-
Fabry-Pérot nanocavities controlled by Casimir forces in electrolyte solutions
Authors:
Lixin Ge,
Kaipeng Liu,
Ke Gong,
Rudolf Podgornik
Abstract:
We propose a design for tuning the resonant spectra of Fabry-Pérot nanocavities mediated by the Casimir force. The system involves a suspended gold nanoplate approaching to a dielectric-coated gold substrate in a univalent electrolyte solution. The gold nanoplate can be stably suspended due to the delicate balance between repulsive and attractive components of the Casimir forces. In an electrolyte…
▽ More
We propose a design for tuning the resonant spectra of Fabry-Pérot nanocavities mediated by the Casimir force. The system involves a suspended gold nanoplate approaching to a dielectric-coated gold substrate in a univalent electrolyte solution. The gold nanoplate can be stably suspended due to the delicate balance between repulsive and attractive components of the Casimir forces. In an electrolyte solution, the presence of ionic-charge fluctuations can partially or totally screen the thermal $n$=0 Matsubara term, resulting in strongly modified interactions. As a result, the separation between the gold nanoplate and the substrate experiences a significant modulation in response to variations in salt concentration. Under proper conditions, we find that the modulation of the Casimir force would strongly shift the resonances of Fabry-Pérot nanocavities at the optical frequencies, when the Debye length of the electrolyte decreases from 1000 nm to 10 nm. Finally, the temperature dependence of the thermal Casimir force would provide an additional modulation of Fabry-Pérot nanocavity resonances for their eventual fine tuning. These results open up a promising venue for general tuning of the optical resonances with potential applications in re-configurable microfluidic nanophotonics.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Capacitive coupling study of the HERD SCD prototype: preliminary results
Authors:
Ruo-Si Lu,
Rui Qiao,
Ke Gong,
Wen-Xi Peng,
Wei-Shuai Zhang,
Dong-Ya Guo,
Jia-Ju Wei,
Yi-Ming Hu,
Jian-Hua Guo,
Qi Wu,
Peng Hu,
Xuan Liu,
Bing Lu,
Yi-Rong Zhang
Abstract:
The Silicon Charge Detector (SCD) is a subdetector of the High Energy Cosmic Radiation Detection payload. The dynamic range of the silicon microstrip detector can be extended by the capacitive coupling effect, which is related to the interstrip capacitance and the coupling capacitance. A detector prototype with several sets of parameters was designed and tested in the ion beams at the CERN Super P…
▽ More
The Silicon Charge Detector (SCD) is a subdetector of the High Energy Cosmic Radiation Detection payload. The dynamic range of the silicon microstrip detector can be extended by the capacitive coupling effect, which is related to the interstrip capacitance and the coupling capacitance. A detector prototype with several sets of parameters was designed and tested in the ion beams at the CERN Super Proton Synchrotron. The capacitive coupling fractions with readout strip and floating strip incidences were studied using the beam test data and SPICE simulation.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Head and Neck Tumor Segmentation from [18F]F-FDG PET/CT Images Based on 3D Diffusion Model
Authors:
Yafei Dong,
Kuang Gong
Abstract:
Head and neck (H&N) cancers are among the most prevalent types of cancer worldwide, and [18F]F-FDG PET/CT is widely used for H&N cancer management. Recently, the diffusion model has demonstrated remarkable performance in various image-generation tasks. In this work, we proposed a 3D diffusion model to accurately perform H&N tumor segmentation from 3D PET and CT volumes. The 3D diffusion model was…
▽ More
Head and neck (H&N) cancers are among the most prevalent types of cancer worldwide, and [18F]F-FDG PET/CT is widely used for H&N cancer management. Recently, the diffusion model has demonstrated remarkable performance in various image-generation tasks. In this work, we proposed a 3D diffusion model to accurately perform H&N tumor segmentation from 3D PET and CT volumes. The 3D diffusion model was developed considering the 3D nature of PET and CT images acquired. During the reverse process, the model utilized a 3D UNet structure and took the concatenation of PET, CT, and Gaussian noise volumes as the network input to generate the tumor mask. Experiments based on the HECKTOR challenge dataset were conducted to evaluate the effectiveness of the proposed diffusion model. Several state-of-the-art techniques based on U-Net and Transformer structures were adopted as the reference methods. Benefits of employing both PET and CT as the network input as well as further extending the diffusion model from 2D to 3D were investigated based on various quantitative metrics and the uncertainty maps generated. Results showed that the proposed 3D diffusion model could generate more accurate segmentation results compared with other methods. Compared to the diffusion model in 2D format, the proposed 3D model yielded superior results. Our experiments also highlighted the advantage of utilizing dual-modality PET and CT data over only single-modality data for H&N tumor segmentation.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Detector performance of the Gamma-ray Transient Monitor onboard DRO-A Satellite
Authors:
Pei-Yi Feng,
Zheng-Hua An,
Da-Li Zhang,
Chen-Wei Wang,
Chao Zheng,
Sheng Yang,
Shao-Lin Xiong,
Jia-Cong Liu,
Xin-Qiao Li,
Ke Gong,
Xiao-**g Liu,
Min Gao,
Xiang-Yang Wen,
Ya-Qing liu,
Xiao-Yun Zhao,
Fan Zhang,
Xi-Lei Sun,
Hong Lu
Abstract:
Gamma-ray Transient Monitor (GTM) is an all-sky monitor onboard the Distant Retrograde Orbit-A (DRO-A) satellite with the scientific objective of detecting gamma-ray transients ranging from 20 keV to 1 MeV. GTM is equipped with 5 Gamma-ray Transient Probe (GTP) detector modules, utilizing the NaI(Tl) scintillator coupled with a SiPM array. To reduce the SiPM noise, GTP makes use of a dedicated dua…
▽ More
Gamma-ray Transient Monitor (GTM) is an all-sky monitor onboard the Distant Retrograde Orbit-A (DRO-A) satellite with the scientific objective of detecting gamma-ray transients ranging from 20 keV to 1 MeV. GTM is equipped with 5 Gamma-ray Transient Probe (GTP) detector modules, utilizing the NaI(Tl) scintillator coupled with a SiPM array. To reduce the SiPM noise, GTP makes use of a dedicated dual-channel coincident readout design. In this work, we firstly studied the impact of different coincidence times on detection efficiency and ultimately selected the 500 ns time coincidence window for offline data processing. To test the performance of GTPs and validate the Monte Carlo simulated energy response, we conducted comprehensive ground calibration tests using Hard X-ray Calibration Facility (HXCF) and radioactive sources, including energy response, detection efficiency, spatial response, bias-voltage response, and temperature dependence. We extensively presented the ground calibration results, and validated the design and mass model of GTP detector. These work paved the road for the in-flight observation and science data analysis.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
A Review on Low-Dose Emission Tomography Post-Reconstruction Denoising with Neural Network Approaches
Authors:
Alexandre Bousse,
Venkata Sai Sundar Kandarpa,
Kuangyu Shi,
Kuang Gong,
Jae Sung Lee,
Chi Liu,
Dimitris Visvikis
Abstract:
Low-dose emission tomography (ET) plays a crucial role in medical imaging, enabling the acquisition of functional information for various biological processes while minimizing the patient dose. However, the inherent randomness in the photon counting process is a source of noise which is amplified in low-dose ET. This review article provides an overview of existing post-processing techniques, with…
▽ More
Low-dose emission tomography (ET) plays a crucial role in medical imaging, enabling the acquisition of functional information for various biological processes while minimizing the patient dose. However, the inherent randomness in the photon counting process is a source of noise which is amplified in low-dose ET. This review article provides an overview of existing post-processing techniques, with an emphasis on deep neural network (NN) approaches. Furthermore, we explore future directions in the field of NN-based low-dose ET. This comprehensive examination sheds light on the potential of deep learning in enhancing the quality and resolution of low-dose ET images, ultimately advancing the field of medical imaging.
△ Less
Submitted 15 January, 2024; v1 submitted 30 December, 2023;
originally announced January 2024.
-
The Energy Response of LaBr3(Ce), LaBr3(Ce,Sr) and NaI(Tl) Crystals for GECAM
Authors:
Pei-Yi Feng,
Xi-Lei Sun,
Zheng-Hua An,
Yong Deng,
Cheng-Er Wang,
Huang Jiang,
Jun-Jie Li,
Da-Li Zhang,
Xin-Qiao Li,
Shao-Lin Xiong,
Chao Zheng,
Ke Gong,
Sheng Yang,
Xiao-**g Liu,
Min Gao,
Xiang-Yang Wen,
Ya-Qing Liu,
Yan-Bing Xu,
Xiao-Yun Zhao,
Jia-Cong Liu,
Fan Zhang,
Hong Lu
Abstract:
The GECAM series of satellites utilize LaBr3(Ce), LaBr3(Ce,Sr), and NaI(Tl) crystals as sensitive materials for gamma-ray detectors (GRDs). To investigate the non-linearity in the detection of low-energy gamma rays and address errors in the E-C relationship calibration, comprehensive tests and comparative studies of the non-linearity of these three crystals were conducted using Compton electrons,…
▽ More
The GECAM series of satellites utilize LaBr3(Ce), LaBr3(Ce,Sr), and NaI(Tl) crystals as sensitive materials for gamma-ray detectors (GRDs). To investigate the non-linearity in the detection of low-energy gamma rays and address errors in the E-C relationship calibration, comprehensive tests and comparative studies of the non-linearity of these three crystals were conducted using Compton electrons, radioactive sources, and mono-energetic X-rays. The non-linearity test results for Compton electrons and X-rays displayed substantial differences, with all three crystals showing higher non-linearity for X-rays and gamma-rays than for Compton electrons. Despite LaBr3(Ce) and LaBr3(Ce,Sr) crystals having higher absolute light yields, they exhibited a noticeable non-linear decrease in light yield, especially at energies below 400 keV. The NaI(Tl) crystal demonstrated excess light output in the 6~200 keV range, reaching a maximum excess of 9.2% at 30 keV in X-ray testing and up to 15.5% at 14 keV during Compton electron testing, indicating a significant advantage in the detection of low-energy gamma rays. Furthermore, this paper explores the underlying causes of the observed non-linearity in these crystals. This study not only elucidates the detector responses of GECAM, but also marks the inaugural comprehensive investigation into the non-linearity of domestically produced lanthanum bromide and sodium iodide crystals.
△ Less
Submitted 27 December, 2023;
originally announced December 2023.
-
Electrical and thermal control of Fabry-Pérot cavities mediated by Casimir forces
Authors:
Lixin Ge,
Bingzhong Li,
Hao Luo,
Ke Gong
Abstract:
Dynamic tuning of optical cavities is highly desired in many photonic systems. Here, we show that Fabry-Pérot(FP) cavities can be actively controlled by the Casimir force. The optical FP cavities consist of a gold nanoplate confronted to an electrical-connecting multi-layer substrate in a liquid environment. The gold nanoplate can be stably suspended due to the balance of repulsive and attractive…
▽ More
Dynamic tuning of optical cavities is highly desired in many photonic systems. Here, we show that Fabry-Pérot(FP) cavities can be actively controlled by the Casimir force. The optical FP cavities consist of a gold nanoplate confronted to an electrical-connecting multi-layer substrate in a liquid environment. The gold nanoplate can be stably suspended due to the balance of repulsive and attractive Casimir forces. Moreover, the suspension distance are modulated strongly by the electric gating or temperature of the system. As a result, we could shift the resonant wavelengthes of the cavities with tens of nanometers at optical frequencies. Finally, we analyze the influence of Brownian motion on the equilibrium distances. Due to the high Q-factor of the FP cavities, our proposed system offers a remarkable platform to experimentally investigate the thermal Casimir effect at sub-micrometer separations
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Fluctuation-induced dispersion forces on thin DNA films
Authors:
Lixin Ge,
Xi Shi,
Binzhong Li,
Ke Gong
Abstract:
In this work, the calculation of Casimir forces across thin DNA films is carried out based on the Lifshitz theory. The variations of Casimir forces due to the DNA thicknesses, volume fractions of containing water, covering media and substrates are investigated. For a DNA film suspended in the air or water, the Casimir force is attractive, and its magnitude increases with decreasing the thickness o…
▽ More
In this work, the calculation of Casimir forces across thin DNA films is carried out based on the Lifshitz theory. The variations of Casimir forces due to the DNA thicknesses, volume fractions of containing water, covering media and substrates are investigated. For a DNA film suspended in the air or water, the Casimir force is attractive, and its magnitude increases with decreasing the thickness of DNA films and the water volume fraction. For DNA films deposited on a dielectric(silica) substrate, the Casimir force is attractive for the air environment. However, the Casimir force shows unusual features in a water environment. Under specific conditions, switching signs of the Casimir force from attractive to repulsive can be achieved by increasing the DNA-film thickness. Finally, the Casimir force for DNA films deposited on a metallic substrate are investigated. The Casimir force is dominant by the repulsive interactions at a small DNA-film thickness for both the air and water environment. In a water environment, the Casimir force turns out to be attractive at a large DNA-film thickness, and a stable Casimir equilibrium can be found. In addition to the adhesion stability, our finding could be applicable to the problems of condensation and de-condensation of DNA, due to the fluctuation-induced dispersion forces.
△ Less
Submitted 3 March, 2023;
originally announced March 2023.
-
Ground calibration of Gamma-Ray Detectors of GECAM-C
Authors:
Chao Zheng,
Zheng-Hua An,
Wen-Xi Peng,
Da-Li Zhang,
Shao-Lin Xiong,
Rui. Qiao,
Yan-Qiu Zhang,
Wang-Chen Xue,
Jia-Cong Liu,
Pei-Yi Feng,
Ce. Cai,
Min Gao,
Ke Gong,
Dong-Ya Guo,
Dong-Jie Hou,
Gang Li,
Xin-Qiao Li,
Yan-Guo Li,
Mao-Shun Li,
Xiao-Hua Liang,
Ya-Qing Liu,
Xiao-**g Liu,
Li-Ming Song,
Xi-Lei Sun,
Wen-Jun Tan
, et al. (13 additional authors not shown)
Abstract:
As a new member of GECAM mission, GECAM-C (also named High Energy Burst Searcher, HEBS) was launched onboard the SATech-01 satellite on July 27th, 2022, which is capable to monitor gamma-ray transients from $\sim$ 6 keV to 6 MeV. As the main detector, there are 12 gamma-ray detectors (GRDs) equipped for GECAM-C. In order to verify the GECAM-C GRD detector performance and to validate the Monte Carl…
▽ More
As a new member of GECAM mission, GECAM-C (also named High Energy Burst Searcher, HEBS) was launched onboard the SATech-01 satellite on July 27th, 2022, which is capable to monitor gamma-ray transients from $\sim$ 6 keV to 6 MeV. As the main detector, there are 12 gamma-ray detectors (GRDs) equipped for GECAM-C. In order to verify the GECAM-C GRD detector performance and to validate the Monte Carlo simulations of detector response, comprehensive on-ground calibration experiments have been performed using X-ray beam and radioactive sources, including Energy-Channel relation, energy resolution, detection efficiency, SiPM voltage-gain relation and the non-uniformity of positional response. In this paper, the detailed calibration campaigns and data analysis results for GECAM-C GRDs are presented, demonstrating the excellent performance of GECAM-C GRD detectors.
△ Less
Submitted 30 May, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
The performance of SiPM-based gamma-ray detector (GRD) of GECAM-C
Authors:
Dali Zhang,
Chao Zheng,
Jiacong Liu,
Zhenghua An,
Chenwei Wang,
Xiangyang Wen,
Xinqiao Li,
Xilei Sun,
Ke Gong,
Yaqing Liu,
Xiao**g Liu,
Sheng Yang,
Wenxi Peng,
Rui Qiao,
Dongya Guo,
Peiyi Feng,
Yanqiu Zhang,
Wangchen Xue,
Wenjun Tan,
Ce Cai,
Shuo Xiao,
Qibin Yi,
Yanbing Xu,
Min Gao,
**zhou Wang
, et al. (20 additional authors not shown)
Abstract:
As a new member of GECAM mission, the GECAM-C (also called High Energy Burst Searcher, HEBS) is a gamma-ray all-sky monitor onboard SATech-01 satellite, which was launched on July 27th, 2022 to detect gamma-ray transients from 6 keV to 6 MeV, such as Gamma-Ray Bursts (GRBs), high energy counterpart of Gravitational Waves (GWs) and Fast Radio Bursts (FRBs), and Soft Gamma-ray Repeaters (SGRs). Toge…
▽ More
As a new member of GECAM mission, the GECAM-C (also called High Energy Burst Searcher, HEBS) is a gamma-ray all-sky monitor onboard SATech-01 satellite, which was launched on July 27th, 2022 to detect gamma-ray transients from 6 keV to 6 MeV, such as Gamma-Ray Bursts (GRBs), high energy counterpart of Gravitational Waves (GWs) and Fast Radio Bursts (FRBs), and Soft Gamma-ray Repeaters (SGRs). Together with GECAM-A and GECAM-B launched in December 2020, GECAM-C will greatly improve the monitoring coverage, localization, as well as temporal and spectral measurements of gamma-ray transients. GECAM-C employs 12 SiPM-based Gamma-Ray Detectors (GRDs) to detect gamma-ray transients . In this paper, we firstly give a brief description of the design of GECAM-C GRDs, and then focus on the on-ground tests and in-flight performance of GRDs. We also did the comparison study of the SiPM in-flight performance between GECAM-C and GECAM-B. The results show GECAM-C GRD works as expected and is ready to make scientific observations.
△ Less
Submitted 7 March, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
PET image denoising based on denoising diffusion probabilistic models
Authors:
Kuang Gong,
Keith A. Johnson,
Georges El Fakhri,
Quanzheng Li,
Tinsu Pan
Abstract:
Due to various physical degradation factors and limited counts received, PET image quality needs further improvements. The denoising diffusion probabilistic models (DDPM) are distribution learning-based models, which try to transform a normal distribution into a specific data distribution based on iterative refinements. In this work, we proposed and evaluated different DDPM-based methods for PET i…
▽ More
Due to various physical degradation factors and limited counts received, PET image quality needs further improvements. The denoising diffusion probabilistic models (DDPM) are distribution learning-based models, which try to transform a normal distribution into a specific data distribution based on iterative refinements. In this work, we proposed and evaluated different DDPM-based methods for PET image denoising. Under the DDPM framework, one way to perform PET image denoising is to provide the PET image and/or the prior image as the network input. Another way is to supply the prior image as the input with the PET image included in the refinement steps, which can fit for scenarios of different noise levels. 120 18F-FDG datasets and 140 18F-MK-6240 datasets were utilized to evaluate the proposed DDPM-based methods. Quantification show that the DDPM-based frameworks with PET information included can generate better results than the nonlocal mean and Unet-based denoising methods. Adding additional MR prior in the model can help achieve better performance and further reduce the uncertainty during image denoising. Solely relying on MR prior while ignoring the PET information can result in large bias. Regional and surface quantification shows that employing MR prior as the network input while embedding PET image as a data-consistency constraint during inference can achieve the best performance. In summary, DDPM-based PET image denoising is a flexible framework, which can efficiently utilize prior information and achieve better performance than the nonlocal mean and Unet-based denoising methods.
△ Less
Submitted 14 September, 2022; v1 submitted 13 September, 2022;
originally announced September 2022.
-
Search for relativistic fractionally charged particles in space
Authors:
DAMPE Collaboration,
F. Alemanno,
C. Altomare,
Q. An,
P. Azzarello,
F. C. T. Barbato,
P. Bernardini,
X. J. Bi,
M. S. Cai,
E. Casilli,
E. Catanzani,
J. Chang,
D. Y. Chen,
J. L. Chen,
Z. F. Chen,
M. Y. Cui,
T. S. Cui,
Y. X. Cui,
H. T. Dai,
A. De-Benedittis,
I. De Mitri,
F. de Palma,
M. Deliyergiyev,
A. Di Giovanni,
M. Di Santo
, et al. (126 additional authors not shown)
Abstract:
More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been…
▽ More
More than a century after the performance of the oil drop experiment, the possible existence of fractionally charged particles FCP still remains unsettled. The search for FCPs is crucial for some extensions of the Standard Model in particle physics. Most of the previously conducted searches for FCPs in cosmic rays were based on experiments underground or at high altitudes. However, there have been few searches for FCPs in cosmic rays carried out in orbit other than AMS-01 flown by a space shuttle and BESS by a balloon at the top of the atmosphere. In this study, we conduct an FCP search in space based on on-orbit data obtained using the DArk Matter Particle Explorer (DAMPE) satellite over a period of five years. Unlike underground experiments, which require an FCP energy of the order of hundreds of GeV, our FCP search starts at only a few GeV. An upper limit of $6.2\times 10^{-10}~~\mathrm{cm^{-2}sr^{-1} s^{-1}}$ is obtained for the flux. Our results demonstrate that DAMPE exhibits higher sensitivity than experiments of similar types by three orders of magnitude that more stringently restricts the conditions for the existence of FCP in primary cosmic rays.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
A Noise-level-aware Framework for PET Image Denoising
Authors:
Ye Li,
Jianan Cui,
Junyu Chen,
Guodong Zeng,
Scott Wollenweber,
Floris Jansen,
Se-In Jang,
Kyungsang Kim,
Kuang Gong,
Quanzheng Li
Abstract:
In PET, the amount of relative (signal-dependent) noise present in different body regions can be significantly different and is inherently related to the number of counts present in that region. The number of counts in a region depends, in principle and among other factors, on the total administered activity, scanner sensitivity, image acquisition duration, radiopharmaceutical tracer uptake in the…
▽ More
In PET, the amount of relative (signal-dependent) noise present in different body regions can be significantly different and is inherently related to the number of counts present in that region. The number of counts in a region depends, in principle and among other factors, on the total administered activity, scanner sensitivity, image acquisition duration, radiopharmaceutical tracer uptake in the region, and patient local body morphometry surrounding the region. In theory, less amount of denoising operations is needed to denoise a high-count (low relative noise) image than images a low-count (high relative noise) image, and vice versa. The current deep-learning-based methods for PET image denoising are predominantly trained on image appearance only and have no special treatment for images of different noise levels. Our hypothesis is that by explicitly providing the local relative noise level of the input image to a deep convolutional neural network (DCNN), the DCNN can outperform itself trained on image appearance only. To this end, we propose a noise-level-aware framework denoising framework that allows embedding of local noise level into a DCNN. The proposed is trained and tested on 30 and 15 patient PET images acquired on a GE Discovery MI PET/CT system. Our experiments showed that the increases in both PSNR and SSIM from our backbone network with relative noise level embedding (NLE) versus the same network without NLE were statistically significant with p<0.001, and the proposed method significantly outperformed a strong baseline method by a large margin.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Neural KEM: A Kernel Method with Deep Coefficient Prior for PET Image Reconstruction
Authors:
Siqi Li,
Kuang Gong,
Ramsey D. Badawi,
Edward J. Kim,
**yi Qi,
Guobao Wang
Abstract:
Image reconstruction of low-count positron emission tomography (PET) data is challenging. Kernel methods address the challenge by incorporating image prior information in the forward model of iterative PET image reconstruction. The kernelized expectation-maximization (KEM) algorithm has been developed and demonstrated to be effective and easy to implement. A common approach for a further improveme…
▽ More
Image reconstruction of low-count positron emission tomography (PET) data is challenging. Kernel methods address the challenge by incorporating image prior information in the forward model of iterative PET image reconstruction. The kernelized expectation-maximization (KEM) algorithm has been developed and demonstrated to be effective and easy to implement. A common approach for a further improvement of the kernel method would be adding an explicit regularization, which however leads to a complex optimization problem. In this paper, we propose an implicit regularization for the kernel method by using a deep coefficient prior, which represents the kernel coefficient image in the PET forward model using a convolutional neural-network. To solve the maximum-likelihood neural network-based reconstruction problem, we apply the principle of optimization transfer to derive a neural KEM algorithm. Each iteration of the algorithm consists of two separate steps: a KEM step for image update from the projection data and a deep-learning step in the image domain for updating the kernel coefficient image using the neural network. This optimization algorithm is guaranteed to monotonically increase the data likelihood. The results from computer simulations and real patient data have demonstrated that the neural KEM can outperform existing KEM and deep image prior methods.
△ Less
Submitted 24 October, 2022; v1 submitted 4 January, 2022;
originally announced January 2022.
-
The Design and Performance of Charged Particle Detector onboard the GECAM Mission
Authors:
Y. B. Xu,
X. L. Sun,
S. Yang,
X. Q. Li,
W. X. Peng,
K. Gong,
X. H. Liang,
Y. Q. Liu,
D. Y. Guo,
H. Wang,
C. Y. Li,
Z. H. An,
J. J. He,
X. J. Liu,
S. L. Xiong,
X. Y. Wen,
Fan Zhang,
D. L. Zhang,
X. Y. Zhao,
C. Y. Zhang,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du
, et al. (25 additional authors not shown)
Abstract:
The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is us…
▽ More
The Gravitational Wave highly energetic Electromagnetic Counterpart All-sky Monitor (GECAM) is dedicated to detecting gravitational wave gamma-ray bursts. It is capable of all-sky monitoring over and discovering gamma-ray bursts and new radiation phenomena. GECAM consists of two microsatellites, each equipped with 8 charged particle detectors (CPDs) and 25 gamma-ray detectors (GRDs). The CPD is used to measure charged particles in the space environment, monitor energy and flow intensity changes, and identify between gamma-ray bursts and space charged particle events in conjunction with GRD. CPD uses plastic scintillator as the sensitive material for detection, silicon photomultiplier (SiPM) array as the optically readable device, and the inlaid Am-241 radioactive source as the onboard calibration means. In this paper, we will present the working principle, physical design, functional implementation and preliminary performance test results of the CPD.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Inflight performance of the GECAM Gamma-ray and Charge particle Detectors
Authors:
X. Q. Li,
X. Y. Wen,
S. L. Xiong,
K. Gong,
D. L. Zhang,
Z. H. An,
Y. B. Xu,
Y. Q. Liu,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
M. Gao,
R. Gao,
D. Y. Guo,
J. J. He,
D. J. Hou,
Y. G. Li,
C. Li,
C. Y. Li,
G. Li,
L. Li,
Q. X. Li,
X. F. Li
, et al. (34 additional authors not shown)
Abstract:
The GECAM mission consists of two identical microsatellites (GECAM-A and GECAM-B). Each satellite is equipped with 25 gamma-ray detectors (GRD) and 8 charged particle detectors (CPD). The main scientific objective of the GECAM mission is to detect gamma-ray bursts (GRBs) associated with the gravitational wave events produced by the merging of binary compact stars. After the launch on Dec. 10, 2020…
▽ More
The GECAM mission consists of two identical microsatellites (GECAM-A and GECAM-B). Each satellite is equipped with 25 gamma-ray detectors (GRD) and 8 charged particle detectors (CPD). The main scientific objective of the GECAM mission is to detect gamma-ray bursts (GRBs) associated with the gravitational wave events produced by the merging of binary compact stars. After the launch on Dec. 10, 2020 , we carried out a series of on orbit tests. This paper introduces the test results of the GECAM-B satellite. According to the in-flight performance, the energy band for gamma-ray detection of GECAM-B is from about 7 keV to 3.5 MeV. GECAM-B can achieve prompt localization of GRBs. For the first time, GECAM-B realized a quasi-real-time transmission of trigger information using Beidou-3 RDSS. Keywords GECAM, gamma-ray burst, gravitational wave, GRD, CPD
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Gain stabilization and consistency correction approach for multiple SiPM-based gamma-ray detectors on GECAM
Authors:
Dali Zhang,
Xinqiao Li,
Xiangyang Wen,
Shaolin Xiong,
Zhenghua An,
Xilei Sun,
Rui Qiao,
Zhengwei Li,
Ke Gong,
Dongjie Hou,
Yanguo Li,
Xiaohua Liang,
Xiao**g Liu,
Yaqing Liu,
Wenxi Peng,
Sheng Yang,
Fan Zhang,
Xiaoyun Zhao,
Ce Cai,
Chaoyang Li,
Jiacong Liu,
Shuo Xiao,
Chenwei Wang,
Qibin Yi,
Chao Zheng
Abstract:
Each satellite of the Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM, mission) consists of 25 SiPM based gamma-ray detectors (GRDs). Although SiPM based GRD has merits of compact size and low bias-voltage, the drift of the SiPM gain with temperature is a severe problem for GRD performance. An adaptive voltage supply source was designed to automatically adjust the…
▽ More
Each satellite of the Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM, mission) consists of 25 SiPM based gamma-ray detectors (GRDs). Although SiPM based GRD has merits of compact size and low bias-voltage, the drift of the SiPM gain with temperature is a severe problem for GRD performance. An adaptive voltage supply source was designed to automatically adjust the SiPM bias voltage to compensate the temperature effects and keep the gain stable. This approach has been proved to be effective during both the on-ground and in-flight tests. The in-flight measured variation of the SiPM gain is within 2%. To reduce the gain non-uniformity of GRDs, an iterative bias voltage adjustment approach is proposed and implemented. The gain non-uniformity is reduced from 17% to 0.6%. In this paper, the gain stabilization and consistency correction approach are presented and discussed in detail.
△ Less
Submitted 9 December, 2021; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Quality assurance test and Failure Analysis of SiPM Arrays of GECAM Satellites
Authors:
D. L. Zhang,
M. Gao,
X. L. Sun,
X. Q. Li,
Z. H. An,
X. Y. Wen,
C. Cai,
Z. Chang,
G. Chen,
C. Chen,
Y. Y. Du,
R. Gao,
K. Gong,
D. Y. Guo,
J. J. He,
D. J. Hou,
Y. G. Li,
C. Y. Li,
G. Li,
L. Li,
X. F. Li,
M. S. Li,
X. H. Liang,
X. J. Liu,
Y. Q. Liu
, et al. (23 additional authors not shown)
Abstract:
The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) satellite consists of two small satellites. Each GECAM payload contains 25 gamma ray detectors (GRD) and 8 charged particle detectors (CPD). GRD is the main detector which can detect gamma-rays and particles and localize the Gamma-Ray Bursts (GRB),while CPD is used to help GRD to discriminate gamma-ray bursts an…
▽ More
The Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) satellite consists of two small satellites. Each GECAM payload contains 25 gamma ray detectors (GRD) and 8 charged particle detectors (CPD). GRD is the main detector which can detect gamma-rays and particles and localize the Gamma-Ray Bursts (GRB),while CPD is used to help GRD to discriminate gamma-ray bursts and charged particle bursts. The GRD makes use of lanthanum bromide (LaBr3) crystal readout by SiPM. As the all available SiPM devices belong to commercial grade, quality assurance tests need to be performed in accordance with the aerospace specifications. In this paper, we present the results of quality assurance tests, especially a detailed mechanism analysis of failed devices during the development of GECAM. This paper also summarizes the application experience of commercial-grade SiPM devices in aerospace payloads, and provides suggestions for forthcoming SiPM space applications.
△ Less
Submitted 9 December, 2021; v1 submitted 1 September, 2021;
originally announced September 2021.
-
Design and test of a portable Gamma-Ray Burst simulator for GECAM
Authors:
Can Chen,
Shuo Xiao,
Shaolin Xiong,
Nian Yu,
Xiangyang Wen,
Ke Gong,
Xinqiao Li,
Chaoyang Li,
Dongjie Hou,
Xiongtao Yang,
Zijian Zhao,
Yuxuan Zhu,
Dali Zhang,
Zhenghua An,
Xiaoyun Zhao,
Yupeng Xu,
Yusa Wang
Abstract:
The main scientific goal of the Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is to monitor various types of Gamma-Ray Bursts (GRB) originated from merger of binary compact stars, which could also produce gravitational wave, and collapse of massive stars. In order to study the response of GECAM Gamma-Ray Detectors (GRDs) to high-energy bursts and test the in-fl…
▽ More
The main scientific goal of the Gravitational wave high-energy Electromagnetic Counterpart All-sky Monitor (GECAM) is to monitor various types of Gamma-Ray Bursts (GRB) originated from merger of binary compact stars, which could also produce gravitational wave, and collapse of massive stars. In order to study the response of GECAM Gamma-Ray Detectors (GRDs) to high-energy bursts and test the in-flight trigger and localization software of GECAM before the launch, a portable GRB simulator device is designed and implemented based on grid controlled X-ray tube (GCXT) and direct digital synthesis (DDS) technologies. The design of this GRB simulator which modulates X-ray flux powered by high voltage up to 20 kV is demonstrated, and the time jitter (FWHM) of the device is about 0.9 $μ$s. Before the launch in December, 2020, both two GECAM satellites were irradiated by different types of GRBs (including short and long bursts in duration) generated by this GRB simulator. The light curves detected with GECAM/GRDs are consistent with the programmed input functions within statistical uncertainties, indicating the good performance of both the GRDs and the GRB simulator.
△ Less
Submitted 10 July, 2021; v1 submitted 26 June, 2021;
originally announced June 2021.
-
Direct Reconstruction of Linear Parametric Images from Dynamic PET Using Nonlocal Deep Image Prior
Authors:
Kuang Gong,
Ciprian Catana,
**yi Qi,
Quanzheng Li
Abstract:
Direct reconstruction methods have been developed to estimate parametric images directly from the measured PET sinograms by combining the PET imaging model and tracer kinetics in an integrated framework. Due to limited counts received, signal-to-noise-ratio (SNR) and resolution of parametric images produced by direct reconstruction frameworks are still limited. Recently supervised deep learning me…
▽ More
Direct reconstruction methods have been developed to estimate parametric images directly from the measured PET sinograms by combining the PET imaging model and tracer kinetics in an integrated framework. Due to limited counts received, signal-to-noise-ratio (SNR) and resolution of parametric images produced by direct reconstruction frameworks are still limited. Recently supervised deep learning methods have been successfully applied to medical imaging denoising/reconstruction when large number of high-quality training labels are available. For static PET imaging, high-quality training labels can be acquired by extending the scanning time. However, this is not feasible for dynamic PET imaging, where the scanning time is already long enough. In this work, we proposed an unsupervised deep learning framework for direct parametric reconstruction from dynamic PET, which was tested on the Patlak model and the relative equilibrium Logan model. The patient's anatomical prior image, which is readily available from PET/CT or PET/MR scans, was supplied as the network input to provide a manifold constraint, and also utilized to construct a kernel layer to perform non-local feature denoising. The linear kinetic model was embedded in the network structure as a 1x1 convolution layer. The training objective function was based on the PET statistical model. Evaluations based on dynamic datasets of 18F-FDG and 11C-PiB tracers show that the proposed framework can outperform the traditional and the kernel method-based direct reconstruction methods.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Super Resolution of Arterial Spin Labeling MR Imaging Using Unsupervised Multi-Scale Generative Adversarial Network
Authors:
Jianan Cui,
Kuang Gong,
Paul Han,
Huafeng Liu,
Quanzheng Li
Abstract:
Arterial spin labeling (ASL) magnetic resonance imaging (MRI) is a powerful imaging technology that can measure cerebral blood flow (CBF) quantitatively. However, since only a small portion of blood is labeled compared to the whole tissue volume, conventional ASL suffers from low signal-to-noise ratio (SNR), poor spatial resolution, and long acquisition time. In this paper, we proposed a super-res…
▽ More
Arterial spin labeling (ASL) magnetic resonance imaging (MRI) is a powerful imaging technology that can measure cerebral blood flow (CBF) quantitatively. However, since only a small portion of blood is labeled compared to the whole tissue volume, conventional ASL suffers from low signal-to-noise ratio (SNR), poor spatial resolution, and long acquisition time. In this paper, we proposed a super-resolution method based on a multi-scale generative adversarial network (GAN) through unsupervised training. The network only needs the low-resolution (LR) ASL image itself for training and the T1-weighted image as the anatomical prior. No training pairs or pre-training are needed. A low-pass filter guided item was added as an additional loss to suppress the noise interference from the LR ASL image. After the network was trained, the super-resolution (SR) image was generated by supplying the upsampled LR ASL image and corresponding T1-weighted image to the generator of the last layer. Performance of the proposed method was evaluated by comparing the peak signal-to-noise ratio (PSNR) and structural similarity index (SSIM) using normal-resolution (NR) ASL image (5.5 min acquisition) and high-resolution (HR) ASL image (44 min acquisition) as the ground truth. Compared to the nearest, linear, and spline interpolation methods, the proposed method recovers more detailed structure information, reduces the image noise visually, and achieves the highest PSNR and SSIM when using HR ASL image as the ground-truth.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Clinically Translatable Direct Patlak Reconstruction from Dynamic PET with Motion Correction Using Convolutional Neural Network
Authors:
Nuobei Xie,
Kuang Gong,
Ning Guo,
Zhixing Qin,
Jianan Cui,
Zhifang Wu,
Huafeng Liu,
Quanzheng Li
Abstract:
Patlak model is widely used in 18F-FDG dynamic positron emission tomography (PET) imaging, where the estimated parametric images reveal important biochemical and physiology information. Because of better noise modeling and more information extracted from raw sinogram, direct Patlak reconstruction gains its popularity over the indirect approach which utilizes reconstructed dynamic PET images alone.…
▽ More
Patlak model is widely used in 18F-FDG dynamic positron emission tomography (PET) imaging, where the estimated parametric images reveal important biochemical and physiology information. Because of better noise modeling and more information extracted from raw sinogram, direct Patlak reconstruction gains its popularity over the indirect approach which utilizes reconstructed dynamic PET images alone. As the prerequisite of direct Patlak methods, raw data from dynamic PET are rarely stored in clinics and difficult to obtain. In addition, the direct reconstruction is time-consuming due to the bottleneck of multiple-frame reconstruction. All of these impede the clinical adoption of direct Patlak reconstruction.In this work, we proposed a data-driven framework which maps the dynamic PET images to the high-quality motion-corrected direct Patlak images through a convolutional neural network. For the patient motion during the long period of dynamic PET scan, we combined the correction with the backward/forward projection in direct reconstruction to better fit the statistical model. Results based on fifteen clinical 18F-FDG dynamic brain PET datasets demonstrates the superiority of the proposed framework over Gaussian, nonlocal mean and BM4D denoising, regarding the image bias and contrast-to-noise ratio.
△ Less
Submitted 12 September, 2020;
originally announced September 2020.
-
Effects of heterogeneous self-protection awareness on resource-epidemic coevolution dynamics
Authors:
Xiaolong Chen,
Kai Gong,
Ruijie Wang,
Shimin Cai,
Wei Wang
Abstract:
Recent studies have demonstrated that the allocation of individual resources has a significant influence on the dynamics of epidemic spreading. In the real scenario, individuals have a different level of awareness for self-protection when facing the outbreak of an epidemic. To investigate the effects of the heterogeneous self-awareness distribution on the epidemic dynamics, we propose a resource-e…
▽ More
Recent studies have demonstrated that the allocation of individual resources has a significant influence on the dynamics of epidemic spreading. In the real scenario, individuals have a different level of awareness for self-protection when facing the outbreak of an epidemic. To investigate the effects of the heterogeneous self-awareness distribution on the epidemic dynamics, we propose a resource-epidemic coevolution model in this paper. We first study the effects of the heterogeneous distributions of node degree and self-awareness on the epidemic dynamics on artificial networks. Through extensive simulations, we find that the heterogeneity of self-awareness distribution suppresses the outbreak of an epidemic, and the heterogeneity of degree distribution enhances the epidemic spreading. Next, we study how the correlation between node degree and self-awareness affects the epidemic dynamics. The results reveal that when the correlation is positive, the heterogeneity of self-awareness restrains the epidemic spreading. While, when there is a significant negative correlation, strong heterogeneous or strong homogeneous distribution of the self-awareness is not conducive for disease suppression. We find an optimal heterogeneity of self-awareness, at which the disease can be suppressed to the most extent. Further research shows that the epidemic threshold increases monotonously when the correlation changes from most negative to most positive, and a critical value of the correlation coefficient is found. When the coefficient is below the critical value, an optimal heterogeneity of self-awareness exists; otherwise, the epidemic threshold decreases monotonously with the decline of the self-awareness heterogeneity. At last, we verify the results on four typical real-world networks and find that the results on the real-world networks are consistent with those on the artificial network.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
MR-Based PET Attenuation Correction using a Combined Ultrashort Echo Time/Multi-Echo Dixon Acquisition
Authors:
Paul Kyu Han,
Debra E. Horng,
Kuang Gong,
Yoann Petibon,
Kyungsang Kim,
Quanzheng Li,
Keith A. Johnson,
Georges El Fakhri,
**song Ouyang,
Chao Ma
Abstract:
We propose a magnetic resonance (MR)-based method for estimation of continuous linear attenuation coefficients (LAC) in positron emission tomography (PET) using a physical compartmental model and ultrashort echo time (UTE)/multi-echo Dixon (mUTE) acquisitions. Specifically, we propose a three-dimensional (3D) mUTE sequence to acquire signals from water, fat, and short-T2 components (e.g., bones) s…
▽ More
We propose a magnetic resonance (MR)-based method for estimation of continuous linear attenuation coefficients (LAC) in positron emission tomography (PET) using a physical compartmental model and ultrashort echo time (UTE)/multi-echo Dixon (mUTE) acquisitions. Specifically, we propose a three-dimensional (3D) mUTE sequence to acquire signals from water, fat, and short-T2 components (e.g., bones) simultaneously in a single acquisition. The proposed mUTE sequence integrates 3D UTE with multi-echo Dixon acquisitions and uses sparse radial trajectories to accelerate imaging speed. Errors in the radial k-space trajectories are measured using a special k-space trajectory map** sequence and corrected for image reconstruction. A physical compartmental model is used to fit the measured multi-echo MR signals to obtain fractions of water, fat and bone components for each voxel, which are then used to estimate the continuous LAC map for PET attenuation correction. The performance of the proposed method was evaluated via phantom and in vivo human studies, using LACs from Computed Tomography (CT) as reference. Compared to Dixon- and atlas-based MRAC methods, the proposed method yielded PET images with higher correlation and similarity in relation to the reference. The relative absolute errors of PET activity values reconstructed by the proposed method were below 5% in all of the four lobes (frontal, temporal, parietal, occipital), cerebellum, whole white matter and gray matter regions across all subjects (n=6). The proposed mUTE method can generate subject-specific, continuous LAC map for PET attenuation correction in PET/MR.
△ Less
Submitted 2 April, 2020;
originally announced April 2020.
-
Tunable Casimir equilibria with phase change materials: from quantum trap** to its release
Authors:
Lixin Ge,
Xi Shi,
Zijun Xu,
Ke Gong
Abstract:
A stable suspension of nanoscale particles due to the Casimir force is of great interest for many applications such as sensing, non-contract nano-machines. However, the suspension properties are difficult to change once the devices are fabricated. Vanadium dioxide (VO$_2$) is a phase change material, which undergoes a transition from a low-temperature insulating phase to a high-temperature metalli…
▽ More
A stable suspension of nanoscale particles due to the Casimir force is of great interest for many applications such as sensing, non-contract nano-machines. However, the suspension properties are difficult to change once the devices are fabricated. Vanadium dioxide (VO$_2$) is a phase change material, which undergoes a transition from a low-temperature insulating phase to a high-temperature metallic phase around a temperature of 340 K. In this work, we study Casimir forces between a nanoplate (gold or Teflon) and a layered structure containing a VO$_2$ film. It is found that stable Casimir suspensions of nanoplates can be realized in a liquid environment, and the equilibrium distances are determined, not only by the layer thicknesses but also by the matter phases of VO$_2$. Under proper designs, a switch from quantum trap** of the gold nanoplate ("on" state) to its release ("off" state) as a result of the metal-to-insulator transition of VO$_2$, is revealed. On the other hand, the quantum trap** and release of a Teflon nanoplate is found under the insulator-to-metal transition of VO$_2 $. Our findings offer the possibility of designing switchable devices for applications in micro-and nano-electromechanical systems.
△ Less
Submitted 6 January, 2020;
originally announced March 2020.
-
Penalized-likelihood PET Image Reconstruction Using 3D Structural Convolutional Sparse Coding
Authors:
Nuobei Xie,
Kuang Gong,
Ning Guo,
Zhixin Qin,
Zhifang Wu,
Huafeng Liu,
Quanzheng Li
Abstract:
Positron emission tomography (PET) is widely used for clinical diagnosis. As PET suffers from low resolution and high noise, numerous efforts try to incorporate anatomical priors into PET image reconstruction, especially with the development of hybrid PET/CT and PET/MRI systems. In this work, we proposed a novel 3D structural convolutional sparse coding (CSC) concept for penalized-likelihood PET i…
▽ More
Positron emission tomography (PET) is widely used for clinical diagnosis. As PET suffers from low resolution and high noise, numerous efforts try to incorporate anatomical priors into PET image reconstruction, especially with the development of hybrid PET/CT and PET/MRI systems. In this work, we proposed a novel 3D structural convolutional sparse coding (CSC) concept for penalized-likelihood PET image reconstruction, named 3D PET-CSC. The proposed 3D PET-CSC takes advantage of the convolutional operation and manages to incorporate anatomical priors without the need of registration or supervised training. As 3D PET-CSC codes the whole 3D PET image, instead of patches, it alleviates the staircase artifacts commonly presented in traditional patch-based sparse coding methods. Moreover, we developed the residual-image and order-subset mechanisms to further reduce the computational cost and accelerate the convergence for the proposed 3D PET-CSC method. Experiments based on computer simulations and clinical datasets demonstrate the superiority of 3D PET-CSC compared with other reference methods.
△ Less
Submitted 15 December, 2019;
originally announced December 2019.
-
Magnetically tunable multi-band near-field radiative heat transfer between two graphene sheets
Authors:
Lixin Ge,
Ke Gong,
Yu** Cang,
Yongsong Luo,
Xi Shi,
Ying Wu
Abstract:
Near-field radiative heat transfer (NFRHT) is strongly related with many applications such as near-field imaging, thermos-photovoltaics and thermal circuit devices. The active control of NFRHT is of great interest since it provides a degree of tunability by external means. In this work, a magnetically tunable multi-band NFRHT is revealed in a system of two suspended graphene sheets at room tempera…
▽ More
Near-field radiative heat transfer (NFRHT) is strongly related with many applications such as near-field imaging, thermos-photovoltaics and thermal circuit devices. The active control of NFRHT is of great interest since it provides a degree of tunability by external means. In this work, a magnetically tunable multi-band NFRHT is revealed in a system of two suspended graphene sheets at room temperature. It is found that the single-band spectra for B=0 split into multi-band spectra under an external magnetic field. Dual-band spectra can be realized for a modest magnetic field (e.g., B=4 T). One band is determined by intra-band transitions in the classical regime, which undergoes a blue shift as the chemical potential increases. Meanwhile, the other band is contributed by inter-Landau-level transitions in the quantum regime, which is robust against the change of chemical potentials. For a strong magnetic field (e.g., B=15 T), there is an additional band with the resonant peak appearing at near-zero frequency (microwave regime), stemming from the magneto-plasmon zero modes. The great enhancement of NFRHT at such low frequency has not been found in any previous systems yet. This work may pave a way for multi-band thermal information transfer based on atomically thin graphene sheets.
△ Less
Submitted 27 December, 2018;
originally announced December 2018.
-
The healing strategy by prioritizing minimum degree against localized attacks on interdependent spatially embedded networks
Authors:
Kai Gong,
Jia-Jian Wu,
Qing Li,
Yi-Xin Zhu
Abstract:
Many real infrastructure networks, such as power grids and communication networks, are not only depend on one another to function, but also embedded in space. A lot of works have been devoted to reveal the vulnerability of interdependent spatially embedded networks considers random failures. However, recently research show that they are susceptible to geographically localized attacks or failures c…
▽ More
Many real infrastructure networks, such as power grids and communication networks, are not only depend on one another to function, but also embedded in space. A lot of works have been devoted to reveal the vulnerability of interdependent spatially embedded networks considers random failures. However, recently research show that they are susceptible to geographically localized attacks or failures cased by natural disasters or terrorist attacks, which affect all nodes within a given radius. In particular, small localized attacks may lead to catastrophic consequences. As a remedy of the collapse instability, one research introduced a dynamic healing strategy and the possibility of new connectivity link with a probability, called random healing, to bridge two remaining neighbors of a failed node. The random strategy is straightforward. Here, unlike previous strategy, we propose a simple but effective strategy, called healing strategy by prioritizing minimum degree(HPMD), which establishing a new link between two functioning neighbors with minimum degree during the cascading failures. In addition, we consider the distance between two nodes to avoid change the network structures. Afterwards, a comparison is made between HPMD and three healing strategies: random, degree centrality and local centrality to identify which a pair of neighbors have high priority. Simulation experiments are presented for two square lattices with the same size as interdependent spatially embedded networks under localized attacks. Results demonstrated that HPMD strategy has an outstanding performance against localized attacks, even when ratio of healing is vary. Moreover, HPMD is more timely, more applicability and costless. Our method is meaningful in practice as it can greatly enhance the resilience and robustness of interdependent spatially embedded networks against localized attacks.
△ Less
Submitted 21 October, 2018;
originally announced October 2018.
-
Control of near-field radiative heat transfer based on anisotropic 2D materials
Authors:
Lixin Ge,
Yu** Cang,
Ke Gong,
Lihai Zhou,
Daqing Yu,
Yongsong Luo
Abstract:
In this work, we study the near-field radiative heat transfer between two suspended sheets of anisotropic 2D materials. It is found that the radiative heat transfer can be enhanced with orders-of-magnitude over the blackbody limit for nanoscale separation. The enhancement is attributed to the excitation of anisotropic and hyperbolic plasmonic modes. Meanwhile, a large thermal modulation effect, de…
▽ More
In this work, we study the near-field radiative heat transfer between two suspended sheets of anisotropic 2D materials. It is found that the radiative heat transfer can be enhanced with orders-of-magnitude over the blackbody limit for nanoscale separation. The enhancement is attributed to the excitation of anisotropic and hyperbolic plasmonic modes. Meanwhile, a large thermal modulation effect, depending on the twisted angle of principal axes between the upper and bottom sheets of anisotropic 2D materials, is revealed. The near-field radiative heat transfer for different concentrations of electron is demonstrated and the role of hyperbolic plasmonic modes is analyzed. Our finding of radiative heat transfer between anisotropic 2D materials may find promising applications in thermal nano-devices, such as non-contact thermal modulators, thermal lithography, thermos-photovoltaics, etc.
△ Less
Submitted 8 August, 2018; v1 submitted 31 July, 2018;
originally announced July 2018.
-
Learning Personalized Representation for Inverse Problems in Medical Imaging Using Deep Neural Network
Authors:
Kuang Gong,
Kyungsang Kim,
Jianan Cui,
Ning Guo,
Ciprian Catana,
**yi Qi,
Quanzheng Li
Abstract:
Recently deep neural networks have been widely and successfully applied in computer vision tasks and attracted growing interests in medical imaging. One barrier for the application of deep neural networks to medical imaging is the need of large amounts of prior training pairs, which is not always feasible in clinical practice. In this work we propose a personalized representation learning framewor…
▽ More
Recently deep neural networks have been widely and successfully applied in computer vision tasks and attracted growing interests in medical imaging. One barrier for the application of deep neural networks to medical imaging is the need of large amounts of prior training pairs, which is not always feasible in clinical practice. In this work we propose a personalized representation learning framework where no prior training pairs are needed, but only the patient's own prior images. The representation is expressed using a deep neural network with the patient's prior images as network input. We then applied this novel image representation to inverse problems in medical imaging in which the original inverse problem was formulated as a constraint optimization problem and solved using the alternating direction method of multipliers (ADMM) algorithm. Anatomically guided brain positron emission tomography (PET) image reconstruction and image denoising were employed as examples to demonstrate the effectiveness of the proposed framework. Quantification results based on simulation and real datasets show that the proposed personalized representation framework outperform other widely adopted methods.
△ Less
Submitted 4 July, 2018;
originally announced July 2018.
-
In-flight performance of the DAMPE silicon tracker
Authors:
A. Tykhonov,
G. Ambrosi,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
A. Bolognini,
F. Cadoux,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
Y. F. Dong,
M. Duranti,
D. D'Urso,
R. R. Fan,
P. Fusco,
V. Gallo,
M. Gao,
F. Gargano,
S. Garrappa,
K. Gong,
M. Ionica,
D. La Marra,
F. Loparco
, et al. (17 additional authors not shown)
Abstract:
DAMPE (DArk Matter Particle Explorer) is a spaceborne high-energy cosmic ray and gamma-ray detector, successfully launched in December 2015. It is designed to probe astroparticle physics in the broad energy range from few GeV to 100 TeV. The scientific goals of DAMPE include the identification of possible signatures of Dark Matter annihilation or decay, the study of the origin and propagation mech…
▽ More
DAMPE (DArk Matter Particle Explorer) is a spaceborne high-energy cosmic ray and gamma-ray detector, successfully launched in December 2015. It is designed to probe astroparticle physics in the broad energy range from few GeV to 100 TeV. The scientific goals of DAMPE include the identification of possible signatures of Dark Matter annihilation or decay, the study of the origin and propagation mechanisms of cosmic-ray particles, and gamma-ray astronomy. DAMPE consists of four sub-detectors: a plastic scintillator strip detector, a Silicon-Tungsten tracKer-converter (STK), a BGO calorimeter and a neutron detector. The STK is composed of six double layers of single-sided silicon micro-strip detectors interleaved with three layers of tungsten for photon conversions into electron-positron pairs. The STK is a crucial component of DAMPE, allowing to determine the direction of incoming photons, to reconstruct tracks of cosmic rays and to estimate their absolute charge (Z). We present the in-flight performance of the STK based on two years of in-flight DAMPE data, which includes the noise behavior, signal response, thermal and mechanical stability, alignment and position resolution.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
A new charge reconstruction algorithm for the DAMPE silicon microstrip detector
Authors:
Rui Qiao,
Wen-Xi Peng,
Dong-Ya Guo,
Hao Zhao,
Huan-Yu Wang,
Ke Gong,
Fei Zhang
Abstract:
The DArk Matter Particle Explorer (DAMPE) is one of the four satellites within the Strategic Pioneer Research Program in Space Science of the Chinese Academy of Science (CAS). The Silicon-Tungsten Tracker (STK), which is composed of 768 singled-sided silicon microstrip detectors, is one of the four subdetectors in DAMPE, providing track reconstruction and charge identification for relativistic cha…
▽ More
The DArk Matter Particle Explorer (DAMPE) is one of the four satellites within the Strategic Pioneer Research Program in Space Science of the Chinese Academy of Science (CAS). The Silicon-Tungsten Tracker (STK), which is composed of 768 singled-sided silicon microstrip detectors, is one of the four subdetectors in DAMPE, providing track reconstruction and charge identification for relativistic charged particles. The charge response of DAMPE silicon microstrip detectors is complicated, depending on the incident angle and impact position. A new charge reconstruction algorithm for the DAMPE silicon microstrip detector is introduced in this paper. This algorithm can correct the complicated charge response, and was proved applicable by the ion test beam.
△ Less
Submitted 21 December, 2017;
originally announced December 2017.
-
Attenuation correction for brain PET imaging using deep neural network based on dixon and ZTE MR images
Authors:
Kuang Gong,
Jaewon Yang,
Kyungsang Kim,
Georges El Fakhri,
Youngho Seo,
Quanzheng Li
Abstract:
Positron Emission Tomography (PET) is a functional imaging modality widely used in neuroscience studies. To obtain meaningful quantitative results from PET images, attenuation correction is necessary during image reconstruction. For PET/MR hybrid systems, PET attenuation is challenging as Magnetic Resonance (MR) images do not reflect attenuation coefficients directly. To address this issue, we pre…
▽ More
Positron Emission Tomography (PET) is a functional imaging modality widely used in neuroscience studies. To obtain meaningful quantitative results from PET images, attenuation correction is necessary during image reconstruction. For PET/MR hybrid systems, PET attenuation is challenging as Magnetic Resonance (MR) images do not reflect attenuation coefficients directly. To address this issue, we present deep neural network methods to derive the continuous attenuation coefficients for brain PET imaging from MR images. With only Dixon MR images as the network input, the existing U-net structure was adopted and analysis using forty patient data sets shows it is superior than other Dixon based methods. When both Dixon and zero echo time (ZTE) images are available, we have proposed a modified U-net structure, named GroupU-net, to efficiently make use of both Dixon and ZTE information through group convolution modules when the network goes deeper. Quantitative analysis based on fourteen real patient data sets demonstrates that both network approaches can perform better than the standard methods, and the proposed network structure can further reduce the PET quantification error compared to the U-net structure.
△ Less
Submitted 24 May, 2018; v1 submitted 17 December, 2017;
originally announced December 2017.
-
Internal alignment and position resolution of the silicon tracker of DAMPE determined with orbit data
Authors:
A. Tykhonov,
G. Ambrosi,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
A. Bolognini,
F. Cadoux,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
Y. F. Dong,
M. Duranti,
D. D'Urso,
R. R. Fan,
P. Fusco,
V. Gallo,
M. Gao,
F. Gargano,
S. Garrappa,
K. Gong,
M. Ionica,
D. La Marra,
S. J. Lei
, et al. (18 additional authors not shown)
Abstract:
The DArk Matter Particle Explorer (DAMPE) is a space-borne particle detector designed to probe electrons and gamma-rays in the few GeV to 10 TeV energy range, as well as cosmic-ray proton and nuclei components between 10 GeV and 100 TeV. The silicon-tungsten tracker-converter is a crucial component of DAMPE. It allows the direction of incoming photons converting into electron-positron pairs to be…
▽ More
The DArk Matter Particle Explorer (DAMPE) is a space-borne particle detector designed to probe electrons and gamma-rays in the few GeV to 10 TeV energy range, as well as cosmic-ray proton and nuclei components between 10 GeV and 100 TeV. The silicon-tungsten tracker-converter is a crucial component of DAMPE. It allows the direction of incoming photons converting into electron-positron pairs to be estimated, and the trajectory and charge (Z) of cosmic-ray particles to be identified. It consists of 768 silicon micro-strip sensors assembled in 6 double layers with a total active area of 6.6 m$^2$. Silicon planes are interleaved with three layers of tungsten plates, resulting in about one radiation length of material in the tracker. Internal alignment parameters of the tracker have been determined on orbit, with non-showering protons and helium nuclei. We describe the alignment procedure and present the position resolution and alignment stability measurements.
△ Less
Submitted 22 March, 2018; v1 submitted 7 December, 2017;
originally announced December 2017.
-
Highly surface-active Ca(OH)$_2$ monolayer as a CO$_2$ capture material
Authors:
V. Ongun Özçelik,
Kai Gong,
Claire E. White
Abstract:
Greenhouse gas emissions originating from fossil fuel combustion contribute significantly to global warming, and therefore the design of novel materials that efficiently capture CO$_2$ can play a crucial role in solving this challenge. Here, we show that reducing the dimensionality of bulk crystalline portlandite results in a stable monolayer material, named portlandene, that is highly effective a…
▽ More
Greenhouse gas emissions originating from fossil fuel combustion contribute significantly to global warming, and therefore the design of novel materials that efficiently capture CO$_2$ can play a crucial role in solving this challenge. Here, we show that reducing the dimensionality of bulk crystalline portlandite results in a stable monolayer material, named portlandene, that is highly effective at capturing CO$_2$. Based on theoretical analysis comprised of ab-initio quantum mechanical calculations and force-field molecular dynamics simulations, we show that this single-layer phase is robust and maintains its stability even at high temperatures. The chemical activity of portlandene is seen to further increase upon defect engineering of its surface using vacancy sites. Defect-containing portlandene is capable of separating CO and CO$_2$ from a syngas (CO/CO$_2$/H$_2$) stream, yet is inert to water vapor. This selective behavior and the associated mechanisms have been elucidated by examining the electronic structure, local charge distribution and bonding orbitals of portlandene. Additionally, unlike conventional CO$_2$ capturing technologies, the regeneration process of portlandene does not require high temperature heat treatment since it can release the captured CO$_2$ by application of a mild external electric field, making portlandene an ideal CO$_2$ capturing material for both pre- and post-combustion processes.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Drying-Induced Atomic Structural Rearrangements in Sodium-Based Calcium-Alumino-Silicate-Hydrate Gel and the Mitigating Effects of ZrO$_2$ Nanoparticles
Authors:
Kengran Yang,
V. Ongun Özçelik,
Nishant Garg,
Kai Gong,
Claire E. White
Abstract:
Conventional drying of colloidal materials and gels (including cement) can lead to detrimental effects due to the buildup of internal stresses as water evaporates from the nano/microscopic pores. However, the underlying nanoscopic alterations in these gel materials that are, in part, responsible for macroscopically-measured strain values, especially at low relative humidity, remain a topic of open…
▽ More
Conventional drying of colloidal materials and gels (including cement) can lead to detrimental effects due to the buildup of internal stresses as water evaporates from the nano/microscopic pores. However, the underlying nanoscopic alterations in these gel materials that are, in part, responsible for macroscopically-measured strain values, especially at low relative humidity, remain a topic of open debate in the literature. In this study, sodium-based calcium-alumino-silicate-hydrate (C-(N)-A-S-H) gel, the major binding phase of silicate-activated blast furnace slag (one type of low-CO$_2$ cement), is investigated from a drying perspective, since it is known to suffer extensively from drying-induced microcracking. By employing in situ synchrotron X-ray total scattering measurements and pair distribution function (PDF) analysis we show that the significant contributing factor to the strain development in this material at extremely low relative humidity (0%) is the local atomic structural rearrangement of the C-(N)-A-S-H gel, including collapse of interlayer spacing and slight disintegration of the gel. Moreover, analysis of the medium range (1.0 - 2.2 nm) ordering in the PDF data reveals that the PDF-derived strain values are in much closer agreement (same order of magnitude) with the macroscopically measured strain data, compared to previous results based on reciprocal space X-ray diffraction data. From a mitigation standpoint, we show that small amounts of ZrO$_2$ nanoparticles are able to actively reinforce the structure of silicate-activated slag during drying, preventing atomic level strains from develo**. Mechanistically, these nanoparticles induce growth of a silica-rich gel during drying, which, via density functional theory calculations, we show is attributed to the high surface reactivity of tetragonal ZrO$_2$.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Iterative PET Image Reconstruction Using Convolutional Neural Network Representation
Authors:
Kuang Gong,
Jiahui Guan,
Kyungsang Kim,
Xuezhu Zhang,
Georges El Fakhri,
**yi Qi,
Quanzheng Li
Abstract:
PET image reconstruction is challenging due to the ill-poseness of the inverse problem and limited number of detected photons. Recently deep neural networks have been widely and successfully used in computer vision tasks and attracted growing interests in medical imaging. In this work, we trained a deep residual convolutional neural network to improve PET image quality by using the existing inter-…
▽ More
PET image reconstruction is challenging due to the ill-poseness of the inverse problem and limited number of detected photons. Recently deep neural networks have been widely and successfully used in computer vision tasks and attracted growing interests in medical imaging. In this work, we trained a deep residual convolutional neural network to improve PET image quality by using the existing inter-patient information. An innovative feature of the proposed method is that we embed the neural network in the iterative reconstruction framework for image representation, rather than using it as a post-processing tool. We formulate the objective function as a constraint optimization problem and solve it using the alternating direction method of multipliers (ADMM) algorithm. Both simulation data and hybrid real data are used to evaluate the proposed method. Quantification results show that our proposed iterative neural network method can outperform the neural network denoising and conventional penalized maximum likelihood methods.
△ Less
Submitted 9 October, 2017;
originally announced October 2017.
-
The DArk Matter Particle Explorer mission
Authors:
J. Chang,
G. Ambrosi,
Q. An,
R. Asfandiyarov,
P. Azzarello,
P. Bernardini,
B. Bertucci,
M. S. Cai,
M. Caragiulo,
D. Y. Chen,
H. F. Chen,
J. L. Chen,
W. Chen,
M. Y. Cui,
T. S. Cui,
A. D'Amone,
A. De Benedittis,
I. De Mitri,
M. Di Santo,
J. N. Dong,
T. K. Dong,
Y. F. Dong,
Z. X. Dong,
G. Donvito,
D. Droz
, et al. (139 additional authors not shown)
Abstract:
The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives…
▽ More
The DArk Matter Particle Explorer (DAMPE), one of the four scientific space science missions within the framework of the Strategic Pioneer Program on Space Science of the Chinese Academy of Sciences, is a general purpose high energy cosmic-ray and gamma-ray observatory, which was successfully launched on December 17th, 2015 from the Jiuquan Satellite Launch Center. The DAMPE scientific objectives include the study of galactic cosmic rays up to $\sim 10$ TeV and hundreds of TeV for electrons/gammas and nuclei respectively, and the search for dark matter signatures in their spectra. In this paper we illustrate the layout of the DAMPE instrument, and discuss the results of beam tests and calibrations performed on ground. Finally we present the expected performance in space and give an overview of the mission key scientific goals.
△ Less
Submitted 14 September, 2017; v1 submitted 26 June, 2017;
originally announced June 2017.
-
Charge reconstruction study of the DAMPE Silicon-Tungsten Tracker with ion beams
Authors:
Rui Qiao,
Wen-Xi Peng,
Dong-Ya Guo,
Hao Zhao,
Huan-Yu Wang,
Ke Gong,
Fei Zhang,
Xin Wu,
Phillip Azzarello,
Andrii Tykhonov,
Ruslan Asfandiyarov,
Valentina Gallo,
Giovanni Ambrosi,
Nicola Mazziotta,
Ivan De Mitri
Abstract:
The DArk Matter Particle Explorer (DAMPE) is one of the four satellites within Strategic Pioneer Research Program in Space Science of the Chinese Academy of Science (CAS). DAMPE can detect electrons, photons in a wide energy range (5 GeV to 10 TeV) and ions up to iron (100GeV to 100 TeV). Silicon-Tungsten Tracker (STK) is one of the four subdetectors in DAMPE, providing photon-electron conversion,…
▽ More
The DArk Matter Particle Explorer (DAMPE) is one of the four satellites within Strategic Pioneer Research Program in Space Science of the Chinese Academy of Science (CAS). DAMPE can detect electrons, photons in a wide energy range (5 GeV to 10 TeV) and ions up to iron (100GeV to 100 TeV). Silicon-Tungsten Tracker (STK) is one of the four subdetectors in DAMPE, providing photon-electron conversion, track reconstruction and charge identification for ions. Ion beam test was carried out in CERN with 60GeV/u Lead primary beams. Charge reconstruction and charge resolution of STK detectors were investigated.
△ Less
Submitted 27 May, 2017;
originally announced May 2017.
-
Design of the readout electronics for the DAMPE Silicon Tracker detector
Authors:
Fei Zhang,
Wen-Xi Peng,
Ke Gong,
Di Wu,
Yi-Fan Dong,
Rui Qiao,
Rui-Rui Fan,
**-Zhou Wang,
Huan-Yu Wang,
Xin Wu,
Daniel La Marra,
Philipp Azzarello,
Valentina Gallo,
Giovanni Ambrosi,
Andrea Nardinocchi
Abstract:
The Silicon Tracker (STK) is a detector of the DAMPE satellite to measure the incidence direction of high energy cosmic ray. It consists of 6 X-Y double layers of silicon micro-strip detectors with 73,728 readout channels. It's a great challenge to readout the channels and process the huge volume of data in the critical space environment. 1152 Application Specific Integrated Circuits (ASIC) and 38…
▽ More
The Silicon Tracker (STK) is a detector of the DAMPE satellite to measure the incidence direction of high energy cosmic ray. It consists of 6 X-Y double layers of silicon micro-strip detectors with 73,728 readout channels. It's a great challenge to readout the channels and process the huge volume of data in the critical space environment. 1152 Application Specific Integrated Circuits (ASIC) and 384 ADCs are adopted to readout the detector channels. The 192 Tracker Front-end Hybrid (TFH) modules and 8 identical Tracker Readout Board (TRB) modules are designed to control and digitalize the front signals. In this paper, the design of the readout electronics for STK and its performance will be presented in detail.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
Identifying Influential Spreaders of Epidemics on Community Networks
Authors:
Shi-Long Luo,
Kai Gong,
Li Kang
Abstract:
An efficient strategy for the identification of influential spreaders that could be used to control epidemics within populations would be of considerable importance. Generally, populations are characterized by its community structures and by the heterogeneous distributions of weak ties among nodes bridging over communities. A strategy for community networks capable of identifying influential sprea…
▽ More
An efficient strategy for the identification of influential spreaders that could be used to control epidemics within populations would be of considerable importance. Generally, populations are characterized by its community structures and by the heterogeneous distributions of weak ties among nodes bridging over communities. A strategy for community networks capable of identifying influential spreaders that accelerate the spread of disease is here proposed. In this strategy, influential spreaders serve as target nodes. This is based on the idea that, in k-shell decomposition, weak ties and strong ties are processed separately. The strategy was used on empirical networks constructed from online social networks, and results indicated that this strategy is more accurate than other strategies. Its effectiveness stems from the patterns of connectivity among neighbors, and it successfully identified the important nodes. In addition, the performance of the strategy remained robust even when there were errors in the structure of the network.
△ Less
Submitted 28 January, 2016;
originally announced January 2016.
-
DAMPE silicon tracker on-board data compression algorithm
Authors:
Yifan Dong,
Fei Zhang,
Rui Qiao,
Wenxi Peng,
Ruirui Fan,
Ke Gong,
Di Wu,
Huanyu Wang
Abstract:
The Dark Matter Particle Explorer (DAMPE) is an upcoming scientific satellite mission for high energy gamma-ray, electron and cosmic rays detection. The silicon tracker (STK) is a sub detector of the DAMPE payload with an excellent position resolution (readout pitch of 242um), which measures the incident direction of particles, as well as charge. The STK consists 12 layers of Silicon Micro-strip D…
▽ More
The Dark Matter Particle Explorer (DAMPE) is an upcoming scientific satellite mission for high energy gamma-ray, electron and cosmic rays detection. The silicon tracker (STK) is a sub detector of the DAMPE payload with an excellent position resolution (readout pitch of 242um), which measures the incident direction of particles, as well as charge. The STK consists 12 layers of Silicon Micro-strip Detector (SMD), equivalent to a total silicon area of 6.5m$^2$. The total readout channels of the STK are 73728, which leads to a huge amount of raw data to be dealt. In this paper, we focus on the on-board data compression algorithm and procedure in the STK, which was initially verified by cosmic-ray measurements.
△ Less
Submitted 2 March, 2015;
originally announced March 2015.
-
The silicon matrix for the prototype for the Dark Matter Particle Explorer
Authors:
R. R. Fan,
F. Zhang,
W. X. Peng,
Y. F. Dong,
K. Gong,
S. Yang,
D. Y. Guo,
J. Z. Wang,
M. Gao,
X. H. Liang,
J. Y. Zhang,
X. Z. Cui,
Y. Q. Liu,
H. Y. Wang
Abstract:
A new generation detector for the high energy cosmic ray - the DAMPE(DArk Matter Particle Explorer) is a satellite based project. Its main object is the measurement of energy spectrum of cosmic ray nuclei from 100GeV to 100TeV, the high energy electrons and gamma ray from 5GeV to 10TeV. A silicon matrix detector described in this paper, is employed for the sea level cosmic ray energy and position…
▽ More
A new generation detector for the high energy cosmic ray - the DAMPE(DArk Matter Particle Explorer) is a satellite based project. Its main object is the measurement of energy spectrum of cosmic ray nuclei from 100GeV to 100TeV, the high energy electrons and gamma ray from 5GeV to 10TeV. A silicon matrix detector described in this paper, is employed for the sea level cosmic ray energy and position detection while the prototype testing of the DAMPE. This matrix is composed by the 180 silicon PIN detectors, which covers an area of 32*20 cm2. The primary testing results are shown including MIPs energy spectrum and the position sensitive map.
△ Less
Submitted 19 May, 2014; v1 submitted 7 March, 2014;
originally announced March 2014.
-
Preliminary Study on the RF tuning of CSNS DTL
Authors:
Xuejun Yin,
Ahong Li,
Yongchuang Xiao,
Qiang Chen,
Huachang Liu,
Keyun Gong,
Shinan Fu
Abstract:
In the R&D of the CSNS Drift Tube Linac (DTL), the first unit tank with 28 drift tubes has been developed. The axial accelerating field is ramped from 2.2MV/m to 3.1MV/m in this tank. The required field flatness is less than 2 % with the standard deviation of 1 % for the beam dynamics. And the field stability should be less than 1% for machine stable operation. After the successful alignment, the…
▽ More
In the R&D of the CSNS Drift Tube Linac (DTL), the first unit tank with 28 drift tubes has been developed. The axial accelerating field is ramped from 2.2MV/m to 3.1MV/m in this tank. The required field flatness is less than 2 % with the standard deviation of 1 % for the beam dynamics. And the field stability should be less than 1% for machine stable operation. After the successful alignment, the RF tuning was carried out focusing on the field profile measurement. Four slug tuners and 11 post couplers were applied in this procedure. The ramped filed and required stability had been achieved by fine adjustment of the slug tuners and post couplers. In this paper, the preliminary tuning results are presented and discussed.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
Effects of Weak Ties on Epidemic Predictability in Community Networks
Authors:
Panpan Shu,
Ming Tang,
Kai Gong,
Ying Liu
Abstract:
Weak ties play a significant role in the structures and the dynamics of community networks. Based on the susceptible-infected model in contact process, we study numerically how weak ties influence the predictability of epidemic dynamics. We first investigate the effects of different kinds of weak ties on the variabilities of both the arrival time and the prevalence of disease, and find that the br…
▽ More
Weak ties play a significant role in the structures and the dynamics of community networks. Based on the susceptible-infected model in contact process, we study numerically how weak ties influence the predictability of epidemic dynamics. We first investigate the effects of different kinds of weak ties on the variabilities of both the arrival time and the prevalence of disease, and find that the bridgeness with small degree can enhance the predictability of epidemic spreading. Once weak ties are settled, compared with the variability of arrival time, the variability of prevalence displays a diametrically opposed changing trend with both the distance of the initial seed to the bridgeness and the degree of the initial seed. More specifically, the further distance and the larger degree of the initial seed can induce the better predictability of arrival time and the worse predictability of prevalence. Moreover, we discuss the effects of weak tie number on the epidemic variability. As community strength becomes very strong, which is caused by the decrease of weak tie number, the epidemic variability will change dramatically. Compared with the case of hub seed and random seed, the bridgenss seed can result in the worst predictability of arrival time and the best predictability of prevalence. These results show that the variability of arrival time always marks a complete reversal trend of that of prevalence, which implies it is impossible to predict epidemic spreading in the early stage of outbreaks accurately.
△ Less
Submitted 4 July, 2012;
originally announced July 2012.
-
Variability of Contact Process in Complex Networks
Authors:
Kai Gong,
Ming Tang,
Hui Yang,
Mingsheng Shang
Abstract:
We study numerically how the structures of distinct networks influence the epidemic dynamics in contact process. We first find that the variability difference between homogeneous and heterogeneous networks is very narrow, although the heterogeneous structures can induce the lighter prevalence. Contrary to non-community networks, strong community structures can cause the secondary outbreak of preva…
▽ More
We study numerically how the structures of distinct networks influence the epidemic dynamics in contact process. We first find that the variability difference between homogeneous and heterogeneous networks is very narrow, although the heterogeneous structures can induce the lighter prevalence. Contrary to non-community networks, strong community structures can cause the secondary outbreak of prevalence and two peaks of variability appeared. Especially in the local community, the extraordinarily large variability in early stage of the outbreak makes the prediction of epidemic spreading hard. Importantly, the bridgeness plays a significant role in the predictability, meaning the further distance of the initial seed to the bridgeness, the less accurate the predictability is. Also, we investigate the effect of different disease reaction mechanisms on variability, and find that the different reaction mechanisms will result in the distinct variabilities at the end of epidemic spreading.
△ Less
Submitted 3 April, 2012;
originally announced April 2012.