Showing 1–18 of 18 results for author: Grebel, H

Ultra-Short Pulse Looped Antennas

Authors: H. Grebel

Abstract: Modern optical systems send and receive ultra-short temporal pulses (USP). While ultra-broad band antennas do exist in the microwave region (e.g., log-periodic antennas, or, concentric loop antennas), their short temporal response is typically limited by the antenna's large dispersion, hence, resulting in a substantial pulse broadening. Here we show that loop antennas may exhibit USP attributes, b… ▽ More Modern optical systems send and receive ultra-short temporal pulses (USP). While ultra-broad band antennas do exist in the microwave region (e.g., log-periodic antennas, or, concentric loop antennas), their short temporal response is typically limited by the antenna's large dispersion, hence, resulting in a substantial pulse broadening. Here we show that loop antennas may exhibit USP attributes, below 400 ps (or, an equivalent coherent band pass exceeding 2.5 GHz) with only three loops, or, with a single, thick loop. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 8 pages 9 figures

Raman spectroscopy of active-carbon electrodes when Au colloids are placed at the electrolyte/electrode interface

Authors: H. Grebel, Y. Zhang

Abstract: We use surface enhanced Raman spectroscopy (SERS) in studying functionalized Au nanoparticles (AuNPs) when incorporated in active-carbon (A-C) based super-capacitor cells. We observe a resonance-like enhancement in the graphitic line (G-line) vs the D-line (defect line) of the A-C electrode. We also observed an enhancement in the specific capacitance of super-capacitor cell as a function of AuNPs… ▽ More We use surface enhanced Raman spectroscopy (SERS) in studying functionalized Au nanoparticles (AuNPs) when incorporated in active-carbon (A-C) based super-capacitor cells. We observe a resonance-like enhancement in the graphitic line (G-line) vs the D-line (defect line) of the A-C electrode. We also observed an enhancement in the specific capacitance of super-capacitor cell as a function of AuNPs concentration. All of these may be explained by the formation of a quasi-2D array of AuNPs at the interface between electrolyte and the electrode. △ Less

Submitted 14 September, 2023; v1 submitted 11 July, 2023; originally announced July 2023.

Comments: 14 pages; 10 figures

Active-carbon based supercapacitors with Au colloids: the case for placing the colloids at the electrolyte/electrode interface

Authors: H. Grebel, Shupei Yu, Yuanwei Zhang

Abstract: Supercapacitors (S-C) are short-term energy storage elements that find many applications, e.g., electronic charging devices and suppressors of power fluctuations in grids that are interfaced with sustainable sources. The capacitance of an ordinary capacitor increases when dispersing metallic colloids in its dielectric. A similar strategy for S-C means a deployment of nano-scale metal colloids (in… ▽ More Supercapacitors (S-C) are short-term energy storage elements that find many applications, e.g., electronic charging devices and suppressors of power fluctuations in grids that are interfaced with sustainable sources. The capacitance of an ordinary capacitor increases when dispersing metallic colloids in its dielectric. A similar strategy for S-C means a deployment of nano-scale metal colloids (in our case, Au nano particles, or AuNPs) at the very narrow interface between an electrolyte and the porous electrode (here, active-carbon film on a grafoil current collector). This is achieved by making the ligand that is coating the AuNPs negatively charged. We demonstrated a very large specific capacitance increase with a minute addition of functionalized AuNPs to the slurry. For example, C-V data at a scan rate of 20 mV/s indicated a specific capacitance amplification by a factor of 10 when 30 micro-g of AuNPs were incorporated with 200 mg of active carbon while using a 1 M Na2SO4 electrolyte and a 5% cellulose acetate butyrate as a binder. We make the case that the adhesion of the AuNPs to the surface of the electrode was strong: upon replacing the electrolyte, from 1 M Na2SO4 to 1 M KOH and retaining the same set of electrodes, the enhancement capacitance factor decreased as compared to 1 M Na2SO4 electrolyte but remained large, ~3, as determined by C-V traces at the same scan rate of 20 mV/s. △ Less

Submitted 22 September, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: 19 pages; 16 figures

Optically Controlled Supercapacitors with Semiconductor Embedded Active Carbon Electrodes

Authors: H. Grebel

Abstract: Supercapacitors, S-C - capacitors that take advantage of the large capacitance at the interface between an electrode and an electrolyte - have found many short-term energy applications. We concentrate here on optically induced, electrical and thermal effects. The parallel plate cells were made of two transparent electrodes (ITO), each covered with semiconductor-embedded, active carbon (A-C) layer.… ▽ More Supercapacitors, S-C - capacitors that take advantage of the large capacitance at the interface between an electrode and an electrolyte - have found many short-term energy applications. We concentrate here on optically induced, electrical and thermal effects. The parallel plate cells were made of two transparent electrodes (ITO), each covered with semiconductor-embedded, active carbon (A-C) layer. While A-C appears black, it is not an ideal blackbody absorber that absorbs all spectral light indiscriminately. In addition to relatively flat optical absorption background, A-C exhibits two distinct absorption bands: in the near-IR and in the blue. The first may be attributed to absorption by OH- group and the latter, by scattering, possibly by surface plasmons. Here, optical and thermal effects of sub-micron size SiC particles that are embedded in A-C electrode, are presented. Similarly to nano-Si particles, SiC exhibits blue band absorption, but it is less likely to oxidize. Using Charge-Discharge (CD) experiments, the relative optically related capacitance increase may be as large as ~34% (68% when the illuminated area is taken into account). Capacitance increase was noted as the illuminated samples became hotter. This thermal effect amounts to 20% of the overall relative change using CD experiments. The thermal effect was quite large when the SiC particles were replaced by CdSe/ZnS quatum dots; for the latter, the thermal effect was 35% compared with 10% for the optical effect. When analyzing the optical effect one may consider two processes: ionization of the semiconductor particles and charge displacement under the cell's terminals - a dipole effect. Our model suggests that the capacitance increase is related to an optically induced dipole. △ Less

Submitted 28 March, 2021; originally announced March 2021.

Comments: 12 pages; 7 pictures

Asymmetric supercapacitors: optical and thermal effects when active carbon electrodes are embedded with nano-scale semiconductor dots

Authors: H. Grebel

Abstract: Optical and thermal effects in asymmetric supercapacitors, whose active-carbon (AC) electrodes were embedded with nano-Si (n-Si) quantum dots (QD), are reported. We describe two structures: (1) p-n like, obtained by using a polyethylimine (PEI) binder for the n-like electrode and a polyvinylpyrrolidone (PVP) binder for the p-like electrode; (2) a single component binder, poly(methyl methacrylate)… ▽ More Optical and thermal effects in asymmetric supercapacitors, whose active-carbon (AC) electrodes were embedded with nano-Si (n-Si) quantum dots (QD), are reported. We describe two structures: (1) p-n like, obtained by using a polyethylimine (PEI) binder for the n-like electrode and a polyvinylpyrrolidone (PVP) binder for the p-like electrode; (2) a single component binder, poly(methyl methacrylate) (PMMA). In general, AC appears black to the naked eye and one may assume that it acts as a black body absorber, namely, indiscriminately absorbing all light spectra. Yet, on top of a flat lossy spectra, AC (from two manufacturers) exhibited two distinct absorption bands: one in the blue (~ 400 nm) and the other one in the near IR (~ 840 nm). The n-Si material accentuated the absorption in the blue and bleached the IR absorption. Both bands contributed to capacitance increase: (a) when using aqueous solution and a PMMA binder, the optical related increased capacitance was 20% at low n-Si concentration and more than 100% for a high concentration dose; (b) when using IL electrolyte, the large, thermal capacitance increase (of ca 40%) was comparable to the optical effect (of ca 42%) and hence was assigned as an optically-induced thermal effect. The experimental data point to an optically induced capacitance increase even in the absence of the n-Si dots; this could be attributed to the absorption of AC in the blue. △ Less

Submitted 15 December, 2020; originally announced December 2020.

Comments: 14 pages, 9 figures

Optical cages made of graphitic frameworks

Authors: J. P. Walker, H. Grebel

Abstract: In pursuit of infrared (IR) radiation absorbers, we examine quasicrystal structures made of graphite wires. An array of graphitic cages and cage-within-cage, and whose overall dimensions is smaller than the radiation wavelength exhibit a flat absorption spectrum, A~0.83 between 10-30 microns and a quality loss factor of L~0.83 (L=A/Q, with Q, the quality factor). Simulations at microwave frequenci… ▽ More In pursuit of infrared (IR) radiation absorbers, we examine quasicrystal structures made of graphite wires. An array of graphitic cages and cage-within-cage, and whose overall dimensions is smaller than the radiation wavelength exhibit a flat absorption spectrum, A~0.83 between 10-30 microns and a quality loss factor of L~0.83 (L=A/Q, with Q, the quality factor). Simulations at microwave frequencies show multiple absorption lines. In the case of a cage within cage, energy is funneled towards the inner cage which result in a rather hot structure. Applications are envisioned as anti-fogging surfaces, EM shields and energy harvesting. △ Less

Submitted 2 July, 2020; v1 submitted 19 July, 2019; originally announced July 2019.

Comments: 7 pages 5 figures

Parametric Oscillation and amplification with gate controlled capacitor-within-capacitor

Authors: H. Grebel

Abstract: A Capacitor-within-Capacitor (CWC) is a nested electronic element that has two components: the cell (e.g., the outer capacitor) and the gate (e.g., the inner capacitor). The designations for the gate and cell may be interchanged. Here, an analysis and experimentation on a diode-interfaced parametric oscillations and amplification are described. By replacing the diode with a junction, made of doped… ▽ More A Capacitor-within-Capacitor (CWC) is a nested electronic element that has two components: the cell (e.g., the outer capacitor) and the gate (e.g., the inner capacitor). The designations for the gate and cell may be interchanged. Here, an analysis and experimentation on a diode-interfaced parametric oscillations and amplification are described. By replacing the diode with a junction, made of doped nano-graphene films, we demonstrated a new structure whose do** may be electronically and chemically controlled. △ Less

Submitted 27 July, 2020; v1 submitted 19 July, 2019; originally announced July 2019.

Comments: 12 pages, 11 figures

Ion-liquid based super-capacitors with inner gate diode-like separators

Authors: Tazima S. Chowdhury, Haim Grebel

Abstract: We demonstrate that the capacitance of ionic-liquid filled supercapacitors is substantially increased by placing a diode-like structure on the separator membrane. We call the structured separator: gate, and demonstrate that the order of a p-n layout with respect to the auxiliary electrode affects the overall cell's capacitance. The smallest ESR and the largest capacitance values are noted when the… ▽ More We demonstrate that the capacitance of ionic-liquid filled supercapacitors is substantially increased by placing a diode-like structure on the separator membrane. We call the structured separator: gate, and demonstrate that the order of a p-n layout with respect to the auxiliary electrode affects the overall cell's capacitance. The smallest ESR and the largest capacitance values are noted when the p-side is facing the auxiliary electrode. △ Less

Submitted 9 January, 2019; originally announced February 2019.

Comments: 11 pages, 8 figures

Journal ref: ChemEngineering 2019, 3(2), 39

Optical Cages

Authors: V. Kumar, J. P. Walker, H. Grebel

Abstract: We examine array of metal-mesh frameworks for their wide-band absorption. These take the form of quasi-crystal optical cages. An array of cages tends to focus the incoming radiation within each framework. An array of cage-within-cage funnels the radiation from the outer cage to its inner core even further. We examine array of metal-mesh frameworks for their wide-band absorption. These take the form of quasi-crystal optical cages. An array of cages tends to focus the incoming radiation within each framework. An array of cage-within-cage funnels the radiation from the outer cage to its inner core even further. △ Less

Submitted 6 December, 2018; v1 submitted 16 July, 2018; originally announced July 2018.

Comments: 11 pages; 6 figures

Transfer of Graphene with Protective Oxide Layers

Authors: H. Grebel, L. Stan, A. V. Sumant, Y. Liu, D. Gosztola, L. Ocola, B. Fisher

Abstract: Transfer of graphene, grown by Chemical Vapor Deposition (CVD), to a substrate of choice, typically involves deposition of a polymeric layer (typically, poly(methyl methacrylate, PMMA or polydimethylsiloxane, PDMS). These polymers are quite hard to remove without leaving some residues behind. Here we study a transfer of graphene with a protective thin oxide layer. The thin oxide layer is grown by… ▽ More Transfer of graphene, grown by Chemical Vapor Deposition (CVD), to a substrate of choice, typically involves deposition of a polymeric layer (typically, poly(methyl methacrylate, PMMA or polydimethylsiloxane, PDMS). These polymers are quite hard to remove without leaving some residues behind. Here we study a transfer of graphene with a protective thin oxide layer. The thin oxide layer is grown by Atomic Deposition Layer (ALD) on the graphene right after the growth stage on Cu foils. One can further aid the oxide-graphene transfer by depositing a very thin polymer layer on top of the composite (much thinner than the usual thickness) following by a more aggressive polymeric removal methods, thus leaving the graphene intact. We report on the nucleation growth process of alumina and hafnia films on the graphene, their resulting strain and on their optical transmission. We suggest that hafnia is a better oxide to coat the graphene than alumina in terms of uniformity and defects. △ Less

Submitted 8 June, 2018; v1 submitted 22 January, 2018; originally announced January 2018.

Comments: 13 pgs, 13 figures

Journal ref: ChemEngineering 2018, 2(4), 5

Life-time and line-width of individual quantum dots interfaced with graphene

Authors: Xin Miao, David J. Gosztola, Anirudha V. Sumant, Haim Grebel

Abstract: We report on the luminescence's life-time and line-width from an array of individual quantum dots; these were interfaced with graphene surface guides or dispersed on a metal film. Our results are consistent with screening by charge carriers. Fluorescence quenching is typically mentioned as a sign that chromophores are interfacing a conductive surface; we found that QD interfaced with conductive la… ▽ More We report on the luminescence's life-time and line-width from an array of individual quantum dots; these were interfaced with graphene surface guides or dispersed on a metal film. Our results are consistent with screening by charge carriers. Fluorescence quenching is typically mentioned as a sign that chromophores are interfacing a conductive surface; we found that QD interfaced with conductive layers exhibited shorter life-time and line-broadening but not necessarily fluorescence quenching as the latter may be impacted by molecular concentration, reflectivity and conductor imperfections. We also comment on selective life-time measurements, which, we postulate depend on the specifics of the local density-of-states involved. △ Less

Submitted 26 December, 2017; originally announced December 2017.

Comments: 15 pgs, 6 figures

Capacitor-within-Capacitor

Authors: Haim Grebel

Abstract: Capacitors are typically connected together in one of two configurations: either in series, or in parallel. Here we study a capacitor-within-capacitor (CWC). Simulations and experiments indicate that the overall capacitance of the structured cell may be made larger than an ordinary two-plate counterpart by at least 50%. Simulations also indicate that the cell's capacitance may be controlled by the… ▽ More Capacitors are typically connected together in one of two configurations: either in series, or in parallel. Here we study a capacitor-within-capacitor (CWC). Simulations and experiments indicate that the overall capacitance of the structured cell may be made larger than an ordinary two-plate counterpart by at least 50%. Simulations also indicate that the cell's capacitance may be controlled by the gate voltage. Overall, this concept is deemed suitable for microfluidic sensing and possibly for energy storage elements. △ Less

Submitted 29 May, 2018; v1 submitted 11 December, 2017; originally announced December 2017.

Comments: 13 pages,13 figures, 1 table

Journal ref: Appl. Sci. (2019) 1: 48

Logic Gates with Ion Transistors

Authors: Haim Grebel

Abstract: Electronic logic gates are the basic building blocks of every computing and micro controlling system. Logic gates are made of switches, such as diodes and transistors. Ion-selective, ionic switches may emulate electronic switches [1-8]. If we ever want to create artificial bio-chemical circuitry, then we need to move a step further towards ion-logic circuitry. Here we demonstrate ion XOR and OR ga… ▽ More Electronic logic gates are the basic building blocks of every computing and micro controlling system. Logic gates are made of switches, such as diodes and transistors. Ion-selective, ionic switches may emulate electronic switches [1-8]. If we ever want to create artificial bio-chemical circuitry, then we need to move a step further towards ion-logic circuitry. Here we demonstrate ion XOR and OR gates with electrochemical cells, and specifically, with two wet-cell batteries. In parallel to vacuum tubes, the batteries were modified to include a third, permeable and conductive mid electrode (the gate), which was placed between the anode and cathode in order to affect the ion flow through it. The key is to control the cell output with a much smaller biasing power, as demonstrated here. A successful demonstration points to self-powered ion logic gates. △ Less

Submitted 15 November, 2016; originally announced November 2016.

Comments: 13 pages; 6 figures

Electrically tuned super-capacitors

Authors: Tazima S. Chowdhury, Haim Grebel

Abstract: We show how to increase the capacitance of super-capacitors by modifying the otherwise passive separator layer and turn it into an active diode-like structure. We demonstrate 15% capacitance increase for a diode-like separators without a bias. Additional 15% capacitance increase has been observed for biased separators. We show how to increase the capacitance of super-capacitors by modifying the otherwise passive separator layer and turn it into an active diode-like structure. We demonstrate 15% capacitance increase for a diode-like separators without a bias. Additional 15% capacitance increase has been observed for biased separators. △ Less

Submitted 18 August, 2018; v1 submitted 25 December, 2015; originally announced December 2015.

Comments: 15 pages, 12 figures

Electrochemical Cells with Intermediate Capacitor Elements

Authors: Haim Grebel, Akshat Patel

Abstract: Our goal is to electronically regulate electrochemical cells. For this, we introduced a third element, called the gate, which was placed between the cathode and the anode electrodes of the cell. Voltage applied to this element controlled the local potential of the electrolyte, thus impacting the flow of ions within the cell. The flow of ions was monitored by the electronic current in the external… ▽ More Our goal is to electronically regulate electrochemical cells. For this, we introduced a third element, called the gate, which was placed between the cathode and the anode electrodes of the cell. Voltage applied to this element controlled the local potential of the electrolyte, thus impacting the flow of ions within the cell. The flow of ions was monitored by the electronic current in the external cell's circuit. We provide simulations and experimental data as proof to the validity of this concept. This is but the first step towards a demonstration of a two-dimensional, bi-carrier ion transistors. △ Less

Submitted 25 August, 2015; originally announced August 2015.

Comments: 11 pages 4 figures

Raman signal-enhancement and broadening with graphene-coated diamond-shape nano-antennas

Authors: Charilaos Paraskevaidis, Tevye Kuykendall, Mauro Melli, Alexander Weber-Bargioni, P. James Schuck, Adam Schwartzberg, Scott Dhuey, Stefano Cabrini, Haim Grebel

Abstract: We used broad-band diamond-shape antennas, whose bandwidth could cover the frequency range between the pump laser and the scattered modes, in conjunction with uniformly deposited graphene test films. We used broad-band diamond-shape antennas, whose bandwidth could cover the frequency range between the pump laser and the scattered modes, in conjunction with uniformly deposited graphene test films. △ Less

Submitted 30 September, 2013; originally announced October 2013.

Comments: 33 pages, 12 figures

Negative differential resistance with graphene channels, interfacing distributed quantum dots in Field-Effect Transistors

Authors: Samarth Trivedi, Haim Grebel

Abstract: Field effect transistors with channels made of graphene layer(s) were explored. The graphene layer(s) contacted a distributed array of well-separated semiconductor quantum dots (QDs). The dots were embedded in nano-structured hole-array; each filled hole was occupied by one dot. Differential optical and electrical conductance was observed. Since Negative Differential Resistance (NDR) is key to hig… ▽ More Field effect transistors with channels made of graphene layer(s) were explored. The graphene layer(s) contacted a distributed array of well-separated semiconductor quantum dots (QDs). The dots were embedded in nano-structured hole-array; each filled hole was occupied by one dot. Differential optical and electrical conductance was observed. Since Negative Differential Resistance (NDR) is key to high-speed elements, such construction may open the door for new electro-photonic devices. △ Less

Submitted 25 July, 2013; originally announced July 2013.

Comments: 12 pages, 4 figures

Nonlinear behavior of vibrating molecules on suspended graphene waveguides

Authors: Amrita Banerjee, Haim Grebel

Abstract: Suspended graphene waveguides were deposited on micron-scale periodic metal (plasmonic) structures. Raman scattering of test molecules (B. Megaterium), deposited on the waveguides' surface, exhibited azimuthal cycles upon rotation: at these micron scales, spontaneous Raman ought to be independent of phase matching conditions. In addition, we observed angular-selective quadratic intensity dependenc… ▽ More Suspended graphene waveguides were deposited on micron-scale periodic metal (plasmonic) structures. Raman scattering of test molecules (B. Megaterium), deposited on the waveguides' surface, exhibited azimuthal cycles upon rotation: at these micron scales, spontaneous Raman ought to be independent of phase matching conditions. In addition, we observed angular-selective quadratic intensity dependence contrary to the typical linear behavior of spontaneous Raman. The effects were observed at very modest pump laser intensities (<10 MW/cm2 at the sample surface, oftenly used in Raman experiments). We attributed these observations to nonlinear coupling between the vibrating molecules and surface plasmon polariton (SPP) modes at the molecular vibration frequency. It was assessed that the polariton mode propagates through fairly long distances (over 100 microns). △ Less

Submitted 18 June, 2012; originally announced June 2012.

Comments: 18 pages; 3 figures; a journal paper