Showing 1–19 of 19 results for author: Griffith, B

Flagellum Pum** Efficacy in Shear-Thinning Viscoelastic Fluids

Authors: Aaron Barrett, Aaron L. Fogelson, M. Gregory Forest, Cole Gruninger, Sookkyung Lim, Boyce E. Griffith

Abstract: Microorganism motility often takes place within complex, viscoelastic fluid environments, e.g., sperm in cervicovaginal mucus and bacteria in biofilms. In such complex fluids, strains and stresses generated by the microorganism are stored and relax across a spectrum of length and time scales and the complex fluid can be driven out of its linear response regime. Phenomena not possible in viscous me… ▽ More Microorganism motility often takes place within complex, viscoelastic fluid environments, e.g., sperm in cervicovaginal mucus and bacteria in biofilms. In such complex fluids, strains and stresses generated by the microorganism are stored and relax across a spectrum of length and time scales and the complex fluid can be driven out of its linear response regime. Phenomena not possible in viscous media thereby arise from feedback between the "swimmer" and the complex fluid, making swimming efficiency co-dependent on the propulsion mechanism and fluid properties. Here we parameterize a flagellar motor and filament properties together with elastic relaxation and nonlinear shear-thinning properties of the fluid in a computational immersed boundary model. We then explore swimming efficiency over this parameter space. One exemplary insight is that motor efficiency (measured by the volumetric flow rate) can be boosted vs.\ degraded by moderate vs.\ strong shear-thinning of the viscoelastic environment. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 15 pages, 8 figures

Benchmarking the Immersed Boundary Method for Viscoelastic Flows

Authors: Cole Gruninger, Aaron Barrett, Fuhui Fang, M. Gregory Forest, Boyce E. Griffith

Abstract: We present and analyze a series of benchmark tests regarding the application of the immersed boundary (IB) method to viscoelastic flows through and around non-trivial, stationary geometries. The IB method is widely used for the simulation of biological fluid dynamics and other modeling scenarios where a structure is immersed in a fluid. Although the IB method has been most commonly used to model s… ▽ More We present and analyze a series of benchmark tests regarding the application of the immersed boundary (IB) method to viscoelastic flows through and around non-trivial, stationary geometries. The IB method is widely used for the simulation of biological fluid dynamics and other modeling scenarios where a structure is immersed in a fluid. Although the IB method has been most commonly used to model systems with viscous incompressible fluids, it also can be applied to visoelastic fluids, and has enabled the study of a wide variety of dynamical problems including the settling of vesicles and the swimming of elastic filaments in fluids modeled by the Oldroyd-B constuitive equation. However, to date, relatively little work has explored the accuracy or convergence properties of the numerical scheme. Herein, we present benchmarking results for an IB solver applied to viscoelastic flows in and around non-trivial geometries using the idealized Oldroyd-B and more realistic, polymer-entanglement-based Rolie-Poly constitutive equations. We use two-dimensional numerical test cases along with results from rheology experiments to benchmark the IB method and compare it to more complex finite element and finite volume viscoelastic flow solvers. Additionally, we analyze different choices of regularized delta function and relative Lagrangian grid spacings which allow us to identify and recommend the key choices of these numerical parameters depending on the present flow regime. △ Less

Submitted 14 January, 2024; v1 submitted 1 September, 2023; originally announced September 2023.

Comments: 31 pages, 15 figures

Simulating Cardiac Fluid Dynamics in the Human Heart

Authors: Marshall Davey, Charles Puelz, Simone Rossi, Margaret Anne Smith, David R. Wells, Greg Sturgeon, W. Paul Segars, John P. Vavalle, Charles S. Peskin, Boyce E. Griffith

Abstract: Cardiac fluid dynamics fundamentally involves interactions between complex blood flows and the structural deformations of the muscular heart walls and the thin, flexible valve leaflets. There has been longstanding scientific, engineering, and medical interest in creating mathematical models of the heart that capture, explain, and predict these fluid-structure interactions. However, existing comput… ▽ More Cardiac fluid dynamics fundamentally involves interactions between complex blood flows and the structural deformations of the muscular heart walls and the thin, flexible valve leaflets. There has been longstanding scientific, engineering, and medical interest in creating mathematical models of the heart that capture, explain, and predict these fluid-structure interactions. However, existing computational models that account for interactions among the blood, the actively contracting myocardium, and the cardiac valves are limited in their abilities to predict valve performance, resolve fine-scale flow features, or use realistic descriptions of tissue biomechanics. Here we introduce and benchmark a comprehensive mathematical model of cardiac fluid dynamics in the human heart. A unique feature of our model is that it incorporates biomechanically detailed descriptions of all major cardiac structures that are calibrated using tensile tests of human tissue specimens to reflect the heart's microstructure. Further, it is the first fluid-structure interaction model of the heart that provides anatomically and physiologically detailed representations of all four cardiac valves. We demonstrate that this integrative model generates physiologic dynamics, including realistic pressure-volume loops that automatically capture isovolumetric contraction and relaxation, and predicts fine-scale flow features. None of these outputs are prescribed; instead, they emerge from interactions within our comprehensive description of cardiac physiology. Such models can serve as tools for predicting the impacts of medical devices or clinical interventions. They also can serve as platforms for mechanistic studies of cardiac pathophysiology and dysfunction, including congenital defects, cardiomyopathies, and heart failure, that are difficult or impossible to perform in patients. △ Less

Submitted 24 October, 2023; v1 submitted 5 July, 2023; originally announced July 2023.

How swimming style affects schooling of two fish-like wavy hydrofoils

Authors: Zhonglu Lin, Amneet Pal Singh Bhalla, Boyce E. Griffith, Zi Sheng, Hongquan Li, Dongfang Liang, Yu Zhang

Abstract: Fish swimming style and schooling behaviour are two important aspects of underwater locomotion. How swimming style affects fish schooling is investigated by a representative problem setup consisting of two tethered NACA0012 hydrofoils undulating in a free stream flow at various wavelengths $ λ^* = 0.8 - 8 $, front-back distance $ D = 0,\ 0.25,\ 0.5,\ 0.75 $, phase difference… ▽ More Fish swimming style and schooling behaviour are two important aspects of underwater locomotion. How swimming style affects fish schooling is investigated by a representative problem setup consisting of two tethered NACA0012 hydrofoils undulating in a free stream flow at various wavelengths $ λ^* = 0.8 - 8 $, front-back distance $ D = 0,\ 0.25,\ 0.5,\ 0.75 $, phase difference $ φ/π= 0,\ 0.5,\ 1,\ 1.5 $, and lateral gap distance $ G = 0.25,\ 0.3,\ 0.35 $ with fixed Reynolds number $ Re = 5000 $, Strouhal number $ St = 0.4 $, and maximum amplitude $ A_{max} = 0.1 $. In total, 336 cases were simulated by open-source software IBAMR based on immersed boundary method. The increase in wavelength generally leads to higher thrust and lateral force, consistent with a previous study regarding a single swimmer. The highest Froude efficiency is obtained at intermediate wavelength $ λ^* = 2 $ for either individual or two foils as a group. At side-by-side arrangement $ D = 0 $, the thrust force upon the two foils can be equivalent, indicating a stable formation. At staggered arrangement, $ D > 0 $, the follower can take significant advantage of the leader in locomotion performance by tuning phase difference. The follower's benefit decreases with relative distance. Various combinations of wavelength and relative distance can lead to distinct flow structures, indicating a tunable stealth capacity of the schooling swimmers. △ Less

Submitted 21 December, 2022; v1 submitted 4 September, 2022; originally announced September 2022.

Comments: 53 pages, 21 figures

A Model of Fluid-Structure and Biochemical Interactions for Applications to Subclinical Leaflet Thrombosis

Authors: Aaron Barrett, Jordan A. Brown, Margaret Anne Smith, Andrew Woodward, John P. Vavalle, Arash Kheradvar, Boyce E. Griffith, Aaron L. Fogelson

Abstract: Subclinical leaflet thrombosis (SLT) is a potentially serious complication of aortic valve replacement with a bioprosthetic valve in which blood clots form on the replacement valve. SLT is associated with increased risk of transient ischemic attacks and strokes and can progress to clinical leaflet thrombosis. SLT following aortic valve replacement also may be related to subsequent structural valve… ▽ More Subclinical leaflet thrombosis (SLT) is a potentially serious complication of aortic valve replacement with a bioprosthetic valve in which blood clots form on the replacement valve. SLT is associated with increased risk of transient ischemic attacks and strokes and can progress to clinical leaflet thrombosis. SLT following aortic valve replacement also may be related to subsequent structural valve deterioration, which can impair the durability of the valve replacement. Because of the difficulty in clinical imaging of SLT, models are needed to determine the mechanisms of SLT and could eventually predict which patients will develop SLT. To this end, we develop methods to simulate leaflet thrombosis that combine fluid-structure interaction and a simplified thrombosis model that allows for deposition along the moving leaflets. Additionally, this model can be adapted to model deposition or absorption along other moving boundaries. We present convergence results and quantify the model's ability to realize changes in valve opening and pressures. These new approaches are an important advancement in our tools for modeling thrombosis in which they incorporate both adhesion to the surface of the moving leaflets and feedback to the fluid-structure interaction. △ Less

Submitted 7 February, 2023; v1 submitted 3 May, 2022; originally announced May 2022.

Comments: 29 pages, 11 figures

A sharp interface Lagrangian-Eulerian method for flexible-body fluid-structure interaction

Authors: Ebrahim M. Kolahdouz, David R. Wells, Simone Rossi, Kenneth I. Aycock, Brent A. Craven, Boyce E. Griffith

Abstract: This paper introduces a sharp-interface approach to simulating fluid-structure interaction involving flexible bodies described by general nonlinear material models and across a broad range of mass density ratios. This new flexible-body immersed Lagrangian-Eulerian (ILE) approach incorporates the geometrical and domain solution flexibility of the immersed boundary (IB) method with an accuracy compa… ▽ More This paper introduces a sharp-interface approach to simulating fluid-structure interaction involving flexible bodies described by general nonlinear material models and across a broad range of mass density ratios. This new flexible-body immersed Lagrangian-Eulerian (ILE) approach incorporates the geometrical and domain solution flexibility of the immersed boundary (IB) method with an accuracy comparable to body-fitted approaches that sharply resolve flows and stresses up to the fluid-structure interface. Unlike many IB methods, our ILE formulation uses distinct momentum equations for the fluid and solid subregions with a Dirichlet-Neumann coupling strategy that connects fluid and solid subproblems through simple interface conditions. We use a penalty method involving two representations of the fluid-structure interface. These two representations are connected by approximate Lagrange multiplier forces that impose kinematic interface conditions. This approach also enables the use of multi-rate time step**, which allows us to take different time step sizes for the fluid and structure subproblems. Our fluid solver relies on an immersed interface method for discrete surfaces to impose stress jump conditions along complex interfaces. The dynamics of the volumetric structural mesh are determined using a standard finite element approach to large-deformation nonlinear elasticity via a nearly incompressible solid mechanics formulation. This formulation also readily accommodates compressible structures for cases in which part of the solid boundary does not contact the incompressible fluid. Comparisons are made with computational and experimental benchmarks. We also demonstrate the capabilities of this methodology by applying it to model the transport and capture of a cylindrical blood clot in an inferior vena cava filter. △ Less

Submitted 29 January, 2023; v1 submitted 27 April, 2022; originally announced April 2022.

Models for plasma kinetics during simultaneous therapeutic plasma exchange and extracorporeal membrane oxygenation

Authors: Charles Puelz, Zach Danial, Jon Marinaro, Jay S. Raval, Boyce E. Griffith, Charles S. Peskin

Abstract: This paper focuses on the derivation and simulation of mathematical models describing new plasma fraction in blood for patients undergoing simultaneous extracorporeal membrane oxygenation and therapeutic plasma exchange. Models for plasma exchange with either veno-arterial or veno-venous extracorporeal membrane oxygenation are considered. Two classes of models are derived for each case, one in the… ▽ More This paper focuses on the derivation and simulation of mathematical models describing new plasma fraction in blood for patients undergoing simultaneous extracorporeal membrane oxygenation and therapeutic plasma exchange. Models for plasma exchange with either veno-arterial or veno-venous extracorporeal membrane oxygenation are considered. Two classes of models are derived for each case, one in the form of an algebraic delay equation and another in the form of a system of delay differential equations. In special cases, our models reduce to single compartment ones for plasma exchange that have been validated with experimental data. We also show that the algebraic delay equations are forward Euler discretizations of the delay differential equations, with timesteps equal to transit times through model compartments. Numerical simulations are performed to compare different model types, to investigate the impact of plasma device port switching on the efficiency of the exchange process, and to study the sensitivity of the models to their parameters. △ Less

Submitted 10 June, 2020; originally announced June 2020.

An immersed interface-lattice Boltzmann method for fluid-structure interaction

Authors: Jianhua Qin, Ebrahim M. Kolahdouz, Boyce E. Griffith

Abstract: An immersed interface-lattice Boltzmann method (II-LBM) is developed for modelling fluid-structure systems. The key element of this approach is the determination of the jump conditions that are satisfied by the distribution functions within the framework of the lattice Boltzmann method when forces are imposed along a surface immersed in an incompressible fluid. In this initial II-LBM, the disconti… ▽ More An immersed interface-lattice Boltzmann method (II-LBM) is developed for modelling fluid-structure systems. The key element of this approach is the determination of the jump conditions that are satisfied by the distribution functions within the framework of the lattice Boltzmann method when forces are imposed along a surface immersed in an incompressible fluid. In this initial II-LBM, the discontinuity related to the normal portion of the interfacial force is sharply resolved by imposing the relevant jump conditions using an approach that is analogous to imposing the corresponding pressure jump condition in the incompressible Navier-Stokes equations. We show that the jump conditions for the distribution functions are the same in both single-relaxation-time and multi-relaxation-time LBM formulations. Tangential forces are treated using the immersed boundary-lattice Boltzmann method (IB-LBM). The performance of the II-LBM method is compared to both the direct forcing IB-LBM for rigid-body fluid-structure interaction, and the classical IB-LBM for elastic interfaces. Higher order accuracy is observed with the II-LBM as compared to the IB-LBM for selected benchmark problems. Because the jump conditions of the distribution function also satisfy the continuity of the velocity field across the interface, the error in the velocity field is much smaller for the II-LBM than the IB-LBM. The II-LBM is also demonstrated to provide superior volume conservation when simulating flexible boundaries. △ Less

Submitted 26 March, 2020; originally announced March 2020.

Journal ref: Journal of Computational Physics, Volume 428, 1 March 2021, 109807

An Immersed Interface Method for Discrete Surfaces

Authors: Ebrahim M. Kolahdouz, Amneet Pal Singh Bhalla, Brent A. Craven, Boyce E. Griffith

Abstract: Fluid-structure systems occur in a range of scientific and engineering applications. The immersed boundary(IB) method is a widely recognized and effective modeling paradigm for simulating fluid-structure interaction(FSI) in such systems, but a difficulty of the IB formulation is that the pressure and viscous stress are generally discontinuous at the interface. The conventional IB method regularize… ▽ More Fluid-structure systems occur in a range of scientific and engineering applications. The immersed boundary(IB) method is a widely recognized and effective modeling paradigm for simulating fluid-structure interaction(FSI) in such systems, but a difficulty of the IB formulation is that the pressure and viscous stress are generally discontinuous at the interface. The conventional IB method regularizes these discontinuities, which typically yields low-order accuracy at these interfaces. The immersed interface method(IIM) is an IB-like approach to FSI that sharply imposes stress jump conditions, enabling higher-order accuracy, but prior applications of the IIM have been largely restricted to methods that rely on smooth representations of the interface geometry. This paper introduces an IIM that uses only a C0 representation of the interface,such as those provided by standard nodal Lagrangian FE methods. Verification examples for models with prescribed motion demonstrate that the method sharply resolves stress discontinuities along the IB while avoiding the need for analytic information of the interface geometry. We demonstrate that only the lowest-order jump conditions for the pressure and velocity gradient are required to realize global 2nd-order accuracy. Specifically,we show 2nd-order global convergence rate along with nearly 2nd-order local convergence in the Eulerian velocity, and between 1st-and 2nd-order global convergence rates along with 1st-order local convergence for the Eulerian pressure. We also show 2nd-order local convergence in the interfacial displacement and velocity along with 1st-order local convergence in the fluid traction. As a demonstration of the method's ability to tackle complex geometries,this approach is also used to simulate flow in an anatomical model of the inferior vena cava. △ Less

Submitted 9 June, 2022; v1 submitted 17 December, 2018; originally announced December 2018.

Comments: - Added a non-axisymmetric example (flow within eccentric rotating cylinder in Sec. 4.3) - Added a more in-depth analysis and comparison with a body-fitted approach for the application in Sec. 4.7

A robust incompressible Navier-Stokes solver for high density ratio multiphase flows

Authors: Nishant Nangia, Boyce E. Griffith, Neelesh A. Patankar, Amneet Pal Singh Bhalla

Abstract: This paper presents a robust, adaptive numerical scheme for simulating high density ratio and high shear multiphase flows on locally refined Cartesian grids that adapt to the evolving interfaces and track regions of high vorticity. The algorithm combines the interface capturing level set method with a variable-coefficient incompressible Navier-Stokes solver that is demonstrated to stably resolve m… ▽ More This paper presents a robust, adaptive numerical scheme for simulating high density ratio and high shear multiphase flows on locally refined Cartesian grids that adapt to the evolving interfaces and track regions of high vorticity. The algorithm combines the interface capturing level set method with a variable-coefficient incompressible Navier-Stokes solver that is demonstrated to stably resolve material contrast ratios of up to six orders of magnitude. The discretization approach ensures second-order pointwise accuracy for both velocity and pressure with several physical boundary treatments, including velocity and traction boundary conditions. The paper includes several test cases that demonstrate the order of accuracy and algorithmic scalability of the flow solver. To ensure the stability of the numerical scheme in the presence of high density and viscosity ratios, we employ a consistent treatment of mass and momentum transport in the conservative form of discrete equations. This consistency is achieved by solving an additional mass balance equation, which we approximate via a strong stability preserving Runga-Kutta time integrator and by employing the same mass flux (obtained from the mass equation) in the discrete momentum equation. The scheme uses higher-order total variation diminishing (TVD) and convection-boundedness criterion (CBC) satisfying limiter to avoid numerical fluctuations in the transported density field. The high-order bounded convective transport is done on a dimension-by-dimension basis, which makes the scheme simple to implement. We also demonstrate through several test cases that the lack of consistent mass and momentum transport in non-conservative formulations, which are commonly used in practice, or the use of non-CBC satisfying limiters can yield very large numerical error and very poor accuracy for convection-dominant high density ratio flows. △ Less

Submitted 1 September, 2019; v1 submitted 31 August, 2018; originally announced September 2018.

Comments: Figures are compressed to comply with arXiv size requirements

Transition in swimming direction in a model self-propelled inertial swimmer

Authors: Thomas Dombrowski, Shannon K. Jones, Georgios Katsikis, Amneet Pal Singh Bhalla, Boyce E. Griffith, Daphne Klotsa

Abstract: We propose a reciprocal, self-propelled model swimmer at intermediate Reynolds numbers ($Re$). Our swimmer consists of two unequal spheres that oscillate in antiphase generating nonlinear steady streaming (SS) flows. We show computationally that the SS flows enable the swimmer to propel itself, and also switch direction as $Re$ increases. We quantify the transition in the swimming direction by col… ▽ More We propose a reciprocal, self-propelled model swimmer at intermediate Reynolds numbers ($Re$). Our swimmer consists of two unequal spheres that oscillate in antiphase generating nonlinear steady streaming (SS) flows. We show computationally that the SS flows enable the swimmer to propel itself, and also switch direction as $Re$ increases. We quantify the transition in the swimming direction by collapsing our data on a critical $Re$ and show that the transition in swimming directions corresponds to the reversal of the SS flows. Based on our findings, we propose that SS can be an important physical mechanism for motility at intermediate $Re$. △ Less

Submitted 7 November, 2018; v1 submitted 11 January, 2018; originally announced January 2018.

Comments: 6 pages, 3 figures

Journal ref: Phys. Rev. Fluids 4, 021101 (2019)

Image-based immersed boundary model of the aortic root

Authors: Ali Hasan, Ebrahim M. Kolahdouz, Andinet Enquobahrie, Thomas G. Caranasos, John P. Vavalle, Boyce E. Griffith

Abstract: Each year, approximately 300,000 heart valve repair or replacement procedures are performed worldwide, including approximately 70,000 aortic valve replacement surgeries in the United States alone. This paper describes progress in constructing anatomically and physiologically realistic immersed boundary (IB) models of the dynamics of the aortic root and ascending aorta. This work builds on earlier… ▽ More Each year, approximately 300,000 heart valve repair or replacement procedures are performed worldwide, including approximately 70,000 aortic valve replacement surgeries in the United States alone. This paper describes progress in constructing anatomically and physiologically realistic immersed boundary (IB) models of the dynamics of the aortic root and ascending aorta. This work builds on earlier IB models of fluid-structure interaction (FSI) in the aortic root, which previously achieved realistic hemodynamics over multiple cardiac cycles, but which also were limited to simplified aortic geometries and idealized descriptions of the biomechanics of the aortic valve cusps. By contrast, the model described herein uses an anatomical geometry reconstructed from patient-specific computed tomography angiography (CTA) data, and employs a description of the elasticity of the aortic valve leaflets based on a fiber-reinforced constitutive model fit to experimental tensile test data. Numerical tests show that the model is able to resolve the leaflet biomechanics in diastole and early systole at practical grid spacings. The model is also used to examine differences in the mechanics and fluid dynamics yielded by fresh valve leaflets and glutaraldehyde-fixed leaflets similar to those used in bioprosthetic heart valves. Although there are large differences in the leaflet deformations during diastole, the differences in the open configurations of the valve models are relatively small, and nearly identical hemodynamics are obtained in all cases considered. △ Less

Submitted 4 May, 2017; originally announced May 2017.

A coupled mitral valve -- left ventricle model with fluid-structure interaction

Authors: Hao Gao, Liuyang Feng, Nan Qi, Colin Berry, Boyce Griffith, Xiaoyu Luo

Abstract: Understanding the interaction between the valves and walls of the heart is important in assessing and subsequently treating heart dysfunction. With advancements in cardiac imaging, nonlinear mechanics and computational techniques, it is now possible to explore the mechanics of valve-heart interactions using anatomically and physiologically realistic models. This study presents an integrated model… ▽ More Understanding the interaction between the valves and walls of the heart is important in assessing and subsequently treating heart dysfunction. With advancements in cardiac imaging, nonlinear mechanics and computational techniques, it is now possible to explore the mechanics of valve-heart interactions using anatomically and physiologically realistic models. This study presents an integrated model of the mitral valve (MV) coupled to the left ventricle (LV), with the geometry derived from in vivo clinical magnetic resonance images. Numerical simulations using this coupled MV-LV model are developed using an immersed boundary/finite element method. The model incorporates detailed valvular features, left ventricular contraction, nonlinear soft tissue mechanics, and fluid-mediated interactions between the MV and LV wall. We use the model to simulate the cardiac function from diastole to systole, and investigate how myocardial active relaxation function affects the LV pump function. The results of the new model agree with in vivo measurements, and demonstrate that the diastolic filling pressure increases significantly with impaired myocardial active relaxation to maintain the normal cardiac output. The coupled model has the potential to advance fundamental knowledge of mechanisms underlying MV-LV interaction, and help in risk stratification and optimization of therapies for heart diseases. △ Less

Submitted 28 March, 2017; originally announced April 2017.

Comments: 25 pages, 6 figures

An Immersed Boundary Method with Divergence-Free Velocity Interpolation and Force Spreading

Authors: Yuanxun Bao, Aleksandar Donev, Boyce E. Griffith, David M. McQueen, Charles S. Peskin

Abstract: The Immersed Boundary (IB) method is a mathematical framework for constructing robust numerical methods to study fluid-structure interaction in problems involving an elastic structure immersed in a viscous fluid. The IB formulation uses an Eulerian representation of the fluid and a Lagrangian representation of the structure. The Lagrangian and Eulerian frames are coupled by integral transforms wit… ▽ More The Immersed Boundary (IB) method is a mathematical framework for constructing robust numerical methods to study fluid-structure interaction in problems involving an elastic structure immersed in a viscous fluid. The IB formulation uses an Eulerian representation of the fluid and a Lagrangian representation of the structure. The Lagrangian and Eulerian frames are coupled by integral transforms with delta function kernels. The discretized IB equations use approximations to these transforms with regularized delta function kernels to interpolate the fluid velocity to the structure, and to spread structural forces to the fluid. It is well-known that the conventional IB method can suffer from poor volume conservation since the interpolated Lagrangian velocity field is not generally divergence-free, and so this can cause spurious volume changes. In practice, the lack of volume conservation is especially pronounced for cases where there are large pressure differences across thin structural boundaries. The aim of this paper is to greatly reduce the volume error of the IB method by introducing velocity-interpolation and force-spreading schemes with the properties that the interpolated velocity field in which the structure moves is at least C1 and satisfies a continuous divergence-free condition, and that the force-spreading operator is the adjoint of the velocity-interpolation operator. We confirm through numerical experiments in two and three spatial dimensions that this new IB method is able to achieve substantial improvement in volume conservation compared to other existing IB methods, at the expense of a modest increase in the computational cost. Further, the new method provides smoother Lagrangian forces (tractions) than traditional IB methods. The method presented here is restricted to periodic computational domains. Its generalization to non-periodic domains is important future work. △ Less

Submitted 15 June, 2017; v1 submitted 25 January, 2017; originally announced January 2017.

Comments: 49 pages, 13 figures

A continuum mechanics-based musculo-mechanical model for esophageal transport

Authors: Wenjun Kou, Boyce E. Griffith, John E. Pandolfino, Peter J. Kahrilas, Neelesh A. Patankar

Abstract: In this work, we extend our previous esophageal transport model using an immersed boundary (IB) method with discrete fiber-based structures, to one using a continuum mechanics-based model that is approximated based on finite elements (IB-FE). To deal with the leakage of flow when the Lagrangian mesh becomes coarser than the fluid mesh, we employ adaptive interaction quadrature points for Lagrangia… ▽ More In this work, we extend our previous esophageal transport model using an immersed boundary (IB) method with discrete fiber-based structures, to one using a continuum mechanics-based model that is approximated based on finite elements (IB-FE). To deal with the leakage of flow when the Lagrangian mesh becomes coarser than the fluid mesh, we employ adaptive interaction quadrature points for Lagrangian-Eulerian interaction equations based on a previous work. In particular, we introduce a new anisotropic adaptive interaction quadrature rule. The new rule permits us to vary the interaction quadrature points not only at each time-step and element but also at different orientations per element. For the material model, we extend our previous fiber-based model to a continuum-based model. We first study a case in which a three-dimensional short tube is dilated. Results match very well with those from the implicit FE method. We remark that in our IB-FE case, the three-dimensional tube undergoes a very large deformation and the Lagrangian mesh-size becomes about 6 times of Eulerian mesh-size. To validate the method in handling fiber-matrix material models, we perform a second study on dilating a long fiber-reinforced tube. Errors are small when we compare numerical solutions with analytical solutions. The technique is then applied to the problem of esophageal transport. We present three cases that differ in the material model and muscle fiber architecture. The overall transport features are consistent with those from the previous model. We remark that the continuum-based model can handle more realistic and complicated material behavior. This is demonstrated in our third case with spatially varying fiber architecture. We find this unique muscle fiber architecture could generate a so-called pressure transition zone. This suggests an important role of muscle fiber architecture in esophageal transport. △ Less

Submitted 13 September, 2016; originally announced September 2016.

Comments: 47 pages, 17 figures

A fully resolved active musculo-mechanical model for esophageal transport

Authors: Wenjun Kou, Amneet Pal Singh Bhalla, Boyce E. Griffith, John E. Pandolfino, Peter J. Kahrilas, Neelesh A. Patankar

Abstract: Esophageal transport is a physiological process that mechanically transports an ingested food bolus from the pharynx to the stomach via the esophagus, a multi-layered muscular tube. This process involves interactions between the bolus, the esophagus, and the neurally coordinated activation of the esophageal muscles. In this work, we use an immersed boundary (IB) approach to simulate peristaltic tr… ▽ More Esophageal transport is a physiological process that mechanically transports an ingested food bolus from the pharynx to the stomach via the esophagus, a multi-layered muscular tube. This process involves interactions between the bolus, the esophagus, and the neurally coordinated activation of the esophageal muscles. In this work, we use an immersed boundary (IB) approach to simulate peristaltic transport in the esophagus. The bolus is treated as a viscous fluid that is actively transported by the muscular esophagus, which is modeled as an actively contracting, fiber-reinforced tube. A simplified version of our model is verified by comparison to an analytic solution to the tube dilation problem. Three different complex models of the multi-layered esophagus, which differ in their activation patterns and the layouts of the mucosal layers, are then extensively tested. To our knowledge, these simulations are the first of their kind to incorporate the bolus, the multi-layered esophagus tube, and muscle activation into an integrated model. Consistent with experimental observations, our simulations capture the pressure peak generated by the muscle activation pulse that travels along the bolus tail. These fully resolved simulations provide new insights into roles of the mucosal layers during bolus transport. In addition, the information on pressure and the kinematics of the esophageal wall due to the coordination of muscle activation is provided, which may help relate clinical data from manometry and ultrasound images to the underlying esophageal motor function. △ Less

Submitted 8 January, 2015; originally announced January 2015.

Journal ref: Journal of Computational Physics, Volume 298, 1 October 2015, Pages 446-465

Brownian Dynamics without Green's Functions

Authors: S. Delong, F. Balboa Usabiaga, R. Delgado-Buscalioni, B. E. Griffith, A. Donev

Abstract: We develop a Fluctuating Immersed Boundary (FIB) method for performing Brownian dynamics simulations of confined particle suspensions. Unlike traditional methods which employ analytical Green's functions for Stokes flow in the confined geometry, the FIB method uses a fluctuating finite-volume Stokes solver to generate the action of the response functions "on the fly". Importantly, we demonstrate t… ▽ More We develop a Fluctuating Immersed Boundary (FIB) method for performing Brownian dynamics simulations of confined particle suspensions. Unlike traditional methods which employ analytical Green's functions for Stokes flow in the confined geometry, the FIB method uses a fluctuating finite-volume Stokes solver to generate the action of the response functions "on the fly". Importantly, we demonstrate that both the deterministic terms necessary to capture the hydrodynamic interactions among the suspended particles, as well as the stochastic terms necessary to generate the hydrodynamically-correlated Brownian motion, can be generated by solving the steady Stokes equations numerically only once per time step. This is accomplished by including a stochastic contribution to the stress tensor in the fluid equations consistent with fluctuating hydrodynamics. We develop novel temporal integrators that account for the multiplicative nature of the noise in the equations of Brownian dynamics and the strong dependence of the mobility on the configuration for confined systems. Notably, we propose a random finite difference approach to approximating the stochastic drift proportional to the divergence of the configuration-dependent mobility matrix. Through comparisons with analytical and existing computational results, we numerically demonstrate the ability of the FIB method to accurately capture both the static (equilibrium) and dynamic properties of interacting particles in flow. △ Less

Submitted 26 June, 2015; v1 submitted 16 January, 2014; originally announced January 2014.

Comments: For software see https://github.com/stochasticHydroTools/MixingIBAMR This version is updated relative to journal version with some fixes and an updated Figs. 1 and 4 and Table 1 to show latest boundary condition capabilities of the IBAMR code

Journal ref: J. Chem. Phys., 140, 134110, 2014

Temporal Integrators for Fluctuating Hydrodynamics

Authors: S. Delong, B. E. Griffith, E. Vanden-Eijnden, A. Donev

Abstract: Including the effect of thermal fluctuations in traditional computational fluid dynamics requires develo** numerical techniques for solving the stochastic partial differential equations of fluctuating hydrodynamics. These Langevin equations possess a special fluctuation-dissipation structure that needs to be preserved by spatio-temporal discretizations in order for the computed solution to repro… ▽ More Including the effect of thermal fluctuations in traditional computational fluid dynamics requires develo** numerical techniques for solving the stochastic partial differential equations of fluctuating hydrodynamics. These Langevin equations possess a special fluctuation-dissipation structure that needs to be preserved by spatio-temporal discretizations in order for the computed solution to reproduce the correct long-time behavior. In particular, numerical solutions should approximate the Gibbs-Boltzmann equilibrium distribution, and ideally this will hold even for large time step sizes. We describe finite-volume spatial discretizations for the fluctuating Burgers and fluctuating incompressible Navier-Stokes equations that obey a discrete fluctuation-dissipation balance principle just like the continuum equations. We develop implicit-explicit predictor-corrector temporal integrators for the resulting stochastic method-of-lines discretization. These stochastic Runge-Kutta schemes treat diffusion implicitly and advection explicitly, are weakly second-order accurate for additive noise for small time steps, and give a good approximation to the equilibrium distribution even for very strong fluctuations. Numerical results demonstrate that a midpoint predictor-corrector scheme is very robust over a broad range of time step sizes. △ Less

Submitted 21 February, 2013; v1 submitted 5 December, 2012; originally announced December 2012.

Comments: Submitted to Phys. Rev. E

Staggered Schemes for Fluctuating Hydrodynamics

Authors: F. B. Balboa, J. B. BelL, R. Delgado-Buscalioni, A. Donev, T. G. Fai, B. E. Griffith, C. S. Peskin

Abstract: We develop numerical schemes for solving the isothermal compressible and incompressible equations of fluctuating hydrodynamics on a grid with staggered momenta. We develop a second-order accurate spatial discretization of the diffusive, advective and stochastic fluxes that satisfies a discrete fluctuation-dissipation balance, and construct temporal discretizations that are at least second-order ac… ▽ More We develop numerical schemes for solving the isothermal compressible and incompressible equations of fluctuating hydrodynamics on a grid with staggered momenta. We develop a second-order accurate spatial discretization of the diffusive, advective and stochastic fluxes that satisfies a discrete fluctuation-dissipation balance, and construct temporal discretizations that are at least second-order accurate in time deterministically and in a weak sense. Specifically, the methods reproduce the correct equilibrium covariances of the fluctuating fields to third (compressible) and second (incompressible) order in the time step, as we verify numerically. We apply our techniques to model recent experimental measurements of giant fluctuations in diffusively mixing fluids in a micro-gravity environment [A. Vailati et. al., Nature Communications 2:290, 2011]. Numerical results for the static spectrum of non-equilibrium concentration fluctuations are in excellent agreement between the compressible and incompressible simulations, and in good agreement with experimental results for all measured wavenumbers. △ Less

Submitted 24 May, 2012; v1 submitted 25 August, 2011; originally announced August 2011.

Comments: Submitted. See also arXiv:0906.2425