Showing 1–18 of 18 results for author: Gershon, T

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Performance of a prototype TORCH time-of-flight detector

Authors: Srishti Bhasin, Thomas Blake, Nicholas Brook, Maria Flavia Cicala, Thomas Conneely, David Cussans, Maarten van Dijk, Roger Forty, Christoph Frei, Emmy Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom Hadavizadeh, Thomas Hancock, Thomas Jones, Neville Harnew, Michal Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker, Jennifer Clare Smallwood

Abstract: TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custo… ▽ More TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custom-designed Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMTs) which measure their positions and arrival times. The target time resolution per photon is 70 ps which, for 30 detected photons per charged particle, results in a 10-15 ps time-of-flight resolution. A 1.25 m length TORCH prototype module employing two MCP-PMTs has been developed, and tested at the CERN PS using a charged hadron beam of 8 GeV/c momentum. The construction of the module, the properties of the MCP-PMTs and the readout electronics are described. Measurements of the collected photon yields and single-photon time resolutions have been performed as a function of particle entry points on the plate and compared to expectations. These studies show that the performance of the TORCH prototype approaches the design goals for the full-scale detector. △ Less

Submitted 8 March, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 18 pages, 16 figures, to be published in Nucl. Instrum. Methods A. During review, clarity added to description throughout; updated figures 15 and 16; revised argument in section 6.3

Picosecond timing of charged particles using the TORCH detector

Authors: Maria Flavia Cicala, Srishti Bhasin, Thomas Blake, Nick H. Brook, Thomas Conneely, David Cussans, Maarten W. U. van Dijk, Roger Forty, Christoph Frei, Emmy P. M. Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Thomas Hadavizadeh, Thomas Henry Hancock, Neville Harnew, Thomas Jones, Michal Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker, Jennifer Clare Smallwood

Abstract: TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The posit… ▽ More TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The position and arrival times of the photons are used to infer the particles' time of entry in the radiator, to identify hadrons based on their ToF. The MCP-PMTs were developed with an industrial partner to satisfy the stringent requirements of the TORCH detector. The requirements include a finely segmented anode, excellent time resolution, and a long lifetime. Over an approximately 10m flight distance, the difference in ToF between a kaon and a pion with 10GeV$/c$ momentum is 35ps, leading to a 10-15ps per track timing resolution requirement. On average 30 photons per hadron are detected, which translates to a single-photon time resolution of 70ps. The TORCH research and development program aims to demonstrate the validity of the detector concept through laboratory and beam tests, results from which are presented. A timing resolution of 70-100ps was reached in beam tests, approaching the TORCH design goal. Laboratory timing tests consist of operating the MCP-PMTs coupled to the TORCH readout electronics. A time resolution of about 50ps was measured, meeting the TORCH target timing resolution. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: Vienna Instrumentation Conference 2022 proceedings. 13 pages,5 figures, 1 table

Test-beam demonstration of a TORCH prototype module

Authors: J. C. Smallwood, S. Bhasin, T. Blake, N. H. Brook, M. F. Cicala, T. Conneely, D. Cussans, M. W. U. van Dijk, R. Forty, C. Frei, E. P. M. Gabriel, R. Gao, T. Gershon, T. Gys, T. Hadavizadeh, T. H. Hancock, N. Harnew, M. Kreps, J. Milnes, D. Piedigrossi, J. Rademacker

Abstract: The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positi… ▽ More The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positions. A half-scale ($660\times1250\times10$ mm$^3$) TORCH demonstrator module has been tested in an 8 GeV/c mixed proton-pion beam at CERN. Customised square MCP-PMTs of active area $53\times53$ mm$^2$ and granularity $64\times64$ pixels have been employed, which have been developed in collaboration with an industrial partner. The single-photon timing performance and photon yields have been measured as a function of beam position in the radiator, giving measurements which are consistent with expectations. The expected performance of TORCH for high luminosity running of the LHCb Upgrade II has been simulated. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 6 pages, 6 figures, Proceedings of the TIPP2021 Conference, TRIUMF, 24 - 28 May 2021, submitted to IoP Conference Series

Origins of the method to determine the CKM angle $γ$ using $B^{\pm} \to D K^{\pm}$, $D \to K_{\rm S}^0π^+π^-$ decays

Authors: A. Ceccucci, T. Gershon, M. Kenzie, Z. Ligeti, Y. Sakai, K. Trabelsi

Abstract: The angle $γ$ of the Cabibbo--Kobayashi--Maskawa unitarity triangle is a benchmark parameter of the Standard Model of particle physics. A method to determine $γ$ from $B^{\pm} \to D K^{\pm}$ with subsequent $D \to K_{\rm S}^0π^+π^-$ or similar multibody decays has been proven to provide good sensitivity. We review the first discussions on the use of this technique, and its impact subsequently. We… ▽ More The angle $γ$ of the Cabibbo--Kobayashi--Maskawa unitarity triangle is a benchmark parameter of the Standard Model of particle physics. A method to determine $γ$ from $B^{\pm} \to D K^{\pm}$ with subsequent $D \to K_{\rm S}^0π^+π^-$ or similar multibody decays has been proven to provide good sensitivity. We review the first discussions on the use of this technique, and its impact subsequently. We propose that this approach should be referred to as the BPGGSZ method. △ Less

Submitted 22 June, 2020; originally announced June 2020.

The Upgrade I of LHCb VELO -- towards an intelligent monitoring platform

Authors: P. Kopciewicz, T. Szumlak, M. Majewski, K. Akiba, O. Augusto, J. Back, D. S. Bobulska, G. Bogdanova, S. Borghi, T. Bowcock, J. Buytaert, E. Lemos Cid, V. Coco, P. Collins, E. Dall'Occo, K. de Bruyn, S. de Capua, F. Dettori, K. Dreimanis, D. Dutta, L. Eklund, T. Evans, M. Ferro-Luzzi W. Funk, L. Meyer Garcia, O. Boente García , et al. (41 additional authors not shown)

Abstract: The Large Hadron Collider beauty (LHCb) detector is designed to detect decays of b- and c- hadrons for the study of CP violation and rare decays. At the end of the LHC Run 2, many of the LHCb measurements remained statistically dominated. In order to increase the trigger yield for purely hadronic channels, the hardware trigger will be removed, and the detector will be read out at 40 MHz. This, in… ▽ More The Large Hadron Collider beauty (LHCb) detector is designed to detect decays of b- and c- hadrons for the study of CP violation and rare decays. At the end of the LHC Run 2, many of the LHCb measurements remained statistically dominated. In order to increase the trigger yield for purely hadronic channels, the hardware trigger will be removed, and the detector will be read out at 40 MHz. This, in combination with the five-fold increase in luminosity, requires radical changes to LHCb's electronics, and, in some cases, the replacement of entire sub-detectors with state-of-the-art detector technologies. The Vertex Locator (VELO) surrounding the interaction region is used to reconstruct the collision points (primary vertices) and decay vertices of long-lived particles (secondary vertices). The upgraded VELO will be composed of 52 modules placed along the beam axis divided into two retractable halves. The modules will each be equipped with 4 silicon hybrid pixel tiles, each read out by 3 VeloPix ASICs. The total output data rate anticipated for the whole detector will be around 1.6 Tbit/s. The highest occupancy ASICs will have pixel hit rates of approximately 900 Mhit/s, with the corresponding output data rate of 15 Gbit/s. The LHCb upgrade detector will be the first detector to read out at the full LHC rate of 40 MHz. The VELO upgrade will utilize the latest detector technologies to read out at this rate while maintaining the required radiation-hard profile and minimizing the detector material. △ Less

Submitted 22 July, 2022; v1 submitted 16 June, 2020; originally announced June 2020.

Journal ref: Journal of Instrumentation (JINST), Volume 15, June 2020

Status of the TORCH Project

Authors: N. Harnew, S. Bhasin, T. Blake, N. H. Brook, M. F. Cicala, T. Conneely, D. Cussans, M. W. U. vanDijk, R. Forty, C. Frei, E. P. M. Gabriel, R. Gao, T. Gershon, T. Gys, T. Hadavizadeh, T. H. Hancock, M. Kreps, J. Milnes, D. Piedigrossi, J. Rademacker

Abstract: The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-… ▽ More The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-Channel Plate Photomultiplier Tube (MCP-PMT) photon detectors of 53 x 53 mm^2 active area with a 64 x 64 granularity have been developed with industrial partners. Test-beam studies using both a small-scale TORCH demonstrator and a half-length TORCH module are presented. The desired timing resolution of 70 ps per single photon is close to being achieved. △ Less

Submitted 6 March, 2020; originally announced March 2020.

Comments: 10 pages, 9 figures. Proceedings of the DIRC2019 Workshop, Castle Rauischholzhausen 11-13 Sept 2019. arXiv admin note: substantial text overlap with arXiv:1810.06658

Test-beam studies of a small-scale TORCH time-of-flight demonstrator

Authors: S. Bhasin, T. Blake, N. Brook, T. Conneely, D. Cussans, R. Forty, C. Frei, E. P. M. Gabriel, R. Gao, T. Gershon, T. Gys, T. Hadavizadeh, T. H. Hancock, N. Harnew, M. Kreps, J. Milnes, D. Piedigrossi, J. Rademacker, M. van Dijk

Abstract: TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Mi… ▽ More TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Micro-Channel Plate Photo-Multiplier Tube (MCP-PMT) detectors. A single-photon timing resolution of 70 ps is targeted to achieve the desired separation of pions and kaons, with an expectation of around 30 detected photons per track. Studies of the performance of a small-scale TORCH demonstrator with a radiator of dimensions 120 $\times$ 350 $\times$ 10 mm$^3$ have been performed in two test-beam campaigns during November 2017 and June 2018. Single-photon time resolutions ranging from 104.3 ps to 114.8 ps and 83.8 ps to 112.7 ps have been achieved for MCP-PMTs with granularity 4 $\times$ 64 and 8 $\times$ 64 pixels, respectively. Photon yields are measured to be within $\sim$10% and $\sim$30% of simulation, respectively. Finally, the outlook for future work with planned improvements is presented. △ Less

Submitted 18 February, 2020; originally announced February 2020.

Comments: 21 pages, 9 figures, to be published in Nuclear Inst. and Methods in Physics Research, A

Beam tests of a large-scale TORCH time-of-flight demonstrator

Authors: Thomas H. Hancock, Srishti Bhasin, Thomas Blake, Nicholas Brook, Tom Conneely, David Cussans, Roger Forty, Christophe Frei, Emmy P. M. Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom T. Hadavizadeh, Neville Harnew, Michel Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker, Maarten van Dijk

Abstract: The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multipli… ▽ More The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMT) detectors. The goal is to achieve a single-photon timing resolution of 70 ps, giving a timing precision of 15 ps per charged particle by combining the information from around 30 detected photons. The MCP-PMT detectors have been developed with a commercial partner (Photek Ltd, UK), leading to the delivery of a square tube of active area 53 $\times$ 53mm$^2$ with a granularity of 8 $\times$ 128 pixels equivalent. A large-scale demonstrator of TORCH, having a quartz plate of dimensions 660 $\times$ 1250 $\times$ 10 mm$^3$ and read out by a pair of MCP-PMTs with custom readout electronics, has been verified in a test beam campaign at the CERN PS. Preliminary results indicate that the required performance is close to being achieved. The anticipated performance of a full-scale TORCH detector at the LHCb experiment is presented. △ Less

Submitted 25 April, 2019; originally announced April 2019.

Comments: 12 pages, 7 figures, Paper submitted to Nuclear Instruments & Methods in Physics Research, Section A - Special Issue VCI 2019

Status of the TORCH time-of-flight project

Authors: Neville Harnew, Srishti Bhasin, Thomas Blake, Nicholas Brook, Tom Conneely, David Cussans, Maarten van Dijk, Roger Forty, Christoph Frei, Emmy Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom Hadavizadeh, Thomas Hancock, Michel Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker

Abstract: TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers… ▽ More TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers (MCP-PMTs) of active area 53 x 53 mm^2, segmented into 8 x 128 pixels equivalent. A small-scale TORCH demonstrator with a customised MCP-PMT and associated readout electronics has been successfully operated in a 5 GeV/c mixed pion/proton beam at the CERN PS facility. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved. The expected performance of a full-scale TORCH detector for the Upgrade II of the LHCb experiment is also discussed. △ Less

Submitted 23 December, 2018; originally announced December 2018.

Comments: 9 pages, 6 figures, Paper submitted to Nuclear and Methods A : Proceedings of the 10th International Workshop on Ring Imaging Cherenkov Detectors (RICH 2018), Moscow, Russia, July 29 to August 4 2018

TORCH: a large area time-of-flight detector for particle identification

Authors: Neville Harnew, Srishti Bhasin, Thomas Blake, Nicholas Brook, Tom Conneely, David Cussans, Maarten van Dijk, Roger Forty, Christophe Frei, Emmy Gabriel, Rui Gao, Timothy Gershon, Thierry Gys, Tom T. Hadavizadeh, Thomas Hancock, Michel Kreps, James Milnes, Didier Piedigrossi, Jonas Rademacker

Abstract: TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 1… ▽ More TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved. △ Less

Submitted 3 December, 2018; v1 submitted 15 October, 2018; originally announced October 2018.

Comments: 5 pages, 2 figures, Paper submitted to Nuclear and Methods A : Proceedings of Frontier Detectors for Frontier Physics - 14th Pisa Meeting on Advanced Detectors

Tetraquarks and pentaquarks

Authors: Greig Cowan, Tim Gershon

Abstract: Greig Cowan and Tim Gershon describe new types of matter called tetraquarks and pentaquarks, and discuss the outlook for understanding these particles. Greig Cowan and Tim Gershon describe new types of matter called tetraquarks and pentaquarks, and discuss the outlook for understanding these particles. △ Less

Submitted 13 August, 2018; originally announced August 2018.

Comments: Published as a Physics World Discovery eBook, by IoP Publishing, 2018. Available online at http://iopscience.iop.org/book/978-0-7503-1593-7, IoP Publishing 2018. ISBN: 978-0-7503-1593-7

Map** the material in the LHCb vertex locator using secondary hadronic interactions

Authors: M. Alexander, W. Barter, A. Bay, L. J. Bel, M. van Beuzekom, G. Bogdanova, S. Borghi, T. J. V. Bowcock, E. Buchanan, J. Buytaert, K. Carvalho Akiba, S. Chen, V. Coco, P. Collins, A. Crocombe, F. Da Cunha Marinho, E. Dall'Occo, S. De Capua, C. T. Dean, F. Dettori, D. Dossett, K. Dreimanis, G. Dujany, L. Eklund, T. Evans , et al. (41 additional authors not shown)

Abstract: Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties… ▽ More Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties of a reconstructed secondary vertex and its constituent tracks, a $p$-value can be assigned to the hypothesis that the secondary vertex originates from a material interaction. A validation of this procedure is presented using photon conversions to dimuons. △ Less

Submitted 18 June, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

Comments: All figures and tables are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2018-002.html

Report number: CERN-LHCb-DP-2018-002

Journal ref: JINST 13, P06008 (2018)

Laura++ : a Dalitz plot fitter

Authors: John Back, Tim Gershon, Paul Harrison, Thomas Latham, Daniel O'Hanlon, Wenbin Qian, Pablo del Amo Sanchez, Daniel Craik, Jelena Ilic, Juan Martin Otalora Goicochea, Eugenia Puccio, Rafael Silva Coutinho, Mark Whitehead

Abstract: The Dalitz plot analysis technique has become an increasingly important method in heavy flavour physics. The Laura++ fitter has been developed as a flexible tool that can be used for Dalitz plot analyses in different experimental environments. Explicitly designed for three-body decays of heavy-flavoured mesons to spinless final state particles, it is optimised in order to describe all possible res… ▽ More The Dalitz plot analysis technique has become an increasingly important method in heavy flavour physics. The Laura++ fitter has been developed as a flexible tool that can be used for Dalitz plot analyses in different experimental environments. Explicitly designed for three-body decays of heavy-flavoured mesons to spinless final state particles, it is optimised in order to describe all possible resonant or nonresonant contributions, and to accommodate possible CP violation effects. △ Less

Submitted 11 December, 2018; v1 submitted 27 November, 2017; originally announced November 2017.

Comments: 87 pages, 16 figures, version published in Computer Physics Communications + minor corrections to GS lineshape formulae in App. B

Journal ref: Computer Physics Communications 231 (2018) 198-242

Performance of the LHCb Vertex Locator

Authors: LHCb VELO Group, R. Aaij, A. Affolder, K. Akiba, M. Alexander, S. Ali, R. B. Appleby, M. Artuso, A. Bates, A. Bay, O. Behrendt, J. Benton, M. van Beuzekom, P. M. Bjørnstad, G. Bogdanova, S. Borghi, A. Borgia, T. J. V. Bowcock, J. van den Brand, H. Brown, J. Buytaert, O. Callot, J. Carroll, G. Casse, P. Collins , et al. (79 additional authors not shown)

Abstract: The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stabi… ▽ More The Vertex Locator (VELO) is a silicon microstrip detector that surrounds the proton-proton interaction region in the LHCb experiment. The performance of the detector during the first years of its physics operation is reviewed. The system is operated in vacuum, uses a bi-phase CO2 cooling system, and the sensors are moved to 7 mm from the LHC beam for physics data taking. The performance and stability of these characteristic features of the detector are described, and details of the material budget are given. The calibration of the timing and the data processing algorithms that are implemented in FPGAs are described. The system performance is fully characterised. The sensors have a signal to noise ratio of approximately 20 and a best hit resolution of 4 microns is achieved at the optimal track angle. The typical detector occupancy for minimum bias events in standard operating conditions in 2011 is around 0.5%, and the detector has less than 1% of faulty strips. The proximity of the detector to the beam means that the inner regions of the n+-on-n sensors have undergone space-charge sign inversion due to radiation damage. The VELO performance parameters that drive the experiment's physics sensitivity are also given. The track finding efficiency of the VELO is typically above 98% and the modules have been aligned to a precision of 1 micron for translations in the plane transverse to the beam. A primary vertex resolution of 13 microns in the transverse plane and 71 microns along the beam axis is achieved for vertices with 25 tracks. An impact parameter resolution of less than 35 microns is achieved for particles with transverse momentum greater than 1 GeV/c. △ Less

Submitted 10 September, 2014; v1 submitted 30 May, 2014; originally announced May 2014.

Comments: 61 pages, 33 figures Minor typographical changes made during journal review are implemented in this version

Report number: CERN-LHCb-DP-2014-001

Journal ref: 2014 JINST 9 P09007

Radiation damage in the LHCb Vertex Locator

Authors: A. Affolder, K. Akiba, M. Alexander, S. Ali, M. Artuso, J. Benton, M. van Beuzekom, P. M. Bjørnstad, G. Bogdanova, S. Borghi, T. J. V. Bowcock, H. Brown, J. Buytaert, G. Casse, P. Collins, S. De Capua, D. Dossett, L. Eklund, C. Farinelli, J. Garofoli, M. Gersabeck, T. Gershon, H. Gordon, J. Harrison, V. Heijne , et al. (26 additional authors not shown)

Abstract: The LHCb Vertex Locator (VELO) is a silicon strip detector designed to reconstruct charged particle trajectories and vertices produced at the LHCb interaction region. During the first two years of data collection, the 84 VELO sensors have been exposed to a range of fluences up to a maximum value of approximately $\rm{45 \times 10^{12}\,1\,MeV}$ neutron equivalent ($\rm{1\,MeV\,n_{eq}}$). At the op… ▽ More The LHCb Vertex Locator (VELO) is a silicon strip detector designed to reconstruct charged particle trajectories and vertices produced at the LHCb interaction region. During the first two years of data collection, the 84 VELO sensors have been exposed to a range of fluences up to a maximum value of approximately $\rm{45 \times 10^{12}\,1\,MeV}$ neutron equivalent ($\rm{1\,MeV\,n_{eq}}$). At the operational sensor temperature of approximately $-7\,^{\circ}\rm{C}$, the average rate of sensor current increase is $18\,\upmu\rm{A}$ per $\rm{fb^{-1}}$, in excellent agreement with predictions. The silicon effective bandgap has been determined using current versus temperature scan data after irradiation, with an average value of $E_{g}=1.16\pm0.03\pm0.04\,\rm{eV}$ obtained. The first observation of n-on-n sensor type inversion at the LHC has been made, occurring at a fluence of around $15 \times 10 ^{12}$ of $1\,\rm{MeV\,n_{eq}}$. The only n-on-p sensors in use at the LHC have also been studied. With an initial fluence of approximately $\rm{3 \times 10^{12}\,1\,MeV\,n_{eq}}$, a decrease in the Effective Depletion Voltage (EDV) of around 25\,V is observed, attributed to oxygen induced removal of boron interstitial sites. Following this initial decrease, the EDV increases at a comparable rate to the type inverted n-on-n type sensors, with rates of $(1.43\pm 0.16) \times 10 ^{-12}\,\rm{V} / \, 1 \, \rm{MeV\,n_{eq}}$ and $(1.35\pm 0.25) \times 10 ^{-12}\,\rm{V} / \, 1 \, \rm{MeV\,n_{eq}}$ measured for n-on-p and n-on-n type sensors, respectively. A reduction in the charge collection efficiency due to an unexpected effect involving the second metal layer readout lines is observed. △ Less

Submitted 21 February, 2013; originally announced February 2013.

Report number: CERN-LHCb-DP-2012-005

Absolute luminosity measurements with the LHCb detector at the LHC

Authors: The LHCb Collaboration, R. Aaij, B. Adeva, M. Adinolfi, C. Adrover, A. Affolder, Z. Ajaltouni, J. Albrecht, F. Alessio, M. Alexander, G. Alkhazov, P. Alvarez Cartelle, A. A. Alves Jr, S. Amato, Y. Amhis, J. Anderson, R. B. Appleby, O. Aquines Gutierrez, F. Archilli, L. Arrabito, A. Artamonov, M. Artuso, E. Aslanides, G. Auriemma, S. Bachmann , et al. (549 additional authors not shown)

Abstract: Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-prot… ▽ More Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic "van der Meer scan" method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5% in the absolute luminosity determination is reached. The techniques used to transport the absolute luminosity calibration to the full 2010 data-taking period are presented. △ Less

Submitted 11 January, 2012; v1 submitted 13 October, 2011; originally announced October 2011.

Comments: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6, 9 and 10 and corresponding explanation in the text

Report number: LHCb-PAPER-2011-015; CERN-PH-EP-2011-157

Journal ref: 2012 JINST 7 P01010

SuperB: a linear high-luminosity B Factory

Authors: J. Albert, S. Bettarini, M. Biagini, G. Bonneaud, Y. Cai, G. Calderini, M. Ciuchini, G. P. Dubois-Felsmann, S. Ecklund, F. Forti, T. J. Gershon, M. A. Giorgi, D. G. Hitlin, D. W. G. S. Leith, A. Lusiani, D. B. MacFarlane, F. Martinez-Vidal, N. Neri, A. Novokhatski, M. Pierini, G. Piredda, S. Playfer, F. C. Porter, P. Raimondi, B. N. Ratcliff , et al. (7 additional authors not shown)

Abstract: This paper is based on the outcome of the activity that has taken place during the recent workshop on "SuperB in Italy" held in Frascati on November 11-12, 2005. The workshop was opened by a theoretical introduction of Marco Ciuchini and was structured in two working groups. One focused on the machine and the other on the detector and experimental issues. The present status on CP is mainly bas… ▽ More This paper is based on the outcome of the activity that has taken place during the recent workshop on "SuperB in Italy" held in Frascati on November 11-12, 2005. The workshop was opened by a theoretical introduction of Marco Ciuchini and was structured in two working groups. One focused on the machine and the other on the detector and experimental issues. The present status on CP is mainly based on the results achieved by BaBar and Belle. Estabilishment of the indirect CP violation in B sector in 2001 and of the direct CP violation in 2004 thanks to the success of PEP-II and KEKB e+e- asymmetric B Factories operating at the center of mass energy corresponding to the mass of the Y(4s). With the two B Factories taking data, the Unitarity Triangle is now beginning to be overconstrained by improving the measurements of the sides and now also of the angles alpha, and gamma. We are also in presence of the very intriguing results about the measurements of sin(2 beta) in the time dependent analysis of decay channels via penguin loops, where b --> s sbar s and b --> s dbar d. Tau physics, in particular LFV search, as well as charm and ISR physics are important parts of the scientific program of a SuperB Factory. The physics case together with possible scenarios for the high luminosity SuperB Factory based on the concepts of the Linear Collider and the related experimental issues are discussed. △ Less

Submitted 23 December, 2005; originally announced December 2005.

Comments: 22 pages, 22 figures, INFN Roadmap Report

Report number: INFN-AE 05-08