-
Description of collective magnetization processes with machine learning models
Authors:
Alexander Kornell,
Lukas Exl,
Leoni Breth,
Johann Fischbacher,
Alexander Kovacs,
Harald Oezelt,
Markus Gusenbauer,
Masao Yano,
Noritsugu Sakuma,
Akihito Kinoshita,
Tetsuya Shoji,
Akira Kato,
Norbert J. Mauser,
Thomas Schrefl
Abstract:
This work introduces a latent space method to calculate the demagnetization reversal process of multigrain permanent magnets. The algorithm consists of two deep learning models based on neural networks. The embedded Stoner-Wohlfarth method is used as a reduced order model for computing samples to train and test the machine learning approach. The work is a proof of concept of the method since the u…
▽ More
This work introduces a latent space method to calculate the demagnetization reversal process of multigrain permanent magnets. The algorithm consists of two deep learning models based on neural networks. The embedded Stoner-Wohlfarth method is used as a reduced order model for computing samples to train and test the machine learning approach. The work is a proof of concept of the method since the used microstructures are simple and the only varying parameters are the magnetic anisotropy axes of the hard magnetic grains. A convolutional autoencoder is used for nonlinear dimensionality reduction, in order to reduce the required amount of training samples for predicting the hysteresis loops. We enriched the loss function with physical information about the underlying problem which increases the accuracy of the machine learning approach. A deep learning regressor is operating in the latent space of the autoencoder. The predictor takes a series of previously encoded magnetization states and outputs the next magnetization state along the hysteresis curve. To predict the complete demagnetization loop, we apply a recursive learning scheme.
△ Less
Submitted 7 May, 2022;
originally announced May 2022.
-
Exploring the hysteresis properties of nanocrystalline permanent magnets using deep learning
Authors:
Alexander Kovacs,
Lukas Exl,
Alexander Kornell,
Johann Fischbacher,
Markus Hovorka,
Markus Gusenbauer,
Leoni Breth,
Harald Oezelt,
Masao Yano,
Noritsugu Sakuma,
Akihito Kinoshita,
Tetsuya Shoji,
Akira Kato,
Thomas Schrefl
Abstract:
We demonstrate the use of model order reduction and neural networks for estimating the hysteresis properties of nanocrystalline permanent magnets from microstructure. With a data-driven approach, we learn the demagnetization curve from data-sets created by grain growth and micromagnetic simulations. We show that the granular structure of a magnet can be encoded within a low-dimensional latent spac…
▽ More
We demonstrate the use of model order reduction and neural networks for estimating the hysteresis properties of nanocrystalline permanent magnets from microstructure. With a data-driven approach, we learn the demagnetization curve from data-sets created by grain growth and micromagnetic simulations. We show that the granular structure of a magnet can be encoded within a low-dimensional latent space. Latent codes are constructed using a variational autoencoder. The map** of structure code to hysteresis properties is a multi-target regression problem. We apply deep neural network and use parameter sharing, in order to predict anchor points along the demagnetization curves from the magnet's structure code. The method is applied to study the magnetic properties of nanocrystalline permanent magnets. We show how new grain structures can be generated by interpolation between two points in the latent space and how the magnetic properties of the resulting magnets can be predicted.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Full-Spin-Wave-Scaled Finite Element Stochastic Micromagnetism: Mesh-Independent FUSSS LLG Simulations of Ferromagnetic Resonance and Reversal
Authors:
Harald Oezelt,
Luman Qu,
Alexander Kovacs,
Johann Fischbacher,
Markus Gusenbauer,
Roman Beigelbeck,
Dirk Praetorius,
Masao Yano,
Tetsuya Shoji,
Akira Kato,
Roy Chantrell,
Michael Winklhofer,
Gergely Zimanyi,
Thomas Schrefl
Abstract:
In this paper, we address the problem that standard stochastic Landau-Lifshitz-Gilbert (sLLG) simulations typically produce results that show unphysical mesh-size dependence. The root cause of this problem is that the effects of spin wave fluctuations are ignored in sLLG. We propose to represent the effect of these fluctuations by a "FUll-Spinwave-Scaled Stochastic LLG", or FUSSS LLG method. In FU…
▽ More
In this paper, we address the problem that standard stochastic Landau-Lifshitz-Gilbert (sLLG) simulations typically produce results that show unphysical mesh-size dependence. The root cause of this problem is that the effects of spin wave fluctuations are ignored in sLLG. We propose to represent the effect of these fluctuations by a "FUll-Spinwave-Scaled Stochastic LLG", or FUSSS LLG method. In FUSSS LLG, the intrinsic parameters of the sLLG simulations are first scaled by scaling factors that integrate out the spin wave fluctuations up to the mesh size, and the sLLG simulation is then performed with these scaled parameters. We developed FUSSS LLG by studying the Ferromagnetic Resonance (FMR) in Nd$_2$Fe$_{14}$B cubes. The nominal scaling greatly reduced the mesh size dependence relative to sLLG. We further discovered that adjusting one scaling exponent by less than 10% delivered fully mesh-size-independent results for the FMR peak. We then performed three tests and validations of our FUSSS LLG with this modified scaling. 1) We studied the same FMR but with magnetostatic fields included. 2) We simulated the total magnetization of the Nd$_2$Fe$_{14}$B cube. 3) We studied the effective, temperature- and swee** rate-dependent coercive field of the cubes. In all three cases we found that FUSSS LLG delivered essentially mesh-size-independent results, which tracked the theoretical expectations better than unscaled sLLG. Motivated by these successful validations, we propose that FUSSS LLG provides marked, qualitative progress towards accurate, high precision modeling of micromagnetics in hard, permanent magnets.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Extracting local switching fields in permanent magnets using machine learning
Authors:
Markus Gusenbauer,
Harald Oezelt,
Johann Fischbacher,
Alexander Kovacs,
Panpan Zhao,
Thomas George Woodcock,
Thomas Schrefl
Abstract:
Microstructural features play an important role for the quality of permanent magnets. The coercivity is greatly influenced by crystallographic defects, which is well known for MnAl-C, for example. In this work we show a direct link of microstructural features to the local coercivity of MnAl-C grains by machine learning. A large number of micromagnetic simulations is performed directly from Electro…
▽ More
Microstructural features play an important role for the quality of permanent magnets. The coercivity is greatly influenced by crystallographic defects, which is well known for MnAl-C, for example. In this work we show a direct link of microstructural features to the local coercivity of MnAl-C grains by machine learning. A large number of micromagnetic simulations is performed directly from Electron Backscatter Diffraction (EBSD) data using an automated meshing, modeling and simulation procedure. Decision trees are trained with the simulation results and predict local switching fields from new microscopic data within seconds.
△ Less
Submitted 18 December, 2019; v1 submitted 21 October, 2019;
originally announced October 2019.
-
Learning magnetization dynamics
Authors:
Alexander Kovacs,
Johann Fischbacher,
Harald Oezelt,
Markus Gusenbauer,
Lukas Exl,
Florian Bruckner,
Dieter Suess,
Thomas Schrefl
Abstract:
Deep neural networks are used to model the magnetization dynamics in magnetic thin film elements. The magnetic states of a thin film element can be represented in a low dimensional space. With convolutional autoencoders a compression ratio of 1024:1 was achieved. Time integration can be performed in the latent space with a second network which was trained by solutions of the Landau-Lifshitz-Gilber…
▽ More
Deep neural networks are used to model the magnetization dynamics in magnetic thin film elements. The magnetic states of a thin film element can be represented in a low dimensional space. With convolutional autoencoders a compression ratio of 1024:1 was achieved. Time integration can be performed in the latent space with a second network which was trained by solutions of the Landau-Lifshitz-Gilbert equation. Thus the magnetic response to an external field can be computed quickly.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Magnetic microstructure machine learning analysis
Authors:
Lukas Exl,
Johann Fischbacher,
Alexander Kovacs,
Harald Oezelt,
Markus Gusenbauer,
Kazuya Yokota,
Tetsuya Shoji,
Gino Hrkac,
Thomas Schrefl
Abstract:
We use a machine learning approach to identify the importance of microstructure characteristics in causing magnetization reversal in ideally structured large-grained Nd$_2$Fe$_{14}$B permanent magnets. The embedded Stoner-Wohlfarth method is used as a reduced order model for determining local switching field maps which guide the data-driven learning procedure. The predictor model is a random fores…
▽ More
We use a machine learning approach to identify the importance of microstructure characteristics in causing magnetization reversal in ideally structured large-grained Nd$_2$Fe$_{14}$B permanent magnets. The embedded Stoner-Wohlfarth method is used as a reduced order model for determining local switching field maps which guide the data-driven learning procedure. The predictor model is a random forest classifier which we validate by comparing with full micromagnetic simulations in the case of small granular test structures. In the course of the machine learning microstructure analysis the most important features explaining magnetization reversal were found to be the misorientation and the position of the grain within the magnet. The lowest switching fields occur near the top and bottom edges of the magnet. While the dependence of the local switching field on the grain orientation is known from theory, the influence of the position of the grain on the local coercive field strength is less obvious. As a direct result of our findings of the machine learning analysis we show that edge hardening via Dy-diffusion leads to higher coercive fields.
△ Less
Submitted 11 August, 2018;
originally announced August 2018.
-
Preconditioned nonlinear conjugate gradient method for micromagnetic energy minimization
Authors:
Lukas Exl,
Johann Fischbacher,
Alexander Kovacs,
Harald Oezelt,
Markus Gusenbauer,
Thomas Schrefl
Abstract:
Fast computation of demagnetization curves is essential for the computational design of soft magnetic sensors or permanent magnet materials. We show that a sparse preconditioner for a nonlinear conjugate gradient energy minimizer can lead to a speed up by a factor of 3 and 7 for computing hysteresis in soft magnetic and hard magnetic materials, respectively. As a preconditioner an approximation of…
▽ More
Fast computation of demagnetization curves is essential for the computational design of soft magnetic sensors or permanent magnet materials. We show that a sparse preconditioner for a nonlinear conjugate gradient energy minimizer can lead to a speed up by a factor of 3 and 7 for computing hysteresis in soft magnetic and hard magnetic materials, respectively. As a preconditioner an approximation of the Hessian of the Lagrangian is used, which only takes local field terms into account. Preconditioning requires a few additional sparse matrix vector multiplications per iteration of the nonlinear conjugate gradient method, which is used for minimizing the energy for a given external field. The time to solution for computing the demagnetization curve scales almost linearly with problem size.
△ Less
Submitted 11 January, 2018;
originally announced January 2018.
-
Numerical optimization of writer geometries for bit patterned magnetic recording
Authors:
A. Kovacs,
H. Oezelt,
S. Bance,
J. Fischbacher,
M. Gusenbauer,
F. Reichel,
L. Exl,
T. Schrefl,
M. E. Schabes
Abstract:
A fully-automated pole-tip shape optimization tool, involving write head geometry construction, meshing, micromagnetic simulation and evaluation, is presented. Optimizations have been performed for three different writing schemes (centered, staggered and shingled) for an underlying bit patterned media with an areal density of 2.12 Tdots/in$^2$ . Optimizations were performed for a single-phase medi…
▽ More
A fully-automated pole-tip shape optimization tool, involving write head geometry construction, meshing, micromagnetic simulation and evaluation, is presented. Optimizations have been performed for three different writing schemes (centered, staggered and shingled) for an underlying bit patterned media with an areal density of 2.12 Tdots/in$^2$ . Optimizations were performed for a single-phase media with 10 nm thickness and a mag spacing of 8 nm. From the computed write field and its gradient and the minimum energy barrier during writing for islands on the adjacent track, the overall write error rate is computed. The overall write errors are 0.7, 0.08, and 2.8 x 10$^{-5}$ for centered writing, staggered writing, and shingled writing.
△ Less
Submitted 14 April, 2015;
originally announced April 2015.
-
An ESPResSo implementation of elastic objects immersed in a fluid
Authors:
Ivan Cimrak,
Markus Gusenbauer,
Iveta Jancigova
Abstract:
We review the lattice-Boltzmann (LB) method coupled with the immersed boundary (IB) method for the description of combined flow of particulate suspensions with immersed elastic objects. We describe the implementation of the combined LB-IB method into the open-source package ESPResSo. We present easy-to-use structures used to model a closed object in a simulation package, the definition of its elas…
▽ More
We review the lattice-Boltzmann (LB) method coupled with the immersed boundary (IB) method for the description of combined flow of particulate suspensions with immersed elastic objects. We describe the implementation of the combined LB-IB method into the open-source package ESPResSo. We present easy-to-use structures used to model a closed object in a simulation package, the definition of its elastic properties, and the interaction between the fluid and the immersed object. We also present the test cases with short examples of the code explaining the functionality of the new package.
△ Less
Submitted 12 December, 2013;
originally announced December 2013.
-
Guided self-assembly of magnetic beads for biomedical applications
Authors:
Markus Gusenbauer,
Ha Nguyen,
Franz Reichel,
Lukas Exl,
Simon Bance,
Johann Fischbacher,
Harald Özelt,
Alexander Kovacs,
Martin Brandl,
Thomas Schrefl
Abstract:
Micromagnetic beads are widely used in biomedical applications for cell separation, drug delivery, and hypothermia cancer treatment. Here we propose to use self-organized magnetic bead structures which accumulate on fixed magnetic seeding points to isolate circulating tumor cells. The analysis of circulating tumor cells is an emerging tool for cancer biology research and clinical cancer management…
▽ More
Micromagnetic beads are widely used in biomedical applications for cell separation, drug delivery, and hypothermia cancer treatment. Here we propose to use self-organized magnetic bead structures which accumulate on fixed magnetic seeding points to isolate circulating tumor cells. The analysis of circulating tumor cells is an emerging tool for cancer biology research and clinical cancer management including the detection, diagnosis and monitoring of cancer. Microfluidic chips for isolating circulating tumor cells use either affinity, size or density capturing methods. We combine multiphysics simulation techniques to understand the microscopic behavior of magnetic beads interacting with Nickel accumulation points used in lab-on-chip technologies. Our proposed chip technology offers the possibility to combine affinity and size capturing with special antibody-coated bead arrangements using a magnetic gradient field created by Neodymium Iron Boron permanent magnets. The multiscale simulation environment combines magnetic field computation, fluid dynamics and discrete particle dynamics.
△ Less
Submitted 30 May, 2013;
originally announced May 2013.
-
Simulation of magnetic active polymers for versatile microfluidic devices
Authors:
Markus Gusenbauer,
Harald Özelt,
Johann Fischbacher,
Franz Reichel,
Lukas Exl,
Simon Bance,
Nadezhda Kataeva,
Claudia Binder,
Hubert Brückl,
Thomas Schrefl
Abstract:
We propose to use a compound of magnetic nanoparticles (20-100 nm) embedded in a flexible polymer (Polydimethylsiloxane PDMS) to filter circulating tumor cells (CTCs). The analysis of CTCs is an emerging tool for cancer biology research and clinical cancer management including the detection, diagnosis and monitoring of cancer. The combination of experiments and simulations lead to a versatile micr…
▽ More
We propose to use a compound of magnetic nanoparticles (20-100 nm) embedded in a flexible polymer (Polydimethylsiloxane PDMS) to filter circulating tumor cells (CTCs). The analysis of CTCs is an emerging tool for cancer biology research and clinical cancer management including the detection, diagnosis and monitoring of cancer. The combination of experiments and simulations lead to a versatile microfluidic lab-on-chip device. Simulations are essential to understand the influence of the embedded nanoparticles in the elastic PDMS when applying a magnetic gradient field. It combines finite element calculations of the polymer, magnetic simulations of the embedded nanoparticles and the fluid dynamic calculations of blood plasma and blood cells. With the use of magnetic active polymers a wide range of tunable microfluidic structures can be created. The method can help to increase the yield of needed isolated CTCs.
△ Less
Submitted 30 May, 2013;
originally announced May 2013.
-
A tunable cancer cell filter using magnetic beads: cellular and fluid dynamic simulations
Authors:
Markus Gusenbauer,
Ivan Cimrak,
Simon Bance,
Lukas Exl,
Franz Reichel,
Harald Oezelt,
Thomas Schrefl
Abstract:
In the field of biomedicine magnetic beads are used for drug delivery and to treat hyperthermia. Here we propose to use self-organized bead structures to isolate circulating tumor cells using lab-on-chip technologies. Typically blood flows past microposts functionalized with antibodies for circulating tumor cells. Creating these microposts with interacting magnetic beads makes it possible to tune…
▽ More
In the field of biomedicine magnetic beads are used for drug delivery and to treat hyperthermia. Here we propose to use self-organized bead structures to isolate circulating tumor cells using lab-on-chip technologies. Typically blood flows past microposts functionalized with antibodies for circulating tumor cells. Creating these microposts with interacting magnetic beads makes it possible to tune the geometry in size, position and shape. We develop a simulation tool that combines micromagnetics, discrete particle dynamics and fluid dynamics, in order to design micropost arrays made of interacting beads. For the simulation of blood flow we use the Lattice-Boltzmann method with immersed elastic blood cell models. Parallelization distributes large fluid and particle dynamic simulations over available resources to reduce overall calculation time.
△ Less
Submitted 5 October, 2011;
originally announced October 2011.
-
Self-organizing magnetic beads for biomedical applications
Authors:
Markus Gusenbauer,
Alexander Kovacs,
Franz Reichel,
Lukas Exl,
Simon Bance,
Harald Ozelt,
Thomas Schrefl
Abstract:
In the field of biomedicine magnetic beads are used for drug delivery and to treat hyperthermia. Here we propose to use self-organized bead structures to isolate circulating tumor cells using lab-on-chip technologies. Typically blood flows past microposts functionalized with antibodies for circulating tumor cells. Creating these microposts with interacting magnetic beads makes it possible to tune…
▽ More
In the field of biomedicine magnetic beads are used for drug delivery and to treat hyperthermia. Here we propose to use self-organized bead structures to isolate circulating tumor cells using lab-on-chip technologies. Typically blood flows past microposts functionalized with antibodies for circulating tumor cells. Creating these microposts with interacting magnetic beads makes it possible to tune the geometry in size, position and shape. We developed a simulation tool that combines micromagnetics and discrete particle dynamics, in order to design micropost arrays made of interacting beads. The simulation takes into account the viscous drag of the blood flow, magnetostatic interactions between the magnetic beads and gradient forces from external aligned magnets. We developed a particle-particle particle-mesh method for effective computation of the magnetic force and torque acting on the particles.
△ Less
Submitted 5 October, 2011;
originally announced October 2011.
-
Fast stray field computation on tensor grids
Authors:
Lukas Exl,
Winfried Auzinger,
Simon Bance,
Markus Gusenbauer,
Franz Reichel,
Thomas Schrefl
Abstract:
A direct integration algorithm is described to compute the magnetostatic field and energy for given magnetization distributions on not necessarily uniform tensor grids. We use an analytically-based tensor approximation approach for function-related tensors, which reduces calculations to multilinear algebra operations. The algorithm scales with N^(4/3) for N computational cells used and with N^(2/3…
▽ More
A direct integration algorithm is described to compute the magnetostatic field and energy for given magnetization distributions on not necessarily uniform tensor grids. We use an analytically-based tensor approximation approach for function-related tensors, which reduces calculations to multilinear algebra operations. The algorithm scales with N^(4/3) for N computational cells used and with N^(2/3) (sublinear) when magnetization is given in canonical tensor format. In the final section we confirm our theoretical results concerning computing times and accuracy by means of numerical examples.
△ Less
Submitted 30 September, 2011; v1 submitted 27 September, 2011;
originally announced September 2011.
