-
FDTD-based Inverse Design enables f/0.27 flat Microlens Array for Integral Imaging
Authors:
Tina M. Hayward,
Robert Stewart,
Rajesh Menon,
Apratim Majumder
Abstract:
We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70 μm and focal length of only 19 μm in air. The MLA was patterned on one surface of a polymer film via UV casting, such that the focal plane was located on the dista…
▽ More
We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70 μm and focal length of only 19 μm in air. The MLA was patterned on one surface of a polymer film via UV casting, such that the focal plane was located on the distal end of the film (n of polymer ~ 1.47, thickness = 28 μm, effective f/# (NA) inside polymer ~ 0.4 (0.78)). Each microlens focuses incident light at 3 design wavelengths into a focal spot with measured full-width at half-maximum (FWHM) < 1 μm. By placing this MLA directly on a high-resolution print, we demonstrated RGB integral imaging with applications in document security. Compared to refractive MLAs, our diffractive MLA reduces the thickness by > 3X, which is advantageous for manufacturability. Since these multi-level diffractive MLAs are fabricated using UV-casting, they have the potential for low-cost, high-volume manufacturing.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Ultra-compact synthesis of space-time wave packets
Authors:
Murat Yessenov,
Oussama Mhibik,
Lam Mach,
Tina M. Hayward,
Rajesh Menon,
Leonid Glebov,
Ivan Divliansky,
Ayman F. Abouraddy
Abstract:
Space-time wave packets (STWPs) are pulsed fields in which a strictly prescribed association between the spatial and temporal frequencies yields surprising and useful behavior. However, STWPs to date have been synthesized using bulky free-space optical systems that require precise alignment. We describe a compact system that makes use of a novel optical component: a chirped volume Bragg grating th…
▽ More
Space-time wave packets (STWPs) are pulsed fields in which a strictly prescribed association between the spatial and temporal frequencies yields surprising and useful behavior. However, STWPs to date have been synthesized using bulky free-space optical systems that require precise alignment. We describe a compact system that makes use of a novel optical component: a chirped volume Bragg grating that is rotated by 45 degrees with respect to the plane-parallel device facets. By virtue of this grating's unique structure, cascaded gratings resolve and recombine the spectrum without free-space propagation or collimation. We produce STWPs by placing a phase plate that spatially modulates the resolved spectrum between such cascaded gratings, with a device volume of 25x25x8 mm3, which is orders of magnitude smaller than previous arrangements.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
A perspective on physical reservoir computing with nanomagnetic devices
Authors:
Dan A Allwood,
Matthew O A Ellis,
David Griffin,
Thomas J Hayward,
Luca Manneschi,
Mohammad F KH Musameh,
Simon O'Keefe,
Susan Stepney,
Charles Swindells,
Martin A Trefzer,
Eleni Vasilaki,
Guru Venkat,
Ian Vidamour,
Chester Wringe
Abstract:
Neural networks have revolutionized the area of artificial intelligence and introduced transformative applications to almost every scientific field and industry. However, this success comes at a great price; the energy requirements for training advanced models are unsustainable. One promising way to address this pressing issue is by develo** low-energy neuromorphic hardware that directly support…
▽ More
Neural networks have revolutionized the area of artificial intelligence and introduced transformative applications to almost every scientific field and industry. However, this success comes at a great price; the energy requirements for training advanced models are unsustainable. One promising way to address this pressing issue is by develo** low-energy neuromorphic hardware that directly supports the algorithm's requirements. The intrinsic non-volatility, non-linearity, and memory of spintronic devices make them appealing candidates for neuromorphic devices. Here we focus on the reservoir computing paradigm, a recurrent network with a simple training algorithm suitable for computation with spintronic devices since they can provide the properties of non-linearity and memory. We review technologies and methods for develo** neuromorphic spintronic devices and conclude with critical open issues to address before such devices become widely used.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Space-time wave packets propagating a kilometer in air
Authors:
Layton A. Hall,
Miguel A. Romer,
Bryan L. Turo,
Tina M. Hayward,
Rajesh Menon,
Ayman F. Abouraddy
Abstract:
We report on the diffraction-free propagation of space-time wave packets (STWPs) -- a class of propagation-invariant pulsed beams -- for $\sim\!1$ km in an open-air laser range in a low-turbulence scenario. Making use of $\approx\!100$-fs pulses (bandwidth $\sim\!25$ nm) at a wavelength of $\approx\!1$ $μ$m, we construct an STWP with a transverse width of $\approx\!2$ mm that expands to…
▽ More
We report on the diffraction-free propagation of space-time wave packets (STWPs) -- a class of propagation-invariant pulsed beams -- for $\sim\!1$ km in an open-air laser range in a low-turbulence scenario. Making use of $\approx\!100$-fs pulses (bandwidth $\sim\!25$ nm) at a wavelength of $\approx\!1$ $μ$m, we construct an STWP with a transverse width of $\approx\!2$ mm that expands to $\approx\!3$ mm after $\sim\!500$ m, and another that expands from $\approx\!8$ mm to $\approx\!10$ mm after 1 km. The propagation of the STWPs is compared to Gaussian wave packets of the same transverse spatial width and bandwidth. We establish a theoretical model that accounts for the significant factors limiting the STWP propagation distance and suggests the path to further extending this distance.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Design of the ECCE Detector for the Electron Ion Collider
Authors:
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin,
R. Capobianco
, et al. (259 additional authors not shown)
Abstract:
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track…
▽ More
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.
△ Less
Submitted 11 May, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
CORE -- a COmpact detectoR for the EIC
Authors:
CORE Collaboration,
R. Alarcon,
M. Baker,
V. Baturin,
P. Brindza,
S. Bueltmann,
M. Bukhari,
R. Capobianco,
E. Christy,
S. Diehl,
M. Dugger,
R. Dupré,
R. Dzhygadlo,
K. Flood,
K. Gnanvo,
L. Guo,
T. Hayward,
M. Hattawy,
M. Hoballah,
M. Hohlmann,
C. E. Hyde,
Y. Ilieva,
W. W. Jacobs,
K. Joo,
G. Kalicy
, et al. (34 additional authors not shown)
Abstract:
The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracki…
▽ More
The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracking is primarily silicon. Electromagnetic calorimetry is based on the high performance crystals. Ring-imaging Cherenkov detectors provide hadronic particle identification.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept
Authors:
A. Bylinkin,
C. T. Dean,
S. Fegan,
D. Gangadharan,
K. Gates,
S. J. D. Kay,
I. Korover,
W. B. Li,
X. Li,
R. Montgomery,
D. Nguyen,
G. Penman,
J. R. Pybus,
N. Santiesteban,
R. Trotta,
A. Usman,
M. D. Baker,
J. Frantz,
D. I. Glazier,
D. W. Higinbotham,
T. Horn,
J. Huang,
G. Huber,
R. Reed,
J. Roche
, et al. (258 additional authors not shown)
Abstract:
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr…
▽ More
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.
△ Less
Submitted 6 March, 2023; v1 submitted 30 August, 2022;
originally announced August 2022.
-
Alignment of the CLAS12 central hybrid tracker with a Kalman Filter
Authors:
S. J. Paul,
A. Peck,
M. Arratia,
Y. Gotra,
V. Ziegler,
R. De Vita,
F. Bossu,
M. Defurne,
H. Atac,
C. Ayerbe Gayoso,
L. Baashen,
N. A. Baltzell,
L. Barion,
M. Bashkanov,
M. Battaglieri,
I. Bedlinskiy,
B. Benkel,
F. Benmokhtar,
A. Bianconi,
L. Biondo,
A. S. Biselli,
M. Bondi,
S. Boiarinov,
K. Th. Brinkmann,
W. J. Briscoe
, et al. (109 additional authors not shown)
Abstract:
Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors wit…
▽ More
Several factors can contribute to the difficulty of aligning the sensors of tracking detectors, including a large number of modules, multiple types of detector technologies, and non-linear strip patterns on the sensors. All three of these factors apply to the CLAS12 CVT, which is a hybrid detector consisting of planar silicon sensors with non-parallel strips, and cylindrical micromegas sensors with longitudinal and arc-shaped strips located within a 5~T superconducting solenoid. To align this detector, we used the Kalman Alignment Algorithm, which accounts for correlations between the alignment parameters without requiring the time-consuming inversion of large matrices. This is the first time that this algorithm has been adapted for use with hybrid technologies, non-parallel strips, and curved sensors. We present the results for the first alignment of the CLAS12 CVT using straight tracks from cosmic rays and from a target with the magnetic field turned off. After running this procedure, we achieved alignment at the level of 10~$μ$m, and the widths of the residual spectra were greatly reduced. These results attest to the flexibility of this algorithm and its applicability to future use in the CLAS12 CVT and other hybrid or curved trackers, such as those proposed for the future Electron-Ion Collider.
△ Less
Submitted 9 August, 2022;
originally announced August 2022.
-
Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will…
▽ More
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.
△ Less
Submitted 23 July, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Exclusive J/$ψ$ Detection and Physics with ECCE
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the…
▽ More
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider
Authors:
F. Bock,
N. Schmidt,
P. K. Wang,
N. Santiesteban,
T. Horn,
J. Huang,
J. Lajoie,
C. Munoz Camacho,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (263 additional authors not shown)
Abstract:
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key…
▽ More
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider
Authors:
C. Fanelli,
Z. Papandreou,
K. Suresh,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann
, et al. (258 additional authors not shown)
Abstract:
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to…
▽ More
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector.
△ Less
Submitted 19 May, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider
Authors:
J. C. Bernauer,
C. T. Dean,
C. Fanelli,
J. Huang,
K. Kauder,
D. Lawrence,
J. D. Osborn,
C. Paus,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (256 additional authors not shown)
Abstract:
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes…
▽ More
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Manipulating ultracold atoms with a reconfigurable nanomagnetic system of domain walls
Authors:
Adam D. West,
Kevin J. Weatherill,
Thomas J. Hayward,
Paul W. Fry,
Thomas Schrefl,
Mike R. J. Gibbs,
Charles S. Adams,
Dan A. Allwood,
Ifan G. Hughes
Abstract:
The divide between the realms of atomic-scale quantum particles and lithographically-defined nanostructures is rapidly being bridged. Hybrid quantum systems comprising ultracold gas-phase atoms and substrate-bound devices already offer exciting prospects for quantum sensors, quantum information and quantum control. Ideally, such devices should be scalable, versatile and support quantum interaction…
▽ More
The divide between the realms of atomic-scale quantum particles and lithographically-defined nanostructures is rapidly being bridged. Hybrid quantum systems comprising ultracold gas-phase atoms and substrate-bound devices already offer exciting prospects for quantum sensors, quantum information and quantum control. Ideally, such devices should be scalable, versatile and support quantum interactions with long coherence times. Fulfilling these criteria is extremely challenging as it demands a stable and tractable interface between two disparate regimes. Here we demonstrate an architecture for atomic control based on domain walls (DWs) in planar magnetic nanowires that provides a tunable atomic interaction, manifested experimentally as the reflection of ultracold atoms from a nanowire array. We exploit the magnetic reconfigurability of the nanowires to quickly and remotely tune the interaction with high reliability. This proof-of-principle study shows the practicability of more elaborate atom chips based on magnetic nanowires being used to perform atom optics on the nanometre scale.
△ Less
Submitted 5 December, 2011; v1 submitted 2 December, 2011;
originally announced December 2011.
-
Nanomagnetic engineering of the properties of domain wall atom traps
Authors:
Thomas J. Hayward,
Adam D. West,
Kevin J. Weatherill,
Thomas Schrefl,
Ifan G. Hughes,
Dan A. Allwood
Abstract:
We have used the results of micromagnetic simulations to investigate the effects of nanowire geometry and domain wall magnetization structure on the characteristic parameters of magnetic atom traps formed by domain walls in planar ferromagnetic nanowires. It is found that when traps are formed in the near-field of a domain wall both nanowire geometry and wall structure have a substantial effect on…
▽ More
We have used the results of micromagnetic simulations to investigate the effects of nanowire geometry and domain wall magnetization structure on the characteristic parameters of magnetic atom traps formed by domain walls in planar ferromagnetic nanowires. It is found that when traps are formed in the near-field of a domain wall both nanowire geometry and wall structure have a substantial effect on trap frequency and adiabaticity. We also show that in certain regimes a trap's depth depends only on the amplitude of an externally applied rotating magnetic field, thus allowing it to be tuned independently of the trap's other critical parameters.
△ Less
Submitted 16 September, 2011;
originally announced September 2011.
-
A simple model for calculating magnetic nanowire domain wall fringing fields
Authors:
Adam West,
Thomas Hayward,
Kevin Weatherill,
Thomas Schrefl,
Dan Allwood,
Ifan Hughes
Abstract:
We present a new approach to calculating magnetic fringing fields from head-to-head type domain walls in planar magnetic nanowires. In contrast to calculations based on micromagnetically simulated structures the descriptions of the fields are for the most part analytic and thus significantly less time and resource intensive. The models presented begin with an intuitive picture of domain walls, whi…
▽ More
We present a new approach to calculating magnetic fringing fields from head-to-head type domain walls in planar magnetic nanowires. In contrast to calculations based on micromagnetically simulated structures the descriptions of the fields are for the most part analytic and thus significantly less time and resource intensive. The models presented begin with an intuitive picture of domain walls, which is built upon in a phenomenological manner. Comparisons with fields calculated using micromagnetic methods show good quantitative agreement.
△ Less
Submitted 16 September, 2011; v1 submitted 12 April, 2011;
originally announced April 2011.
-
Design and Characterization of a Field-Switchable Nanomagnetic Atom Mirror
Authors:
T. J. Hayward,
A. D. West,
K. J. Weatherill,
P. J. Curran,
P. W. Fry,
P. M. Fundi,
M. R. J. Gibbs,
T. Schrefl,
C. S. Adams,
I. G. Hughes,
S. J. Bending,
D. A. Allwood
Abstract:
We present a design for a switchable nanomagnetic atom mirror formed by an array of 180° domain walls confined within Ni80Fe20 planar nanowires. A simple analytical model is developed which allows the magnetic field produced by the domain wall array to be calculated. This model is then used to optimize the geometry of the nanowires so as to maximize the reflectivity of the atom mirror. We then des…
▽ More
We present a design for a switchable nanomagnetic atom mirror formed by an array of 180° domain walls confined within Ni80Fe20 planar nanowires. A simple analytical model is developed which allows the magnetic field produced by the domain wall array to be calculated. This model is then used to optimize the geometry of the nanowires so as to maximize the reflectivity of the atom mirror. We then describe the fabrication of a nanowire array and characterize its magnetic behavior using magneto-optic Kerr effect magnetometry, scanning Hall probe microscopy and micromagnetic simulations, demonstrating how the mobility of the domain walls allow the atom mirror to be switched "on" and "off" in a manner which would be impossible for conventional designs. Finally, we model the reflection of 87Rb atoms from the atom mirror's surface, showing that our design is well suited for investigating interactions between domain walls and cold atoms.
△ Less
Submitted 10 August, 2010;
originally announced August 2010.
