-
SkyCURTAINs: Model agnostic search for Stellar Streams with Gaia data
Authors:
Debajyoti Sengupta,
Stephen Mulligan,
David Shih,
John Andrew Raine,
Tobias Golling
Abstract:
We present SkyCURTAINs, a data driven and model agnostic method to search for stellar streams in the Milky Way galaxy using data from the Gaia telescope. SkyCURTAINs is a weakly supervised machine learning algorithm that builds a background enriched template in the signal region by leveraging the correlation of the source's characterising features with their proper motion in the sky. This allows f…
▽ More
We present SkyCURTAINs, a data driven and model agnostic method to search for stellar streams in the Milky Way galaxy using data from the Gaia telescope. SkyCURTAINs is a weakly supervised machine learning algorithm that builds a background enriched template in the signal region by leveraging the correlation of the source's characterising features with their proper motion in the sky. This allows for a more representative template of the background in the signal region, and reduces the false positives in the search for stellar streams. The minimal model assumptions in the SkyCURTAINs method allow for a flexible and efficient search for various kinds of anomalies such as streams, globular clusters, or dwarf galaxies directly from the data. We test the performance of SkyCURTAINs on the GD-1 stream and show that it is able to recover the stream with a purity of 75.4% which is an improvement of over 10% over existing machine learning based methods while retaining a signal efficiency of 37.9%.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Cluster Scanning: a novel approach to resonance searches
Authors:
Ivan Oleksiyuk,
John Andrew Raine,
Michael Krämer,
Svyatoslav Voloshynovskiy,
Tobias Golling
Abstract:
We propose a new model-independent method for new physics searches called Cluster Scanning. It uses the k-means algorithm to perform clustering in the space of low-level event or jet observables, and separates potentially anomalous clusters to construct a signal-enriched region. The spectra of a selected observable (e.g. invariant mass) in these two regions are then used to determine whether a res…
▽ More
We propose a new model-independent method for new physics searches called Cluster Scanning. It uses the k-means algorithm to perform clustering in the space of low-level event or jet observables, and separates potentially anomalous clusters to construct a signal-enriched region. The spectra of a selected observable (e.g. invariant mass) in these two regions are then used to determine whether a resonant signal is present. A pseudo-analysis on the LHC Olympics dataset with a $Z'$ resonance shows that Cluster Scanning outperforms the widely used 4-parameter functional background fitting procedures, reducing the number of signal events needed to reach a $3σ$ significant access by a factor of 0.61. Emphasis is placed on the speed of the method, which allows the test statistic to be calibrated on synthetic data.
△ Less
Submitted 21 May, 2024; v1 submitted 27 February, 2024;
originally announced February 2024.
-
Masked Particle Modeling on Sets: Towards Self-Supervised High Energy Physics Foundation Models
Authors:
Lukas Heinrich,
Tobias Golling,
Michael Kagan,
Samuel Klein,
Matthew Leigh,
Margarita Osadchy,
John Andrew Raine
Abstract:
We propose masked particle modeling (MPM) as a self-supervised method for learning generic, transferable, and reusable representations on unordered sets of inputs for use in high energy physics (HEP) scientific data. This work provides a novel scheme to perform masked modeling based pre-training to learn permutation invariant functions on sets. More generally, this work provides a step towards bui…
▽ More
We propose masked particle modeling (MPM) as a self-supervised method for learning generic, transferable, and reusable representations on unordered sets of inputs for use in high energy physics (HEP) scientific data. This work provides a novel scheme to perform masked modeling based pre-training to learn permutation invariant functions on sets. More generally, this work provides a step towards building large foundation models for HEP that can be generically pre-trained with self-supervised learning and later fine-tuned for a variety of down-stream tasks. In MPM, particles in a set are masked and the training objective is to recover their identity, as defined by a discretized token representation of a pre-trained vector quantized variational autoencoder. We study the efficacy of the method in samples of high energy jets at collider physics experiments, including studies on the impact of discretization, permutation invariance, and ordering. We also study the fine-tuning capability of the model, showing that it can be adapted to tasks such as supervised and weakly supervised jet classification, and that the model can transfer efficiently with small fine-tuning data sets to new classes and new data domains.
△ Less
Submitted 25 January, 2024; v1 submitted 24 January, 2024;
originally announced January 2024.
-
Improving new physics searches with diffusion models for event observables and jet constituents
Authors:
Debajyoti Sengupta,
Matthew Leigh,
John Andrew Raine,
Samuel Klein,
Tobias Golling
Abstract:
We introduce a new technique called Drapes to enhance the sensitivity in searches for new physics at the LHC. By training diffusion models on side-band data, we show how background templates for the signal region can be generated either directly from noise, or by partially applying the diffusion process to existing data. In the partial diffusion case, data can be drawn from side-band regions, with…
▽ More
We introduce a new technique called Drapes to enhance the sensitivity in searches for new physics at the LHC. By training diffusion models on side-band data, we show how background templates for the signal region can be generated either directly from noise, or by partially applying the diffusion process to existing data. In the partial diffusion case, data can be drawn from side-band regions, with the inverse diffusion performed for new target conditional values, or from the signal region, preserving the distribution over the conditional property that defines the signal region. We apply this technique to the hunt for resonances using the LHCO di-jet dataset, and achieve state-of-the-art performance for background template generation using high level input features. We also show how Drapes can be applied to low level inputs with jet constituents, reducing the model dependence on the choice of input observables. Using jet constituents we can further improve sensitivity to the signal process, but observe a loss in performance where the signal significance before applying any selection is below 4$σ$.
△ Less
Submitted 19 December, 2023; v1 submitted 15 December, 2023;
originally announced December 2023.
-
Flows for Flows: Morphing one Dataset into another with Maximum Likelihood Estimation
Authors:
Tobias Golling,
Samuel Klein,
Radha Mastandrea,
Benjamin Nachman,
John Andrew Raine
Abstract:
Many components of data analysis in high energy physics and beyond require morphing one dataset into another. This is commonly solved via reweighting, but there are many advantages of preserving weights and shifting the data points instead. Normalizing flows are machine learning models with impressive precision on a variety of particle physics tasks. Naively, normalizing flows cannot be used for m…
▽ More
Many components of data analysis in high energy physics and beyond require morphing one dataset into another. This is commonly solved via reweighting, but there are many advantages of preserving weights and shifting the data points instead. Normalizing flows are machine learning models with impressive precision on a variety of particle physics tasks. Naively, normalizing flows cannot be used for morphing because they require knowledge of the probability density of the starting dataset. In most cases in particle physics, we can generate more examples, but we do not know densities explicitly. We propose a protocol called flows for flows for training normalizing flows to morph one dataset into another even if the underlying probability density of neither dataset is known explicitly. This enables a morphing strategy trained with maximum likelihood estimation, a setup that has been shown to be highly effective in related tasks. We study variations on this protocol to explore how far the data points are moved to statistically match the two datasets. Furthermore, we show how to condition the learned flows on particular features in order to create a morphing function for every value of the conditioning feature. For illustration, we demonstrate flows for flows for toy examples as well as a collider physics example involving dijet events
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
The Interplay of Machine Learning--based Resonant Anomaly Detection Methods
Authors:
Tobias Golling,
Gregor Kasieczka,
Claudius Krause,
Radha Mastandrea,
Benjamin Nachman,
John Andrew Raine,
Debajyoti Sengupta,
David Shih,
Manuel Sommerhalder
Abstract:
Machine learning--based anomaly detection (AD) methods are promising tools for extending the coverage of searches for physics beyond the Standard Model (BSM). One class of AD methods that has received significant attention is resonant anomaly detection, where the BSM is assumed to be localized in at least one known variable. While there have been many methods proposed to identify such a BSM signal…
▽ More
Machine learning--based anomaly detection (AD) methods are promising tools for extending the coverage of searches for physics beyond the Standard Model (BSM). One class of AD methods that has received significant attention is resonant anomaly detection, where the BSM is assumed to be localized in at least one known variable. While there have been many methods proposed to identify such a BSM signal that make use of simulated or detected data in different ways, there has not yet been a study of the methods' complementarity. To this end, we address two questions. First, in the absence of any signal, do different methods pick the same events as signal-like? If not, then we can significantly reduce the false-positive rate by comparing different methods on the same dataset. Second, if there is a signal, are different methods fully correlated? Even if their maximum performance is the same, since we do not know how much signal is present, it may be beneficial to combine approaches. Using the Large Hadron Collider (LHC) Olympics dataset, we provide quantitative answers to these questions. We find that there are significant gains possible by combining multiple methods, which will strengthen the search program at the LHC and beyond.
△ Less
Submitted 14 March, 2024; v1 submitted 20 July, 2023;
originally announced July 2023.
-
FETA: Flow-Enhanced Transportation for Anomaly Detection
Authors:
Tobias Golling,
Samuel Klein,
Radha Mastandrea,
Benjamin Nachman
Abstract:
Resonant anomaly detection is a promising framework for model-independent searches for new particles. Weakly supervised resonant anomaly detection methods compare data with a potential signal against a template of the Standard Model (SM) background inferred from sideband regions. We propose a means to generate this background template that uses a flow-based model to create a map** between high-f…
▽ More
Resonant anomaly detection is a promising framework for model-independent searches for new particles. Weakly supervised resonant anomaly detection methods compare data with a potential signal against a template of the Standard Model (SM) background inferred from sideband regions. We propose a means to generate this background template that uses a flow-based model to create a map** between high-fidelity SM simulations and the data. The flow is trained in sideband regions with the signal region blinded, and the flow is conditioned on the resonant feature (mass) such that it can be interpolated into the signal region. To illustrate this approach, we use simulated collisions from the Large Hadron Collider (LHC) Olympics Dataset. We find that our flow-constructed background method has competitive sensitivity with other recent proposals and can therefore provide complementary information to improve future searches.
△ Less
Submitted 14 June, 2023; v1 submitted 21 December, 2022;
originally announced December 2022.
-
SUPA: A Lightweight Diagnostic Simulator for Machine Learning in Particle Physics
Authors:
Atul Kumar Sinha,
Daniele Paliotta,
Bálint Máté,
Sebastian Pina-Otey,
John A. Raine,
Tobias Golling,
François Fleuret
Abstract:
Deep learning methods have gained popularity in high energy physics for fast modeling of particle showers in detectors. Detailed simulation frameworks such as the gold standard Geant4 are computationally intensive, and current deep generative architectures work on discretized, lower resolution versions of the detailed simulation. The development of models that work at higher spatial resolutions is…
▽ More
Deep learning methods have gained popularity in high energy physics for fast modeling of particle showers in detectors. Detailed simulation frameworks such as the gold standard Geant4 are computationally intensive, and current deep generative architectures work on discretized, lower resolution versions of the detailed simulation. The development of models that work at higher spatial resolutions is currently hindered by the complexity of the full simulation data, and by the lack of simpler, more interpretable benchmarks. Our contribution is SUPA, the SUrrogate PArticle propagation simulator, an algorithm and software package for generating data by simulating simplified particle propagation, scattering and shower development in matter. The generation is extremely fast and easy to use compared to Geant4, but still exhibits the key characteristics and challenges of the detailed simulation. We support this claim experimentally by showing that performance of generative models on data from our simulator reflects the performance on a dataset generated with Geant4. The proposed simulator generates thousands of particle showers per second on a desktop machine, a speed up of up to 6 orders of magnitudes over Geant4, and stores detailed geometric information about the shower propagation. SUPA provides much greater flexibility for setting initial conditions and defining multiple benchmarks for the development of models. Moreover, interpreting particle showers as point clouds creates a connection to geometric machine learning and provides challenging and fundamentally new datasets for the field.
The code for SUPA is available at https://github.com/itsdaniele/SUPA.
△ Less
Submitted 21 October, 2022; v1 submitted 10 February, 2022;
originally announced February 2022.
-
MuPix and ATLASPix -- Architectures and Results
Authors:
A. Schöning,
J. Anders,
H. Augustin,
M. Benoit,
N. Berger,
S. Dittmeier,
F. Ehrler,
A. Fehr,
T. Golling,
S. Gonzalez Sevilla,
J. Hammerich,
A. Herkert,
L. Huth,
G. Iacobucci,
D. Immig,
M. Kiehn,
J. Kröger,
F. Meier,
A. Meneses Gonzalez,
A. Miucci,
L. O. S. Noehte,
I. Peric,
M. Prathapan,
T. Rudzki,
R. Schimassek
, et al. (7 additional authors not shown)
Abstract:
High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being dev…
▽ More
High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being developed for LHC applications with a triggered readout. Both variants have a fully monolithic design including state machines, clock circuitries and serial drivers. Several prototypes and design variants were characterised in the lab and in testbeam campaigns to measure efficiencies, noise, time resolution and radiation tolerance. Results from recent MuPix and ATLASPix prototypes are presented and prospects for future improvements are discussed.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
The Tracking Machine Learning challenge : Accuracy phase
Authors:
Sabrina Amrouche,
Laurent Basara,
Paolo Calafiura,
Victor Estrade,
Steven Farrell,
Diogo R. Ferreira,
Liam Finnie,
Nicole Finnie,
Cécile Germain,
Vladimir Vava Gligorov,
Tobias Golling,
Sergey Gorbunov,
Heather Gray,
Isabelle Guyon,
Mikhail Hushchyn,
Vincenzo Innocente,
Moritz Kiehn,
Edward Moyse,
Jean-Francois Puget,
Yuval Reina,
David Rousseau,
Andreas Salzburger,
Andrey Ustyuzhanin,
Jean-Roch Vlimant,
Johan Sokrates Wind
, et al. (2 additional authors not shown)
Abstract:
This paper reports the results of an experiment in high energy physics: using the power of the "crowd" to solve difficult experimental problems linked to tracking accurately the trajectory of particles in the Large Hadron Collider (LHC). This experiment took the form of a machine learning challenge organized in 2018: the Tracking Machine Learning Challenge (TrackML). Its results were discussed at…
▽ More
This paper reports the results of an experiment in high energy physics: using the power of the "crowd" to solve difficult experimental problems linked to tracking accurately the trajectory of particles in the Large Hadron Collider (LHC). This experiment took the form of a machine learning challenge organized in 2018: the Tracking Machine Learning Challenge (TrackML). Its results were discussed at the competition session at the Neural Information Processing Systems conference (NeurIPS 2018). Given 100.000 points, the participants had to connect them into about 10.000 arcs of circles, following the trajectory of particles issued from very high energy proton collisions. The competition was difficult with a dozen front-runners well ahead of a pack. The single competition score is shown to be accurate and effective in selecting the best algorithms from the domain point of view. The competition has exposed a diversity of approaches, with various roles for Machine Learning, a number of which are discussed in the document
△ Less
Submitted 3 May, 2021; v1 submitted 14 April, 2019;
originally announced April 2019.
-
Charge collection characterisation with the Transient Current Technique of the ams H35DEMO CMOS detector after proton irradiation
Authors:
John Anders,
Mathieu Benoit,
Saverio Braccini,
Raimon Casanova,
Hucheng Chen,
Kai Chen,
Francesco Armando di Bello,
Armin Fehr,
Didier Ferrere,
Dean Forshaw,
Tobias Golling,
Sergio Gonzalez-Sevilla,
Giuseppe Iacobucci,
Moritz Kiehn,
Francesco Lanni,
Hongbin Liu,
Lingxin Meng,
Claudia Merlassino,
Antonio Miucci,
Marzio Nessi,
Ivan Perić,
Marco Rimoldi,
D M S Sultan,
Mateus Vincente Barreto Pinto,
Eva Vilella
, et al. (4 additional authors not shown)
Abstract:
This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital.
This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital.
△ Less
Submitted 25 July, 2018;
originally announced July 2018.
-
Machine Learning in High Energy Physics Community White Paper
Authors:
Kim Albertsson,
Piero Altoe,
Dustin Anderson,
John Anderson,
Michael Andrews,
Juan Pedro Araque Espinosa,
Adam Aurisano,
Laurent Basara,
Adrian Bevan,
Wahid Bhimji,
Daniele Bonacorsi,
Bjorn Burkle,
Paolo Calafiura,
Mario Campanelli,
Louis Capps,
Federico Carminati,
Stefano Carrazza,
Yi-fan Chen,
Taylor Childers,
Yann Coadou,
Elias Coniavitis,
Kyle Cranmer,
Claire David,
Douglas Davis,
Andrea De Simone
, et al. (103 additional authors not shown)
Abstract:
Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We d…
▽ More
Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We detail a roadmap for their implementation, software and hardware resource requirements, collaborative initiatives with the data science community, academia and industry, and training the particle physics community in data science. The main objective of the document is to connect and motivate these areas of research and development with the physics drivers of the High-Luminosity Large Hadron Collider and future neutrino experiments and identify the resource needs for their implementation. Additionally we identify areas where collaboration with external communities will be of great benefit.
△ Less
Submitted 16 May, 2019; v1 submitted 8 July, 2018;
originally announced July 2018.
-
Test beam measurement of ams H35 HV-CMOS capacitively coupled pixel sensor prototypes with high-resistivity substrate
Authors:
M. Benoit,
S. Braccini,
R. Casanova,
E. Cavallaro,
H. Chen,
K. Chen,
F. A. Di Bello,
D. Ferrere,
D. Frizzell,
T. Golling,
S. Gonzalez-Sevilla,
S. Grinstein,
G. Iacobucci,
M. Kiehn,
F. Lanni,
H. Liu,
J. Metcalfe,
L. Meng,
C. Merlassino,
A. Miucci,
D. Muenstermann,
M. Nessi,
H. Okawa,
I. Perić,
M. Rimoldi
, et al. (12 additional authors not shown)
Abstract:
In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning fr…
▽ More
In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning from $\mathrm{80}$ to $\mathrm{1000~Ω\cdot cm}$. A glueing process using a high-precision flip-chip machine was developed in order to capacitively couple the sensors to FE-I4 Readout ASIC using a thin layer of epoxy glue with good uniformity over a large surface. The resulting assemblies were measured in beam test at the Fermilab Test Beam Facilities with 120 GeV protons and CERN SPS H8 beamline using 80 GeV pions. The in-time efficiency and tracking properties measured for the different sensor types are shown to be compatible with the ATLAS ITk requirements for its pixel sensors.
△ Less
Submitted 3 December, 2018; v1 submitted 22 December, 2017;
originally announced December 2017.
-
Testbeam results of irradiated ams H18 HV-CMOS pixel sensor prototypes
Authors:
M. Benoit,
S. Braccini,
G. Casse,
H. Chen,
K. Chen,
F. A. Di Bello,
D. Ferrere,
T. Golling,
S. Gonzalez-Sevilla,
G. Iacobucci,
M. Kiehn,
F. Lanni,
H. Liu,
L. Meng,
C. Merlassino,
A. Miucci,
D. Muenstermann,
M. Nessi,
H. Okawa,
I. Peric,
M. Rimoldi,
B. Ristic,
M. Vicente Barrero Pinto,
J. Vossebeld,
M. Weber
, et al. (4 additional authors not shown)
Abstract:
HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the $4^{\mathrm{th}}$ generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the am…
▽ More
HV-CMOS pixel sensors are a promising option for the tracker upgrade of the ATLAS experiment at the LHC, as well as for other future tracking applications in which large areas are to be instrumented with radiation-tolerant silicon pixel sensors. We present results of testbeam characterisations of the $4^{\mathrm{th}}$ generation of Capacitively Coupled Pixel Detectors (CCPDv4) produced with the ams H18 HV-CMOS process that have been irradiated with different particles (reactor neutrons and 18 MeV protons) to fluences between $1\cdot 10^{14}$ and $5\cdot 10^{15}$ 1-MeV-n$_\textrm{eq}$/cm$^2$. The sensors were glued to ATLAS FE-I4 pixel readout chips and measured at the CERN SPS H8 beamline using the FE-I4 beam telescope. Results for all fluences are very encouraging with all hit efficiencies being better than 97% for bias voltages of $85\,$V. The sample irradiated to a fluence of $1\cdot 10^{15}$ n$_\textrm{eq}$/cm$^2$ - a relevant value for a large volume of the upgraded tracker - exhibited 99.7% average hit efficiency. The results give strong evidence for the radiation tolerance of HV-CMOS sensors and their suitability as sensors for the experimental HL-LHC upgrades and future large-area silicon-based tracking detectors in high-radiation environments.
△ Less
Submitted 28 November, 2017; v1 submitted 8 November, 2016;
originally announced November 2016.
-
Results of the 2015 testbeam of a 180 nm AMS High-Voltage CMOS sensor prototype
Authors:
M. Benoit,
J. Bilbao de Mendizabal,
G. Casse,
H. Chen,
K. Chen,
F. A. Di Bello,
D. Ferrere,
T. Golling,
S. Gonzalez-Sevilla,
G. Iacobucci,
F. Lanni,
H. Liu,
F. Meloni,
L. Meng,
A. Miucci,
D. Muenstermann,
M. Nessi,
I. Peric,
M. Rimoldi,
B. Ristic,
M. Vicente Barrero Pinto,
J. Vossebeld,
M. Weber,
W. Wu,
L. Xu
Abstract:
Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of track…
▽ More
Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of tracking efficiency and timing performance, for different threshold and bias conditions, are shown.
△ Less
Submitted 30 June, 2016; v1 submitted 24 March, 2016;
originally announced March 2016.
-
The FE-I4 Telescope for particle tracking in testbeam experiments
Authors:
M. Benoit,
J. Bilbao De Mendizabal,
F. A. Di Bello,
D. Ferrere,
T. Golling,
S. Gonzalez-Sevilla,
G. Iacobucci,
M. Kocian,
D. Muenstermann,
B. Ristic,
A. Sciuccati
Abstract:
A testbeam telescope, based on ATLAS IBL silicon pixel modules, has been built. It comprises six planes of planar silicon sensors with 250 x 50 um^2 pitch, read out by ATLAS FE-I4 chips. In the CERN SPS H8 beamline (180 GeV pi+) a resolution of better than 8 x 12 um^2 at the position of the device under test was achieved. The telescope reached a trigger rate of 6kHz with two measured devices. It i…
▽ More
A testbeam telescope, based on ATLAS IBL silicon pixel modules, has been built. It comprises six planes of planar silicon sensors with 250 x 50 um^2 pitch, read out by ATLAS FE-I4 chips. In the CERN SPS H8 beamline (180 GeV pi+) a resolution of better than 8 x 12 um^2 at the position of the device under test was achieved. The telescope reached a trigger rate of 6kHz with two measured devices. It is mainly designed for studies using FE-I4 based prototypes, but has also been successfully run with independent DAQ systems. Specialised trigger schemes ensure data synchronisation between these external devices and the telescope. A region-of-interest trigger can be formed by setting masks on the first and the last pixel sensor planes. The setup infrastructure provides centrally controlled and monitored high and low voltage power supplies, silicon oil cooling, temperature and humidity sensors and movable stages.
△ Less
Submitted 20 June, 2016; v1 submitted 24 March, 2016;
originally announced March 2016.
-
The ATLAS Data Quality Defect Database System
Authors:
T. Golling,
H. S. Hayward,
P. U. E. Onyisi,
H. J. Stelzer,
P. Waller
Abstract:
The ATLAS experiment at the Large Hadron Collider has implemented a new system for recording information on detector status and data quality, and for transmitting this information to users performing physics analysis. This system revolves around the concept of "defects," which are well-defined, fine-grained, unambiguous occurrences affecting the quality of recorded data. The motivation, implementa…
▽ More
The ATLAS experiment at the Large Hadron Collider has implemented a new system for recording information on detector status and data quality, and for transmitting this information to users performing physics analysis. This system revolves around the concept of "defects," which are well-defined, fine-grained, unambiguous occurrences affecting the quality of recorded data. The motivation, implementation, and operation of this system is described.
△ Less
Submitted 14 May, 2012; v1 submitted 27 October, 2011;
originally announced October 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Alignment of the Pixel and SCT Modules for the 2004 ATLAS Combined Test Beam
Authors:
A. Ahmad,
A. Andreazza,
T. Atkinson,
J. Baines,
A. J. Barr,
R. Beccherle,
P. J. Bell,
J. Bernabeu,
Z. Broklova,
P. A. Bruckman de Renstrom,
D. Cauz,
L. Chevalier,
S. Chouridou,
M. Citterio,
A. Clark,
M. Cobal,
T. Cornelissen,
S. Correard,
M. J. Costa,
D. Costanzo,
S. Cuneo,
M. Dameri,
G. Darbo,
J. B. de Vivie,
B. Di Girolamo
, et al. (104 additional authors not shown)
Abstract:
A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated u…
▽ More
A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated using the known momenta of the beam particles and were shown to yield consistent results among the different alignment approaches. From the residual distributions, it is concluded that the precision attained in the alignment of the silicon modules is of the order of 5 micrometers in their most precise coordinate.
△ Less
Submitted 26 May, 2008;
originally announced May 2008.