-
Continuous-wave nitrogen-vacancy diamond laser system assisted by a red diode laser
Authors:
Lukas Lindner,
Felix A. Hahl,
Tingpeng Luo,
Guillermo Nava Antonio,
Xavier Vidal,
Marcel Rattunde,
Takeshi Ohshima,
Marco Capelli,
Brant C. Gibson,
Andrew D. Greentree,
Rüdiger Quay,
Jan Jeske
Abstract:
Diamond has long been identified as a potential host material for laser applications. This potential arises due to its exceptional thermal properties, ultra-wide bandgap, and color centers which promise gain across the visible spectrum. More recently, coherent laser methods offer new approaches to magnetometry. However, diamond fabrication is difficult in comparison to other crystalline matrices,…
▽ More
Diamond has long been identified as a potential host material for laser applications. This potential arises due to its exceptional thermal properties, ultra-wide bandgap, and color centers which promise gain across the visible spectrum. More recently, coherent laser methods offer new approaches to magnetometry. However, diamond fabrication is difficult in comparison to other crystalline matrices, and many optical loss channels are not yet understood. Here, we demonstrate the first continuous-wave nitrogen-vacancy (NV) color center laser system. To achieve this, we constructed a laser cavity with both, an NV-diamond medium and an intra-cavity anti-reflection coated diode laser. This dual-medium approach compensates intrinsic losses of the cavity by providing a fixed additional gain below threshold of the diode laser. We observe the first clear continuous-wave laser threshold in the output of the laser system as well as linewidth narrowing with increasing green pump power on the NV centers. Our results are a major development towards coherent approaches to magnetometry.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Handheld device for non-contact thermometry via optically detected magnetic resonance of proximate diamond sensors
Authors:
G. J. Abrahams,
E. Ellul,
I. O. Robertson,
A. Khalid,
A. D. Greentree,
B. C. Gibson,
J. -P. Tetienne
Abstract:
Optically detected magnetic resonance (ODMR) spectroscopy of defect-rich semiconductors is being increasingly exploited for realising a variety of practical quantum sensing devices. A prime example is the on-going development of compact magnetometers based on the nitrogen-vacancy (NV) defect in diamond for the remote sensing of magnetic signals with high accuracy and sensitivity. In these applicat…
▽ More
Optically detected magnetic resonance (ODMR) spectroscopy of defect-rich semiconductors is being increasingly exploited for realising a variety of practical quantum sensing devices. A prime example is the on-going development of compact magnetometers based on the nitrogen-vacancy (NV) defect in diamond for the remote sensing of magnetic signals with high accuracy and sensitivity. In these applications, the ODMR-active material is integrated into the overall apparatus to form a self-contained sensor. However, some emerging applications require the sensing material to be in physical contact with an external object of interest, thus requiring an independent readout device. Here we present an ODMR-meter, a compact device specially designed to allow convenient, contactless monitoring of ODMR in a target object, and demonstrate its application to temperature monitoring with NV defects. Our prototype is composed of a handheld readout head (integrating all the necessary optical components and a microwave antenna) and a control box connected to a laptop computer, all made primarily from commercial off-the-shelf components. We test our device using an NV-rich bulk diamond as the object, demonstrate a temperature sensitivity of $10~{\rm mK}/\sqrt{\rm Hz}$ in static conditions, and demonstrate the feasibility of handheld operation. The limitations to measurement speed, sensitivity and accuracy are discussed. The presented device may find immediate use in medical and industrial applications where accurate thermometry is required, and can be extended to magnetic field measurements.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
All-optical determination of one or two emitters using quantum polarization with nitrogen-vacancy centers in diamond
Authors:
Davin Yue Ming Peng,
Josef G. Worboys,
Qiang Sun,
Shuo Li,
Marco Capelli,
Shinobu Onoda,
Takeshi Ohshima,
Philipp Reineck,
Brant C. Gibson,
Andrew D. Greentree
Abstract:
Qubit technologies using nitrogen-vacancy color centers in diamonds require precise knowledge of the centers, including the number of emitters within a diffraction-limited spot and their orientations. However, the number of emitters is challenging to determine when there is finite background, which affects the precision of resulting quantum protocols. Here we show the photoluminescence (PL) intens…
▽ More
Qubit technologies using nitrogen-vacancy color centers in diamonds require precise knowledge of the centers, including the number of emitters within a diffraction-limited spot and their orientations. However, the number of emitters is challenging to determine when there is finite background, which affects the precision of resulting quantum protocols. Here we show the photoluminescence (PL) intensity and quantum correlation (Hanbury Brown and Twiss) measurements as a function of polarization for one- and two-emitter systems. The sample was made by implanting low concentrations of adenine (C5H5N5) into a low nitrogen chemical vapor deposition diamond. This approach yielded well-spaced regions with few nitrogen-vacancy centers. By map** the PL intensity and quantum correlation as a function of polarization, we can distinguish two emitter systems from single emitters with background, providing a method to quantify the background signal at implanted sites, which might be different from off-site background levels. This approach also provides a valuable new all-optical mechanism for the determination of one or two emitter systems useful for quantum sensing, communication, and computation tasks.
△ Less
Submitted 5 June, 2023; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Magnetic-Field-Dependent Stimulated Emission from Nitrogen-Vacancy Centres in Diamond
Authors:
F. Hahl,
L. Lindner,
X. Vidal,
T. Ohshima,
S. Onoda,
S. Ishii,
A. M. Zaitsev,
M. Capelli,
T. Luo,
B. C. Gibson,
A. D. Greentree,
J. Jeske
Abstract:
Negatively charged nitrogen-vacancy centres in diamond are promising quantum magnetic field sensors. Laser threshold magnetometry has been a theoretical approach for the improvement of NV-centre ensemble sensitivity via increased signal strength and magnetic field contrast. In this work we experimentally demonstrate laser threshold magnetometry. We use a macroscopic high-finesse laser cavity conta…
▽ More
Negatively charged nitrogen-vacancy centres in diamond are promising quantum magnetic field sensors. Laser threshold magnetometry has been a theoretical approach for the improvement of NV-centre ensemble sensitivity via increased signal strength and magnetic field contrast. In this work we experimentally demonstrate laser threshold magnetometry. We use a macroscopic high-finesse laser cavity containing a highly NV-doped and low absorbing diamond gain medium that is pumped at 532nm and resonantly seeded at 710nm. This enables amplification of the signal power by stimulated emission of 64%. We show the magnetic-field dependency of the amplification and thus, demonstrate magnetic-field dependent stimulated emission from an NV-centre ensemble. This emission shows a record contrast of 33% and a maximum output power in the mW regime. These advantages of coherent read-out of NV-centres pave the way for novel cavity and laser applications of quantum defects as well as diamond NV magnetic field sensors with significantly improved sensitivity for the health, research and mining sectors.
△ Less
Submitted 10 September, 2021;
originally announced September 2021.
-
Fluorescent diamond microparticles doped glass fiber for magnetic field sensing
Authors:
Dongbi Bai,
Minh Hoa Huynh,
David A. Simpson,
Philipp Reineck,
Shahraam A. Vahid,
Andrew D. Greentree,
Scott Foster,
Brant C. Gibson,
Heike Ebendorff-Heidepriem
Abstract:
Diamond containing the negatively charged nitrogen-vacancy (NV) center is emerging as a significant new system for magnetometry. However, most NV sensors require microscopes to collect the fluorescence signals and are therefore limited to laboratory settings. By incorporating micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, a high-sensitivi…
▽ More
Diamond containing the negatively charged nitrogen-vacancy (NV) center is emerging as a significant new system for magnetometry. However, most NV sensors require microscopes to collect the fluorescence signals and are therefore limited to laboratory settings. By incorporating micron-scale diamond particles at an annular interface within the cross section of a silicate glass fiber, a high-sensitivity and robust fiber platform for magnetic field sensing is demonstrated here. The fluorescence and spin properties of NV centers embedded in the diamond crystals are well preserved during the fiber drawing process, leading to enhanced continuous-wave diamond-magnetometry in fiber-transmitted sensing configurations. The interface do** of diamond particles also leads to reduced fiber propagation loss and benefits the guidance of NV-fluorescence in the hybrid fiber. Using the diamond-fiber system, magnetic field readout through 50 cm of fiber is achieved. This study paves the way for novel fiber-based diamond sensors for field-deployable quantum metrology applications.
△ Less
Submitted 9 March, 2020;
originally announced April 2020.
-
UV plasmonic properties of colloidal liquid-metal eutectic gallium-indium alloy nanoparticles
Authors:
Philipp Reineck,
Yiliang Lin,
Brant C. Gibson,
Michael D. Dickey,
Andrew D. Greentree,
Ivan S. Maksymov
Abstract:
Nanoparticles made of non-noble metals such as gallium have recently attracted significant attention due to promising applications in UV plasmonics. To date, experiments have mostly focused on solid and liquid pure gallium particles immobilized on solid substrates. However, for many applications, colloidal liquid-metal nanoparticle solutions are vital. Here, we experimentally demonstrate strong UV…
▽ More
Nanoparticles made of non-noble metals such as gallium have recently attracted significant attention due to promising applications in UV plasmonics. To date, experiments have mostly focused on solid and liquid pure gallium particles immobilized on solid substrates. However, for many applications, colloidal liquid-metal nanoparticle solutions are vital. Here, we experimentally demonstrate strong UV plasmonic resonances of eutectic gallium-indium (EGaIn) liquid-metal alloy nanoparticles suspended in ethanol. We rationalise experimental results through a theoretical model based on Mie theory. Our results contribute to the understanding of UV plasmon resonances in colloidal liquid-metal EGaIn nanoparticle suspensions. They will also enable further research into emerging applications of UV plasmonics in biomedical imaging, sensing, stretchable electronics, photoacoustics, and electrochemistry.
△ Less
Submitted 14 October, 2018;
originally announced October 2018.
-
Nanodiamond arrays on glass for quantification and fluorescence characterisation
Authors:
Ashleigh H. Heffernan,
Andrew D. Greentree,
Brant C. Gibson
Abstract:
Quantifying the variation in emission properties of fluorescent nanodiamonds is important for develo** their wide-ranging applicability. Directed self-assembly techniques show promise for positioning nanodiamonds precisely enabling such quantification. Here we show an approach for depositing nanodiamonds in pre-determined arrays which are used to gather statistical information about fluorescent…
▽ More
Quantifying the variation in emission properties of fluorescent nanodiamonds is important for develo** their wide-ranging applicability. Directed self-assembly techniques show promise for positioning nanodiamonds precisely enabling such quantification. Here we show an approach for depositing nanodiamonds in pre-determined arrays which are used to gather statistical information about fluorescent lifetimes. The arrays were created via a layer of photoresist patterned with grids of apertures using electron beam lithography and then drop-cast with nanodiamonds. Electron microscopy revealed a 90% average deposition yield across 3,376 populated array sites, with an average of 20 nanodiamonds per site. Confocal microscopy, optimised for nitrogen vacancy fluorescence collection, revealed a broad distribution of fluorescent lifetimes in agreement with literature. This method for statistically quantifying fluorescent nanoparticles provides a step towards fabrication of hybrid photonic devices for applications from quantum cryptography to sensing.
△ Less
Submitted 10 May, 2017;
originally announced May 2017.
-
Stimulated emission from NV centres in diamond
Authors:
Jan Jeske,
Desmond W. M. Lau,
Liam P. McGuinness,
Philip Reineck,
Brett C. Johnson,
Jeffrey C. McCallum,
Fedor Jelezko,
Thomas Volz,
Jared H. Cole,
Brant C. Gibson,
Andrew D. Greentree
Abstract:
Stimulated emission is the process fundamental to laser operation, thereby producing coherent photon output. Despite negatively-charged nitrogen-vacancy (NV$^-$) centres being discussed as a potential laser medium since the 1980's, there have been no definitive observations of stimulated emission from ensembles of NV$^-$ to date. Reasons for this lack of demonstration include the short excited sta…
▽ More
Stimulated emission is the process fundamental to laser operation, thereby producing coherent photon output. Despite negatively-charged nitrogen-vacancy (NV$^-$) centres being discussed as a potential laser medium since the 1980's, there have been no definitive observations of stimulated emission from ensembles of NV$^-$ to date. Reasons for this lack of demonstration include the short excited state lifetime and the occurrence of photo-ionisation to the neutral charge state by light around the zero-phonon line. Here we show both theoretical and experimental evidence for stimulated emission from NV$^-$ states using light in the phonon-sidebands. Our system uses a continuous wave pump laser at 532 nm and a pulsed stimulating laser that is swept across the phononic sidebands of the NV$^-$. Optimal stimulated emission is demonstrated in the vicinity of the three-phonon line at 700 nm. Furthermore, we show the transition from stimulated emission to photoionisation as the stimulating laser wavelength is reduced from 700nm to 620 nm. While lasing at the zero-phonon line is suppressed by ionisation, our results open the possibility of diamond lasers based on NV centres, tuneable over the phonon-sideband. This broadens the applications of NV magnetometers from single centre nanoscale sensors to a new generation of ultra-precise ensemble laser sensors, which exploit the contrast and signal amplification of a lasing system.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Remote Nanodiamond Magnetometry
Authors:
Yinlan Ruan,
David A. Simpson,
Jan Jeske,
Heike Ebendorff-Heidepriem,
Desmond W. M. Lau,
Hong Ji,
Brett C. Johnson,
Takeshi Ohshima,
Shahraam Afshar V.,
Lloyd Hollenberg,
Andrew D. Greentree,
Tanya M. Monro,
Brant C. Gibson
Abstract:
Optical fibres have transformed the way people interact with the world and now permeate many areas of science. Optical fibres are traditionally thought of as insensitive to magnetic fields, however many application areas from mining to biomedicine would benefit from fibre-based remote magnetometry devices. In this work, we realise such a device by embedding nanoscale magnetic sensors into tellurit…
▽ More
Optical fibres have transformed the way people interact with the world and now permeate many areas of science. Optical fibres are traditionally thought of as insensitive to magnetic fields, however many application areas from mining to biomedicine would benefit from fibre-based remote magnetometry devices. In this work, we realise such a device by embedding nanoscale magnetic sensors into tellurite glass fibres. Remote magnetometry is performed on magnetically active defect centres in nanodiamonds embedded into the glass matrix. Standard optical magnetometry techniques are applied to initialize and detect local magnetic field changes with a measured sensitivity of 26 micron Tesla/square root(Hz). Our approach utilizes straight-forward optical excitation, simple focusing elements, and low power components. We demonstrate remote magnetometry by direct reporting of the magnetic ground states of nitrogen-vacancy defect centres in the optical fibres. In addition, we present and describe theoretically an all-optical technique that is ideally suited to remote fibre-based sensing. The implications of our results broaden the applications of optical fibres, which now have the potential to underpin a new generation of medical magneto-endoscopes and remote mining sensors.
△ Less
Submitted 21 February, 2016;
originally announced February 2016.
-
Enhanced photoluminescence from single nitrogen-vacancy defects in nanodiamonds coated with metal-phenolic networks
Authors:
Kerem Bray,
Rodolfo Previdi,
Brant C. Gibson,
Olga Shimoni,
Igor Aharonovich
Abstract:
Fluorescent nanodiamonds are attracting major attention in the field of bio-sensing and biolabeling. In this work we demonstrate a robust approach to surface functionalize individual nanodiamonds with metal-phenolic networks that enhance the photoluminescence from single nitrogen vacancy (NV) centers. We show that single NV centres in the coated nanodiamonds also exhibit shorter lifetimes, opening…
▽ More
Fluorescent nanodiamonds are attracting major attention in the field of bio-sensing and biolabeling. In this work we demonstrate a robust approach to surface functionalize individual nanodiamonds with metal-phenolic networks that enhance the photoluminescence from single nitrogen vacancy (NV) centers. We show that single NV centres in the coated nanodiamonds also exhibit shorter lifetimes, opening another channel for high resolution sensing. We propose that the nanodiamond encapsulation suppresses the non-radiative decay pathways of the NV color centers. Our results provide a versatile and assessable way to enhance photoluminescence from nanodiamond defects that can be used in a variety of sensing and imaging applications
△ Less
Submitted 29 January, 2015;
originally announced January 2015.
-
Nanodiamond in tellurite glass Part II: practical nanodiamond-doped fibers
Authors:
Yinlan Ruan,
Hong Ji,
Brett C. Johnson,
Takeshi Ohshima,
Andrew D. Greentree,
Brant C. Gibson,
Tanya M. Monro,
Heike Ebendorff-Heidepriem
Abstract:
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonics applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. The first part of this study reported the origin of loss in nanodiamond-doped glass and impact of glass…
▽ More
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonics applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. The first part of this study reported the origin of loss in nanodiamond-doped glass and impact of glass fabrication conditions. Here, we report the fabrication of nanodiamond-doped tellurite fibers with significantly reduced loss in the visible through further understanding of the impact of glass fabrication conditions on the interaction of the glass melt with the embedded nanodiamond. We fabricated tellurite fibers containing nanodiamond in concentrations up to 0.7 ppm-weight, while reducing the loss by more than an order of magnitude down to 10 dB/m at 600-800 nm.
△ Less
Submitted 5 November, 2014;
originally announced November 2014.
-
Nanodiamond in tellurite glass Part I: origin of loss in nanodiamond-doped glass
Authors:
Heike Ebendorff-Heidepriem,
Yinlan Ruan,
Hong Ji,
Andrew D. Greentree,
Brant C. Gibson,
Tanya M. Monro
Abstract:
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonic applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. In the first part of this study, we report the effect of interaction of the tellurite glass melt with the…
▽ More
Tellurite glass fibers with embedded nanodiamond are attractive materials for quantum photonic applications. Reducing the loss of these fibers in the 600-800 nm wavelength range of nanodiamond fluorescence is essential to exploit the unique properties of nanodiamond in the new hybrid material. In the first part of this study, we report the effect of interaction of the tellurite glass melt with the embedded nanodiamond on the loss of the glasses. The glass fabrication conditions such as melting temperature and concentration of NDs added to the melt were found to have critical influence on the interaction. Based on this understanding, we identified promising fabrication conditions for decreasing the loss to levels required for practical applications.
△ Less
Submitted 29 October, 2014;
originally announced October 2014.
-
Near orthogonal launch of SPR modes in Au films
Authors:
John Canning,
Akib Karim,
Nikki Tzoumis,
Yanzhen Tan,
Rodolfo Patyk,
Brant C. Gibson
Abstract:
We report the excitation of a surface plasmon resonance (SPR) close to the orthogonal axis of a gold (Au) film on borosilicate glass. Direct spectroscopic measurement of SPR shifts using different liquids are made at ~5° incidence within a reflection spectrophotometer. Scattering of light that is able to penetrate across the film at the interfaces is the proposed mechanism by which coupling, and p…
▽ More
We report the excitation of a surface plasmon resonance (SPR) close to the orthogonal axis of a gold (Au) film on borosilicate glass. Direct spectroscopic measurement of SPR shifts using different liquids are made at ~5° incidence within a reflection spectrophotometer. Scattering of light that is able to penetrate across the film at the interfaces is the proposed mechanism by which coupling, and plasmon localization, is established.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.
-
On Chip Manipulation of Single Photons from a Diamond Defect
Authors:
J. E. Kennard,
J. P. Hadden,
L. Marseglia,
I. Aharonovich,
S. Castelletto,
B. R. Patton,
A. Politi,
J. C. F. Matthews,
A. G. Sinclair,
B. C. Gibson,
S. Prawer,
J. G. Rarity,
J. L. O'Brien
Abstract:
Operating reconfigurable quantum circuits with single photon sources is a key goal of photonic quantum information science and technology. We use an integrated waveguide device comprising of directional couplers and a reconfigurable thermal phase controller to manipulate single photons emitted from a chromium related colour centre in diamond. Observation of both a wave-like interference pattern an…
▽ More
Operating reconfigurable quantum circuits with single photon sources is a key goal of photonic quantum information science and technology. We use an integrated waveguide device comprising of directional couplers and a reconfigurable thermal phase controller to manipulate single photons emitted from a chromium related colour centre in diamond. Observation of both a wave-like interference pattern and particle-like sub-Poissionian autocorrelation functions demonstrates coherent manipulation of single photons emitted from the chromium related centre and verifies wave particle duality.
△ Less
Submitted 19 April, 2013; v1 submitted 15 April, 2013;
originally announced April 2013.
-
Room temperature self-assembly of mixed nanoparticles into complex material systems and devices
Authors:
Masood Naqshbandi,
John Canning,
Brant C. Gibson,
Maxwell J. Crossley
Abstract:
The ability to manufacture nanomaterials with complex and structured composition using otherwise incompatible materials increasingly underpins the next generation of technologies. This is translating into growing efforts integrating a wider range of materials onto key technology platforms1 - in photonics, one such platform is silica, a passive, low loss and robust medium crucial for efficient opti…
▽ More
The ability to manufacture nanomaterials with complex and structured composition using otherwise incompatible materials increasingly underpins the next generation of technologies. This is translating into growing efforts integrating a wider range of materials onto key technology platforms1 - in photonics, one such platform is silica, a passive, low loss and robust medium crucial for efficient optical transport2. Active functionalisation, either through added gain or nonlinearity, is mostly possible through the integration of active materials3, 4. The high temperatures used in manufacturing of silica waveguides, unfortunately, make it impossible to presently integrate many organic and inorganic species critical to achieving this extended functionality. Here, we demonstrate the fabrication of novel waveguides and devices made up of complex silica based materials using the self-assembly of nanoparticles. In particular, the room temperature fabrication of silica microwires integrated with organic dyes (Rhodamine B) and single photon emitting nanodiamonds is presented.
△ Less
Submitted 13 January, 2012;
originally announced January 2012.
-
Nano-manipulation of diamond-based single photon sources
Authors:
E. Ampem-Lassen,
D. A. Simpson,
B. C. Gibson,
S. Trpkovski,
F. M. Hossain,
S. T. Huntington,
K. Ganesan,
L. C. L. Hollenberg,
S. Prawer
Abstract:
The ability to manipulate nano-particles at the nano-scale is critical for the development of active quantum systems. This paper presents a new technique to manipulate diamond nano-crystals at the nano-scale using a scanning electron microscope, nano-manipulator and custom tapered optical fibre probes. The manipulation of a ~ 300 nm diamond crystal, containing a single nitrogen-vacancy centre, o…
▽ More
The ability to manipulate nano-particles at the nano-scale is critical for the development of active quantum systems. This paper presents a new technique to manipulate diamond nano-crystals at the nano-scale using a scanning electron microscope, nano-manipulator and custom tapered optical fibre probes. The manipulation of a ~ 300 nm diamond crystal, containing a single nitrogen-vacancy centre, onto the endface of an optical fibre is demonstrated. The emission properties of the single photon source post manipulation are in excellent agreement with those observed on the original substrate.
△ Less
Submitted 17 May, 2009;
originally announced May 2009.
