar tower power plant in France. Its basic principle consists in acquiring four simultaneous images of a Sun-tracking heliostat, captured from different observation points located near the thermal receiver. The images are then processed with a minimization algorithm allowing the determination of mirror slopes errors. In this communication, it is shown that the algorithm also allows one to get quantitative reflectivity maps at the surface of the heliostat. The measurement is fully remote and is used to evaluate surface reflectivity that depends on optical coatings quality and soiling. Preliminary results obtained with a Themis heliostat are presented. They show that reflectivity measurements can be carried out within repeatability about 10 percent Peak-to-Valley (PTV) and 1 percent RMS. Ways to improving these numbers are discussed in the paper
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
The crossed-sine wavefront sensor: first tests and results
Authors:
Laura Schreiber,
Yan Feng,
Alain Spang,
Francois Henault,
Jean-Jacques Correia,
Eric Stadler,
David Mouillet
Abstract:
The crossed-sine wavefront sensor (WFS) is a pupil plane wavefront sensor that measures the first derivatives of the wavefront. It is made by three main components: a gradient transmission filter (GTF) built from a product of sine functions rotated by 45 degrees around the optical axis, a 2x2 mini-lens array (MLA) at the focus of the tested optical system and a detector array located on a plane co…
▽ More
The crossed-sine wavefront sensor (WFS) is a pupil plane wavefront sensor that measures the first derivatives of the wavefront. It is made by three main components: a gradient transmission filter (GTF) built from a product of sine functions rotated by 45 degrees around the optical axis, a 2x2 mini-lens array (MLA) at the focus of the tested optical system and a detector array located on a plane conjugated to the pupil. The basic principle consists in acquiring four pupil images simultaneously, each image being observed from different points located behind the GTF. After the simulation work which demonstrated the wavefront reconstruction capability, we are now in the phase of implementation of the prototype in the lab. The crossed-sine WFS could achieve a simultaneous high spatial resolution at the pupil of the tested optics and absolute measurement accuracy comparable to that attained by laser-interferometers. In this paper we introduce seven customized phase masks and make measurements of them.First tests and resultsare demonstrated, based on which we explore the performance of our crossed-sine WFS and make comparisons with that of the laser-interferomete
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
New concepts for calibrating non-common path aberrations in adaptive optics and coronagraph systems
Authors:
Francois Henault
Abstract:
Non Common Path Aberrations (NCPA) are often considered as a critical issue in Adaptive Optics (AO) systems, since they introduce bias errors between real wavefronts propagating to the science detectors and those measured by the Wavefront Sensor (WFS). This is especially true when the AO system is coupled to a coronagraph instrument intended for the discovery and characterization of extra-solar pl…
▽ More
Non Common Path Aberrations (NCPA) are often considered as a critical issue in Adaptive Optics (AO) systems, since they introduce bias errors between real wavefronts propagating to the science detectors and those measured by the Wavefront Sensor (WFS). This is especially true when the AO system is coupled to a coronagraph instrument intended for the discovery and characterization of extra-solar planets, because useful planet signals could be mistaken with residual speckles generated by NCPA. Therefore, compensating for those errors is of prime importance and is already the scope of a few theoretical studies and experimental validations on-sky. This communication presents the conceptual optical design of a pseudo-interferometer arrangement suitable to accurate NCPA calibration, based on two WFS cooperating in real-time. The concept is applicable to both classical imaging and spectroscopy assisted by AO, and to high-contrast coronagraphs searching for habitable extra-solar planets. Practical aspects are discussed, such as the choice of WFS and coronagraph types, or specific requirements on additional hardware components, e.g. dichroic beamsplitters
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
Collimating Slicer for Optical Integral Field Spectroscopy
Authors:
Florence Laurent,
Francois Henault
Abstract:
Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element in a given object field. It is a powerful tool which rearranges the data cube (x, y, lambda) represented by two spatial dimensions defining the field and the spectral decomposition in a detector plane. In IFS, the spatial unit reorganizes the field and the spectral unit is being…
▽ More
Integral Field Spectroscopy (IFS) is a technique that gives simultaneously the spectrum of each spatial sampling element in a given object field. It is a powerful tool which rearranges the data cube (x, y, lambda) represented by two spatial dimensions defining the field and the spectral decomposition in a detector plane. In IFS, the spatial unit reorganizes the field and the spectral unit is being composed of a classical spectrograph.The development of a Collimating Slicer aims at proposing a new type of integral field spectrograph which should be more compact. The main idea is to combine the image slicer with the collimator of the spectrograph, thus mixing the spatial and spectral units. The traditional combination of slicer, pupil and slit elements and the spectrograph collimator is replaced by a new one composed of a slicer and collimator only. In this paper, the state of the art of integral field spectroscopy using image slicers is described. The new system based onto the development of a Collimating Slicer for optical integral field spectroscopy is depicted. First system analysis results and future improvements are discussed. It finally turns out that this new system looks very promising for low resolution spectroscopy.
△ Less
Submitted 25 July, 2016;
originally announced July 2016.
-
Optical design of a multi-resolution, single shot spectrograph
Authors:
Francois Henault,
Florence Laurent
Abstract:
Multi-object or integral field spectrographs are recognized techniques for achieving simultaneous spectroscopic observations of different or extended sky objects with a high multiplex factor. In this communication is described a complementary approach for realizing similar measurements under different spectral resolutions at the same time. We describe the basic principle of this new type of spectr…
▽ More
Multi-object or integral field spectrographs are recognized techniques for achieving simultaneous spectroscopic observations of different or extended sky objects with a high multiplex factor. In this communication is described a complementary approach for realizing similar measurements under different spectral resolutions at the same time. We describe the basic principle of this new type of spectrometer, that is based on the utilization of an optical pupil slicer. An optical design inspired from an already studied instrument is then presented and commented for the sake of illustration. Technical issues about the pupil slicer and diffractive components are also discussed. We finally conclude on the potential advantages and drawbacks of the proposed system.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Experimental demonstration of a crossed cubes nuller for coronagraphy and interferometry
Authors:
Francois Henault,
Brahim Arezki,
Guillaume Bourdarot,
Alain Spang
Abstract:
In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory.…
▽ More
In this communication we present the first experimental results obtained on the Crossed-cubes nuller (CCN), that is a new type of Achromatic phase shifter (APS) based on a pair of crossed beamsplitter cubes. We review the general principle of the CCN, now restricted to two interferometric outputs for achieving better performance, and describe the experimental apparatus developed in our laboratory. It is cheap, compact, and easy to align. The results demonstrate a high extinction rate in monochromatic light and confirm that the device is insensitive to its polarization state. Finally, the first lessons from the experiment are summarized and discussed in view of future space missions searching for extra-solar planets located in the habitable zone, either based on a coronagraphic telescope or a sparse-aperture nulling interferometer
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Imaging and nulling properties of sparse-aperture Fizeau interferometers
Authors:
F. Henault
Abstract:
In this communication are presented rigorous and approximate analytical expressions of the Point Spread Function (PSF) and Field of View (FoV) achievable by multi-aperture Fizeau interferometers, either of the imaging or nulling types. The described formalism can be helpful for dimensioning future space missions in search of habitable extra-solar planets. Herein the characteristics of PSF and FoV…
▽ More
In this communication are presented rigorous and approximate analytical expressions of the Point Spread Function (PSF) and Field of View (FoV) achievable by multi-aperture Fizeau interferometers, either of the imaging or nulling types. The described formalism can be helpful for dimensioning future space missions in search of habitable extra-solar planets. Herein the characteristics of PSF and FoV are derived from simple analytical expressions that are further computed numerically in order to evidence the critical role of pupil re-imaging along the interferometer arms. The formalism is also well suited to simulating pseudo-images generated by a nulling Fizeau interferometer, and numerical computations demonstrate that it is only efficient for very short baselines. Finally, two different designs improving the nulling capacities of such exoplanet observing instruments are briefly presented and discussed
△ Less
Submitted 10 July, 2014;
originally announced July 2014.
-
Cheapest nuller in the world: Crossed beamsplitter cubes
Authors:
F. Henault,
A. Spang
Abstract:
In this communication is described a new type of Achromatic phase shifter (APS) suitable for both nulling interferometry and coronagraphy, based on a couple of crossed beamsplitter cubes, well-suited for equip** future spaceborne instruments searching for extra-solar planets located in a habitable zone. We present the general principle of this APS and discuss possible implementations into a null…
▽ More
In this communication is described a new type of Achromatic phase shifter (APS) suitable for both nulling interferometry and coronagraphy, based on a couple of crossed beamsplitter cubes, well-suited for equip** future spaceborne instruments searching for extra-solar planets located in a habitable zone. We present the general principle of this APS and discuss possible implementations into a nulling coronagraph telescope or into a sparse-aperture interferometer, either of the Fizeau or Michelson type. Expected performance in terms of transmission maps and a preliminary tolerance analysis are also provided. It turns out that the device is cheap, compact, and presents reasonable manufacturing tolerances and costs
△ Less
Submitted 29 August, 2015; v1 submitted 10 July, 2014;
originally announced July 2014.
-
Imaging power of multi-fibered nulling telescopes for extra-solar planet characterization
Authors:
Francois Henault
Abstract:
In this paper are discussed the nulling and imaging properties of monolithic pupil telescopes equipped with a focal plane waveguide array, which could be envisaged as precursor space missions for future nulling interferometers or coronagraphs searching for habitable planets outside of our solar system. Three different concepts of nulling telescopes are reviewed, namely the Super-Resolving Telescop…
▽ More
In this paper are discussed the nulling and imaging properties of monolithic pupil telescopes equipped with a focal plane waveguide array, which could be envisaged as precursor space missions for future nulling interferometers or coronagraphs searching for habitable planets outside of our solar system. Three different concepts of nulling telescopes are reviewed, namely the Super-Resolving Telescope (SRT) having multiple, non-overlap** exit sub-apertures and the Sheared-Pupil Telescope (SPT), either unmasked or masked with a Lyot stop placed at its exit pupil plane. For each case simple theoretical relationships allowing to estimate the nulling rate, Signal-to-Noise Ratio (SNR) and Inner Working Angle (IWA) of the telescope are established or recalled, and numerical simulations are conducted. The preliminary results of this study show that the most promising designs should either be a SRT of high radiometric efficiency associated with an adequate leakage calibration procedure, or a masked SPT with potentially deeper nulling rates but lower SNR, depending on what kind of performance is to be preferred.
△ Less
Submitted 22 July, 2011;
originally announced July 2011.
-
Phase-shifting technique for improving the imaging capacity of sparse-aperture optical interferometers
Authors:
Francois Henault
Abstract:
In this paper, we describe the principle of a multi-aperture interferometer that uses a phase-shifting technique and is suitable for quick, snapshot imaging of astrophysical objects at extreme angular resolution through Fourier inversion. A few advantages of the proposed design are highlighted, among which are radiometric efficiency, Field of View equivalent to those of Fizeau interferometers, and…
▽ More
In this paper, we describe the principle of a multi-aperture interferometer that uses a phase-shifting technique and is suitable for quick, snapshot imaging of astrophysical objects at extreme angular resolution through Fourier inversion. A few advantages of the proposed design are highlighted, among which are radiometric efficiency, Field of View equivalent to those of Fizeau interferometers, and a preliminary calibration procedure allowing characterization of instrumental errors. For large telescope numbers, the proposed design also results in considerable simplification of the optical and mechanical design. Numerical simulations suggest that it should be possible to couple hundreds of telescopes on a single 4K x 4K detector array, using only conventional optical components or emerging technologies.
△ Less
Submitted 24 June, 2011; v1 submitted 12 May, 2011;
originally announced May 2011.
-
PSF and field of view characteristics of imaging and nulling interferometers
Authors:
François Hénault
Abstract:
In this communication are presented some complements to a recent paper entitled "Simple Fourier optics formalism for high angular resolution systems and nulling interferometry", dealing with imaging and nulling capacities of a few types of multi-aperture optical systems. Herein the characteristics of such systems in terms of Point Spread Function (PSF) and Field of View (FoV) are derived from simp…
▽ More
In this communication are presented some complements to a recent paper entitled "Simple Fourier optics formalism for high angular resolution systems and nulling interferometry", dealing with imaging and nulling capacities of a few types of multi-aperture optical systems. Herein the characteristics of such systems in terms of Point Spread Function (PSF) and Field of View (FoV) are derived from simple analytical expressions that are further evaluated numerically for various configurations. We consider successively the general cases of Fizeau and Michelson interferometers, and those of a monolithic pupil, nulling telescope, of a nulling, Sheared-Pupil Telescope (SPT), and of a sparse aperture, Axially Combined Interferometer (ACI). The analytical formalism also allows establishing the exact Object-Image relationships applicable to nulling PSTs or ACIs that are planned for future space missions searching for habitable extra-solar planets.
△ Less
Submitted 1 April, 2010;
originally announced April 2010.
-
Multi-spectral piston sensor for co-phasing giant segmented mirrors and multi-aperture interferometric arrays
Authors:
Francois Henault
Abstract:
This paper presents the optical design of a multi-spectral piston sensor suitable to co-phasing giant segmented mirrors equip** the Future Extremely Large Telescopes (ELTs). The general theory of the sensor is described in detail and numerical simulations have been carried out, demonstrating that direct piston and tip-tilt measurements are feasible within accuracies respectively close to 20 nm…
▽ More
This paper presents the optical design of a multi-spectral piston sensor suitable to co-phasing giant segmented mirrors equip** the Future Extremely Large Telescopes (ELTs). The general theory of the sensor is described in detail and numerical simulations have been carried out, demonstrating that direct piston and tip-tilt measurements are feasible within accuracies respectively close to 20 nm and 10 nano-radians. Those values are compatible with the co-phasing requirements, although the method seems to be perturbed by uncorrected atmospheric seeing
△ Less
Submitted 27 August, 2009;
originally announced August 2009.
-
Simple Fourier optics formalism for high angular resolution systems and nulling interferometry
Authors:
Francois Henault
Abstract:
In this paper are reviewed various designs of advanced, multi-aperture optical systems dedicated to high angular resolution imaging or to the detection of exo-planets by nulling interferometry. A simple Fourier optics formalism applicable to both imaging arrays and nulling interferometers is presented, allowing to derive their basic theoretical relationships as convolution or cross correlation p…
▽ More
In this paper are reviewed various designs of advanced, multi-aperture optical systems dedicated to high angular resolution imaging or to the detection of exo-planets by nulling interferometry. A simple Fourier optics formalism applicable to both imaging arrays and nulling interferometers is presented, allowing to derive their basic theoretical relationships as convolution or cross correlation products suitable for fast and accurate computation. Several unusual designs, such as a super-resolving telescope utilizing a mosaicking observation procedure or a free-flying, axially recombined interferometer are examined, and their performance in terms of imaging and nulling capacity are assessed. In all considered cases, it is found that the limiting parameter is the diameter of the individual telescopes. The entire study is only valid in the frame of first-order geometrical optics and scalar diffraction theory. Furthermore, it is assumed that all entrance sub-apertures are optically conjugated with their associated exit pupils, a particularity inducing an instrumental behavior comparable with those of diffraction gratings.
△ Less
Submitted 27 August, 2009; v1 submitted 24 April, 2009;
originally announced April 2009.
-
Telescope interferometers: an alternative to classical wavefront sensors
Authors:
Francois Henault
Abstract:
Several types of Wavefront Sensors (WFS) are nowadays available in the field of Adaptive Optics (AO). Generally speaking, their basic principle consists in measuring slopes or curvatures of Wavefront Errors (WFE) transmitted by a telescope, subsequently reconstructing WFEs digitally. Such process, however, does not seem to be well suited for evaluating co-phasing or piston errors of future large…
▽ More
Several types of Wavefront Sensors (WFS) are nowadays available in the field of Adaptive Optics (AO). Generally speaking, their basic principle consists in measuring slopes or curvatures of Wavefront Errors (WFE) transmitted by a telescope, subsequently reconstructing WFEs digitally. Such process, however, does not seem to be well suited for evaluating co-phasing or piston errors of future large segmented telescopes in quasi real-time. This communication presents an original, recently proposed technique for direct WFE sensing. The principle of the device, which is named "Telescope-Interferometer" (TI), is based on the addition of a reference optical arm into the telescope pupil plane. Then incident WFEs are deduced from Point Spread Function (PSF) measurements at the telescope focal plane. Herein are described two different types of TIs, and their performance are discussed in terms of intrinsic measurement accuracy and spatial resolution. Various error sources are studied by means of numerical simulations, among which photon noise sounds the most critical. Those computations finally help to define the application range of the TI method in an AO regime, including main and auxiliary telescope diameters and magnitude of the guide star. Some practical examples of optical configurations are also described and commented.
△ Less
Submitted 29 August, 2008;
originally announced August 2008.
-
Computing extinction maps of star nulling interferometers
Authors:
Francois Henault
Abstract:
Herein is discussed the performance of spaceborne nulling interferometers searching for extra-solar planets, in terms of their extinction maps projected on-sky. In particular, it is shown that the designs of Spatial Filtering (SF) and Achromatic Phase Shifter (APS) subsystems, both required to achieve planet detection and characterization, can sensibly affect the nulling maps produced by a simpl…
▽ More
Herein is discussed the performance of spaceborne nulling interferometers searching for extra-solar planets, in terms of their extinction maps projected on-sky. In particular, it is shown that the designs of Spatial Filtering (SF) and Achromatic Phase Shifter (APS) subsystems, both required to achieve planet detection and characterization, can sensibly affect the nulling maps produced by a simple Bracewell interferometer. Analytical relationships involving cross correlation products are provided and numerical simulations are performed, demonstrating marked differences in the aspect of extinction maps and the values of attained fringes contrasts. It is concluded that depending on their basic principles and designs, FS and APS will result in variable capacities for serendipitous discoveries of planets orbiting around their parent star. The mathematical relationships presented in this paper are assumed to be general, i.e. they should apply to other types of multi-apertures nulling interferometers.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
Signal-to-noise ratio of phase sensing telescope interferometers
Authors:
Francois Henault
Abstract:
This paper is the third part of a trilogy dealing with the principles, performance and limitations of what I named "Telescope-Interferometers" (TIs). The basic idea consists in transforming one telescope into a Wavefront Error (WFE) sensing device. This can be achieved in two different ways, namely the off axis and phase-shifting TIs. In both cases the Point-Spread Function (PSF) measured in the…
▽ More
This paper is the third part of a trilogy dealing with the principles, performance and limitations of what I named "Telescope-Interferometers" (TIs). The basic idea consists in transforming one telescope into a Wavefront Error (WFE) sensing device. This can be achieved in two different ways, namely the off axis and phase-shifting TIs. In both cases the Point-Spread Function (PSF) measured in the focal plane of the telescope carries information about the transmitted WFE, which is retrieved by fast and simple algorithms suitable to an Adaptive Optics (AO) regime. Herein are evaluated the uncertainties of both types of TIs, in terms of noise and systematic errors. Numerical models are developed in order to establish the dependence of driving parameters such as useful spectral range, angular size of the observed star, or detector noise on the total WFE measurement error. The latter is found particularly sensitive to photon noise, which rapidly governs the achieved accuracy for telescope diameters higher than 10 m. We study a few practical examples, showing that TI method is applicable to AO systems on telescope diameters ranging from 10 to 50 m, depending on seeing conditions and magnitude of the observed stars. We also discuss the case of a space-borne coronagraph where TI technique provides high sampling of the input WFE map.
△ Less
Submitted 14 February, 2008;
originally announced February 2008.
-
Conceptual design of a phase shifting telescope-interferometer
Authors:
Francois Henault
Abstract:
This paper deals with the theoretical principle and optical design of a phase-shifting telescope-interferometer. What is called a "Telescope-Interferometer" (T-I) is indeed a novel, recently proposed Wavefront Error (WFE) sensing technique, whose basic idea consists in combining the main pupil of a telescope with a second, off-axis reference arm. Then a weak modulation of the Point Spread Functi…
▽ More
This paper deals with the theoretical principle and optical design of a phase-shifting telescope-interferometer. What is called a "Telescope-Interferometer" (T-I) is indeed a novel, recently proposed Wavefront Error (WFE) sensing technique, whose basic idea consists in combining the main pupil of a telescope with a second, off-axis reference arm. Then a weak modulation of the Point Spread Function (PSF) is generated at the focal plane, allowing for direct phase measurements. We propose a notable improvement of the method, inspired from classical principles of phase shifting interferometry. Herein are presented the alternative principle and its achievable measurement accuracy. The technique shows high performance excepted on narrow areas located near the pupil boundary. It is applicable to both ground or space telescopes and is suitable for the co-phasing of segmented mirrors, which is of prime importance in view of future giant telescope projects.
△ Less
Submitted 28 November, 2005;
originally announced November 2005.
-
An analysis of stellar interferometers as wavefront sensors
Authors:
Francois Henault
Abstract:
This paper presents the basic principle and theoretical relationships of an original method allowing to retrieve the Wavefront Errors (WFE) of a ground or space-borne telescope when combining its main pupil with a second, decentered reference optical arm. The measurement accuracy of such a "telescope-interferometer" is then estimated by means of various numerical simulations, demonstrating a hig…
▽ More
This paper presents the basic principle and theoretical relationships of an original method allowing to retrieve the Wavefront Errors (WFE) of a ground or space-borne telescope when combining its main pupil with a second, decentered reference optical arm. The measurement accuracy of such a "telescope-interferometer" is then estimated by means of various numerical simulations, demonstrating a high performance excepted on limited areas near the telescope pupil rim. In particular, it allows direct phase evaluation (thus avoiding the use of first or second-order derivatives), which is of special interest for the co-phasing of segmented mirrors in future giant telescopes projects. We finally define the useful practical domain of the method, which seems to be better suited for periodical diagnostics of space or ground based telescopes, or to real-time scientific observations in some very specific cases (e.g. the central star in extrasolar planets searching instruments).
△ Less
Submitted 25 October, 2005;
originally announced October 2005.
-
Wavefront sensor based on varying transmission filters: theory and expected performance
Authors:
Francois Henault
Abstract:
The use of Wavefront Sensors (WFS) is nowadays fundamental in the field of instrumental optics. This paper discusses the principle of an original and recently proposed new class of WFS. Their principle consists in evaluating the slopes of the wavefront errors by means of varying density filters placed into the image plane of the tested optical system. The device, sometimes called 'optical differ…
▽ More
The use of Wavefront Sensors (WFS) is nowadays fundamental in the field of instrumental optics. This paper discusses the principle of an original and recently proposed new class of WFS. Their principle consists in evaluating the slopes of the wavefront errors by means of varying density filters placed into the image plane of the tested optical system. The device, sometimes called 'optical differentiation WFS' is completed by a digital data-processing system reconstructing the wavefront from the obtained slopes. Various luminous sources of different wavelengths and spectral widths can be employed. The capacities of the method are discussed from the geometrical and Fourier optics points of view, then by means of numerical simulations showing that the ultimate accuracy can be well below lambda/10 and lambda/100 Peak-to-Valley (PTV) and RMS respectively, provided that certain precautions are taken.
△ Less
Submitted 25 October, 2005;
originally announced October 2005.