-
Proton discrimination in CLYC for fast neutron spectroscopy
Authors:
J. A. Brown,
B. L. Goldblum,
J. M. Gordon,
T. A. Laplace,
T. S. Nagel,
A. Venkatraman
Abstract:
The Cs$_2$LiYCl$_6$:Ce (CLYC) elpasolite scintillator is known for its response to fast and thermal neutrons along with good $γ$-ray energy resolution. While the $^{35}$Cl($n,p$) reaction has been identified as a potential means for CLYC-based fast neutron spectroscopy in the absence of time-of-flight (TOF), previous efforts to functionalize CLYC as a fast neutron spectrometer have been thwarted b…
▽ More
The Cs$_2$LiYCl$_6$:Ce (CLYC) elpasolite scintillator is known for its response to fast and thermal neutrons along with good $γ$-ray energy resolution. While the $^{35}$Cl($n,p$) reaction has been identified as a potential means for CLYC-based fast neutron spectroscopy in the absence of time-of-flight (TOF), previous efforts to functionalize CLYC as a fast neutron spectrometer have been thwarted by the inability to isolate proton interactions from $^{6}$Li($n,α$) and $^{35}$Cl($n,α$) signals. This work introduces a new approach to particle discrimination in CLYC for fission spectrum neutrons using a multi-gate charge integration algorithm that provides excellent separation between protons and heavier charged particles. Neutron TOF data were collected using a $^{252}$Cf source, an array of EJ-309 organic liquid scintillators, and a $^6$Li-enriched CLYC scintillator outfitted with fast electronics. Modal waveforms were constructed corresponding to the different reaction channels, revealing significant differences in the pulse characteristics of protons and heavier charged particles at ultrafast, fast, and intermediate time scales. These findings informed the design of a pulse shape discrimination algorithm, which was validated using the TOF data. This study also proposes an iterative subtraction method to mitigate contributions from confounding reaction channels in proton and heavier charged particle pulse height spectra, opening the door for CLYC-based fast neutron and $γ$-ray spectroscopy while preserving sensitivity to thermal neutron capture signals.
△ Less
Submitted 22 June, 2024;
originally announced June 2024.
-
Global Characterization of a Laser-Generated Neutron Source
Authors:
D. P. Higginson,
R. Lelièvre,
L. Vassura,
M. M. Gugiu,
M. Borghesi,
L. A. Bernstein,
D. L. Bleuel,
B. L. Goldblum,
A. Green,
F. Hannachi,
S. Kar,
S. Kisyov,
L. Quentin,
M. Schroer,
M. Tarisien,
O. Willi,
P. Antici,
F. Negoita,
A. Allaoua,
J. Fuchs
Abstract:
Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons…
▽ More
Laser-driven neutron sources are routinely produced by the interaction of laser-accelerated protons with a converter. They present complementary characteristics to those of conventional accelerator-based neutron sources (e.g. short pulse durations, enabling novel applications like radiography). We present here results from an experiment aimed at performing a global characterization of the neutrons produced using the Titan laser at the Jupiter Laser Facility (Livermore, USA), where protons were accelerated from 23 $μm$ thick plastic targets and directed onto a LiF converter to produce neutrons. For this purpose, several diagnostics were used to measure these neutron emissions, such as CR-39, activation foils, Time-of-Flight detectors and direct measurement of $^{7}$Be residual activity in the LiF converters. The use of these different, independently operating diagnostics enables comparison of the various measurements performed to provide a robust characterization. These measurements led to a neutron yield of $2.10^{9}$ neutrons per shot with a modest angular dependence, close to that simulated.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Characterization of a SiPM-based monolithic neutron scatter camera using dark counts
Authors:
J. Balajthy,
J. Brown,
E. Brubaker,
B. Cabrera-Palmer,
J. Cates,
B. L. Goldblum,
M. Folsom,
P. Hausladen,
K. Keefe,
J. Nattress,
V. Negut,
K. Nishimura,
J. Steele,
K. Ziock
Abstract:
We report on the design and characterization of a prototype monolithic neutron scatter camera that is intended to significantly improve upon the geometrical shortcomings of conventional neutron cameras. The detector consists of a 50 mm $\times$ 56 mm $\times$ 60 mm monolithic block of EJ-204 plastic scintillator instrumented on two faces with arrays of 64 Hamamatsu S13360-6075PE silicon photomulti…
▽ More
We report on the design and characterization of a prototype monolithic neutron scatter camera that is intended to significantly improve upon the geometrical shortcomings of conventional neutron cameras. The detector consists of a 50 mm $\times$ 56 mm $\times$ 60 mm monolithic block of EJ-204 plastic scintillator instrumented on two faces with arrays of 64 Hamamatsu S13360-6075PE silicon photomultipliers (SiPMs). The electronic crosstalk is limited to < 5% between adjacent channels and < 0.1% between all other channel pairs. SiPMs introduce a significantly elevated dark count rate over PMTs, as well as correlated noise from after-pulsing and optical crosstalk. In this article, we characterize the dark count rate and optical crosstalk and present a modified event reconstruction likelihood function that accounts for them. We find that the average dark count rate per SiPM is 4.3 MHz with a standard deviation of 1.5 MHz among devices. The analysis method we employ to measure internal optical crosstalk also naturally yields the mean and width of the single-electron pulse height. We calculate separate contributions to the width of the single-electron pulse-height from electronic noise and avalanche fluctuations. We demonstrate a timing resolution for a single-photon pulse to be 128 ($\pm$4) ps. Finally, coincidence analysis is employed to measure external (pixel-to-pixel) optical crosstalk. We present a map of the average external crosstalk probability between 2-by-4 groups of SiPMs, as well as the in-situ timing characteristics extracted from the coincidence analysis. Further work is needed to characterize the performance of the camera at reconstructing single- and double-site interactions, as well as image reconstruction.
△ Less
Submitted 29 February, 2024; v1 submitted 26 September, 2023;
originally announced September 2023.
-
Absolute light yield of the EJ-204 plastic scintillator
Authors:
J. A. Brown,
T. A. Laplace,
B. L. Goldblum,
J. J. Manfredi,
T. S. Johnson,
F. Moretti,
A. Venkatraman
Abstract:
The absolute light yield of a scintillator, defined as the number of scintillation photons produced per unit energy deposited, is a useful quantity for scintillator development, research, and applications. Yet, literature data on the absolute light yield of organic scintillators are limited. The goal of this work is to assess the suitability of the EJ-204 plastic scintillator from Eljen Technology…
▽ More
The absolute light yield of a scintillator, defined as the number of scintillation photons produced per unit energy deposited, is a useful quantity for scintillator development, research, and applications. Yet, literature data on the absolute light yield of organic scintillators are limited. The goal of this work is to assess the suitability of the EJ-204 plastic scintillator from Eljen Technology to serve as a reference standard for measurements of the absolute light yield of organic scintillators. Four EJ-204 samples were examined: two manufactured approximately four months prior and stored in high-purity nitrogen, and two aged approximately eleven years and stored in ambient air. The scintillator response was measured using a large-area avalanche photodiode calibrated using low energy $γ$-ray and X-ray sources. The product of the quantum efficiency of the photodetector and light collection efficiency of the housing was characterized using an experimentally-benchmarked optical photon simulation. The average absolute light yield of the fresh samples, 9100 $\pm$ 400 photons per MeV, is lower than the manufacturer-reported value of 10400 photons per MeV. Moreover, the aged samples demonstrated significantly lower light yields, deviating from the manufacturer specification by as much as 26\%. These results are consistent with recent work showcasing environmental aging in plastic scintillators and suggest that experimenters should use caution when deploying plastic scintillators in photon counting applications.
△ Less
Submitted 28 May, 2023;
originally announced May 2023.
-
Measurement of proton light yield of water-based liquid scintillator
Authors:
E. J. Callaghan,
B. L. Goldblum,
J. A. Brown,
T. A. Laplace,
J. J. Manfredi,
M. Yeh,
G. D. Orebi Gann
Abstract:
The proton light yield of liquid scintillators is an important property in the context of their use in large-scale neutrino experiments, with direct implications for neutrino-proton scattering measurements and the discrimination of fast neutrons from inverse beta-decay coincidence signals. This work presents the first measurement of the proton light yield of a water-based liquid scintillator (WbLS…
▽ More
The proton light yield of liquid scintillators is an important property in the context of their use in large-scale neutrino experiments, with direct implications for neutrino-proton scattering measurements and the discrimination of fast neutrons from inverse beta-decay coincidence signals. This work presents the first measurement of the proton light yield of a water-based liquid scintillator (WbLS) formulated from 5% linear alkyl benzene (LAB), at energies below 20 MeV, as well as a measurement of the proton light yield of a pure LAB + 2 g/L 2,5-diphenyloxazole (PPO) mixture (LABPPO). The measurements were performed using a double time-of-flight method and a pulsed neutron beam from the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. The proton light yields were measured relative to that of a 477 keV electron. The relative proton light yield of WbLS was approximately 3.8% lower than that of LABPPO, itself exhibiting a relative proton light yield $15-20\%$ higher than previous measurements of an analogous anoxic sample. The observed quenching is not compatible with the Birks model for either material, but is well described with the addition of Chou's bimolecular quenching term.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Simultaneous measurement of organic scintillator response to carbon and proton recoils
Authors:
T. A. Laplace,
B. L. Goldblum,
J. J. Manfredi,
J. A. Brown,
D. L. Bleuel,
C. A. Brand,
G. Gabella,
J. Gordon,
E. Brubaker
Abstract:
Background: Organic scintillators are widely used for neutron detection in both basic nuclear physics and applications. While the proton light yield of organic scintillators has been extensively studied, measurements of the light yield from neutron interactions with carbon nuclei are scarce. Purpose: Demonstrate a new approach for the simultaneous measurement of the proton and carbon light yield o…
▽ More
Background: Organic scintillators are widely used for neutron detection in both basic nuclear physics and applications. While the proton light yield of organic scintillators has been extensively studied, measurements of the light yield from neutron interactions with carbon nuclei are scarce. Purpose: Demonstrate a new approach for the simultaneous measurement of the proton and carbon light yield of organic scintillators. Provide new carbon light yield data for the EJ-309 liquid and EJ-204 plastic organic scintillators. Method: A 33~MeV $^{2}$H$^{+}$ beam from the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory was im**ed upon a 3-mm-thick Be target to produce a high-flux, broad-spectrum neutron beam. The double time-of-flight technique was extended to simultaneously measure the proton and carbon light yield of the organic scintillators, wherein the light output associated with the recoil particle was determined using $np$ and $n$C elastic scattering kinematics. Results: The proton and carbon light yield relations of the EJ-309 liquid and EJ-204 plastic organic scintillators were measured over a recoil energy range of approximately 0.3 to 1~MeV and 2 to 5~MeV, respectively for EJ-309, and 0.2 to 0.5~MeV and 1 to 4~MeV, respectively for EJ-204. Conclusions: These data provide new insight into the ionization quenching effect in organic scintillators and key input for simulation of the response of organic scintillators for both basic science and a broad range of applications.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Proton light yield of fast plastic scintillators for neutron imaging
Authors:
J. J. Manfredi,
B. L. Goldblum,
T. A. Laplace,
G. Gabella,
J. Gordon,
A. O'Brien,
S. Chowdhury,
J. A. Brown,
E. Brubaker
Abstract:
Plastic organic scintillators have been tailored in composition to achieve ultra-fast temporal response, thereby enabling the design and development of fast neutron detection systems with high timing resolution. Eljen Technology's plastic organic scintillators -- EJ-230, EJ-232, and EJ-232Q -- are prospective candidates for use in emerging neutron imaging systems, where fast timing is paramount. T…
▽ More
Plastic organic scintillators have been tailored in composition to achieve ultra-fast temporal response, thereby enabling the design and development of fast neutron detection systems with high timing resolution. Eljen Technology's plastic organic scintillators -- EJ-230, EJ-232, and EJ-232Q -- are prospective candidates for use in emerging neutron imaging systems, where fast timing is paramount. To support the neutron response characterization of these materials, the relative proton light yields of EJ-230, EJ-232, and EJ-232Q were measured at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a broad-spectrum neutron source and a double time-of-flight technique, the proton light yield relations were obtained over a proton recoil energy range of approximately 300 keV to 4 MeV. The EJ-230, EJ-232, and EJ-232Q scintillators exhibited similar proton light yield relations to each other as well as to other plastic scintillators with the same polymer base material. A comparison of the relative proton light yield of different sized cylindrical EJ-232 and EJ-232Q scintillators also revealed consistent results. This work provides key input data for the realistic computational modeling of neutron detection technologies employing these materials, thereby supporting new capabilities in near-field radionuclide detection for national security applications.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Neutron Response of the EJ-254 Boron-Loaded Plastic Scintillator
Authors:
Gino Gabella,
Bethany L. Goldblum,
Thibault A. Laplace,
Juan J. Manfredi,
Joseph Gordon,
Zachary W. Sweger,
Edith Bourret
Abstract:
Organic scintillators doped with capture agents provide a detectable signal for neutrons over a broad energy range. This work characterizes the fast and slow neutron response of EJ-254, an organic plastic scintillator with 5% natural boron loading by weight. For fast neutrons, the primary mechanism for light generation in organic scintillators is n-p elastic scattering. To study the fast neutron r…
▽ More
Organic scintillators doped with capture agents provide a detectable signal for neutrons over a broad energy range. This work characterizes the fast and slow neutron response of EJ-254, an organic plastic scintillator with 5% natural boron loading by weight. For fast neutrons, the primary mechanism for light generation in organic scintillators is n-p elastic scattering. To study the fast neutron response, the proton light yield of EJ-254 was measured at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a broad-spectrum neutron source and a double time-of-flight technique, the EJ-254 proton light yield was obtained over the energy range of approximately 270 keV to 4.5 MeV and determined to be in agreement with other plastic scintillators comprised of the same polymer base. To isolate the slow neutron response, an AmBe source with polyethylene moderator was made incident on the EJ-254 scintillator surrounded by an array of EJ-309 observation detectors. Events in the EJ-254 target coincident with the signature 477.6 keV $γ$ ray (resulting from deexcitation of the residual $^{7}$Li nucleus following boron neutron capture) were identified. Pulse shape discrimination was used to evaluate the temporal differences in the response of EJ-254 scintillation signals arising from $γ$-ray and fast/slow neutron interactions. Clear separation between $γ$-ray and fast neutrons signals was not achieved and the neutron capture feature was observed to overlap both the $γ$-ray and fast neutron bands. Taking into account the electron light nonproportionality, the neutron-capture light yield in EJ-254 was determined to be 89.4$\pm$1.1 keVee.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Comparative scintillation performance of EJ-309, EJ-276, and a novel organic glass
Authors:
T. A. Laplace,
B. L. Goldblum,
J. E. Bevins,
D. L. Bleuel,
E. Bourret,
J. A. Brown,
E. J. Callaghan,
J. S. Carlson,
P. L. Feng,
G. Gabella,
K. P. Harrig,
J. J. Manfredi,
C. Moore,
F. Moretti,
M. Shinner,
A. Sweet,
Z. W. Sweger
Abstract:
An organic glass scintillator developed by Sandia National Laboratories was characterized in terms of its light output and pulse shape discrimination (PSD) properties and compared to commercial liquid (EJ-309) and plastic (EJ-276) organic scintillators. The electron light output was determined through relative comparison of the $^{137}$Cs Compton edge location. The proton light yield was measured…
▽ More
An organic glass scintillator developed by Sandia National Laboratories was characterized in terms of its light output and pulse shape discrimination (PSD) properties and compared to commercial liquid (EJ-309) and plastic (EJ-276) organic scintillators. The electron light output was determined through relative comparison of the $^{137}$Cs Compton edge location. The proton light yield was measured using a double time-of-flight technique at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a tunable broad-spectrum neutron source and an array of pulse-shape-discriminating observation scintillators, a continuous measurement of the proton light yield was performed for EJ-309 (200 keV$-$3.2 MeV), EJ-276 (170 keV$-$4.9 MeV), and the organic glass (50 keV$-$20 MeV). Finally, the PSD properties of the organic glass, EJ-309, and EJ-276 were evaluated using an AmBe source and compared via a figure-of-merit metric. The organic glass exhibited a higher electron light output than both EJ-309 and EJ-276. Its proton light yield and PSD performance were comparable to EJ-309 and superior to that of EJ-276. With these performance characteristics, the organic glass scintillator is well poised to replace current state-of-the-art PSD-capable scintillators in a range of fast neutron detection applications.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
Neutron Spectroscopy for Pulsed Beams with Frame Overlap using a Double Time-of-Flight Technique
Authors:
K. P. Harrig,
B. L. Goldblum,
J. A. Brown,
D. L. Bleuel,
L. A. Bernstein,
J. Bevins,
M. Harasty,
T. A. Laplace,
E. F. Matthews
Abstract:
A new double time-of-flight (dTOF) neutron spectroscopy technique has been developed for pulsed broad spectrum sources with a duty cycle that results in frame overlap, where fast neutrons from a given pulse overtake slower neutrons from previous pulses. Using a tunable beam at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory, neutrons were produced via thick-target breakup of 16 MeV…
▽ More
A new double time-of-flight (dTOF) neutron spectroscopy technique has been developed for pulsed broad spectrum sources with a duty cycle that results in frame overlap, where fast neutrons from a given pulse overtake slower neutrons from previous pulses. Using a tunable beam at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory, neutrons were produced via thick-target breakup of 16 MeV deuterons on a beryllium target in the cyclotron vault. The breakup spectral shape was deduced from a dTOF measurement using an array of EJ-309 organic liquid scintillators. Simulation of the neutron detection efficiency of the scintillator array was performed using both GEANT4 and MCNP6. The efficiency-corrected spectral shape was normalized using a foil activation technique to obtain the energy-dependent flux of the neutron beam at zero degrees with respect to the incoming deuteron beam. The dTOF neutron spectrum was compared to spectra obtained using HEPROW and GRAVEL pulse height spectrum unfolding techniques. While the unfolding and dTOF results exhibit some discrepancies in shape, the integrated flux values agree within two standard deviations. This method obviates neutron time-of-flight spectroscopy challenges posed by pulsed beams with frame overlap and opens new opportunities for pulsed white neutron source facilities.
△ Less
Submitted 30 September, 2020;
originally announced October 2020.
-
FIER: Software for analytical modeling of delayed gamma-ray spectra
Authors:
E. F. Matthews,
B. L. Goldblum,
L. A. Bernstein,
B. J. Quiter,
J. A. Brown,
W. Younes,
J. T. Burke,
S. W. Padgett,
J. J. Ressler,
A. P. Tonchev
Abstract:
A new software package, the Fission Induced Electromagnetic Response (FIER) code, has been developed to analytically predict delayed $γ$-ray spectra following fission. FIER uses evaluated nuclear data and solutions to the Bateman equations to calculate the time-dependent populations of fission products and their decay daughters resulting from irradiation of a fissionable isotope. These populations…
▽ More
A new software package, the Fission Induced Electromagnetic Response (FIER) code, has been developed to analytically predict delayed $γ$-ray spectra following fission. FIER uses evaluated nuclear data and solutions to the Bateman equations to calculate the time-dependent populations of fission products and their decay daughters resulting from irradiation of a fissionable isotope. These populations are then used in the calculation of $γ$-ray emission rates to obtain the corresponding delayed $γ$-ray spectra. FIER output was compared to experimental data obtained by irradiation of a $^{235}$U sample in the Godiva critical assembly. This investigation illuminated discrepancies in the input nuclear data libraries, showcasing the usefulness of FIER as a tool to address nuclear data deficiencies through comparison with experimental data. FIER provides traceability between $γ$-ray emissions and their contributing nuclear species, decay chains, and parent fission fragments, yielding a new capability for the nuclear science community.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Proton Light Yield in Organic Scintillators using a Double Time-of-Flight Technique
Authors:
J. A. Brown,
B. L. Goldblum,
T. A. Laplace,
K. P. Harrig,
L. A. Bernstein,
D. L. Bleuel,
W. Younes,
D. Reyna,
E. Brubaker,
P. Marleau
Abstract:
Recent progress in the development of novel organic scintillators necessitates modern characterization capabilities. As the primary means of energy deposition by neutrons in these materials is n-p elastic scattering, knowledge of the proton light yield is paramount. This work establishes a new model-independent method to continuously measure proton light yield in organic scintillators over a broad…
▽ More
Recent progress in the development of novel organic scintillators necessitates modern characterization capabilities. As the primary means of energy deposition by neutrons in these materials is n-p elastic scattering, knowledge of the proton light yield is paramount. This work establishes a new model-independent method to continuously measure proton light yield in organic scintillators over a broad energy range. Using a deuteron breakup neutron source at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory and an array of organic scintillators, the proton light yield of EJ-301 and EJ-309, commercially available organic liquid scintillators from Eljen Technology, were measured via a double time-of-flight technique. The light yield was determined using a kinematically over-constrained system in the proton energy range of 1-20 MeV. The effect of pulse integration length on the magnitude and shape of the proton light yield relation was also explored. This work enables accurate simulation of the performance of advanced neutron detectors and supports the development of next-generation neutron imaging systems.
△ Less
Submitted 4 October, 2020;
originally announced October 2020.
-
Scintillator light yield measurements with waveform digitizers
Authors:
T. A. Laplace,
B. L. Goldblum,
J. A. Brown,
J. J. Manfredi
Abstract:
The proton light yield of organic scintillators has been measured extensively in recent years using fast waveform digitizers and large discrepancies exist in the values reported by different authors. In this letter, we address principles of digital signal processing that must be considered when conducting scintillator light yield measurements. Digitized waveform pulse height values are only propor…
▽ More
The proton light yield of organic scintillators has been measured extensively in recent years using fast waveform digitizers and large discrepancies exist in the values reported by different authors. In this letter, we address principles of digital signal processing that must be considered when conducting scintillator light yield measurements. Digitized waveform pulse height values are only proportional to the amount of scintillation light if the temporal shape of the scintillation pulse is independent of the amount of energy deposited. This is not the case for scintillation pulses resulting from fast neutron interactions in organic scintillators. Authors measuring proton light yield should therefore report pulse integral values and ensure that the integration length is long enough to capture most of the scintillation light.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Low Energy Light Yield of Fast Plastic Scintillators
Authors:
T. A. Laplace,
B. L. Goldblum,
J. A. Brown,
D. L. Bleuel,
C. A. Brand,
G. Gabella,
T. Jordan,
C. Moore,
N. Munshi,
Z. W. Sweger,
A. Ureche,
E. Brubaker
Abstract:
Compact neutron imagers using double-scatter kinematic reconstruction are being designed for localization and characterization of special nuclear material. These neutron imaging systems rely on scintillators with a rapid prompt temporal response as the detection medium. As n-p elastic scattering is the primary mechanism for light generation by fast neutron interactions in organic scintillators, pr…
▽ More
Compact neutron imagers using double-scatter kinematic reconstruction are being designed for localization and characterization of special nuclear material. These neutron imaging systems rely on scintillators with a rapid prompt temporal response as the detection medium. As n-p elastic scattering is the primary mechanism for light generation by fast neutron interactions in organic scintillators, proton light yield data are needed for accurate assessment of scintillator performance. The proton light yield of a series of commercial fast plastic organic scintillators---EJ-200, EJ-204, and EJ-208---was measured via a double time-of-flight technique at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a tunable deuteron breakup neutron source, target scintillators housed in a dual photomultiplier tube configuration, and an array of pulse-shape-discriminating observation scintillators, the fast plastic scintillator light yield was measured over a broad and continuous energy range down to proton recoil energies of approximately 50 keV. This work provides key input to event reconstruction algorithms required for utilization of these materials in emerging neutron imaging modalities.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Neutrino Detectors as Tools for Nuclear Security
Authors:
Adam Bernstein,
Nathaniel Bowden,
Bethany L. Goldblum,
Patrick Huber,
Igor Jovanovic,
John Mattingly
Abstract:
For over 40 years, physicists have considered possible uses for neutrino detectors in nuclear nonproliferation, arms control, and fissile materials security. Neutrinos are an attractive fission signature because they readily pass through matter. The same property makes neutrinos challenging to detect in systems that would be practical for nuclear security applications. This colloquium presents a b…
▽ More
For over 40 years, physicists have considered possible uses for neutrino detectors in nuclear nonproliferation, arms control, and fissile materials security. Neutrinos are an attractive fission signature because they readily pass through matter. The same property makes neutrinos challenging to detect in systems that would be practical for nuclear security applications. This colloquium presents a broad overview of several potential neutrino applications, including the near-field monitoring of known reactors, far-field monitoring of known or discovery of undeclared reactors, detection of reactor waste streams, and detection of nuclear explosions. We conclude that recent detector advances have made near-field monitoring feasible. Farther-field reactor detection and waste stream detection monitoring are possible in some cases with further research and development. Very long-range reactor monitoring and nuclear explosion detection do not appear feasible for the foreseeable future due to considerable physical and/or practical constraints.
△ Less
Submitted 25 March, 2020; v1 submitted 19 August, 2019;
originally announced August 2019.
-
Restricted spin-range correction in the Oslo Method: The example of nuclear level density and $γ$-ray strength function from $^{239}\mathrm{Pu}(\mathrm{d,p}γ)^{240}\mathrm{Pu}$
Authors:
F. Zeiser,
G. M. Tveten,
G. Potel,
A. C. Larsen,
M. Guttormsen,
T. A. Laplace,
S. Siem,
D. L. Bleuel,
B. L. Goldblum,
L. A. Bernstein,
F. L. Bello Garrote,
L. Crespo Campo,
T. K. Eriksen,
A. Görgen,
K. Hadynska-Klek,
V. W. Ingeberg,
J. E. Midtbø,
E. Sahin,
T. Tornyi,
A. Voinov,
M. Wiedeking,
J. Wilson
Abstract:
The Oslo Method has been applied to particle-$γ$ coincidences following the $^{239}\mathrm{Pu}$(d,p) reaction to obtain the nuclear level density (NLD) and $γ$-ray strength function ($γ$SF) of $^{240}\mathrm{Pu}$. The experiment was conducted with a 12 MeV deuteron beam at the Oslo Cyclotron Laboratory. The low spin transfer of this reaction leads to a spin-parity mismatch between populated and in…
▽ More
The Oslo Method has been applied to particle-$γ$ coincidences following the $^{239}\mathrm{Pu}$(d,p) reaction to obtain the nuclear level density (NLD) and $γ$-ray strength function ($γ$SF) of $^{240}\mathrm{Pu}$. The experiment was conducted with a 12 MeV deuteron beam at the Oslo Cyclotron Laboratory. The low spin transfer of this reaction leads to a spin-parity mismatch between populated and intrinsic levels. This is a challenge for the Oslo Method as it can have a significant impact on the extracted NLD and $γ$SF. We have developed an iterative approach to ensure consistent results even for cases with a large spin-parity mismatch, in which we couple Green's Function Transfer calculations of the spin-parity dependent population cross-section to the nuclear decay code RAINIER. The resulting $γ$SF shows a pronounced enhancement between 2-4 MeV that is consistent with the location of the low-energy orbital $M1$ scissors mode.
△ Less
Submitted 25 July, 2019; v1 submitted 5 April, 2019;
originally announced April 2019.