Showing 1–30 of 30 results for author: Giammanco, A

Cosmic rays for imaging cultural heritage objects

Authors: Andrea Giammanco, Marwa Al Moussawi, Matthieu Boone, Tim De Kock, Judy De Roy, Sam Huysmans, Vishal Kumar, Maxime Lagrange, Michael Tytgat

Abstract: In cultural heritage conservation, it is increasingly common to rely on non-destructive imaging methods based on the absorption or scattering of photons ($X$ or $γ$ rays) or neutrons. However, physical and practical issues limit these techniques: their penetration depth may be insufficient for large and dense objects, they require transporting the objects of interest to dedicated laboratories, art… ▽ More In cultural heritage conservation, it is increasingly common to rely on non-destructive imaging methods based on the absorption or scattering of photons ($X$ or $γ$ rays) or neutrons. However, physical and practical issues limit these techniques: their penetration depth may be insufficient for large and dense objects, they require transporting the objects of interest to dedicated laboratories, artificial radiation is hazardous and may induce activation in the material under study. Muons are elementary particles abundantly and freely produced in cosmic-ray interactions in the atmosphere. Their absorption and scattering in matter are characteristically dependent on the density and elemental composition of the material that they traverse, which offers the possibility of exploiting them for sub-surface remote imaging. This novel technique, nicknamed "muography", has been applied in use cases ranging from geophysics to archaeology to nuclear safety, but it has been so far under-explored for a vast category of cultural heritage objects that are relatively large (from decimeters to human size) and dense (stone, metals). The development of portable muon detectors makes muography particularly competitive in cases where the items to be analysed are not transportable, or set up in a confined environment. This document reviews the relevant literature, presents some exemplary use cases, and critically assesses the strengths and weaknesses of muography in this context. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Comments: Submitted to a special issue of iScience about "Cosmic-Ray Muography and Applications"

Performance testing of gas-tight portable RPC for muography applications

Authors: V. Kumar, S. Basnet, E. Cortina Gil, P. Demin, R. M. I. D. Gamage, A. Giammanco, R. Karnam, M. Moussawi, A. Samalan, M. Tytgat, A. Youssef

Abstract: This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehen… ▽ More This paper reports the latest developmental efforts for a position-sensitive glass-based Resistive Plate Chamber (RPC) and a multi-channel Data AcQuisition (DAQ) system tailored for muon tracking in muography applications. The designed setup prioritizes portability, aiming for field applications where both the detector and the DAQ operate effectively in external environmental conditions. Comprehensive discussions on hardware development activities and signal processing techniques are included, incorporating noise filtering to enhance the accurate detection of real muons. A muon absorption measurement has also been carried out to understand the behavior of these detectors from an application perspective. △ Less

Submitted 23 February, 2024; v1 submitted 12 December, 2023; originally announced December 2023.

Comments: 11 pages, 8 figures, conference

Simulation tools, first results and experimental status of the MURAVES experiment

Authors: Andrea Giammanco, Yanwen Hong, Marwa Al Moussawi, Fabio Ambrosino, Antonio Anastasio, Samip Basnet, Lorenzo Bonechi, Massimo Bongi, Diletta Borselli, Alan Bross, Antonio Caputo, Roberto Ciaranfi, Luigi Cimmino, Vitaliano Ciulli, Raffaello D'Alessandro, Mariaelena D'Errico, Catalin Frosin, Flora Giudicepietro, Sandro Gonzi, Giovanni Macedonio, Vincenzo Masone, Massimo Orazi, Andrea Paccagnella, Rosario Peluso, Anna Pla-Dalmau , et al. (7 additional authors not shown)

Abstract: The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution… ▽ More The MUon RAdiography of VESuvius (MURAVES) project aims at the study of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy, with the use of muons freely and abundantly produced by cosmic rays. In particular, the MURAVES experiment intends to perform muographic imaging of the internal structure of the summit of Mt. Vesuvius. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help model possible eruption dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. This paper presents preliminary results from the analysis of the first data samples acquired with trackers pointing towards Mt. Vesuvius, including the first relative measurement of the density projection of two flanks of the volcano at three different altitudes; we also present the workflow of the simulation chain of the MURAVES experiment and its ongoing developments. △ Less

Submitted 19 June, 2024; v1 submitted 22 November, 2023; originally announced November 2023.

Small-area Portable Resistive Plate Chambers for Muography

Authors: Amrutha Samalan, Samip Basnet, Eduardo Cortina Gil, Pavel Demin, Ishan Darshana Ran Muthugalalage, Andrea Giammanco, Raveendrababu Karnam, Vishal Kumar, Marwa Al Moussawi, Michael Tytgat, Ayman Youssef

Abstract: Muography is finding applications in various domains such as volcanology, archaeology, civil engineering, industry, mining, and nuclear waste surveys. To simplify transportation and installation in remote locations after laboratory testing, a fully portable and autonomous muon telescope based on Resistive Plate Chambers (RPCs) is being developed. Two glass-RPC prototypes have been created, sharing… ▽ More Muography is finding applications in various domains such as volcanology, archaeology, civil engineering, industry, mining, and nuclear waste surveys. To simplify transportation and installation in remote locations after laboratory testing, a fully portable and autonomous muon telescope based on Resistive Plate Chambers (RPCs) is being developed. Two glass-RPC prototypes have been created, sharing the same design goals but with different detector parameters, and comparative studies are ongoing. Drawing from prototype experience, a double-gap RPC with advanced features and improved spatial resolution is constructed. Resistive electrodes are produced manually, and a new data acquisition board is currently undergoing calibration. The results on prototype performance, readout board comparisons and the technical progress on the double-gap RPC are presented. △ Less

Submitted 19 November, 2023; originally announced November 2023.

Investigation of the Impact of Magnetic Fields on Scattering Muography Images

Authors: Hamid Basiri, Tadahiro Kin, Eduardo Cortina Gil, Andrea Giammanco

Abstract: Muography is a non-invasive imaging technique that exploits cosmic-ray muons to probe various targets by analyzing the absorption or scattering of muons. The method is particularly useful for applications ranging from geophysical exploration to security screening, including the identification of nuclear materials. This study leverages both Monte Carlo simulations and the Point of Closest Approach… ▽ More Muography is a non-invasive imaging technique that exploits cosmic-ray muons to probe various targets by analyzing the absorption or scattering of muons. The method is particularly useful for applications ranging from geophysical exploration to security screening, including the identification of nuclear materials. This study leverages both Monte Carlo simulations and the Point of Closest Approach (PoCA) algorithm for image reconstruction to specifically explore the distortions caused by magnetic fields in scattering muography images. In the PoCA algorithm, it is assumed that all scattering of a muon during its travel in material occurs at a single point, known as the PoCA point. Each PoCA point is characterized by a scattering angle, whose distribution provides insights into the density and elemental composition of the target material. However, magnetic fields can influence muon trajectories according to Lorentz law, affecting the estimated positions of the PoCA points and the calculated scattering angles. This introduces challenges in applications such as border security control systems. Moreover, the presence of magnetic fields can lead to what we term "magnetic jamming", where the resulting muography image is distorted or misleading. This effect further complicates the accurate identification and interpretation of target materials. Our findings underline the necessity to account for magnetic field distortions when utilizing scattering muography in practical scenarios. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Progress in End-to-End Optimization of Detectors for Fundamental Physics with Differentiable Programming

Authors: Max Aehle, Lorenzo Arsini, R. Belén Barreiro, Anastasios Belias, Florian Bury, Susana Cebrian, Alexander Demin, Jennet Dickinson, Julien Donini, Tommaso Dorigo, Michele Doro, Nicolas R. Gauger, Andrea Giammanco, Lindsey Gray, Borja S. González, Verena Kain, Jan Kieseler, Lisa Kusch, Marcus Liwicki, Gernot Maier, Federico Nardi, Fedor Ratnikov, Ryan Roussel, Roberto Ruiz de Austri, Fredrik Sandin , et al. (5 additional authors not shown)

Abstract: In this article we examine recent developments in the research area concerning the creation of end-to-end models for the complete optimization of measuring instruments. The models we consider rely on differentiable programming methods and on the specification of a software pipeline including all factors impacting performance -- from the data-generating processes to their reconstruction and the ext… ▽ More In this article we examine recent developments in the research area concerning the creation of end-to-end models for the complete optimization of measuring instruments. The models we consider rely on differentiable programming methods and on the specification of a software pipeline including all factors impacting performance -- from the data-generating processes to their reconstruction and the extraction of inference on the parameters of interest of a measuring instrument -- along with the careful specification of a utility function well aligned with the end goals of the experiment. Building on previous studies originated within the MODE Collaboration, we focus specifically on applications involving instruments for particle physics experimentation, as well as industrial and medical applications that share the detection of radiation as their data-generating mechanism. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Comments: 70 pages, 17 figures. To be submitted to journal

TomOpt: Differential optimisation for task- and constraint-aware design of particle detectors in the context of muon tomography

Authors: Giles C. Strong, Maxime Lagrange, Aitor Orio, Anna Bordignon, Florian Bury, Tommaso Dorigo, Andrea Giammanco, Mariam Heikal, Jan Kieseler, Max Lamparth, Pablo Martínez Ruíz del Árbol, Federico Nardi, Pietro Vischia, Haitham Zaraket

Abstract: We describe a software package, TomOpt, developed to optimise the geometrical layout and specifications of detectors designed for tomography by scattering of cosmic-ray muons. The software exploits differentiable programming for the modeling of muon interactions with detectors and scanned volumes, the inference of volume properties, and the optimisation cycle performing the loss minimisation. In d… ▽ More We describe a software package, TomOpt, developed to optimise the geometrical layout and specifications of detectors designed for tomography by scattering of cosmic-ray muons. The software exploits differentiable programming for the modeling of muon interactions with detectors and scanned volumes, the inference of volume properties, and the optimisation cycle performing the loss minimisation. In doing so, we provide the first demonstration of end-to-end-differentiable and inference-aware optimisation of particle physics instruments. We study the performance of the software on a relevant benchmark scenarios and discuss its potential applications. △ Less

Submitted 8 October, 2023; v1 submitted 25 September, 2023; originally announced September 2023.

Comments: V2: Updated author list; 28 pages content

Muons for cultural heritage

Authors: Marwa Moussawi, Andrea Giammanco, Vishal Kumar, Maxime Lagrange

Abstract: Non-destructive subsurface imaging methods based on the absorption or scattering of photons or neutrons are becoming increasingly popular in cultural asset conservation. However, these techniques are limited by physical and practical issues: their penetration depth may be insufficient for large items, and they usually necessitate transferring the objects of interest to specialised laboratories. Th… ▽ More Non-destructive subsurface imaging methods based on the absorption or scattering of photons or neutrons are becoming increasingly popular in cultural asset conservation. However, these techniques are limited by physical and practical issues: their penetration depth may be insufficient for large items, and they usually necessitate transferring the objects of interest to specialised laboratories. The latter issue is recently being addressed by the development of portable sources, but artificial radiation can be harmful and is thus subjected to strict regulation. Muons are elementary particles that are abundantly and freely created in the atmosphere by cosmic-ray interactions. Their absorption and scattering in matter are respectively dependent on the density and elemental composition of the substance they traverse, suggesting that they could be used for subsurface remote imaging. This novel technique, dubbed "muography", has been used in applications ranging from geophysics to archaeology, but has remained largely unexplored for a wide range of cultural heritage objects that are small by muography standards but whose size and density are too large for conventional imaging methods. This document outlines the general arguments and some early simulation studies that aim at exploring the low-size limit of muography and its relevance for cultural heritage preservation. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Applying triangular correlation of angular deviation in muon scattering tomography for multi-block materials via GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco

Abstract: The scattering angle due to the target volume can be split into two interior angles in the tomographic setups based on the muon scattering, and we call this property as the triangular correlation where the sum of these two interior angles is equal to the scattering angle. In this study, we apply this triangular correlation for a multi-block material configuration that consist of concrete, stainles… ▽ More The scattering angle due to the target volume can be split into two interior angles in the tomographic setups based on the muon scattering, and we call this property as the triangular correlation where the sum of these two interior angles is equal to the scattering angle. In this study, we apply this triangular correlation for a multi-block material configuration that consist of concrete, stainless steel, and uranium. By changing the order of this material set, we employ the GEANT4 simulations and we show that the triangular correlation is valid in the multi-block material setups, thereby providing the possibility of supportive information for the coarse prediction of the material order in such configurations. △ Less

Submitted 29 December, 2022; v1 submitted 25 October, 2022; originally announced December 2022.

Comments: 3 figures, 1 table. arXiv admin note: substantial text overlap with arXiv:2112.00376

Portable Resistive Plate Chambers for Muography in confined environments

Authors: R. M. I. D Gamage, Samip Basnet, Eduardo Cortina Gil, Andrea Giammanco, Pavel Demin, Marwa Moussawi, Amrutha Samalan, Michael Tytgat, Raveendrababu Karnam, Ayman Youssef

Abstract: Muography (or muon radiography) is an imaging technique that relies on the use of cosmogenic muons as a free and safe radiation source. It can be applied in various fields such as archaeology, civil engineering, geology, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. In such applications, sometimes deploying muon detectors is challenging due to logistics, e.g… ▽ More Muography (or muon radiography) is an imaging technique that relies on the use of cosmogenic muons as a free and safe radiation source. It can be applied in various fields such as archaeology, civil engineering, geology, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. In such applications, sometimes deploying muon detectors is challenging due to logistics, e.g. in a narrow underground tunnel or mine. Therefore, we are develo** muon detectors whose design goals include portability, robustness, autonomy, versatility, and safety. Our portable muon detectors (or ``muoscopes'') are based on Resistive Plate Chambers (RPC), planar detectors that use ionization in a thin gas gap to detect cosmic muons. Prototype RPCs of active area $16 \times 16~cm^2$ and $28 \times 28~cm^2$ were built in our laboratories at Louvain-la-Neuve (UCLouvain) and Ghent (UGent) to test and compare various design options. Benefiting from the experience gained in building and operating these prototypes, we are proceeding towards the development of improved prototypes with more advanced technical layout and readiness. In this paper we provide the status of our performance studies, including the cross-validation of the two types of prototypes in a joint data taking, and an outline of the direction ahead. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Investigation of deflection angle for muon energy classification in muon scattering tomography via GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco, Mart Magi

Abstract: In muon scattering tomography, the investigated materials are discriminated according to the scattering angle that mainly depends on the atomic number, the density, and the thickness of the medium at a given energy value. The scattering angles at different initial energies also provide the opportunity to classify the incoming muons into a number of energy groups. In this study, by employing the GE… ▽ More In muon scattering tomography, the investigated materials are discriminated according to the scattering angle that mainly depends on the atomic number, the density, and the thickness of the medium at a given energy value. The scattering angles at different initial energies also provide the opportunity to classify the incoming muons into a number of energy groups. In this study, by employing the GEANT4 code, we show that the deflection angle exponentially decays as a function of energy, and the numerical values for the current configuration are below the detector accuracy except the initial energy bins owing to the low-Z, low density, and low thickness of the current plastic scintillators. This implies the necessity of additional components that provoke the muon scattering. Therefore, we introduce stainless steel surfaces into the top and bottom sections in order to amplify the deflection angle as well as to reduce the uncertainty, thereby improving the detector performance. △ Less

Submitted 13 April, 2022; originally announced April 2022.

Measurement of energy differential spectrum of cosmic-ray muons below 400 MeV

Authors: Hikaru Sato, Tadahiro Kin, Andrea Giammanco

Abstract: Recent applications of cosmic-ray muons require accurate modeling of their flux at low-energy. However, no measurement has been reported below 400 MeV. Therefore, we developed a full-absorption muon energy spectrometer to obtain energy differential flux below 400 MeV. Because our main detector can measure muon energies below 75 MeV, an energy degradation method is adopted (using 5- and 20-cm thick… ▽ More Recent applications of cosmic-ray muons require accurate modeling of their flux at low-energy. However, no measurement has been reported below 400 MeV. Therefore, we developed a full-absorption muon energy spectrometer to obtain energy differential flux below 400 MeV. Because our main detector can measure muon energies below 75 MeV, an energy degradation method is adopted (using 5- and 20-cm thick lead blocks) to shift the sensitive energy range. Three measurements were performed (in the normal mode and the two energy degrading modes) for 10 and 11 days each. The measurement results were compared with an analytical cosmic-ray model, PARMA (the particle and heavy ion transport code system-based analytical radiation model in the atmosphere) and we found that the model can precisely predict the lower energy part of the flux. △ Less

Submitted 14 April, 2022; originally announced April 2022.

Comments: 8 pages, 15 figures

Toward the End-to-End Optimization of Particle Physics Instruments with Differentiable Programming: a White Paper

Authors: Tommaso Dorigo, Andrea Giammanco, Pietro Vischia, Max Aehle, Mateusz Bawaj, Alexey Boldyrev, Pablo de Castro Manzano, Denis Derkach, Julien Donini, Auralee Edelen, Federica Fanzago, Nicolas R. Gauger, Christian Glaser, Atılım G. Baydin, Lukas Heinrich, Ralf Keidel, Jan Kieseler, Claudius Krause, Maxime Lagrange, Max Lamparth, Lukas Layer, Gernot Maier, Federico Nardi, Helge E. S. Pettersen, Alberto Ramos , et al. (11 additional authors not shown)

Abstract: The full optimization of the design and operation of instruments whose functioning relies on the interaction of radiation with matter is a super-human task, given the large dimensionality of the space of possible choices for geometry, detection technology, materials, data-acquisition, and information-extraction techniques, and the interdependence of the related parameters. On the other hand, massi… ▽ More The full optimization of the design and operation of instruments whose functioning relies on the interaction of radiation with matter is a super-human task, given the large dimensionality of the space of possible choices for geometry, detection technology, materials, data-acquisition, and information-extraction techniques, and the interdependence of the related parameters. On the other hand, massive potential gains in performance over standard, "experience-driven" layouts are in principle within our reach if an objective function fully aligned with the final goals of the instrument is maximized by means of a systematic search of the configuration space. The stochastic nature of the involved quantum processes make the modeling of these systems an intractable problem from a classical statistics point of view, yet the construction of a fully differentiable pipeline and the use of deep learning techniques may allow the simultaneous optimization of all design parameters. In this document we lay down our plans for the design of a modular and versatile modeling tool for the end-to-end optimization of complex instruments for particle physics experiments as well as industrial and medical applications that share the detection of radiation as their basic ingredient. We consider a selected set of use cases to highlight the specific needs of different applications. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Comments: 109 pages, 32 figures. To be submitted to Reviews in Physics

The MURAVES experiment: study of the Vesuvius Great Cone with Muon Radiography

Authors: M. D'Errico, F. Ambrosino, A. Anastasio, S. Basnet, L. Bonechi, M. Bongi, A. Bross, R. Ciaranfi, L. Cimmino, C. Ciulli, R. D'Alessandro, A. Giammanco, F. Giudicepietro, S. Gonzi, R. Karnam, G. Macedonio, V. Masone, N. Mori, M. Moussawi, M. Orazi, G. Passeggio, R. Peluso, A. Pla-Dalmau, C. Rendon, A. Samalan , et al. (6 additional authors not shown)

Abstract: The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techni… ▽ More The MURAVES experiment aims at the muographic imaging of the internal structure of the summit of Mt. Vesuvius, exploiting muons produced by cosmic rays. Though presently quiescent, the volcano carries a dramatic hazard in its highly populated surroundings. The challenging measurement of the rock density distribution in its summit by muography, in conjunction with data from other geophysical techniques, can help the modeling of possible eruptive dynamics. The MURAVES apparatus consists of an array of three independent and identical muon trackers, with a total sensitive area of 3 square meters. In each tracker, a sequence of 4 XY tracking planes made of plastic scintillators is complemented by a 60 cm thick lead wall inserted between the two downstream planes to improve rejection of background from low energy muons. The apparatus is currently acquiring data. Preliminary results from the analysis of a first data sample are presented. △ Less

Submitted 24 February, 2022; originally announced February 2022.

Comments: Conference Muography2021, 10 pages, 8 figures

DOME: Discrete oriented muon emission in GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco

Abstract: In this study, we exhibit a number elementary strategies that might be at disposal in diverse computational applications in the GEANT4 simulations with the purpose of hemispherical particle sources. To further detail, we initially generate random points on a spherical surface for a sphere of a practical radius by employing Gaussian distributions for the three components of the Cartesian coordinate… ▽ More In this study, we exhibit a number elementary strategies that might be at disposal in diverse computational applications in the GEANT4 simulations with the purpose of hemispherical particle sources. To further detail, we initially generate random points on a spherical surface for a sphere of a practical radius by employing Gaussian distributions for the three components of the Cartesian coordinates, thereby obtaining a generating surface for the initial positions of the corresponding particles. Since we do not require the half bottom part of the produced spherical surface for our tomographic applications, we take the absolute value of the vertical component in the Cartesian coordinates by leading to a half-spherical shell, which is traditionally called a hemisphere. Last but not least, we direct the generated particles into the target material to be irradiated by favoring a selective momentum direction that is based on the vector construction between the random point on the hemispherical surface and the origin of the target material, hereby optimizing the particle loss through the source biasing. In the end, we incorporate our strategy by using G4ParticleGun in the GEANT4 code. Furthermore, we also exhibit a second scheme that is based on the coordinate transformation from the spherical coordinates to the Cartesian coordinates, thereby reducing the number of random number generators. While we plan to exert our strategy in the computational practices for muon scattering tomography, this source scheme might find its straightforward applications in different neighboring fields including but not limited to atmospheric sciences, space engineering, and astrophysics where a 3D particle source is a necessity for the modeling goals. △ Less

Submitted 7 April, 2023; v1 submitted 18 February, 2022; originally announced February 2022.

Comments: 3 figures

The simulations chain of the MURAVES experiment

Authors: M. Moussawi, S. Basnet, L. Bonechi, L. Cimmino, R. DÁlessandro, M. DÉrrico, A. Giammanco, R. Karnam, G. Macedonio, C. Rendon, A. Samalan, G. Saracino, M. Tytgat

Abstract: The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo pro… ▽ More The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active and hazardous volcano near Naples, Italy. A detailed Monte Carlo simulation framework is necessary in order to investigate the effects of the experimental constraints and to perform comparisons with the actual observations. Our Monte Carlo setup combines a variety of Monte Carlo programs that address different aspects of cosmic muon simulation, from muon generation in the Earth's upper atmosphere to the response of the detector, including the interactions with the material of the volcano. We will elaborate on the rationale for our technical choices, including trade-off between speed and accuracy, and on the lessons learned, which are of general interest for similar use cases in muon radiography. △ Less

Submitted 7 February, 2022; originally announced February 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2109.14324

Towards a portable high-resolution muon detector based on Resistive Plate Chambers

Authors: S. Basnet, E. Cortina Gil, P. Demin, R. M. I. D. Gamage, A. Giammanco, R. Karnam, M. Moussawi, A. Samalan, M. Tytgat

Abstract: The use of conventional imaging techniques becomes problematic when faced with challenging logistics and confined environments. In particular, such scenarios are not unusual in the field of archaeological and mining explorations as well as for nuclear waste characterization. For these applications, even the use of muography is complicated since the detectors have to be deployed in difficult areas… ▽ More The use of conventional imaging techniques becomes problematic when faced with challenging logistics and confined environments. In particular, such scenarios are not unusual in the field of archaeological and mining explorations as well as for nuclear waste characterization. For these applications, even the use of muography is complicated since the detectors have to be deployed in difficult areas with limited room for instrumentation, e.g., narrow tunnels. To address this limitation, we have developed a portable muon detector (muoscope) based on glass Resistive Plate Chambers (RPC) with an active area of 16 $\times$ 16 cm$^{2}$. The specific design goals taken into consideration while develo** our first prototype are portability, robustness, autonomy, versatility, safety and low cost. To help further improve our design goals, we are currently studying the possibility to switch the sensitive units from strips in the old prototype to pixels for the new one However, for performing high resolution muography, the number of readout units per layer will also need to increase significantly, leading to increase in the overall cost and power consumption of the muoscope. To mitigate these issues, we are develo** a novel 2D multiplexing algorithm for reading out several pixels with a single electronic channel. In this article, we give an overview of the detector development, focusing mainly on the design goals and the choice of detector technology. Furthermore, we present the details of the expected changes in the new prototype as well as a simulated 2D multiplexing study based on general principles. △ Less

Submitted 2 February, 2022; originally announced February 2022.

Comments: 12 pages, 4 figures Also, proceeding article for the International Workshop on Cosmic-Ray Muography (Muography2021), submitted to Journal for Advanced Instrumentation in Science (JAIS)

Simulation of a first case study for magnetic field imaging with the Magic-$μ$ technique

Authors: Hamid Basiri, Tadahiro Kin, Naoya Okamoto, Eduardo Cortina Gil, Andrea Giammanco

Abstract: So far, most of the developments in muography (or cosmic-ray muon radiography) have been based on either the scattering or the absorption of cosmic-ray muons produced by the nuclear interactions between primary cosmic-rays and the nuclei of the Earth's atmosphere. Applications of muography are increasing in various disciplines. A new use of this technique to measure a magnetic field has recently b… ▽ More So far, most of the developments in muography (or cosmic-ray muon radiography) have been based on either the scattering or the absorption of cosmic-ray muons produced by the nuclear interactions between primary cosmic-rays and the nuclei of the Earth's atmosphere. Applications of muography are increasing in various disciplines. A new use of this technique to measure a magnetic field has recently been proposed by our group. This new application takes advantage of the electric charge of cosmic-ray muons, which causes them to change their trajectory due to the Lorentz force generated by a magnetic field. In this study, we present a feasibility study of the proposed technique by simulating a simple dipole magnet using the three-dimensional finite element solution package AMaze, together with the PHITS Monte Carlo simulation tools. The distribution of magnetic field flux densities around the magnet was calculated in AMaze and entered into the PHITS code. Positive and negative cosmic-ray muons were generated based on the PHITS-based analytical radiation model (PARMA). A comparison of the count rate maps of the detected muons on two position-sensitive scintillator detectors for the magnetic field ON and OFF was studied using PHITS. The simulation results show the effect of the magnet on the count rate maps and are promising for the newly proposed application of cosmic-ray muons, the imaging of a magnetic field. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Particle generation through restrictive planes in GEANT4 simulations for potential applications of cosmic ray muon tomography

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco

Abstract: In this study, by attempting to resolve the angular complication during the particle generation for the muon tomography applications in the GEANT4 simulations, we exhibit an unconventional methodology that is hinged on the direction limitation via the vectorial construction from the generation location to the restriction area rather than using a certain angular distribution or interval. In other w… ▽ More In this study, by attempting to resolve the angular complication during the particle generation for the muon tomography applications in the GEANT4 simulations, we exhibit an unconventional methodology that is hinged on the direction limitation via the vectorial construction from the generation location to the restriction area rather than using a certain angular distribution or interval. In other words, we favor a momentum direction that is determined by a vector constructed between an initial point randomly chosen on a generative point/plane and a latter point arbitrarily selected on a restrictive plane of the same dimensions with the basal cross section of the volume-of-interest (VOI). On account of setting out such a generation scheme, we optimize the particle loss by kee** an angular disparity that is directly dependent on the VOI geometry as well as the vertical position of the restrictive plane for a tomographic system of a finite size. We demonstrate our strategy for a set of target materials including aluminum, copper, iron, lead, and uranium with a dimension of 40$\times$10$\times$40 $\rm cm^{3}$ over three restrictive planes of different positions by using a discrete energy spectrum between 0.1 and 8 GeV and we compute the scattering angle, the number of absorption, and the particle loss. Upon our simulation outcomes, we show that the particle generation by means of restrictive planes is an effective strategy that is flexible towards a variety of computational objectives in the GEANT4 simulations. △ Less

Submitted 20 January, 2022; v1 submitted 18 January, 2022; originally announced January 2022.

Comments: 7 pages, 2 figures, 9 tables, ACAT 2021

On muon energy group structure based on deflection angle for application in muon scattering tomography: A Monte Carlo study through GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco, Mart Magi

Abstract: The average deflection angle of the tracked muons in the muon scattering tomography exponentially declines in function of the initial kinetic energy, the angular dependence of which provides an opportunity to set out a binary relation between the initial kinetic energy and the average deflection angle, thereby leading to a coarse energy prediction founded on the mean deflection angle in the case o… ▽ More The average deflection angle of the tracked muons in the muon scattering tomography exponentially declines in function of the initial kinetic energy, the angular dependence of which provides an opportunity to set out a binary relation between the initial kinetic energy and the average deflection angle, thereby leading to a coarse energy prediction founded on the mean deflection angle in the case of experimental incapabilities or limitations. In this study, we address the problem of the muon energy classification for a tomographic system consisting of 0.4-cm plastic scintillators manufactured from polyvinyl toluene and we explore a four-group structure besides a ternary partitioning between 0.25 and 8 GeV. In the first instance, we determine the deflection angles by tracking the hit locations in the detector layers on the sub-divided uniform energy intervals through the GEANT4 simulations. In the latter step, we express two misclassification probabilities where the first approach assumes a symmetrical linear propagation bounded by one standard deviation in one dimension, whereas the second procedure employs a positively defined modified Gaussian distribution that governs the overlap** area in two dimensions. In the final stage, we compare qualitatively and quantitatively the adjacent energy groups by using the computed misclassification probabilities. In the absence of any further data manipulation, we explicitly show that the misclassification probabilities increase when the number of energy groups augments. Furthermore, we also conclude that it is feasible to benefit from the mean deflection angle to roughly estimate the muon energies up to four energy groups by taking the misclassification probabilities into consideration, while the classification viability significantly diminishes when the partition number exceeds four on the basis of standard deviation. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Comments: 8 pages, 6 figures, 2 tables, RAP21

Journal ref: RAP Conference Proceedings 2021

Unveiling triangular correlation of angular deviation in muon scattering tomography by means of GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco, Mart Magi

Abstract: The angular deviation commonly represented by the scattering angle generally serves to provide the characteristic discrimination in the muon scattering tomography. The regular procedure to determine the scattering angle comprises the collection of exactly four hit locations in four detector layers among which two top detector layers are utilized to construct the first vector, whereas the second ve… ▽ More The angular deviation commonly represented by the scattering angle generally serves to provide the characteristic discrimination in the muon scattering tomography. The regular procedure to determine the scattering angle comprises the collection of exactly four hit locations in four detector layers among which two top detector layers are utilized to construct the first vector, whereas the second vector is built by using two bottom detector layers. Although this procedure acts to classify the target volumes in the tomographic systems based on the muon scattering, the scattering angle obtained through the usual methodology founded on four detector layers is dubious for not yielding any information about the position of target volume. Nonetheless, the same set of four detector layers also imparts the possibility of splitting the scattering angle into two separate angles by creating a triangular correlation in such a way that the scattering angle is referred to an exterior angle, whereas the separate angles are considered the interior opposite angles that are not neighboring this exterior angle. In this study, we first show that a combination of three detector layers out of four fulfills the calculation of the interior opposite angles. Then, by employing the GEANT4 simulations over our tomographic configuration composed of three plastic scintillators in either section, we demonstrate that the interior opposite angles differ towards the vertical spatial variation, while the exterior angle approximately remains constant, thereby implying a beneficial feature to be used for the image reconstruction purposes. △ Less

Submitted 2 December, 2021; v1 submitted 1 December, 2021; originally announced December 2021.

Comments: 5 pages, 3 figures, 1 table, International Workshop on Cosmic-Ray Muography (Muography2021)

A portable muon telescope for multidisciplinary applications

Authors: R. M. I. D Gamage, S. Basnet, E. Cortina Gil, P. Demin, A. Giammanco, R. Karnam, M. Moussawi, M. Tytgat, .

Abstract: Muon tomography or muography is an emerging imaging technique that uses cosmogenic muons as the radiation source. Due to its diverse range of applications and the use of natural radiation, muography is being applied across many fields such as geology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. Muons can be detected using va… ▽ More Muon tomography or muography is an emerging imaging technique that uses cosmogenic muons as the radiation source. Due to its diverse range of applications and the use of natural radiation, muography is being applied across many fields such as geology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground surveys, etc. Muons can be detected using various detector technologies, among which, resistive plate chambers (RPC) are a very cost effective choice. RPCs are planar detectors which use ionization in a thin gas gap to detect cosmic muons, already used since years in major particle accelerator experiments. We have developed a muon telescope (or muoscope) composed of small scale RPCs. The design goal for our muoscope is to be portable and autonomous, in order to take data in places that are not easily accessible. The whole setup is light and compact, such to be easily packed in a car trunk. Individual RPCs are hosted in gas-tight aluminium cases. There is no need for gas bottles, once the chambers are filled. The muoscope can be controlled from a reasonable distance using wireless connection. In this paper, we summarize the guiding principles of our project and present some recent developments and future prospects, including a long-term stability study of the resistivity of the semiconductive coating obtained with serigraphy. △ Less

Submitted 29 September, 2021; originally announced September 2021.

Comments: 8 pages, 7 figures, Proceedings paper for the XXII International Workshop on Radiation Imaging Detectors - iWoRiD 2021

End-to-end simulations of the MUon RAdiography of VESuvius experiment

Authors: A. Samalan, S. Basnet, L. Bonechi, L. Cimmino, R. D. Alessandro, M. D. Errico, A. Giammanco, R. Karnam, G. Macedonio, M. Moussawi, C. Rendon, G. Saracino, M. Tytgat

Abstract: The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development… ▽ More The MUon RAdiography of VESuvius (MURAVES) project aims at the study of the summital cone of Mt. Vesuvius, an active volcano near Naples (Italy), by measuring its density profile through muon flux attenuation. Its data, combined with those from gravimetric and seismic measurement campaigns, will be used for better defining the volcanic plug at the bottom of the crater. We report on the development of an end-to-end simulation framework, in order to perform accurate investigations of the effects of the experimental constraints and to compare simulations, under various model hypotheses, with the actual observations. The detector simulation setup is developed using GEANT4 and a study of cosmic particle generators has been conducted to identify the most suitable one for our simulation framework. To mimic the real data, GEANT4 raw hits are converted to clusters through a simulated digitization: energy deposits are first summed per scintillator bar, and then converted to number of photoelectrons with a data-driven procedure. This is followed by the same clustering algorithm and same tracking code as in real data. We also report on the study of muon transport through rock using PUMAS and GEANT4. In this paper we elaborate on the rationale for our technical choices, including trade-off between speed and accuracy. The developments reported here are of general interest in muon radiography and can be applied in similar cases. △ Less

Submitted 17 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Effect of passive metallic layers on muon energy estimation by means of deflection angle for muon scattering tomography: A comparative study based on GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco, Mart Magi

Abstract: In the tomographic configurations based on the muon scattering, the angular variation with respect to the kinetic energy indirectly brings forth the ability to coarsely predict the kinetic energy by using the deflection angle owing to the detector layers. Nevertheless, the angular deviation due to the detector components is expected to be minuscule in addition to a relatively high uncertainty in t… ▽ More In the tomographic configurations based on the muon scattering, the angular variation with respect to the kinetic energy indirectly brings forth the ability to coarsely predict the kinetic energy by using the deflection angle owing to the detector layers. Nevertheless, the angular deviation due to the detector components is expected to be minuscule in addition to a relatively high uncertainty in the case of the plastic scintillators. In the present study, we contrast our current tomographic prototype, which consists of the detector layers manufactured from polyvinyl toluene besides a detector accuracy of 1 mrad, with an alternative hodoscope scheme containing stainless steel layers by aiming to investigate the three-group energy structure. Initially, we determine the average deflection angles together with the corresponding standard deviations for our present setup as well as for the alternative scheme by means of the GEANT4 simulations. In the second place, we express a brace of misclassification probabilities founded on the standard deviations where the first procedure assumes a linear finite approximation, whereas the latter approach rests on a positively defined modified Gaussian distribution. Upon our simulation results, we demonstrate that the introduced stainless steel layers in the proposed hodoscope setup do not only serve to augment the average deflection angles, but they also diminish the misclassification probabilities, therewith reducing the classification uncertainty apart from an improved detection performance. △ Less

Submitted 3 December, 2021; v1 submitted 22 September, 2021; originally announced September 2021.

Comments: 8 pages, 4 figures, 2 tables, 22nd International Workshop on Radiation Imaging Detectors (iWoRiD2021)

Non-destructive interrogation of nuclear waste barrels through muon tomography: A Monte Carlo study based on dual-parameter analysis via GEANT4 simulations

Authors: Ahmet Ilker Topuz, Madis Kiisk, Andrea Giammanco

Abstract: In this study, we employ the Monte Carlo simulations by using the GEANT4 code to demonstrate the capability of muon tomography based on the dual-parameter analysis in the examination of the nuclear waste barrels. Our current hodoscope setup consists of three top and three bottom plastic scintillators made of polyvinyl toluene with the thickness of 0.4 cm, and the composite target material is a cyl… ▽ More In this study, we employ the Monte Carlo simulations by using the GEANT4 code to demonstrate the capability of muon tomography based on the dual-parameter analysis in the examination of the nuclear waste barrels. Our current hodoscope setup consists of three top and three bottom plastic scintillators made of polyvinyl toluene with the thickness of 0.4 cm, and the composite target material is a cylindrical nuclear waste drum with the height of 96 cm and the radius of 29.6 cm where the outermost layer is stainless steel with the lateral thickness of 3.2 cm and the filling material is ordinary concrete that encapsulates the nuclear materials of dimensions 20$\times$20$\times$20 cm$^{3}$. By simulating with a narrow planar muon beam of 1$\times$1 cm$^{2}$ over the uniform energy interval between 0.1 and 8 GeV, we determine the variation of the average scattering angle together with the standard deviation by utilizing a 0.5-GeV bin length, the counts of the scattering angle by using a 1-mrad step, and the number of the absorption events for the five prevalent nuclear materials starting from cobalt and ending in plutonium. Via the duo-parametric analysis that is founded on the scattering angle as well as the absorption in the present study, we show that the presence of the nuclear materials in the waste barrels is numerically visible in comparison with the concrete-filled waste drum without any nuclear material, and the muon tomography is capable of distinguishing these nuclear materials by coupling the information about the scattering angle and the number of absorption in the cases where one of these two parameters yields strong similarity for certain nuclear materials. △ Less

Submitted 18 October, 2022; v1 submitted 27 June, 2021; originally announced June 2021.

Comments: 9 pages, 5 figures, 3 tables

Advances in Multi-Variate Analysis Methods for New Physics Searches at the Large Hadron Collider

Authors: Anna Stakia, Tommaso Dorigo, Giovanni Banelli, Daniela Bortoletto, Alessandro Casa, Pablo de Castro, Christophe Delaere, Julien Donini, Livio Finos, Michele Gallinaro, Andrea Giammanco, Alexander Held, Fabricio Jiménez Morales, Grzegorz Kotkowski, Seng Pei Liew, Fabio Maltoni, Giovanna Menardi, Ioanna Papavergou, Alessia Saggio, Bruno Scarpa, Giles C. Strong, Cecilia Tosciri, João Varela, Pietro Vischia, Andreas Weiler

Abstract: Between the years 2015 and 2019, members of the Horizon 2020-funded Innovative Training Network named "AMVA4NewPhysics" studied the customization and application of advanced multivariate analysis methods and statistical learning tools to high-energy physics problems, as well as developed entirely new ones. Many of those methods were successfully used to improve the sensitivity of data analyses per… ▽ More Between the years 2015 and 2019, members of the Horizon 2020-funded Innovative Training Network named "AMVA4NewPhysics" studied the customization and application of advanced multivariate analysis methods and statistical learning tools to high-energy physics problems, as well as developed entirely new ones. Many of those methods were successfully used to improve the sensitivity of data analyses performed by the ATLAS and CMS experiments at the CERN Large Hadron Collider; several others, still in the testing phase, promise to further improve the precision of measurements of fundamental physics parameters and the reach of searches for new phenomena. In this paper, the most relevant new tools, among those studied and developed, are presented along with the evaluation of their performances. △ Less

Submitted 22 November, 2021; v1 submitted 16 May, 2021; originally announced May 2021.

Comments: 101 pages, 21 figures, submitted to Elsevier. [v2]: Updated to published version (in 'Reviews in Physics')

Journal ref: Rev. Phys. 7 (2021) 100063

Towards portable muography with small-area, gas-tight glass Resistive Plate Chambers

Authors: S. Basnet, E. Cortina Gil, P. Demin, R. M. I. D. Gamage, A. Giammanco, M. Moussawi, M. Tytgat, S. Wuyckens

Abstract: Imaging techniques that use atmospheric muons, collectively named under the neologism "muography", have seen a tremendous growth in recent times, mainly due to their diverse range of applications. The most well-known ones include but are not limited to: volcanology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground map**, etc. These methods a… ▽ More Imaging techniques that use atmospheric muons, collectively named under the neologism "muography", have seen a tremendous growth in recent times, mainly due to their diverse range of applications. The most well-known ones include but are not limited to: volcanology, archaeology, civil engineering, nuclear reactor monitoring, nuclear waste characterization, underground map**, etc. These methods are based on the attenuation or deviation of muons to image large and/or dense objects where conventional techniques cannot work or their use becomes challenging. In this context, we have constructed a muography telescope based on "mini glass-RPC planes" following a design similar to the glass-RPC detectors developed by the CALICE Collaboration and used by the TOMUVOL experiment in the context of volcano radiography, but with smaller active area (16 $\times$ 16 cm$^{2}$). The compact size makes it an attractive choice with respect to other detectors previously employed for imaging on similar scales. An important innovation in this design is that the detectors are sealed. This makes the detector more portable and solves the usual safety and logistic issues for gas detectors operated underground and/or inside small rooms. This paper provides an overview on our guiding principles, the detector development and our operational experiences. Drawing on the lessons learnt from the first prototype, we also discuss our future direction for an improved second prototype, focusing primarily on a recently adopted serigraphy technique for the resistive coating of the glass plates. △ Less

Submitted 8 December, 2020; v1 submitted 19 May, 2020; originally announced May 2020.

Comments: 8 pages, 7 figures, XV Workshop on Resistive Plate Chambers and Related Detectors (RPC2020)

Journal ref: Journal of Instrumentation, Volume 15, October 2020

Atmospheric muons as an imaging tool

Authors: Lorenzo Bonechi, Raffaello D'Alessandro, Andrea Giammanco

Abstract: Imaging methods based on the absorption or scattering of atmospheric muons, collectively named under the neologism "muography", exploit the abundant natural flux of muons produced from cosmic-ray interactions in the atmosphere. Recent years have seen a steep rise in the development of muography methods in a variety of innovative multidisciplinary approaches to study the interior of natural or man-… ▽ More Imaging methods based on the absorption or scattering of atmospheric muons, collectively named under the neologism "muography", exploit the abundant natural flux of muons produced from cosmic-ray interactions in the atmosphere. Recent years have seen a steep rise in the development of muography methods in a variety of innovative multidisciplinary approaches to study the interior of natural or man-made structures, establishing synergies between usually disconnected academic disciplines such as particle physics, geology, and archaeology. Muography also bears promise of immediate societal impact through geotechnical investigations, nuclear waste surveys, homeland security, and natural hazard monitoring. Our aim is to provide an introduction to this vibrant research area, starting from the physical principles at the basis of the methods and reviewing several recent developments in the application of muography methods to specific use cases, without any pretence of exhaustiveness. We then describe the main detector technologies and imaging methods, including their combination with conventional techniques from other disciplines, where appropriate. Finally, we discuss critically some outstanding issues that affect a broad variety of applications, and the current state of the art in addressing them. △ Less

Submitted 10 June, 2019; originally announced June 2019.

Comments: Submitted to Reviews in Physics

Journal ref: Reviews in Physics 5 (2020) 100038

A portable muon telescope based on small and gas-tight Resistive Plate Chambers

Authors: Sophie Wuyckens, Andrea Giammanco, Pavel Demin, Eduardo Cortina Gil

Abstract: We report on the first steps in the development of a small-size muon telescope based on glass Resistive Plate Chambers with small active area ($16\times 16~{\rm cm}^2$). The long-term goal of this project is to focus on applications of muography where the telescope may have to be operated underground and/or inside small rooms, and in challenging logistic situations. Driving principles in our desig… ▽ More We report on the first steps in the development of a small-size muon telescope based on glass Resistive Plate Chambers with small active area ($16\times 16~{\rm cm}^2$). The long-term goal of this project is to focus on applications of muography where the telescope may have to be operated underground and/or inside small rooms, and in challenging logistic situations. Driving principles in our design are therefore compact size, light weight, gas tightness, and robustness. The first data-taking experiences have been encouraging, and we elaborate on the lessons learnt and future directions for development. △ Less

Submitted 18 December, 2018; v1 submitted 18 June, 2018; originally announced June 2018.

Comments: Proceedings of the "Cosmic-Ray Muography" meeting of the Royal Society, 14-15 May 2018 at the Kavli Royal Society Centre, Chicheley Hall, Newport Pagnell (UK)

Report number: CP3-18-36

Journal ref: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 377, No. 2137, January 2019

Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker

Authors: W. Adam, T. Bergauer, M. Dragicevic, M. Friedl, R. Fruehwirth, M. Hoch, J. Hrubec, M. Krammer, W. Treberspurg, W. Waltenberger, S. Alderweireldt, W. Beaumont, X. Janssen, S. Luyckx, P. Van Mechelen, N. Van Remortel, A. Van Spilbeeck, P. Barria, C. Caillol, B. Clerbaux, G. De Lentdecker, D. Dobur, L. Favart, A. Grebenyuk, Th. Lenzi , et al. (663 additional authors not shown)

Abstract: The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi… ▽ More The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations. △ Less

Submitted 7 May, 2015; originally announced May 2015.

Journal ref: 2016 JINST 11 P04023