-
Latest Development of Electropolishing Optimization for 650 MHz Niobium Cavity
Authors:
V. Chouhan,
D. Bice,
D. Burk,
S. Chandrasekaran,
A. Cravatta,
P. Dubiel,
G. V. Eremeev,
F. Furuta,
O. Melnychuk,
A. Netepenko,
M. K. Ng,
J. Ozelis,
H. Park,
T. Ring,
G. Wu,
B. Guilfoyle,
M. P. Kelly,
T. Reid
Abstract:
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP param…
▽ More
Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP parameters on the surface of 650 MHz niobium cavities used in the Proton Improvement Plan-II (PIP-II) linear accelerator. Parameters optimized in this study provided a smooth surface of the cavities. The electropolished cavity showed significantly a higher accelerating gradient meeting baseline requirement and qualified for further surface treatment to improve the cavity quality factor.
△ Less
Submitted 26 January, 2024;
originally announced January 2024.
-
Advanced surface treatments for medium-velocity superconducting RF cavities for high accelerating gradient continuous-wave operation
Authors:
K. McGee,
S. Kim,
K. Elliott,
A. Ganshyn,
W. Hartung,
P. Ostroumov,
A. Taylor,
T. Xu,
M. Martinello,
G. V. Eremeev,
A. Netepenko,
F. Furuta,
O. Melnychuk,
M. P. Kelly,
B. Guilfoyle,
T. Reid
Abstract:
Nitrogen-do** and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and fr…
▽ More
Nitrogen-do** and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different cavity styles and frequencies. Strong frequency- and geometry- dependence of these recipes makes the technology transfer amongst different cavity styles and frequencies far from straightforward, and requires rigorous study. Upcoming high-Q0 continuous-wave linear accelerator projects, such as the proposed Michigan State University Facility for Rare Isotope Beam Energy Upgrade, and the underway Fermilab's Proton Improvement Plan-II, could benefit enormously from adapting these techniques to their beta_opt = 0.6 ~650 MHz 5-cell elliptical superconducting rf cavities, operating at an accelerating gradient of around ~17 MV/m. This is the first investigation of the adaptation of nitrogen do** and medium temperature furnace baking to prototype 644 MHz beta_opt = 0.65 cavities, with the aim of demonstrating the high-Q0 potential of these recipes in these novel cavities for future optimization as part of the FRIB400 project R&D. We find that nitrogen-do** delivers superior Q0, despite the sub-GHz operating frequency of these cavities, but is sensitive to the post-do** electropolishing removal step and experiences elevated residual resistance. Medium temperature furnace baking delivers reasonable performance with decreased residual resistance compared to the nitrogen doped cavity, but may require further recipe refinement. The gradient requirement for the FRIB400 upgrade project is comfortably achieved by both recipes.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Demonstration of Niobium Tin in 218 MHz Low-beta Quarter Wave Accelerator Cavity
Authors:
T. B. Petersen,
M. P. Kelly,
T. Reid,
M. Kedzie,
B. Guilfoyle,
G. Chen,
S. Posen,
B. Tennis,
G. Eremeev
Abstract:
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarte…
▽ More
A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb3Sn technology on a low-beta accelerator cavity. Niobiumtin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarter wave cavities (that are subsequently smaller) as well as for significantly lowered cooling requirements (possibly leading to cryocooler based designs). The fabrication, initial cold testing, and Nb3Sn coating are discussed as well as test plans and details of future applications.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Study on Electropolishing Conditions for 650 MHz Niobium SRF Cavity
Authors:
V. Chouhan,
D. Bice,
F. Furuta,
M. Martinello,
M. K. Ng,
H. Park,
T. Ring,
G. Wu,
B. Guilfoyle,
M. P. Kelly,
T. Reid
Abstract:
The PIP II linear accelerator includes different types of niobium SRF cavities including 650 MHz elliptical low (0.61) and high (0.92) beta cavities. The elliptical cavity surface is processed with the electropolishing method. The elliptical cavities especially the low-$β$ 650 MHz cavities showed a rough equator surface after the EP was per-formed with the standard EP conditions. This work was foc…
▽ More
The PIP II linear accelerator includes different types of niobium SRF cavities including 650 MHz elliptical low (0.61) and high (0.92) beta cavities. The elliptical cavity surface is processed with the electropolishing method. The elliptical cavities especially the low-$β$ 650 MHz cavities showed a rough equator surface after the EP was per-formed with the standard EP conditions. This work was focused to study the effect of different EP parameters, including cathode surface area, temperature and voltage, and optimize them to improve the cavity surface.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.