-
Real-time antiproton annihilation vertexing with sub-micron resolution
Authors:
M. Berghold,
D. Orsucci,
F. Guatieri,
S. Alfaro,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
A. Chehaimi,
G. Consolati,
M. Doser,
K. Eliaszuk,
R. Ferguson,
M. Germann,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova
, et al. (42 additional authors not shown)
Abstract:
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric…
▽ More
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}μm$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moiré deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
CIRCUS: an autonomous control system for antimatter, atomic and quantum physics experiments
Authors:
Marco Volponi,
Saiva Huck,
Ruggero Caravita,
Jakub Zielinski,
Georgy Kornakov,
Grzegorz Kasprowicz,
Dorota Nowicka,
Tassilo Rauschendorfer,
Benjamin Rienäcker,
Francesco Prelz,
Marcis Auzins,
Benedikt Bergmann,
Petr Burian,
Roberto Sennen Brusa,
Antoine Camper,
Fabrizio Castelli,
Roman Ciuryło,
Giovanni Consolati,
Michael Doser,
Lisa Glöggler,
Łukasz Graczykowski,
Malgorzata Grosbart,
Francesco Guatieri,
Nataly Gusakova,
Fredrik Gustafsson
, et al. (27 additional authors not shown)
Abstract:
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broad…
▽ More
A powerful and robust control system is a crucial, often neglected, pillar of any modern, complex physics experiment that requires the management of a multitude of different devices and their precise time synchronisation. The AEgIS collaboration presents CIRCUS, a novel, autonomous control system optimised for time-critical experiments such as those at CERN's Antiproton Decelerator and, more broadly, in atomic and quantum physics research. Its setup is based on Sinara/ARTIQ and TALOS, integrating the ALPACA analysis pipeline, the last two developed entirely in AEgIS. It is suitable for strict synchronicity requirements and repeatable, automated operation of experiments, culminating in autonomous parameter optimisation via feedback from real-time data analysis. CIRCUS has been successfully deployed and tested in AEgIS; being experiment-agnostic and released open-source, other experiments can leverage its capabilities.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Machine-learning-based particle identification with missing data
Authors:
Miłosz Kasak,
Kamil Deja,
Maja Karwowska,
Monika Jakubowska,
Łukasz Graczykowski,
Małgorzata Janik
Abstract:
In this work, we introduce a novel method for Particle Identification (PID) within the scope of the ALICE experiment at the Large Hadron Collider at CERN. Identifying products of ultrarelativisitc collisions delivered by the LHC is one of the crucial objectives of ALICE. Typically employed PID methods rely on hand-crafted selections, which compare experimental data to theoretical simulations. To i…
▽ More
In this work, we introduce a novel method for Particle Identification (PID) within the scope of the ALICE experiment at the Large Hadron Collider at CERN. Identifying products of ultrarelativisitc collisions delivered by the LHC is one of the crucial objectives of ALICE. Typically employed PID methods rely on hand-crafted selections, which compare experimental data to theoretical simulations. To improve the performance of the baseline methods, novel approaches use machine learning models that learn the proper assignment in a classification task. However, because of the various detection techniques used by different subdetectors, as well as the limited detector efficiency and acceptance, produced particles do not always yield signals in all of the ALICE components. This results in data with missing values. Machine learning techniques cannot be trained with such examples, so a significant part of the data is skipped during training. In this work, we propose the first method for PID that can be trained with all of the available data examples, including incomplete ones. Our approach improves the PID purity and efficiency of the selected sample for all investigated particle species.
△ Less
Submitted 21 December, 2023;
originally announced January 2024.
-
Positronium laser cooling via the $1^3S$-$2^3P$ transition with a broadband laser pulse
Authors:
L. T. Glöggler,
N. Gusakova,
B. Rienäcker,
A. Camper,
R. Caravita,
S. Huck,
M. Volponi,
T. Wolz,
L. Penasa,
V. Krumins,
F. Gustafsson,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
F. Castelli,
R. Ciuryło,
D. Comparat,
G. Consolati,
M. Doser,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
S. Haider,
M. A. Janik
, et al. (27 additional authors not shown)
Abstract:
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground stat…
▽ More
We report on laser cooling of a large fraction of positronium (Ps) in free-flight by strongly saturating the $1^3S$-$2^3P$ transition with a broadband, long-pulsed 243 nm alexandrite laser. The ground state Ps cloud is produced in a magnetic and electric field-free environment. We observe two different laser-induced effects. The first effect is an increase in the number of atoms in the ground state after the time Ps has spent in the long-lived $3^3P$ states. The second effect is the one-dimensional Doppler cooling of Ps, reducing the cloud's temperature from 380(20) K to 170(20) K. We demonstrate a 58(9) % increase in the coldest fraction of the Ps ensemble.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Particle identification with machine learning in ALICE Run 3
Authors:
Maja Karwowska,
Monika Jakubowska,
Łukasz Graczykowski,
Kamil Deja,
Miłosz Kasak
Abstract:
The main focus of the ALICE experiment, quark--gluon plasma measurements, requires accurate particle identification (PID). The ALICE subdetectors allow identifying particles over a broad momentum interval ranging from about 100 MeV/c up to 20 GeV/c. However, a machine learning (ML) model can explore more detector information. During LHC Run 2, preliminary studies with Random Forests obtained much…
▽ More
The main focus of the ALICE experiment, quark--gluon plasma measurements, requires accurate particle identification (PID). The ALICE subdetectors allow identifying particles over a broad momentum interval ranging from about 100 MeV/c up to 20 GeV/c. However, a machine learning (ML) model can explore more detector information. During LHC Run 2, preliminary studies with Random Forests obtained much higher efficiencies and purities for selected particles than standard techniques. For Run 3, we investigate Domain Adaptation Neural Networks that account for the discrepancies between the Monte Carlo simulations and the experimental data. Preliminary studies show that domain adaptation improves particle classification. Moreover, the solution is extended with Feature Set Embedding and attention to give the network more flexibility to train on data with various sets of detector signals. PID ML is already integrated with the ALICE Run 3 Analysis Framework. Preliminary results for the PID of selected particle species, including real-world analyzes, are discussed as well as the possible optimizations.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
GPU propagation and visualisation of particle collisions with ALICE magnetic field model
Authors:
Piotr Nowakowski,
Przemysław Rokita,
Łukasz Graczykowski
Abstract:
The ALICE Collaboration at CERN developed a 3D visualisation tool capable of displaying a representation of collected collision data (particle trajectories, clusters and calorimeter towers) called the Event Display. The Event Display is constantly running in the ALICE Run Control Center as part of the Quality Assurance system, providing the monitoring personnel with visual cues about possible prob…
▽ More
The ALICE Collaboration at CERN developed a 3D visualisation tool capable of displaying a representation of collected collision data (particle trajectories, clusters and calorimeter towers) called the Event Display. The Event Display is constantly running in the ALICE Run Control Center as part of the Quality Assurance system, providing the monitoring personnel with visual cues about possible problems of both hardware and software components during periods of data gathering. In the software, particle trajectories (which are curved due to presence of magnetic field inside the detector) are generated from physical parameters of detected particles, such as electrical charge and momentum. Previously this process in the Event Display used a uniform, constant magnetic field for these calculations, which differs from the spatial variations of the real magnetic field and does not model one of the two magnets used in the detector. Recently, a detailed model of ALICE magnetic field was made available as a shader program for execution on the GPU. In this work we attempt to implement the reconstruction algorithm in a shader form as well, allowing us to combine it with the detailed model to create a full solution for rendering trajectories from collision event data directly on the GPU. This approach has several possible advantages, such as better performance and the ability to alter the magnetic field properties in real-time. This was not previously done for ALICE and as such could be used in the future to upgrade the Event Display.
△ Less
Submitted 22 September, 2023; v1 submitted 7 December, 2022;
originally announced December 2022.
-
Distributed Simulation and Visualization of The ALICE Detector Magnetic Field
Authors:
Piotr Nowakowski,
Przemysław Rokita,
Łukasz Graczykowski
Abstract:
The ALICE detector at CERN uses properties of the magnetic field acting on charged particles as part of the particle tracking and identification system -- via measuring the strength of bending of charged particles in a magnetic field supplied by electromagnets. During the calibration of the detector the magnetic field was measured by the scientific team. The measurement points were then fitted usi…
▽ More
The ALICE detector at CERN uses properties of the magnetic field acting on charged particles as part of the particle tracking and identification system -- via measuring the strength of bending of charged particles in a magnetic field supplied by electromagnets. During the calibration of the detector the magnetic field was measured by the scientific team. The measurement points were then fitted using Chebyshev polynomials to create a field model. That model is used extensively in particle trajectory reconstruction, but for maximum compatibility it is handled by CPU-only software. We propose multiple approaches to the implementation of the model in a shader language, which allows it to run in a graphical GPU environment. This makes the model run more efficiently, as well as enables it to be used for field visualisation, which was not previously done for ALICE.
△ Less
Submitted 1 December, 2021; v1 submitted 20 October, 2021;
originally announced October 2021.
-
New developments for ALICE MasterClasses and the new Particle Therapy MasterClass
Authors:
Łukasz Graczykowski,
Piotr Nowakowski,
Panagiota Foka
Abstract:
International MasterClasses (IMC), an outreach activity of the International Particle Physics Outreach Group (IPPOG), has been bringing cutting-edge particle physics research to schoolchildren for over 15 years now. All four LHC experiments participate in the event, including ALICE, the experiment optimised for the study of heavy-ion collisions. Heavy-ion physics is actively contributing to IMC wi…
▽ More
International MasterClasses (IMC), an outreach activity of the International Particle Physics Outreach Group (IPPOG), has been bringing cutting-edge particle physics research to schoolchildren for over 15 years now. All four LHC experiments participate in the event, including ALICE, the experiment optimised for the study of heavy-ion collisions. Heavy-ion physics is actively contributing to IMC with new developments including experimental measurements but also applications for society, such as treatment of cancer with ions. In particular, ALICE provides three MC measurements related to the main observables used to characterize the properties of the produced Quark-Gluon Plasma. Historically, those MC measurements were developed independently, inheriting from the first one, by several ALICE groups. Since all of them are based on the ROOT EVE package, a project to integrate them into a common framework was undertaken. ALICE delivers now a single and easy-to-use application, compiled under Linux, MacOS, and, for the first time, Windows. Then, in line with current IPPOG goals to increase the global reach and scope of the IMC programme a newly developed measurement on medical applications of particle physics, the Particle Therapy MasterClass (PTMC) was introduced in the IMC2020 programme. It is a simplified version of matRad, a MATLAB-based toolkit for calculation of dose deposition in the body and allows for planning of radiotherapy using different modalities and highlighting the benefits of treatment with ions.
△ Less
Submitted 16 July, 2020; v1 submitted 4 May, 2020;
originally announced May 2020.
