-
Post-compression of multi-mJ picosecond pulses to few-cycles approaching the terawatt regime
Authors:
Supriya Rajhans,
Esmerando Escoto,
Nikita Khodakovskiy,
Praveen K. Velpula,
Bonaventura Farace,
Uwe Grosse-Wortmann,
Rob J. Shalloo,
Cord L. Arnold,
Kristjan Põder,
Jens Osterhoff,
Wim P. Leemans,
Ingmar Hartl,
Christoph M. Heyl
Abstract:
Advancing ultrafast high-repetition-rate lasers to shortest pulse durations comprising only a few optical cycles while pushing their energy into the multi-millijoule regime opens a route towards terawatt-class peak powers at unprecedented average power. We explore this route via efficient post-compression of high-energy 1.2 ps pulses from an Ytterbium InnoSlab laser to 9.6 fs duration using gas-fi…
▽ More
Advancing ultrafast high-repetition-rate lasers to shortest pulse durations comprising only a few optical cycles while pushing their energy into the multi-millijoule regime opens a route towards terawatt-class peak powers at unprecedented average power. We explore this route via efficient post-compression of high-energy 1.2 ps pulses from an Ytterbium InnoSlab laser to 9.6 fs duration using gas-filled multi-pass cells (MPCs) at a repetition rate of 1 kHz. Employing dual-stage compression with a second MPC stage supporting a close-to-octave-spanning bandwidth enabled by dispersion-matched dielectric mirrors, a record compression factor of 125 is reached at 70% overall efficiency, delivering 6.7 mJ pulses with a peak power of about 0.3 TW. Moreover, we show that post-compression can improve the temporal contrast at picosecond delay by at least one order of magnitude. Our results demonstrate efficient conversion of multi-millijoule picosecond lasers to high-peak-power few-cycle sources, opening up new parameter regimes for laser plasma physics, high energy physics, biomedicine and attosecond science.
△ Less
Submitted 16 June, 2023;
originally announced June 2023.
-
Acousto-Optic Modulation in Ambient Air
Authors:
Yannick Schrödel,
Claas Hartmann,
Tino Lang,
Jiaan Zheng,
Max Steudel,
Matthias Rutsch,
Sarper H. Salman,
Martin Kellert,
Mikhail Pergament,
Thomas Hahn-Jose,
Sven Suppelt,
Jan Helge Dörsam,
Anne Harth,
Wim P. Leemans,
Franz X. Kärtner,
Ingmar Hartl,
Mario Kupnik,
Christoph M. Heyl
Abstract:
Control over intensity, shape, direction, and phase of coherent light is essential in numerous fields, reaching from gravitational wave astronomy over quantum metrology and ultrafast sciences to semi-conductor fabrication. Modern laser optics, however, frequently demands parameter regimes where either the wavelength or the optical power restricts control due to linear absorption, light-induced dam…
▽ More
Control over intensity, shape, direction, and phase of coherent light is essential in numerous fields, reaching from gravitational wave astronomy over quantum metrology and ultrafast sciences to semi-conductor fabrication. Modern laser optics, however, frequently demands parameter regimes where either the wavelength or the optical power restricts control due to linear absorption, light-induced damage or optical nonlinearity. The properties of solid media, upon which most photonic control schemes rely, impose these limitations. We propose to circumvent these constraints using gaseous media tailored by high-intensity ultrasound waves. We demonstrate a first implementation of this approach by deflecting ultrashort laser pulses using ultrasound waves in ambient air, entirely omitting transmissive solid media. At optical peak powers of 20 GW exceeding previous limits of solid-based acousto-optic modulation by about three orders of magnitude, we reach a deflection efficiency greater than 50% while preserving excellent beam quality. Our approach is not limited to laser pulse deflection via acousto-optic modulation: gas-phase photonic schemes controlled by sonic waves can prospectively be translated to various optical methods, e.g., lenses or waveguides, rendering them effectively invulnerable against damage and opening up new spectral regions.
△ Less
Submitted 28 April, 2023; v1 submitted 13 April, 2023;
originally announced April 2023.
-
Few-cycle pulse generation by double-stage hybrid multi-pass multi-plate nonlinear pulse compression
Authors:
Anne-Lise Viotti,
Chen Li,
Gunnar Arisholm,
Lutz Winkelmann,
Ingmar Hartl,
Christoph M. Heyl,
Marcus Seidel
Abstract:
Few-cycle pulses present an essential tool to track ultrafast dynamics in matter and drive strong field effects. To address photon-hungry applications, high average power lasers are used which, however, cannot directly provide sub-100 fs pulse durations. Post-compression of laser pulses by spectral broadening and dispersion compensation is the most efficient method to overcome this limitation. Her…
▽ More
Few-cycle pulses present an essential tool to track ultrafast dynamics in matter and drive strong field effects. To address photon-hungry applications, high average power lasers are used which, however, cannot directly provide sub-100 fs pulse durations. Post-compression of laser pulses by spectral broadening and dispersion compensation is the most efficient method to overcome this limitation. Here, we demonstrate a notably compact setup which turns a 0.1 GW peak power, picosecond laser into a 2.9 GW peak power, 8.2 fs source. The 120-fold pulse duration shortening is accomplished in a two-stage hybrid multi-pass, multi-plate compression setup. To our knowledge, neither shorter pulses, nor higher peak powers have been reported to-date from bulk multi-pass cells alone, manifesting the power of the hybrid approach. It puts, for instance, compact, cost-efficient and high repetition rate attosecond sources within reach.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Ultrafast serrodyne optical frequency translator
Authors:
Prannay Balla,
Henrik Tünnermann,
Sarper H. Salman,
Mingqi Fan,
Skirmantas Alisauskas,
Ingmar Hartl,
Christoph M. Heyl
Abstract:
The serrodyne principle enables shifting the frequency of an electromagnetic signal by applying a linear phase ramp in the time domain [1]. This phenomenon has been exploited to frequency-shift signals in the radiofrequency (RF), microwave and optical region of the electromagnetic spectrum over ranges of up to a few GHz e.g. to analyse the Doppler shift of RF signals, for noise suppression and fre…
▽ More
The serrodyne principle enables shifting the frequency of an electromagnetic signal by applying a linear phase ramp in the time domain [1]. This phenomenon has been exploited to frequency-shift signals in the radiofrequency (RF), microwave and optical region of the electromagnetic spectrum over ranges of up to a few GHz e.g. to analyse the Doppler shift of RF signals, for noise suppression and frequency stabilization [2-9]. Here, we employ this principle to shift the center frequency of high power femtosecond laser pulses over a range of several THz with the help of a nonlinear multi-pass cell. We demonstrate our method experimentally by shifting the central wavelength of a state-of-the-art 75 W frequency comb laser from 1030\,nm to 1060\,nm and to 1000\,nm. Furthermore, we experimentally show that this wavelength shifting technique supports coherence characteristics at the few Hz-level while improving the temporal pulse quality. The technique is generally applicable to wide parameter ranges and different laser systems, enabling efficient wavelength conversion of high-power lasers to spectral regions beyond the gain bandwidth of available laser platforms.
△ Less
Submitted 28 August, 2022;
originally announced August 2022.
-
Self-broadening and self-shift in the $\mathbf{3ν_{2}}$ band of ammonia from mid-infrared-frequency-comb spectroscopy
Authors:
Guang Yang,
Vinicius Silva de Oliveira,
Dominic Laumer,
Christoph M. Heyl,
Andrey Yachmenev,
Ingmar Hartl,
Jochen Küpper
Abstract:
We report the broadband absorption spectrum of the $3ν_{2}$ band of $^{14}$NH$_{3}$ near 4 $μm$. The data were recorded using a mid-infrared frequency comb coupled to a homebuilt Fourier-transform spectrometer with a resolution of 0.00501 $cm^{-1}$. Line positions, line intensities, self-broadening, and self-shift parameters for six rovibrational lines were determined at room temperature ($T=296$…
▽ More
We report the broadband absorption spectrum of the $3ν_{2}$ band of $^{14}$NH$_{3}$ near 4 $μm$. The data were recorded using a mid-infrared frequency comb coupled to a homebuilt Fourier-transform spectrometer with a resolution of 0.00501 $cm^{-1}$. Line positions, line intensities, self-broadening, and self-shift parameters for six rovibrational lines were determined at room temperature ($T=296$ K). Comparison with HITRAN 2016 shows good agreement at improved precision. The high precision and the rapid tunability of our experiment enables advanced fast spectroscopy of molecular gases.
△ Less
Submitted 17 January, 2023; v1 submitted 9 May, 2022;
originally announced May 2022.
-
Temporal quality of post-compressed pulses at large compression factors
Authors:
Esmerando Escoto,
Anne-Lise Viotti,
Skirmantas Alisauskas,
Henrik Tünnermann,
Ingmar Hartl,
Christoph M. Heyl
Abstract:
Post-compression of ultra-short laser pulses via self-phase modulation is routinely employed for the generation of laser pulses with optical bandwidths reaching far beyond the laser gain limitations. While high compression factors can be routinely achieved, the compressed pulses typically suffer from temporal quality degradation. We numerically and experimentally analyze the deterioration of diffe…
▽ More
Post-compression of ultra-short laser pulses via self-phase modulation is routinely employed for the generation of laser pulses with optical bandwidths reaching far beyond the laser gain limitations. While high compression factors can be routinely achieved, the compressed pulses typically suffer from temporal quality degradation. We numerically and experimentally analyze the deterioration of different measures of temporal quality with increasing compression factor and show how appropriate dispersion management and cascading of the post-compression process can be employed to limit the impact of this effect. The demonstrated saturation of pulse quality degradation at large compression factors puts novel femtosecond laser architectures based on post-compressed pico- or even nanosecond laser systems in sight.
△ Less
Submitted 15 January, 2022;
originally announced January 2022.
-
Factor 30 pulse compression by hybrid multi-pass multi-plate spectral broadening
Authors:
Marcus Seidel,
Prannay Balla,
Chen Li,
Gunnar Arisholm,
Lutz Winkelmann,
Ingmar Hartl,
Christoph M. Heyl
Abstract:
As Ultrafast laser technology advances towards ever higher peak and average powers, generating sub-50 fs pulses from laser architectures that exhibit best power-scaling capabilities remains a major challenge. Here, we present a very compact and highly robust method to compress 1.24 ps pulses to 39 fs by means of only a single spectral broadening stage which neither requires vacuum parts nor custom…
▽ More
As Ultrafast laser technology advances towards ever higher peak and average powers, generating sub-50 fs pulses from laser architectures that exhibit best power-scaling capabilities remains a major challenge. Here, we present a very compact and highly robust method to compress 1.24 ps pulses to 39 fs by means of only a single spectral broadening stage which neither requires vacuum parts nor custom-made optics. Our approach is based on the hybridization of the multi-plate continuum and the multi-pass cell spectral broadening techniques. Their combination leads to significantly higher spectral broadening factors in bulk material than what has been reported from either method alone. Moreover, our approach efficiently suppresses adverse features of single-pass bulk spectral broadening. We use a burst mode Yb:YAG laser emitting pulses with 80 MW peak power that are enhanced to more than 1 GW after post-compression. With only 0.19 % rms pulse-to-pulse energy fluctuations, the technique exhibits excellent stability. Furthermore, we have measured state-of-the-art spectral-spatial homogeneity and good beam quality of M$^2 = 1.2$ up to a spectral broadening factor of 30. Due to the method's simplicity, compactness and scalability, it is highly attractive for turning a high-power picosecond laser into an ultrafast light source that generates pulses of only a few tens of femtoseconds duration.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
1 GHz dual-comb spectrometer for fast and broadband measurements
Authors:
Thibault Voumard,
John Darvill,
Thibault Wildi,
Markus Ludwig,
Christian Mohr,
Ingmar Hartl,
Tobias Herr
Abstract:
Dual-frequency comb spectroscopy permits broadband precision spectroscopic measurements with short acquisition time. A dramatic improvement of the maximal spectral bandwidth and the minimal measurement time can be expected when the lasers' pulse repetition rate is increased, owing to a quadratic dependence (Nyquist criterion). Here, we demonstrate a dual-comb system operating at a high repetition…
▽ More
Dual-frequency comb spectroscopy permits broadband precision spectroscopic measurements with short acquisition time. A dramatic improvement of the maximal spectral bandwidth and the minimal measurement time can be expected when the lasers' pulse repetition rate is increased, owing to a quadratic dependence (Nyquist criterion). Here, we demonstrate a dual-comb system operating at a high repetition rate of 1 GHz based on mature, digitally-controlled, low-noise mode-locked lasers. Compared to conventional lower repetition rate ($\sim$100 MHz) oscillators, this represents a 100-fold improvement in terms of the Nyquist criterion, while still providing adequate spectral sampling even for trace gas absorption fingerprints. Two spectroscopy experiments are performed with acquisition parameters not attainable in a 100 MHz system: detection of water vapor absorption around 1375 nm, demonstrating the potential for fast and ambiguity-free broadband operation, and real-time acquisition of narrow gas absorption features across a spectral span of 0.6 THz (600 comb lines) in only 5 $μ$s. Additionally, we show high mutual coherence of the lasers below the Hz-level, generating opportunities for broadband spectroscopy even with low-bandwidth detectors such as mid-infrared, imaging or photo-acoustic detectors.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Ultrafast MHz-rate burst-mode pump-probe laser for the FLASH FEL facility based on nonlinear compression of ps-level pulses from an Yb-amplifier chain
Authors:
Marcus Seidel,
Federico Pressacco,
Oender Akcaalan,
Thomas Binhammer,
John Darvill,
Nagitha Ekanayake,
Maik Frede,
Uwe Grosse-Wortmann,
Michael Heber,
Christoph M. Heyl,
Dmytro Kutnyakhov,
Chen Li,
Christian Mohr,
Jost Müller,
Oliver Puncken,
Harald Redlin,
Nora Schirmel,
Sebastian Schulz,
Angad Swiderski,
Hamed Tavakol,
Henrik Tünnermann,
Caterina Vidoli,
Lukas Wenthaus,
Nils Wind,
Lutz Winkelmann
, et al. (2 additional authors not shown)
Abstract:
The Free-Electron Laser (FEL) FLASH offers the worldwide still unique capability to study ultrafast processes with high-flux, high-repetition rate XUV and soft X-ray pulses. The vast majority of experiments at FLASH are of pump-probe type. Many of them rely on optical ultrafast lasers. Here, a novel FEL facility laser is reported which combines high average power output from Yb:YAG amplifiers with…
▽ More
The Free-Electron Laser (FEL) FLASH offers the worldwide still unique capability to study ultrafast processes with high-flux, high-repetition rate XUV and soft X-ray pulses. The vast majority of experiments at FLASH are of pump-probe type. Many of them rely on optical ultrafast lasers. Here, a novel FEL facility laser is reported which combines high average power output from Yb:YAG amplifiers with spectral broadening in a Herriott-type multi-pass cell and subsequent pulse compression to sub-100 fs durations. Compared to other facility lasers employing optical parametric amplification, the new system comes with significantly improved noise figures, compactness, simplicity and power efficiency. Like FLASH, the optical laser operates with 10 Hz burst repetition rate. The bursts consist of 800 $μ$s long trains of up to 800 ultrashort pulses being synchronized to the FEL with femtosecond precision. In the experimental chamber, pulses with up to 50 $μ$J energy, 60 fs FWHM duration and 1 MHz rate at 1.03 $μ$m wavelength are available and can be adjusted by computer-control. Moreover, nonlinear polarization rotation is implemented to improve laser pulse contrast. First cross-correlation measurements with the FEL at the plane-grating monochromator photon beamline are demonstrated, exhibiting the suitability of the laser for user experiments at FLASH.
△ Less
Submitted 14 May, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Compact, all-PM fiber integrated and alignment-free ultrafast Yb:fiber NALM laser with sub-femtosecond timing jitter
Authors:
Yuxuan Ma,
Sarper H. Salman,
Chen Li,
Christoph Mahnke,
Yi Hua,
Stefan Droste,
Jakob Fellinger,
Aline S. Mayer,
Oliver H. Heckl,
Christoph M. Heyl,
Ingmar Hartl
Abstract:
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design paramet…
▽ More
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design parameters were determined by numerically simulating the pulse evolution in the oscillator and by analyzing their impact on the laser performance. Experimentally, we achieved an 88 fs compressed pulse duration with sub-fs timing jitter at 54 MHz repetition rate and 51 mW of output power with 5.5 * 10-5 [20 Hz, 1 MHz] integrated relative intensity noise (RIN). Furthermore, we demonstrate tight phase-locking of the laser's carrier-envelope offset frequency (fceo) to a stable radio frequency (RF) reference and of one frequency comb tooth to a stable optical reference at 291 THz.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Flexible all-PM NALM Yb:fiber laser design for frequency comb applications: operation regimes and their noise properties
Authors:
Aline S. Mayer,
Wilfrid Grosinger,
Jakob Fellinger,
Georg Winkler,
Lukas W. Perner,
Stefan Droste,
Sarper H. Salman,
Chen Li,
Christoph M. Heyl,
Ingmar Hartl,
Oliver H. Heckl
Abstract:
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a…
▽ More
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a 78-MHz configuration at different intracavity group delay dispersion (GDD) values ranging from anomalous (-0.035 ps$^2$) to normal (+0.015 ps$^2$). We put a particular focus on the characterization of the intensity noise as well as the free-running linewidth of the carrier-envelope-offset (CEO) frequency as a function of the different operation regimes. We observe that operation points far from the spontaneous emission peak of Yb (~1030 nm) and close to zero intracavity dispersion can be found, where the influence of pump noise is strongly suppressed. For such an operation point, we show that a CEO linewidth of less than 10-kHz at 1 s integration can be obtained without any active stabilization.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Post-compression of picosecond pulses into the few-cycle regime
Authors:
Prannay Balla,
Ammar Bin Wahid,
Ivan Sytcevich,
Chen Guo,
Anne-Lise Viotti,
Laura Silletti,
Andrea Cartella,
Skirmantas Alisauskas,
Hamed Tavakol,
Uwe Grosse-Wortmann,
Arthur Schönberg,
Marcus Seidel,
Andrea Trabattoni,
Bastian Manschwetus,
Tino Lang,
Francesca Calegari,
Arnaud Couairon,
Anne L'Huillier,
Cord L. Arnold,
Ingmar Hartl,
Christoph M. Heyl
Abstract:
In this work, we demonstrate post-compression of 1.2 picosecond laser pulses to 13 fs via gas-based multi-pass spectral broadening. Our results yield a single-stage compression factor of about 40 at 200 W in-burst average power and a total compression factor >90 at reduced power. The employed scheme represents a route towards compact few-cycle sources driven by industrial-grade Yb:YAG lasers at hi…
▽ More
In this work, we demonstrate post-compression of 1.2 picosecond laser pulses to 13 fs via gas-based multi-pass spectral broadening. Our results yield a single-stage compression factor of about 40 at 200 W in-burst average power and a total compression factor >90 at reduced power. The employed scheme represents a route towards compact few-cycle sources driven by industrial-grade Yb:YAG lasers at high average power.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Letter of Intent for the LUXE Experiment
Authors:
H. Abramowicz,
M. Altarelli,
R. Aßmann,
T. Behnke,
Y. Benhammou,
O. Borysov,
M. Borysova,
R. Brinkmann,
F. Burkart,
K. Büßer,
O. Davidi,
W. Decking,
N. Elkina,
H. Harsh,
A. Hartin,
I. Hartl,
B. Heinemann,
T. Heinzl,
N. TalHod,
M. Hoffmann,
A. Ilderton,
B. King,
A. Levy,
J. List,
A. R. Maier
, et al. (12 additional authors not shown)
Abstract:
This Letter of Intent describes LUXE (Laser Und XFEL Experiment), an experiment that aims to use the high-quality and high-energy electron beam of the European XFEL and a powerful laser. The scientific objective of the experiment is to study quantum electrodynamics processes in the regime of strong fields. High-energy electrons, accelerated by the European XFEL linear accelerator, and high-energy…
▽ More
This Letter of Intent describes LUXE (Laser Und XFEL Experiment), an experiment that aims to use the high-quality and high-energy electron beam of the European XFEL and a powerful laser. The scientific objective of the experiment is to study quantum electrodynamics processes in the regime of strong fields. High-energy electrons, accelerated by the European XFEL linear accelerator, and high-energy photons, produced via Bremsstrahlung of those beam electrons, colliding with a laser beam shall experience an electric field up to three times larger than the Schwinger critical field (the field at which the vacuum itself is expected to become unstable and spark with spontaneous creation of electron-positron pairs) and access a new regime of quantum physics. The processes to be investigated, which include nonlinear Compton scattering and nonlinear Breit-Wheeler pair production, are relevant to a variety of phenomena in Nature, e.g. in the areas of astrophysics and collider physics and complement recent results in atomic physics. The setup requires in particular the extraction of a minute fraction of the electron bunches from the European XFEL accelerator, the installation of a powerful laser with sophisticated diagnostics, and an array of precision detectors optimised to measure electrons, positrons and photons. Physics sensitivity projections based on simulations are also provided.
△ Less
Submitted 2 September, 2019;
originally announced September 2019.
-
Tunable dual-comb from an all-polarization-maintaining single-cavity dual-color Yb:fiber laser
Authors:
Jakob Fellinger,
Aline S. Mayer,
Georg Winkler,
Wilfrid Grosinger,
Gar-Wing Truong,
Stefan Droste,
Chen Li,
Christoph M. Heyl,
Ingmar Hartl,
Oliver H. Heckl
Abstract:
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions…
▽ More
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatially overlap** the two arms on a simple photodiode then generates a down-converted radio frequency comb. The difference in repetition rates between the two pulse trains and hence the line spacing of the down-converted comb can easily be tuned in this setup. This feature allows for a flexible adjustment of the tradeoff between non-aliasing bandwidth vs. measurement time in spectroscopy applications. Furthermore, we show that by fine-tuning the center-wavelengths of the two pulse trains, we are able to shift the down-converted frequency comb along the radio-frequency axis. The usability of this dual-comb setup is demonstrated by measuring the transmission of two different etalons while the laser is completely free-running.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Intensity Noise Optimization of a Mid-Infrared Frequency Comb Difference Frequency Generation Source
Authors:
Vinicius Silva de Oliveira,
Axel Ruehl,
Piotr Masłowski,
Ingmar Hartl
Abstract:
We experimentally demonstrate in a difference-frequency generation mid-infrared frequency comb source the effect of temporal overlap between pump- and signal- pulse to the relative intensity noise (RIN) of the idler pulse. When scanning the temporal delay between our 130 fs long signal- and pump pulses, we observe a RIN minimum with a 3 dB width of 20 fs delay and an RIN increase of 20 dB in 40 fs…
▽ More
We experimentally demonstrate in a difference-frequency generation mid-infrared frequency comb source the effect of temporal overlap between pump- and signal- pulse to the relative intensity noise (RIN) of the idler pulse. When scanning the temporal delay between our 130 fs long signal- and pump pulses, we observe a RIN minimum with a 3 dB width of 20 fs delay and an RIN increase of 20 dB in 40 fs delay at the edges of this minimum. We also demonstrate active long-term stabilization of the mid-infrared frequency comb source to the temporal overlap setting corresponding to the lowest RIN operation point by an on-line RIN-detector and active feedback control of the pump-signal- pulse delay. This active stabilization set-up allowed us to dramatically increase the signal-to-noise ratio of mid-infrared absorption spectra.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Transverse and longitudinal characterization of electron beams using interaction with optical near-fields
Authors:
Martin Kozák,
Joshua McNeur,
Kenneth J. Leedle,
Huiyang Deng,
Norbert Schönenberger,
Axel Ruehl,
Ingmar Hartl,
Heinar Hoogland,
Ronald Holzwarth,
James S. Harris,
Robert L. Byer,
Peter Hommelhoff
Abstract:
We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields co…
▽ More
We demonstrate an experimental technique for both transverse and longitudinal characterization of bunched femtosecond free electron beams. The operation principle is based on monitoring of the current of electrons that obtained an energy gain during the interaction with the synchronized optical near-field wave excited by femtosecond laser pulses. The synchronous accelerating/decelerating fields confined to the surface of a silicon nanostructure are characterized using a highly focused sub-relativistic electron beam. Here the transverse spatial resolution of 450 nm and femtosecond temporal resolution achievable by this technique are demonstrated.
△ Less
Submitted 29 November, 2016;
originally announced November 2016.
-
Operation regimes, gain dynamics and highly stable operation points of Ho:YLF regenerative amplifiers
Authors:
Peter Kroetz,
Axel Ruehl,
Anne-Laure Calendron,
Gourab Chatterjee,
Huseyin Cankaya,
Krishna Murari,
Franz X. Kaertner,
Ingmar Hartl,
R. J. Dwayne Miller
Abstract:
We present a comprehensive study of laser pulse amplification with respect to operation regimes, gain dynamics, and highly stable operation points of Ho:YLF regenerative amplifiers (RAs). The findings are expected to be more generic than for this specific case. Operation regimes are distinguished with respect to pulse energy and the appearance of pulse instability, and are studied as a function of…
▽ More
We present a comprehensive study of laser pulse amplification with respect to operation regimes, gain dynamics, and highly stable operation points of Ho:YLF regenerative amplifiers (RAs). The findings are expected to be more generic than for this specific case. Operation regimes are distinguished with respect to pulse energy and the appearance of pulse instability, and are studied as a function of the repetition rate, seed energy, and pump intensity. The corresponding gain dynamics are presented, identifying highly stable operation points related to high gain build -up during pum** and high gain depletion during pulse amplification. These operation points are studied numerically and experimentally as a function of several parameters, thereby achieving, for our Ho:YLF RA, highly stable output pulses with measured fluctuations of only 0.19% (standard deviation).
△ Less
Submitted 30 September, 2016; v1 submitted 24 August, 2016;
originally announced August 2016.
-
Elements of a dielectric laser accelerator
Authors:
Joshua McNeur,
Martin Kozák,
Norbert Schönenberger,
Kenneth J. Leedle,
Huiyang Deng,
Andrew Ceballos,
Heinar Hoogland,
Axel Ruehl,
Ingmar Hartl,
Ronald Holzwarth,
Olav Solgaard,
James S. Harris,
Robert L. Byer,
Peter Hommelhoff
Abstract:
The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale…
▽ More
The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale dielectric structures whose near fields can synchronously accelerate charged particles - have demonstrated high-gradient acceleration with a variety of laser wavelengths, materials, and electron beam parameters, potentially enabling miniaturized accelerators and table-top coherent x-ray sources. To realize a useful (i.e. scalable) DLA, crucial developments have remained: concatenation of components including sustained phase synchronicity to reach arbitrary final energies as well as deflection and focusing elements to keep the beam well collimated along the design axis. Here, all of these elements are demonstrated with a subrelativistic electron beam. In particular, by creating two interaction regions via illumination of a nanograting with two spatio-temporally separated pulsed laser beams, we demonstrate a phase-controlled doubling of electron energy gain from 0.7 to 1.4 keV (2.5 percent to 5 percent of the initial beam energy) and through use of a chirped grating geometry, we overcome the dephasing limit of 25 keV electrons, increasing their energy gains to a laser power limited 10 percent of their initial energy. Further, optically-driven transverse focusing of the electron beam with focal lengths below 200 microns is achieved via a parabolic grating geometry. These results lay the cornerstone for future miniaturized phase synchronous vacuum-structure-based accelerators.
△ Less
Submitted 5 June, 2016; v1 submitted 26 April, 2016;
originally announced April 2016.
-
Optical gating and streaking of free-electrons with attosecond precision
Authors:
Martin Kozak,
Joshua McNeur,
Kenneth J. Leedle,
Norbert Schoenenberger,
Alex Ruehl,
Ingmar Hartl,
James S. Harris,
Robert L. Byer,
Peter Hommelhoff
Abstract:
In this paper we present proof of principle experiments of an optical gating concept for free electrons. We demonstrate a temporal resolution of 1.2+-0.3 fs via energy and transverse momentum modulation as a function of time. The scheme is based on the synchronous interaction between electrons and the near-field mode of a dielectric nano-grating excited by a femtosecond laser pulse with an optical…
▽ More
In this paper we present proof of principle experiments of an optical gating concept for free electrons. We demonstrate a temporal resolution of 1.2+-0.3 fs via energy and transverse momentum modulation as a function of time. The scheme is based on the synchronous interaction between electrons and the near-field mode of a dielectric nano-grating excited by a femtosecond laser pulse with an optical period duration of 6.5 fs. The sub-optical cycle resolution demonstrated here is promising for use in laser-driven streak cameras for attosecond temporal characterization of bunched particle beams as well as time-resolved experiments with free-electron beams. We expect that 10 as temporal resolution will be achieved in the near future using such a scheme.
△ Less
Submitted 14 December, 2015;
originally announced December 2015.
-
Overcoming Bifurcation Instability in High-Repetition-Rate Ho:YLF Regenerative Amplifiers
Authors:
Peter Kroetz,
Axel Ruehl,
Gourab Chatterjee,
Anne-Laure Calendron,
Krishna Murari,
Huseyin Cankaya,
Peng Li,
Franz X. Kaertner,
Ingmar Hartl,
R. J. Dwayne Miller
Abstract:
We demonstrate a Ho:YLF regenerative amplifier (RA) overcoming bifurcation instability and consequently achieving high extraction energies of 6.9 mJ at a repetition rate of 1 kHz with pulse-to-pulse fluctuations of 1.1%. Measurements of the output pulse energy, corroborated by numerical simulations, identify an operation point that allows high-energy pulse extraction at a minimum noise level. Comp…
▽ More
We demonstrate a Ho:YLF regenerative amplifier (RA) overcoming bifurcation instability and consequently achieving high extraction energies of 6.9 mJ at a repetition rate of 1 kHz with pulse-to-pulse fluctuations of 1.1%. Measurements of the output pulse energy, corroborated by numerical simulations, identify an operation point that allows high-energy pulse extraction at a minimum noise level. Complete suppression of the onset of bifurcation was achieved by gain saturation after each pum** cycle in the Ho:YLF crystal via lowering the repetition rate and cooling the crystal. Even for moderate cooling, a significant temperature dependence of the Ho:YLF RA performance was observed.
△ Less
Submitted 23 October, 2015; v1 submitted 7 October, 2015;
originally announced October 2015.
-
Low Noise, tunable Ho:fiber Soliton Oscillator for Ho:YLF Amplifier Seeding
Authors:
Peng Li,
Axel Ruehl,
Colleen Bransley,
Ingmar Hartl
Abstract:
We present a passively mode-locked, tunable soliton Ho:fiber ring oscillator, optimized for seeding of Ho:YLF amplifiers. The oscillator is independently tunable in central wavelength and spectral width from 2040 nm to 2070 nm and from 5 nm to 10 nm, respectively. At all settings the pulse energy within the soliton is around 800 pJ. The soliton oscillator was optimized to fully meets the spectral…
▽ More
We present a passively mode-locked, tunable soliton Ho:fiber ring oscillator, optimized for seeding of Ho:YLF amplifiers. The oscillator is independently tunable in central wavelength and spectral width from 2040 nm to 2070 nm and from 5 nm to 10 nm, respectively. At all settings the pulse energy within the soliton is around 800 pJ. The soliton oscillator was optimized to fully meets the spectral requirements for seeding Ho:YLF amplifiers. Its Kelly sidebands are located outside the amplifier gain spectrum, resulting in a train of about 1 ps long pedestal-free pulses with relative intensity noise (RIN) of only 0.13 % RMS when integrated from 1 Hz to Nyquist frequency.
△ Less
Submitted 30 September, 2015;
originally announced September 2015.
-
Widely-tunable mid-IR frequency comb source based on difference frequency generation
Authors:
Axel Ruehl,
Alessio Gambetta,
Ingmar Hartl,
Martin E. Fermann,
Kjeld S. E. Eikema,
Marco Marangoni
Abstract:
We report on a mid-infrared frequency comb source of unprecedented tunability covering the entire 3-10 μm molecular fingerprint region. The system is based on difference frequency generation in a GaSe crystal pumped by a 151 MHz Yb:fiber frequency comb. The process was seeded with Raman shifted solitons generated in a highly nonlinear suspended-core fiber with the same source. Average powers up to…
▽ More
We report on a mid-infrared frequency comb source of unprecedented tunability covering the entire 3-10 μm molecular fingerprint region. The system is based on difference frequency generation in a GaSe crystal pumped by a 151 MHz Yb:fiber frequency comb. The process was seeded with Raman shifted solitons generated in a highly nonlinear suspended-core fiber with the same source. Average powers up to 1.5 mW were achieved at 4.7 μm wavelength.
△ Less
Submitted 12 March, 2012;
originally announced March 2012.
-
Full phase stabilization of a Yb:fiber femtosecond frequency comb via high-bandwidth transducers
Authors:
C. Benko,
A. Ruehl,
M. J. Martin,
K. S. E. Eikema,
M. E. Fermann,
I. Hartl,
J. Ye
Abstract:
We present full phase stabilization of an amplified Yb:fiber femtosecond frequency comb using an intra-cavity electro-optic modulator and an acousto-optic modulator. These transducers provide high servo bandwidths of 580 kHz and 250 kHz for frep and fceo, producing a robust and low phase noise fiber frequency comb. The comb was self-referenced with an f - 2f interferometer and phase locked to an u…
▽ More
We present full phase stabilization of an amplified Yb:fiber femtosecond frequency comb using an intra-cavity electro-optic modulator and an acousto-optic modulator. These transducers provide high servo bandwidths of 580 kHz and 250 kHz for frep and fceo, producing a robust and low phase noise fiber frequency comb. The comb was self-referenced with an f - 2f interferometer and phase locked to an ultra-stable optical reference used for the JILA Sr optical clock at 698 nm, exhibiting 0.21 rad and 0.47 rad of integrated phase errors (over 1 mHz - 1 MHz) respectively. Alternatively, the comb was locked to two optical references at 698 nm and 1064 nm, obtaining 0.43 rad and 0.14 rad of integrated phase errors respectively.
△ Less
Submitted 23 February, 2012;
originally announced February 2012.
-
Direct Frequency Comb Spectroscopy in the Extreme Ultraviolet
Authors:
Arman Cingoz,
Dylan C. Yost,
Thomas K. Allison,
Axel Ruehl,
Martin E. Fermann,
Ingmar Hartl,
Jun Ye
Abstract:
Development of the optical frequency comb has revolutionised metrology and precision spectroscopy due to its ability to provide a precise and direct link between microwave and optical frequencies. A novel application of frequency comb technology that leverages both the ultrashort duration of each laser pulse and the exquisite phase coherence of a train of pulses is the generation of frequency comb…
▽ More
Development of the optical frequency comb has revolutionised metrology and precision spectroscopy due to its ability to provide a precise and direct link between microwave and optical frequencies. A novel application of frequency comb technology that leverages both the ultrashort duration of each laser pulse and the exquisite phase coherence of a train of pulses is the generation of frequency combs in the extreme ultraviolet (XUV) via high harmonic generation (HHG) in a femtosecond enhancement cavity. Until now, this method has lacked sufficient average power for applications, which has also hampered efforts to observe phase coherence of the high-repetition rate pulse train produced in the extremely nonlinear HHG process. Hence, the existence of a frequency comb in the XUV has not been confirmed. We have overcome both challenges. Here, we present generation of >200 μW per harmonic reaching 50 nm, and the observation of single-photon spectroscopy signals for both an argon transition at 82 nm and a neon transition at 63 nm. The absolute frequency of the argon transition has been determined via direct frequency comb spectroscopy. The resolved 10-MHz linewidth of the transition, limited by the transverse temperature of the argon atoms, is unprecedented in this spectral region and places a stringent upper limit on the linewidth of individual comb teeth. Due to the lack of cw lasers, these frequency combs are currently the only promising avenue towards extending ultrahigh precision spectroscopy to below the 100-nm spectral region with a wide range of applications that include spectroscopy of electronic transitions in molecules, experimental tests of bound state and many body quantum electrodynamics in He+ and He, development of next-generation "nuclear" clocks, and searches for spatial and temporal variation of fundamental constants using the enhanced sensitivity of highly charged ions.
△ Less
Submitted 8 September, 2011;
originally announced September 2011.
-
Ultra-Broadband Coherent Supercontinuum Frequency Comb
Authors:
Axel Ruehl,
Michael. J. Martin,
Kevin C. Cossel,
Lisheng Chen,
Hugh McKay,
Brian Thomas,
Craig Benko,
Liang Dong,
John M. Dudley,
Martin E. Fermann,
Ingmar Hartl,
Jun Ye
Abstract:
We present detailed studies of the coherence properties of an ultra-broadband super-continuum, enabled by a new approach involving continuous wave laser sources to independently probe both the amplitude and phase noise quadratures across the entire spectrum. The continuum coherently spans more than 1.5 octaves, supporting Hz-level comparison of ultrastable lasers at 698 nm and 1.54 μm. We present…
▽ More
We present detailed studies of the coherence properties of an ultra-broadband super-continuum, enabled by a new approach involving continuous wave laser sources to independently probe both the amplitude and phase noise quadratures across the entire spectrum. The continuum coherently spans more than 1.5 octaves, supporting Hz-level comparison of ultrastable lasers at 698 nm and 1.54 μm. We present the first numerical simulation of the accumulated comb coherence in the limit of many pulses, in contrast to the single-pulse level, with systematic experimental verification. The experiment and numerical simulations reveal the presence of quantum-seeded broadband amplitude noise without phase coherence degradation, including the discovery of a dependence of the super-continuum coherence on the fiber fractional Raman gain.
△ Less
Submitted 10 May, 2011;
originally announced May 2011.
-
Broadband Phase-Noise Suppression in a Yb-Fiber Frequency Comb
Authors:
A. Cingoz,
D. C. Yost,
T. K. Allison,
A. Ruehl,
M. E. Fermann,
I. Hartl,
J. Ye
Abstract:
We report a simple technique to suppress high frequency phase noise of a Yb-based fiber optical frequency comb using an active intensity noise servo. Out-of-loop measurements of the phase noise using an optical heterodyne beat with a continuous wave (cw) laser show suppression of phase noise by \geq7 dB out to Fourier frequencies of 100 kHz with a unity-gain crossing of -700 kHz. These results are…
▽ More
We report a simple technique to suppress high frequency phase noise of a Yb-based fiber optical frequency comb using an active intensity noise servo. Out-of-loop measurements of the phase noise using an optical heterodyne beat with a continuous wave (cw) laser show suppression of phase noise by \geq7 dB out to Fourier frequencies of 100 kHz with a unity-gain crossing of -700 kHz. These results are enabled by the strong correlation between the intensity and phase noise of the laser. Detailed measurements of intensity and phase noise spectra, as well as transfer functions, reveal that the dominant phase and intensity noise contribution above -100 kHz is due to amplified spontaneous emission (ASE) or other quantum noise sources.
△ Less
Submitted 29 January, 2011;
originally announced January 2011.
-
Mid-Infrared Frequency Comb Fourier Transform Spectrometer
Authors:
Florian Adler,
Piotr Masłowski,
Aleksandra Foltynowicz,
Kevin C. Cossel,
Travis C. Briles,
Ingmar Hartl,
Jun Ye
Abstract:
Optical frequency-comb-based-high-resolution spectrometers offer enormous potential for spectroscopic applications. Although various implementations have been demonstrated, the lack of suitable mid-infrared comb sources has impeded explorations of molecular fingerprinting. Here we present for the first time a frequency-comb Fourier transform spectrometer operating in the 2100-to-3700-cm-1 spectral…
▽ More
Optical frequency-comb-based-high-resolution spectrometers offer enormous potential for spectroscopic applications. Although various implementations have been demonstrated, the lack of suitable mid-infrared comb sources has impeded explorations of molecular fingerprinting. Here we present for the first time a frequency-comb Fourier transform spectrometer operating in the 2100-to-3700-cm-1 spectral region that allows fast and simultaneous acquisitions of broadband absorption spectra with up to 0.0056 cm-1 resolution. We demonstrate part-per-billion detection limits in 30 seconds of integration time for various important molecules including methane, ethane, isoprene, and nitrous oxide. Our system enables precise concentration measurements even in gas mixtures that exhibit continuous absorption bands, and it allows detection of molecules at levels below the noise floor via simultaneous analysis of multiple spectral features. This system represents a near real-time, high-resolution, high-bandwidth mid-infrared spectrometer which is ready to replace traditional Fourier transform spectrometers for many applications in trace gas detection, atmospheric science, and medical diagnostics.
△ Less
Submitted 24 September, 2010; v1 submitted 5 July, 2010;
originally announced July 2010.
-
Phase-stabilized, 1.5-W frequency comb at 2.8 to 4.8 micron
Authors:
Florian Adler,
Kevin C. Cossel,
Michael J. Thorpe,
Ingmar Hartl,
Martin E. Fermann,
Jun Ye
Abstract:
We present a high-power optical parametric oscillator-based frequency comb in the mid-infrared wavelength region using periodically poled lithium niobate. The system is synchronously pumped by a 10-W femtosecond Yb:fiber laser centered at 1.07 um and is singly resonant for the signal. The idler (signal) wavelength can be continuously tuned from 2.8 to 4.8 um (1.76 to 1.37 um) with a simultaneous…
▽ More
We present a high-power optical parametric oscillator-based frequency comb in the mid-infrared wavelength region using periodically poled lithium niobate. The system is synchronously pumped by a 10-W femtosecond Yb:fiber laser centered at 1.07 um and is singly resonant for the signal. The idler (signal) wavelength can be continuously tuned from 2.8 to 4.8 um (1.76 to 1.37 um) with a simultaneous bandwidth as high as 0.3 um and a maximum average idler output power of 1.50 W. We also demonstrate the performance of the stabilized comb by recording the heterodyne beat with a narrow-linewidth diode laser. This OPO is an ideal source for frequency comb spectroscopy in the mid-IR.
△ Less
Submitted 11 February, 2009;
originally announced February 2009.