Showing 1–8 of 8 results for author: Höppner, C

A Large Ungated TPC with GEM Amplification

Authors: M. Berger, M. Ball, L. Fabbietti, B. Ketzer, R. Arora, R. Beck, F. Böhmer, J. -C. Chen, F. Cusanno, S. Dørheim, J. Hehner, N. Herrmann, C. Höppner, D. Kaiser, M. Kis, V. Kleipa, I. Konorov, J. Kunkel, N. Kurz, Y. Leifels, P. Müllner, R. Münzer, S. Neubert, J. Rauch, C. J. Schmidt , et al. (6 additional authors not shown)

Abstract: A Time Projection Chamber (TPC) is an ideal device for the detection of charged particle tracks in a large volume covering a solid angle of almost $4π$. The high density of hits on a given particle track facilitates the task of pattern recognition in a high-occupancy environment and in addition provides particle identification by measuring the specific energy loss for each track. For these reasons… ▽ More A Time Projection Chamber (TPC) is an ideal device for the detection of charged particle tracks in a large volume covering a solid angle of almost $4π$. The high density of hits on a given particle track facilitates the task of pattern recognition in a high-occupancy environment and in addition provides particle identification by measuring the specific energy loss for each track. For these reasons, TPCs with Multiwire Proportional Chamber (MWPC) amplification have been and are widely used in experiments recording heavy-ion collisions. A significant drawback, however, is the large dead time of the order of 1 ms per event generated by the use of a gating grid, which is mandatory to prevent ions created in the amplification region from drifting back into the drift volume, where they would severely distort the drift path of subsequent tracks. For experiments with higher event rates this concept of a conventional TPC operating with a triggered gating grid can therefore not be applied without a significant loss of data. A continuous readout of the signals is the more appropriate way of operation. This, however, constitutes a change of paradigm with considerable challenges to be met concerning the amplification region, the design and bandwidth of the readout electronics, and the data handling. A mandatory prerequisite for such an operation is a sufficiently good suppression of the ion backflow from the avalanche region, which otherwise limits the tracking and particle identification capabilities of such a detector. Gas Electron Multipliers (GEM) are a promising candidate to combine excellent spatial resolution with an intrinsic suppression of ions. In this paper we describe the design, construction and the commissioning of a large TPC with GEM amplification and without gating grid (GEM-TPC). △ Less

Submitted 16 February, 2017; originally announced February 2017.

Comments: 73 pages, 55 figures

The COMPASS Setup for Physics with Hadron Beams

Authors: Ph. Abbon, C. Adolph, R. Akhunzyanov, Yu. Alexandrov, M. G. Alexeev, G. D. Alexeev, A. Amoroso, V. Andrieux, V. Anosov, A. Austregesilo, B. Badelek, F. Balestra, J. Barth, G. Baum, R. Beck, Y. Bedfer, A. Berlin, J. Bernhard, K. Bicker, E. R. Bielert, J. Bieling, R. Birsa, J. Bisplinghoff, M. Bodlak, M. Boer , et al. (207 additional authors not shown)

Abstract: The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well… ▽ More The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with several charged and/or neutral particles in the final state. Making use of a large part of the apparatus that was previously built for spin structure studies with a muon beam, it also features a new target system as well as new or upgraded detectors. The hadron setup is able to operate at the high incident hadron flux available at CERN. It is characterised by large angular and momentum coverages, large and nearly flat acceptances, and good two and three-particle mass resolutions. In 2008 and 2009 it was successfully used with positive and negative hadron beams and with liquid hydrogen and solid nuclear targets. This article describes the new and upgraded detectors and auxiliary equipment, outlines the reconstruction procedures used, and summarises the general performance of the setup. △ Less

Submitted 7 October, 2014; originally announced October 2014.

Comments: 91 pages, 101 figures and 7 tables

Space-Charge Effects in an Ungated GEM-based TPC

Authors: F. V. Böhmer, M. Ball, S. Dørheim, C. Höppner, B. Ketzer, I. Konorov, S. Neubert, S. Paul, J. Rauch, M. Vandenbroucke

Abstract: A fundamental limit to the application of Time Projection Chambers (TPCs) in high-rate experiments is the accumulation of slowly drifting ions in the active gas volume, which compromises the homogeneity of the drift field and hence the detector resolution. Conventionally, this problem is overcome by the use of ion-gating structures. This method, however, introduces large dead times and restricts t… ▽ More A fundamental limit to the application of Time Projection Chambers (TPCs) in high-rate experiments is the accumulation of slowly drifting ions in the active gas volume, which compromises the homogeneity of the drift field and hence the detector resolution. Conventionally, this problem is overcome by the use of ion-gating structures. This method, however, introduces large dead times and restricts trigger rates to a few hundred per second. The ion gate can be eliminated from the setup by the use of Gas Electron Multiplier (GEM) foils for gas amplification, which intrinsically suppress the backflow of ions. This makes the continuous operation of a TPC at high rates feasible. In this work, Monte Carlo simulations of the buildup of ion space charge in a GEM-based TPC and the correction of the resulting drift distortions are discussed, based on realistic numbers for the ion backflow in a triple-GEM amplification stack. A TPC in the future PANDA experiment at FAIR, in which antiproton-proton interaction rates up to 2 x 10^7 per second will be reached, serves as an example for the experimental environment. The simulations show that space charge densities up to 65 fC per cubic cm are reached, leading to electron drift distortions of up to 10 mm. The application of a laser calibration system to correct these distortions is investigated. Based on full simulations of the detector physics and response, we show that it is possible to correct for the drift distortions and to maintain the good momentum resolution of the GEM-TPC. △ Less

Submitted 3 September, 2012; originally announced September 2012.

Comments: Preprint submitted to Nuclear Instruments and Methods A

Technical Design Study for the PANDA Time Projection Chamber

Authors: M. Ball, F. V. Böhmer, S. Dørheim, C. Höppner, B. Ketzer, I. Konorov, S. Neubert, S. Paul, J. Rauch, S. Uhl, M. Vandenbroucke, M. Berger, J. -C. Berger-Chen, F. Cusanno, L. Fabbietti, R. Münzer, R. Arora, J. Frühauf, M. Kiš, Y. Leifels, V. Kleipa, J. Hehner, J. Kunkel, N. Kurz, K. Peters , et al. (16 additional authors not shown)

Abstract: This document illustrates the technical layout and the expected performance of a Time Projection Chamber as the central tracking system of the PANDA experiment. The detector is based on a continuously operating TPC with Gas Electron Multiplier (GEM) amplification. This document illustrates the technical layout and the expected performance of a Time Projection Chamber as the central tracking system of the PANDA experiment. The detector is based on a continuously operating TPC with Gas Electron Multiplier (GEM) amplification. △ Less

Submitted 29 June, 2012; originally announced July 2012.

Comments: Editors: B. Ketzer, L. Fabbietti (TU München) 84 pages, 122 figures

A Novel Generic Framework for Track Fitting in Complex Detector Systems

Authors: C. Höppner, S. Neubert, B. Ketzer, S. Paul

Abstract: This paper presents a novel framework for track fitting which is usable in a wide range of experiments, independent of the specific event topology, detector setup, or magnetic field arrangement. This goal is achieved through a completely modular design. Fitting algorithms are implemented as interchangeable modules. At present, the framework contains a validated Kalman filter. Track parameterizat… ▽ More This paper presents a novel framework for track fitting which is usable in a wide range of experiments, independent of the specific event topology, detector setup, or magnetic field arrangement. This goal is achieved through a completely modular design. Fitting algorithms are implemented as interchangeable modules. At present, the framework contains a validated Kalman filter. Track parameterizations and the routines required to extrapolate the track parameters and their covariance matrices through the experiment are also implemented as interchangeable modules. Different track parameterizations and extrapolation routines can be used simultaneously for fitting of the same physical track. Representations of detector hits are the third modular ingredient to the framework. The hit dimensionality and orientation of planar tracking detectors are not restricted. Tracking information from detectors which do not measure the passage of particles in a fixed physical detector plane, e.g. drift chambers or TPCs, is used without any simplifications. The concept is implemented in a light-weight C++ library called GENFIT, which is available as free software. △ Less

Submitted 23 March, 2010; v1 submitted 5 November, 2009; originally announced November 2009.

Journal ref: Nucl.Instrum.Meth.A620:518-525,2010

Development of a GEM-TPC prototype

Authors: Heinz Angerer, Reinhard Beck, Martin Berger, Felix Boehmer, K. -T. Brinkmann, Paul Buehler, Michael Carnegie, Sverre Dorheim, Laura Fabbietti, Chr. Funke, F. Cusanno, Joerg Hehner, Andreas Heinz, Markus Henske, Christian Hoeppner, David Kaiser, Bernhard Ketzer, Igor Konorov, Jochen Kunkel, Michael Lang, Johann Marton, Sebastian Neubert, Stephan Paul, Alexander Schmah, Christian Schmidt , et al. (15 additional authors not shown)

Abstract: The use of GEM foils for the amplification stage of a TPC instead of a con- ventional MWPC allows one to bypass the necessity of gating, as the backdrift is suppressed thanks to the asymmetric field configuration. This way, a novel continuously running TPC, which represents one option for the PANDA central tracker, can be realized. A medium sized prototype with a diameter of 300 mm and a length… ▽ More The use of GEM foils for the amplification stage of a TPC instead of a con- ventional MWPC allows one to bypass the necessity of gating, as the backdrift is suppressed thanks to the asymmetric field configuration. This way, a novel continuously running TPC, which represents one option for the PANDA central tracker, can be realized. A medium sized prototype with a diameter of 300 mm and a length of 600 mm will be tested inside the FOPI spectrometer at GSI using a carbon or lithium beam at intermediate energies (E = 1-3AGeV). This detector test under realistic experimental conditions should allow us to verify the spatial resolution for single tracks and the reconstruction capability for displaced vertexes. A series of physics measurement implying pion beams is scheduled with the FOPI spectrometer together with the GEM-TPC as well. △ Less

Submitted 4 November, 2009; originally announced November 2009.

Comments: 5 pages, 4 figures, Proceedings for 11th ICATTP conference in como (italy)

Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets

Authors: The PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, O. Wang, H. Xu, J. Becker, F. Feldbauer, F. -H. Heinsius, T. Held, H. Koch, B. Kopf, M. Pelizaeus, T. Schroeder, M. Steinke, U. Wiedner, J. Zhong, A. Bianconi, M. Bragadireanu, D. Pantea , et al. (387 additional authors not shown)

Abstract: This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process. This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process. △ Less

Submitted 1 July, 2009; originally announced July 2009.

Comments: 10 pages, 14MB, accepted by FAIR STI in May 2009, editors: Inti Lehmann (chair), Andrea Bersani, Yuri Lobanov, Jost Luehning, Jerzy Smyrski, Technical Coordiantor: Lars Schmitt, Bernd Lewandowski (deputy), Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy)

Technical Design Report for PANDA Electromagnetic Calorimeter (EMC)

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, O. Wang, H. Xu, J. Becker, F. Feldbauer, F. -H. Heinsius, T. Held, H. Koch, B. Kopf, M. Pelizaeus, T. Schroeder, M. Steinke, U. Wiedner, J. Zhong, A. Bianconi, M. Bragadireanu, D. Pantea , et al. (387 additional authors not shown)

Abstract: This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and… ▽ More This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and radiation hardness studies. The document shows that the EMC is ready for construction up to the front-end electronics interface. △ Less

Submitted 7 October, 2008; originally announced October 2008.

Comments: 199 pages, submitted to FAIR STI on July 1st 2008, Editors: Fritz-Herbert Heinsius, Bertram Kopf, Bernd Lewandowski (Deputy Technical Coordinator), Herbert Löhner, Rainer Novotny (Project Coordinator), Klaus Peters, Philippe Rosier, Lars Schmitt (Technical Coordinator), Alexander Vasiliev; Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy)