Showing 1–6 of 6 results for author: Gulmini, M

AGATA DAQ-box: a unified data acquisition system for different experimental conditions

Authors: Amel Korichi, Emmanuel Clément, Nicolas Dosme, Eric Legay, Olivier Stézowski, Alain Goasduff, Yann Aubert, Jéremie Dudouet, Souhir Elloumi, Phillipe Gauron, Xavier Grave, Michele Gulmini, Jéremie Jacob, Vincent Lafage, Patrick Le Jeannic, Guillaume Lalaire, Joa Ljungvall, Clothilde Maugeais, Caterina Michelagnoli, Roméo Molini, Guillaume Philippon, Stephane Pietri, Damian Ralet, Marco Roetta, Frederic Saillant , et al. (2 additional authors not shown)

Abstract: The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and contro… ▽ More The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and control of the germanium detectors of AGATA. Our system is highly versatile, capable of instrumenting AGATA and seamlessly adapting it to various configurations with a wide range of ancillary detectors and/or spectrometers. It consists of three main components: an autonomous and independent infrastructure, a dedicated application core ensuring overall consistency, and a high--performance software package providing a fully integrated data flow management including the setting-up, the supervision and the slow control of the instrument. In this paper, we present a comprehensive analysis of the system's design and performance, particularly under high-counting rate conditions. △ Less

Submitted 21 July, 2023; v1 submitted 29 May, 2023; originally announced May 2023.

The Analytical Method algorithm for trigger primitives generation at the LHC Drift Tubes detector

Authors: G. Abbiendi, J. Alcaraz Maestre, A. Álvarez Fernández, B. Álvarez González, N. Amapane, I. Bachiller, L. Barcellan, C. Baldanza, C. Battilana, M. Bellato, G. Bencze, M. Benettoni, N. Beni, A. Benvenuti, A. Bergnoli, L. C. Blanco Ramos, L. Borgonovi, A. Bragagnolo, V. Cafaro, A. Calderon, E. Calvo, R. Carlin, C. A. Carrillo Montoya, F. R. Cavallo, J. M. Cela Ruiz , et al. (121 additional authors not shown)

Abstract: The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the s… ▽ More The Compact Muon Solenoid (CMS) experiment prepares its Phase-2 upgrade for the high-luminosity era of the LHC operation (HL-LHC). Due to the increase of occupancy, trigger latency and rates, the full electronics of the CMS Drift Tube (DT) chambers will need to be replaced. In the new design, the time bin for the digitisation of the chamber signals will be of around 1~ns, and the totality of the signals will be forwarded asynchronously to the service cavern at full resolution. The new backend system will be in charge of building the trigger primitives of each chamber. These trigger primitives contain the information at chamber level about the muon candidates position, direction, and collision time, and are used as input in the L1 CMS trigger. The added functionalities will improve the robustness of the system against ageing. An algorithm based on analytical solutions for reconstructing the DT trigger primitives, called Analytical Method, has been implemented both as a software C++ emulator and in firmware. Its performance has been estimated using the software emulator with simulated and real data samples, and through hardware implementation tests. Measured efficiencies are 96 to 98\% for all qualities and time and spatial resolutions are close to the ultimate performance of the DT chambers. A prototype chain of the HL-LHC electronics using the Analytical Method for trigger primitive generation has been installed during Long Shutdown 2 of the LHC and operated in CMS cosmic data taking campaigns in 2020 and 2021. Results from this validation step, the so-called Slice Test, are presented. △ Less

Submitted 3 February, 2023; originally announced February 2023.

Comments: 16 pages, 11 figures

Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC

Authors: G. Abbiendi, J. Alcaraz Maestre, A. Álvarez Fernández, B. Álvarez González, N. Amapane, I. Bachiller, J. M. Barcala, L. Barcellan, C. Battilana, M. Bellato, G. Bencze, M. Benettoni, N. Beni, A. Benvenuti, L. C. Blanco Ramos, A. Boletti, A. Bragagnolo, J. A. Brochero Cifuentes, V. Cafaro, A. Calderon, E. Calvo, A. Cappati, R. Carlin, C. A. Carrillo Montoya, F. R. Cavallo , et al. (118 additional authors not shown)

Abstract: The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irrad… ▽ More The CMS drift tubes (DT) muon detector, built for withstanding the LHC expected integrated and instantaneous luminosities, will be used also in the High Luminosity LHC (HL-LHC) at a 5 times larger instantaneous luminosity and, consequently, much higher levels of radiation, reaching about 10 times the LHC integrated luminosity. Initial irradiation tests of a spare DT chamber at the CERN gamma irradiation facility (GIF++), at large ($\sim$O(100)) acceleration factor, showed ageing effects resulting in a degradation of the DT cell performance. However, full CMS simulations have shown almost no impact in the muon reconstruction efficiency over the full barrel acceptance and for the full integrated luminosity. A second spare DT chamber was moved inside the GIF++ bunker in October 2017. The chamber was being irradiated at lower acceleration factors, and only 2 out of the 12 layers of the chamber were switched at working voltage when the radioactive source was active, being the other layers in standby. In this way the other non-aged layers are used as reference and as a precise and unbiased telescope of muon tracks for the efficiency computation of the aged layers of the chamber, when set at working voltage for measurements. An integrated dose equivalent to two times the expected integrated luminosity of the HL-LHC run has been absorbed by this second spare DT chamber and the final impact on the muon reconstruction efficiency is under study. Direct inspection of some extracted aged anode wires presented a melted resistive deposition of materials. Investigation on the outgassing of cell materials and of the gas components used at the GIF++ are underway. Strategies to mitigate the ageing effects are also being developed. From the long irradiation measurements of the second spare DT chamber, the effects of radiation in the performance of the DTs expected during the HL-LHC run will be presented. △ Less

Submitted 12 December, 2019; originally announced December 2019.

Comments: 10 pages, 7 figures, to be published in JINST, editor I. González Caballero

Report number: CMS CR-2019/159

Journal ref: JINST 14 C12010 (2019)

Performance of the Fully Digital FPGA-based Front-End Electronics for the GALILEO Array

Authors: D. Barrientos, M. Bellato, D. Bazzacco, D. Bortolato, P. Cocconi, A. Gadea, V. González, M. Gulmini, R. Isocrate, D. Mengoni, A. Pullia, F. Recchia, D. Rosso, E. Sanchis, N. Toniolo, C. A. Ur, J. J. Valiente-Dobón

Abstract: In this work we present the architecture and results of a fully digital Front End Electronics (FEE) read out system developed for the GALILEO array. The FEE system, developed in collaboration with the Advanced Gamma Tracking Array (AGATA) collaboration, is composed of three main blocks: preamplifiers, digitizers and preprocessing electronics. The slow control system contains a custom Linux driver,… ▽ More In this work we present the architecture and results of a fully digital Front End Electronics (FEE) read out system developed for the GALILEO array. The FEE system, developed in collaboration with the Advanced Gamma Tracking Array (AGATA) collaboration, is composed of three main blocks: preamplifiers, digitizers and preprocessing electronics. The slow control system contains a custom Linux driver, a dynamic library and a server implementing network services. The digital processing of the data from the GALILEO germanium detectors has demonstrated the capability to achieve an energy resolution of 1.53 per mil at an energy of 1.33 MeV. △ Less

Submitted 16 June, 2014; originally announced June 2014.

Comments: 5 pages, 6 figures, preprint version of IEEE Transactions on Nuclear Science paper submitted for the 19th IEEE Real Time Conference

AGATA - Advanced Gamma Tracking Array

Authors: S. Akkoyun, A. Algora, B. Alikhani, F. Ameil, G. de Angelis, L. Arnold, A. Astier, A. Ataç, Y. Aubert, C. Aufranc, A. Austin, S. Aydin, F. Azaiez, S. Badoer, D. L. Balabanski, D. Barrientos, G. Baulieu, R. Baumann, D. Bazzacco, F. A. Beck, T. Beck, P. Bednarczyk, M. Bellato, M. A. Bentley, G. Benzoni , et al. (329 additional authors not shown)

Abstract: The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the… ▽ More The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. △ Less

Submitted 17 September, 2012; v1 submitted 24 November, 2011; originally announced November 2011.

Comments: This version contains a correction of a ty** error in the caption of Fig. 2. The DOI to the article published in Nucl. Instr. Meth A was also added

The CMS Event Builder

Authors: V. Brigljevic, G. Bruno, E. Cano, S. Cittolin, A. Csilling, D. Gigi, F. Glege, R. Gomez-Reino, M. Gulmini, J. Gutleber, C. Jacobs, M. Kozlovszky, H. Larsen, I. Magrans de Abril, F. Meijers, E. Meschi, S. Murray, A. Oh, L. Orsini, L. Pollet, A. Racz, D. Samyn, P. Scharff-Hansen, C. Schwick, P. Sphicas , et al. (10 additional authors not shown)

Abstract: The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation. This paper describes… ▽ More The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation. This paper describes studies of an EVB test-bench based on 64 PCs acting as data sources and data consumers and employing both Gigabit Ethernet and Myrinet technologies as the interconnect. In the case of Ethernet, protocols based on Layer-2 frames and on TCP/IP are evaluated. Results from ongoing studies, including measurements on throughput and scaling are presented. The architecture of the baseline CMS event builder will be outlined. The event builder is organised into two stages with intelligent buffers in between. The first stage contains 64 switches performing a first level of data concentration by building super-fragments from fragments of 8 data sources. The second stage combines the 64 super-fragments into full events. This architecture allows installation of the second stage of the event builder in steps, with the overall throughput scaling linearly with the number of switches in the second stage. Possible implementations of the components of the event builder are discussed and the expected performance of the full event builder is outlined. △ Less

Submitted 20 June, 2003; originally announced June 2003.

Comments: Conference CHEP03