Showing 1–12 of 12 results for author: Harper, J M

Chemical strategies to mitigate electrostatic charging during coffee grinding

Authors: Joshua Méndez Harper, Christopher H. Hendon

Abstract: The process of grinding coffee generates particles with high levels of electrostatic charge, causing a number of detrimental effects including clum**, particle dispersal, and spark discharge. At the brewing level, electrostatic aggregation between particles affects liquid-solid accessibility, leading to variable extraction quality. In this study, we quantify the effectiveness of four charge miti… ▽ More The process of grinding coffee generates particles with high levels of electrostatic charge, causing a number of detrimental effects including clum**, particle dispersal, and spark discharge. At the brewing level, electrostatic aggregation between particles affects liquid-solid accessibility, leading to variable extraction quality. In this study, we quantify the effectiveness of four charge mitigation strategies. Our data suggests that adding small amounts of water to whole beans pre-grinding, or bombarding the grounds with ions produced from a high-voltage ionizer, are capable of de-electrifying the granular flows. While these techniques helped reduce visible mess, only the static reduction through water inclusion was found to impact the brewing parameters in espresso format coffee. There, wetting coffee with less than 0.05 mL / g resulted in a marked shift in particle size distribution, in part due to preventing clump formation and also liberating fine particles from sticking to the grinder. With all other variables kept constant, this shift resulted in at least 15% higher coffee concentration for espresso extracts prepared from darker roasts. These findings pose financial and sustainability implications, and encourage the widespread implementation of water use to de-electrify coffee during grinding. △ Less

Submitted 19 December, 2023; v1 submitted 5 December, 2023; originally announced December 2023.

Comments: 13 pages, 5 figures

Electrified fallout from a wildfire plume

Authors: Joshua Méndez Harper, Josef Dufek, Larry Hartman

Abstract: Large wildfires are becoming more frequent at temperate latitudes. Often, fires generate massive convective columns that can carry solid particles (ash) into the stratosphere. Like their meteorological counterparts, pyrocumulonimbus (pyroCb) clouds can generate intense lightning storms. Recently, pyrogenic lightning has garnered renewed interest for its capacity to ignite new fires at large distan… ▽ More Large wildfires are becoming more frequent at temperate latitudes. Often, fires generate massive convective columns that can carry solid particles (ash) into the stratosphere. Like their meteorological counterparts, pyrocumulonimbus (pyroCb) clouds can generate intense lightning storms. Recently, pyrogenic lightning has garnered renewed interest for its capacity to ignite new fires at large distances from the initial fire (in addition to representing a hazard in and of itself). Furthermore, and in analogy with volcanogenic lightning, pyrogenic lightning may offer novel opportunities to monitor and infer the internal dynamics of wildfires remotely. However, the electrification mechanisms underlying wildfire lightning require further clarification. Here, we report on charge measurements conducted during the 2022 Cedar Creek ``megafire.'' We find that a wildfire plume associated with various pyCb events remains mildly electrified at $\sim$80 km from the fire. Our measurements suggest that individual ash particles carry charge densities on the order of 10\textsuperscript{-8} - 10\textsuperscript{-7} C m\textsuperscript{-2}. Owing to this low level of charging, additional electrification mechanisms (perhaps, those associated with the nucleation of ice) appear to be necessary to produce pyrogenic lightning at large distances from the source. △ Less

Submitted 10 October, 2023; originally announced October 2023.

A generalized Townsend's theory for Paschen curves in planar, cylindrical, and spherical geometries

Authors: Jeremy A. Riousset, Joshua Méndez Harper, Josef Dufek, Jacob A. Engle, Jared P. Nelson, Annelisa B. Esparza

Abstract: In this work, we focus on plasma discharges produced between two electrodes with a high potential difference, resulting in the ionization of the neutral particles supporting a current in the gaseous medium. At low currents and low temperatures, this process can create luminescent emissions: the so-called glow and corona discharges. The parallel plate geometry used in Townsend's (1900) theory lets… ▽ More In this work, we focus on plasma discharges produced between two electrodes with a high potential difference, resulting in the ionization of the neutral particles supporting a current in the gaseous medium. At low currents and low temperatures, this process can create luminescent emissions: the so-called glow and corona discharges. The parallel plate geometry used in Townsend's (1900) theory lets us develop a theoretical formalism, with explicit solutions for the critical voltage effectively reproducing experimental Paschen curves. However, most discharge processes occur in non-parallel plate geometries, such as discharges between grains or ice particles in multiphase flows. Here, we propose a generalization of the classic parallel plate configurations to concentric spherical and coaxial cylindrical geometries in Earth, Mars, Titan, and Venus atmospheres. In a spherical case, a small radius effectively represents a sharp tip rod, while larger, centimeter-scale radii represents rounded or blunted tips. Similarly, in a cylindrical case, a small radius would correspond to a thin wire. We solve continuity equations in the gap and estimate a critical radius and minimum breakdown voltage that allows ionization of neutral gas and formation of a glow discharge. We show that glow coronae form more easily in Mars's low-pressure, $CO_2$-rich atmosphere than in Earth's high-pressure atmosphere. Additionally, we present breakdown criteria for Titan and Venus. We further demonstrate that critical voltage minima occur at 0.5 cm$\cdot$Torr for all three investigated geometries, suggesting easier initiation around millimeter-size particles in dust and water clouds and could be readily extended to examine other multiphase flows with inertial particles. △ Less

Submitted 9 December, 2022; originally announced December 2022.

The lifetime of charged dust in the atmosphere

Authors: Josh Méndez Harper, Dana Harvey, Tianshu Huang, Jack McGrath III, David Meer, Justin C. Burton

Abstract: Windblown dust plays critical roles in numerous geophysical and biological systems, yet current models fail to explain the transport of coarse-mode particles (>5 $μ$m) to great distances from their sources. For particles larger than a few microns, electrostatic effects have been invoked to account for longer-than-predicted atmospheric residence times. Although much effort has focused on elucidatin… ▽ More Windblown dust plays critical roles in numerous geophysical and biological systems, yet current models fail to explain the transport of coarse-mode particles (>5 $μ$m) to great distances from their sources. For particles larger than a few microns, electrostatic effects have been invoked to account for longer-than-predicted atmospheric residence times. Although much effort has focused on elucidating the charging processes, comparatively little effort has been expended understanding the stability of charge on particles once electrified. Overall, electrostatic-driven transport requires that charge remain present on particles for days to weeks. Here, we present a set of experiments designed to explore the longevity of electrostatic charge on levitated airborne particles after a single charging event. Using an acoustic levitator, we measured the charge on particles of different material compositions suspended in atmospheric conditions for long periods of time. In dry environments, the total charge on particles decayed in over 1 week. The decay timescale decreased to days in humid environments. These results were independent of particle material and charge polarity. However, exposure to UV radiation could both increase or decrease the decay time depending on polarity. Our work suggests that the rate of charge decay on airborne particles is solely determined by ion capture from the air. Furthermore, using a one-dimensional sedimentation model, we predict that atmospheric dust of order 10 $μ$m will experience the largest change in residence time due to electrostatic forces. △ Less

Submitted 21 June, 2022; v1 submitted 14 June, 2022; originally announced June 2022.

Comments: Main Paper - 8 pages, 5 figures LevChargeSupplementalArxiv.pdf - is the supplemental information which is an additional 3 pages with 3 figures

Aeolian sediment transport on Io from lava-frost interactions

Authors: George D. McDonald, Joshua Méndez Harper, Lujendra Ojha, Paul Corlies, Josef Dufek, Ryan C. Ewing, Laura Kerber

Abstract: Surface modification on Jupiter's volcanically active moon, Io, has to date been attributed almost exclusively to lava emplacement and volcanic plume deposits. Here we demonstrate that wind-blown transport of sediment may also be altering the Ionian surface. Specifically, shallow subsurface interactions between lava and Io's widespread sulfur dioxide (SO$_2$) frost can produce localized sublimatio… ▽ More Surface modification on Jupiter's volcanically active moon, Io, has to date been attributed almost exclusively to lava emplacement and volcanic plume deposits. Here we demonstrate that wind-blown transport of sediment may also be altering the Ionian surface. Specifically, shallow subsurface interactions between lava and Io's widespread sulfur dioxide (SO$_2$) frost can produce localized sublimation vapor flows with sufficient gas densities to enable particle saltation. We calculate anticipated outgassing velocities from lava-SO$_2$ frost interactions, and compare these to the saltation thresholds predicted when accounting for the tenuous nature of the sublimated vapor. We find that saltation may occur if frost temperatures surpass 155 K. Finally we make the first measurements of the dimensions of linear features in images from the Galileo probe, previously termed "ridges", which demonstrate certain similarities to dunes on other planetary bodies. Io joins a growing list of bodies with tenuous and transient atmospheres where aeolian sediment transport may be an important control on the landscape. △ Less

Submitted 18 April, 2022; originally announced April 2022.

Comments: 17 pages, 6 figures. Published in Nature Communications

Charge injection into the atmosphere by explosive volcanic eruptions through triboelectrification and fragmentation charging

Authors: Joshua Méndez Harper, Corrado Cimarelli, Valeria Cigala, Ulrich Kueppers, Josef Dufek

Abstract: Volcanic eruptions are associated with a wide range of electrostatic effects. Increasing evidence suggests that high-altitude discharges (lightning) in maturing plumes are driven by electrification processes that require the formation of ice (analogous to processes underpinning meteorological thunderstorms). However, electrical discharges are also common at or near the volcanic vent. A number of "… ▽ More Volcanic eruptions are associated with a wide range of electrostatic effects. Increasing evidence suggests that high-altitude discharges (lightning) in maturing plumes are driven by electrification processes that require the formation of ice (analogous to processes underpinning meteorological thunderstorms). However, electrical discharges are also common at or near the volcanic vent. A number of "ice-free" electrification mechanisms have been proposed to account for this activity: fractocharging, triboelectric charging, radioactive charging, and charging through induction. Yet, the degree to which each mechanism contributes to a jet's total electrification and how electrification in the gas-thrust region influences electrostatic processes aloft remains poorly constrained. Here, we use a shock-tube to simulate overpressured volcanic jets capable of producing spark discharges in the absence of ice. These discharges may be representative of the continual radio frequency (CRF) emissions observed at a number of eruptions. Using a suite of electrostatic sensors, we demonstrate the presence of size-dependent bipolar charging (SDBC) in a discharge-bearing flow for the first time. SDBC has been readily associated with triboelectric charging in other contexts and provides direct evidence that contact and frictional electrification play significant roles in electrostatic processes in the vent and near-vent regions of an eruption. Additionally, we find that particles leaving the region where discharges occur remain moderately electrified. This degree of electrification may be sufficient to drive near-vent lightning higher in the column. Thus, near-vent discharges may be underpinned by the same electrification mechanisms driving CRF, albeit involving greater degrees of charge separation. △ Less

Submitted 9 August, 2021; v1 submitted 29 May, 2021; originally announced May 2021.

Force spectroscopy with electromagnetic tweezers

Authors: Joseph G. Piccolo, Joshua Mendez Harper, Dan Kovari, David Dunlap, Laura Finzi

Abstract: Force spectroscopy using magnetic tweezers (MT) is a powerful method to probe the physical characteristics of single polymers. Typically, molecules are functionalized for specific attachment to a glass surface at one end and a micron-scale paramagnetic beads at the other. By applying an external magnetic field, multiple molecules can be stretched and twisted simultaneously without exposure to pote… ▽ More Force spectroscopy using magnetic tweezers (MT) is a powerful method to probe the physical characteristics of single polymers. Typically, molecules are functionalized for specific attachment to a glass surface at one end and a micron-scale paramagnetic beads at the other. By applying an external magnetic field, multiple molecules can be stretched and twisted simultaneously without exposure to potentially damaging radiation. The majority of MT utilize moving permanent magnets to produce the forces on the beads (and the molecule under test). However, translating and rotating the permanent magnets may require expensive precision actuators, limits the rate at which force is changed, and may induce vibrations that disturb tether dynamics. Alternatively, the magnetic field can be produced through an electromagnet which allows much faster force modulation and eliminates motor-associated vibration. Here, we describe a low-cost quadrapolar electromagnetic tweezer design capable of manipulating DNA-tethered MyOne paramagnetic beads with forces of up to 20 pN. The solid-state nature of the generated B-field modulated along two axes is convenient for accessing the range of forces and torques relevant for studying the activity of DNA motor enzymes like polymerases and helicases. Our design specifically leverages technology available at an increasing number university maker spaces and student-run machine shops. Thus, our design is not only applicable to a wide range biophysical research questions, but also an accessible tool for undergraduate education. △ Less

Submitted 27 April, 2021; v1 submitted 2 March, 2021; originally announced March 2021.

Comments: 7 pages, 7 figures

Relaxation and Recovery in Hydrogel Friction on Smooth Surfaces

Authors: Brady Wu, Joshua Méndez Harper, Justin C. Burton

Abstract: \textbf{Background} Hydrogels are crosslinked polymer networks that can absorb and retain a large fraction of liquid. Near a critical sliding velocity, hydrogels pressed against smooth surfaces exhibit time-dependent frictional behavior occurring over multiple timescales, yet the origin of these dynamics is unresolved. \textbf{Objective} Here, we characterize this time-dependent regime and show th… ▽ More \textbf{Background} Hydrogels are crosslinked polymer networks that can absorb and retain a large fraction of liquid. Near a critical sliding velocity, hydrogels pressed against smooth surfaces exhibit time-dependent frictional behavior occurring over multiple timescales, yet the origin of these dynamics is unresolved. \textbf{Objective} Here, we characterize this time-dependent regime and show that it is consistent with two distinct molecular processes: sliding-induced relaxation and quiescent recovery. \textbf{Methods} Our experiments use a custom pin-on-disk tribometer to examine poly(acrylic acid) hydrogels on smooth poly(methyl methacrylate) surfaces over a variety of sliding conditions, from minutes to hours. \textbf{Results} We show that at a fixed sliding velocity, the friction coefficient decays exponentially and reaches a steady-state value. The time constant associated with this decay varies exponentially with the sliding velocity, and is sensitive to any precedent frictional shearing of the interface. This process is reversible; upon cessation of sliding, the friction coefficient recovers to its original state. We also show that the initial direction of shear can be imprinted as an observable "memory", and is visible after 24 hrs of repeated frictional shearing. \textbf{Conclusions} We attribute this behavior to nanoscale extension and relaxation dynamics of the near-surface polymer network, leading to a model of frictional relaxation and recovery with two parallel timescales. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Comments: 22 pages, 8 Figures

The Minimum Leidenfrost Temperature on Smooth Surfaces

Authors: Dana Harvey, Joshua Mendez Harper, Justin C. Burton

Abstract: During the Leidenfrost effect, a thin insulating vapor layer separates an evaporating liquid from a hot solid. Here we demonstrate that Leidenfrost vapor layers can be sustained at much lower temperatures than those required for formation. Using a high-speed electrical technique to measure the thickness of water vapor layers over smooth, metallic surfaces, we find that the explosive failure point… ▽ More During the Leidenfrost effect, a thin insulating vapor layer separates an evaporating liquid from a hot solid. Here we demonstrate that Leidenfrost vapor layers can be sustained at much lower temperatures than those required for formation. Using a high-speed electrical technique to measure the thickness of water vapor layers over smooth, metallic surfaces, we find that the explosive failure point is nearly independent of material and fluid properties, suggesting a purely hydrodynamic mechanism determines this threshold. For water vapor layers of several millimeters in size, the minimum temperature for stability is $\approx 140^{\circ}$C, corresponding to an average vapor layer thickness of 10-20$μ$m. △ Less

Submitted 4 August, 2021; v1 submitted 20 October, 2020; originally announced October 2020.

Comments: 6 pages, 4 figures, Supplemental information attached. Supplemental videos available upon request

Journal ref: Phys. Rev. Lett. 127, 104501 (2021)

Detection of spark discharges in an agitated Mars dust simulant isolated from foreign surfaces

Authors: Joshua Méndez Harper, Josef Dufek, George McDonald

Abstract: Numerous laboratory experiments, starting in the Viking Lander era, have reported that frictional interactions between Martian analog dust grains can catalyze electrostatic processes (i.e. triboelectrification). Such findings have been cited to suggest that Martian dust devils and dust storms may sustain lightning storms, glow discharges, and other complex electrostatic phenomena. However, in many… ▽ More Numerous laboratory experiments, starting in the Viking Lander era, have reported that frictional interactions between Martian analog dust grains can catalyze electrostatic processes (i.e. triboelectrification). Such findings have been cited to suggest that Martian dust devils and dust storms may sustain lightning storms, glow discharges, and other complex electrostatic phenomena. However, in many cases (if not most), these experiments allowed Martian dust simulant grains to contact foreign surfaces (for instance, the wall of an environmental chamber or other chemically dissimilar particles). A number of authors have noted that such interactions could produce charging that is not representative of processes occurring near the surface of Mars. In this work, we experimentally characterize the triboelectrification of a Martian dust simulant resulting from both isolated particle-particle collisions and particle-wall collisions under a simulated Martian environment. For the first time, we report the direct detection of spark discharges under Martian surface conditions in a flow composed solely of natural basalt and isolated from man-made surfaces. The charge densities acquired by the fluidized grains are found to be of order 10^-6 Cm^-2 (in excess of the theoretical maximum charge density for the near-surface Martian environment). Additionally, we demonstrate that the interaction of simulant particles with experimental walls can modulate the polarity of spark discharges. Our work supports the idea that small-scale spark discharges may indeed be present in Martian granular flows and may be qualitatively similar to small-scale discharges in terrestrial volcanic vents. △ Less

Submitted 20 November, 2020; v1 submitted 2 June, 2020; originally announced June 2020.

Microphysical effects of water content and temperature on the triboelectrification of volcanic ash on long timescales

Authors: Joshua Méndez Harper, Leah Courtland, Josef Dufek, Julian McAdams

Abstract: The effects of water and temperature on the triboelectrification of granular materials have been reported by numerous authors, but have not been studied robustly in the context of volcanic plumes. Here, we present the results of a set of experiments designed to elucidate how environmental conditions modulate the triboelectric characteristics of volcanic ash. We find that that small amounts of wate… ▽ More The effects of water and temperature on the triboelectrification of granular materials have been reported by numerous authors, but have not been studied robustly in the context of volcanic plumes. Here, we present the results of a set of experiments designed to elucidate how environmental conditions modulate the triboelectric characteristics of volcanic ash. We find that that small amounts of water can reduce the charge collected by micron-sized ash grains by up to an order of magnitude. Increasing temperature at a constant relative humidity also appears to decrease the amount of charge gained by particles. Analysis of our data shows that if particles undergo low-energy, low-frequency collisions in humid environments under long timescales, charge dissipation dominates over charge accumulation. Thus, our work suggests that triboelectric charging may be an inefficient electrification mechanism outside of the gas-thrust region where collision rates are high and residence times are low. △ Less

Submitted 4 February, 2020; v1 submitted 12 August, 2019; originally announced August 2019.

The origin of large amplitude oscillations of dust particles in a plasma sheath

Authors: Joshua Méndez Harper, Guram Gogia, Brady Wu, Zachary Laseter, Justin C. Burton

Abstract: Micron-size charged particles can be easily levitated in low-density plasma environments. At low pressures, suspended particles have been observed to spontaneously oscillate around an equilibrium position. In systems of many particles, these oscillations can catalyze a variety of nonequilibrium, collective behaviors. Here, we report spontaneous oscillations of single particles that remain stable f… ▽ More Micron-size charged particles can be easily levitated in low-density plasma environments. At low pressures, suspended particles have been observed to spontaneously oscillate around an equilibrium position. In systems of many particles, these oscillations can catalyze a variety of nonequilibrium, collective behaviors. Here, we report spontaneous oscillations of single particles that remain stable for minutes with striking regularity in amplitude and frequency. The oscillation amplitude can also exceed 1 cm, nearly an order of magnitude larger than previously observed. Using an integrated experimental and numerical approach, we show how the motion of an individual particle can be used to extract the electrostatic force and equilibrium charge variation in the plasma sheath. Additionally, using a delayed-charging model, we are able to accurately capture the nonlinear dynamics of the particle motion, and estimate the particle's equilibrium charging time in the plasma environment. △ Less

Submitted 8 June, 2020; v1 submitted 8 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Research 2, 033500 (2020)