-
Molecular Insights into the Water Dissociation and Proton Dynamics at the $β$-TaON (100)/Water Interface
Authors:
Sagarmoy Mandal,
Tushar Kanti Ghosh
Abstract:
Understanding the dynamic nature of the semiconductor-water interface is crucial for develo** efficient photoelectrochemical water splitting catalysts, as it governs reactivity through charge and mass transport. In this study, we employ ab initio molecular dynamics simulations to investigate the structural and dynamical properties of water at the $β$-TaON (100) surface. We observed that a well-d…
▽ More
Understanding the dynamic nature of the semiconductor-water interface is crucial for develo** efficient photoelectrochemical water splitting catalysts, as it governs reactivity through charge and mass transport. In this study, we employ ab initio molecular dynamics simulations to investigate the structural and dynamical properties of water at the $β$-TaON (100) surface. We observed that a well-defined interface is established through the spontaneous dissociation of water and the reorganization of surface chemical bonds. This leads to the formation of a partially hydroxylated surface, accompanied by a strong network of hydrogen bonds at the TaON-water interface. Consequently, various proton transport routes, including the proton transfer through "low-barrier hydrogen bond" path, become active across the interface, dramatically increasing the overall rate of the proton hop** at the interface. Based on our findings, we propose that the observed high photocatalytic activity of TaON-based semiconductors could be attributed to the spontaneous water dissociation and the resulting high proton transfer rate at the interface.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Controlling polymer translocation with crowded medium and polymer length asymmetry
Authors:
Vrinda Garg,
Rejoy Mathew,
Riyan Ibrahim,
Kulveer Singh,
Surya K. Ghosh
Abstract:
Polymer translocation in crowded environments is a ubiquitous phenomenon in biological systems. We studied polymer translocation through a pore in free, one-sided (asymmetric), and two-sided (symmetric) crowded environments. Extensive Langevin dynamics simulation is employed to model the dynamics of the flexible polymer and crowding particles. We studied how crowding size and packing fraction play…
▽ More
Polymer translocation in crowded environments is a ubiquitous phenomenon in biological systems. We studied polymer translocation through a pore in free, one-sided (asymmetric), and two-sided (symmetric) crowded environments. Extensive Langevin dynamics simulation is employed to model the dynamics of the flexible polymer and crowding particles. We studied how crowding size and packing fraction play a crucial role in the translocation process. After determining the standard scaling properties of the translocation probability, time, and MSD, we observed that the translocation rate and bead velocities are location-dependent as we move along the polymer backbone, even in a crowd-free environment. Counter-intuitively, translocation rate and bead velocities showed the opposite behavior; for example, middle monomers near the pore exhibit maximum bead velocity and minimum translocation rate. Free energy calculation for asymmetrically placed polymer indicates there exists a critical number of segments that make the polymer to prefer the receiver side for translocation. For one-sided crowding, we have identified a critical crowding size above which there exists a non-zero probability to translocate into the crowding side instead of the free side. Moreover, we have observed that shifting the polymer towards the crowded side compensates for one-sided crowding, yielding an equal probability akin to a crowder-free system. Under two-sided crowding, the mechanism of how a slight variation in crowder size and packing fraction can force a polymer to switch its translocation direction is proposed, which has not been explored before. Using this control we achieved an equal translocation probability like a crowd-free scenario. These conspicuous yet counter-intuitive phenomena are rationalized by simple theoretical arguments based on osmotic pressure and radial entropic forces.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
First (calibration) experiment using proton beam from FRENA at SINP
Authors:
C. Basu,
K. Banerjee,
T. K. Ghosh,
G. Mukherjee,
C. Bhattacharya,
Shraddha S Desai,
R. Shil,
A. K. Saha,
J. K. Meena,
T. Bar,
D. Basak,
L. K. Sahoo,
S. Saha,
C. Marick,
D. Das,
D. Das,
D. Das,
M. Kujur,
S. Roy,
S. S. Basu,
U. Gond,
A. Saha,
A. Das,
M. Samanta,
P. Saha
, et al. (1 additional authors not shown)
Abstract:
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift.
△ Less
Submitted 24 January, 2024;
originally announced February 2024.
-
Unbiasing Enhanced Sampling on a High-dimensional Free Energy Surface with Deep Generative Model
Authors:
Yikai Liu,
Tushar K. Ghosh,
Guang Lin,
Ming Chen
Abstract:
Biased enhanced sampling methods utilizing collective variables (CVs) are powerful tools for sampling conformational ensembles. Due to high intrinsic dimensions, efficiently generating conformational ensembles for complex systems requires enhanced sampling on high-dimensional free energy surfaces. While methods like temperature-accelerated molecular dynamics (TAMD) can adopt many CVs in a simulati…
▽ More
Biased enhanced sampling methods utilizing collective variables (CVs) are powerful tools for sampling conformational ensembles. Due to high intrinsic dimensions, efficiently generating conformational ensembles for complex systems requires enhanced sampling on high-dimensional free energy surfaces. While methods like temperature-accelerated molecular dynamics (TAMD) can adopt many CVs in a simulation, unbiasing the simulation requires accurate modeling of a high-dimensional CV probability distribution, which is challenging for traditional density estimation techniques. Here we propose an unbiasing method based on the score-based diffusion model, a deep generative learning method that excels in density estimation across complex data landscapes. We test the score-based diffusion unbiasing method on TAMD simulations. The results demonstrate that this unbiasing approach significantly outperforms traditional unbiasing methods, and can generate accurate unbiased conformational ensembles for simulations with a number of CVs higher than usual ranges.
△ Less
Submitted 17 December, 2023; v1 submitted 14 December, 2023;
originally announced December 2023.
-
Driven transport of active particles through arrays of symmetric obstacles
Authors:
Shubhadip Nayak,
Sohom Das,
Poulami Bag,
Tanwi Debnath,
Pulak K. Ghosh
Abstract:
We numerically examine the driven transport of an overdamped self-propelled particle through a two-dimensional array of circular obstacles. A detailed analysis of transport quantifiers (mobility and diffusivity) has been performed for two types of channels, {\it channel I} and {\it channel II}, that respectively correspond to the parallel and diagonal drives with respect to the array axis. Our sim…
▽ More
We numerically examine the driven transport of an overdamped self-propelled particle through a two-dimensional array of circular obstacles. A detailed analysis of transport quantifiers (mobility and diffusivity) has been performed for two types of channels, {\it channel I} and {\it channel II}, that respectively correspond to the parallel and diagonal drives with respect to the array axis. Our simulation results show that the signatures of pinning actions and depinning processes in the array of obstacles are manifested through excess diffusion peaks or sudden drops in diffusivity, and abrupt jumps in mobility with varying amplitude of the drive. The underlying depinning mechanisms and the associated threshold driving strength largely depend on the persistent length of self-propulsion. For low driving strength, both diffusivity and mobility are noticeably suppressed by the array of obstacles, irrespective of the self-propulsion parameters and direction of the drive. When self-propulsion length is larger than a channel compartment size, transport quantifiers are insensitive to the rotational relaxation time. Transport with diagonal drives features self-propulsion-dependent negative differential mobility. The amplitude of the negative differential mobility of an active particle is much larger than that of a passive one. The present analysis aims at understanding the driven transport of active species like, bacteria, virus, Janus Particle etc. in porous medium.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Determination of Thermal Conductivity of phase pure 10H-SiC Thin Films by non-destructive Raman Thermometry
Authors:
Madhusmita Sahoo,
Kalyan Ghosh,
Swayamprakash Sahoo,
Pratap K. Sahoo,
Tom Mathews,
Sandip Dhara
Abstract:
10 H SiC thin films are potential candidates for devices that can be used in high temperature and high radiation environment. Measurement of thermal conductivity of thin films by a non-invasive method is very useful for such device fabrication. Micro-Raman method serves as an important tool in this aspect and is known as Raman Thermometry. It utilises a steady-state heat transfer model in a semi-i…
▽ More
10 H SiC thin films are potential candidates for devices that can be used in high temperature and high radiation environment. Measurement of thermal conductivity of thin films by a non-invasive method is very useful for such device fabrication. Micro-Raman method serves as an important tool in this aspect and is known as Raman Thermometry. It utilises a steady-state heat transfer model in a semi-infinite half space and provides for an effective technique to measure thermal conductivity of films as a function of film thickness and laser spot size. This method has two limiting conditions i.e. thick film limit and thin film limit. The limiting conditions of this model was explored by simulating the model for different film thicknesses at constant laser spot size. 10H SiC films of three different thicknesses i.e. 104, 135 and 156 nm were chosen to validate the thin film limiting condition. It was found that the ideal thickness at which this method can be utilised for calculating thermal conductivity is 156 nm. Thermal conductivity of 156 nm film is found to be 102.385 $(Wm^{-1}K^{-1})$.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Understanding the polaritonic ground state in cavity quantum electrodynamics
Authors:
Tor S. Haugland,
John P. Philbin,
Tushar K. Ghosh,
Ming Chen,
Henrik Koch,
Prineha Narang
Abstract:
Molecular polaritons arise when molecules interact so strongly with light that they become entangled with each other. This light-matter hybridization alters the chemical and physical properties of the molecular system and allows chemical reactions to be controlled without the use of external fields. We investigate the impact of strong light-matter coupling on the electronic structure using perturb…
▽ More
Molecular polaritons arise when molecules interact so strongly with light that they become entangled with each other. This light-matter hybridization alters the chemical and physical properties of the molecular system and allows chemical reactions to be controlled without the use of external fields. We investigate the impact of strong light-matter coupling on the electronic structure using perturbative approaches and demonstrate that Rayleigh-Schrödinger perturbation theory can reproduce the ground state energies in optical cavities to comparable accuracy as ab initio cavity quantum electrodynamics methodologies for currently relevant coupling strengths. The method is effective in both low and high cavity frequency regimes and straightforward to implement via response functions. Furthermore, we establish simple relations between cavity-induced intermolecular forces and van der Waals forces. These findings provide valuable insight into the manipulation of ground-state polaritonic energy landscapes, shedding light on the systems and conditions in which modifications can be achieved.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Laser based optical interferometer manometer design for primary pressure standard in India
Authors:
Manoj Das,
Sandip Kumar Ghosh,
Kuldeep Kumar,
Elizabeth Jeessa James,
Megha Singh,
Ashok Kumar
Abstract:
The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used to realize Pascal. Such a realization is mercury-free and environmentally friendly and does not depend on any mechanical motions as in piston gauges and is based…
▽ More
The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used to realize Pascal. Such a realization is mercury-free and environmentally friendly and does not depend on any mechanical motions as in piston gauges and is based on physical constants. It consists of an optical Fabry-Perot cavity as a refractometer and is based on the measurement of the resonant frequency of the cavity using lasers. In this paper, we report the theoretical calculations for such an optical cavity and discuss various parameters for the laser required for develo** such a cavity-based refractometer system. We present the mechanical design for the dual cavity and an all-fiber optical set-up to be used for the next generation of primary pressure standards in the barometric region of pressure at CSIR-National physical laboratory, India.
△ Less
Submitted 17 June, 2023;
originally announced July 2023.
-
A Zero-Threshold PT-Symmetric Polariton-Raman Laser
Authors:
Avijit Dhara,
Devarshi Chakrabarty,
Pritam Das,
Kritika Ghosh,
Ayan Roy Chaudhuri,
Sajal Dhara
Abstract:
Parity-time (PT)-symmetry in the classical regime has been realized in optics by introducing loss and gain in electromagnetic wave propagation which has yielded numerous applications like nonreciprocal propagation and finite threshold single-mode lasers. However, PT-symmetry in the quantum regime so far remains elusive. Here, we demonstrate a PT-symmetric zero-threshold polariton-Raman laser by ut…
▽ More
Parity-time (PT)-symmetry in the classical regime has been realized in optics by introducing loss and gain in electromagnetic wave propagation which has yielded numerous applications like nonreciprocal propagation and finite threshold single-mode lasers. However, PT-symmetry in the quantum regime so far remains elusive. Here, we demonstrate a PT-symmetric zero-threshold polariton-Raman laser by utilizing stimulated resonant Raman scattering of polarized exciton-polaritons. By pum** resonantly at the exceptional point of polariton bands with non-Hermitian topology, a quantum PT-symmetric phase is realized when the Raman-active phonon mode frequencies match with the polariton mode frequency difference. The PT-symmetric phase corresponding to zero-threshold lasing can be switched to PT broken phase showing a finite threshold via cavity detuning by the variation of bath temperature or pump polarization. Our realization of PT-symmetry in the quantum regime and consequently the zero-threshold laser can open up applications in quantum information and stimulate new research activities in cavity quantum electrodynamics.
△ Less
Submitted 27 July, 2023; v1 submitted 27 May, 2023;
originally announced May 2023.
-
Anisotropic exciton polariton pairs as a platform for PT-symmetric non-Hermitian physics
Authors:
Devarshi Chakrabarty,
Avijit Dhara,
Pritam Das,
Kritika Ghosh,
Ayan Roy Chaudhuri,
Sajal Dhara
Abstract:
Non-Hermitian systems with parity-time (PT) symmetry have been realized using optical constructs in the classical domain, leading to a plethora of non-intuitive phenomena. However, PT-symmetry in purely quantum non-Hermitian systems like microcavity exciton-polaritons has not been realized so far. Here we show how a pair of nearly orthogonal sets of anisotropic exciton-polaritons can offer a versa…
▽ More
Non-Hermitian systems with parity-time (PT) symmetry have been realized using optical constructs in the classical domain, leading to a plethora of non-intuitive phenomena. However, PT-symmetry in purely quantum non-Hermitian systems like microcavity exciton-polaritons has not been realized so far. Here we show how a pair of nearly orthogonal sets of anisotropic exciton-polaritons can offer a versatile platform for realizing multiple spectral degeneracies called Exceptional Points (EPs) and propose a roadmap to achieve a PT-symmetric system. Polarization-tunable coupling strength creates one class of EPs, while Voigt EPs are observed for specific orientations where splitting of polariton modes due to birefringence is compensated by Transverse Electric (TE) -Transverse Magnetic (TM) mode splitting. Thus, paired sets of polarized anisotropic microcavity exciton-polaritons can offer a promising platform not only for fundamental research in non-Hermitian quantum physics and topological polaritons, but also, we propose that it will be critical for realizing zero threshold lasers.
△ Less
Submitted 31 May, 2023; v1 submitted 27 May, 2023;
originally announced May 2023.
-
Performance assessment of vehicle interdiction strategies in a simulation based environment on a complex transportation network
Authors:
Sukanya Samanta,
Jatin Uniyal,
Goutam Sen,
Soumya Kanti Ghosh
Abstract:
We consider the escape interdiction problem in a transportation network. In the absence of traffic in the network, the criminal/attacker tries to escape from the city using any of the shortest paths from the crime scene to any randomly chosen exit point. In the presence of traffic, the attacker chooses the optimal path, which takes minimum time to reach his destination. On the contrary, police/def…
▽ More
We consider the escape interdiction problem in a transportation network. In the absence of traffic in the network, the criminal/attacker tries to escape from the city using any of the shortest paths from the crime scene to any randomly chosen exit point. In the presence of traffic, the attacker chooses the optimal path, which takes minimum time to reach his destination. On the contrary, police/defenders try to interdict the criminal on his escape route. This is a challenging task for police with limited resources. Again, a real city road network is also complex in nature. First, we develop a simulation-based model for the optimal allocation of resources using the SUMO simulator. Next, we focus on develo** a more advanced search strategy like routing with optimal resource allocation. We develop a novel meta-heuristic approach in a simulation environment to interdict the attacker in a dynamic crime scenario. Like the previous approach, the attacker follows the path with optimal time to escape from the city. In contrast, defenders try to catch the attacker regardless of the path which the attacker takes. The defenders aim is to maximize the interdiction probability. As time plays a vital role, we choose a meta-heuristic approach to provide quality solutions in a time-efficient manner. We test the developed meta-heuristic with a case study on the IIT Kharagpur map, India. We analyze the performance of the mentioned approaches using the SUMO simulator both in the presence of traffic and without traffic. We develop a linear regression model to generate optimal path in the presence of traffic. Here traffic is generated randomly in the whole network using the SUMO simulator.
△ Less
Submitted 19 May, 2023;
originally announced May 2023.
-
Analysis of vocal breath sounds before and after administering Bronchodilator in Asthmatic patients
Authors:
Shivani Yadav,
Dipanjan Gope,
Uma Maheswari K.,
Prasanta Kumar Ghosh
Abstract:
Asthma is one of the chronic inflammatory diseases of the airways, which causes chest tightness, wheezing, breathlessness, and cough. Spirometry is an effort-dependent test used to monitor and diagnose lung conditions like Asthma. Vocal breath sound (VBS) based analysis can be an alternative to spirometry as VBS characteristics change depending on the lung condition. VBS test consumes less time, a…
▽ More
Asthma is one of the chronic inflammatory diseases of the airways, which causes chest tightness, wheezing, breathlessness, and cough. Spirometry is an effort-dependent test used to monitor and diagnose lung conditions like Asthma. Vocal breath sound (VBS) based analysis can be an alternative to spirometry as VBS characteristics change depending on the lung condition. VBS test consumes less time, and it also requires less effort, unlike spirometry. In this work, VBS characteristics are analyzed before and after administering bronchodilator in a subject-dependent manner using linear discriminant analysis (LDA). We find that features learned through LDA show a significant difference between VBS recorded before and after administering bronchodilator in all 30 subjects considered in this work, whereas the baseline features could achieve a significant difference between VBS only for 26 subjects. We also observe that all frequency ranges do not contribute equally to the discrimination between pre and post bronchodilator conditions. From experiments, we find that two frequency ranges, namely 400-500Hz and 1480-1900Hz, maximally contribute to the discrimination of all the subjects. The study presented in this paper analyzes the pre and post-bronchodilator effect on the inhalation sound recorded at the mouth in a subject-dependent manner. The findings of this work suggest that, inhalation sound recorded at mouth can be a good stimulus to discriminate pre and post-bronchodilator conditions in asthmatic subjects. Inhale sound-based pre and post-bronchodilator discrimination can be of potential use in clinical settings.
△ Less
Submitted 29 April, 2023;
originally announced May 2023.
-
Exploring exotic configurations with anomalous features using deep learning: Application of classical and quantum-classical hybrid anomaly detection
Authors:
Kumar J. B. Ghosh,
Sumit Ghosh
Abstract:
In this article we present the application of classical and quantum-classical hybrid anomaly detection schemes to explore exotic configuration with anomalous features. We consider the Anderson model as a prototype where we define two types of anomalies - a high conductance in presence of strong impurity and low conductance in presence of weak impurity - as a function of random impurity distributio…
▽ More
In this article we present the application of classical and quantum-classical hybrid anomaly detection schemes to explore exotic configuration with anomalous features. We consider the Anderson model as a prototype where we define two types of anomalies - a high conductance in presence of strong impurity and low conductance in presence of weak impurity - as a function of random impurity distribution. Such anomalous outcome constitutes an imperceptible fraction of the data set and is not a part of the training process. These exotic configurations, which can be a source of rich new physics, usually remain elusive to conventional classification or regression methods and can be tracked only with a suitable anomaly detection scheme. We also present a systematic study of the performance of the classical and the quantum-classical hybrid anomaly detection method and show that the inclusion of a quantum circuit significantly enhances the performance of anomaly detection which we quantify with suitable performance metrics. Our approach is quite generic in nature and can be used for any system that relies on a large number of parameters to find their new configurations which can hold exotic new features.
△ Less
Submitted 10 June, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
High-Efficiency Photodetector Based On CVD-Grown WS$_2$ Monolayer
Authors:
Rakesh K. Prasad,
Koushik Ghosh,
P. K. Giri,
Dai-Sik Kim,
Dilip K. Singh
Abstract:
Future generation technologies demand high efficiency photodetectors to enable sensing and switching devices for ultrafast communication and machine vision. This require direct-band gap materials with high photosensitivity, high detectivity and high quantum efficiency. Monolayered two- Dimensional (2D)-Semiconductors based photodetectors are the most promising materials for such applications, alth…
▽ More
Future generation technologies demand high efficiency photodetectors to enable sensing and switching devices for ultrafast communication and machine vision. This require direct-band gap materials with high photosensitivity, high detectivity and high quantum efficiency. Monolayered two- Dimensional (2D)-Semiconductors based photodetectors are the most promising materials for such applications, although experimental realization has been limited due to unavailability of high quality sample. In the current manuscript, we report about WS$_2$ based photodetector having sensitivity of 290 AW-1 upon 405 nm excitation and incident power density as low as 0.06 mW/cm$^2$. The fabricated device shows detectivity of 52*10^14 with external quantum efficiency of 89*10$^3$%. The observed superior photo-response parameters of CVD grown WS$_2$ based photodetector as compared to Si-detectors establishes it capability to replace the Si-photodetectors with monolayered ultrathin device having superior performance parameters.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Photo-Rechargeable Li Ion Batteries using TiS2 Cathode
Authors:
Amar Kumar,
Raheel Hammad,
Mansi Pahuja,
Raul Arenal,
Kaushik Ghosh,
Soumya Ghosh,
Tharangattu N. Narayanan
Abstract:
Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here we demonstrate a two-electrode lithium ion solar battery with multifaceted TiS2-TiO2 hybrid sheets as cathode. Choice of TiS2-TiO2 electrode ensures the formation of…
▽ More
Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here we demonstrate a two-electrode lithium ion solar battery with multifaceted TiS2-TiO2 hybrid sheets as cathode. Choice of TiS2-TiO2 electrode ensures the formation of a type II semiconductor heterostructure while the lateral heterostructure geometry ensures high mass/charge transfer and light interactions with the electrode. TiS2 has a higher lithium binding energy (1.6 eV) than TiO2 (1.03 eV), ensuring the possibilities of higher amount of Li ion insertion to TiS2 and hence the maximum recovery with the photocharging, as further confirmed by the experiments. Apart from the demonstration of solar solid-state batteries, the charging of lithium ion full cell with light indicates the formation of lithium intercalated graphite compounds, ensuring the charging of the battery without any other parasitic reactions at the electrolyte or electrode-electrolyte interfaces. Possible mechanisms proposed here for the charging and discharging processes of solar batteries, based on our experimental and theoretical results, indicate the potential of such systems in forthcoming era of renewable energies.
△ Less
Submitted 15 January, 2023;
originally announced January 2023.
-
Analytical study of ion-acoustic solitary waves in a magnetized plasma with degenerate electrons
Authors:
Moumita Indra,
Kamal Kumar Ghosh,
Saibal Ray
Abstract:
The propagation of fully nonlinear ion acoustic solitary waves (IASW) in a magneto-plasma with degenerate electrons was investigated by Abdelsalam et al. [[1] Physics Letters A 372 (2008) 4923]. Based on their work in the present work, a rigorous and general analytical study is presented. This confirms their implied assumption that (i) only hump and no cavity is possible and (ii) for humps, the al…
▽ More
The propagation of fully nonlinear ion acoustic solitary waves (IASW) in a magneto-plasma with degenerate electrons was investigated by Abdelsalam et al. [[1] Physics Letters A 372 (2008) 4923]. Based on their work in the present work, a rigorous and general analytical study is presented. This confirms their implied assumption that (i) only hump and no cavity is possible and (ii) for humps, the algebraic equation for the maximum density N obtained by them determines it uniquely (naturally assumes N > 1). Here we confirm analytically their assertion that N decreases with lx (the direction cosine of the wave vector k along the x-axis) and N increases with the increase of the Mach number (M).
△ Less
Submitted 3 January, 2023;
originally announced January 2023.
-
Molecular van der Waals fluids in cavity quantum electrodynamics
Authors:
John P. Philbin,
Tor S. Haugland,
Tushar K. Ghosh,
Enrico Ronca,
Ming Chen,
Prineha Narang,
Henrik Koch
Abstract:
Intermolecular van der Waals interactions are central to chemical and physical phenomena ranging from biomolecule binding to soft-matter phase transitions. However, there are currently very limited approaches to manipulate van der Waals interactions. In this work, we demonstrate that strong light-matter coupling can be used to tune van der Waals interactions, and, thus, control the thermodynamic p…
▽ More
Intermolecular van der Waals interactions are central to chemical and physical phenomena ranging from biomolecule binding to soft-matter phase transitions. However, there are currently very limited approaches to manipulate van der Waals interactions. In this work, we demonstrate that strong light-matter coupling can be used to tune van der Waals interactions, and, thus, control the thermodynamic properties of many-molecule systems. Our analyses reveal orientation dependent single molecule energies and interaction energies for van der Waals molecules (for example, H$_{2}$). For example, we find intermolecular interactions that depend on the distance between the molecules $R$ as $R^{-3}$ and $R^{0}$. Moreover, we employ non-perturbative \textit{ab initio} cavity quantum electrodynamics calculations to develop machine learning-based interaction potentials for molecules inside optical cavities. By simulating systems ranging from $12$ H$_2$ to $144$ H$_2$ molecules, we demonstrate that strong light-matter coupling can tune the structural and thermodynamic properties of molecular fluids. In particular, we observe varying degrees of orientational order as a consequence of cavity-modified interactions, and we explain how quantum nuclear effects, light-matter coupling strengths, number of cavity modes, molecular anisotropies, and system size all impact the extent of orientational order. These simulations and analyses demonstrate both local and collective effects induced by strong light-matter coupling and open new paths for controlling the properties of molecular clusters.
△ Less
Submitted 30 June, 2023; v1 submitted 16 September, 2022;
originally announced September 2022.
-
Reweighted Manifold Learning of Collective Variables from Enhanced Sampling Simulations
Authors:
Jakub Rydzewski,
Ming Chen,
Tushar K. Ghosh,
Omar Valsson
Abstract:
Enhanced sampling methods are indispensable in computational physics and chemistry, where atomistic simulations cannot exhaustively sample the high-dimensional configuration space of dynamical systems due to the sampling problem. A class of such enhanced sampling methods works by identifying a few slow degrees of freedom, termed collective variables (CVs), and enhancing the sampling along these CV…
▽ More
Enhanced sampling methods are indispensable in computational physics and chemistry, where atomistic simulations cannot exhaustively sample the high-dimensional configuration space of dynamical systems due to the sampling problem. A class of such enhanced sampling methods works by identifying a few slow degrees of freedom, termed collective variables (CVs), and enhancing the sampling along these CVs. Selecting CVs to analyze and drive the sampling is not trivial and often relies on physical and chemical intuition. Despite routinely circumventing this issue using manifold learning to estimate CVs directly from standard simulations, such methods cannot provide map**s to a low-dimensional manifold from enhanced sampling simulations as the geometry and density of the learned manifold are biased. Here, we address this crucial issue and provide a general reweighting framework based on anisotropic diffusion maps for manifold learning that takes into account that the learning data set is sampled from a biased probability distribution. We consider manifold learning methods based on constructing a Markov chain describing transition probabilities between high-dimensional samples. We show that our framework reverts the biasing effect yielding CVs that correctly describe the equilibrium density. This advancement enables the construction of low-dimensional CVs using manifold learning directly from data generated by enhanced sampling simulations. We call our framework reweighted manifold learning. We show that it can be used in many manifold learning techniques on data from both standard and enhanced sampling simulations.
△ Less
Submitted 3 April, 2024; v1 submitted 29 July, 2022;
originally announced July 2022.
-
Detailed investigation on x-ray emission from laser driven high-Z foils in a wide intensity range : role of conversion layer and reemission zone
Authors:
Gaurav Mishra,
Karabi Ghosh
Abstract:
Detailed radiation hydrodynamic simulations are carried out to investigate x-ray emission process in four high-Z planar targets namely, tungsten (W), gold (Au), lead (Pb) and uranium (U) irradiated by 1 ns, 351 nm flat top laser pulses. A thorough zoning analysis is performed for all laser driven high-Z foils over a wide intensity range of $10^{12}-10^{15} W/cm^{2}$ with appropriately chosen photo…
▽ More
Detailed radiation hydrodynamic simulations are carried out to investigate x-ray emission process in four high-Z planar targets namely, tungsten (W), gold (Au), lead (Pb) and uranium (U) irradiated by 1 ns, 351 nm flat top laser pulses. A thorough zoning analysis is performed for all laser driven high-Z foils over a wide intensity range of $10^{12}-10^{15} W/cm^{2}$ with appropriately chosen photon energy range and recombination parameter. The resulting variation of conversion efficiency over the full intensity range exhibits an optimum for all materials which is explained by considering the characteristic emission contributions from two different regions of laser irradiated plasma, namely, conversion layer and remission zone. A new generalized single scaling relation based upon smooth broken power law is proposed for conversion efficiency variation along with the separate determination ($η_{S}$, $η_{M}$) in soft and hard/M-band x-ray regions. It has been observed that $η_{S}$ for Pb and W always lies in between that for Au and U for intensities smaller than $\sim 3\times 10^{13} W/cm^{2}$. On further increase in intensity, $η_{S}$ is observed to be maximum for Au and U whereas it is minimum for W. Significant contribution to M-band conversion efficiencies is observed in all elements for intensities higher than $\sim 2\times 10^{13} W/cm^{2}$ with maximum and minimum values attained by W and U, respectively. The results are explained by considering the contributions from the emission coefficients of all materials in both conversion layer and reemission zone up to corresponding photon cut-off energies at different laser intensities.
△ Less
Submitted 28 July, 2022;
originally announced July 2022.
-
Classical and quantum machine learning applications in spintronics
Authors:
Kumar Ghosh,
Sumit Ghosh
Abstract:
In this article we demonstrate the applications of classical and quantum machine learning in quantum transport and spintronics. With the help of a two-terminal device with magnetic impurity we show how machine learning algorithms can predict the highly non-linear nature of conductance as well as the non-equilibrium spin response function for any random magnetic configuration. By map** this quant…
▽ More
In this article we demonstrate the applications of classical and quantum machine learning in quantum transport and spintronics. With the help of a two-terminal device with magnetic impurity we show how machine learning algorithms can predict the highly non-linear nature of conductance as well as the non-equilibrium spin response function for any random magnetic configuration. By map** this quantum mechanical problem onto a classification problem, we are able to obtain much higher accuracy beyond the linear response regime compared to the prediction obtained with conventional regression methods. We finally describe the applicability of quantum machine learning which has the capability to handle a significantly large configuration space. Our approach is applicable for solid state devices as well as for molecular systems. These outcomes are crucial in predicting the behavior of large-scale systems where a quantum mechanical calculation is computationally challenging and therefore would play a crucial role in designing nano devices.
△ Less
Submitted 27 February, 2023; v1 submitted 26 July, 2022;
originally announced July 2022.
-
Impact of liquid coolant subcooling on boiling heat transfer and dryout in heat-generating porous media
Authors:
Aranyak Chakravarty,
Koushik Ghosh,
Swarnendu Sen,
Achintya Mukhopadhyay
Abstract:
The present article discusses the impact of liquid coolant subcooling on multiphase fluid flow and boiling heat transfer in porous media with internal heat generation. Although extremely relevant and important, only limited studies are available in the open literature on the effects of coolant subcooling in heat-generating porous media and hence, this requires a detailed analysis. The analysis is…
▽ More
The present article discusses the impact of liquid coolant subcooling on multiphase fluid flow and boiling heat transfer in porous media with internal heat generation. Although extremely relevant and important, only limited studies are available in the open literature on the effects of coolant subcooling in heat-generating porous media and hence, this requires a detailed analysis. The analysis is carried out using a developed computational model of multiphase fluid flow through clear fluid and porous media considering the relevant heat transfer and mass transfer phenomena. Results suggest that the qualitative nature of boiling heat transfer from the heat-generating porous body, with subcooled coolants, remain similar to that observed with a saturated coolant. Quantitative differences are, however, observed as a result of solid-liquid convective heat transfer, and competing mechanisms of boiling and condensation heat transfer, when subcooled liquid coolant is present. It is observed that a substantially larger heating power density is required - as coolant subcooling is increased - for achieving the same temperature rise in the porous body. Dryout power density at different coolant subcooling is also observed to follow a similar trend. The thermal energy removal limit is, hence, observed to be substantially enhanced in presence of subcooled coolants. Further, the dryout region within the porous body is observed to gradually shift towards its interior as the coolant subcooling is increased.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
$δ$-PVDF Based Flexible Nanogenerator
Authors:
Varun Gupta,
Anand Babu,
Sujoy Kumar Ghosh,
Zinnia Mallick,
Hari Krishna Mishra,
Dipankar Mandal
Abstract:
Delta ($δ$) phase comprising polyvinylidene fluoride (PVDF) nanoparticles are fabricated through electrospray technique by applying 0.1 MV/m electric field at ambient temperature and pressure, which is 10$^{3}$ times lower than the typical value, required for $δ$-phase transformation. The X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns are clearly indicating the $δ$-…
▽ More
Delta ($δ$) phase comprising polyvinylidene fluoride (PVDF) nanoparticles are fabricated through electrospray technique by applying 0.1 MV/m electric field at ambient temperature and pressure, which is 10$^{3}$ times lower than the typical value, required for $δ$-phase transformation. The X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns are clearly indicating the $δ$-phase formation. The piezo- and ferro- electric response of the $δ$-PVDF nanoparticles has been demonstrated through scanning probe microscopic technique based on piezoresponse force microscopy (PFM). The vertical piezoelectric response, indicated by d$_{33}$ coefficient, is found $\sim$-11 pm/V. Kink propagation model is adopted to justify the $δ$-phase conversion in electrospray system. The electrical response from $δ$-PVDF nanoparticle comprised nanogenerator under the external impacts and acoustic signal indicates that molecular ferroelectric dipoles responsible for piezoelectric responses, are poled in-situ during nanoparticle formation, thus further electrical poling is not necessary.
△ Less
Submitted 21 August, 2021;
originally announced August 2021.
-
A new technique of linseed oil coating in bakelite RPC and the first test results
Authors:
A. Sen,
S. Chatterjee,
S. Das,
S. K. Ghosh,
S. Biswas
Abstract:
Single gap Resistive Plate Chamber (RPC) is one of the very popular gaseous detectors used in high-energy physics experiments nowadays. It is a very fast detector having low cost of fabrication. The RPCs are usually built using glass or bakelite plates having high resistivity $\sim~10^{10}-10^{11}$ $Ω$~cm. Bakelite RPCs are generally fabricated with a linseed oil coating inside to make the inner e…
▽ More
Single gap Resistive Plate Chamber (RPC) is one of the very popular gaseous detectors used in high-energy physics experiments nowadays. It is a very fast detector having low cost of fabrication. The RPCs are usually built using glass or bakelite plates having high resistivity $\sim~10^{10}-10^{11}$ $Ω$~cm. Bakelite RPCs are generally fabricated with a linseed oil coating inside to make the inner electrode surface smoother which helps to reduce the micro discharge probability. Linseed oil coating also reduces the surface UV sensitivity dramatically and effectively protect the bakelite surfaces from the Hydrofluoric Acid (HF), produced by the interaction of fluorine with the water vapour. There is a conventional way to do this linseed oil coating after making the gas gap as done in experiments $e.g.$ ALICE, CMS etc. A new technique is introduced here to do the linseed oil coating on the bakelite plate before making the gas gap. 100\% Tetrafluoroethane (C$_2$H$_2$F$_4$) gas is used to test the RPC module in the avalanche mode with cosmic rays. Conventional NIM electronics is used for this study. The efficiency and noise rate are measured. In this article, the detailed method of fabrication and the first test results are presented.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Effect of soft and hard x-rays on shock propagation, preheating and ablation characteristics in pure and doped Be ablators
Authors:
Karabi Ghosh,
Gaurav Mishra
Abstract:
In this paper, we analyze the performance of pure and doped Be ablators used for Inertial Confinement Fusion (ICF) pellets in terms of shock velocity, shock breakout temperature, preheat temperature and mass ablation rate through radiation hydrodynamic (RHD) simulations. For this study, we apply a constant radiation profile (drive temperatures varying from 120 - 200 eV) consisting of a low frequen…
▽ More
In this paper, we analyze the performance of pure and doped Be ablators used for Inertial Confinement Fusion (ICF) pellets in terms of shock velocity, shock breakout temperature, preheat temperature and mass ablation rate through radiation hydrodynamic (RHD) simulations. For this study, we apply a constant radiation profile (drive temperatures varying from 120 - 200 eV) consisting of a low frequency Planck spectrum (soft x-rays) and a high frequency Gaussian spectrum (hard x-rays, commonly termed as "M-band") on a planar foil of the ablator. The fraction of energy density in the hard x-ray spectrum ($α$) has been varied from 0 to 0.25. The predominant effect of hard x-rays is to preheat the ablator ahead of the shock front. Steady rise in preheat temperature and shock breakout temperature is observed on increasing the fraction of hard x-rays. Preheating can be mitigated by do** Be with a mid-Z element Cu as its opacity is much higher in the high frequency region. On do** Be with 1\% Cu, the shock velocities decrease slightly compared to pure Be. However, higher shock velocities are observed on increasing the fraction of M-band. We observe significant decrease in shock breakout and maximum preheat temperature in doped Be foil. Steady rise in these temperatures is observed on increasing $α$. We have proposed new scaling relations for shock velocity, shock breakout temperature, maximum preheat temperature and mass ablation rate with the radiation temperature and the fraction of M-band energy density in both pure and doped Be ablators. In terms of ablator performance, Cu doped Be ablator is found to be superior to pure Be. Though do** significantly reduces preheating, the mass ablation rates are nearly unaffected.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Interfacial anisotropic exciton-polariton manifolds in ReS$_2$
Authors:
Devarshi Chakrabarty,
Avijit Dhara,
Kritika Ghosh,
Aswini K. Pattanayak,
Shreyashi Mukherjee,
Ayan Roy Chaudhuri,
Sajal Dhara
Abstract:
Light-matter coupling in van der Waal's materials holds significant promise in realizing Bosonic condensation and superfluidity. The underlying semiconductor's crystal asymmetry, if any, can be utilized to form anisotropic half-light half-matter quasiparticles. We demonstrate generation of such highly anisotropic exciton-polaritons at the interface of a biaxial layered semiconductor, stacked on to…
▽ More
Light-matter coupling in van der Waal's materials holds significant promise in realizing Bosonic condensation and superfluidity. The underlying semiconductor's crystal asymmetry, if any, can be utilized to form anisotropic half-light half-matter quasiparticles. We demonstrate generation of such highly anisotropic exciton-polaritons at the interface of a biaxial layered semiconductor, stacked on top of a distributed Bragg reflector. The spatially confined photonic mode in this geometry couples with polarized excitons and their Rydberg states, creating a system of highly anisotropic polariton manifolds, displaying Rabi splitting of up to 68 meV. Rotation of the incident beam polarization is used to tune coupling strength and smoothly switch regimes from weak to strong coupling, while also enabling transition from one three-body coupled oscillator system to another. Light-matter coupling is further tunable by varying the number of weakly coupled optically active layers. Our work provides a versatile method of engineering devices for applications in polarization-controlled polaritonics and optoelectronics.
△ Less
Submitted 11 October, 2021; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Study of charging-up effect for a single mask triple GEM detector
Authors:
S. Chatterjee,
A. Sen,
S. Das,
S. K. Ghosh,
S. Biswas
Abstract:
With the advancement of the accelerator systems and the requirements of high luminosity particle beams to reach different physics goals, detectors with good position resolution and high rate handling capability have become essential for designing any High Energy Physics (HEP) experiments. The Gas Electron Multiplier (GEM) detectors are widely used in many HEP experiments as a tracking device becau…
▽ More
With the advancement of the accelerator systems and the requirements of high luminosity particle beams to reach different physics goals, detectors with good position resolution and high rate handling capability have become essential for designing any High Energy Physics (HEP) experiments. The Gas Electron Multiplier (GEM) detectors are widely used in many HEP experiments as a tracking device because of their good spatial resolution and rate handling capability. The presence of the dielectric medium inside the active volume of the GEM detector changes its behaviour when exposed to external radiation. This mechanism is commonly referred as the charging-up effect. In this article, the effect of the charging-up phenomenon and the initial polarisation effect of the dielectric on the gain of the chamber are reported for a single mask triple GEM chamber with Ar/CO2 gas mixture.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Long term stability study of triple GEM detector using different Argon based gas mixtures: an update
Authors:
S Chatterjee,
S Roy,
A Sen,
S Chakraborty,
S Das,
S K Ghosh,
S K Prasad,
S Raha,
S Biswas
Abstract:
The long-term stability in terms of gain and energy resolution of a prototype triple Gas Electron Multiplier (GEM) detector has been investigated with high rate X-ray irradiation. Premixed Ar/CO2 (80:20) and (90:10) gases have been used for this stability study. A strong Fe55 X-ray source is used to irradiate the chamber. The uniqueness of this work is that the same source has been used to irradia…
▽ More
The long-term stability in terms of gain and energy resolution of a prototype triple Gas Electron Multiplier (GEM) detector has been investigated with high rate X-ray irradiation. Premixed Ar/CO2 (80:20) and (90:10) gases have been used for this stability study. A strong Fe55 X-ray source is used to irradiate the chamber. The uniqueness of this work is that the same source has been used to irradiate the GEM prototype and also to monitor the spectra. This arrangement is important since it reduces the mechanical complexity of using an X-ray generator as well as the cost of the setup. A small area of the chamber is exposed continuously to the X-ray for the entire duration of the operation. The effect of temperature and pressure on the gain and energy resolution is monitored. The result of the long-term stability test for a triple GEM detector using Ar/CO2 (70:30) gas mixture has been reported earlier [1]. The results with Ar/CO2 (80:20) and (90:10) gas mixtures for the same chamber are presented in this article.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Mn Dimer can be Described Accurately with Density Functional Calculations when Self-interaction Correction is Applied
Authors:
Aleksei V. Ivanov,
Tushar K. Ghosh,
Elvar Ö. Jónsson,
Hannes Jónsson
Abstract:
Qualitatively incorrect results are obtained for the Mn dimer in density functional theory calculations using the generalized gradient approximation (GGA) and similar results are obtained from local density and meta-GGA functionals. The coupling is predicted to be ferromagnetic rather than antiferromagnetic and the bond between the atoms is predicted to be an order of magnitude too strong and abou…
▽ More
Qualitatively incorrect results are obtained for the Mn dimer in density functional theory calculations using the generalized gradient approximation (GGA) and similar results are obtained from local density and meta-GGA functionals. The coupling is predicted to be ferromagnetic rather than antiferromagnetic and the bond between the atoms is predicted to be an order of magnitude too strong and about an Ångstrøm too short. Explicit, self-interaction correction (SIC) applied to a commonly used GGA energy functional, however, provides close agreement with both experimental data and high-level, multi-reference wave function calculations. These results show that the failure is not due to strong correlation but rather the single electron self-interaction that is necessarily introduced in estimates of the classical Coulomb and exchange-correlation energy when only the total electron density is used as input. The corrected functional depends explicitly on the orbital densities and can, therefore, avoid the introduction of self-Coulomb interaction. The error arises because of over-stabilization of bonding $d$-states in the minority spin channel resulting from an overestimate of the $d$-electron self-interaction in the semi-local exchange-correlation functionals. Since the computational effort in the self-interaction corrected calculations scales with system size in the same way as for regular semi-local functional calculations, this approach provides a way to calculate properties of Mn nanoclusters as well as biomolecules and extended solids where Mn dimers and larger cluster are present, while multi-reference wave function calculations can only be applied to small systems.
△ Less
Submitted 17 May, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
Cosmic ray flux and lockdown due to COVID19 in Kolkata -- any correlation?
Authors:
A. Sen,
S. Chatterjee,
S. Roy,
R. Biswas,
S. Das,
S. K. Ghosh,
S. Biswas
Abstract:
Cosmic ray muon flux is measured by the coincidence technique using plastic scintillation detectors in the High Energy Physics detector laboratory at Bose Institute, Kolkata. Due to the COVID19 outbreak and nationwide complete lockdown, the laboratory was closed from the end of March 2020 till the end of May 2020. After lockdown, although the city is not in its normal state, we still were able to…
▽ More
Cosmic ray muon flux is measured by the coincidence technique using plastic scintillation detectors in the High Energy Physics detector laboratory at Bose Institute, Kolkata. Due to the COVID19 outbreak and nationwide complete lockdown, the laboratory was closed from the end of March 2020 till the end of May 2020. After lockdown, although the city is not in its normal state, we still were able to take data on some days. The lockdown imposed a strict restriction on the transport service other than the emergency ones and also most of the industries were shut down in and around the city. This lockdown has significant effect on the atmospheric conditions in terms of change in the concentration of air pollutants. We have measured the cosmic ray flux before and after the lockdown to observe the apparent change if any due to change in the atmospheric conditions. In this article, we report the measured cosmic ray flux at Kolkata (22.58$^{\circ}$N 88.42$^{\circ}$E and 11~m Above Sea Level) along with the major air pollutants present in the atmosphere before and after the lockdown.
△ Less
Submitted 13 October, 2020;
originally announced October 2020.
-
Constructing Solvable Models of Vector Non-linear Schrodinger Equation with Balanced Loss and Gain via Non-unitary transformation
Authors:
Pijush K Ghosh
Abstract:
We consider vector Non-linear Schrodinger Equation(NLSE) with balanced loss-gain(BLG), linear coupling(LC) and a general form of cubic nonlinearity. We use a non-unitary transformation to show that the system can be exactly mapped to the same equation without the BLG and LC, and with a modified time-modulated nonlinear interaction. The nonlinear term remains invariant, while BLG and LC are removed…
▽ More
We consider vector Non-linear Schrodinger Equation(NLSE) with balanced loss-gain(BLG), linear coupling(LC) and a general form of cubic nonlinearity. We use a non-unitary transformation to show that the system can be exactly mapped to the same equation without the BLG and LC, and with a modified time-modulated nonlinear interaction. The nonlinear term remains invariant, while BLG and LC are removed completely, for the special case of a pseudo-unitary transformation. The map** is generic and may be used to construct exactly solvable autonomous as well as non-autonomous vector NLSE with BLG. We present an exactly solvable two-component vector NLSE with BLG which exhibits power-oscillation. An example of a vector NLSE with BLG and arbitrary even number of components is also presented.
△ Less
Submitted 8 April, 2021; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Preparation of Isotopically enriched $^{112,116,120,124}$Sn targets at VECC
Authors:
Ratnesh Pandey,
S. Kundu,
K. Banerjee,
C. Bhattacharya,
T. K. Rana,
G. Mukherjee,
S. Manna,
J. K. Sahoo,
H. Pai,
T. K. Ghosh,
Pratap Roy,
A. Sen,
R. S. M. Saha,
J. K. Meena,
A. Saha,
D. Pandit,
A. Datta
Abstract:
Resistive heating and mechanical rolling methods have been employed to prepare isotopically enriched thin target foils of 116Sn (~380 μg/cm2), 124Sn(~400 μg/cm2) and thicker foils of 112Sn (1.7 mg/cm2),120Sn (1.6 mg/cm2),respectively. Preparation of enriched targets with small amount of material, selection of releasing agent for thin targets and separation of deposited material insolvent were amon…
▽ More
Resistive heating and mechanical rolling methods have been employed to prepare isotopically enriched thin target foils of 116Sn (~380 μg/cm2), 124Sn(~400 μg/cm2) and thicker foils of 112Sn (1.7 mg/cm2),120Sn (1.6 mg/cm2),respectively. Preparation of enriched targets with small amount of material, selection of releasing agent for thin targets and separation of deposited material insolvent were among the several challenges while fabrication of the thin targets. Uniformity of the targets has been measured using 241Am α-source. NaCl has been used as releasing agent in preparation of the thin targets. These targets have been successfully used in nuclear physics experiments at VECC.
△ Less
Submitted 11 October, 2021; v1 submitted 18 August, 2020;
originally announced August 2020.
-
A Study on The Effectiveness of Lock-down Measures to Control The Spread of COVID-19
Authors:
Subhas Kumar Ghosh,
Sachchit Ghosh,
Sai Shanmukha Narumanchi
Abstract:
The ongoing pandemic of coronavirus disease 2019-2020 (COVID-19) is caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). This pathogenic virus is able to spread asymptotically during its incubation stage through a vulnerable population. Given the state of healthcare, policymakers were urged to contain the spread of infection, minimize stress on the health systems and ensure publ…
▽ More
The ongoing pandemic of coronavirus disease 2019-2020 (COVID-19) is caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). This pathogenic virus is able to spread asymptotically during its incubation stage through a vulnerable population. Given the state of healthcare, policymakers were urged to contain the spread of infection, minimize stress on the health systems and ensure public safety. Most effective tool that was at their disposal was to close non-essential business and issue a stay home order. In this paper we consider techniques to measure the effectiveness of stringency measures adopted by governments across the world. Analyzing effectiveness of control measures like lock-down allows us to understand whether the decisions made were optimal and resulted in a reduction of burden on the healthcare system. In specific we consider using a synthetic control to construct alternative scenarios and understand what would have been the effect on health if less stringent measures were adopted. We present analysis for The State of New York, United States, Italy and The Indian capital city Delhi and show how lock-down measures has helped and what the counterfactual scenarios would have been in comparison to the current state of affairs. We show that in The State of New York the number of deaths could have been 6 times higher, and in Italy, the number of deaths could have been 3 times higher by 26th of June, 2020.
△ Less
Submitted 8 August, 2020;
originally announced August 2020.
-
Stability study and time resolution measurement of Straw Tube detectors
Authors:
S. Roy,
S. Jaiswal,
S. Chatterjee,
A. Sen,
S. Das,
S. K. Ghosh,
S. Raha,
V. M. Lysan,
G. D. Kekelidze,
V. V. Myalkovsky,
S. Biswas
Abstract:
Straw tube detectors are single wire proportional counters that are widely used as a tracking device. We have carried out R$\&$D with a straw tube detector prototype. The motivation of this work is to study the stability of the performance in terms of gain and energy resolution of the straw tube detectors under high rate radiation. Two different methods are incorporated to perform this study. The…
▽ More
Straw tube detectors are single wire proportional counters that are widely used as a tracking device. We have carried out R$\&$D with a straw tube detector prototype. The motivation of this work is to study the stability of the performance in terms of gain and energy resolution of the straw tube detectors under high rate radiation. Two different methods are incorporated to perform this study. The gain and energy resolution of the detector are studied along with its variation with ambient temperature and pressure. X-ray from a radioactive source is used to irradiate the detector and the same source is also used to monitor the energy spectra simultaneously for calculation of gain. Variation of the gain and energy resolution of the straw tube detector under X-ray irradiation in Ar/CO$_2$ gas mixture is discussed in this article. We have also estimated the time resolution of the straw tube detectors that can be best achieved with cosmic rays as trigger for the same gas mixture. The details of the measurement process and the experimental results are presented in this article.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Enhanced motility in a binary mixture of active nano/microswimmers
Authors:
Debajyoti Debnath,
Pulak K. Ghosh,
Vyacheslav R. Misko,
Yunyun Li,
Fabio Marchesoni,
Franco Nori
Abstract:
It is often desirable to enhance the motility of active nano- or microscale swimmers such as, e.g., self-propelled Janus particles as agents of chemical reactions or weak sperm cells for better chances of successful fertilization. Here we tackle this problem based on the idea that motility can be transferred from a more active guest species to a less active host species. We performed numerical sim…
▽ More
It is often desirable to enhance the motility of active nano- or microscale swimmers such as, e.g., self-propelled Janus particles as agents of chemical reactions or weak sperm cells for better chances of successful fertilization. Here we tackle this problem based on the idea that motility can be transferred from a more active guest species to a less active host species. We performed numerical simulations of motility transfer in two typical cases, namely for interacting particles with weak inertia effect, by analyzing their velocity distributions, and for interacting overdamped particles, by studying their effusion rate. In both cases we detected motility transfer with a motility enhancement of the host species of up to a factor of four. This technique of motility enhancement can find applications in chemistry, biology and medicine.
△ Less
Submitted 24 April, 2020;
originally announced April 2020.
-
Convolution based hybrid image processing technique for microscopic images of etch-pits in Nuclear Track Detectors
Authors:
Kanik Palodhi,
Joydeep Chatterjee,
Rupamoy Bhattacharyya,
S. Dey,
Sanjay K. Ghosh,
Atanu Maulik,
Sibaji Raha
Abstract:
A novel image processing technique based on convolution is developed for analyzing the etch-pit images in Nuclear Track Detectors (NTDs). The outcomes of the application of the proposed method on the different types of NTDs (e.g., CR-39, PET) containing etch-pit openings of different sizes and shapes (circular and elliptical) is presented. Promising results have been obtained for both identifying…
▽ More
A novel image processing technique based on convolution is developed for analyzing the etch-pit images in Nuclear Track Detectors (NTDs). The outcomes of the application of the proposed method on the different types of NTDs (e.g., CR-39, PET) containing etch-pit openings of different sizes and shapes (circular and elliptical) is presented. Promising results have been obtained for both identifying and counting the etch-pits in NTDs.
△ Less
Submitted 17 November, 2019; v1 submitted 26 August, 2019;
originally announced August 2019.
-
Rollable Magnetoelectric Energy Harvester as Wireless IoT Sensor
Authors:
Sujoy Kumar Ghosh,
Krittish Roy,
Hari Krishna Mishra,
Manas Ranjan Sahoo,
Biswajit Mahanty,
Prakash Nath Vishwakarma,
Dipankar Mandal
Abstract:
Perhaps the most abundant form of waste energy in our surrounding is the parasitic magnetic noise arising from electrical power transmission system. In this work, a flexible and rollable magneto-mechano-electric nanogenerator (MMENG) based wireless IoT sensor has been demonstrated in order to capture and utilize the magnetic noise. Free standing magnetoelectric (ME) composites are fabricated by co…
▽ More
Perhaps the most abundant form of waste energy in our surrounding is the parasitic magnetic noise arising from electrical power transmission system. In this work, a flexible and rollable magneto-mechano-electric nanogenerator (MMENG) based wireless IoT sensor has been demonstrated in order to capture and utilize the magnetic noise. Free standing magnetoelectric (ME) composites are fabricated by combining magnetostrictive nickel ferrite nanoparticles and piezoelectric polyvinylidene-co-trifluoroethylene polymer. The magnetoelectric 0-3 type nanocomposites possess maximum ME co-efficient of 11.43 mV/cm-Oe. Even, without magnetic bias field 99 % of the maximum ME co-efficient value is observed due to self-bias effect. As a result, the MMENG generates sufficient peak-to-peak open circuit voltage, output power density and successfully operates commercial capacitor under the weak and low frequency stray magnetic field arising from the power cable of home appliances such as, electric kettle. Finally, the harvested electrical signal has been wirelessly transmitted to a smart phone in order to demonstrate the possibility of position monitoring system construction. This cost effective and easy to integrate approach with tailored size and shape of device configuration is expected to be explored in next-generation self-powered IoT sensors including implantable biomedical devices and human health monitoring sensory systems.
△ Less
Submitted 12 August, 2019;
originally announced August 2019.
-
DFT-FE -- A massively parallel adaptive finite-element code for large-scale density functional theory calculations
Authors:
Phani Motamarri,
Sambit Das,
Shiva Rudraraju,
Krishnendu Ghosh,
Denis Davydov,
Vikram Gavini
Abstract:
We present an accurate, efficient and massively parallel finite-element code, DFT-FE, for large-scale ab-initio calculations (reaching $\sim 100,000$ electrons) using Kohn-Sham density functional theory (DFT). DFT-FE is based on a local real-space variational formulation of the Kohn-Sham DFT energy functional that is discretized using a higher-order adaptive spectral finite-element (FE) basis, and…
▽ More
We present an accurate, efficient and massively parallel finite-element code, DFT-FE, for large-scale ab-initio calculations (reaching $\sim 100,000$ electrons) using Kohn-Sham density functional theory (DFT). DFT-FE is based on a local real-space variational formulation of the Kohn-Sham DFT energy functional that is discretized using a higher-order adaptive spectral finite-element (FE) basis, and treats pseudopotential and all-electron calculations in the same framework, while accommodating non-periodic, semi-periodic and periodic boundary conditions. We discuss the main aspects of the code, which include, the various strategies of adaptive FE basis generation, and the different approaches employed in the numerical implementation of the solution of the discrete Kohn-Sham problem that are focused on significantly reducing the floating point operations, communication costs and latency. We demonstrate the accuracy of DFT-FE by comparing the energies, ionic forces and periodic cell stresses on a wide range of problems with popularly used DFT codes. Further, we demonstrate that DFT-FE significantly outperforms widely used plane-wave codes---both in CPU-times and wall-times, and on both non-periodic and periodic systems---at systems sizes beyond a few thousand electrons, with over $5-10$ fold speedups in systems with more than 10,000 electrons. The benchmark studies also highlight the excellent parallel scalability of DFT-FE, with strong scaling demonstrated on up to 192,000 MPI tasks.
△ Less
Submitted 4 April, 2019; v1 submitted 26 March, 2019;
originally announced March 2019.
-
Interdigitated flexible supercapacitor using activated carbon synthesized from biomass for wearable energy storage
Authors:
Ankit Singh,
Kaushik Ghosh,
Sushil Kumar,
Ashwini K. Agarwal,
Manjeet Jassal,
Pranab Goswami,
Harsh Chaturvedi
Abstract:
We have developed a flexible, interdigitated supercapacitor with high energy storing capacity for wearable, flexible electronic application. Locally obtained low cost biomass (banana peel) was impregnated with KOH under high temperature under an inert atmosphere to synthesize activated carbon with significant Brunauer Emmett Teller surface area of 62.03m2/g. The supercapacitor was fabricated by sc…
▽ More
We have developed a flexible, interdigitated supercapacitor with high energy storing capacity for wearable, flexible electronic application. Locally obtained low cost biomass (banana peel) was impregnated with KOH under high temperature under an inert atmosphere to synthesize activated carbon with significant Brunauer Emmett Teller surface area of 62.03m2/g. The supercapacitor was fabricated by screen printing interdigitated current collector of conducting silver ink on a thin flexible PET substrate and subsequent deposition of activated carbon and drop casting of gel electrolyte. Fabricated supercapacitor exhibits high capacitance of 33.18 mF/cm2 at 1mV/s scan rate and 20.12 mF/cm2 at a discharge current of 1mA and high energy density of 5.87 micro Wh/cm2. The developed flexible supercapacitor retains its energy storing capacity (90%) over several cycles of mechanical bending and repetitive electronic cycling tests (5000 cycles). Locally available biomass based activated carbon and low cost screen printing technique can be used for large scale fabrication of supercapacitor. The flexible supercapacitor demonstrates high energy storing capacity and mechanical durability through multiple bending and charging and discharging through LED. Therefore, it can be used for further develo** integrated wearable and printed electronic devices.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
All-electron density functional calculations for electron and nuclear spin interactions in molecules and solids
Authors:
Krishnendu Ghosh,
He Ma,
Vikram Gavini,
Giulia Galli
Abstract:
The interaction between electronic and nuclear spins in the presence of external magnetic fields can be described by a spin Hamiltonian, with parameters obtained from first principles, electronic structure calculations. We describe an approach to compute these parameters, applicable to both molecules and solids, which is based on Density Functional Theory (DFT) and real-space, all-electron calcula…
▽ More
The interaction between electronic and nuclear spins in the presence of external magnetic fields can be described by a spin Hamiltonian, with parameters obtained from first principles, electronic structure calculations. We describe an approach to compute these parameters, applicable to both molecules and solids, which is based on Density Functional Theory (DFT) and real-space, all-electron calculations using finite elements (FE). We report results for hyperfine tensors, zero field splitting tensors (spin-spin component) and nuclear quadrupole tensors of a series of molecules and of the nitrogen-vacancy center in diamond. We compare our results with those of calculations using Gaussian orbitals and plane-wave basis sets, and we discuss their numerical accuracy. We show that calculations based on FE can be systematically converged with respect to the basis set, thus allowing one to establish reference values for the spin Hamiltonian parameters, at a given level of DFT.
△ Less
Submitted 17 March, 2019; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Chemical diversity in molecular orbital energy predictions with kernel ridge regression
Authors:
Annika Stuke,
Milica Todorović,
Matthias Rupp,
Christian Kunkel,
Kunal Ghosh,
Lauri Himanen,
Patrick Rinke
Abstract:
Instant machine learning predictions of molecular properties are desirable for materials design, but the predictive power of the methodology is mainly tested on well-known benchmark datasets. Here, we investigate the performance of machine learning with kernel ridge regression (KRR) for the prediction of molecular orbital energies on three large datasets: the standard QM9 small organic molecules s…
▽ More
Instant machine learning predictions of molecular properties are desirable for materials design, but the predictive power of the methodology is mainly tested on well-known benchmark datasets. Here, we investigate the performance of machine learning with kernel ridge regression (KRR) for the prediction of molecular orbital energies on three large datasets: the standard QM9 small organic molecules set, amino acid and dipeptide conformers, and organic crystal-forming molecules extracted from the Cambridge Structural Database. We focus on prediction of highest occupied molecular orbital (HOMO) energies, computed at density-functional level of theory. Two different representations that encode molecular structure are compared: the Coulomb matrix (CM) and the many-body tensor representation (MBTR). We find that KRR performance depends significantly on the chemistry of the underlying dataset and that the MBTR is superior to the CM, predicting HOMO energies with a mean absolute error as low as 0.09 eV. To demonstrate the power of our machine learning method, we apply our model to structures of 10k previously unseen molecules. We gain instant energy predictions that allow us to identify interesting molecules for future applications.
△ Less
Submitted 25 March, 2019; v1 submitted 20 December, 2018;
originally announced December 2018.
-
A new type of RPC with very low resistive material
Authors:
S. Chakraborty,
S. Chatterjee,
S. Roy,
A. Roy,
S. Biswas,
S. Das,
S. K. Ghosh,
S. K. Prasad,
S. Raha
Abstract:
There are several working groups that are currently working on high rate RPC's using different materials such as Si-based Ceramics, Low-resistive Glass, low-resistive bakelite etc. A new type of single gap RPC has been fabricated using very low-resistive carbon-loaded PTFE material to compete with all these other groups and materials. In terms of bulk resistivity, this material is the lowest and s…
▽ More
There are several working groups that are currently working on high rate RPC's using different materials such as Si-based Ceramics, Low-resistive Glass, low-resistive bakelite etc. A new type of single gap RPC has been fabricated using very low-resistive carbon-loaded PTFE material to compete with all these other groups and materials. In terms of bulk resistivity, this material is the lowest and should in principle be able to work at the highest rates, provided the material can withstand working bias and radiation. The efficiency and noise rate of the RPC are measured with cosmic rays. The detail method of fabrication and first experimental results are presented.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Study of uniformity of characteristics over the surface for triple GEM detector
Authors:
S. Chatterjee,
S. Chakraborty,
S. Roy,
S. Biswas,
S. Das,
S. K. Ghosh,
S. K. Prasad,
S. Raha
Abstract:
Study of the uniformity of gain, energy resolution and count rate over active area of a triple GEM detector has been performed using a strong Fe55 X-ray source with premixed gas of Argon and CO2 in 70/30 ratio and conventional NIM electronics. The detail method of measurement and experimental results are presented in this article.
Study of the uniformity of gain, energy resolution and count rate over active area of a triple GEM detector has been performed using a strong Fe55 X-ray source with premixed gas of Argon and CO2 in 70/30 ratio and conventional NIM electronics. The detail method of measurement and experimental results are presented in this article.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Plastic scintillator detector array for detection of cosmic ray air shower
Authors:
S. Roy,
S. Chakraborty,
S. Chatterjee,
S. Biswas,
S. Das,
S. K. Ghosh,
A. Maulik,
S. Raha
Abstract:
An air shower array of seven plastic scintillation detectors has been built and commissioned at an altitude of 2200 meter above sea level in the Eastern Himalayas (Darjeeling). Continuous measurement of shower rate using this array is going on since the end of January, 2018. The method of measurement and experimental results are presented in this article.
An air shower array of seven plastic scintillation detectors has been built and commissioned at an altitude of 2200 meter above sea level in the Eastern Himalayas (Darjeeling). Continuous measurement of shower rate using this array is going on since the end of January, 2018. The method of measurement and experimental results are presented in this article.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade
Authors:
M. M. Aggarwal,
Z. Ahammed,
S. Aiola,
J. Alme,
T. Alt,
W. Amend,
A. Andronic,
V. Anguelov,
H. Appelshäuser,
M. Arslandok,
R. Averbeck,
M. Ball,
G. G. Barnaföldi,
E. Bartsch,
R. Bellwied,
G. Bencedi,
M. Berger,
N. Bialas,
P. Bialas,
L. Bianchi,
S. Biswas,
L. Boldizsár,
L. Bratrud,
P. Braun-Munzinger,
M. Bregant
, et al. (155 additional authors not shown)
Abstract:
A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivit…
▽ More
A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced. The upgrade relies on continuously operated readout detectors employing Gas Electron Multiplier technology to retain the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The performance of the prototype was evaluated in a test beam campaign at the CERN PS. The d$E$/d$x$ resolution complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data.
△ Less
Submitted 17 June, 2018; v1 submitted 8 May, 2018;
originally announced May 2018.
-
Study of stability of gain and energy resolution for GEM detector in high rate operation
Authors:
S. Roy,
S. Rudra,
S. Shaw,
R. P. Adak,
S. Biswas,
S. Das,
S. K. Ghosh,
S. K. Prasad,
S. Raha
Abstract:
Study of the stability of gain and energy resolution for a triple GEM detector has been performed under continuous radiation of X-ray with high rate, using premixed gas of Argon and CO$_2$ in 70/30 ratio and conventional NIM electronics. A strong Fe$^{55}$ X-ray source is used for this study. The novelty of this study is that for the stability test same source is used to irradiate the GEM chamber…
▽ More
Study of the stability of gain and energy resolution for a triple GEM detector has been performed under continuous radiation of X-ray with high rate, using premixed gas of Argon and CO$_2$ in 70/30 ratio and conventional NIM electronics. A strong Fe$^{55}$ X-ray source is used for this study. The novelty of this study is that for the stability test same source is used to irradiate the GEM chamber and to monitor the spectrum. The radiation is not collimated to a point but exposed to a larger area. Effect of temperature and pressure on these parameters are also studied. The detail method of measurement and the first test results are presented in this article.
△ Less
Submitted 9 April, 2018;
originally announced April 2018.
-
Detectors for Nuclear Physics
Authors:
T. K. Ghosh
Abstract:
Progress in nuclear physics is driven by the experimental observation that requires state of the art detectors to measure various kinematic properties, such as energy, momentum, position etc. of the particles produced in a nuclear reaction. Advances in detector technology has enabled nuclear physicists to measure these quantities with better precision, and the reduced cost of the detection system…
▽ More
Progress in nuclear physics is driven by the experimental observation that requires state of the art detectors to measure various kinematic properties, such as energy, momentum, position etc. of the particles produced in a nuclear reaction. Advances in detector technology has enabled nuclear physicists to measure these quantities with better precision, and the reduced cost of the detection system has helped to have larger detection systems (array of detectors) to measure the rare processes with greater sensitivity. Several detection systems have been designed, developed and built in India over last few decades and are being used by the physicists. In this article, I will focus on such developments of detection systems at Variable Energy Cyclotron Centre (VECC), Kolkata.
△ Less
Submitted 3 January, 2018;
originally announced January 2018.
-
A comparative study of alternative methods to determine the response of poly-ethylene terephthalate nuclear track detector
Authors:
R. Bhattacharyya,
S. Dey,
Sanjay K. Ghosh,
Akhil Jhingan,
A. Maulik,
L. Patrizii,
Sibaji Raha,
D. Syam,
V. Togo
Abstract:
Two widely used methods of determining the etch-rate ratio in poly-ethylene terephthalate (PET) nuclear track detector are compared. Their application in different regimes of ion$\textquoteright$s energy loss is investigated. A new calibration curve for PET is also presented.
Two widely used methods of determining the etch-rate ratio in poly-ethylene terephthalate (PET) nuclear track detector are compared. Their application in different regimes of ion$\textquoteright$s energy loss is investigated. A new calibration curve for PET is also presented.
△ Less
Submitted 20 April, 2018; v1 submitted 18 November, 2017;
originally announced November 2017.
-
Studies of the effect of rate on gain for straw tube detector
Authors:
S. Roy,
N. Nandi,
R. P. Adak,
S. Biswas,
S. Das,
S. K. Ghosh,
S. K. Prasad,
S. Raha
Abstract:
Basic R & D have been carried out with one small straw tube detector prototype with premixed gas of Ar+CO2 in 70:30 and 90:10 ratio. The gain and the energy resolution are measured with Fe55 X-ray source. Effect of temperature and pressure on these parameters are measured. The variation of gain and energy resolution with rate per unit length are also measured. The details of the test set-up, the m…
▽ More
Basic R & D have been carried out with one small straw tube detector prototype with premixed gas of Ar+CO2 in 70:30 and 90:10 ratio. The gain and the energy resolution are measured with Fe55 X-ray source. Effect of temperature and pressure on these parameters are measured. The variation of gain and energy resolution with rate per unit length are also measured. The details of the test set-up, the method of measurement and the test results are presented in this paper.
△ Less
Submitted 23 September, 2017;
originally announced September 2017.
-
On Gauge Theories and Covariant Derivatives in Metric Spaces
Authors:
Kaushik Ghosh
Abstract:
In this manuscript, we will discuss the construction of covariant derivative operator in quantum gravity. We will find it is more perceptive to use affine connections more general than metric compatible connections in quantum gravity. We will demonstrate this using the canonical quantization procedure. This is valid irrespective of the presence and nature of sources. The Palatini and metric-affine…
▽ More
In this manuscript, we will discuss the construction of covariant derivative operator in quantum gravity. We will find it is more perceptive to use affine connections more general than metric compatible connections in quantum gravity. We will demonstrate this using the canonical quantization procedure. This is valid irrespective of the presence and nature of sources. The Palatini and metric-affine formalisms, where metric and affine connections are the independent variables, are not sufficient to construct a source-free theory of gravity with affine connections more general than the metric compatible Levi-Civita connections. This is also valid for many minimally coupled interacting theories where sources only couple with metric by using the Levi-Civita connections exclusively. We will discuss potential formalism of affine connections to introduce affine connections more general than metric compatible connections in gravity. We will also discuss possible extensions of the actions for this purpose. General affine connections introduce new fields in gravity besides metric. In this article, we will consider a simple potential formalism with symmetric Ricci tensor. Corresponding affine connections introduce two massless scalar fields. One of these fields contributes a stress-tensor with opposite sign to the sources of Einstein's equation when we state the equation using the Levi-Civita connections. This means we have a massless scalar field with negative stress-tensor in the familiar Einstein equation. These scalar fields can be useful to explain dark energy and inflation. These fields bring us beyond strict local Minkowski geometries.
△ Less
Submitted 29 April, 2019; v1 submitted 7 February, 2017;
originally announced February 2017.
-
Nonlocality of relaxation rates in disordered landscapes
Authors:
Yunyun Li,
Debajyoti Debnath,
Pulak K. Ghosh,
Fabio Marchesoni
Abstract:
We investigate both analytically and by numerical simulation the relaxation of an overdamped Brownian particle in a 1D multiwell potential. We show that the mean relaxation time from an injection point inside the well down to its bottom is dominated by statistically rare trajectories that sample the potential profile outside the well. As a consequence, also the hop** time between two degenerate…
▽ More
We investigate both analytically and by numerical simulation the relaxation of an overdamped Brownian particle in a 1D multiwell potential. We show that the mean relaxation time from an injection point inside the well down to its bottom is dominated by statistically rare trajectories that sample the potential profile outside the well. As a consequence, also the hop** time between two degenerate wells can depend on the detailed multiwell structure of the entire potential. The nonlocal nature of the transitions between two states of a disordered landscape is important for the correct interpretation of the relaxation rates in complex chemical-physical systems, measured either through numerical simulations or experimental techniques.
△ Less
Submitted 8 February, 2017;
originally announced February 2017.