-
Thermo-refractive noise in silicon nitride microresonators
Authors:
Guanhao Huang,
Erwan Lucas,
Junqiu Liu,
Arslan S. Raja,
Grigory Lihachev,
Michael L. Gorodetsky,
Nils J. Engelsen,
Tobias J. Kippenberg
Abstract:
Thermodynamic noise places a fundamental limit on the frequency stability of dielectric optical resonators. Here, we present the characterization of thermo-refractive noise in photonic-chip-based silicon nitride microresonators and show that thermo-refractive noise is the dominant thermal noise source in the platform. We employed balanced homodyne detection to measure the thermo-refractive noise s…
▽ More
Thermodynamic noise places a fundamental limit on the frequency stability of dielectric optical resonators. Here, we present the characterization of thermo-refractive noise in photonic-chip-based silicon nitride microresonators and show that thermo-refractive noise is the dominant thermal noise source in the platform. We employed balanced homodyne detection to measure the thermo-refractive noise spectrum of microresonators of different diameters. The measurements are in good agreement with theoretical models and finite element method simulations. Our characterization sets quantitative bounds on the scaling and absolute magnitude of thermal noise in photonic chip-based microresonators. An improved understanding of thermo-refractive noise can prove valuable in the design considerations and performance limitations of future photonic integrated devices.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
From the Lugiato-Lefever equation to microresonator based soliton Kerr frequency combs
Authors:
L. A. Lugiato,
F. Prati,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
The model, that is usually called Lugiato-Lefever equation (LLE), was introduced in 1987 with the aim of providing a paradigm for dissipative structure and pattern formation in nonlinear optics. This model, describing a driven, detuned and damped nonlinear Schroedinger equation, gives rise to dissipative spatial and temporal solitons. Recently, the rather idealized conditions, assumed in the LLE,…
▽ More
The model, that is usually called Lugiato-Lefever equation (LLE), was introduced in 1987 with the aim of providing a paradigm for dissipative structure and pattern formation in nonlinear optics. This model, describing a driven, detuned and damped nonlinear Schroedinger equation, gives rise to dissipative spatial and temporal solitons. Recently, the rather idealized conditions, assumed in the LLE, have materialized in the form of continuous wave driven optical microresonators, with the discovery of temporal dissipative Kerr solitons (DKS). These experiments have revealed that the LLE is a perfect and exact description of Kerr frequency combs - first observed in 2007, i.e. 20 years after the original formulation of the LLE. - and in particular describe soliton states. Observed to spontaneously form in Kerr frequency combs in crystalline microresonators in 2013, such DKS are preferred state of operation, offering coherent and broadband optical frequency combs, whose bandwidth can be extended exploiting soliton induced broadening phenomena. Combined with the ability to miniaturize and integrate on chip, microresonator based soliton Kerr frequency combs have already found applications in self-referenced frequency combs, dual-comb spectroscopy, frequency synthesis, low noise microwave generation, laser frequency ranging, and astrophysical spectrometer calibration, and have the potential to make comb technology ubiquitous. As such, pattern formation in driven, dissipative nonlinear optical systems is becoming the central Physics of soliton micro-comb technology.
△ Less
Submitted 26 November, 2018;
originally announced November 2018.
-
Electrically pumped photonic integrated soliton microcomb
Authors:
Arslan S. Raja,
Andrey S. Voloshin,
Hairun Guo,
Sofya E. Agafonova,
Junqiu Liu,
Alexander S. Gorodnitskiy,
Maxim Karpov,
Nikolay G. Pavlov,
Erwan Lucas,
Ramzil R. Galiev,
Artem E. Shitikov,
John D. Jost,
Michael L. Gorodetsky,
Tobias J. Kippenberg
Abstract:
Optical frequency combs have revolutionized frequency metrology and timekee**, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a b…
▽ More
Optical frequency combs have revolutionized frequency metrology and timekee**, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pum** of soliton microcombs is essential. To date, however, microcombs still rely on optical pum** by bulk external laser modules that provide the required coherence, frequency agility and power levels for soliton formation. Electrically-driven, chip-integrated microcombs are inhibited by the high threshold power for soliton formation, typically exceeding the power of integrated silicon based lasers, and the required frequency agility for soliton initiation. Recent advances in high-Q Si3N4 microresonators suggest that electrically driven soliton microcombs are possible. Here we demonstrate an electrically-driven, chip-integrated soliton microcomb by coupling an indium phosphide (III-V) multiple-longitudinal-mode laser diode chip to a high-Q Si3N4 photonic integrated microresonator. We observe that self-injection locking of the laser diode to the microresonator, which is accompanied by a x1000 fold narrowing of the laser linewidth, can simultaneously initiate the formation of dissipative Kerr solitons. By tuning the current, we observe a transition from modulation instability, breather solitons to single soliton states. The system requires less than 1 Watt of electrical power, operates at electronically-detectable sub-100 GHz mode spacing and can fit in a volume of ca. 1cm3.
△ Less
Submitted 21 November, 2018; v1 submitted 9 October, 2018;
originally announced October 2018.
-
Narrow linewidth lasing and soliton Kerr-microcombs with ordinary laser diodes
Authors:
N. G. Pavlov,
S. Koptyaev,
G. V. Lihachev,
A. S. Voloshin,
A. A. Gorodnitskii,
M. L. Gorodetsky
Abstract:
Narrow linewidth lasers and optical frequency combs generated with mode-locked lasers revolutionized optical frequency metrology. The advent of soliton Kerr frequency combs in compact crystalline or integrated ring optical microresonators opens new horizons for applications. These combs, as was naturally assumed, however, require narrow-linewidth single-frequency pump lasers. We demonstrate that a…
▽ More
Narrow linewidth lasers and optical frequency combs generated with mode-locked lasers revolutionized optical frequency metrology. The advent of soliton Kerr frequency combs in compact crystalline or integrated ring optical microresonators opens new horizons for applications. These combs, as was naturally assumed, however, require narrow-linewidth single-frequency pump lasers. We demonstrate that a regular multi-frequency Fabry-Perot laser diode self-injection locked to an optical whispering gallery mode (WGM) microresonator can be first efficiently transformed to a single-frequency ultra-narrow-linewidth source and then to coherent soliton comb oscillator with low power consumption and possibility of further integration.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
Spectral purification of microwave signals with disciplined dissipative Kerr solitons
Authors:
Wenle Weng,
Erwan Lucas,
Grigory Lihachev,
Valery E. Lobanov,
Hairun Guo,
Michael L. Gorodetsky,
Tobias J. Kippenberg
Abstract:
Continuous-wave-driven Kerr nonlinear microresonators give rise to self-organization in terms of dissipative Kerr solitons, which constitute optical frequency combs that can be used to generate low-noise microwave signals. Here, by applying either amplitude or phase modulation to the driving laser we create an intracavity potential trap, to discipline the repetition rate of the solitons. We demons…
▽ More
Continuous-wave-driven Kerr nonlinear microresonators give rise to self-organization in terms of dissipative Kerr solitons, which constitute optical frequency combs that can be used to generate low-noise microwave signals. Here, by applying either amplitude or phase modulation to the driving laser we create an intracavity potential trap, to discipline the repetition rate of the solitons. We demonstrate that this effect gives rise to a novel spectral purification mechanism of the external microwave signal frequency, leading to reduced phase noise of the output signal. We experimentally observe that the microwave signal generated from disciplined solitons follows the external drive at long time scales, but exhibits an unexpected suppression of the fast timing jitter. Counter-intuitively, this filtering takes place for frequencies that are substantially lower than the cavity decay rate. As a result, while the long-time-scale stability of the Kerr frequency comb repetition rate is improved by more than 4 orders of magnitude as a result of locking to the external microwave signal, the soliton stream shows a reduction of the phase noise by 30 dB at offset frequencies above 10 kHz.
△ Less
Submitted 23 December, 2018; v1 submitted 2 August, 2018;
originally announced August 2018.
-
Two-dimensional nonlinear modes and frequency combs in bottle microresonators
Authors:
Y. V. Kartashov,
M. L. Gorodetsky,
A. Kudlinski,
D. V. Skryabin
Abstract:
We investigate theoretically frequency comb generation in a bottle microresonator accounting for the azimuthal and axial degrees of freedom. We first identify a discrete set of the axial nonlinear modes of a bottle microresonator that appear as tilted resonances bifurcating from the spectrum of linear axial modes. We then study azimuthal modulational instability of these modes and show that famili…
▽ More
We investigate theoretically frequency comb generation in a bottle microresonator accounting for the azimuthal and axial degrees of freedom. We first identify a discrete set of the axial nonlinear modes of a bottle microresonator that appear as tilted resonances bifurcating from the spectrum of linear axial modes. We then study azimuthal modulational instability of these modes and show that families of 2D soliton states localized both azimuthally and axially bifurcate from them at critical pump frequencies. Depending on detuning, 2D solitons can be either stable, or form persistent breathers, chaotic spatio-temporal patterns, or exhibit collapse-like evolution.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
Spatial multiplexing of soliton microcombs
Authors:
Erwan Lucas,
Grigori Lihachev,
Romain Bouchand,
Nikolay G. Pavlov,
Arslan S. Raja,
Maxim Karpov,
Michael L. Gorodetsky,
Tobias J. Kippenberg
Abstract:
Dual-comb interferometry utilizes two optical frequency combs to map the optical field's spectrum to a radio-frequency signal without using moving parts, allowing improved speed and accuracy. However, the method is compounded by the complexity and demanding stability associated with operating multiple laser frequency combs. To overcome these challenges, we demonstrate simultaneous generation of mu…
▽ More
Dual-comb interferometry utilizes two optical frequency combs to map the optical field's spectrum to a radio-frequency signal without using moving parts, allowing improved speed and accuracy. However, the method is compounded by the complexity and demanding stability associated with operating multiple laser frequency combs. To overcome these challenges, we demonstrate simultaneous generation of multiple frequency combs from a single optical microresonator and a single continuous-wave laser. Similar to space-division multiplexing, we generate several dissipative Kerr soliton states - circulating solitonic pulses driven by a continuous-wave laser - in different spatial (or polarization) modes of a $\mathrm{MgF_2}$ microresonator. Up to three distinct combs are produced simultaneously, featuring excellent mutual coherence and substantial repetition rate differences, useful for fast acquisition and efficient rejection of soliton intermodulation products. Dual-comb spectroscopy with amplitude and phase retrieval, as well as optical sampling of a breathing soliton, is realised with the free-running system. Compatibility with photonic-integrated resonators could enable the deployment of dual- and triple-comb-based methods to applications where they remained impractical with current technology.
△ Less
Submitted 12 September, 2018; v1 submitted 10 April, 2018;
originally announced April 2018.
-
Dynamics of platicons due to third-order dispersion
Authors:
Valery E. Lobanov,
Artem V. Cherenkov,
Artem E. Shitikov,
Igor A. Bilenko,
Michael L. Gorodetsky
Abstract:
Dynamics of platicons caused by the third-order dispersion is studied. It is shown that under the influence of the third-order dispersion platicons obtain angular velocity depending both on dispersion and on detuning value. A method of tuning of platicon associated optical frequency comb repetition rate is proposed.
Dynamics of platicons caused by the third-order dispersion is studied. It is shown that under the influence of the third-order dispersion platicons obtain angular velocity depending both on dispersion and on detuning value. A method of tuning of platicon associated optical frequency comb repetition rate is proposed.
△ Less
Submitted 16 October, 2017;
originally announced October 2017.
-
Soliton dual comb in crystalline microresonators
Authors:
N. G. Pavlov,
G. Lihachev,
S. Koptyaev,
E. Lucas,
M. Karpov,
N. M. Kondratiev,
I. A. Bilenko,
T. J. Kippenberg,
M. L. Gorodetsky
Abstract:
We present a novel compact dual-comb source based on a monolithic optical crystalline MgF$_2$ multi-resonator stack. The coherent soliton combs generated in two microresonators of the stack with the repetition rate of 12.1 GHz and difference of 1.62 MHz provided after heterodyning a 300 MHz wide radio-frequency comb. Analogous system can be used for dual-comb spectroscopy, coherent LIDAR applicati…
▽ More
We present a novel compact dual-comb source based on a monolithic optical crystalline MgF$_2$ multi-resonator stack. The coherent soliton combs generated in two microresonators of the stack with the repetition rate of 12.1 GHz and difference of 1.62 MHz provided after heterodyning a 300 MHz wide radio-frequency comb. Analogous system can be used for dual-comb spectroscopy, coherent LIDAR applications and massively parallel optical communications.
△ Less
Submitted 22 December, 2016; v1 submitted 21 December, 2016;
originally announced December 2016.
-
High-contrast Kerr Frequency Combs
Authors:
Ivan S. Grudinin,
Vincent Huet,
Nan Yu,
Michael L. Gorodetsky,
Andrey B. Matsko,
Lute Maleki
Abstract:
Kerr frequency combs with depressed harmonic at the optical pump frequency are theoretically explained and experimentally demonstrated. This result is achieved in a MgF$_2$ photonic belt resonator having reduced density of modes in its spectrum and configured with the add-drop optical couplers. ©2016 California Institute of Technology. Government sponsorship
Kerr frequency combs with depressed harmonic at the optical pump frequency are theoretically explained and experimentally demonstrated. This result is achieved in a MgF$_2$ photonic belt resonator having reduced density of modes in its spectrum and configured with the add-drop optical couplers. ©2016 California Institute of Technology. Government sponsorship
△ Less
Submitted 23 December, 2016; v1 submitted 2 December, 2016;
originally announced December 2016.
-
Breathing dissipative solitons in optical microresonators
Authors:
Erwan Lucas,
Maxim Karpov,
Hairun Guo,
Michael Gorodetsky,
Tobias Kippenberg
Abstract:
Dissipative solitons are self-localized structures resulting from a double balance between dispersion and nonlinearity as well as dissipation and a driving force. They occur in a wide variety of fields ranging from optics, hydrodynamics to chemistry and biology. Recently, significant interest has focused on their temporal realization in driven optical microresonators, known as dissipative Kerr sol…
▽ More
Dissipative solitons are self-localized structures resulting from a double balance between dispersion and nonlinearity as well as dissipation and a driving force. They occur in a wide variety of fields ranging from optics, hydrodynamics to chemistry and biology. Recently, significant interest has focused on their temporal realization in driven optical microresonators, known as dissipative Kerr solitons. They provide access to coherent, chip-scale optical frequency combs, which have already been employed in optical metrology, data communication and spectroscopy. Such Kerr resonator systems can exhibit numerous localized intracavity patterns and provide rich insights into nonlinear dynamics. A particular class of solutions consists of breathing dissipative solitons, representing pulses with oscillating amplitude and duration, for which no comprehensive understanding has been presented to date. Here, we observe and study single and multiple breathing dissipative solitons in two different microresonator platforms: crystalline $\mathrm{MgF_2}$ resonator and $\mathrm{Si_3N_4}$ integrated microring. We report a deterministic route to access the breathing state, which allowed for a detailed exploration of the breathing dynamics. In particular, we establish the link between the breathing frequency and two system control parameters - effective pump laser detuning and pump power. Using a fast detection, we present a direct observation of the spatiotemporal dynamics of individual solitons, revealing irregular oscillations and switching. An understanding of breathing solitons is not only of fundamental interest concerning nonlinear systems close to critical transition, but also relevant for applications to prevent breather-induced instabilities in soliton-based frequency combs.
△ Less
Submitted 23 November, 2016; v1 submitted 20 November, 2016;
originally announced November 2016.
-
Mid-Infrared ultra-high-Q resonators based on fluoride crystalline materials
Authors:
C. Lecaplain,
C. Javerzac-Galy,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Decades ago, the losses of glasses in the near infrared (near-IR) were investigated in views of developments for optical telecommunications. Today, properties in the mid-infrared (mid-IR) are of interest for molecular spectroscopy applications. In particular, high-sensitivity spectroscopic techniques based on high-finesse mid-IR cavities hold high promise for medical applications. Due to exception…
▽ More
Decades ago, the losses of glasses in the near infrared (near-IR) were investigated in views of developments for optical telecommunications. Today, properties in the mid-infrared (mid-IR) are of interest for molecular spectroscopy applications. In particular, high-sensitivity spectroscopic techniques based on high-finesse mid-IR cavities hold high promise for medical applications. Due to exceptional purity and low losses, whispering gallery mode microresonators based on polished alkaline earth metal fluoride crystals (i.e the $\mathrm{XF_2}$ family, where X $=$ Ca, Mg, Ba, Sr,...) have attained ultra-high quality (Q) factor resonances (Q$>$10$^{8}$) in the near-IR and visible spectral ranges. Here we report for the first time ultra-high Q factors in the mid-IR using crystalline microresonators. Using an uncoated chalcogenide (ChG) tapered fiber, light from a continuous wave quantum cascade laser (QCL) is efficiently coupled to several crystalline microresonators at 4.4 $μ$m wavelength. We measure the optical Q factor of fluoride crystals in the mid-IR using cavity ringdown technique. We observe that $\mathrm{MgF_2}$ microresonators feature quality factors that are very close to the fundamental absorption limit, as caused by the crystal's multiphonon absorption (Q$\sim$10$^{7}$), in contrast to near-IR measurements far away from these fundamental limits. Due to lower multiphonon absorption in $\mathrm{BaF_2}$ and $\mathrm{SrF_2}$, we show that ultra-high quality factors of Q $\geqslant$ 1.4 $\times 10^{8}$ can be reached at 4.4 $μ$m. This corresponds to an optical finesse of $\mathcal{F}>$4$\cdot$ 10$^{4}$, the highest value achieved for any type of mid-IR resonator to date, and a more than 10-fold improvement over the state-of-the-art. Such compact ultra-high Q crystalline microresonators provide a route for narrow linewidth frequency-stabilized QCL or mid-IR Kerr comb generation.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Universal dynamics and controlled switching of dissipative Kerr solitons in optical microresonators
Authors:
M. Karpov,
H. Guo,
E. Lucas,
A. Kordts,
M. H. P. Pfeiffer,
G. Lichachev,
V. E. Lobanov,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Dissipative temporal Kerr solitons in optical microresonators enable to convert a continuous wave laser into a train of femtosecond pulses. Of particular interest are single soliton states, whose $\mathrm{sech}^{2}$ spectral envelope provides a spectrally smooth and low noise optical frequency comb, and that recently have been generated in crystalline, silica, and silicon-nitride resonators. Here,…
▽ More
Dissipative temporal Kerr solitons in optical microresonators enable to convert a continuous wave laser into a train of femtosecond pulses. Of particular interest are single soliton states, whose $\mathrm{sech}^{2}$ spectral envelope provides a spectrally smooth and low noise optical frequency comb, and that recently have been generated in crystalline, silica, and silicon-nitride resonators. Here, we study the dynamics of multiple soliton states containing ${N}$ solitons and report the discovery of a novel, yet simple mechanism which makes it possible to reduce deterministically the number of solitons, one by one, i.e. ${N\! \to\! N\!-\!1\! \to\! \dots \!\to\! 1}$. By applying weak phase modulation, we directly characterize the soliton state via a double-resonance response. The dynamical probing demonstrates that transitions occur in a predictable way, and thereby enables us to map experimentally the underlying multi-stability diagram of dissipative Kerr solitons. These measurements reveal the "lifted" degeneracy of soliton states as a result of the power-dependent thermal shift of the cavity resonance (i.e. the thermal nonlinearity). The experimental results are in agreement with theoretical and numerical analysis that incorporate the thermal nonlinearity. By studying two different microresonator platforms (integrated $\mathrm{Si_{3}N_{4}}$ microresonators and crystalline $\mathrm{MgF_{2}}$ resonators) we confirm that these effects have a universal nature. Beyond elucidating the fundamental dynamical properties of dissipative Kerr solitons the observed phenomena are also of practical relevance, providing a manipulation toolbox which enables to sequentially reduce, monitor and stabilize the number ${N}$ of solitons, preventing it from decay. Achieving reliable single soliton operation and stabilization in this manner in optical resonators is imperative to applications.
△ Less
Submitted 19 January, 2016;
originally announced January 2016.
-
Generation of platicons and frequency combs in optical microresonators with normal GVD by modulated pump
Authors:
Valery E. Lobanov,
Grigory Lihachev,
Michael L. Gorodetsky
Abstract:
We demonstrate that flat-topped dissipative solitonic pulses, platicons, and corresponding frequency combs can be excited in optical microresonators with normal group velocity dispersion using either amplitude modulation of the pump or bichromatic pump. Soft excitation may occur in particular frequency range if modulation depth is large enough and modulation frequency is close to the free spectral…
▽ More
We demonstrate that flat-topped dissipative solitonic pulses, platicons, and corresponding frequency combs can be excited in optical microresonators with normal group velocity dispersion using either amplitude modulation of the pump or bichromatic pump. Soft excitation may occur in particular frequency range if modulation depth is large enough and modulation frequency is close to the free spectral range of the microresonator.
△ Less
Submitted 9 December, 2015; v1 submitted 27 August, 2015;
originally announced August 2015.
-
Dissipative Kerr solitons in optical microresonators
Authors:
Tobias Herr,
Michael L. Gorodetsky,
Tobias J. Kippenberg
Abstract:
This chapter describes the discovery and stable generation of temporal dissipative Kerr solitons in continuous-wave (CW) laser driven optical microresonators. The experimental signatures as well as the temporal and spectral characteristics of this class of bright solitons are discussed. Moreover, analytical and numerical descriptions are presented that do not only reproduce qualitative features bu…
▽ More
This chapter describes the discovery and stable generation of temporal dissipative Kerr solitons in continuous-wave (CW) laser driven optical microresonators. The experimental signatures as well as the temporal and spectral characteristics of this class of bright solitons are discussed. Moreover, analytical and numerical descriptions are presented that do not only reproduce qualitative features but can also be used to accurately model and predict the characteristics of experimental systems. Particular emphasis lies on temporal dissipative Kerr solitons with regard to optical frequency comb generation where they are of particular importance. Here, one example is spectral broadening and self-referencing enabled by the ultra-short pulsed nature of the solitons. Another example is dissipative Kerr soliton formation in integrated on-chip microresonators where the emission of a dispersive wave allows for the direct generation of unprecedentedly broadband and coherent soliton spectra with smooth spectral envelope.
△ Less
Submitted 20 August, 2015;
originally announced August 2015.
-
Spontaneous crystallization noise in mirrors of gravitational wave detectors
Authors:
N. M. Kondratiev,
V. B. Braginsky,
S. P. Vyatchanin,
M. L. Gorodetsky
Abstract:
Core optics components for high precision measurements are made of stable materials, having small optical and mechanical dissipation. The natural choice in many cases is glass, in particular fused silica. Glass is a solid amorphous state of material that couldn't become a crystal due to high viscosity. However thermodynamically or externally activated stimulated local processes of spontaneous crys…
▽ More
Core optics components for high precision measurements are made of stable materials, having small optical and mechanical dissipation. The natural choice in many cases is glass, in particular fused silica. Glass is a solid amorphous state of material that couldn't become a crystal due to high viscosity. However thermodynamically or externally activated stimulated local processes of spontaneous crystallization (known as devitrification) are still possible. Being random, these processes can produce an additional noise, and influence the performance of such experiments as laser gravitational wave detection.
△ Less
Submitted 1 July, 2015;
originally announced July 2015.
-
Frequency combs and platicons in optical microresonators with normal GVD
Authors:
V. E. Lobanov,
G. Lihachev,
T. J. Kippenberg,
M. L. Gorodetsky
Abstract:
We predict the existence of a novel type of the flat-top dissipative solitonic pulses, "platicons", in microresonators with normal group velocity dispersion (GVD). We propose methods to generate these platicons from cw pump. Their duration may be altered significantly by tuning the pump frequency. The transformation of a discrete energy spectrum of dark solitons of the Lugiato-Lefever equation int…
▽ More
We predict the existence of a novel type of the flat-top dissipative solitonic pulses, "platicons", in microresonators with normal group velocity dispersion (GVD). We propose methods to generate these platicons from cw pump. Their duration may be altered significantly by tuning the pump frequency. The transformation of a discrete energy spectrum of dark solitons of the Lugiato-Lefever equation into a quasicontinuous spectrum of platicons is demonstrated. Generation of similar structures is also possible with bi-harmonic, phase/amplitude modulated pump or via laser injection locking.
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
Photonic chip based optical frequency comb using soliton induced Cherenkov radiation
Authors:
Victor Brasch,
Tobias Herr,
Michael Geiselmann,
Grigoriy Lihachev,
Martin H. P. Pfeiffer,
Michael L. Gorodetsky,
Tobias J. Kippenberg
Abstract:
By continuous wave pum** of a dispersion engineered, planar silicon nitride microresonator, continuously circulating, sub-30fs short temporal dissipative solitons are generated, that correspond to pulses of 6 optical cycles and constitute a coherent optical frequency comb in the spectral domain. Emission of soliton induced Cherenkov radiation caused by higher order dispersion broadens the spectr…
▽ More
By continuous wave pum** of a dispersion engineered, planar silicon nitride microresonator, continuously circulating, sub-30fs short temporal dissipative solitons are generated, that correspond to pulses of 6 optical cycles and constitute a coherent optical frequency comb in the spectral domain. Emission of soliton induced Cherenkov radiation caused by higher order dispersion broadens the spectral bandwidth to 2/3 of an octave, sufficient for self referencing, in excellent agreement with recent theoretical predictions and the broadest coherent microresonator frequency comb generated to date. In a further step, this frequency comb is fully phase stabilized. The ability to preserve coherence over a broad spectral bandwidth using soliton induced Cherenkov radiation marks a critical milestone in the development of planar optical frequency combs, enabling on one hand application in e.g. coherent communications, broadband dual comb spectroscopy and Raman spectral imaging, while on the other hand significantly relaxing dispersion requirements for broadband microresonator frequency combs and providing a path for their generation in the visible and UV. Our results underscore the utility and effectiveness of planar microresonator frequency comb technology, that offers the potential to make frequency metrology accessible beyond specialized laboratories.
△ Less
Submitted 8 September, 2015; v1 submitted 30 October, 2014;
originally announced October 2014.
-
Mode spectrum and temporal soliton formation in optical microresonators
Authors:
T. Herr,
V. Brasch,
J. D. Jost,
I. Mirgorodskiy,
G. Lihachev,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
The formation of temporal dissipative solitons in optical microresonators enables compact, high repetition rate sources of ultra-short pulses as well as low noise, broadband optical frequency combs with smooth spectral envelopes. Here we study the influence of the resonator mode spectrum on temporal soliton formation. Using frequency comb assisted diode laser spectroscopy, the measured mode struct…
▽ More
The formation of temporal dissipative solitons in optical microresonators enables compact, high repetition rate sources of ultra-short pulses as well as low noise, broadband optical frequency combs with smooth spectral envelopes. Here we study the influence of the resonator mode spectrum on temporal soliton formation. Using frequency comb assisted diode laser spectroscopy, the measured mode structure of crystalline MgF2 resonators are correlated with temporal soliton formation. While an overal general anomalous dispersion is required, it is found that higher order dispersion can be tolerated as long as it does not dominate the resonator's mode structure. Mode coupling induced avoided crossings in the resonator mode spectrum are found to prevent soliton formation, when affecting resonator modes close to the pump laser. The experimental observations are in excellent agreement with numerical simulations based on the nonlinear coupled mode equations, which reveal the rich interplay of mode crossings and soliton formation.
△ Less
Submitted 7 November, 2013;
originally announced November 2013.
-
Temporal solitons in optical microresonators
Authors:
T. Herr,
V. Brasch,
J. D. Jost,
C. Y. Wang,
N. M. Kondratiev,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Dissipative solitons can emerge in a wide variety of dissipative nonlinear systems throughout the fields of optics, medicine or biology. Dissipative solitons can also exist in Kerr-nonlinear optical resonators and rely on the double balance between parametric gain and resonator loss on the one hand and nonlinearity and diffraction or dispersion on the other hand. Mathematically these solitons are…
▽ More
Dissipative solitons can emerge in a wide variety of dissipative nonlinear systems throughout the fields of optics, medicine or biology. Dissipative solitons can also exist in Kerr-nonlinear optical resonators and rely on the double balance between parametric gain and resonator loss on the one hand and nonlinearity and diffraction or dispersion on the other hand. Mathematically these solitons are solution to the Lugiato-Lefever equation and exist on top of a continuous wave (cw) background. Here we report the observation of temporal dissipative solitons in a high-Q optical microresonator. The solitons are spontaneously generated when the pump laser is tuned through the effective zero detuning point of a high-Q resonance, leading to an effective red-detuned pum**. Red-detuned pum** marks a fundamentally new operating regime in nonlinear microresonators. While usually unstablethis regime acquires unique stability in the presence of solitons without any active feedback on the system. The number of solitons in the resonator can be controlled via the pump laser detuning and transitions to and between soliton states are associated with discontinuous steps in the resonator transmission. Beyond enabling to study soliton physics such as soliton crystals our observations open the route towards compact, high repetition-rate femto-second sources, where the operating wavelength is not bound to the availability of broadband laser gain media. The single soliton states correspond in the frequency domain to low-noise optical frequency combs with smooth spectral envelopes, critical to applications in broadband spectroscopy, telecommunications, astronomy and low phase-noise microwave generation.
△ Less
Submitted 27 June, 2013; v1 submitted 4 November, 2012;
originally announced November 2012.
-
Universal Dynamics of Kerr Frequency Comb Formation in Microresonators
Authors:
T. Herr,
J. Riemensberger,
C. Wang,
K. Hartinger,
E. Gavartin,
R. Holzwarth,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rap…
▽ More
Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rapid progress and the emergence of a wide variety of micro-resonator Kerr-comb platforms, an understanding of the dynamics of the Kerr comb formation is still lacking. In particular the question in which regime low phase noise performance can be achieved has so far not been answered but is of critical importance for future application of this technology. Here an universal, platform independent understanding of the Kerr-comb formation dynamics based on experimental observations in crystalline MgF2 and planar Si3N4 comb generators is given. This explains a wide range of hereto not understood phenomena and reveals for the first time the underlying condition for low phase noise performance.
△ Less
Submitted 13 November, 2011;
originally announced November 2011.
-
Effect of interference on thermal noise and coating optimization in dielectric mirrors
Authors:
N. M. Kondratiev,
A. G. Gurkovsky,
M. L. Gorodetsky
Abstract:
Optical multilayer coatings of high-reflective mirrors significantly determine the properties of Fabry-Perot resonators. Thermal (Brownian) noise in these coatings produce excess phase noise which can seriously degrade the sensitivity of high-precision measurements with these cavities, in particular in laser gravitational-wave antennas (for example project LIGO), where at the current stage it is o…
▽ More
Optical multilayer coatings of high-reflective mirrors significantly determine the properties of Fabry-Perot resonators. Thermal (Brownian) noise in these coatings produce excess phase noise which can seriously degrade the sensitivity of high-precision measurements with these cavities, in particular in laser gravitational-wave antennas (for example project LIGO), where at the current stage it is one of the main limiting factors. We present a method to calculate this effect accurately and analyze different strategies to diminish it by optimizing the coating. Traditionally this noise is calculated as if the beam is reflected from the surface of the mirror fluctuating due to the sums of the fluctuations of each layer. However the beam in fact penetrates a coating and Brownian expansion of the layers leads to dephasing of interference in the coating and consequently to additional change in reflected phase. Fluctuations in the thickness of a layer change the strain in the medium and hence due to photoelastic effect change the refractive index of this layer. This additional effect should be also considered. It is possible to make the noise smaller preserving the reflectivity by changing the total number of layers and thicknesses of high and low refractive ones. We show how this optimized coating may be constructed analytically rather then numerically as before. We also check the possibility to use internal resonant layers and optimized cap layer to decrease the thermal noise.
△ Less
Submitted 18 February, 2011;
originally announced February 2011.
-
Frequency Comb Assisted Diode Laser Spectroscopy for Measurement of Microcavity Dispersion
Authors:
P. Del'Haye,
O. Arcizet,
M. L. Gorodetsky,
R. Holzwarth,
T. J. Kippenberg
Abstract:
While being invented for precision measurement of single atomic transitions, frequency combs have also become a versatile tool for broadband spectroscopy in the last years. In this paper we present a novel and simple approach for broadband spectroscopy, combining the accuracy of an optical fiber-laser-based frequency comb with the ease-of-use of a tunable external cavity diode laser. This scheme…
▽ More
While being invented for precision measurement of single atomic transitions, frequency combs have also become a versatile tool for broadband spectroscopy in the last years. In this paper we present a novel and simple approach for broadband spectroscopy, combining the accuracy of an optical fiber-laser-based frequency comb with the ease-of-use of a tunable external cavity diode laser. This scheme enables broadband and fast spectroscopy of microresonator modes and allows for precise measurements of their dispersion, which is an important precondition for broadband optical frequency comb generation that has recently been demonstrated in these devices. Moreover, we find excellent agreement of measured microresonator dispersion with predicted values from finite element simulations and we show that tailoring microresonator dispersion can be achieved by adjusting their geometrical properties.
△ Less
Submitted 1 July, 2009;
originally announced July 2009.
-
Geometric optics of whispering gallery modes
Authors:
Michael L. Gorodetsky,
Aleksey E. Fomin
Abstract:
Quasiclassical approach and geometric optics allow to describe rather accurately whispering gallery modes in convex axisymmetric bodies. Using this approach we obtain practical formulas for the calculation of eigenfrequencies and radiative Q-factors in dielectrical spheroid and compare them with the known solutions for the particular cases and with numerical calculations. We show how geometrical…
▽ More
Quasiclassical approach and geometric optics allow to describe rather accurately whispering gallery modes in convex axisymmetric bodies. Using this approach we obtain practical formulas for the calculation of eigenfrequencies and radiative Q-factors in dielectrical spheroid and compare them with the known solutions for the particular cases and with numerical calculations. We show how geometrical interpretation allows expansion of the method on arbitrary shaped axisymmetric bodies.
△ Less
Submitted 7 March, 2006;
originally announced March 2006.
-
Geometrical theory of whispering gallery modes
Authors:
Michael L. Gorodetsky,
Aleksey E. Fomin
Abstract:
Using quasiclassical approach rather precise analytical approximations for the eigenfrequencies of whispering gallery modes in convex axisymmetric bodies may be found. We use the eikonal method to analyze the limits of precision of quasiclassical approximation using as a practical example spheroidal dielectric cavity. The series obtained for the calculation of eigenfrequencies is compared with t…
▽ More
Using quasiclassical approach rather precise analytical approximations for the eigenfrequencies of whispering gallery modes in convex axisymmetric bodies may be found. We use the eikonal method to analyze the limits of precision of quasiclassical approximation using as a practical example spheroidal dielectric cavity. The series obtained for the calculation of eigenfrequencies is compared with the known series for dielectric sphere and with numerical calculations. We show how geometrical interpretation allows expansion of the method on arbitrary shaped axisymmetric bodies.
△ Less
Submitted 27 September, 2005;
originally announced September 2005.
-
Microtorus: a High Finesse Microcavity with Whispering-Gallery Modes
Authors:
Vladimir S. Ilchenko,
Michael L. Gorodetsky,
X. Steve Yao,
Lute Maleki
Abstract:
We have demonstrated a 165 micron oblate spheroidal microcavity with free spectral range 383.7 GHz (3.06nm), resonance bandwidth 25 MHz (Q ~ 10^7) at 1550nm, and finesse F > 10^4. The highly oblate spheroidal dielectric microcavity combines very high Q-factor, typical of microspheres, with vastly reduced number of excited whispering-gallery (WG) modes (by two orders of magnitude). The very large…
▽ More
We have demonstrated a 165 micron oblate spheroidal microcavity with free spectral range 383.7 GHz (3.06nm), resonance bandwidth 25 MHz (Q ~ 10^7) at 1550nm, and finesse F > 10^4. The highly oblate spheroidal dielectric microcavity combines very high Q-factor, typical of microspheres, with vastly reduced number of excited whispering-gallery (WG) modes (by two orders of magnitude). The very large free spectral range in the novel microcavity - few hundred instead of few GigaHertz in typical microspheres - is desirable for applications in spectral analysis, narrow-linewidth optical and RF oscillators, and cavity QED.
△ Less
Submitted 28 September, 2000;
originally announced September 2000.
-
Surface and internal scattering in microspheres: limits imposed on the Q-factor and mode splitting
Authors:
M. L. Gorodetsky,
V. S. Ilchenko,
A. D. Pryamikov
Abstract:
Accurate calculation of internal and surface scattering losses in fused silica microspheres is done. We show that in microspheres internal scattering is partly inhibited as compared to losses in the bulk material. We pay attention on the effect of frozen thermodynamical capillary waves on surface roughness. We calculate also the value of mode splitting due to backscattering and other effects of…
▽ More
Accurate calculation of internal and surface scattering losses in fused silica microspheres is done. We show that in microspheres internal scattering is partly inhibited as compared to losses in the bulk material. We pay attention on the effect of frozen thermodynamical capillary waves on surface roughness. We calculate also the value of mode splitting due to backscattering and other effects of this backscattering.
△ Less
Submitted 2 March, 1999;
originally announced March 1999.
-
Optical microsphere resonators: optimal coupling to high-Q whispering gallery modes
Authors:
Michael L. Gorodetsky,
Vladimir S. Ilchenko
Abstract:
A general model is presented for coupling of high-$Q$ whispering-gallery modes in optical microsphere resonators with coupler devices possessing discrete and continuous spectrum of propagating modes. By contrast to conventional high-Q optical cavities, in microspheres independence of high intrinsic quality-factor and controllable parameters of coupling via evanescent field offer variety of regim…
▽ More
A general model is presented for coupling of high-$Q$ whispering-gallery modes in optical microsphere resonators with coupler devices possessing discrete and continuous spectrum of propagating modes. By contrast to conventional high-Q optical cavities, in microspheres independence of high intrinsic quality-factor and controllable parameters of coupling via evanescent field offer variety of regimes earlier available in RF devices. The theory is applied to the earlier-reported data on different types of couplers to microsphere resonators and complemented by experimental demonstration of enhanced coupling efficiency (about 80%) and variable loading regimes with Q>10^8 fused silica microspheres.
△ Less
Submitted 23 May, 1998;
originally announced May 1998.
