-
Results and Limits of Time Division Multiplexing for the BICEP Array High Frequency Receivers
Authors:
S. Fatigoni,
P. A. R. Ade,
Z. Ahmed,
M. Amiri,
D. Barkats,
R. Basu Thakur,
C. A. Bischoff,
D. Beck,
J. J. Bock,
V. Buza,
J. Cheshire,
J. Connors,
J. Cornelison,
M. Crumrine,
A. J. Cukierman,
E. V. Denison,
M. I. Dierickx,
L. Duband,
M. Eiben,
J. P. Filippini,
A. Fortes,
M. Gao,
C. Giannakopoulos,
N. Goeckner-Wald,
D. C. Goldfinger
, et al. (62 additional authors not shown)
Abstract:
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the…
▽ More
Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in multiplexing. Once fully populated, each of the two BICEP Array high frequency receivers, observing at 150GHz and 220/270GHz, will have 7776 TES detectors tiled on the focal plane. The constraints set by these two receivers required a redesign of the warm readout electronics. The new version of the standard Multi Channel Electronics, developed and built at the University of British Columbia, is presented here for the first time. BICEP Array operates Time Division Multiplexing readout technology to the limits of its capabilities in terms of multiplexing rate, noise and crosstalk, and applies them in rigorously demanding scientific application requiring extreme noise performance and systematic error control. Future experiments like CMB-S4 plan to use TES bolometers with Time Division/SQUID-based readout for an even larger number of detectors.
△ Less
Submitted 24 October, 2023; v1 submitted 16 October, 2023;
originally announced October 2023.
-
L1 and off Sun-Earth line visible-light imaging of Earth-directed CMEs: An analysis of inconsistent observations
Authors:
Richard A. Harrison,
Jackie A. Davies,
David Barnes,
Christian Möstl
Abstract:
The efficacy of coronal mass ejection (CME) observations as a key input to space weather forecasting is explored by comparing on and off Sun-Earth line observations from the ESA/NASA SOHO and NASA STEREO spacecraft. A comparison is made of CME catalogues based on L1 coronagraph imagery and off Sun-Earth line coronagraph and heliospheric imager (HI) observations, for the year 2011. Analysis reveals…
▽ More
The efficacy of coronal mass ejection (CME) observations as a key input to space weather forecasting is explored by comparing on and off Sun-Earth line observations from the ESA/NASA SOHO and NASA STEREO spacecraft. A comparison is made of CME catalogues based on L1 coronagraph imagery and off Sun-Earth line coronagraph and heliospheric imager (HI) observations, for the year 2011. Analysis reveals inconsistencies in the identification of a number of potentially Earth-directed CMEs. The catalogues reflect our ability to identify and characterise CMEs, so any discrepancies can impact our prediction of Earth-directed CMEs. We show that 15 CMEs, which were observed by STEREO, that had estimated directions compatible with Earth-directed events, had no identified halo/partial halo counterpart listed in the L1 coronagraph CME catalogue. In-situ data confirms that for 9 of these there was a consistent L1 Interplanetary CME (ICME). The number of such "discrepant" events is significant compared to the number of ICMEs recorded at L1 in 2011, stressing the need to address space weather monitoring capabilities, particularly with the inclusion of off Sun-Earth line observation. While the study provides evidence that some halo CMEs are simply not visible in near-Earth coronagraph imagery, there is evidence that some halo CMEs viewed from L1 are compromised by preceding CME remnants or the presence of multiple-CMEs. This underlines (1) the value of multiple vantage point CME observation, and (2) the benefit of off Sun-Earth line platform heliospheric imaging, and coronagraph imaging, for the efficient identification and tracking of Earth-directed events.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Engineered entropic forces allow ultrastrong dynamical backaction
Authors:
Andreas Sawadsky,
Raymond A. Harrison,
Glen I. Harris,
Walter W. Wasserman,
Yasmine L. Sfendla,
Warwick P. Bowen,
Christopher G. Baker
Abstract:
When confined within an optical cavity, light can exert strong radiation pressure forces. Combined with dynamical backaction, this enables important processes such as laser cooling, and applications ranging from precision sensors to quantum memories and interfaces. However, the magnitude of radiation pressure forces is constrained by the energy mismatch between photons and phonons. Here, we overco…
▽ More
When confined within an optical cavity, light can exert strong radiation pressure forces. Combined with dynamical backaction, this enables important processes such as laser cooling, and applications ranging from precision sensors to quantum memories and interfaces. However, the magnitude of radiation pressure forces is constrained by the energy mismatch between photons and phonons. Here, we overcome this barrier using entropic forces arising from the absorption of light. We show that entropic forces can exceed the radiation pressure force by eight orders of magnitude, and demonstrate this using a superfluid helium third-sound resonator. We develop a framework to engineer the dynamical backaction from entropic forces, applying it to achieve phonon lasing with a threshold three orders of magnitude lower than previous work. Our results present a pathway to exploit entropic forces in quantum devices, and to study nonlinear fluid phenomena such as turbulence and solitons.
△ Less
Submitted 11 August, 2022; v1 submitted 11 August, 2022;
originally announced August 2022.
-
Modeling Bike Share Station Activity: Effects of Nearby Businesses and Jobs on Trips to and from Stations
Authors:
Xize Wang,
Greg Lindsey,
Jessica E. Schoner,
Andrew Harrison
Abstract:
The purpose of this research is to identify correlates of bike station activity for Nice Ride Minnesota, a bike share system in Minneapolis - St. Paul Metropolitan Area in Minnesota. We obtained the number of trips to and from each of the 116 bike share stations operating in 2011 from Nice Ride Minnesota. Data for independent variables included in models come from a variety of sources; including t…
▽ More
The purpose of this research is to identify correlates of bike station activity for Nice Ride Minnesota, a bike share system in Minneapolis - St. Paul Metropolitan Area in Minnesota. We obtained the number of trips to and from each of the 116 bike share stations operating in 2011 from Nice Ride Minnesota. Data for independent variables included in models come from a variety of sources; including the 2010 US Census, the Metropolitan Council, a regional planning agency, and the cities of Minneapolis and St. Paul. We use log-linear and negative binomial regression models to evaluate the marginal effects of these factors on average daily station trips. Our models have high goodness of fit, and each of 13 independent variables is significant at the 10% level or higher. The number of trips at Nice Ride stations is associated with neighborhood socio demographics (i.e., age and race), proximity to the central business district, proximity to water, accessibility to trails, distance to other bike share stations, and measures of economic activity. Analysts can use these results to optimize bike share operations, locate new stations, and evaluate the potential of new bike share programs.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Cryogenic and hermetically sealed packaging of photonic chips for optomechanics
Authors:
W. W. Wasserman,
R. A. Harrison,
G. I. Harris,
A. Sawadsky,
Y. L. Sfendla,
W. P. Bowen,
C. G. Baker
Abstract:
We demonstrate a hermetically sealed packaging system for integrated photonic devices at cryogenic temperatures with plug-and-play functionality. This approach provides the ability to encapsulate a controlled amount of gas into the optical package allowing helium to be used as a heat-exchange gas to thermalize photonic devices, or condensed into a superfluid covering the device. This packaging sys…
▽ More
We demonstrate a hermetically sealed packaging system for integrated photonic devices at cryogenic temperatures with plug-and-play functionality. This approach provides the ability to encapsulate a controlled amount of gas into the optical package allowing helium to be used as a heat-exchange gas to thermalize photonic devices, or condensed into a superfluid covering the device. This packaging system was tested using a silicon-on-insulator slot waveguide resonator which fills with superfluid $^4$He below the transition temperature. To optimize the fiber-to-chip optical integration 690 tests were performed by thermally cycling optical fibers bonded to various common photonic chip substrates (silicon, silicon oxide and HSQ) with a range of glues (NOA 61, NOA 68, NOA 88, NOA 86H and superglue). This showed that NOA 86H (a UV curing optical adhesive with a latent heat catalyst) provided the best performance under cryogenic conditions for all the substrates tested. The technique is relevant to superfluid optomechanics experiments, as well as quantum photonics and quantum optomechanics applications.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
The evolution of cooperation: an evolutionary advantage of individuals impedes the evolution of the population
Authors:
Xiaoliang Wang,
Andrew Harrison
Abstract:
Range expansion is a universal process in biological systems, and therefore plays a part in biological evolution. Using a quantitative individual-based method based on the stochastic process, we identify that enhancing the inherent self-proliferation advantage of cooperators relative to defectors is a more effective channel to promote the evolution of cooperation in range expansion than weakening…
▽ More
Range expansion is a universal process in biological systems, and therefore plays a part in biological evolution. Using a quantitative individual-based method based on the stochastic process, we identify that enhancing the inherent self-proliferation advantage of cooperators relative to defectors is a more effective channel to promote the evolution of cooperation in range expansion than weakening the benefit acquisition of defectors from cooperators. With this self-proliferation advantage, cooperators can rapidly colonize virgin space and establish spatial segregation more readily, which acts like a protective shield to further promote the evolution of cooperation in return. We also show that lower cell density and migration rate have a positive effect on the competition of cooperators with defectors. Biological evolution is based on competition between individuals and should therefore favor selfish behaviors. However, we observe a counterintuitive phenomenon that the evolution of a population is impeded by the fitness-enhancing chemotactic movement of individuals. This highlights a conflict between the interests of the individual and the population. The short-sighted selfish behavior of individuals may not be that favored in the competition between populations. Such information provides important implications for the handling of cooperation.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
Chemical principles of instability and self-organization in reacting and diffusive systems
Authors:
Xiaoliang Wang,
Andrew Harrison
Abstract:
How patterns and structures undergo symmetry breaking and self-organize within biological systems from initially homogeneous states is a key issue for biological development. The activator-inhibitor (AI) mechanism, derived from reaction-diffusion (RD) models, has been widely believed to be the elementary mechanism for biological pattern formation. This mechanism generally requires activators to be…
▽ More
How patterns and structures undergo symmetry breaking and self-organize within biological systems from initially homogeneous states is a key issue for biological development. The activator-inhibitor (AI) mechanism, derived from reaction-diffusion (RD) models, has been widely believed to be the elementary mechanism for biological pattern formation. This mechanism generally requires activators to be self-enhanced and diffuse more slowly than inhibitors. Here, we identify the instability sources of biological systems and derive the self-organization conditions through solving eigenvalues (dispersion relation) of the generalized RD model for two chemicals. We show that both the single AI mechanisms with long-range inhibition and activation are enough to self-organize into fully-expressed domains without the involvement of the inhibitor-inhibitor (II) mechanism, through singly enhancing the difference in self-proliferation rates of activators and inhibitors or weakening the coupling degree between them. When cross diffusion involves, both the self-enhancement and the difference in diffusion coefficients of chemicals are no longer necessary for self-organization, and the patterning mechanism can be extended to semi-inhibitor and II mechanisms. However, we show that the single activator-activator (AA) mechanism is generally unable to self-organize, even if biological domain growth is additionally involved. Moreover, adding an II system after an AI one can produce discrete and bi-stable patterns. We also observe that a higher dimensional space can solely alter the patterning principles derived from a lower dimensional space, which may be due to the instability driven by the higher degree of spatial freedom. Such results provide new insights into biological pattern formation.
△ Less
Submitted 28 October, 2022; v1 submitted 9 January, 2022;
originally announced January 2022.
-
Comprehensive and Clinically Accurate Head and Neck Organs at Risk Delineation via Stratified Deep Learning: A Large-scale Multi-Institutional Study
Authors:
Dazhou Guo,
Jia Ge,
Xianghua Ye,
Senxiang Yan,
Yi Xin,
Yuchen Song,
Bing-shen Huang,
Tsung-Min Hung,
Zhuotun Zhu,
Ling Peng,
Yan** Ren,
Rui Liu,
Gong Zhang,
Mengyuan Mao,
Xiaohua Chen,
Zhongjie Lu,
Wenxiang Li,
Yuzhen Chen,
Lingyun Huang,
**g Xiao,
Adam P. Harrison,
Le Lu,
Chien-Yu Lin,
Dakai **,
Tsung-Ying Ho
Abstract:
Accurate organ at risk (OAR) segmentation is critical to reduce the radiotherapy post-treatment complications. Consensus guidelines recommend a set of more than 40 OARs in the head and neck (H&N) region, however, due to the predictable prohibitive labor-cost of this task, most institutions choose a substantially simplified protocol by delineating a smaller subset of OARs and neglecting the dose di…
▽ More
Accurate organ at risk (OAR) segmentation is critical to reduce the radiotherapy post-treatment complications. Consensus guidelines recommend a set of more than 40 OARs in the head and neck (H&N) region, however, due to the predictable prohibitive labor-cost of this task, most institutions choose a substantially simplified protocol by delineating a smaller subset of OARs and neglecting the dose distributions associated with other OARs. In this work we propose a novel, automated and highly effective stratified OAR segmentation (SOARS) system using deep learning to precisely delineate a comprehensive set of 42 H&N OARs. SOARS stratifies 42 OARs into anchor, mid-level, and small & hard subcategories, with specifically derived neural network architectures for each category by neural architecture search (NAS) principles. We built SOARS models using 176 training patients in an internal institution and independently evaluated on 1327 external patients across six different institutions. It consistently outperformed other state-of-the-art methods by at least 3-5% in Dice score for each institutional evaluation (up to 36% relative error reduction in other metrics). More importantly, extensive multi-user studies evidently demonstrated that 98% of the SOARS predictions need only very minor or no revisions for direct clinical acceptance (saving 90% radiation oncologists workload), and their segmentation and dosimetric accuracy are within or smaller than the inter-user variation. These findings confirmed the strong clinical applicability of SOARS for the OAR delineation process in H&N cancer radiotherapy workflows, with improved efficiency, comprehensiveness, and quality.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
Accurate and Generalizable Quantitative Scoring of Liver Steatosis from Ultrasound Images via Scalable Deep Learning
Authors:
Bowen Li,
Dar-In Tai,
Ke Yan,
Yi-Cheng Chen,
Shiu-Feng Huang,
Tse-Hwa Hsu,
Wan-Ting Yu,
**g Xiao,
Le Lu,
Adam P. Harrison
Abstract:
Background & Aims: Hepatic steatosis is a major cause of chronic liver disease. 2D ultrasound is the most widely used non-invasive tool for screening and monitoring, but associated diagnoses are highly subjective. We developed a scalable deep learning (DL) algorithm for quantitative scoring of liver steatosis from 2D ultrasound images.
Approach & Results: Using retrospectively collected multi-vi…
▽ More
Background & Aims: Hepatic steatosis is a major cause of chronic liver disease. 2D ultrasound is the most widely used non-invasive tool for screening and monitoring, but associated diagnoses are highly subjective. We developed a scalable deep learning (DL) algorithm for quantitative scoring of liver steatosis from 2D ultrasound images.
Approach & Results: Using retrospectively collected multi-view ultrasound data from 3,310 patients, 19,513 studies, and 228,075 images, we trained a DL algorithm to diagnose steatosis stages (healthy, mild, moderate, or severe) from ultrasound diagnoses. Performance was validated on two multi-scanner unblinded and blinded (initially to DL developer) histology-proven cohorts (147 and 112 patients) with histopathology fatty cell percentage diagnoses, and a subset with FibroScan diagnoses. We also quantified reliability across scanners and viewpoints. Results were evaluated using Bland-Altman and receiver operating characteristic (ROC) analysis. The DL algorithm demonstrates repeatable measurements with a moderate number of images (3 for each viewpoint) and high agreement across 3 premium ultrasound scanners. High diagnostic performance was observed across all viewpoints: area under the curves of the ROC to classify >=mild, >=moderate, =severe steatosis grades were 0.85, 0.90, and 0.93, respectively. The DL algorithm outperformed or performed at least comparably to FibroScan with statistically significant improvements for all levels on the unblinded histology-proven cohort, and for =severe steatosis on the blinded histology-proven cohort.
Conclusions: The DL algorithm provides a reliable quantitative steatosis assessment across view and scanners on two multi-scanner cohorts. Diagnostic performance was high with comparable or better performance than FibroScan.
△ Less
Submitted 11 October, 2021;
originally announced October 2021.
-
Multipoint interplanetary coronal mass ejections observed with Solar Orbiter, BepiColombo, Parker Solar Probe, Wind and STEREO-A
Authors:
C. Möstl,
A. J. Weiss,
M. A. Reiss,
T. Amerstorfer,
R. L. Bailey,
J. Hinterreiter,
M. Bauer,
D. Barnes,
J. A. Davies,
R. A. Harrison,
J. L. Freiherr von Forstner,
E. E. Davies,
D. Heyner,
T. Horbury,
S. D. Bale
Abstract:
We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP),…
▽ More
We report the result of the first search for multipoint in situ and imaging observations of interplanetary coronal mass ejections (ICMEs) starting with the first Solar Orbiter (SolO) data in 2020 April - 2021 April. A data exploration analysis is performed including visualizations of the magnetic field and plasma observations made by the five spacecraft SolO, BepiColombo, Parker Solar Probe (PSP), Wind and STEREO-A, in connection with coronagraph and heliospheric imaging observations from STEREO-A/SECCHI and SOHO/LASCO. We identify ICME events that could be unambiguously followed with the STEREO-A heliospheric imagers during their interplanetary propagation to their impact at the aforementioned spacecraft, and look for events where the same ICME is seen in situ by widely separated spacecraft. We highlight two events: (1) a small streamer blowout CME on 2020 June 23 observed with a triple lineup by PSP, BepiColombo and Wind, guided by imaging with STEREO-A, and (2) the first fast CME of solar cycle 25 ($ \approx 1600$ km s$^{-1}$) on 2020 November 29 observed in situ by PSP and STEREO-A. These results are useful for modeling the magnetic structure of ICMEs and the interplanetary evolution and global shape of their flux ropes and shocks, and for studying the propagation of solar energetic particles. The combined data from these missions are already turning out to be a treasure trove for space weather research and are expected to become even more valuable with an increasing number of ICME events expected during the rise and maximum of solar cycle 25.
△ Less
Submitted 4 January, 2022; v1 submitted 15 September, 2021;
originally announced September 2021.
-
Predicting CMEs using ELEvoHI with STEREO-HI beacon data
Authors:
Maike Bauer,
Tanja Amerstorfer,
Jürgen Hinterreiter,
Andreas J. Weiss,
Jackie A. Davies,
Christian Möstl,
Ute V. Amerstorfer,
Martin A. Reiss,
Richard A. Harrison
Abstract:
Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we in…
▽ More
Being able to accurately predict the arrival of coronal mass ejections (CMEs) at Earth has been a long-standing problem in space weather research and operations. In this study, we use the ELlipse Evolution model based on Heliospheric Images (ELEvoHI) to predict the arrival time and speed of 10 CME events that were observed by HI on the STEREO-A spacecraft between 2010 and 2020. Additionally, we introduce a Python tool for downloading and preparing STEREO-HI data, as well as tracking CMEs. In contrast to most previous studies, we use not only science data, which has a relatively high spatial and temporal resolution, but also low-quality beacon data, which is - in contrast to science data - provided in real-time by the STEREO-A spacecraft. We do not use data from the STEREO-B spacecraft. We get a mean absolute error of 8.81 $\pm$ 3.18 h / 59 $\pm$ 31 kms$^{-1}$ for arrival time/speed predictions using science data and 11.36 $\pm$ 8.69 h / 106 $\pm$ 61 kms$^{-1}$ for beacon data. We find that using science data generally leads to more accurate predictions, but using beacon data with the ELEvoHI model is certainly a viable choice in the absence of higher resolution real-time data. We propose that these differences could be minimized if not eliminated altogether if higher quality real-time data was available, either by enhancing the quality of the already available data or coming from a new mission carrying a HI instrument on-board.
△ Less
Submitted 7 December, 2021; v1 submitted 18 August, 2021;
originally announced August 2021.
-
In situ multi-spacecraft and remote imaging observations of the first CME detected by Solar Orbiter and BepiColombo
Authors:
E. E. Davies,
C. Möstl,
M. J. Owens,
A. J. Weiss,
T. Amerstorfer,
J. Hinterreiter,
M. Bauer,
R. L. Bailey,
M. A. Reiss,
R. J. Forsyth,
T. S. Horbury,
H. O'Brien,
V. Evans,
V. Angelini,
D. Heyner,
I. Richter,
H-U. Auster,
W. Magnes,
W. Baumjohann,
D. Fischer,
D. Barnes,
J. A. Davies,
R. A. Harrison
Abstract:
On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ i…
▽ More
On 2020 April 19 a coronal mass ejection (CME) was detected in situ by Solar Orbiter at a heliocentric distance of about 0.8 AU. The CME was later observed in situ on April 20th by the Wind and BepiColombo spacecraft whilst BepiColombo was located very close to Earth. This CME presents a good opportunity for a triple radial alignment study, as the spacecraft were separated by less than 5$^\circ$ in longitude. The source of the CME, which was launched on April 15th, was an almost entirely isolated streamer blowout. STEREO-A observed the event remotely from -75.1$^\circ$ longitude, which is an exceptionally well suited viewpoint for heliospheric imaging of an Earth directed CME. The configuration of the four spacecraft has provided an exceptionally clean link between remote imaging and in situ observations of the CME. We have used the in situ observations of the CME at Solar Orbiter, Wind, and BepiColombo, and the remote observations of the CME at STEREO-A in combination with flux rope models to determine the global shape of the CME and its evolution as it propagated through the inner heliosphere. A clear flattening of the CME cross-section has been observed by STEREO-A, and further confirmed by comparing profiles of the flux rope models to the in situ data, where the distorted flux rope cross-section qualitatively agrees most with in situ observations of the magnetic field at Solar Orbiter. Comparing in situ observations of the magnetic field between spacecraft, we find that the dependence of the maximum (mean) magnetic field strength decreases with heliocentric distance as $r^{-1.24 \pm 0.50}$ ($r^{-1.12 \pm 0.14}$), in disagreement with previous studies. Further assessment of the axial and poloidal magnetic field strength dependencies suggests that the expansion of the CME is likely neither self-similar nor cylindrically symmetric.
△ Less
Submitted 23 February, 2021; v1 submitted 14 December, 2020;
originally announced December 2020.
-
The high helium abundance and charge states of the interplanetary CME and its material source on the Sun
Authors:
Hui Fu,
R. A. Harrison,
J. A. Davies,
LiDong Xia,
XiaoShuai Zhu,
Bo Li,
ZhengHua Huang,
D. Barnes
Abstract:
Identifying the source of the material within coronal mass ejections (CMEs) and understanding CME onset mechanisms are fundamental issues in solar and space physics. Parameters relating to plasma composition, such as charge states and He abundance (\ahe), may be different for plasmas originating from differing processes or regions on the Sun. Thus, it is crucial to examine the relationship between…
▽ More
Identifying the source of the material within coronal mass ejections (CMEs) and understanding CME onset mechanisms are fundamental issues in solar and space physics. Parameters relating to plasma composition, such as charge states and He abundance (\ahe), may be different for plasmas originating from differing processes or regions on the Sun. Thus, it is crucial to examine the relationship between in-situ measurements of CME composition and activity on the Sun. We study the CME that erupted on 2014 September 10, in association with an X1.6 flare, by analyzing AIA imaging and IRIS spectroscopic observations and its in-situ signatures detected by Wind and ACE. We find that during the slow expansion and intensity increase of the sigmoid, plasma temperatures of 9 MK, and higher, first appear at the footpoints of the sigmoid, associated with chromospheric brightening. Then the high-temperature region extends along the sigmoid. IRIS observations confirm that this extension is caused by transportation of hot plasma upflow. Our results show that chromospheric material can be heated to 9 MK, and above, by chromospheric evaporation at the sigmoid footpoints before flare onset. The heated chromospheric material can transport into the sigmoidal structure and supply mass to the CME. The aforementioned CME mass supply scenario provides a reasonable explanation for the detection of high charge states and elevated \ahe\ in the associated ICME. The observations also demonstrate that the quasi-steady evolution in the precursor phase is dominated by magnetic reconnection between the rising flux rope and the overlying magnetic field structure.
△ Less
Submitted 20 August, 2020;
originally announced August 2020.
-
Evaluation of CME Arrival Prediction Using Ensemble Modeling Based on Heliospheric Imaging Observations
Authors:
Tanja Amerstorfer,
Jürgen Hinterreiter,
Martin A. Reiss,
Christian Möstl,
Jackie A. Davies,
Rachel L. Bailey,
Andreas J. Weiss,
Mateja Dumbović,
Maike Bauer,
Ute V. Amerstorfer,
Richard A. Harrison
Abstract:
In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coro…
▽ More
In this study, we evaluate a coronal mass ejection (CME) arrival prediction tool that utilizes the wide-angle observations made by STEREO's heliospheric imagers (HI). The unsurpassable advantage of these imagers is the possibility to observe the evolution and propagation of a CME from close to the Sun out to 1 AU and beyond. We believe that by exploiting this capability, instead of relying on coronagraph observations only, it is possible to improve today's CME arrival time predictions. The ELlipse Evolution model based on HI observations (ELEvoHI) assumes that the CME frontal shape within the ecliptic plane is an ellipse, and allows the CME to adjust to the ambient solar wind speed, i.e. it is drag-based. ELEvoHI is used to perform ensemble simulations by varying the CME frontal shape within given boundary conditions that are consistent with the observations made by HI. In this work, we evaluate different set-ups of the model by performing hindcasts for 15 well-defined isolated CMEs that occurred when STEREO was near L4/5, between the end of 2008 and the beginning of 2011. In this way, we find a mean absolute error of between $6.2\pm7.9$ h and $9.9\pm13$ h depending on the model set-up used. ELEvoHI is specified for using data from future space weather missions carrying HIs located at L5 or L1. It can also be used with near real-time STEREO-A HI beacon data to provide CME arrival predictions during the next $\sim7$ years when STEREO-A is observing the Sun-Earth space.
△ Less
Submitted 16 February, 2021; v1 submitted 6 August, 2020;
originally announced August 2020.
-
CMEs in the Heliosphere: III. A Statistical Analysis of the Kinematic Properties Derived from Stereoscopic Geometrical Modelling Techniques Applied to CMEs Detected in the Heliosphere from 2008 to 2014 by STEREO/HI-1
Authors:
D. Barnes,
J. A. Davies,
R. A. Harrison,
J. P. Byrne,
C. H. Perry,
V. Bothmer,
J. P. Eastwood,
P. T. Gallagher,
E. K. J. Kilpua,
C. Möstl,
L. Rodriguez,
A. P. Rouillard,
D. Odstrcil
Abstract:
We present an analysis of coronal mass ejections (CMEs) observed by the Heliospheric Imagers (HIs) on board NASA's Solar Terrestrial Relations Observatory (STEREO) spacecraft. Between August 2008 and April 2014 we identify 273 CMEs that are observed simultaneously, by the HIs on both spacecraft. For each CME, we track the observed leading edge, as a function of time, from both vantage points, and…
▽ More
We present an analysis of coronal mass ejections (CMEs) observed by the Heliospheric Imagers (HIs) on board NASA's Solar Terrestrial Relations Observatory (STEREO) spacecraft. Between August 2008 and April 2014 we identify 273 CMEs that are observed simultaneously, by the HIs on both spacecraft. For each CME, we track the observed leading edge, as a function of time, from both vantage points, and apply the Stereoscopic Self-Similar Expansion (SSSE) technique to infer their propagation throughout the inner heliosphere. The technique is unable to accurately locate CMEs when their observed leading edge passes between the spacecraft, however, we are able to successfully apply the technique to 151, most of which occur once the spacecraft separation angle exceeds 180 degrees, during solar maximum. We find that using a small half-width to fit the CME can result in observed acceleration to unphysically high velocities and that using a larger half-width can fail to accurately locate the CMEs close to the Sun because the method does not account for CME over-expansion in this region. Observed velocities from SSSE are found to agree well with single-spacecraft (SSEF) analysis techniques applied to the same events. CME propagation directions derived from SSSE and SSEF analysis agree poorly because of known limitations present in the latter. This work was carried out as part of the EU FP7 HELCATS (Heliospheric Cataloguing, Analysis and Techniques Service) project (http://www.helcats-fp7.eu/).
△ Less
Submitted 26 June, 2020;
originally announced June 2020.
-
The LUX-ZEPLIN (LZ) radioactivity and cleanliness control programs
Authors:
D. S. Akerib,
C. W. Akerlof,
D. Yu. Akimov,
A. Alquahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
A. Arbuckle,
J. E. Armstrong,
M. Arthurs,
H. Auyeung,
S. Aviles,
X. Bai,
A. J. Bailey,
J. Balajthy,
S. Balashov,
J. Bang,
M. J. Barry,
D. Bauer,
P. Bauer,
A. Baxter,
J. Belle,
P. Beltrame,
J. Bensinger
, et al. (365 additional authors not shown)
Abstract:
LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherent…
▽ More
LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherently low radioactivity content. The LZ collaboration performed an extensive radioassay campaign over a period of six years to inform material selection for construction and provide an input to the experimental background model against which any possible signal excess may be evaluated. The campaign and its results are described in this paper. We present assays of dust and radon daughters depositing on the surface of components as well as cleanliness controls necessary to maintain background expectations through detector construction and assembly. Finally, examples from the campaign to highlight fixed contaminant radioassays for the LZ photomultiplier tubes, quality control and quality assurance procedures through fabrication, radon emanation measurements of major sub-systems, and bespoke detector systems to assay scintillator are presented.
△ Less
Submitted 28 February, 2022; v1 submitted 3 June, 2020;
originally announced June 2020.
-
Simulations of Events for the LUX-ZEPLIN (LZ) Dark Matter Experiment
Authors:
The LUX-ZEPLIN Collaboration,
:,
D. S. Akerib,
C. W. Akerlof,
A. Alqahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
J. E. Armstrong,
M. Arthurs,
X. Bai,
J. Balajthy,
S. Balashov,
J. Bang,
D. Bauer,
A. Baxter,
J. Bensinger,
E. P. Bernard,
A. Bernstein,
A. Bhatti,
A. Biekert,
T. P. Biesiadzinski,
H. J. Birch,
K. E. Boast
, et al. (173 additional authors not shown)
Abstract:
The LUX-ZEPLIN dark matter search aims to achieve a sensitivity to the WIMP-nucleon spin-independent cross-section down to (1--2)$\times10^{-12}$\,pb at a WIMP mass of 40 GeV/$c^2$. This paper describes the simulations framework that, along with radioactivity measurements, was used to support this projection, and also to provide mock data for validating reconstruction and analysis software. Of par…
▽ More
The LUX-ZEPLIN dark matter search aims to achieve a sensitivity to the WIMP-nucleon spin-independent cross-section down to (1--2)$\times10^{-12}$\,pb at a WIMP mass of 40 GeV/$c^2$. This paper describes the simulations framework that, along with radioactivity measurements, was used to support this projection, and also to provide mock data for validating reconstruction and analysis software. Of particular note are the event generators, which allow us to model the background radiation, and the detector response physics used in the production of raw signals, which can be converted into digitized waveforms similar to data from the operational detector. Inclusion of the detector response allows us to process simulated data using the same analysis routines as developed to process the experimental data.
△ Less
Submitted 23 June, 2020; v1 submitted 25 January, 2020;
originally announced January 2020.
-
Evolution of the accretion disk-corona during bright hard-to-soft state transition: A reflection spectroscopic study with GX 339-4
Authors:
Navin Sridhar,
Javier A. García,
James F. Steiner,
Riley M. T. Connors,
Victoria Grinberg,
Fiona A. Harrison
Abstract:
We present the analysis of several observations of the black hole binary GX 339--4 during its bright intermediate states from two different outbursts (2002 and 2004), as observed by RXTE/PCA. We perform a consistent study of its reflection spectrum by employing the relxill family of relativistic reflection models to probe the evolutionary properties of the accretion disk including the inner disk r…
▽ More
We present the analysis of several observations of the black hole binary GX 339--4 during its bright intermediate states from two different outbursts (2002 and 2004), as observed by RXTE/PCA. We perform a consistent study of its reflection spectrum by employing the relxill family of relativistic reflection models to probe the evolutionary properties of the accretion disk including the inner disk radius ($R_{\rm in}$), ionization parameter ($ξ$), temperatures of the inner disk ($T_{\rm in}$), corona ($kT_{\rm e}$), and its optical depth ($τ$). Our analysis indicates that the disk inner edge approaches the inner-most stable circular orbit (ISCO) during the early onset of bright hard state, and that the truncation radius of the disk remains low ($\lesssim 14 R_{\rm g}$) throughout the transition from hard to soft state. This suggests that the changes observed in the accretion disk properties during the state transition are driven by variation in accretion rate, and not necessarily due to changes in the inner disk's radius. We compare the aforementioned disk properties in two different outbursts, with state transitions occurring at dissimilar luminosities, and find identical evolutionary trends in the disk properties, with differences only seen in corona's $kT_{\rm e}$ and $τ$. We also perform an analysis by employing a self-consistent Comptonized accretion disk model accounting for the scatter of disk photons by the corona, and measure low inner disk truncation radius across the bright intermediate states, using the temperature dependent values of spectral hardening factor, thereby independently confirming our results from the reflection spectrum analysis.
△ Less
Submitted 8 December, 2020; v1 submitted 24 December, 2019;
originally announced December 2019.
-
The LUX-ZEPLIN (LZ) Experiment
Authors:
The LZ Collaboration,
D. S. Akerib,
C. W. Akerlof,
D. Yu. Akimov,
A. Alquahtani,
S. K. Alsum,
T. J. Anderson,
N. Angelides,
H. M. Araújo,
A. Arbuckle,
J. E. Armstrong,
M. Arthurs,
H. Auyeung,
X. Bai,
A. J. Bailey,
J. Balajthy,
S. Balashov,
J. Bang,
M. J. Barry,
J. Barthel,
D. Bauer,
P. Bauer,
A. Baxter,
J. Belle,
P. Beltrame
, et al. (357 additional authors not shown)
Abstract:
We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient n…
▽ More
We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient neutron capture and tagging. LZ is located in the Davis Cavern at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. We describe the major subsystems of the experiment and its key design features and requirements.
△ Less
Submitted 3 November, 2019; v1 submitted 20 October, 2019;
originally announced October 2019.
-
First NuSTAR Limits on Quiet Sun Hard X-Ray Transient Events
Authors:
Andrew J. Marsh,
David M. Smith,
Lindsay Glesener,
Iain G. Hannah,
Brian W. Grefenstette,
Amir Caspi,
Säm Krucker,
Hugh S. Hudson,
Kristin K. Madsen,
Stephen M. White,
Matej Kuhar,
Paul J. Wright,
Steven E. Boggs,
Finn E. Christensen,
William W. Craig,
Charles J. Hailey,
Fiona A. Harrison,
Daniel Stern,
William W. Zhang
Abstract:
We present the first results of a search for transient hard X-ray (HXR) emission in the quiet solar corona with the \textit{Nuclear Spectroscopic Telescope Array} (\textit{NuSTAR}) satellite. While \textit{NuSTAR} was designed as an astrophysics mission, it can observe the Sun above 2~keV with unprecedented sensitivity due to its pioneering use of focusing optics. \textit{NuSTAR} first observed qu…
▽ More
We present the first results of a search for transient hard X-ray (HXR) emission in the quiet solar corona with the \textit{Nuclear Spectroscopic Telescope Array} (\textit{NuSTAR}) satellite. While \textit{NuSTAR} was designed as an astrophysics mission, it can observe the Sun above 2~keV with unprecedented sensitivity due to its pioneering use of focusing optics. \textit{NuSTAR} first observed quiet Sun regions on 2014 November 1, although out-of-view active regions contributed a notable amount of background in the form of single-bounce (unfocused) X-rays. We conducted a search for quiet Sun transient brightenings on time scales of 100 s and set upper limits on emission in two energy bands. We set 2.5--4~keV limits on brightenings with time scales of 100 s, expressed as the temperature T and emission measure EM of a thermal plasma. We also set 10--20~keV limits on brightenings with time scales of 30, 60, and 100 s, expressed as model-independent photon fluxes. The limits in both bands are well below previous HXR microflare detections, though not low enough to detect events of equivalent T and EM as quiet Sun brightenings seen in soft X-ray observations. We expect future observations during solar minimum to increase the \textit{NuSTAR} sensitivity by over two orders of magnitude due to higher instrument livetime and reduced solar background.
△ Less
Submitted 14 November, 2017;
originally announced November 2017.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Modeling observations of solar coronal mass ejections with heliospheric imagers verified with the Heliophysics System Observatory
Authors:
C. Möstl,
A. Isavnin,
P. D. Boakes,
E. K. J. Kilpua,
J. A. Davies,
R. A. Harrison,
D. Barnes,
V. Krupar,
J. P. Eastwood,
S. W. Good,
R. J. Forsyth,
V. Bothmer,
M. A. Reiss,
T. Amerstorfer,
R. M. Winslow,
B. J. Anderson,
L. C. Philpott,
L. Rodriguez,
A. P. Rouillard,
P. T. Gallagher,
T. L. Zhang
Abstract:
We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observato…
▽ More
We present an advance towards accurately predicting the arrivals of coronal mass ejections (CMEs) at the terrestrial planets, including Earth. For the first time, we are able to assess a CME prediction model using data over 2/3 of a solar cycle of observations with the Heliophysics System Observatory. We validate modeling results of 1337 CMEs observed with the Solar Terrestrial Relations Observatory (STEREO) heliospheric imagers (HI) (science data) from 8 years of observations by 5 in situ observing spacecraft. We use the self-similar expansion model for CME fronts assuming 60 degree longitudinal width, constant speed and constant propagation direction. With these assumptions we find that 23%-35% of all CMEs that were predicted to hit a certain spacecraft lead to clear in situ signatures, so that for 1 correct prediction, 2 to 3 false alarms would have been issued. In addition, we find that the prediction accuracy does not degrade with the HI longitudinal separation from Earth. Predicted arrival times are on average within 2.6 +/- 16.6 hours difference of the in situ arrival time, similar to analytical and numerical modeling, and a true skill statistic of 0.21. We also discuss various factors that may improve the accuracy of space weather forecasting using wide-angle heliospheric imager observations. These results form a first order approximated baseline of the prediction accuracy that is possible with HI and other methods used for data by an operational space weather mission at the Sun-Earth L5 point.
△ Less
Submitted 7 July, 2017; v1 submitted 2 March, 2017;
originally announced March 2017.
-
Prototype muon detectors for the AMIGA component of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin
, et al. (429 additional authors not shown)
Abstract:
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary…
▽ More
Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory to extend its range of detection and to directly measure the muon content of the particle showers. It consists of an infill of surface water-Cherenkov detectors accompanied by buried scintillator detectors used for muon counting. The main objectives of the AMIGA engineering array, referred to as the Unitary Cell, are to identify and resolve all engineering issues as well as to understand the muon-number counting uncertainties related to the design of the detector. The mechanical design, fabrication and deployment processes of the muon counters of the Unitary Cell are described in this document. These muon counters modules comprise sealed PVC casings containing plastic scintillation bars, wavelength-shifter optical fibers, 64 pixel photomultiplier tubes, and acquisition electronics. The modules are buried approximately 2.25 m below ground level in order to minimize contamination from electromagnetic shower particles. The mechanical setup, which allows access to the electronics for maintenance, is also described in addition to tests of the modules' response and integrity. The completed Unitary Cell has measured a number of air showers of which a first analysis of a sample event is included here.
△ Less
Submitted 12 May, 2016; v1 submitted 5 May, 2016;
originally announced May 2016.
-
Nanosecond-level time synchronization of autonomous radio detector stations for extensive air showers
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
R. Alves Batista,
M. Ambrosio,
A. Aminaei,
G. A. Anastasi,
L. Anchordoqui,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila
, et al. (426 additional authors not shown)
Abstract:
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected…
▽ More
To exploit the full potential of radio measurements of cosmic-ray air showers at MHz frequencies, a detector timing synchronization within 1 ns is needed. Large distributed radio detector arrays such as the Auger Engineering Radio Array (AERA) rely on timing via the Global Positioning System (GPS) for the synchronization of individual detector station clocks. Unfortunately, GPS timing is expected to have an accuracy no better than about 5 ns. In practice, in particular in AERA, the GPS clocks exhibit drifts on the order of tens of ns. We developed a technique to correct for the GPS drifts, and an independent method is used for cross-checks that indeed we reach nanosecond-scale timing accuracy by this correction. First, we operate a "beacon transmitter" which emits defined sine waves detected by AERA antennas recorded within the physics data. The relative phasing of these sine waves can be used to correct for GPS clock drifts. In addition to this, we observe radio pulses emitted by commercial airplanes, the position of which we determine in real time from Automatic Dependent Surveillance Broadcasts intercepted with a software-defined radio. From the known source location and the measured arrival times of the pulses we determine relative timing offsets between radio detector stations. We demonstrate with a combined analysis that the two methods give a consistent timing calibration with an accuracy of 2 ns or better. Consequently, the beacon method alone can be used in the future to continuously determine and correct for GPS clock drifts in each individual event measured by AERA.
△ Less
Submitted 15 February, 2016; v1 submitted 7 December, 2015;
originally announced December 2015.
-
Using Coordinated Observations in Polarised White Light and Faraday Rotation to Probe the Spatial Position and Magnetic Field of an Interplanetary Sheath
Authors:
Ming Xiong,
Jackie A. Davies,
Xueshang Feng,
Mathew J. Owens,
Richard A. Harrison,
Chris J. Davis,
Ying D. Liu
Abstract:
Coronal mass ejections (CMEs) can be continuously tracked through a large portion of the inner heliosphere by direct imaging in visible and radio wavebands. White-light (WL) signatures of solar wind transients, such as CMEs, result from Thomson scattering of sunlight by free electrons, and therefore depend on both the viewing geometry and the electron density. The Faraday rotation (FR) of radio wa…
▽ More
Coronal mass ejections (CMEs) can be continuously tracked through a large portion of the inner heliosphere by direct imaging in visible and radio wavebands. White-light (WL) signatures of solar wind transients, such as CMEs, result from Thomson scattering of sunlight by free electrons, and therefore depend on both the viewing geometry and the electron density. The Faraday rotation (FR) of radio waves from extragalactic pulsars and quasars, which arises due to the presence of such solar wind features, depends on the line-of-sight magnetic field component $B_\parallel$, and the electron density. To understand coordinated WL and FR observations of CMEs, we perform forward magnetohydrodynamic modelling of an Earth-directed shock and synthesise the signatures that would be remotely sensed at a number of widely distributed vantage points in the inner heliosphere. Removal of the background solar wind contribution reveals the shock-associated enhancements in WL and FR. While the efficiency of Thomson scattering depends on scattering angle, WL radiance $I$ decreases with heliocentric distance $r$ roughly according to the expression $I \propto r^{-3}$. The sheath region downstream of the Earth-directed shock is well viewed from the L4 and L5 Lagrangian points, demonstrating the benefits of these points in terms of space weather forecasting. The spatial position of the main scattering site $\mathbf{r}_{\rm sheath}$ and the mass of plasma at that position $M_{\rm sheath}$ can be inferred from the polarisation of the shock-associated enhancement in WL radiance. From the FR measurements, the local $B_{\parallel {\rm sheath}}$ at $\mathbf{r}_{\rm sheath}$ can then be estimated. Simultaneous observations in polarised WL and FR can not only be used to detect CMEs, but also to diagnose their plasma and magnetic field properties.
△ Less
Submitted 15 August, 2013;
originally announced August 2013.
-
Effects of Bulk and Surface Conductivity on the Performance of CdZnTe Pixel Detectors
Authors:
Aleksey E. Bolotnikov,
C. M. Hubert Chen,
Walter R. Cook,
Fiona A. Harrison,
Irfan Kuvvetli,
Stephen M. Schindler
Abstract:
We studied the effects of bulk and surface conductivity on the performance of high-resistivity CdZnTe (CZT) pixel detectors with Pt contacts. We emphasize the difference in mechanisms of the bulk and surface conductivity as indicated by their different temperature behaviors. In addition, the existence of a thin (10-100 A) oxide layer on the surface of CZT, formed during the fabrication process,…
▽ More
We studied the effects of bulk and surface conductivity on the performance of high-resistivity CdZnTe (CZT) pixel detectors with Pt contacts. We emphasize the difference in mechanisms of the bulk and surface conductivity as indicated by their different temperature behaviors. In addition, the existence of a thin (10-100 A) oxide layer on the surface of CZT, formed during the fabrication process, affects both bulk and surface leakage currents. We demonstrate that the measured I-V dependencies of bulk current can be explained by considering the CZT detector as a metal-semiconductor-metal system with two back-to-back Schottky-barrier contacts. The high surface leakage current is apparently due to the presence of a low-resistivity surface layer that has characteristics which differ considerably from those of the bulk material. This surface layer has a profound effect on the charge collection efficiency in detectors with multi-contact geometry; some fraction of the electric field lines originated on the cathode intersects the surface areas between the pixel contacts where the charge produced by an ionizing particle gets trapped. To overcome this effect we place a grid of thin electrodes between the pixel contacts; when the grid is negatively biased, the strong electric field in the gaps between the pixels forces the electrons landing on the surface to move toward the contacts, preventing the charge loss. We have investigated these effects by using CZT pixel detectors indium bump bonded to a custom-built VLSI readout chip.
△ Less
Submitted 30 November, 2001;
originally announced December 2001.
-
Properties of Pt Schottky Type Contacts On High-Resistivity CdZnTe Detectors
Authors:
Aleksey E. Bolotnikov,
Steven E. Boggs,
C. M. Hubert Chen,
Walter R. Cook,
Fiona A. Harrison,
Stephen M. Schindler
Abstract:
In this paper we present studies of the I-V characteristics of CdZnTe detectors with Pt contacts fabricated from high-resistivity single crystals grown by the high-pressure Brigman process. We have analyzed the experimental I-V curves using a model that approximates the CZT detector as a system consisting of a reversed Schottky contact in series with the bulk resistance. Least square fits to the…
▽ More
In this paper we present studies of the I-V characteristics of CdZnTe detectors with Pt contacts fabricated from high-resistivity single crystals grown by the high-pressure Brigman process. We have analyzed the experimental I-V curves using a model that approximates the CZT detector as a system consisting of a reversed Schottky contact in series with the bulk resistance. Least square fits to the experimental data yield 0.78-0.79 eV for the Pt-CZT Schottky barrier height, and <20 V for the voltage required to deplete a 2 mm thick CZT detector. We demonstrate that at high bias the thermionic current over the Schottky barrier, the height of which is reduced due to an interfacial layer between the contact and CZT material, controls the leakage current of the detectors. In many cases the dark current is not determined by the resistivity of the bulk material, but rather the properties of the contacts; namely by the interfacial layer between the contact and CZT material.
△ Less
Submitted 1 March, 2001;
originally announced March 2001.