-
Tensor-valued and frequency-dependent diffusion MRI and magnetization transfer saturation MRI evolution during adult mouse brain maturation
Authors:
Naila Rahman,
Jake Hamilton,
Kathy Xu,
Arthur Brown,
Corey A. Baron
Abstract:
Although rodent models are a predominant study model in neuroscience research, research investigating healthy rodent brain maturation remains limited. This motivates further study of normal brain maturation in rodents to exclude confounds of developmental changes from interpretations of disease mechanisms. 11 C57Bl/6 mice (6 males) were scanned longitudinally at 3, 4, 5, and 8 months of age using…
▽ More
Although rodent models are a predominant study model in neuroscience research, research investigating healthy rodent brain maturation remains limited. This motivates further study of normal brain maturation in rodents to exclude confounds of developmental changes from interpretations of disease mechanisms. 11 C57Bl/6 mice (6 males) were scanned longitudinally at 3, 4, 5, and 8 months of age using frequency-dependent and tensor-valued diffusion MRI (dMRI), and Magnetization Transfer saturation (MTsat) MRI. Total kurtosis showed significant increases over time in all regions, which was driven by increases in isotropic kurtosis while anisotropic kurtosis remained stable. Increases in total and isotropic kurtosis with age were matched with increases in MTsat. Quadratic fits revealed that most metrics show a maximum/minimum around 5-6 months of age. Most dMRI metrics revealed significantly different trajectories between males and females, while the MT metrics did not. Linear fits between kurtosis and MT metrics highlighted that changes in total kurtosis found throughout normal brain development are driven by isotropic kurtosis, while differences in total kurtosis between brain regions are driven by anisotropic kurtosis. Overall, the trends observed in conventional dMRI and MT metrics are comparable to previous studies on normal brain development, while the trajectories of our more advanced dMRI metrics provide novel insight. Based on the developmental trajectories of tensor-valued dMRI and MT metrics, our results suggest myelination during brain maturation is not a main contributor to microscopic diffusion anisotropy and anisotropic kurtosis in axons. For studies that only calculate total kurtosis, we suggest caution in attributing neurobiological changes to changes in total kurtosis as we show here constant anisotropic kurtosis in the presence of increasing myelin content.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Robust frequency-dependent diffusion kurtosis computation using an efficient direction scheme, axisymmetric modelling, and spatial regularization
Authors:
J. Hamilton,
K. Xu,
A. Brown,
C. A. Baron
Abstract:
Frequency-dependent diffusion MRI (dMRI) using oscillating gradient encoding and diffusion kurtosis imaging (DKI) techniques have been shown to provide additional insight into tissue microstructure compared to conventional dMRI. However, a technical challenge when combining these techniques is that the generation of the large b-values required for DKI is difficult when using oscillating gradient d…
▽ More
Frequency-dependent diffusion MRI (dMRI) using oscillating gradient encoding and diffusion kurtosis imaging (DKI) techniques have been shown to provide additional insight into tissue microstructure compared to conventional dMRI. However, a technical challenge when combining these techniques is that the generation of the large b-values required for DKI is difficult when using oscillating gradient diffusion encoding. While efficient encoding schemes can enable larger b-values by maximizing multiple gradient channels simultaneously, they do not have sufficient directions to enable fitting of the full kurtosis tensor. Accordingly, we investigate a DKI fitting algorithm that combines axisymmetric DKI fitting, a prior that enforces the same axis of symmetry for all oscillating gradient frequencies, and spatial regularization, which together enable robust DKI fitting for a 10-direction scheme that offers double the b-value compared to traditional direction schemes. Using data from mice (oscillating frequencies of 0, 60, and 120 Hz) and humans (0 Hz only), we first show that axisymmetric modelling is advantageous over full kurtosis tensor fitting in terms of preserving contrast and reducing noise in DKI maps, and improved DKI map quality when using an efficient encoding scheme with averaging as compared to a traditional scheme with more encoding directions. We also demonstrate how spatial regularization during fitting preserves spatial features better than using Gaussian filtering prior to fitting, which is an oft-reported preprocessing step for DKI, and that enforcing consistent axes of symmetries across frequencies improves fitting quality. Thus, the use of an efficient 10-direction scheme combined with the proposed DKI fitting algorithm provides robust maps of frequency-dependent directional kurtosis parameters that can be used to explore novel biomarkers for various pathologies.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Six Bits
Authors:
Andrew J. S. Hamilton
Abstract:
The spinors of the group Spin($N$) of rotations in $N$ spacetime dimensions are indexed by a bitcode with [$N$/2] bits. A well-known promising grand unified group that contains the standard-model group is Spin(10). Fermions in the standard model are described by five bits $yzrgb$, consisting of two weak bits $y$ and $z$, and three color bits $r$, $g$, $b$. If a sixth bit $t$ is added, necessary to…
▽ More
The spinors of the group Spin($N$) of rotations in $N$ spacetime dimensions are indexed by a bitcode with [$N$/2] bits. A well-known promising grand unified group that contains the standard-model group is Spin(10). Fermions in the standard model are described by five bits $yzrgb$, consisting of two weak bits $y$ and $z$, and three color bits $r$, $g$, $b$. If a sixth bit $t$ is added, necessary to accommodate a time dimension, then the enlarged Spin(11,1) geometric algebra contains the standard model and Dirac algebras as commuting subalgebras, unifying the four forces of Nature. There is a unique minimal symmetry-breaking chain and associated multiplet of Higgs fields that breaks Spin(11,1) to the standard model. Unification to the Pati-Salam group Spin(4)$_w {\times}$ Spin(6)$_c$ is predicted at $10^{12}\,$GeV, and grand unification at $10^{15}\,$GeV. The grand Higgs field breaks $t$-symmetry, can drive cosmological inflation, and generates a large Majorana mass for the right-handed neutrino by flip** its $t$-bit. The electroweak Higgs field breaks $y$-symmetry, and generates masses for fermions by flip** their $y$-bit.
△ Less
Submitted 31 July, 2023;
originally announced August 2023.
-
Unification of the four forces in the Spin(11,1) geometric algebra
Authors:
Andrew J. S. Hamilton,
Tyler McMaken
Abstract:
SO(10), or equivalently its covering group Spin(10), is a well-known promising grand unified group that contains the standard-model group. The spinors of the group Spin($N$) of rotations in $N$ spacetime dimensions are indexed by a bitcode with $[N/2]$ bits. Fermions in Spin(10) are described by five bits $yzrgb$, consisting of two weak bits $y$ and $z$, and three colour bits $r$, $g$, $b$. If a s…
▽ More
SO(10), or equivalently its covering group Spin(10), is a well-known promising grand unified group that contains the standard-model group. The spinors of the group Spin($N$) of rotations in $N$ spacetime dimensions are indexed by a bitcode with $[N/2]$ bits. Fermions in Spin(10) are described by five bits $yzrgb$, consisting of two weak bits $y$ and $z$, and three colour bits $r$, $g$, $b$. If a sixth bit $t$ is added, necessary to accommodate a time dimension, then the enlarged Spin(11,1) algebra contains the standard-model and Dirac algebras as commuting subalgebras, unifying the four forces. The minimal symmetry breaking chain that breaks Spin(11,1) to the standard model is unique, proceeding via the Pati-Salam group. The minimal Higgs sector is similarly unique, consisting of the dimension~66 adjoint representation of Spin(11,1); in effect, the scalar Higgs sector matches the vector gauge sector. Although the unified algebra is that of Spin(11,1), the persistence of the electroweak Higgs field after grand symmetry breaking suggests that the gauge group before grand symmetry breaking is Spin(10,1), not the full group Spin(11,1). The running of coupling parameters predicts that the standard model should unify to the Pati-Salam group Spin(4)$_w \times$Spin(6)$_c$ at $10^{12}\,$GeV, and thence to Spin(10,1) at $10^{15}\,$GeV. The grand Higgs field breaks $t$-symmetry, can drive cosmological inflation, and generates a large Majorana mass for the right-handed neutrino by flip** its $t$-bit. The electroweak Higgs field breaks $y$-symmetry, and generates masses for fermions by flip** their $y$-bit.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
Broadband dielectric characterization systems for food materials
Authors:
J. K. Hamilton,
C. P. Gallagher,
C. R. Lawrence,
J. R. Bows
Abstract:
A detailed knowledge of the dielectric properties of food materials is vital to any electromagnetic-based treatments, ranging from reheating meals in a domestic microwave oven through to sterilization processes. The uniformity and rate of heating of the food is highly dependent upon the dielectric constant and dielectric loss of the food material, with both parameters being intrinsically temperatu…
▽ More
A detailed knowledge of the dielectric properties of food materials is vital to any electromagnetic-based treatments, ranging from reheating meals in a domestic microwave oven through to sterilization processes. The uniformity and rate of heating of the food is highly dependent upon the dielectric constant and dielectric loss of the food material, with both parameters being intrinsically temperature-dependent. In this work, we explore various methods for the dielectric characterisation of materials over a wide frequency range (1 MHz to 20 GHz), to cover RF and microwave frequencies, as well as understand the impact of ingredients (e.g. salt, sugar) and temperature on free and bound water resonances. Such a large frequency range gives information that is invaluable when designing future equipment that relies on multi-frequency/broadband microwave heating techniques. The characterization methods of interest are the open-ended coaxial dielectric probe, the broadband dielectric broadband spectrometer, and a custom stripline resonator. Instant mashed potato is used as a food standard, which allowing for a large set of samples to be measured with various moisture contents. When directly compared at 1 GHz, all three methods produced comparable dielectric properties for 20% and 30% potato mixtures.
△ Less
Submitted 22 March, 2023;
originally announced March 2023.
-
Scaling laws and a general theory for the growth of public companies
Authors:
Jiang Zhang,
Christopher P. Kempes,
Marcus J. Hamilton,
Ruyi Tao,
Geoffrey B. West
Abstract:
Publicly traded companies are fundamental units of contemporary economies and markets and are important mechanisms through which humans interact with their environments. Understanding the general properties that underlie the processes of their growth has long been of interest, yet fundamental debates about the effects of firm size on growth have persisted. Here we develop a scaling framework that…
▽ More
Publicly traded companies are fundamental units of contemporary economies and markets and are important mechanisms through which humans interact with their environments. Understanding the general properties that underlie the processes of their growth has long been of interest, yet fundamental debates about the effects of firm size on growth have persisted. Here we develop a scaling framework that focuses on company size as the critical feature determining a variety of tradeoffs, and use this to reveal novel systematic behavior across the diversity of publicly-traded companies. Using a large database of 31,553 US companies over nearly 70 years, and 3,160 Chinese companies over 24 year, we show how the dynamics of companies expressed as scaling relationships leads to a quantitative, analytic theory for their growth. This theory produces several predictions that are in good agreement with data for both the US and China, whose markets have strikingly different histories and underlying structures. In both cases sales scale sublinearly with assets and exhibit nearly identical exponents leading, surprisingly and nontrivially, to assets that grow as a power law in time rather than exponentially, as often assumed. On the other hand, liabilities scale linearly in the US (exponent of $1.0$) but superlinearly in China (exponent of $1.09$). We show that such small differences in scaling exponents can have a significant impact on the character and long-term evolution of growth trajectories. These results illustrate that while companies are part of a larger class of growth phenomena driven by incomes and costs that scale with size, they are unique in that they grow following a temporal power-function which sets them apart from organisms, cities, nations, and markets, whose growth over time is often exponential.
△ Less
Submitted 6 July, 2022; v1 submitted 21 September, 2021;
originally announced September 2021.
-
QUBIC VII: The feedhorn-switch system of the technological demonstrator
Authors:
F. Cavaliere,
A. Mennella,
M. Zannoni,
P. Battaglia,
E. S. Battistelli,
D. Burke,
G. D'Alessandro,
P. de Bernardis,
M. De Petris,
C. Franceschet,
L. Grandsire,
J. -Ch. Hamilton,
B. Maffei,
E. Manzan,
S. Marnieros,
S. Masi,
C. O'Sullivan,
A. Passerini,
F. Pezzotta,
M. Piat,
A. Tartari,
S. A. Torchinsky,
D. Viganò,
F. Voisin,
P. Ade
, et al. (106 additional authors not shown)
Abstract:
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration…
▽ More
We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies.
△ Less
Submitted 1 April, 2022; v1 submitted 28 August, 2020;
originally announced August 2020.
-
QUBIC V: Cryogenic system design and performance
Authors:
S. Masi,
E. S. Battistelli,
P. de Bernardis,
C. Chapron,
F. Columbro,
G. D'Alessandro,
M. De Petris,
L. Grandsire,
J. -Ch. Hamilton,
S. Marnieros,
L. Mele,
A. May,
A. Mennella,
C. O'Sullivan,
A. Paiella,
F. Piacentini,
M. Piat,
L. Piccirillo,
G. Presta,
A. Schillaci,
A. Tartari,
J. -P. Thermeau,
S. A. Torchinsky,
F. Voisin,
M. Zannoni
, et al. (104 additional authors not shown)
Abstract:
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe…
▽ More
Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes.
△ Less
Submitted 25 August, 2021; v1 submitted 24 August, 2020;
originally announced August 2020.
-
A Conceptual Design Study of a Compact Photon Source (CPS) for Jefferson Lab
Authors:
D. Day,
P. Degtiarenko,
S. Dobbs,
R. Ent,
D. J. Hamilton,
T. Horn,
D. Keller,
C. Keppel,
G. Niculescu,
P. Reid,
I. Strakovsky,
B. Wojtsekhowski,
J. Zhang
Abstract:
This document describes the technical design concept of a compact high intensity, multi-GeV photon source. Capable of producing 10^12 equivalent photons per second this novel device will provide unprecedented access to physics processes with very small scattering probabilities such as hard exclusive reactions on the nucleon. When combined with dynamic nuclear polarized targets, its deployment will…
▽ More
This document describes the technical design concept of a compact high intensity, multi-GeV photon source. Capable of producing 10^12 equivalent photons per second this novel device will provide unprecedented access to physics processes with very small scattering probabilities such as hard exclusive reactions on the nucleon. When combined with dynamic nuclear polarized targets, its deployment will result in a large gain in polarized experiment figure-of-merit compared to all previous measurements. Compared to a traditional bremsstrahlung photon source the proposed concept presents several advantages, most significantly in providing a full intensity in a small spot at the target and in taking advantage of the narrow angular spread associated with high energy bremsstrahlung compare to the wide angular distribution of the secondary radiation to minimize the operational prompt and activation radiation dose rates.
△ Less
Submitted 11 December, 2019;
originally announced December 2019.
-
Thermal architecture for the QUBIC cryogenic receiver
Authors:
A. J. May,
C. Chapron,
G. Coppi,
G. D'Alessandro,
P. de Bernardis,
S. Masi,
S. Melhuish,
M. Piat,
L. Piccirillo,
A. Schillaci,
J. -P. Thermeau,
P. Ade,
G. Amico,
D. Auguste,
J. Aumont,
S. Banfi,
G. Barbara,
P. Battaglia,
E. Battistelli,
A. Bau,
B. Belier,
D. Bennett,
L. Berge,
J. -Ph. Bernard,
M. Bersanelli
, et al. (105 additional authors not shown)
Abstract:
QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt…
▽ More
QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Cross Sections for Electron Collisions with NF$_3$
Authors:
Mi-Young Song,
Jung-Sik Yoon,
Hyuck Cho,
Grzegorz P. Karwasz,
Viatcheslav Kokoouline,
Yoshiharu Nakamura,
James R. Hamilton,
Jonathan Tennyson
Abstract:
Cross section data are compiled from the literature for electron collisions with nitrogen trifluoride (NF$_3$) molecules. Cross sections are collected and reviewed for total scattering, elastic scattering, momentum transfer, excitations of rotational and vibrational states, dissociation, ionization, and dissociative attachment. For each of these processes, the recommended values of the cross secti…
▽ More
Cross section data are compiled from the literature for electron collisions with nitrogen trifluoride (NF$_3$) molecules. Cross sections are collected and reviewed for total scattering, elastic scattering, momentum transfer, excitations of rotational and vibrational states, dissociation, ionization, and dissociative attachment. For each of these processes, the recommended values of the cross sections are presented. The literature has been surveyed up to the end of 2016.
△ Less
Submitted 5 January, 2018;
originally announced January 2018.
-
QDB: a new database of plasma chemistries and reactions
Authors:
Jonathan Tennyson,
Sara Rahimi,
Christian Hill,
Lisa Tse,
Anuradha Vibhakar,
Dolica Akello-Egwel,
Daniel B. Brown,
Anna Dzarasova,
James R. Hamilton,
Dagmar Jaksch,
Sebastian Mohr,
Keir Wren-Little,
Johannes Bruckmeier,
Ankur Agarwal,
Klaus Bartschat,
Annemie Bogaerts,
Jean-Paul Booth,
Matthew J. Goeckner,
Khaled Hassouni,
Yukikazu Itikawa,
Bastiaan J Braams,
E. Krishnakumar,
Annarita Laricchiuta,
Nigel J. Mason,
Sumeet Pandey
, et al. (9 additional authors not shown)
Abstract:
One of the most challenging and recurring problems when modelling plasmas is the lack of data on key atomic and molecular reactions that drive plasma processes. Even when there are data for some reactions, complete and validated datasets of chemistries are rarely available. This hinders research on plasma processes and curbs development of industrial applications. The QDB project aims to address t…
▽ More
One of the most challenging and recurring problems when modelling plasmas is the lack of data on key atomic and molecular reactions that drive plasma processes. Even when there are data for some reactions, complete and validated datasets of chemistries are rarely available. This hinders research on plasma processes and curbs development of industrial applications. The QDB project aims to address this problem by providing a platform for provision, exchange, and validation of chemistry datasets. A new data model developed for QDB is presented. QDB collates published data on both electron scattering and heavy-particle reactions. These data are formed into reaction sets, which are then validated against experimental data where possible. This process produces both complete chemistry sets and identifies key reactions that are currently unreported in the literature. Gaps in the datasets can be filled using established theoretical methods. Initial validated chemistry sets for SF$_6$/CF$_4$/O$_2$ and SF$_6$/CF$_4$/N$_2$/H$_2$ are presented as examples.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
The ecological and evolutionary energetics of hunter-gatherer residential mobility
Authors:
Marcus J. Hamilton,
Jose Lobo,
Eric Rupley,
Hye** Youn,
Geoffrey B. West
Abstract:
Residential mobility is deeply entangled with all aspects of hunter-gatherer life ways, and is therefore an issue of central importance in hunter-gatherer studies. Hunter-gatherers vary widely in annual rates of residential mobility, and understanding the sources of this variation has long been of interest to anthropologists and archaeologists. Since mobility is, to a large extent, driven by the n…
▽ More
Residential mobility is deeply entangled with all aspects of hunter-gatherer life ways, and is therefore an issue of central importance in hunter-gatherer studies. Hunter-gatherers vary widely in annual rates of residential mobility, and understanding the sources of this variation has long been of interest to anthropologists and archaeologists. Since mobility is, to a large extent, driven by the need for a continuous supply of food, a natural framework for addressing this question is provided by the metabolic theory of ecology. This provides a powerful framework for formulating formal testable hypotheses concerning evolutionary and ecological constraints on the scale and variation of hunter-gatherer residential mobility. We evaluate these predictions using extant data and show strong support for the hypotheses. We show that the overall scale of hunter-gatherer residential mobility is predicted by average human body size, and the limited capacity of mobile hunter-gatherers to store energy internally. We then show that the majority of variation in residential mobility observed across cultures is predicted by energy availability in local ecosystems. Our results demonstrate that large-scale evolutionary and ecological processes, common to all plants and animals, constrain hunter-gatherers in predictable ways as they move through territories to effectively exploit resources over the course of a year. Moreover, our results extend the scope of the metabolic theory of ecology by showing how it successfully predicts variation in the behavioral ecology of populations within a species.
△ Less
Submitted 1 February, 2016;
originally announced February 2016.
-
A Helium Gas-Scintillator Active Target for Photoreaction Measurements
Authors:
R. Al Jebali,
J. R. M. Annand,
J. -O. Adler,
I. Akkurt,
E. Buchanan,
J. Brudvik,
K. Fissum,
S. Gardner,
D. J. Hamilton,
K. Hansen,
L. Isaksson,
K. Livingston,
M. Lundin,
J. C. McGeorge,
I. J. D. MacGregor,
R. MacRae,
D. G. Middleton,
A. J. H. Reiter,
G. Rosner,
B. Schröder,
J. Sjögren,
D. Sokhan,
B. Strandberg
Abstract:
A multi-cell He gas-scintillator active target, designed for the measurement of photoreaction cross sections, is described. The target has four main chambers, giving an overall thickness of 0.103 $\mathrm{g/cm^{2}}$ at an operating pressure of 2 MPa. Scintillations are read out by photomultiplier tubes and the addition of small amounts of $\mathrm{N}_{2}$ to the He, to shift the scintillation emis…
▽ More
A multi-cell He gas-scintillator active target, designed for the measurement of photoreaction cross sections, is described. The target has four main chambers, giving an overall thickness of 0.103 $\mathrm{g/cm^{2}}$ at an operating pressure of 2 MPa. Scintillations are read out by photomultiplier tubes and the addition of small amounts of $\mathrm{N}_{2}$ to the He, to shift the scintillation emission from UV to visible, is discussed. First results of measurements at the MAX IV Laboratory tagged-photon facility show that the target has good timing resolution and can cope well with a high-flux photon beam. The determination of reaction cross sections from target yields relies on a Monte Carlo simulation, which considers scintillation light transport, photodisintegration processes in $^{4}\mathrm{He}$, background photon interactions in target windows and interactions of the reaction-product particles in the gas and target container. The predictions of this simulation are compared to the measured target response.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
Characterising encapsulated nuclear waste using cosmic-ray muon tomography
Authors:
Anthony Clarkson,
David J. Hamilton,
Matthias Hoek,
David G. Ireland,
John R. Johnstone,
Ralf Kaiser,
Tibor Keri,
Scott Lumsden,
David F. Mahon,
Bryan McKinnon,
Morgan Murray,
Siân Nutbeam-Tuffs,
Craig Shearer,
Guangliang Yang,
Colin Zimmerman
Abstract:
Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons have been shown previously to successfully identify and characterise low- and high-Z materials within an air matrix using a prototype scintillating-fibre tracker system. Those studies were performed as the first in a series to assess the feasibility of this technology and image reconstruction techniques in characterisi…
▽ More
Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons have been shown previously to successfully identify and characterise low- and high-Z materials within an air matrix using a prototype scintillating-fibre tracker system. Those studies were performed as the first in a series to assess the feasibility of this technology and image reconstruction techniques in characterising the potential high-Z contents of legacy nuclear waste containers for the UK Nuclear Industry. The present work continues the feasibility study and presents the first images reconstructed from experimental data collected using this small-scale prototype system of low- and high-Z materials encapsulated within a concrete-filled stainless-steel container. Clear discrimination is observed between the thick steel casing, the concrete matrix and the sample materials assayed. These reconstructed objects are presented and discussed in detail alongside the implications for future industrial scenarios.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
The Design and Performance of a Scintillating-Fibre Tracker for the Cosmic-ray Muon Tomography of Legacy Nuclear Waste Containers
Authors:
Anthony Clarkson,
David J. Hamilton,
Matthias Hoek,
David G. Ireland,
Russell Johnstone,
Ralf Kaiser,
Tibor Keri,
Scott Lumsden,
David F. Mahon,
Bryan McKinnon,
Morgan Murray,
Sian Nutbeam-Tuffs,
Craig Shearer,
Cassie Staines,
Guangliang Yang,
Colin Zimmerman
Abstract:
Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons are increasingly being exploited for the non-destructive assay of shielded containers in a wide range of applications. One such application is the characterisation of legacy nuclear waste materials stored within industrial containers. The design, assembly and performance of a prototype muon tomography system developed…
▽ More
Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons are increasingly being exploited for the non-destructive assay of shielded containers in a wide range of applications. One such application is the characterisation of legacy nuclear waste materials stored within industrial containers. The design, assembly and performance of a prototype muon tomography system developed for this purpose are detailed in this work. This muon tracker comprises four detection modules, each containing orthogonal layers of Saint-Gobain BCF-10 2mm-pitch plastic scintillating fibres. Identification of the two struck fibres per module allows the reconstruction of the incoming and Coulomb-scattered muon trajectories. These allow the container content, with respect to the atomic number Z of the scattering material, to be determined through reconstruction of the scattering location and magnitude. On each detection layer, the light emitted by the fibre is detected by a single Hamamatsu H8500 MAPMT with two fibres coupled to each pixel via dedicated pairing schemes developed to ensure the identification of the struck fibre. The PMT signals are read out to QDCs. The design and assembly of the detector system are detailed and presented alongside results from performance studies with data collected after construction. These results reveal high stability during extended collection periods with detection efficiencies in the region of 80% per layer. Minor misalignments of millimetre order have been identified and corrected in software. A first image reconstructed from a test configuration of materials has been obtained using software based on the Maximum Likelihood Expectation Maximisation algorithm. The results highlight the high spatial resolution provided by the detector system. Clear discrimination between the low, medium and high-Z materials assayed is also observed.
△ Less
Submitted 7 October, 2013;
originally announced October 2013.
-
What have we learned from observational cosmology ?
Authors:
Jean-Christophe Hamilton
Abstract:
We review the observational foundations of the $Λ$CDM model, considered by most cosmologists as the standard model of cosmology. The Cosmological Principle, a key assumption of the model is shown to be verified with increasing accuracy. The fact that the Universe seems to have expanded from and hot and dense past is supported by many independent probes (galaxy redshifts, Cosmic Microwave Backgroun…
▽ More
We review the observational foundations of the $Λ$CDM model, considered by most cosmologists as the standard model of cosmology. The Cosmological Principle, a key assumption of the model is shown to be verified with increasing accuracy. The fact that the Universe seems to have expanded from and hot and dense past is supported by many independent probes (galaxy redshifts, Cosmic Microwave Background, Big-Bang Nucleosynthesis and reionization). The explosion of detailed observations in the last few decades has allowed for precise measurements of the cosmological parameters within Friedman-Lemaître-Robertson-Walker cosmologies leading to the $Λ$CDM model: an apparently flat Universe, dominated by a cosmological constant, whose matter component is dominantly dark. We describe and discuss the various observational probes that led to this conclusion and conclude that the $Λ$CDM model, although leaving a number of open questions concerning the deep nature of the constituents of the Universe, provides the best theoretical framework to explain the observations.
△ Less
Submitted 16 April, 2013;
originally announced April 2013.
-
Intensity and polarization of the atmospheric emission at millimetric wavelengths at Dome Concordia
Authors:
E. S. Battistelli,
G. Amico,
A. Baù,
L. Bergé,
É. Bréelle,
R. Charlassier,
S. Collin,
A. Cruciani,
P. de Bernardis,
C. Dufour,
L. Dumoulin,
M. Gervasi,
M. Giard,
C. Giordano,
Y. Giraud-Héraud,
L. Guglielmi,
J. -C. Hamilton,
J. Landé,
B. Maffei,
M. Maiello,
S. Marnieros,
S. Masi,
A. Passerini,
F. Piacentini,
M. Piat
, et al. (10 additional authors not shown)
Abstract:
Atmospheric emission is a dominant source of disturbance in ground-based astronomy at mm wavelengths. The Antarctic plateau is recognized to be an ideal site for mm and sub-mm observations, and the French/Italian base of Dome C is among the best sites on Earth for these observations. In this paper we present measurements, performed using the BRAIN-pathfinder experiment, at Dome C of the atmospheri…
▽ More
Atmospheric emission is a dominant source of disturbance in ground-based astronomy at mm wavelengths. The Antarctic plateau is recognized to be an ideal site for mm and sub-mm observations, and the French/Italian base of Dome C is among the best sites on Earth for these observations. In this paper we present measurements, performed using the BRAIN-pathfinder experiment, at Dome C of the atmospheric emission in intensity and polarization at 150GHz, one of the best observational frequencies for CMB observations when considering cosmic signal intensity, atmospheric transmission, detectors sensitivity, and foreground removal. Careful characterization of the air-mass synchronous emission has been performed, acquiring more that 380 elevation scans (i.e. "skydip") during the third BRAIN-pathfinder summer campaign in December 2009/January 2010. The extremely high transparency of the Antarctic atmosphere over Dome Concordia is proven by the very low measured optical depth: <tau_I>=0.050 \pm 0.003 \pm 0.011 where the first error is statistical and the second is systematic error. Mid term stability, over the summer campaign, of the atmosphere emission has also been studied. Adapting the radiative transfer atmosphere emission model "am" to the particular conditions found at Dome C, we also infer the level of the PWV content of the atmosphere, notoriously the main source of disturbance in millimetric astronomy (<PWV>=0.77 +/- 0.06 + 0.15 - 0.12 mm). Upper limits on the air-mass correlated polarized signal are also placed for the first time. The degree of circular polarization of atmospheric emission is found to be lower than 0.2% (95%CL), while the degree of linear polarization is found to be lower than 0.1% (95%CL). These limits include signal-correlated instrumental spurious polarization.
△ Less
Submitted 20 April, 2012; v1 submitted 26 March, 2012;
originally announced March 2012.
-
An Electromagnetic Calorimeter for the JLab Real Compton Scattering Experiment
Authors:
D. J. Hamilton,
A. Shahinyan,
B. Wojtsekhowski,
J. R. M. Annand,
T. -H. Chang,
E. Chudakov,
A. Danagoulian,
P. Degtyarenko,
K. Egiyan,
R. Gilman,
V. Gorbenko,
J. Hines,
E. Hovhannisyan,
C. E. Hyde-Wright,
C. W. de Jager,
A. Ketikyan,
V. H. Mamyan,
R. Michaels,
A. M. Nathan,
V. Nelyubin,
I. Rachek,
M. Roedelbrom,
A. Petrosyan,
R. Pomatsalyuk,
V. Popov
, et al. (4 additional authors not shown)
Abstract:
A lead-glass hodoscope calorimeter that was constructed for use in the Jefferson Lab Real Compton Scattering experiment is described. The detector provides a measurement of the coordinates and the energy of scattered photons in the GeV energy range with resolutions of 5 mm and 6%/\sqrt(Eγ [GeV]). Features of both the detector design and its performance in the high luminosity environment during the…
▽ More
A lead-glass hodoscope calorimeter that was constructed for use in the Jefferson Lab Real Compton Scattering experiment is described. The detector provides a measurement of the coordinates and the energy of scattered photons in the GeV energy range with resolutions of 5 mm and 6%/\sqrt(Eγ [GeV]). Features of both the detector design and its performance in the high luminosity environment during the experiment are presented.
△ Less
Submitted 25 September, 2015; v1 submitted 14 April, 2007;
originally announced April 2007.
-
The BaBar Event Building and Level-3 Trigger Farm Upgrade
Authors:
S. Luitz,
R. Bartoldus,
S. Dasu,
G. Dubois-Felsmann,
B. Franek,
J. Hamilton,
R. Jacobsen,
D. Kotturi,
I. Narsky,
C. O'Grady,
A. Perazzo,
R. Rodriguez,
E. Rosenberg,
A. Salnikov,
M. Weaver,
M. Wittgen
Abstract:
The BaBar experiment is the particle detector at the PEP-II B-factory facility at the Stanford Linear Accelerator Center. During the summer shutdown 2002 the BaBar Event Building and Level-3 trigger farm were upgraded from 60 Sun Ultra-5 machines and 100MBit/s Ethernet to 50 Dual-CPU 1.4GHz Pentium-III systems with Gigabit Ethernet. Combined with an upgrade to Gigabit Ethernet on the source side…
▽ More
The BaBar experiment is the particle detector at the PEP-II B-factory facility at the Stanford Linear Accelerator Center. During the summer shutdown 2002 the BaBar Event Building and Level-3 trigger farm were upgraded from 60 Sun Ultra-5 machines and 100MBit/s Ethernet to 50 Dual-CPU 1.4GHz Pentium-III systems with Gigabit Ethernet. Combined with an upgrade to Gigabit Ethernet on the source side and a major feature extraction software speedup, this pushes the performance of the BaBar event builder and L3 filter to 5.5kHz at current background levels, almost three times the original design rate of 2kHz. For our specific application the new farm provides 8.5 times the CPU power of the old system.
△ Less
Submitted 30 May, 2003;
originally announced May 2003.