-
Overview of recent physics results from MAST
Authors:
A Kirk,
J Adamek,
RJ Akers,
S Allan,
L Appel,
F Arese Lucini,
M Barnes,
T Barrett,
N Ben Ayed,
W Boeglin,
J Bradley,
P K Browning,
J Brunner,
P Cahyna,
M Carr,
F Casson,
M Cecconello,
C Challis,
IT Chapman,
S Chapman,
S Conroy,
N Conway,
WA Cooper,
M Cox,
N Crocker
, et al. (138 additional authors not shown)
Abstract:
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbu…
▽ More
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbulence. At the edge detailed studies have revealed how filament characteristic are responsible for determining the near and far SOL density profiles. In the core the intrinsic rotation and electron scale turbulence have been measured. The role that the fast ion gradient has on redistributing fast ions through fishbone modes has led to a redesign of the neutral beam injector on MAST Upgrade. In H-mode the turbulence at the pedestal top has been shown to be consistent with being due to electron temperature gradient modes. A reconnection process appears to occur during ELMs and the number of filaments released determines the power profile at the divertor. Resonant magnetic perturbations can mitigate ELMs provided the edge peeling response is maximised and the core kink response minimised. The mitigation of intrinsic error fields with toroidal mode number n>1 has been shown to be important for plasma performance.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
ELM control with RMP: plasma response models and the role of edge peeling response
Authors:
Yueqiang Liu,
C. J. Ham,
A. Kirk,
Li Li,
A. Loarte,
D. A. Ryan,
Youwen Sun,
W. Suttrop,
Xu Yang,
Lina Zhou
Abstract:
Resonant magnetic perturbations (RMP) have extensively been demonstrated as a plausible technique for mitigating or suppressing large edge localized modes (ELMs). Associated with this is a substantial amount of theory and modelling efforts during recent years. Various models describing the plasma response to the RMP fields have been proposed in the literature, and are briefly reviewed in this work…
▽ More
Resonant magnetic perturbations (RMP) have extensively been demonstrated as a plausible technique for mitigating or suppressing large edge localized modes (ELMs). Associated with this is a substantial amount of theory and modelling efforts during recent years. Various models describing the plasma response to the RMP fields have been proposed in the literature, and are briefly reviewed in this work. Despite their simplicity, linear response models can provide alternative criteria, than the vacuum field based criteria, for guiding the choice of the coil configurations to achieve the best control of ELMs. The role of the edge peeling response to the RMP fields is illustrated as a key indicator for the ELM mitigation in low collisionality plasmas, in various tokamak devices.
△ Less
Submitted 5 July, 2016;
originally announced July 2016.
-
Development of the MICROMEGAS Detector for Measuring the Energy Spectrum of Alpha Particles by using a 241-Am Source
Authors:
Do Yoon Kim,
Cheolmin Ham,
Jae Won Shin,
Tae-Sun Park,
Seung-Woo Hong,
Samuel Andriamonje,
Yacine Kadi,
Claudio Tenreiro
Abstract:
We have developed MICROMEGAS (MICRO MEsh GASeous) detectors for detecting α particles emitted from an 241-Am standard source. The voltage applied to the ionization region of the detector is optimized for stable operation at room temperature and atmospheric pressure. The energy of α particles from the 241-Am source can be varied by changing the flight path of the α particle from the 241 Am source.…
▽ More
We have developed MICROMEGAS (MICRO MEsh GASeous) detectors for detecting α particles emitted from an 241-Am standard source. The voltage applied to the ionization region of the detector is optimized for stable operation at room temperature and atmospheric pressure. The energy of α particles from the 241-Am source can be varied by changing the flight path of the α particle from the 241 Am source. The channel numbers of the experimentally-measured pulse peak positions for different energies of the α particles are associated with the energies deposited by the alpha particles in the ionization region of the detector as calculated by using GEANT4 simulations; thus, the energy calibration of the MICROMEGAS detector for α particles is done. For the energy calibration, the thickness of the ionization region is adjusted so that α particles may completely stop in the ionization region and their kinetic energies are fully deposited in the region. The efficiency of our MICROMEGAS detector for α particles under the present conditions is found to be ~ 97.3 %.
△ Less
Submitted 3 May, 2016;
originally announced May 2016.
-
The Effect of Plasma Beta on High-n Ballooning Stability at Low Magnetic Shear
Authors:
J W Connor,
C J Ham,
R J Hastie
Abstract:
An explanation of the observed improvement in H-mode pedestal characteristics with increasing core plasma pressure or poloidal beta, as observed in MAST and JET, is sought in terms of the impact of the Shafranov shift, d', on ideal ballooning MHD stability.
An explanation of the observed improvement in H-mode pedestal characteristics with increasing core plasma pressure or poloidal beta, as observed in MAST and JET, is sought in terms of the impact of the Shafranov shift, d', on ideal ballooning MHD stability.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.
-
Explosive Ballooning Flux Tubes in Tokamaks
Authors:
C J Ham,
S C Cowley,
G Brochard,
H R Wilson
Abstract:
Tokamak stability to, potentially explosive, `ballooning' displacements of elliptical magnetic flux tubes is examined in large aspect ratio equilibrium. Above a critical pressure gradient the energy stored in the plasma may be lowered by finite (but not infinitesimal) displacements of such tubes (metastability). Above a higher pressure gradient, the linear stability boundary, such tubes are linear…
▽ More
Tokamak stability to, potentially explosive, `ballooning' displacements of elliptical magnetic flux tubes is examined in large aspect ratio equilibrium. Above a critical pressure gradient the energy stored in the plasma may be lowered by finite (but not infinitesimal) displacements of such tubes (metastability). Above a higher pressure gradient, the linear stability boundary, such tubes are linearly and nonlinearly unstable. The flux tube displacement can be of the order of the pressure gradient scale length. Plasma transport from displaced flux tubes may result in rapid loss of confinement.
△ Less
Submitted 10 June, 2016; v1 submitted 13 January, 2016;
originally announced January 2016.
-
Effect of resonant magnetic perturbations on low collisionality discharges in MAST and a comparison with ASDEX Upgrade
Authors:
A. Kirk,
W. Suttrop,
Yueqiang Liu,
I. T. Chapman,
P. Cahyna,
T. Eich,
C. Fuchs,
C. Ham,
J. R. Harrison,
M W. Jakubowski,
S. Pamela,
M. Peterka,
D. Ryan,
S. Saarelma,
R. Scannell,
A. J. Thornton,
M. Valovic,
B. Sieglin,
L. Barrera Orte,
M. Willensdorfer,
B. Kurzan,
R. Fischer
Abstract:
Sustained ELM mitigation has been achieved on MAST and AUG using RMPs with a range of toroidal mode numbers over a wide region of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have been reduced. The ELM mitigation phase is typically associated with a drop in plasma density and overall stored energy. In one particular scenario on MAST, by c…
▽ More
Sustained ELM mitigation has been achieved on MAST and AUG using RMPs with a range of toroidal mode numbers over a wide region of low to medium collisionality discharges. The ELM energy loss and peak heat loads at the divertor targets have been reduced. The ELM mitigation phase is typically associated with a drop in plasma density and overall stored energy. In one particular scenario on MAST, by carefully adjusting the fuelling it has been possible to counteract the drop in density and to produce plasmas with mitigated ELMs, reduced peak divertor heat flux and with minimal degradation in pedestal height and confined energy. While the applied resonant magnetic perturbation field can be a good indicator for the onset of ELM mitigation on MAST and AUG there are some cases where this is not the case and which clearly emphasise the need to take into account the plasma response to the applied perturbations. The plasma response calculations show that the increase in ELM frequency is correlated with the size of the edge peeling-tearing like response of the plasma and the distortions of the plasma boundary in the X-point region.
△ Less
Submitted 24 December, 2014;
originally announced December 2014.
-
The Role of Thermal Conduction in Tearing Mode Theory
Authors:
J. W. Connor,
C. J. Ham,
R. J. Hastie,
Y. Q. Liu
Abstract:
The role of anisotropic thermal diffusivity on tearing mode stability is analysed in general toroidal geometry. A dispersion relation linking the growth rate to the tearing mode stability parameter, Delta, is derived. By using a resistive MHD code, modified to include such thermal transport, to calculate tearing mode growth rates, the dispersion relation is employed to determine Delta in situation…
▽ More
The role of anisotropic thermal diffusivity on tearing mode stability is analysed in general toroidal geometry. A dispersion relation linking the growth rate to the tearing mode stability parameter, Delta, is derived. By using a resistive MHD code, modified to include such thermal transport, to calculate tearing mode growth rates, the dispersion relation is employed to determine Delta in situations with finite plasma pressure that are stabilised by favourable average curvature in a simple resistive MHD model. We also demonstrate that the same code can also be used to calculate the basis-functions [C J Ham, et al, Plasma Phys. Control. Fusion 54 (2012) 105014] needed to construct Delta.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Yield estimation of neutron-rich rare isotopes induced by 200 MeV/u $^{132}$Sn beams by using GEANT4
Authors:
Jae Won Shin,
Kyung Joo Min,
Cheolmin Ham,
Tae-Sun Park,
Seung-Woo Hong
Abstract:
A so-called "two-step reaction scheme", in which neutron-rich rare isotopes obtained from ISOL are post-accelerated and bombarded on a second target, is employed to estimate the production yields of exotic rare isotopes. The production yields of neutron-rich rare isotope fragments induced by 200 MeV/u $^{132}$Sn beams bombarded on a $^{9}$Be target are estimated with Monte Carlo code, GEANT4. To s…
▽ More
A so-called "two-step reaction scheme", in which neutron-rich rare isotopes obtained from ISOL are post-accelerated and bombarded on a second target, is employed to estimate the production yields of exotic rare isotopes. The production yields of neutron-rich rare isotope fragments induced by 200 MeV/u $^{132}$Sn beams bombarded on a $^{9}$Be target are estimated with Monte Carlo code, GEANT4. To substantiate the use of GEANT4 for this study, benchmark calculations are done for 80 MeV/u $^{59}$Co, 95 MeV/u $^{72}$Zn, 500 MeV/u $^{92}$Mo, and 950 MeV/u $^{132}$Sn beams on the $^{9}$Be target. It is found that $^{132}$Sn beams can produce neutron-rich rare isotopes with 45 $\leq$ Z $\leq$ 50 more effectively than $^{238}$U beams at the same energy per nucleon.
△ Less
Submitted 4 March, 2015; v1 submitted 29 September, 2014;
originally announced September 2014.
-
Modelling of three dimensional equilibrium and stability of MAST plasmas with magnetic perturbations using VMEC and COBRA
Authors:
C J Ham,
I T Chapman,
A Kirk,
S Saarelma
Abstract:
It is known that magnetic perturbations can mitigate edge localized modes (ELMs) in experiments, for example MAST (Kirk et al 2013 Nucl. Fusion 53 043007). One hypothesis is that the magnetic perturbations cause a three dimensional corrugation of the plasma and this corrugated plasma has different stability properties to peeling-ballooning modes compared to an axisymmetric plasma. It has been show…
▽ More
It is known that magnetic perturbations can mitigate edge localized modes (ELMs) in experiments, for example MAST (Kirk et al 2013 Nucl. Fusion 53 043007). One hypothesis is that the magnetic perturbations cause a three dimensional corrugation of the plasma and this corrugated plasma has different stability properties to peeling-ballooning modes compared to an axisymmetric plasma. It has been shown in an up-down symmetric plasma that magnetic perturbations in tokamaks will break the usual axisymmetry of the plasma causing three dimensional displacements (Chapman et al 2012 Plasma Phys. Control. Fusion 54 105013). We produce a free boundary three-dimensional equilibrium of a lower single null MAST relevant plasma using VMEC (S P Hirshman and J C Whitson 1983 Phys. Fluids 26 3553). The current and pressure profiles used for the modelling are similar to those deduced from axisymmetric analysis of experimental data with ELMs. We focus on the effect of applying $n=3$ and $n=6$ magnetic perturbations using the RMP coils. A midplane displacement of over $\pm 1$ cm is seen when the full current is applied. The current in the coils is scaned and a linear relationship between coil current and midplane displacement is found. The effect of this non-axisymmetric equilibrium on infinite $n$ ballooning stability is investigated using COBRA (R Sanchez et al 2000 J. Comput. Phys. 161 576-588).
△ Less
Submitted 11 December, 2013;
originally announced December 2013.
-
Tearing mode stability calculations with pressure flattening
Authors:
C J Ham,
J W Connor,
S C Cowley,
R J Hastie,
T C Hender,
Y Q Liu
Abstract:
Calculations of tearing mode stability in tokamaks split conveniently into an external region, where marginally stable ideal MHD is applicable, and a resonant layer around the rational surface where sophisticated kinetic physics is needed. These two regions are coupled by the stability parameter. Pressure and current perturbations localized around the rational surface alter the stability of tearin…
▽ More
Calculations of tearing mode stability in tokamaks split conveniently into an external region, where marginally stable ideal MHD is applicable, and a resonant layer around the rational surface where sophisticated kinetic physics is needed. These two regions are coupled by the stability parameter. Pressure and current perturbations localized around the rational surface alter the stability of tearing modes. Equations governing the changes in the external solution and - are derived for arbitrary perturbations in axisymmetric toroidal geometry. The relationship of - with and without pressure flattening is obtained analytically for four pressure flattening functions. Resistive MHD codes do not contain the appropriate layer physics and therefore cannot predict stability directly. They can, however, be used to calculate -. Existing methods (Ham et al. 2012 Plasma Phys. Control. Fusion 54 025009) for extracting - from resistive codes are unsatisfactory when there is a finite pressure gradient at the rational surface and favourable average curvature because of the Glasser stabilizing effect. To overcome this difficulty we introduce a specific pressure flattening function that allows the earlier approach to be used. The technique is first tested numerically in cylindrical geometry with an artificial favourable curvature. Its application to toroidal geometry is then demonstrated using the toroidal tokamak tearing mode stability code T7 (Fitzpatrick et al. 1993 Nucl. Fusion 33 1533) which uses an approximate analytic equilibrium. The prospects for applying this approach to resistive MHD codes such as MARS-F (Liu et al. 2000 Phys. Plasmas 7 3681) which utilize a fully toroidal equilibrium are discussed.
△ Less
Submitted 9 August, 2013;
originally announced August 2013.
-
Understanding the effect resonant magnetic perturbations have on ELMs
Authors:
A. Kirk,
I. T. Chapman,
T. E. Evans,
C. Ham,
J. R. Harrison,
G. Huijsmans,
Y. Liang,
Y. Q. Liu,
A. Loarte,
W. Suttrop,
A. J. Thornton
Abstract:
All current estimations of the energy released by type I ELMs indicate that, in order to ensure an adequate lifetime of the divertor targets on ITER, a mechanism is required to decrease the amount of energy released by an ELM, or to eliminate ELMs altogether. One such amelioration mechanism relies on perturbing the magnetic field in the edge plasma region, either leading to more frequent, smaller…
▽ More
All current estimations of the energy released by type I ELMs indicate that, in order to ensure an adequate lifetime of the divertor targets on ITER, a mechanism is required to decrease the amount of energy released by an ELM, or to eliminate ELMs altogether. One such amelioration mechanism relies on perturbing the magnetic field in the edge plasma region, either leading to more frequent, smaller ELMs (ELM mitigation) or ELM suppression. This technique of Resonant Magnetic Perturbations (RMPs) has been employed to suppress type I ELMs at high collisionality/density on DIII-D, ASDEX Upgrade, KSTAR and JET and at low collisionality on DIII-D. At ITER-like collisionality the RMPs enhance the transport of particles or energy and keep the edge pressure gradient below the 2D linear ideal MHD critical value that would trigger an ELM, whereas at high collisionality/density the type I ELMs are replaced by small type II ELMs. Although ELM suppression only occurs within limitied operational ranges, ELM mitigation is much more easily achieved. The exact parameters that determine the onset of ELM suppression are unknown but in all cases the magnetic perturbations produce 3D distortions to the plasma and enhanced particle transport. The incorporation of these 3D effects in codes will be essential in order to make quantitative predictions for future devices.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Understanding ELM mitigation by resonant magnetic perturbations on MAST
Authors:
A. Kirk,
I. T. Chapman,
Yueqiang Liu,
P. Cahyna,
P. Denner,
G. Fishpool,
C. J. Ham,
J. R. Harrison,
Yunfeng Liang,
E. Nardon,
S. Saarelma,
R. Scannell,
A. J. Thornton,
the MAST team
Abstract:
Sustained ELM mitigation has been achieved using RMPs with a toroidal mode number of n=4 and n=6 in lower single null and with n=3 in connected double null plasmas on MAST. The ELM frequency increases by up to a factor of eight with a similar reduction in ELM energy loss. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearly with current…
▽ More
Sustained ELM mitigation has been achieved using RMPs with a toroidal mode number of n=4 and n=6 in lower single null and with n=3 in connected double null plasmas on MAST. The ELM frequency increases by up to a factor of eight with a similar reduction in ELM energy loss. A threshold current for ELM mitigation is observed above which the ELM frequency increases approximately linearly with current in the coils. A comparison of the filament structures observed during the ELMs in the natural and mitigated stages shows that the mitigated ELMs have the characteristics of type I ELMs even though their frequency is higher, their energy loss is reduced and the pedestal pressure gradient is decreased. During the ELM mitigated stage clear lobe structures are observed in visible-light imaging of the X-point region. The size of these lobes is correlated with the increase in ELM frequency observed. The RMPs produce a clear 3D distortion to the plasma and it is likely that these distortions explain why ELMs are destabilised and hence why ELM mitigation occurs.
△ Less
Submitted 20 June, 2013;
originally announced June 2013.
-
Towards understanding edge localised mode mitigation by resonant magnetic perturbations in MAST
Authors:
I. T. Chapman,
A. Kirk,
C. J. Ham,
J. R. Harrison,
Y. Q. Liu,
S. Saarelma,
R. Scannell,
A. J. Thornton,
M. Becoulet,
F. Orain,
W. A. Cooper,
S. Pamela,
MAST Team
Abstract:
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a signifi…
▽ More
Type-I Edge Localised Modes (ELMs) have been mitigated in MAST through the application of n = 3, 4 and 6 resonant magnetic perturbations (RMPs). For each toroidal mode number of the non-axisymmetric applied fields, the frequency of the ELMs has been increased significantly, and the peak heat flux on the divertor plates reduced commensurately. This increase in ELM frequency occurs despite a significant drop in the edge pressure gradient, which would be expected to stabilise the peeling-ballooning modes thought to be responsible for type-I ELMs. Various mechanisms which could cause a destabilisation of the peeling-ballooning modes are presented, including pedestal widening, plasma rotation braking, three dimensional corrugation of the plasma boundary and the existence of radially extended lobe structures near to the X-point. This leads to a model aimed at resolving the apparent dichotomy of ELM control, that is to say ELM suppression occurring due to the pedestal pressure reduction below the peeling-ballooning stability boundary, whilst the reduction in pressure can also lead to ELM mitigation, which is ostensibly a destabilisation of peeling-ballooning modes. In the case of ELM mitigation, the pedestal broadening, 3d corrugation or lobes near the X-point degrade ballooning stability so much that the pedestal recovers rapidly to cross the new stability boundary at lower pressure more frequently, whilst in the case of suppression, the plasma parameters are such that the particle transport reduces the edge pressure below the stability boundary which is only mildly affected by negligible rotation braking, small edge corrugation or short, broad lobe structures.
△ Less
Submitted 16 May, 2013;
originally announced May 2013.
