-
Intensity product-based optical sensing to beat the diffraction limit in an interferometer
Authors:
Byoung S. Ham
Abstract:
The classically defined minimum uncertainty of the optical phase is known as the standard quantum limit or shot-noise limit (SNL) originating in the uncertainty principle of quantum mechanics. Based on SNL, the phase sensitivity is inversely proportional to the square root K, where K is the number of interfering photons or statistically measured events. Thus, using a high-power laser is advantageo…
▽ More
The classically defined minimum uncertainty of the optical phase is known as the standard quantum limit or shot-noise limit (SNL) originating in the uncertainty principle of quantum mechanics. Based on SNL, the phase sensitivity is inversely proportional to the square root K, where K is the number of interfering photons or statistically measured events. Thus, using a high-power laser is advantageous to enhance sensitivity due to the square root K gain in the signal-to-noise ratio. In a typical interferometer, however, the resolution remains in the diffraction limit of the K=1 case unless the interfering photons are resolved as in quantum sensing. Here, a projection-measurement method in quantum sensing is adapted for an interferometer to achieve an additional square root K gain in resolution. For the projection measurement, the interference fringe of an interferometer can be Kth-powered to replace the Kth-order intensity product. To understand many-wave interference-caused enhanced resolution, several types of interferometers are numerically compared to draw corresponding resolution parameters. As a result, the achieved resolution by the Kth power to an N-slit interferometer exceeds the diffraction limit and the Heisenberg limit in quantum sensing.
△ Less
Submitted 28 May, 2024; v1 submitted 18 March, 2024;
originally announced March 2024.
-
Role of shape in particle-lipid membrane interactions: from surfing to full engulfment
Authors:
Stijn van der Ham,
Jaime Agudo-Canalejo,
Hanumantha Rao Vutukuri
Abstract:
Understanding and manipulating the interactions between foreign bodies and cell membranes during endo- and phagocytosis is of paramount importance, not only for the fate of living cells but also for numerous biomedical applications. This study aims to elucidate the role of variables such as anisotropic particle shape, curvature, orientation, membrane tension, and adhesive strength in this essentia…
▽ More
Understanding and manipulating the interactions between foreign bodies and cell membranes during endo- and phagocytosis is of paramount importance, not only for the fate of living cells but also for numerous biomedical applications. This study aims to elucidate the role of variables such as anisotropic particle shape, curvature, orientation, membrane tension, and adhesive strength in this essential process, using a minimal experimental biomimetic system comprising giant unilamellar vesicles and rod-like particles with different curvatures and aspect ratios. We find that the particle wrap** process is dictated by the balance between the elastic energy penalty and adhesion energy gain, leading to two distinct engulfment pathways, tip-first and side-first, emphasizing the significance of the particle orientation in determining the pathway. Moreover, our experimental results are consistent with theoretical predictions in a state diagram, showcasing how to control the wrap** pathway from surfing to partial to complete wrap** by the interplay between membrane tension and adhesive strength. At moderate particle concentrations, we observed the formation of rod clusters, which exhibited cooperative and sequential wrap**. Our study not only contributes to a comprehensive understanding of the mechanistic intricacies of endocytosis by highlighting how the interplay between the anisotropic particle shape, curvature, orientation, membrane tension, and adhesive strength can influence the engulfment pathway but also provides a foundational base for future research in the field.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Elucidating the Role of Prelithiation in Si-based Anodes for Interface Stabilization
Authors:
Shuang Bai,
Wurigumula Bao,
Kun Qian,
Bing Han,
Weikang Li,
Baharak Sayahpour,
Bhagath Screenarayanan,
Darren H. S. Tan,
So-yeon Ham,
Ying Shirley Meng
Abstract:
Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiatio…
▽ More
Prelithiation as a facile and effective method to compensate the lithium inventory loss in the initial cycle has progressed considerably both on anode and cathode sides. However, much less research has been devoted to the prelithiation effect on the interface stabilization for long-term cycling of Si-based anodes. An in-depth quantitative analysis of the interface that form during the prelithiation of SiO$_x$ is presented here and the results are compared with prelithiaton of Si anodes. Local structure probe combined with detailed electrochemical analysis reveals that a characteristic mosaic interface is formed on both prelithiated SiO$_x$ and Si anodes. This mosaic interface containing multiple lithium silicates phases, is fundamentally different from the solid electrolyte interface (SEI) formed without prelithiation. The ideal conductivity and mechanical properties of lithium silicates enable improved cycling stability of both prelithiated anodes. With a higher ratio of lithium silicates due to the oxygen participation, prelithiated SiO$_{1.3}$ anode improves the initial coulombic efficiency to 94% in full cell and delivers good cycling retention after hundreds cycles under lean electrolyte conditions. The insights provided in this work could be used to further optimize high Si loading based anode in future high energy density batteries.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Carbon Free High Loading Silicon Anodes Enabled by Sulfide Solid Electrolytes for Robust All Solid-State Batteries
Authors:
Darren H. S. Tan,
Yu-Ting Chen,
Hedi Yang,
Wurigumula Bao,
Bhagath Sreenarayanan,
Jean-Marie Doux,
Weikang Li,
Bingyu Lu,
So-Yeon Ham,
Baharak Sayahpour,
Jonathan Scharf,
Erik A. Wu,
Grayson Deysher,
Hyea Eun Han,
Hoe ** Hah,
Hyeri Jeong,
Zheng Chen,
Ying Shirley Meng
Abstract:
The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characteri…
▽ More
The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characterization, as well as quantification of interfacial components showed that such an approach eliminates continuous interfacial growth and irreversible lithium losses. In uSi || layered-oxide full cells, high current densities at room temperature (5 mA cm 2), wide operating temperature (-20°C to 80°C) and high loadings (>11 mAh cm-2) were demonstrated for both charge and discharge operations. The promising battery performance can be attributed to both the desirable interfacial property between uSi and sulfide electrolytes, as well as the unique chemo-mechanical behavior of the Li-Si alloys.
△ Less
Submitted 6 March, 2021;
originally announced March 2021.
-
Imaging real-time amorphization of hybrid perovskite solar cells under electrical biasing
Authors:
Min-cheol Kim,
Namyoung Ahn,
Diyi Cheng,
Mingjie Xu,
Xiaoqing Pan,
Suk Jun Kim,
Yanqi Luo,
David P. Fenning,
Darren H. S. Tan,
Minghao Zhang,
So-Yeon Ham,
Kiwan Jeong,
Mansoo Choi,
Ying Shirley Meng
Abstract:
Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degrad…
▽ More
Perovskite solar cells have drawn much attention in recent years, owing to its world-record setting photovoltaic performances. Despite its promising use in tandem applications and flexible devices, its practicality is still limited by its structural instability often arising from ion migration and defect formation. While it is generally understood that ion instability is a primary cause for degradation, there is still a lack of direct evidence of structural transformation at the atomistic scale. Such an understanding is crucial to evaluate and pin-point how such instabilities are induced relative to external perturbations such as illumination or electrical bias with time, allowing researchers to devise effective strategies to mitigate them. Here, we designed an in-situ TEM setup to enable real-time observation of amorphization in double cation mixed perovskite materials under electrical biasing at 1 V. It is found that amorphization occurs along the (001) and (002) planes, which represents the observation of in-situ facet-dependent amorphization of a perovskite crystal. To reverse the degradation, the samples were heated at 50 oC and was found to recrystallize, effectively regaining its performance losses. This work is vital toward understanding fundamental ion-migration phenomena and address instability challenges of perovskite optoelectronics.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Stationary and quasi-stationary light pulse in three-level cold atomic system
Authors:
S. A. Moiseev,
A. I. Sidorova,
B. S. Ham
Abstract:
We have studied stationary and quasi-stationary signal light pulses in cold lambda-type atomic media driven by counterpropagating control laser fields at the condition of electromagnetically induced transparency. By deriving a dispersion relation we present spectral and temporal properties of the signal light pulse and a significant influence of atomic decoherence on the coupled stationary light p…
▽ More
We have studied stationary and quasi-stationary signal light pulses in cold lambda-type atomic media driven by counterpropagating control laser fields at the condition of electromagnetically induced transparency. By deriving a dispersion relation we present spectral and temporal properties of the signal light pulse and a significant influence of atomic decoherence on the coupled stationary light pulses for spatial splitting. Finally we discuss quasi-stationary light pulse evolution characterized by frozen spatial spreading for a robust coherent control of slow light pulses.
△ Less
Submitted 28 January, 2014;
originally announced January 2014.
-
Observations of photon echo enhancement in an ultraslow light regime
Authors:
J. Hahn,
B. S. Ham
Abstract:
Using spectral hole-burning-based ultraslow group velocity in a dilute solid medium, we report enhanced photon echo efficiency three orders of magnitude higher than that in a nonslow light regime. The enhancement is due to exponentially increased absorption of an optical data pulse owing to the enhanced photon-atom interaction in an ultraslow light regime, whereas echo reabsorption is negligibly s…
▽ More
Using spectral hole-burning-based ultraslow group velocity in a dilute solid medium, we report enhanced photon echo efficiency three orders of magnitude higher than that in a nonslow light regime. The enhancement is due to exponentially increased absorption of an optical data pulse owing to the enhanced photon-atom interaction in an ultraslow light regime, whereas echo reabsorption is negligibly small due to group-velocity dependent population depletion.
△ Less
Submitted 1 March, 2011;
originally announced March 2011.
-
Active switching in metamaterials using polarization control of light
Authors:
Hua Xu,
Byoung Seung Ham
Abstract:
We demonstrate on-demand control of localized surface plasmons in metamaterials by means of incident light polarization. An asymmetric mode, selectively excited by s-polarized light, interfere destructively with a bright element, thereby allowing the incident light to propagate at a fairly low loss, corresponding to electromagnetically induced transparency (EIT) in an atomic system. In contrast, a…
▽ More
We demonstrate on-demand control of localized surface plasmons in metamaterials by means of incident light polarization. An asymmetric mode, selectively excited by s-polarized light, interfere destructively with a bright element, thereby allowing the incident light to propagate at a fairly low loss, corresponding to electromagnetically induced transparency (EIT) in an atomic system. In contrast, a symmetric mode, excited by p-polarized light, directly couples with the incident light, which is analogous to the switch-off of EIT. The light polarization-dependent excitation of asymmetric and symmetric plasmon modes holds potential for active switching applications of plasmon hybridization.
△ Less
Submitted 11 October, 2010;
originally announced October 2010.
-
Bandwidth-Unlimited, Dispersion-Free Tunable Optical Delay Using a Prism Pair
Authors:
C. Kim,
B. S. Ham
Abstract:
We report a nearly perfect bandwidth-unlimited, dispersion-free tunable optical delay system using a prism pair. The observed delay-bandwidth product using a 25-femtosecond light pulse is ~7x104, where the delay time is independent of the signal bandwidth. The present technique breaks from the conventional methods constrained by delay-bandwidth product, nontunability, and delay time dependent op…
▽ More
We report a nearly perfect bandwidth-unlimited, dispersion-free tunable optical delay system using a prism pair. The observed delay-bandwidth product using a 25-femtosecond light pulse is ~7x104, where the delay time is independent of the signal bandwidth. The present technique breaks from the conventional methods constrained by delay-bandwidth product, nontunability, and delay time dependent optical loss.
△ Less
Submitted 17 September, 2009;
originally announced September 2009.