-
An all-dielectric metasurface polarimeter
Authors:
Yash D. Shah,
Adetunmise C. Dada,
James P. Grant,
David R. S. Cumming,
Charles Altuzarra,
Thomas S. Nowack,
Ashley Lyons,
Matteo Clerici,
Daniele Faccio
Abstract:
The polarization state of light is a key parameter in many imaging systems. For example, it can image mechanical stress and other physical properties that are not seen with conventional imaging, and can also play a central role in quantum sensing. However, polarization is more difficult to image and polarimetry typically involves several independent measurements with moving parts in the measuremen…
▽ More
The polarization state of light is a key parameter in many imaging systems. For example, it can image mechanical stress and other physical properties that are not seen with conventional imaging, and can also play a central role in quantum sensing. However, polarization is more difficult to image and polarimetry typically involves several independent measurements with moving parts in the measurement device. Metasurfaces with interleaved designs have demonstrated sensitivity to either linear or circular/elliptical polarization states. Here we present an all-dielectric meta-polarimeter for direct measurement of any arbitrary polarization states from a single unit-cell design. By engineering a completely asymmetric design, we obtained a metasurface that can excite eigenmodes of the nanoresonators, thus displaying a unique diffraction pattern for not only any linear polarization state but all elliptical polarization states (and handedness) as well. The unique diffraction patterns are quantified into Stokes parameters with a resolution of 5$^{\circ}$ and with a polarization state fidelity of up to $99\pm1$%. This holds promise for applications in polarization imaging and quantum state tomography.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
A spatio-temporal LSTM model to forecast across multiple temporal and spatial scales
Authors:
Yihao Hu,
Fearghal O'Donncha,
Paulito Palmes,
Meredith Burke,
Ramon Filgueira,
Jon Grant
Abstract:
This paper presents a novel spatio-temporal LSTM (SPATIAL) architecture for time series forecasting applied to environmental datasets. The framework was evaluated across multiple sensors and for three different oceanic variables: current speed, temperature, and dissolved oxygen. Network implementation proceeded in two directions that are nominally separated but connected as part of a natural envir…
▽ More
This paper presents a novel spatio-temporal LSTM (SPATIAL) architecture for time series forecasting applied to environmental datasets. The framework was evaluated across multiple sensors and for three different oceanic variables: current speed, temperature, and dissolved oxygen. Network implementation proceeded in two directions that are nominally separated but connected as part of a natural environmental system -- across the spatial (between individual sensors) and temporal components of the sensor data. Data from four sensors sampling current speed, and eight measuring both temperature and dissolved oxygen evaluated the framework. Results were compared against RF and XGB baseline models that learned on the temporal signal of each sensor independently by extracting the date-time features together with the past history of data using sliding window matrix. Results demonstrated ability to accurately replicate complex signals and provide comparable performance to state-of-the-art benchmarks. Notably, the novel framework provided a simpler pre-processing and training pipeline that handles missing values via a simple masking layer. Enabling learning across the spatial and temporal directions, this paper addresses two fundamental challenges of ML applications to environmental science: 1) data sparsity and the challenges and costs of collecting measurements of environmental conditions such as ocean dynamics, and 2) environmental datasets are inherently connected in the spatial and temporal directions while classical ML approaches only consider one of these directions. Furthermore, sharing of parameters across all input steps makes SPATIAL a fast, scalable, and easily-parameterized forecasting framework.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
A GPU-accelerated mixed-precision WENO method for extremal black hole and gravitational wave physics computations
Authors:
Scott E. Field,
Sigal Gottlieb,
Zachary J. Grant,
Leah F. Isherwood,
Gaurav Khanna
Abstract:
We develop and use a novel mixed-precision weighted essentially non-oscillatory (WENO) method for solving the Teukolsky equation, which arises when modeling perturbations of Kerr black holes. We show that WENO methods outperform higher-order finite-difference methods, standard in the discretization of the Teukolsky equation, due to the need to add dissipation for stability purposes in the latter.…
▽ More
We develop and use a novel mixed-precision weighted essentially non-oscillatory (WENO) method for solving the Teukolsky equation, which arises when modeling perturbations of Kerr black holes. We show that WENO methods outperform higher-order finite-difference methods, standard in the discretization of the Teukolsky equation, due to the need to add dissipation for stability purposes in the latter. In particular, as the WENO scheme uses no additional dissipation it is well-suited for scenarios requiring long-time evolution such as the study of Price tails and gravitational wave emission from extreme mass ratio binaries. In the mixed-precision approach, the expensive computation of the WENO weights is performed in reduced floating-point precision that results in a significant speedup factor of 3.3. In addition, we use state-of-the-art Nvidia general-purpose graphics processing units and cluster parallelism to further accelerate the WENO computations. Our optimized WENO solver can be used to quickly generate accurate results of significance in the field of black hole and gravitational wave physics. We apply our solver to study the behavior of the Aretakis charge -- a conserved quantity, that if detected by a gravitational wave observatory like LIGO/Virgo would prove the existence of extremal black holes.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Electrically injected GeSn lasers with peak wavelength up to 2.7 micrometer at 90 K
Authors:
Yiyin Zhou,
Solomon Ojo,
Yuanhao Miao,
Huong Tran,
Joshua M. Grant,
Grey Abernathy,
Sylvester Amoah,
Jake Bass,
Gregory Salamo,
Wei Du,
Jifeng Liu,
Joe Margetis,
John Tolle,
Yong-Hang Zhang,
Greg Sun,
Richard A. Soref,
Baohua Li,
Shui-Qing Yu
Abstract:
GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just begun only recently. In this work, we present explorative investigations of electrically injected GeSn heterostructure lasers with various layer thicknesses an…
▽ More
GeSn lasers enable monolithic integration of lasers on the Si platform using all-group-IV direct-bandgap materials. Although optically pumped GeSn lasers have made significant progress, the study of the electrically injected lasers has just begun only recently. In this work, we present explorative investigations of electrically injected GeSn heterostructure lasers with various layer thicknesses and material compositions. The cap layer total thickness was varied between 240 and 100 nm. At 10 K, a 240-nm-SiGeSn capped device had a threshold current density Jth = 0.6 kA/cm2 compared to Jth = 1.4 kA/cm2 of a device with 100-nm-SiGeSn cap due to an improved modal overlap with the GeSn gain region. Both devices had a maximum operating temperature Tmax = 100 K. Device with cap layers of Si0.03Ge0.89Sn0.08 and Ge0.95Sn0.05, respectively, were also compared. Due to less effective carrier (electron) confinement, the device with a 240-nm-GeSn cap had a higher threshold Jth = 2.4 kA/cm2 and lower maximum operating temperature Tmax = 90 K, compared to those of the 240-nm-SiGeSn capped device with Jth = 0.6 kA/cm2 and Tmax = 100 K. In the study of the active region material, the device with Ge0.85Sn0.15 active region had a 2.3 times higher Jth and 10 K lower Tmax, compared to the device with Ge0.89Sn0.11 in its active region. This is likely due to higher defect density in Ge0.85Sn0.15 rather than an intrinsic issue. The longest lasing wavelength was measured as 2682 nm at 90 K. The investigations provide guidance to the future structure design of GeSn laser diodes to further improve the performance.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Parallel Performance of ARM ThunderX2 for Atomistic Simulation Algorithms
Authors:
William Robert Saunders,
James Grant,
Eike Hermann Müller
Abstract:
Atomistic simulation drives scientific advances in modern material science and accounts for a significant proportion of wall time on High Performance Computing facilities. It is important that algorithms are efficient and implementations are performant in a continuously diversifying hardware landscape. Furthermore, they have to be portable to make best use of the available computing resource.
In…
▽ More
Atomistic simulation drives scientific advances in modern material science and accounts for a significant proportion of wall time on High Performance Computing facilities. It is important that algorithms are efficient and implementations are performant in a continuously diversifying hardware landscape. Furthermore, they have to be portable to make best use of the available computing resource.
In this paper we assess the parallel performance of some key algorithms implemented in a performance portable framework developed by us. We consider Molecular Dynamics with short range interactions, the Fast Multipole Method and Kinetic Monte Carlo. To assess the performance of emerging architectures, we compare the Marvell ThunderX2 (ARM) architecture to traditional x86_64 hardware made available through the Azure cloud computing service.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
A new algorithm for electrostatic interactions in Monte Carlo simulations of charged particles
Authors:
William Robert Saunders,
James Grant,
Eike Hermann Müller
Abstract:
To minimise systematic errors in Monte Carlo simulations of charged particles, long range electrostatic interactions have to be calculated accurately and efficiently. Standard approaches, such as Ewald summation or the naive application of the classical Fast Multipole Method, result in a cost per Metropolis-Hastings step which grows in proportion to some positive power of the number of particles…
▽ More
To minimise systematic errors in Monte Carlo simulations of charged particles, long range electrostatic interactions have to be calculated accurately and efficiently. Standard approaches, such as Ewald summation or the naive application of the classical Fast Multipole Method, result in a cost per Metropolis-Hastings step which grows in proportion to some positive power of the number of particles $N$ in the system. This prohibitively large cost prevents accurate simulations of systems with a sizeable number of particles. Currently, large systems are often simulated by truncating the Coulomb potential which introduces uncontrollable systematic errors. In this paper we present a new multilevel method which reduces the computational complexity to $\mathcal{O}(\log(N))$ per Metropolis-Hastings step, while maintaining errors which are comparable to direct Ewald summation. We show that compared to related previous work, our approach reduces the overall cost by better balancing time spent in the proposal- and acceptance- stages of each Metropolis-Hastings step. By simulating large systems with up to $N=10^5$ particles we demonstrate that our implementation is competitive with state-of-the-art MC packages and allows the simulation of very large systems of charged particles with accurate electrostatics.
△ Less
Submitted 4 January, 2021; v1 submitted 30 June, 2020;
originally announced June 2020.
-
Electrically injected GeSn lasers on Si operating up to 100 K
Authors:
Yiyin Zhou,
Yuanhao Miao,
Solomon Ojo,
Huong Tran,
Grey Abernathy,
Joshua M. Grant,
Sylvester Amoah,
Gregory Salamo,
Wei Du,
Jifeng Liu,
Joe Margetis,
John Tolle,
Yong-Hang Zhang,
Greg Sun,
Richard A. Soref,
Baohua Li,
Shui-Qing Yu
Abstract:
The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers through electrical injection have not been experimentally achieved yet. In this work, we report the first demonstration of electrically injected GeSn lasers on Si.…
▽ More
The significant progress of GeSn material development has enabled a feasible solution to the long-desired monolithically integrated lasers on the Si platform. While there are many reports focused on optically pumped lasers, GeSn lasers through electrical injection have not been experimentally achieved yet. In this work, we report the first demonstration of electrically injected GeSn lasers on Si. A GeSn/SiGeSn heterostructure diode grown on a Si substrate was fabricated into ridge waveguide laser devices and tested under pulsed conditions. Special considerations were given for the structure design to ensure effective carrier confinement and optical confinement that lead to lasing. Lasing was observed at temperatures from 10 to 100 K with emission peaks at around 2300 nm. The minimum threshold of 598 A/cm2 was recorded at 10 K and the threshold increased to 842 A/cm2 at 77 K. The spectral linewidth of a single peak was measured as small as 0.13 nm (0.06 meV). The maximum characteristic temperature was extracted as 99 K over the temperature range of 10-77 K.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Si-based GeSn photodetectors towards mid-infrared imaging applications
Authors:
Huong Tran,
Thach Pham,
Joe Margetis,
Yiyin Zhou,
Wei Dou,
Perry C. Grant,
Joshua M. Grant,
Sattar Alkabi,
Greg Sun,
Richard A. Soref,
John Tolle,
Yong-Hang Zhang,
Wei Du,
Baohua Li,
Mansour Mortazavi,
Shui-Qing Yu
Abstract:
This paper reports a comprehensive study of Si-based GeSn mid-infrared photodetectors, which includes: 1) the demonstration of a set of photoconductors with Sn compositions ranging from 10.5% to 22.3%, showing the cut-off wavelength has been extended to 3.65 um. The measured maximum D* of 1.1x10^10 cmHz^(1/2)W(-1) is comparable to that of commercial extended-InGaAs detectors; 2) the development of…
▽ More
This paper reports a comprehensive study of Si-based GeSn mid-infrared photodetectors, which includes: 1) the demonstration of a set of photoconductors with Sn compositions ranging from 10.5% to 22.3%, showing the cut-off wavelength has been extended to 3.65 um. The measured maximum D* of 1.1x10^10 cmHz^(1/2)W(-1) is comparable to that of commercial extended-InGaAs detectors; 2) the development of surface passivation technique on photodiode based on in-depth analysis of dark current mechanism, effectively reducing the dark current. Moreover, mid-infrared images were obtained using GeSn photodetectors, showing the comparable image quality with that acquired by using commercial PbSe detectors.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Fast electrostatic solvers for kinetic Monte Carlo simulations
Authors:
William Robert Saunders,
James Grant,
Eike Hermann Müller,
Ian Thompson
Abstract:
Kinetic Monte Carlo (KMC) is an important computational tool in physics and chemistry. In contrast to standard Monte Carlo, KMC permits the description of time dependent dynamical processes and is not restricted to systems in equilibrium. Recently KMC has been applied successfully in modelling of novel energy materials such as Lithium-ion batteries and solar cells. We consider general solid state…
▽ More
Kinetic Monte Carlo (KMC) is an important computational tool in physics and chemistry. In contrast to standard Monte Carlo, KMC permits the description of time dependent dynamical processes and is not restricted to systems in equilibrium. Recently KMC has been applied successfully in modelling of novel energy materials such as Lithium-ion batteries and solar cells. We consider general solid state systems which contain free, interacting particles which can hop between localised sites in the material. The KMC transition rates for those hops depend on the change in total potential energy of the system. For charged particles this requires the frequent calculation of electrostatic interactions, which is usually the bottleneck of the simulation. To avoid this issue and obtain results in reasonable times, many studies replace the long-range potential by a short range approximation. This, however, leads to systematic errors and unphysical results. On the other hand standard electrostatic solvers such as Ewald summation or fast Poisson solvers are highly inefficient or introduce uncontrollable systematic errors at high resolution. In this paper we describe how the Fast Multipole Method by Greengard and Rokhlin can be adapted to overcome this issue by dramatically reducing computational costs. We exploit the fact that each update in the transition rate calculation corresponds to a single particle move and changes the configuration only by a small amount. This allows us to construct an algorithm which scales linearly in the number of charges for each KMC step, something which had not been deemed to be possible before. We demonstrate the performance and parallel scalability of the method by implementing it in a performance portable software library. We describe the high-level Python interface of the code which makes it easy to adapt to specific cases.
△ Less
Submitted 1 March, 2020; v1 submitted 10 May, 2019;
originally announced May 2019.
-
Mobile Artificial Intelligence Technology for Detecting Macula Edema and Subretinal Fluid on OCT Scans: Initial Results from the DATUM alpha Study
Authors:
Stephen G. Odaibo,
Mikelson MomPremier,
Richard Y. Hwang,
Salman J. Yousuf,
Steven L. Williams,
Joshua Grant
Abstract:
Artificial Intelligence (AI) is necessary to address the large and growing deficit in retina and healthcare access globally. And mobile AI diagnostic platforms running in the Cloud may effectively and efficiently distribute such AI capability. Here we sought to evaluate the feasibility of Cloud-based mobile artificial intelligence for detection of retinal disease. And to evaluate the accuracy of a…
▽ More
Artificial Intelligence (AI) is necessary to address the large and growing deficit in retina and healthcare access globally. And mobile AI diagnostic platforms running in the Cloud may effectively and efficiently distribute such AI capability. Here we sought to evaluate the feasibility of Cloud-based mobile artificial intelligence for detection of retinal disease. And to evaluate the accuracy of a particular such system for detection of subretinal fluid (SRF) and macula edema (ME) on OCT scans. A multicenter retrospective image analysis was conducted in which board-certified ophthalmologists with fellowship training in retina evaluated OCT images of the macula. They noted the presence or absence of ME or SRF, then compared their assessment to that obtained from Fluid Intelligence, a mobile AI app that detects SRF and ME on OCT scans. Investigators consecutively selected retinal OCTs, while making effort to balance the number of scans with retinal fluid and scans without. Exclusion criteria included poor scan quality, ambiguous features, macula holes, retinoschisis, and dense epiretinal membranes. Accuracy in the form of sensitivity and specificity of the AI mobile App was determined by comparing its assessments to those of the retina specialists. At the time of this submission, five centers have completed their initial studies. This consists of a total of 283 OCT scans of which 155 had either ME or SRF ("wet") and 128 did not ("dry"). The sensitivity ranged from 82.5% to 97% with a weighted average of 89.3%. The specificity ranged from 52% to 100% with a weighted average of 81.23%. CONCLUSION: Cloud-based Mobile AI technology is feasible for the detection retinal disease. In particular, Fluid Intelligence (alpha version), is sufficiently accurate as a screening tool for SRF and ME, especially in underserved areas. Further studies and technology development is needed.
△ Less
Submitted 12 February, 2019; v1 submitted 7 February, 2019;
originally announced February 2019.
-
DL_MONTE: A multipurpose code for Monte Carlo simulation
Authors:
Andrey V. Brukhno,
James Grant,
Tom L. Underwood,
Kevin Stratford,
Stephen C. Parker,
John A. Purton,
Nigel B. Wilding
Abstract:
DL_MONTE is an open source, general-purpose software package for performing Monte Carlo simulations. It includes a wide variety of force fields and MC techniques, and thus is applicable to a broad range of problems in molecular simulation. Here we provide an overview of DL_MONTE, focusing on key features recently added to the package. These include the ability to treat systems confined to a planar…
▽ More
DL_MONTE is an open source, general-purpose software package for performing Monte Carlo simulations. It includes a wide variety of force fields and MC techniques, and thus is applicable to a broad range of problems in molecular simulation. Here we provide an overview of DL_MONTE, focusing on key features recently added to the package. These include the ability to treat systems confined to a planar pore (i.e. `slit' or `slab' boundary conditions); the lattice-switch Monte Carlo (LSMC) method for evaluating precise free energy differences between competing polymorphs; various commonly-used methods for evaluating free energy profiles along transition pathways (including umbrella sampling, Wang-Landau and transition matrix); and a supplementary Python toolkit for simulation management and application of the histogram reweighting analysis method. We provide two `real world' examples to elucidate the use of these methods in DL_MONTE. In particular, we apply umbrella sampling to calculate the free energy profile associated with the translocation of a lipid through a bilayer. Moreover we employ LSMC to examine the thermodynamic stability of two plastic crystal phases of water at high pressure. Beyond this, we provide instructions on how to access DL_MONTE, and point to additional information valuable to existing and prospective users.
△ Less
Submitted 1 March, 2018;
originally announced March 2018.
-
Long range forces in a performance portable Molecular Dynamics framework
Authors:
William R. Saunders,
James Grant,
Eike H. Müller
Abstract:
Molecular Dynamics (MD) codes predict the fundamental properties of matter by following the trajectories of a collection of interacting model particles. To exploit diverse modern manycore hardware, efficient codes must use all available parallelism. At the same time they need to be portable and easily extendible by the domain specialist (physicist/chemist) without detailed knowledge of this hardwa…
▽ More
Molecular Dynamics (MD) codes predict the fundamental properties of matter by following the trajectories of a collection of interacting model particles. To exploit diverse modern manycore hardware, efficient codes must use all available parallelism. At the same time they need to be portable and easily extendible by the domain specialist (physicist/chemist) without detailed knowledge of this hardware. To address this challenge, we recently described a new Domain Specific Language (DSL) for the development of performance portable MD codes based on a "Separation of Concerns": a Python framework automatically generates efficient parallel code for a range of target architectures.
Electrostatic interactions between charged particles are important in many physical systems and often dominate the runtime. Here we discuss the inclusion of long-range interaction algorithms in our code generation framework. These algorithms require global communications and careful consideration has to be given to any impact on parallel scalability. We implemented an Ewald summation algorithm for electrostatic forces, present scaling comparisons for different system sizes and compare to the performance of existing codes. We also report on further performance optimisations delivered with OpenMP shared memory parallelism.
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
A Domain Specific Language for Performance Portable Molecular Dynamics Algorithms
Authors:
William R. Saunders,
James Grant,
Eike H. Müller
Abstract:
Developers of Molecular Dynamics (MD) codes face significant challenges when adapting existing simulation packages to new hardware. In a continuously diversifying hardware landscape it becomes increasingly difficult for scientists to be experts both in their own domain (physics/chemistry/biology) and specialists in the low level parallelisation and optimisation of their codes. To address this chal…
▽ More
Developers of Molecular Dynamics (MD) codes face significant challenges when adapting existing simulation packages to new hardware. In a continuously diversifying hardware landscape it becomes increasingly difficult for scientists to be experts both in their own domain (physics/chemistry/biology) and specialists in the low level parallelisation and optimisation of their codes. To address this challenge, we describe a "Separation of Concerns" approach for the development of parallel and optimised MD codes: the science specialist writes code at a high abstraction level in a domain specific language (DSL), which is then translated into efficient computer code by a scientific programmer. In a related context, an abstraction for the solution of partial differential equations with grid based methods has recently been implemented in the (Py)OP2 library. Inspired by this approach, we develop a Python code generation system for molecular dynamics simulations on different parallel architectures, including massively parallel distributed memory systems and GPUs. We demonstrate the efficiency of the auto-generated code by studying its performance and scalability on different hardware and compare it to other state-of-the-art simulation packages. With growing data volumes the extraction of physically meaningful information from the simulation becomes increasingly challenging and requires equally efficient implementations. A particular advantage of our approach is the easy expression of such analysis algorithms. We consider two popular methods for deducing the crystalline structure of a material from the local environment of each atom, show how they can be expressed in our abstraction and implement them in the code generation framework.
△ Less
Submitted 13 November, 2017; v1 submitted 11 April, 2017;
originally announced April 2017.
-
Triangular Constellations in Fractal Measures
Authors:
Michael Wilkinson,
John Grant
Abstract:
The local structure of a fractal set is described by its dimension $D$, which is the exponent of a power-law relating the mass ${\cal N}$ in a ball to its radius $ε$: ${\cal N}\sim ε^D$. It is desirable to characterise the {\em shapes} of constellations of points sampling a fractal measure, as well as their masses. The simplest example is the distribution of shapes of triangles formed by triplets…
▽ More
The local structure of a fractal set is described by its dimension $D$, which is the exponent of a power-law relating the mass ${\cal N}$ in a ball to its radius $ε$: ${\cal N}\sim ε^D$. It is desirable to characterise the {\em shapes} of constellations of points sampling a fractal measure, as well as their masses. The simplest example is the distribution of shapes of triangles formed by triplets of points, which we investigate for fractals generated by chaotic dynamical systems. The most significant parameter describing the triangle shape is the ratio $z$ of its area to the radius of gyration squared. We show that the probability density of $z$ has a phase transition: $P(z)$ is independent of $ε$ and approximately uniform below a critical flow compressibility $β_{\rm c}$, but for $β>β_{\rm c}$ it is described by two power laws: $P(z)\sim z^{α_1}$ when $1\gg z\gg z_{\rm c}(ε)$, and $P(z)\sim z^{α_2}$ when $z\ll z_{\rm c}(ε)$.
△ Less
Submitted 3 May, 2014;
originally announced May 2014.
-
Analyzing mechanisms and microscopic reversibility of self-assembly
Authors:
James Grant,
Robert L. Jack,
Stephen Whitelam
Abstract:
We use computer simulations to investigate self-assembly in a system of model chaperonin proteins, and in an Ising lattice gas. We discuss the mechanisms responsible for rapid and efficient assembly in these systems, and we use measurements of dynamical activity and assembly progress to compare their propensities for kinetic trap**. We use the analytic solution of a simple minimal model to illus…
▽ More
We use computer simulations to investigate self-assembly in a system of model chaperonin proteins, and in an Ising lattice gas. We discuss the mechanisms responsible for rapid and efficient assembly in these systems, and we use measurements of dynamical activity and assembly progress to compare their propensities for kinetic trap**. We use the analytic solution of a simple minimal model to illustrate the key features associated with such trap**, paying particular attention to the number of ways that particles can misbind. We discuss the relevance of our results for the design and control of self-assembly in general.
△ Less
Submitted 8 December, 2011; v1 submitted 23 August, 2011;
originally announced August 2011.
-
Lband radiometric behaviour of pine forests for a variety of surface moisture conditions
Authors:
Jennifer Grant,
Jean Pierre Wigneron,
A. A. Van De Griend,
François Demontoux,
Gilles Ruffié,
A. Della Vecchia,
N. Skou,
Bénédicte Le Crom
Abstract:
From July-December 2004 the experimental campaign 'Bray 2004' was conducted in the coniferous forest of Les Landes near Bordeaux, France, using a multi-angle L-band (1.4 GHz) radiometer to measure upwelling radiation above the forest. At the same time, ground measurements were taken of soil and litter moisture content. This experiment was done in the context of the upcoming SMOS mission in order…
▽ More
From July-December 2004 the experimental campaign 'Bray 2004' was conducted in the coniferous forest of Les Landes near Bordeaux, France, using a multi-angle L-band (1.4 GHz) radiometer to measure upwelling radiation above the forest. At the same time, ground measurements were taken of soil and litter moisture content. This experiment was done in the context of the upcoming SMOS mission in order to improve our understanding of the behaviour of the L-band signal above forested areas. Very little information exists on this subject at the moment, especially for varying hydrological conditions. Furthermore, additional measurements were done at the University of Bordeaux (PIOM laboratory) to determine the dielectric behaviour of a litter layer such as that found at the Bray site. There is some evidence that this layer may have a different influence on the L-band signal than either the soil or the vegetation, however the exact behaviour of the litter layer and the extent of its influence on the L-band signal are as yet unknown. This paper presents 1) results of the Bray experiment describing the behaviour of the above-canopy L-band emissivity for different conditions of ground moisture and 2) the relationship between soil and litter moisture content and results of the laboratory experiments on litter dielectric properties. Together this will give a first insight into the L-band radiometric properties of the different forest layers for varying hydrological conditions.
△ Less
Submitted 12 July, 2007;
originally announced July 2007.
-
Etude D'Un Modele D'Inversion Liant L'Emissivite a L'Humidite Des Sols. Contribution a la Mise Au Point De L'Algorithme De la Mission Smos
Authors:
François Demontoux,
Bénédicte Le Crom,
Gilles Ruffié,
Jean Pierre Wigneron,
Jennifer Grant,
Heather Lawrence
Abstract:
The work which we present takes place within the framework of mission SMOS of the ESA which will consist to send a radiometer (1.4 GHz) in space. The goal of the research which we propose is the improvement of the comprehension of the effects of structure soil and litter. The effects of the litter and heterogeneities of the ground are probably important but still ignored. Its effect can be corre…
▽ More
The work which we present takes place within the framework of mission SMOS of the ESA which will consist to send a radiometer (1.4 GHz) in space. The goal of the research which we propose is the improvement of the comprehension of the effects of structure soil and litter. The effects of the litter and heterogeneities of the ground are probably important but still ignored. Its effect can be corrected via a simple radiative model. It is thus necessary to set up an analytical model which would make it possible to correct the effect of this additional layer. The objective of this article is to present the analytical models which we retained to correct the effect of the vegetation and the litter in order to know the emissivity of the bare soil. We developed a numerical model (with software HFSS) of calculation of the emissivity of multi-layer systems in order to validate the results of the forward inversion models. Ranges of permittivity are introduced with the model in order to take account of the disturbances related to measurement and the variation of the water content of the layers.
△ Less
Submitted 12 July, 2007;
originally announced July 2007.
-
Caracterisation Electromagnetique De Materiaux Geologiques En Vue Du Suivi De L'Humidite Des Sols Par Radiometrie Micro-Ondes
Authors:
Bénédicte Le Crom,
François Demontoux,
Gilles Ruffié,
Jean Pierre Wigneron,
Jennifer Grant
Abstract:
The work which we present takes place within the framework of mission SMOS of the ESA which will consist to send a radiometer (1.4 GHz) in space. The goal of the research which we propose is the improvement of the comprehension of the effects of structures composed of soil and litter. The effects of the litter and heterogeneities of the ground are probably important but still ignored. The object…
▽ More
The work which we present takes place within the framework of mission SMOS of the ESA which will consist to send a radiometer (1.4 GHz) in space. The goal of the research which we propose is the improvement of the comprehension of the effects of structures composed of soil and litter. The effects of the litter and heterogeneities of the ground are probably important but still ignored. The objective of this work was to study the dielectric properties of a type of litter and ground in order to integrate these values into an analytical multi layers model of soil. The objective is to characterize the effects of this layer on the total multi layer system. This will make possible to lead to a simple analytical formulation of a model of litter which can be integrated into the calculation algorithm of SMOS in order to collect information on moisture starting from measurements of emissivity
△ Less
Submitted 12 July, 2007;
originally announced July 2007.
-
Caractérisation électromagnétique de milieux hétérogènes naturels - Application à la mesure de l'humidité du sol par radiométrie micro-onde
Authors:
François Demontoux,
Gilles Ruffié,
Jean Pierre Wigneron,
Maria-José Escorihuela,
Jennifer Grant
Abstract:
The work which we present takes place within the framework of mission SMOS of the ESA which will consist to send a radiometer (1.4 GHz) in space. The goal of the research which we propose is the improvement of the comprehension of the effects of structure soil and litter. The effects of the litter and heterogeneities of the ground are probably important but still are very ignored. So we develope…
▽ More
The work which we present takes place within the framework of mission SMOS of the ESA which will consist to send a radiometer (1.4 GHz) in space. The goal of the research which we propose is the improvement of the comprehension of the effects of structure soil and litter. The effects of the litter and heterogeneities of the ground are probably important but still are very ignored. So we developed an experimental approach in laboratory and in situ. That makes it possible to take measurements for various configurations (frequency, temporal, polarization, incidence, Bi-statics, Brewster effect...) and in term of surface conditions(homogeneous or heterogeneous ground, more or less wet, presence of litter...). Measurements at the laboratory with waveguide enabled us to characterize the various components of the geological structure (ground, rocks) and to check the model of Dobson usually used.
△ Less
Submitted 12 July, 2007;
originally announced July 2007.
-
Inversion model validation of ground emissivity. Contribution to the development of SMOS algorithm
Authors:
François Demontoux,
Bénédicte Le Crom,
Gilles Ruffié,
Jean Pierre Wigneron,
Jennifer Grant,
Daniel Medina Hernandez
Abstract:
SMOS (Soil Moisture and Ocean Salinity), is the second mission of 'Earth Explorer' to be developed within the program 'Living Planet' of the European Space Agency (ESA). This satellite, containing the very first 1.4GHz interferometric radiometer 2D, will carry out the first cartography on a planetary scale of the moisture of the grounds and the salinity of the oceans. The forests are relatively…
▽ More
SMOS (Soil Moisture and Ocean Salinity), is the second mission of 'Earth Explorer' to be developed within the program 'Living Planet' of the European Space Agency (ESA). This satellite, containing the very first 1.4GHz interferometric radiometer 2D, will carry out the first cartography on a planetary scale of the moisture of the grounds and the salinity of the oceans. The forests are relatively opaque, and the knowledge of moisture remains problematic. The effect of the vegetation can be corrected thanks a simple radiative model. Nevertheless simulations show that the effect of the litter on the emissivity of a system litter + ground is not negligible. Our objective is to highlight the effects of this layer on the total multi layer system. This will make it possible to lead to a simple analytical formulation of a model of litter which can be integrated into the calculation algorithm of SMOS. Radiometer measurements, coupled to dielectric characterizations of samples in laboratory can enable us to characterize the geological structure. The goal of this article is to present the step which we chose to validate this analytical model.
△ Less
Submitted 6 July, 2007;
originally announced July 2007.
