Showing 1–5 of 5 results for author: Ghosh, U U

Jamming modulates coalescence dynamics of shear-thickening colloidal droplets

Authors: M. V. R. Sudheer, Sarath Chandra Varma, Aloke Kumar, Udita U. Ghosh

Abstract: Recent investigations into coalescence dynamics of complex fluid droplets revealed the existence of sub-Newtonian behaviour for polymeric fluids (elastic and shear thinning). We hypothesize that such delayed coalescence or sub-Newtonian coalescence dynamics may be extended to the general class of shear thickening fluids. To investigate this droplets of aqueous corn-starch suspensions were chosen a… ▽ More Recent investigations into coalescence dynamics of complex fluid droplets revealed the existence of sub-Newtonian behaviour for polymeric fluids (elastic and shear thinning). We hypothesize that such delayed coalescence or sub-Newtonian coalescence dynamics may be extended to the general class of shear thickening fluids. To investigate this droplets of aqueous corn-starch suspensions were chosen and its coalescence in sessile pendant configuration was probed by high-speed real time imaging. Temporal evolution of the neck (growth) during coalescence was quantified as a function of suspended particle weight fraction φ_w. The necking behaviour was found to evolve as the power-law relation $R=at^b$ where R is neck radius with exponent $\b\le0.5$ implying it is a subset of the generic sub-Newtonian coalescence. Second significant delay in the coalescence dynamics is observed for particle fractions beyond the jamming fraction {\ φ}_w>\ φ_J\geq0.35}. Our proposed theoretical model captures this delay implicitly through altered suspension viscosity stemming from increased particle content. △ Less

Submitted 28 October, 2023; originally announced October 2023.

Contact line pinning and de-pinning can modulate the rod-climbing effect

Authors: Navin Kumar Chandra, Udita. U. Ghosh, Aniruddha Saha, Aloke Kumar

Abstract: Our experiments on the rod-climbing effect with an oil-coated rod revealed two key differences in the rod-climbing phenomena compared to a bare rod. On one hand, an enhancement in magnitude of climbing height for any particular value of rod rotation speed and second, a decrease in threshold rod rotation speed required for the appearance of the rod-climbing effect were observed. Observed phenomena… ▽ More Our experiments on the rod-climbing effect with an oil-coated rod revealed two key differences in the rod-climbing phenomena compared to a bare rod. On one hand, an enhancement in magnitude of climbing height for any particular value of rod rotation speed and second, a decrease in threshold rod rotation speed required for the appearance of the rod-climbing effect were observed. Observed phenomena is explained by considering the contact line behavior at the rod-fluid interface. Transient evolution of meniscus at the rod-fluid interface revealed that the three-phase contact line was pinned for a bare rod and de-pinned for an oil-coated rod. We modelled the subject fluid as a Giesekus fluid to predict the climbing height. The differences in the contact line behaviour were incorporated via the contact angle at the rod-fluid interface as a boundary condition. An agreement was found between the observed and predicted climbing height establishing that contact line behaviour may modulate rod-climbing effect. △ Less

Submitted 11 July, 2021; originally announced July 2021.

Pitcher Plant Inspired Biomimetic Liquid Infused Slippery Surface Using Taro Leaf

Authors: Rahul Sharma, Sankha Shuvra Das, Udita Uday Ghosh, Sunando DasGupta, Suman Chakraborty

Abstract: Bio-inspired anti-wetting surfaces, such as lotus leaf or pitcher plant, have led to the development of stable liquid infused slippery surfaces for various scientific applications. The present work demonstrates the use of biomimetic superhydrophobic surface (inspired from taro leaf) for fabrication of a stable air-liquid film. The taro leaf replica is fabricated on PDMS using two step soft-molding… ▽ More Bio-inspired anti-wetting surfaces, such as lotus leaf or pitcher plant, have led to the development of stable liquid infused slippery surfaces for various scientific applications. The present work demonstrates the use of biomimetic superhydrophobic surface (inspired from taro leaf) for fabrication of a stable air-liquid film. The taro leaf replica is fabricated on PDMS using two step soft-molding technique, where microstructures of the replicated surface are used to retain silicone oil layer to form a stable slippery surface. The fabricated surface exhibits a low contact angle hysteresis (CAH) of 2°, with sliding angle (SA) of 1.1°, which further affirms the super-slippery nature of the surface. Furthermore, it also shows excellent self-repairing ability, thermal stability and long-term durability of the oil coating against high shear rates, high impact droplets etc. We thus envisage that the present method of fabrication of slippery surface is simple and economical, and thus useful for various applications such as water drag reduction, self-cleaning, anti-fogging, anti-fouling etc. △ Less

Submitted 17 December, 2018; originally announced December 2018.

Comments: 23 pages

Liquid crystal induced elasto-capillary suppression of crack formation in thin colloidal films

Authors: Udita Uday Ghosh, Jayabrata Dhar, Suman Chakraborty, Sunando DasGupta

Abstract: Drying of colloidal droplets on solid, rigid substrates is associated with a capillary pressure develo** within the droplet. In due course of time, the capillary pressure builds up due to droplet evaporation resulting in the formation of a colloidal thin film that is prone to crack formation. In this study, we show that introducing a minimal amount of nematic liquid crystal (NLC) can completely… ▽ More Drying of colloidal droplets on solid, rigid substrates is associated with a capillary pressure develo** within the droplet. In due course of time, the capillary pressure builds up due to droplet evaporation resulting in the formation of a colloidal thin film that is prone to crack formation. In this study, we show that introducing a minimal amount of nematic liquid crystal (NLC) can completely suppress the crack formation. The mechanism behind the curbing of the crack formation may be attributed to the capillary stress-absorbing cushion provided by the elastic arrangements of the liquid crystal at the substrate-droplet interface. Cracks and allied surface instabilities are detrimental to the quality of the final product like surface coatings, and therefore, its suppression by an external inert additive is a promising technique that will be of immense importance for several industrial applications. We believe this fundamental investigation of crack suppression will open up an entire avenue of applications for the NLCs in the field of coatings, broadening its already existing wide range of benefits. △ Less

Submitted 2 February, 2017; originally announced February 2017.

Wettability Induced Crack Dynamics and Morphology

Authors: Udita Uday Ghosh, Monojit Chakraborty, Aditya Bikram Bhandari, Suman Chakraborty, Sunando DasGupta

Abstract: Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural drying to outline the effects of substrate surface energies over the dry-out characteristics with emphasis on crack dynamics, crack morphology and underlying par… ▽ More Substrate wettability alteration induced control over crack formation process in thin colloidal films has been addressed in the present study. Colloidal nanosuspension (53nm, mean particle diameter) droplets have been subjected to natural drying to outline the effects of substrate surface energies over the dry-out characteristics with emphasis on crack dynamics, crack morphology and underlying particle arrangements. Experimental findings indicate that number of cracks formed decreases with increase in substrate hydrophobicity. These physical phenomena have been explained based on the magnitude of stress dissipation incurred by the substrate. DLVO predictions are also found to be in tune with the reported experimental investigations. △ Less

Submitted 3 December, 2014; originally announced December 2014.