-
Scanning quantum correlation microscopy with few emitters
Authors:
Jaret J. Vasquez-Lozano,
Shuo Li,
Andrew D. Greentree
Abstract:
Optical superresolution microscopy is an important field, where nonlinear optical processes or prior information is used to defeat the classical diffraction limit of light. Quantum correlation microscopy uses photon arrival statistics from single photon emitters to aid in the determination of properties including the number of emitters and their relative brightness. Here we model quantum correlati…
▽ More
Optical superresolution microscopy is an important field, where nonlinear optical processes or prior information is used to defeat the classical diffraction limit of light. Quantum correlation microscopy uses photon arrival statistics from single photon emitters to aid in the determination of properties including the number of emitters and their relative brightness. Here we model quantum correlation microscopy in the few emitter regime, i.e. around four single photon emitters below the diffraction limit. We use the Akaike Information Criterion to determine the number of emitters and we vary the relative contributions of intensity to quantum correlation information to determine contribution that provides optimal imaging. Our results show diffraction unlimited performance and a change in localisation scaling behaviour dependant on emitter closeness.
△ Less
Submitted 11 October, 2023;
originally announced October 2023.
-
Continuous-wave nitrogen-vacancy diamond laser system assisted by a red diode laser
Authors:
Lukas Lindner,
Felix A. Hahl,
Tingpeng Luo,
Guillermo Nava Antonio,
Xavier Vidal,
Marcel Rattunde,
Takeshi Ohshima,
Marco Capelli,
Brant C. Gibson,
Andrew D. Greentree,
Rüdiger Quay,
Jan Jeske
Abstract:
Diamond has long been identified as a potential host material for laser applications. This potential arises due to its exceptional thermal properties, ultra-wide bandgap, and color centers which promise gain across the visible spectrum. More recently, coherent laser methods offer new approaches to magnetometry. However, diamond fabrication is difficult in comparison to other crystalline matrices,…
▽ More
Diamond has long been identified as a potential host material for laser applications. This potential arises due to its exceptional thermal properties, ultra-wide bandgap, and color centers which promise gain across the visible spectrum. More recently, coherent laser methods offer new approaches to magnetometry. However, diamond fabrication is difficult in comparison to other crystalline matrices, and many optical loss channels are not yet understood. Here, we demonstrate the first continuous-wave nitrogen-vacancy (NV) color center laser system. To achieve this, we constructed a laser cavity with both, an NV-diamond medium and an intra-cavity anti-reflection coated diode laser. This dual-medium approach compensates intrinsic losses of the cavity by providing a fixed additional gain below threshold of the diode laser. We observe the first clear continuous-wave laser threshold in the output of the laser system as well as linewidth narrowing with increasing green pump power on the NV centers. Our results are a major development towards coherent approaches to magnetometry.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Estimation of the number of single-photon emitters for multiple fluorophores with the same spectral signature
Authors:
Wenchao Li,
Shuo Li,
Timothy C. Brown,
Qiang Sun,
Xuezhi Wang,
Vladislav V. Yakovlev,
Allison Kealy,
Bill Moran,
Andrew D. Greentree
Abstract:
Fluorescence microscopy is of vital importance for understanding biological function. However most fluorescence experiments are only qualitative inasmuch as the absolute number of fluorescent particles can often not be determined. Additionally, conventional approaches to measuring fluorescence intensity cannot distinguish between two or more fluorophores that are excited and emit in the same spect…
▽ More
Fluorescence microscopy is of vital importance for understanding biological function. However most fluorescence experiments are only qualitative inasmuch as the absolute number of fluorescent particles can often not be determined. Additionally, conventional approaches to measuring fluorescence intensity cannot distinguish between two or more fluorophores that are excited and emit in the same spectral window, as only the total intensity in a spectral window can be obtained. Here we show that, by using photon number resolving experiments, we are able to determine the number of emitters and their probability of emission for a number of different species, all with the same measured spectral signature. We illustrate our ideas by showing the determination of the number of emitters per species and the probability of photon collection from that species, for one, two, and three otherwise unresolvable fluorophores. The convolution Binomial model is presented to model the counted photons emitted by multiple species. And then the Expectation-Maximization (EM) algorithm is used to match the measured photon counts to the expected convolution Binomial distribution function. In applying the EM algorithm, to leverage the problem of being trapped in a sub-optimal solution, the moment method is introduced in finding the initial guess of the EM algorithm. Additionally, the associated Cramér-Rao lower bound is derived and compared with the simulation results.
△ Less
Submitted 12 February, 2024; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Handheld device for non-contact thermometry via optically detected magnetic resonance of proximate diamond sensors
Authors:
G. J. Abrahams,
E. Ellul,
I. O. Robertson,
A. Khalid,
A. D. Greentree,
B. C. Gibson,
J. -P. Tetienne
Abstract:
Optically detected magnetic resonance (ODMR) spectroscopy of defect-rich semiconductors is being increasingly exploited for realising a variety of practical quantum sensing devices. A prime example is the on-going development of compact magnetometers based on the nitrogen-vacancy (NV) defect in diamond for the remote sensing of magnetic signals with high accuracy and sensitivity. In these applicat…
▽ More
Optically detected magnetic resonance (ODMR) spectroscopy of defect-rich semiconductors is being increasingly exploited for realising a variety of practical quantum sensing devices. A prime example is the on-going development of compact magnetometers based on the nitrogen-vacancy (NV) defect in diamond for the remote sensing of magnetic signals with high accuracy and sensitivity. In these applications, the ODMR-active material is integrated into the overall apparatus to form a self-contained sensor. However, some emerging applications require the sensing material to be in physical contact with an external object of interest, thus requiring an independent readout device. Here we present an ODMR-meter, a compact device specially designed to allow convenient, contactless monitoring of ODMR in a target object, and demonstrate its application to temperature monitoring with NV defects. Our prototype is composed of a handheld readout head (integrating all the necessary optical components and a microwave antenna) and a control box connected to a laptop computer, all made primarily from commercial off-the-shelf components. We test our device using an NV-rich bulk diamond as the object, demonstrate a temperature sensitivity of $10~{\rm mK}/\sqrt{\rm Hz}$ in static conditions, and demonstrate the feasibility of handheld operation. The limitations to measurement speed, sensitivity and accuracy are discussed. The presented device may find immediate use in medical and industrial applications where accurate thermometry is required, and can be extended to magnetic field measurements.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
Fluorescence profile of a nitrogen-vacancy center in a nanodiamond
Authors:
Qiang Sun,
Shuo Li,
Taras Plakhotnik,
Andrew D. Greentree
Abstract:
Nanodiamonds containing luminescent point defects are widely explored for applications in quantum bio-sensing such as nanoscale magnetometry, thermometry, and electrometry. A key challenge in the development of such applications is a large variation in fluorescence properties observed between particles, even when obtained from the same batch or nominally identical fabrication processes. By theoret…
▽ More
Nanodiamonds containing luminescent point defects are widely explored for applications in quantum bio-sensing such as nanoscale magnetometry, thermometry, and electrometry. A key challenge in the development of such applications is a large variation in fluorescence properties observed between particles, even when obtained from the same batch or nominally identical fabrication processes. By theoretically modelling the emission of nitrogen-vacancy colour centres in spherical nanoparticles, we are able to show that the fluorescence spectrum varies with the exact position of the emitter within the nanoparticle, with noticeable effects seen when the diamond radius, $a$, is larger than around 100 nm, and significantly modified fluorescence profiles found for larger particles when $a=200$ nm and $a=300$ nm, while negligible effects below $a=100$ nm. These results show that the reproducible geometry of point defect position within narrowly sized batch of diamond crystals is necessary for controlling the emission properties. Our results are useful for understanding the extent to which nanodiamonds can be optimised for bio-sensing applications.
△ Less
Submitted 24 August, 2022; v1 submitted 5 April, 2022;
originally announced April 2022.
-
All-optical determination of one or two emitters using quantum polarization with nitrogen-vacancy centers in diamond
Authors:
Davin Yue Ming Peng,
Josef G. Worboys,
Qiang Sun,
Shuo Li,
Marco Capelli,
Shinobu Onoda,
Takeshi Ohshima,
Philipp Reineck,
Brant C. Gibson,
Andrew D. Greentree
Abstract:
Qubit technologies using nitrogen-vacancy color centers in diamonds require precise knowledge of the centers, including the number of emitters within a diffraction-limited spot and their orientations. However, the number of emitters is challenging to determine when there is finite background, which affects the precision of resulting quantum protocols. Here we show the photoluminescence (PL) intens…
▽ More
Qubit technologies using nitrogen-vacancy color centers in diamonds require precise knowledge of the centers, including the number of emitters within a diffraction-limited spot and their orientations. However, the number of emitters is challenging to determine when there is finite background, which affects the precision of resulting quantum protocols. Here we show the photoluminescence (PL) intensity and quantum correlation (Hanbury Brown and Twiss) measurements as a function of polarization for one- and two-emitter systems. The sample was made by implanting low concentrations of adenine (C5H5N5) into a low nitrogen chemical vapor deposition diamond. This approach yielded well-spaced regions with few nitrogen-vacancy centers. By map** the PL intensity and quantum correlation as a function of polarization, we can distinguish two emitter systems from single emitters with background, providing a method to quantify the background signal at implanted sites, which might be different from off-site background levels. This approach also provides a valuable new all-optical mechanism for the determination of one or two emitter systems useful for quantum sensing, communication, and computation tasks.
△ Less
Submitted 5 June, 2023; v1 submitted 30 March, 2022;
originally announced March 2022.
-
En route to nanoscopic quantum optical imaging: counting emitters with photon-number-resolving detectors
Authors:
Shuo Li,
Wenchao Li,
Vladislav V. Yakovlev,
Allison Kealy,
Andrew D. Greentree
Abstract:
Fundamental understanding of biological pathways requires minimally invasive nanoscopic optical resolution imaging. Many approaches to high-resolution imaging rely on localization of single emitters, such as fluorescent molecule or quantum dot. Exact determination of the number of such emitters in an imaging volume is essential for a number of applications; however, in a commonly employed intensit…
▽ More
Fundamental understanding of biological pathways requires minimally invasive nanoscopic optical resolution imaging. Many approaches to high-resolution imaging rely on localization of single emitters, such as fluorescent molecule or quantum dot. Exact determination of the number of such emitters in an imaging volume is essential for a number of applications; however, in a commonly employed intensity-based microscopy it is not possible to distinguish individual emitters without initial knowledge of system parameters. Here we explore how quantum measurements of the emitted photons using photon number resolving detectors can be used to address this challenging task. In the proposed new approach, the problem of counting emitters reduces to the task of determining differences between the emitted photons and the Poisson limit. We show that quantum measurements of the number of photons emitted from an ensemble of emitters enable the determination of both the number of emitters and the probability of emission. This method can be applied for any type of emitters, including Raman and infrared emitters, which makes it a truly universal way to achieve super-resolution optical imaging. The scaling laws of this new approach are presented by the Cramer-Rao Lower Bounds and define the extent this technique can be used for quantum optical imaging with nanoscopic resolution.
△ Less
Submitted 8 October, 2021;
originally announced October 2021.
-
Magnetic-Field-Dependent Stimulated Emission from Nitrogen-Vacancy Centres in Diamond
Authors:
F. Hahl,
L. Lindner,
X. Vidal,
T. Ohshima,
S. Onoda,
S. Ishii,
A. M. Zaitsev,
M. Capelli,
T. Luo,
B. C. Gibson,
A. D. Greentree,
J. Jeske
Abstract:
Negatively charged nitrogen-vacancy centres in diamond are promising quantum magnetic field sensors. Laser threshold magnetometry has been a theoretical approach for the improvement of NV-centre ensemble sensitivity via increased signal strength and magnetic field contrast. In this work we experimentally demonstrate laser threshold magnetometry. We use a macroscopic high-finesse laser cavity conta…
▽ More
Negatively charged nitrogen-vacancy centres in diamond are promising quantum magnetic field sensors. Laser threshold magnetometry has been a theoretical approach for the improvement of NV-centre ensemble sensitivity via increased signal strength and magnetic field contrast. In this work we experimentally demonstrate laser threshold magnetometry. We use a macroscopic high-finesse laser cavity containing a highly NV-doped and low absorbing diamond gain medium that is pumped at 532nm and resonantly seeded at 710nm. This enables amplification of the signal power by stimulated emission of 64%. We show the magnetic-field dependency of the amplification and thus, demonstrate magnetic-field dependent stimulated emission from an NV-centre ensemble. This emission shows a record contrast of 33% and a maximum output power in the mW regime. These advantages of coherent read-out of NV-centres pave the way for novel cavity and laser applications of quantum defects as well as diamond NV magnetic field sensors with significantly improved sensitivity for the health, research and mining sectors.
△ Less
Submitted 10 September, 2021;
originally announced September 2021.
-
Optical forces and torques on eccentric nanoscale core-shell particles
Authors:
Qiang Sun,
Kishan Dholakia,
Andrew D Greentree
Abstract:
The optical trap** and manipulation of small particles is an important tool for probing fluid properties at the microscale. In particular, microrheology exploits the manipulation and rotation of micron-scale particles to probe local viscosity, especially where these properties may be perturbed as a function of their local environment, for example in the vicinity of cells. To this end, birefringe…
▽ More
The optical trap** and manipulation of small particles is an important tool for probing fluid properties at the microscale. In particular, microrheology exploits the manipulation and rotation of micron-scale particles to probe local viscosity, especially where these properties may be perturbed as a function of their local environment, for example in the vicinity of cells. To this end, birefringent particles are useful as they can be readily controlled using optically induced forces and torques, and thereby used to probe their local environment. However the magnitude of optical torques that can be induced in birefringent particles is small, and a function of the particle diameter, meaning that rotational flow cannot readily be probed on length scales much small than the micron level. Here we show modelling that demonstrates that eccentric spherical core-shell nanoparticles can be used to generate considerable optical torques. The eccentricity is a result of the displacement of the centre of the core from the shell. Our results show that, for particles ranging from 90~nm to 180~nm in diameter, we may achieve rotation rates exceeding 800~Hz. This fills a missing size gap in the rotation of microparticles with optical forces. The diameter of particle we may rotate is almost an order of magnitude smaller than the smallest birefringent particles that have been successfully rotated to date. The rotation of eccentric core-shell nanoparticles therefore makes an important contribution to biophotonics and creates new opportunities for rheology in nanoscale environments.
△ Less
Submitted 10 March, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Fluorescent diamond microparticles doped glass fiber for magnetic field sensing
Authors:
Dongbi Bai,
Minh Hoa Huynh,
David A. Simpson,
Philipp Reineck,
Shahraam A. Vahid,
Andrew D. Greentree,
Scott Foster,
Brant C. Gibson,
Heike Ebendorff-Heidepriem
Abstract:
Diamond containing the negatively charged nitrogen-vacancy (NV) center is emerging as a significant new system for magnetometry. However, most NV sensors require microscopes to collect the fluorescence signals and are therefore limited to laboratory settings. By incorporating micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, a high-sensitivi…
▽ More
Diamond containing the negatively charged nitrogen-vacancy (NV) center is emerging as a significant new system for magnetometry. However, most NV sensors require microscopes to collect the fluorescence signals and are therefore limited to laboratory settings. By incorporating micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, a high-sensitivity and robust fiber platform for magnetic field sensing is demonstrated here. The fluorescence and spin properties of NV centers embedded in the diamond crystals are well preserved during the fiber drawing process, leading to enhanced continuous-wave diamond-magnetometry in fiber-transmitted sensing configurations. The interface do** of diamond particles also leads to reduced fiber propagation loss and benefits the guidance of NV-fluorescence in the hybrid fiber. Using the diamond-fiber system, magnetic field readout through 50 cm of fiber is achieved. This study paves the way for novel fiber-based diamond sensors for field-deployable quantum metrology applications.
△ Less
Submitted 9 March, 2020;
originally announced April 2020.
-
Continuous spatial field confocal thermometry using lanthanide doped tellurite glass
Authors:
D. Stavrevski,
E. Schartner,
I. S. Maksymov,
R. A. McLaughlin,
Heike Ebendorff-Heidepriem,
A. D. Greentree
Abstract:
Quantifying temperature variations at the micron scale can provide new opportunities in optical sensing. In this paper, we present a novel approach using the temperature-dependent variations in fluorescence of rare-earth doped tellurite glass to provide a micron-scale image of temperature variations over a 200 micrometre field of view. We demonstrate the system by monitoring the evaporation of a w…
▽ More
Quantifying temperature variations at the micron scale can provide new opportunities in optical sensing. In this paper, we present a novel approach using the temperature-dependent variations in fluorescence of rare-earth doped tellurite glass to provide a micron-scale image of temperature variations over a 200 micrometre field of view. We demonstrate the system by monitoring the evaporation of a water droplet and report a net temperature change of 7.04 K with a sensitivity of at least 0.12 K. These results establish the practicality of this confocal-based approach to provide high-resolution marker-free optical temperature sensing.
△ Less
Submitted 12 February, 2020;
originally announced February 2020.
-
Modal interferometric refractive index sensing in microstructured exposed core fibres
Authors:
Ivan S. Maksymov,
Heike Ebendorff-Heidepriem,
Andrew D. Greentree
Abstract:
Optical fibre-based sensors measuring refractive index shift in bodily fluids and tissues are versatile and accurate probes of physiological processes. Here, we suggest a refractive index sensor based on a microstructured exposed-core fibre (ECF). By considering a high refractive index coating of the exposed core, our modelling demonstrates the splitting of the guided mode into a surface sensing m…
▽ More
Optical fibre-based sensors measuring refractive index shift in bodily fluids and tissues are versatile and accurate probes of physiological processes. Here, we suggest a refractive index sensor based on a microstructured exposed-core fibre (ECF). By considering a high refractive index coating of the exposed core, our modelling demonstrates the splitting of the guided mode into a surface sensing mode and a mode that is isolated from the surface. With the isolated mode acting as a reference arm, this two-mode one-fibre solution provides for robust interferometric sensing with a sensitivity of up to 60,000 rad/RIU-cm, which is suitable for sensing subtle physiological processes within hard-to-reach places inside living organisms, such as the spinal cord, ovarian tract and blood vessels.
△ Less
Submitted 7 September, 2019;
originally announced September 2019.
-
Beamed UV sonoluminescence by aspherical air bubble collapse near liquid-metal microparticles
Authors:
Bradley Boyd,
Sergey A. Suslov,
Sid Becker,
Andrew D. Greentree,
Ivan S. Maksymov
Abstract:
Irradiation with UV-C band ultraviolet light is one of the most commonly used ways of disinfecting water contaminated by pathogens such as bacteria and viruses. Sonoluminescence, the emission of light from acoustically-induced collapse of air bubbles in water, is an efficient means of generating UV-C light. However, because a spherical bubble collapsing in the bulk of water creates isotropic radia…
▽ More
Irradiation with UV-C band ultraviolet light is one of the most commonly used ways of disinfecting water contaminated by pathogens such as bacteria and viruses. Sonoluminescence, the emission of light from acoustically-induced collapse of air bubbles in water, is an efficient means of generating UV-C light. However, because a spherical bubble collapsing in the bulk of water creates isotropic radiation, the generated UV-C light fluence is insufficient for disinfection. Here, we show that we can create a UV light beam from aspherical air bubble collapse near a gallium-based liquid-metal microparticle. The beam is perpendicular to the metal surface and is caused by the interaction of sonoluminescence light with UV plasmon modes of the metal. We calculate that such beams can generate fluences exceeding $10$ mJ/cm$^2$, which is sufficient to irreversibly inactivate most common pathogens in water with the turbidity of more than $5$ Nephelometric Turbidity Units.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Coupling light and sound: Giant nonlinearities from oscillating bubbles and droplets (Review)
Authors:
Ivan S. Maksymov,
Andrew D. Greentree
Abstract:
Nonlinear optical processes are vital for fields including telecommunications, signal processing, data storage, spectroscopy, sensing, and imaging. As an independent research area, nonlinear optics began with the invention of the laser, because practical sources of intense light needed to generate optical nonlinearities were not previously available. However the high power requirements of many non…
▽ More
Nonlinear optical processes are vital for fields including telecommunications, signal processing, data storage, spectroscopy, sensing, and imaging. As an independent research area, nonlinear optics began with the invention of the laser, because practical sources of intense light needed to generate optical nonlinearities were not previously available. However the high power requirements of many nonlinear optical systems limit their use, especially in portable or medical applications, and so there is a push to develop new materials and resonant structures capable of producing nonlinear optical phenomena with low-power light emitted by inexpensive and compact sources. Acoustic nonlinearities, especially giant acoustic nonlinear phenomena in gas bubbles and liquid droplets, are much stronger than their optical counterparts. Here, we suggest employing acoustic nonlinearities to generate new optical frequencies, thereby effectively reproducing nonlinear optical processes without the need for laser light. We critically survey the current literature dedicated to the interaction of light with nonlinear acoustic waves and highly-nonlinear oscillations of gas bubbles and liquid droplets. We show that the conversion of acoustic nonlinearities into optical signals is possible with low-cost incoherent light sources such as light-emitting diodes, which would usher new classes of low-power photonic devices that are more affordable for remote communities and develo** nations, or where there are demanding requirements on size, weight and power.
△ Less
Submitted 14 November, 2018;
originally announced November 2018.
-
UV plasmonic properties of colloidal liquid-metal eutectic gallium-indium alloy nanoparticles
Authors:
Philipp Reineck,
Yiliang Lin,
Brant C. Gibson,
Michael D. Dickey,
Andrew D. Greentree,
Ivan S. Maksymov
Abstract:
Nanoparticles made of non-noble metals such as gallium have recently attracted significant attention due to promising applications in UV plasmonics. To date, experiments have mostly focused on solid and liquid pure gallium particles immobilized on solid substrates. However, for many applications, colloidal liquid-metal nanoparticle solutions are vital. Here, we experimentally demonstrate strong UV…
▽ More
Nanoparticles made of non-noble metals such as gallium have recently attracted significant attention due to promising applications in UV plasmonics. To date, experiments have mostly focused on solid and liquid pure gallium particles immobilized on solid substrates. However, for many applications, colloidal liquid-metal nanoparticle solutions are vital. Here, we experimentally demonstrate strong UV plasmonic resonances of eutectic gallium-indium (EGaIn) liquid-metal alloy nanoparticles suspended in ethanol. We rationalise experimental results through a theoretical model based on Mie theory. Our results contribute to the understanding of UV plasmon resonances in colloidal liquid-metal EGaIn nanoparticle suspensions. They will also enable further research into emerging applications of UV plasmonics in biomedical imaging, sensing, stretchable electronics, photoacoustics, and electrochemistry.
△ Less
Submitted 14 October, 2018;
originally announced October 2018.
-
Band structure and giant Stark effect in two-dimensional transition-metal dichalcogenides
Authors:
M. Javaid,
Salvy P. Russo,
K. Kalantar-Zadeh,
Andrew D. Greentree,
Daniel W. Drumm
Abstract:
We present a comprehensive study of the electronic structures of 192 configurations of 39 stable, layered, transition-metal dichalcogenides using density-functional theory. We show detailed investigations of their monolayer, bilayer, and trilayer structures' valence-band maxima, conduction-band minima, and band gap responses to transverse electric fields. We also report the critical fields where s…
▽ More
We present a comprehensive study of the electronic structures of 192 configurations of 39 stable, layered, transition-metal dichalcogenides using density-functional theory. We show detailed investigations of their monolayer, bilayer, and trilayer structures' valence-band maxima, conduction-band minima, and band gap responses to transverse electric fields. We also report the critical fields where semiconductor-to-metal phase transitions occur. Our results show that band gap engineering by applying electric fields can be an effective strategy to modulate the electronic properties of transition-metal dichalcogenides for next-generation device applications.
△ Less
Submitted 8 November, 2017;
originally announced November 2017.
-
Tuneable plasmonics enabled by capillary oscillations of liquid-metal nanodroplets
Authors:
Ivan S. Maksymov,
Andrew D. Greentree
Abstract:
Plasmonics allows manipulating light at the nanoscale, but has limitations due to the static nature of nanostructures and lack of tuneability. We propose and theoretically analyse a room-temperature liquid-metal nanodroplet that changes its shape, and therefore tunes the plasmon resonance frequency, due to capillary oscillations. We show the possibility to tune the capillary oscillation frequency…
▽ More
Plasmonics allows manipulating light at the nanoscale, but has limitations due to the static nature of nanostructures and lack of tuneability. We propose and theoretically analyse a room-temperature liquid-metal nanodroplet that changes its shape, and therefore tunes the plasmon resonance frequency, due to capillary oscillations. We show the possibility to tune the capillary oscillation frequency of the nanodroplet and to drive the oscillations electrically or mechanically. Employed as a tuneable nanoantenna, the nanodroplet may find applications in sensors, imaging, microscopy, and medicine.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
Nanodiamond arrays on glass for quantification and fluorescence characterisation
Authors:
Ashleigh H. Heffernan,
Andrew D. Greentree,
Brant C. Gibson
Abstract:
Quantifying the variation in emission properties of fluorescent nanodiamonds is important for develo** their wide-ranging applicability. Directed self-assembly techniques show promise for positioning nanodiamonds precisely enabling such quantification. Here we show an approach for depositing nanodiamonds in pre-determined arrays which are used to gather statistical information about fluorescent…
▽ More
Quantifying the variation in emission properties of fluorescent nanodiamonds is important for develo** their wide-ranging applicability. Directed self-assembly techniques show promise for positioning nanodiamonds precisely enabling such quantification. Here we show an approach for depositing nanodiamonds in pre-determined arrays which are used to gather statistical information about fluorescent lifetimes. The arrays were created via a layer of photoresist patterned with grids of apertures using electron beam lithography and then drop-cast with nanodiamonds. Electron microscopy revealed a 90% average deposition yield across 3,376 populated array sites, with an average of 20 nanodiamonds per site. Confocal microscopy, optimised for nitrogen vacancy fluorescence collection, revealed a broad distribution of fluorescent lifetimes in agreement with literature. This method for statistically quantifying fluorescent nanoparticles provides a step towards fabrication of hybrid photonic devices for applications from quantum cryptography to sensing.
△ Less
Submitted 10 May, 2017;
originally announced May 2017.
-
A study of size-dependent properties of MoS2 monolayer nanoflakes using density-functional theory
Authors:
M. Javaid,
Daniel W. Drumm,
Salvy P. Russo,
Andrew D. Greentree
Abstract:
Novel physical phenomena emerge in ultra-small sized nanomaterials. We study the limiting small-size-dependent properties of MoS$_{2}$ monolayer rhombic nanoflakes using density-functional theory on structures of size up to Mo$_{35}$S$_{70}$ (1.74~nm). We investigate the structural and electronic properties as functions of the lateral size of the nanoflakes, finding zigzag is the most stable edge…
▽ More
Novel physical phenomena emerge in ultra-small sized nanomaterials. We study the limiting small-size-dependent properties of MoS$_{2}$ monolayer rhombic nanoflakes using density-functional theory on structures of size up to Mo$_{35}$S$_{70}$ (1.74~nm). We investigate the structural and electronic properties as functions of the lateral size of the nanoflakes, finding zigzag is the most stable edge configuration, and that increasing size is accompanied by greater stability. We also investigate passivation of the structures to explore realistic settings, finding increased HOMO-LUMO gaps and energetic stability. Understanding the size-dependent properties will inform efforts to engineer electronic structures at the nano-scale.
△ Less
Submitted 4 May, 2017;
originally announced May 2017.
-
Microscopy as a statistical, Rényi-Ulam, half-lie game: a new heuristic search strategy to accelerate imaging
Authors:
Daniel W. Drumm,
Andrew D. Greentree
Abstract:
Finding a fluorescent target in a biological environment is a common and pressing microscopy problem. This task is formally analogous to the canonical search problem. In ideal (noise-free, truthful) search problems, the well-known binary search is optimal. The case of half-lies, where one of two responses to a search query may be deceptive, introduces a richer, Rényi-Ulam problem and is particular…
▽ More
Finding a fluorescent target in a biological environment is a common and pressing microscopy problem. This task is formally analogous to the canonical search problem. In ideal (noise-free, truthful) search problems, the well-known binary search is optimal. The case of half-lies, where one of two responses to a search query may be deceptive, introduces a richer, Rényi-Ulam problem and is particularly relevant to practical microscopy. We analyse microscopy in the contexts of Rényi-Ulam games and half-lies, develo** a new family of heuristics. We show the cost of insisting on verification by positive result in search algorithms; for the zero-half-lie case bisectioning with verification incurs a 50% penalty in the average number of queries required. The optimal partitioning of search spaces directly following verification in the presence of random half-lies is determined. Trisectioning with verification is shown to be the most efficient heuristic of the family in a majority of cases.
△ Less
Submitted 4 October, 2017; v1 submitted 19 April, 2017;
originally announced April 2017.
-
Optical Cryocooling of Diamond
Authors:
M. Kern,
J. Jeske,
D. M. W. Lau,
A. D. Greentree,
F. Jelezko,
J. Twamley
Abstract:
The cooling of solids by optical means only using anti-Stokes emission has a long history of research and achievements. Such cooling methods have many advantages ranging from no-moving parts or fluids through to operation in vacuum and may have applications to cryosurgery. However achieving large optical cryocooling powers has been difficult to achieve except in certain rare-earth crystals. Throug…
▽ More
The cooling of solids by optical means only using anti-Stokes emission has a long history of research and achievements. Such cooling methods have many advantages ranging from no-moving parts or fluids through to operation in vacuum and may have applications to cryosurgery. However achieving large optical cryocooling powers has been difficult to achieve except in certain rare-earth crystals. Through study of the emission and absorption cross sections we find that diamond, containing either NV or SiV (Nitrogen or Silicon vacancy), defects shows potential for optical cryocooling and in particular, NV do** shows promise for optical refrigeration. We study the optical cooling of doped diamond microcrystals ranging 10-250 microns in diameter trapped either in vacuum or in water. For the vacuum case we find NV-doped microdiamond optical cooling below room temperature could exceed 10 Kelvin, for irradiation powers of P< 100 mW. We predict that such temperature changes should be easily observed via large alterations in the diffusion constant for optically cryocooled microdiamonds trapped in water in an optical tweezer or via spectroscopic signatures such as the ZPL width or Raman line.
△ Less
Submitted 30 January, 2017;
originally announced January 2017.
-
Liquid-state acoustically-nonlinear nanoplasmonic source of optical frequency combs
Authors:
Ivan S. Maksymov,
Andrew D. Greentree
Abstract:
Nonlinear acoustic interactions in liquids are effectively stronger than nonlinear optical interactions in solids. Thus, harnessing these interactions will offer new possibilities in the design of ultra-compact nonlinear photonic devices. We theoretically demonstrate a hybrid, liquid-state and nanoplasmonic, source of optical frequency combs compatible with fibre-optic technology. This source reli…
▽ More
Nonlinear acoustic interactions in liquids are effectively stronger than nonlinear optical interactions in solids. Thus, harnessing these interactions will offer new possibilities in the design of ultra-compact nonlinear photonic devices. We theoretically demonstrate a hybrid, liquid-state and nanoplasmonic, source of optical frequency combs compatible with fibre-optic technology. This source relies on a nanoantenna to harness the strength of nonlinear acoustic effects and synthesise optical spectra from ultrasound.
△ Less
Submitted 14 November, 2016;
originally announced November 2016.
-
Acoustically tuneable optical transmission through a subwavelength hole with a bubble
Authors:
Ivan S. Maksymov,
Andrew D. Greentree
Abstract:
Efficient manipulation of light with sound in subwavelength-sized volumes is important for applications in photonics, phononics and biophysics, but remains elusive. We theoretically demonstrate the control of light with MHz-range ultrasound in a subwavelength, 300 nm wide water-filled hole with a 100 nm radius air bubble. Ultrasound-driven pulsations of the bubble modulate the effective refractive…
▽ More
Efficient manipulation of light with sound in subwavelength-sized volumes is important for applications in photonics, phononics and biophysics, but remains elusive. We theoretically demonstrate the control of light with MHz-range ultrasound in a subwavelength, 300 nm wide water-filled hole with a 100 nm radius air bubble. Ultrasound-driven pulsations of the bubble modulate the effective refractive index of the hole aperture, which gives rise to spectral tuning of light transmission through the hole. This control mechanism opens up novel opportunities for tuneable acousto-optic and optomechanical metamaterials, and all-optical ultrasound transduction.
△ Less
Submitted 15 October, 2016;
originally announced October 2016.
-
Digital Waveguide Adiabatic Passage Part 2: Experiment
Authors:
Vincent Ng,
Jesse A. Vaitkus,
Zachary J. Chaboyer,
Thach Nguyen,
Judith M. Dawes,
Michael J. Withford,
Andrew D. Greentree,
M. J. Steel
Abstract:
Using a femtosecond laser writing technique, we fabricate and characterise three-waveguide digital adiabatic passage devices, with the central waveguide digitised into five discrete waveguidelets. Strongly asymmetric behaviour was observed, devices operated with high fidelity in the counter-intuitive scheme while strongly suppressing transmission in the intuitive. The low differential loss of the…
▽ More
Using a femtosecond laser writing technique, we fabricate and characterise three-waveguide digital adiabatic passage devices, with the central waveguide digitised into five discrete waveguidelets. Strongly asymmetric behaviour was observed, devices operated with high fidelity in the counter-intuitive scheme while strongly suppressing transmission in the intuitive. The low differential loss of the digital adiabatic passage designs potentially offers additional functionality for adiabatic passage based devices. These devices operate with a high contrast ($>\!90\%$) over a 60nm bandwidth, centered at $\sim 823$nm.
△ Less
Submitted 11 September, 2016; v1 submitted 26 August, 2016;
originally announced August 2016.
-
Digital Waveguide Adiabatic Passage Part 1: Theory
Authors:
Jesse A. Vaitkus,
M. J. Steel,
Andrew D. Greentree
Abstract:
Spatial adiabatic passage represents a new way to design integrated photonic devices. In conventional adiabatic passage designs require smoothly varying waveguide separations. Here we show modelling of adiabatic passage devices where the waveguide separation is varied digitally. Despite digitisation, our designs show robustness against variations in the input wavelength and refractive index contra…
▽ More
Spatial adiabatic passage represents a new way to design integrated photonic devices. In conventional adiabatic passage designs require smoothly varying waveguide separations. Here we show modelling of adiabatic passage devices where the waveguide separation is varied digitally. Despite digitisation, our designs show robustness against variations in the input wavelength and refractive index contrast of the waveguides relative to the cladding. This approach to spatial adiabatic passage opens new design strategies and hence the potential for new photonics devices.
△ Less
Submitted 11 September, 2016; v1 submitted 26 August, 2016;
originally announced August 2016.
-
Stimulated emission from NV centres in diamond
Authors:
Jan Jeske,
Desmond W. M. Lau,
Liam P. McGuinness,
Philip Reineck,
Brett C. Johnson,
Jeffrey C. McCallum,
Fedor Jelezko,
Thomas Volz,
Jared H. Cole,
Brant C. Gibson,
Andrew D. Greentree
Abstract:
Stimulated emission is the process fundamental to laser operation, thereby producing coherent photon output. Despite negatively-charged nitrogen-vacancy (NV$^-$) centres being discussed as a potential laser medium since the 1980's, there have been no definitive observations of stimulated emission from ensembles of NV$^-$ to date. Reasons for this lack of demonstration include the short excited sta…
▽ More
Stimulated emission is the process fundamental to laser operation, thereby producing coherent photon output. Despite negatively-charged nitrogen-vacancy (NV$^-$) centres being discussed as a potential laser medium since the 1980's, there have been no definitive observations of stimulated emission from ensembles of NV$^-$ to date. Reasons for this lack of demonstration include the short excited state lifetime and the occurrence of photo-ionisation to the neutral charge state by light around the zero-phonon line. Here we show both theoretical and experimental evidence for stimulated emission from NV$^-$ states using light in the phonon-sidebands. Our system uses a continuous wave pump laser at 532 nm and a pulsed stimulating laser that is swept across the phononic sidebands of the NV$^-$. Optimal stimulated emission is demonstrated in the vicinity of the three-phonon line at 700 nm. Furthermore, we show the transition from stimulated emission to photoionisation as the stimulating laser wavelength is reduced from 700nm to 620 nm. While lasing at the zero-phonon line is suppressed by ionisation, our results open the possibility of diamond lasers based on NV centres, tuneable over the phonon-sideband. This broadens the applications of NV magnetometers from single centre nanoscale sensors to a new generation of ultra-precise ensemble laser sensors, which exploit the contrast and signal amplification of a lasing system.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Remote Nanodiamond Magnetometry
Authors:
Yinlan Ruan,
David A. Simpson,
Jan Jeske,
Heike Ebendorff-Heidepriem,
Desmond W. M. Lau,
Hong Ji,
Brett C. Johnson,
Takeshi Ohshima,
Shahraam Afshar V.,
Lloyd Hollenberg,
Andrew D. Greentree,
Tanya M. Monro,
Brant C. Gibson
Abstract:
Optical fibres have transformed the way people interact with the world and now permeate many areas of science. Optical fibres are traditionally thought of as insensitive to magnetic fields, however many application areas from mining to biomedicine would benefit from fibre-based remote magnetometry devices. In this work, we realise such a device by embedding nanoscale magnetic sensors into tellurit…
▽ More
Optical fibres have transformed the way people interact with the world and now permeate many areas of science. Optical fibres are traditionally thought of as insensitive to magnetic fields, however many application areas from mining to biomedicine would benefit from fibre-based remote magnetometry devices. In this work, we realise such a device by embedding nanoscale magnetic sensors into tellurite glass fibres. Remote magnetometry is performed on magnetically active defect centres in nanodiamonds embedded into the glass matrix. Standard optical magnetometry techniques are applied to initialize and detect local magnetic field changes with a measured sensitivity of 26 micron Tesla/square root(Hz). Our approach utilizes straight-forward optical excitation, simple focusing elements, and low power components. We demonstrate remote magnetometry by direct reporting of the magnetic ground states of nitrogen-vacancy defect centres in the optical fibres. In addition, we present and describe theoretically an all-optical technique that is ideally suited to remote fibre-based sensing. The implications of our results broaden the applications of optical fibres, which now have the potential to underpin a new generation of medical magneto-endoscopes and remote mining sensors.
△ Less
Submitted 21 February, 2016;
originally announced February 2016.
-
Detecting nonlinear acoustic waves in liquids with nonlinear dipole optical antennae
Authors:
Ivan S. Maksymov,
Andrew D. Greentree
Abstract:
Ultrasound is an important imaging modality for biological systems. High-frequency ultrasound can also (e.g., via acoustical nonlinearities) be used to provide deeply penetrating and high-resolution imaging of vascular structure via catheterisation. The latter is an important diagnostic in vascular health. Typically, ultrasound requires sources and transducers that are greater than, or of order th…
▽ More
Ultrasound is an important imaging modality for biological systems. High-frequency ultrasound can also (e.g., via acoustical nonlinearities) be used to provide deeply penetrating and high-resolution imaging of vascular structure via catheterisation. The latter is an important diagnostic in vascular health. Typically, ultrasound requires sources and transducers that are greater than, or of order the same size as the wavelength of the acoustic wave. Here we design and theoretically demonstrate that single silver nanorods, acting as optical nonlinear dipole antennae, can be used to detect ultrasound via Brillouin light scattering from linear and nonlinear acoustic waves propagating in bulk water. The nanorods are tuned to operate on high-order plasmon modes in contrast to the usual approach of using fundamental plasmon resonances. The high-order operation also gives rise to enhanced optical third-harmonic generation, which provides an important method for exciting the higher-order Fabry-Perot modes of the dipole antenna.
△ Less
Submitted 7 September, 2015; v1 submitted 27 August, 2015;
originally announced August 2015.
-
Nanodiamond in tellurite glass Part II: practical nanodiamond-doped fibers
Authors:
Yinlan Ruan,
Hong Ji,
Brett C. Johnson,
Takeshi Ohshima,
Andrew D. Greentree,
Brant C. Gibson,
Tanya M. Monro,
Heike Ebendorff-Heidepriem
Abstract:
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonics applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. The first part of this study reported the origin of loss in nanodiamond-doped glass and impact of glass…
▽ More
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonics applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. The first part of this study reported the origin of loss in nanodiamond-doped glass and impact of glass fabrication conditions. Here, we report the fabrication of nanodiamond-doped tellurite fibers with significantly reduced loss in the visible through further understanding of the impact of glass fabrication conditions on the interaction of the glass melt with the embedded nanodiamond. We fabricated tellurite fibers containing nanodiamond in concentrations up to 0.7 ppm-weight, while reducing the loss by more than an order of magnitude down to 10 dB/m at 600-800 nm.
△ Less
Submitted 5 November, 2014;
originally announced November 2014.
-
Nanodiamond in tellurite glass Part I: origin of loss in nanodiamond-doped glass
Authors:
Heike Ebendorff-Heidepriem,
Yinlan Ruan,
Hong Ji,
Andrew D. Greentree,
Brant C. Gibson,
Tanya M. Monro
Abstract:
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonic applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. In the first part of this study, we report the effect of interaction of the tellurite glass melt with the…
▽ More
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonic applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. In the first part of this study, we report the effect of interaction of the tellurite glass melt with the embedded nanodiamond on the loss of the glasses. The glass fabrication conditions such as melting temperature and concentration of NDs added to the melt were found to have critical influence on the interaction. Based on this understanding, we identified promising fabrication conditions for decreasing the loss to levels required for practical applications.
△ Less
Submitted 29 October, 2014;
originally announced October 2014.
-
Laser threshold magnetometry
Authors:
Jan Jeske,
Jared H. Cole,
Andrew D. Greentree
Abstract:
We propose a new type of sensor, which uses diamond containing the optically active nitrogen-vacancy (NV$^-$) centres as a laser medium. The magnetometer can be operated at room-temperature and generates light that can be readily fibre coupled, thereby permitting use in industrial applications and remote sensing. By combining laser pum** with a radio-frequency Rabi-drive field, an external magne…
▽ More
We propose a new type of sensor, which uses diamond containing the optically active nitrogen-vacancy (NV$^-$) centres as a laser medium. The magnetometer can be operated at room-temperature and generates light that can be readily fibre coupled, thereby permitting use in industrial applications and remote sensing. By combining laser pum** with a radio-frequency Rabi-drive field, an external magnetic field changes the fluorescence of the NV$^-$ centres. We use this change in fluorescence level to push the laser above threshold, turning it on with an intensity controlled by the external magnetic field, which provides a coherent amplification of the readout signal with very high contrast. This mechanism is qualitatively different from conventional NV$^-$--based magnetometers which use fluorescence measurements, based on incoherent photon emission. We term our approach laser threshold magnetometry (LTM). We predict that an NV$^-$--based laser threshold magnetometer with a volume of 1mm$^3$ can achieve shot-noise limited d.c.~sensitivity of 1.86 fT$/\sqrt{\rm{Hz}}$ and a.c.~sensitivity of 3.97fT$/\sqrt{\rm{Hz}}$.
△ Less
Submitted 8 January, 2016; v1 submitted 23 October, 2014;
originally announced October 2014.
-
Long-range coupling of silicon photonic waveguides using lateral leakage and adiabatic passage
Authors:
A. P. Hope,
T. G. Nguyen,
A. D. Greentree,
A. Mitchell
Abstract:
We present a new approach to long range coupling based on a combination of adiabatic passage and lateral leakage in thin shallow ridge waveguides on a silicon photonic platform. The approach enables transport of light between two isolated waveguides through a mode of the silicon slab that acts as an optical bus. Due to the nature of the adiabatic protocol, the bus mode has minimal population and t…
▽ More
We present a new approach to long range coupling based on a combination of adiabatic passage and lateral leakage in thin shallow ridge waveguides on a silicon photonic platform. The approach enables transport of light between two isolated waveguides through a mode of the silicon slab that acts as an optical bus. Due to the nature of the adiabatic protocol, the bus mode has minimal population and the transport is highly robust. We prove the concept and examine the robustness of this approach using rigorous modelling. We further demonstrate the utility of the approach by coupling power between two waveguides whilst bypassing an intermediate waveguide. This concept could form the basis of a new interconnect technology for silicon integrated photonic chips.
△ Less
Submitted 7 July, 2013;
originally announced July 2013.
-
Transformation optics for cavity array metamaterials
Authors:
James Q. Quach,
Chun-Hsu Su,
Andrew D. Greentree
Abstract:
Cavity array metamaterials (CAMs), composed of optical microcavities in a lattice coupled via tight-binding interactions, represent a novel architecture for engineering metamaterials. Since the size of the CAMs' constituent elements are commensurate with the operating wavelength of the device, it cannot directly utilise classical transformation optics in the same way as traditional metamaterials.…
▽ More
Cavity array metamaterials (CAMs), composed of optical microcavities in a lattice coupled via tight-binding interactions, represent a novel architecture for engineering metamaterials. Since the size of the CAMs' constituent elements are commensurate with the operating wavelength of the device, it cannot directly utilise classical transformation optics in the same way as traditional metamaterials. By directly transforming the internal geometry of the system, and locally tuning the permittivity between cavities, we provide an alternative framework suitable for tight-binding implementations of metamaterials. We develop a CAM-based cloak as the case study.
△ Less
Submitted 3 April, 2013;
originally announced April 2013.
-
Dynamic stabilization of the optical resonances of single nitrogen-vacancy centers in diamond
Authors:
V. M. Acosta,
C. Santori,
A. Faraon,
Z. Huang,
K. -M. C. Fu,
A. Stacey,
D. A. Simpson,
S. Tomljenovic-Hanic,
K. Ganesan,
A. D. Greentree,
S. Prawer,
R. G. Beausoleil
Abstract:
We report electrical tuning by the Stark effect of the excited-state structure of single nitrogen-vacancy (NV) centers located less than ~100 nm from the diamond surface. The zero-phonon line (ZPL) emission frequency is controllably varied over a range of 300 GHz. Using high-resolution emission spectroscopy, we observe electrical tuning of the strengths of both cycling and spin-altering transition…
▽ More
We report electrical tuning by the Stark effect of the excited-state structure of single nitrogen-vacancy (NV) centers located less than ~100 nm from the diamond surface. The zero-phonon line (ZPL) emission frequency is controllably varied over a range of 300 GHz. Using high-resolution emission spectroscopy, we observe electrical tuning of the strengths of both cycling and spin-altering transitions. Under resonant excitation, we apply dynamic feedback to stabilize the ZPL frequency. The transition is locked over several minutes and drifts of the peak position on timescales greater than ~100 ms are reduced to a fraction of the single-scan linewidth, with standard deviation as low as 16 MHz (obtained for an NV in bulk, ultra-pure diamond). These techniques should improve the entanglement success probability in quantum communications protocols.
△ Less
Submitted 3 April, 2012; v1 submitted 22 December, 2011;
originally announced December 2011.
-
Reconfigurable quantum metamaterials
Authors:
James Q. Quach,
Chun-Hsu Su,
Andrew M. Martin,
Andrew D. Greentree,
Lloyd C. L. Hollenberg
Abstract:
By coupling controllable quantum systems into larger structures we introduce the concept of a quantum metamaterial. Conventional meta-materials represent one of the most important frontiers in optical design, with applications in diverse fields ranging from medicine to aerospace. Up until now however, metamaterials have themselves been classical structures and interact only with the classical prop…
▽ More
By coupling controllable quantum systems into larger structures we introduce the concept of a quantum metamaterial. Conventional meta-materials represent one of the most important frontiers in optical design, with applications in diverse fields ranging from medicine to aerospace. Up until now however, metamaterials have themselves been classical structures and interact only with the classical properties of light. Here we describe a class of dynamic metamaterials, based on the quantum properties of coupled atom-cavity arrays, which are intrinsically lossless, reconfigurable, and operate fundamentally at the quantum level. We show how this new class of metamaterial could be used to create a reconfigurable quantum superlens possessing a negative index gradient for single photon imaging. With the inherent features of quantum superposition and entanglement of metamaterial properties, this new class of dynamic quantum metamaterial, opens a new vista for quantum science and technology.
△ Less
Submitted 4 June, 2011; v1 submitted 24 September, 2010;
originally announced September 2010.
-
Matterwave Transport Without Transit
Authors:
M. Rab,
J. H. Cole,
N. G. Parker,
A. D. Greentree,
L. C. L. Hollenberg,
A. M. Martin
Abstract:
Classically it is impossible to have transport without transit, i.e., if the points one, two and three lie sequentially along a path then an object moving from one to three must, at some point in time, be located at two. However, for a quantum particle in a three-well system it is possible to transport the particle between wells one and three such that the probability of finding it at any time i…
▽ More
Classically it is impossible to have transport without transit, i.e., if the points one, two and three lie sequentially along a path then an object moving from one to three must, at some point in time, be located at two. However, for a quantum particle in a three-well system it is possible to transport the particle between wells one and three such that the probability of finding it at any time in the classically accessible state in well two is negligible. We consider theoretically the analogous scenario for a Bose-Einstein condensate confined within a three well system. In particular, we predict the adiabatic transportation of an interacting Bose-Einstein condensate of 2000 Li atoms from well one to well three without transiting the allowed intermediate region. To an observer of this macroscopic quantum effect it would appear that, over a timescale of the order of one second, the condensate had transported, but not transited, a macroscopic distance of 20 microns between wells one and three.
△ Less
Submitted 6 September, 2007;
originally announced September 2007.