-
How do ionic superdiscs self-assemble in nanopores?
Authors:
Zhuoqing Li,
Aileen R. Raab,
Mohamed A. Kolmangadi,
Mark Busch,
Marco Grunwald,
Felix Demel,
Florian Bertram,
Andriy V. Kityk,
Andreas Schoenhals,
Sabine Laschat,
Patrick Huber
Abstract:
Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Unfortunately, a homogeneous alignment of DILCs on the macroscale is often not achievable, which significantly limits their applica…
▽ More
Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Unfortunately, a homogeneous alignment of DILCs on the macroscale is often not achievable, which significantly limits their applicability. Infiltration into nanoporous solid scaffolds can in principle overcome this drawback. However, due to the extreme experimental challenges to scrutinise liquid crystalline order in extreme spatial confinement, little is known about the structures of DILCs in nanopores. Here, we present temperature-dependent high-resolution optical birefringence measurement and 3D reciprocal space map** based on synchrotron-based X-ray scattering to investigate the thermotropic phase behaviour of dopamine-based ionic liquid crystals confined in cylindrical channels of 180~nm diameter in macroscopic anodic aluminum oxide (AAO) membranes. As a function of the membranes' hydrophilicity and thus the molecular anchoring to the pore walls (edge-on or face-on) and the variation of the hydrophilic-hydrophobic balance between the aromatic cores and the alkyl side chain motifs of the superdiscs by tailored chemical synthesis, we find a particularly rich phase behaviour, which is not present in the bulk state. It is governed by a complex interplay of liquid crystalline elastic energies (bending and splay deformations), polar interactions and pure geometric confinement, and includes textural transitions between radial and axial alignment of the columns with respect to the long nanochannel axis.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Remembering the work of Phillip L. Geissler: A coda to his scientific trajectory
Authors:
Gregory R. Bowman,
Stephen J. Cox,
Christoph Dellago,
Kateri H. DuBay,
Joel D. Eaves,
Daniel A. Fletcher,
Layne B. Frechette,
Michael Grünwald,
Katherine Klymko,
JiYeon Ku,
Ahmad K. Omar,
Eran Rabani,
David R. Reichman,
Julia R. Rogers,
Andreana M. Rosnik,
Grant M. Rotskoff,
Anna R. Schneider,
Nadine Schwierz,
David A. Sivak,
Suriyanarayanan Vaikuntanathan,
Stephen Whitelam,
Asaph Widmer-Cooper
Abstract:
Phillip L. Geissler made important contributions to the statistical mechanics of biological polymers, heterogeneous materials, and chemical dynamics in aqueous environments. He devised analytical and computational methods that revealed the underlying organization of complex systems at the frontiers of biology, chemistry, and materials science. In this retrospective, we celebrate his work at these…
▽ More
Phillip L. Geissler made important contributions to the statistical mechanics of biological polymers, heterogeneous materials, and chemical dynamics in aqueous environments. He devised analytical and computational methods that revealed the underlying organization of complex systems at the frontiers of biology, chemistry, and materials science. In this retrospective, we celebrate his work at these frontiers.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Muon tomography of a reinforced concrete block -- first experimental proof of concept
Authors:
Ernst Niederleithinger,
Simon Gardner,
Thomas Kind,
Ralf Kaiser,
Marcel Grunwald,
Guangliang Yang,
Bernhard Redmer,
Anja Waske,
Frank Mielentz,
Ute Effner,
Christian Köpp,
Anthony Clarkson,
Francis Thomson,
Matthew Ryan
Abstract:
Quality assurance and condition assessment of concrete structures is an important topic world-wide due to the ageing infrastructure and increasing traffic demands. Common topics include, but are not limited to, localisation of rebar or tendon ducts, geometrical irregularities, cracks, voids, honeycombing or other flaws. Non-destructive techniques such as ultrasound or radar have found regular, suc…
▽ More
Quality assurance and condition assessment of concrete structures is an important topic world-wide due to the ageing infrastructure and increasing traffic demands. Common topics include, but are not limited to, localisation of rebar or tendon ducts, geometrical irregularities, cracks, voids, honeycombing or other flaws. Non-destructive techniques such as ultrasound or radar have found regular, successful practical application but sometimes suffer from limited resolution and accuracy, imaging artefacts or restrictions in detecting certain features. Until the 1980s X-ray transmission was used in case of special demands and showed a resolution much higher than other NDT techniques. However, due to safety concerns and cost issues, this method is almost never used anymore. Muon tomography has received much attention recently. Novel detectors for cosmic muons and tomographic imaging algorithms have opened up new fields of application, such as the investigation of freight containers for contraband or the assessment of the contents of radioactive waste containers. But Muon imaging also has the potential to fill some of the gaps currently existing in concrete NDT. As a first step towards practical use and as a proof of concept we used an existing system to image the interior of a reference reinforced 600 kg concrete block. Even with a yet not optimized setup for this kind of investigation, the muon imaging results show more resolution and less distortion compared to ultrasonic and radar imaging. The data acquisition takes more time and signals contain more noise, but the images allowed to detect the same important features that are visible in conventional high energy x-ray tomography. In our experiment, we have shown the tremendous potential of muon imaging for concrete inspection. The next steps include the development of mobile detectors and optimising acquisition and imaging parameters.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Liquid-Like Interfaces Mediate Structural Phase Transitions in Lead Halide Perovskites
Authors:
Connor G. Bischak,
Minliang Lai,
Dylan Lu,
Zhaochuan Fan,
Philippe David,
Dengpan Dong,
Hong Chen,
Ahmed S. Etman,
Teng Lei,
Junliang Sun,
Michael Grünwald,
David T. Limmer,
Peidong Yang,
Naomi S. Ginsberg
Abstract:
Microscopic pathways of structural phase transitions are difficult to probe because they occur over multiple, disparate time and length scales. Using $in$ $situ$ nanoscale cathodoluminescence microscopy, we visualize the thermally-driven transition to the perovskite phase in hundreds of non-perovskite phase nanowires, resolving the initial nanoscale nucleation and subsequent mesoscale growth and q…
▽ More
Microscopic pathways of structural phase transitions are difficult to probe because they occur over multiple, disparate time and length scales. Using $in$ $situ$ nanoscale cathodoluminescence microscopy, we visualize the thermally-driven transition to the perovskite phase in hundreds of non-perovskite phase nanowires, resolving the initial nanoscale nucleation and subsequent mesoscale growth and quantifying the activation energy for phase propagation. In combination with molecular dynamics computer simulations, we reveal that the transformation does not follow a simple martensitic mechanism, and proceeds via ion diffusion through a liquid-like interface between the two structures. While cations are disordered in this liquid-like region, the halide ions retain substantial spatial correlations. We find that the anisotropic crystal structure translates to faster nucleation of the perovskite phase at nanowire ends and faster growth along the long nanowire axis. These results represent a significant step towards manipulating structural phases at the nanoscale for designer materials properties.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Ab initio phase diagram of PbSe crystals calculated with the Random Phase Approximation
Authors:
Tobias Schäfer,
Zhaochuan Fan,
Michael Grünwald,
Georg Kresse
Abstract:
Understanding the phase behavior of semiconductor materials is important for applications in solid state physics and nanoscience. Accurate experimental data is often difficult to obtain due to strong kinetic effects. In this work, we calculate the temperature-pressure phase diagram of lead selenide (PbSe) using the random phase approximation (RPA), an accurate wavefunction based many-body techniqu…
▽ More
Understanding the phase behavior of semiconductor materials is important for applications in solid state physics and nanoscience. Accurate experimental data is often difficult to obtain due to strong kinetic effects. In this work, we calculate the temperature-pressure phase diagram of lead selenide (PbSe) using the random phase approximation (RPA), an accurate wavefunction based many-body technique. We consider three crystalline phases, the low pressure B1 phase (NaCl-type), the intermediate B33 phase (CrB-type), and the high pressure B2 phase (CsCl-type). The electronic contributions to the free energy (at T=0K) are calculated in the Born-Oppenheimer approximation using the RPA, whereas phononic contributions are computed in the quasi-harmonic approximation using DFT and the PBEsol functional. At room temperature, we find transition pressures of 4.6 +/- 0.3 GPa for the B1-B33 transition and 18.7 +/- 0.3 GPa for the B33-B2 transition, in good agreement with experiments. In contrast to the interpretation of recent experiments, we observe a negative Clapeyron slope for both transitions. Gibbs free energy differences between competing structures have small gradients close to coexistence, consistent with pronounced hysteresis observed in experiments. The phase diagram presented in this work can serve as a reference for future studies of PbSe and should prove useful in the development of accurate and efficient force fields.
△ Less
Submitted 30 July, 2018;
originally announced July 2018.
-
The Electronic Structure of CdSe/CdS Core/Shell Seeded Nanorods: Type-I or Quasi-Type-II?
Authors:
Hagai Eshet,
Michael Grunwald,
Eran Rabani
Abstract:
The electronic structure of CdSe/CdS core/shell seeded nanorods of experimentally relevant size is studied using a combination of molecular dynamics and semiempirical pseudopotential techniques, with the aim to address the transition from type-I to a quasi-type-II band alignment. The hole is found to be localized in the core region regardless of its size. The overlap of the electron density with t…
▽ More
The electronic structure of CdSe/CdS core/shell seeded nanorods of experimentally relevant size is studied using a combination of molecular dynamics and semiempirical pseudopotential techniques, with the aim to address the transition from type-I to a quasi-type-II band alignment. The hole is found to be localized in the core region regardless of its size. The overlap of the electron density with the core region depends markedly on the size of the CdSe core: For small cores, we observe little overlap, consistent with type-II behavior. For large cores, significant core-overlap of a number of excitonic states can lead to type-I behavior. When electron-hole interactions are taken into account, the core-overlap is further increased. Our calculations indicate that the observed transition from type-II to type-I is largely due to simple volume effects, and not to band alignment.
△ Less
Submitted 20 October, 2013; v1 submitted 23 July, 2013;
originally announced July 2013.