-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Electrically tunable, rapid spin-orbit torque induced modulation of colossal magnetoresistance in Mn$_3$Si$_2$Te$_6$ nanoflakes
Authors:
Cheng Tan,
Mingxun Deng,
Yuanjun Yang,
Linlin An,
Weifeng Ge,
Sultan Albarakati,
Majid Panahandeh-Fard,
James Partridge,
Dimitrie Culcer,
Bin Lei,
Tao Wu,
Xiangde Zhu,
Mingliang Tian,
Xianhui Chen,
Rui-Qiang Wang,
Lan Wang
Abstract:
As a quasi-layered ferrimagnetic material, Mn$_3$Si$_2$Te$_6$ nanoflakes exhibit magnetoresistance behaviour that is fundamentally different from their bulk crystal counterparts. They offer three key properties crucial for spintronics. Firstly, at least 10^6 times faster response comparing to that exhibited by bulk crystals has been observed in current-controlled resistance and magnetoresistance.…
▽ More
As a quasi-layered ferrimagnetic material, Mn$_3$Si$_2$Te$_6$ nanoflakes exhibit magnetoresistance behaviour that is fundamentally different from their bulk crystal counterparts. They offer three key properties crucial for spintronics. Firstly, at least 10^6 times faster response comparing to that exhibited by bulk crystals has been observed in current-controlled resistance and magnetoresistance. Secondly, ultra-low current density is required for resistance modulation (~ 5 A/cm$^2$). Thirdly, electrically gate-tunable magnetoresistance has been realized. Theoretical calculations reveal that the unique magnetoresistance behaviour in the Mn$_3$Si$_2$Te$_6$ nanoflakes arises from a magnetic field induced band gap shift across the Fermi level. The rapid current induced resistance variation is attributed to spin-orbit torque, an intrinsically ultra-fast process (~nanoseconds). This study suggests promising avenues for spintronic applications. In addition, it highlights Mn$_3$Si$_2$Te$_6$ nanoflakes as a suitable platform for investigating the intriguing physics underlying chiral orbital moments, magnetic field induced band variation and spin torque.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Towards Improved Quantum Simulations and Sensing with Trapped 2D Ion Crystals via Parametric Amplification
Authors:
Matt Affolter,
Wenchao Ge,
Bryce Bullock,
Shaun C. Burd,
Kevin A. Gilmore,
Jennifer F. Lilieholm,
Allison L. Carter,
John J. Bollinger
Abstract:
Improving coherence is a fundamental challenge in quantum simulation and sensing experiments with trapped ions. Here we discuss, experimentally demonstrate, and estimate the potential impacts of two different protocols that enhance, through motional parametric excitation, the coherent spin-motion coupling of ions obtained with a spin-dependent force. The experiments are performed on 2D crystal arr…
▽ More
Improving coherence is a fundamental challenge in quantum simulation and sensing experiments with trapped ions. Here we discuss, experimentally demonstrate, and estimate the potential impacts of two different protocols that enhance, through motional parametric excitation, the coherent spin-motion coupling of ions obtained with a spin-dependent force. The experiments are performed on 2D crystal arrays of approximately one hundred $^9$Be$^+$ ions confined in a Penning trap. By modulating the trap** potential at close to twice the center-of-mass mode frequency, we squeeze the motional mode and enhance the spin-motion coupling while maintaining spin coherence. With a stroboscopic protocol, we measure $5.4 \pm 0.9$ dB of motional squeezing below the ground-state motion, from which theory predicts a $10$ dB enhancement in the sensitivity for measuring small displacements using a recently demonstrated protocol [Science $\textbf{373}$, 673 (2021)]. With a continuous squeezing protocol, we measure and accurately calibrate the parametric coupling strength. Theory suggests this protocol can be used to improve quantum spin squeezing, limited in our system by off-resonant light scatter. We illustrate numerically the trade-offs between strong parametric amplification and motional dephasing in the form of center-of-mass frequency fluctuations for improving quantum spin squeezing in our set-up.
△ Less
Submitted 29 March, 2023; v1 submitted 19 January, 2023;
originally announced January 2023.
-
$Bρ$-defined isochronous mass spectrometry: a new approach for high-precision mass measurements of short-lived nuclei
Authors:
M. Wang,
M. Zhang,
X. Zhou,
Y. H. Zhang,
Yu. A. Litvinov,
H. S. Xu,
R. J. Chen,
H. Y. Deng,
C. Y. Fu,
W. W. Ge,
H. F. Li,
T. Liao,
S. A. Litvinov,
P. Shuai,
J. Y. Shi,
M. Si,
R. S. Sidhu,
Y. N. Song,
M. Z. Sun,
S. Suzuki,
Q. Wang,
Y. M. Xing,
X. Xu,
T. Yamaguchi,
X. L. Yan
, et al. (4 additional authors not shown)
Abstract:
A novel technique for broadband high-precision mass measurements of short-lived exotic nuclides is reported. It is based on the isochronous mass spectrometry (IMS) and realizes simultaneous determinations of revolution time and velocity of short-lived stored ions at the cooler storage ring CSRe in Lanzhou. The new technique, named as the $Bρ$-defined IMS or $Bρ$-IMS, boosts the efficiency, sensiti…
▽ More
A novel technique for broadband high-precision mass measurements of short-lived exotic nuclides is reported. It is based on the isochronous mass spectrometry (IMS) and realizes simultaneous determinations of revolution time and velocity of short-lived stored ions at the cooler storage ring CSRe in Lanzhou. The new technique, named as the $Bρ$-defined IMS or $Bρ$-IMS, boosts the efficiency, sensitivity, and accuracy of mass measurements, and is applied here to measure masses of neutron-deficient $fp$-shell nuclides. In a single accelerator setting, masses of $^{46}$Cr, $^{50}$Fe and $^{54}$Ni are determined with relative uncertainties of (5~-~6)$\times10^{-8}$, thereby improving the input data for testing the unitarity of the Cabibbo-Kobayashi-Maskawa quark mixing matrix. This is the technique of choice for future high-precision measurements of the most rarely produced shortest-lived nuclides.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
Model-based quantitative methods to predict irradiation-induced swelling in alloys
Authors:
Wei Ge,
Shijun Zhao,
Chenxu Wang,
Haocheng Liu,
Yue Su,
Jia Huang,
Zhiying Gao,
Jianming Xue,
Steven J. Zinkle,
Yugang Wang
Abstract:
Predicting volume swelling of structural materials in nuclear reactors under high-dose neutron irradiations based on existing low-dose experiments or irradiation data with high-dose-rate energetic particles has been a long-standing challenge for safety evaluation and rapidly screening irradiation-resistant materials in nuclear energy systems. Here, we build an Additional Defect Absorption Model th…
▽ More
Predicting volume swelling of structural materials in nuclear reactors under high-dose neutron irradiations based on existing low-dose experiments or irradiation data with high-dose-rate energetic particles has been a long-standing challenge for safety evaluation and rapidly screening irradiation-resistant materials in nuclear energy systems. Here, we build an Additional Defect Absorption Model that describes the irradiation-induced swelling effects produced by energetic electrons, heavy-ions, and neutrons by considering additional defect sinks inherent in the irradiation process. Based on this model, we establish quantitative methods to predict high-dose swelling from low-dose behavior and obtain the equivalent irradiation dose for different energetic particles when the dose rates differ by several orders of magnitude. Furthermore, we propose a universal parameter to characterize the swelling resistance of various alloys and predict their radiation tolerances under different radiation conditions. This work provides quantitative prediction methods for evaluating irradiation-induced swelling effects of structural materials, which is critical to the safety and material development for advanced nuclear reactors.
△ Less
Submitted 6 January, 2022;
originally announced January 2022.
-
Photo-induced Macro/Mesoscopic Scale Ion Segregation in Mixed-Halide Perovskites: Ring Structure and Ionic Plasma Oscillations
Authors:
Xiaoxiao Sun,
Yong Zhang,
Weikun Ge
Abstract:
Contrary to the common belief that light-induced halide ion segregation in a mixed halide al-loy occurs within the illuminated area, we find that the Br ions released by light diffuse away from the area, which generates a counter-balancing Coulombic force between the anion deficit and surplus region, together resulting in a macro/mesoscopic size anion ring surrounding the center, showing a photolu…
▽ More
Contrary to the common belief that light-induced halide ion segregation in a mixed halide al-loy occurs within the illuminated area, we find that the Br ions released by light diffuse away from the area, which generates a counter-balancing Coulombic force between the anion deficit and surplus region, together resulting in a macro/mesoscopic size anion ring surrounding the center, showing a photoluminescence ring. Upon removing the illumination, the displaced anions return to the illuminated area, and the restoring force leads to a damped ultra-low-frequency oscillatory ion motion, which may be the first observation of an ionic plasma oscillation in solids.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Electrostatic-lenses position-sensitive TOF MCP detector for beam diagnostics and new scheme for mass measurements at HIAF
Authors:
un-hao Liu,
Zhuang Ge,
Qian Wang,
Geng Wang,
Li-na Sheng,
Wen-wen Ge,
Xing Xu,
Peng Shuai,
Qi Zeng,
Bo Wu
Abstract:
A foil-microchannel plate (MCP) detector, which uses electrostatic lenses and possesses both good position and timing resolutions, has been designed and simulated for beam diagnostics and mass measurements at the next-generation heavy-ion-beam facility HIAF in China. Characterized by low energy loss and good performances of timing and position measurements, it would be located at focal planes in f…
▽ More
A foil-microchannel plate (MCP) detector, which uses electrostatic lenses and possesses both good position and timing resolutions, has been designed and simulated for beam diagnostics and mass measurements at the next-generation heavy-ion-beam facility HIAF in China. Characterized by low energy loss and good performances of timing and position measurements, it would be located at focal planes in fragment separator HFRS for position monitoring, beam turning, B$ρ$ measurement, and trajectory reconstruction. Moreover, it will benefit the building-up of a magnetic-rigidity-energy-loss-time-of-flight (B$ρ$-$Δ$E-TOF) method at HFRS for high-precision in-flight particle identification (PID) of radioactive isotope (RI) beams on an event-by-event basis. Most importantly, the detector can be utilized for in-ring TOF and position measurements, beam-line TOF measurements at two achromatic foci, and position measurements at a dispersive focus of HFRS, thus making it possible to use two complementary mass measurement methods (isochronous mass spectrometry (IMS) at the storage ring SRing and magnetic-rigidity-time-of-flight (B$ρ$-TOF) at the beam-line HFRS) in one single experimental run.
△ Less
Submitted 30 May, 2021;
originally announced May 2021.
-
Quantum amplification of boson-mediated interactions
Authors:
S. C. Burd,
R. Srinivas,
H. M. Knaack,
W. Ge,
A. C. Wilson,
D. J. Wineland,
D. Leibfried,
J. J. Bollinger,
D. T. C. Allcock,
D. H. Slichter
Abstract:
Strong and precisely-controlled interactions between quantum objects are essential for quantum information processing, simulation, and sensing, and for the formation of exotic quantum matter. A well-established paradigm for coupling otherwise weakly-interacting quantum objects is to use auxiliary bosonic quantum excitations to mediate the interactions. Important examples include photon-mediated in…
▽ More
Strong and precisely-controlled interactions between quantum objects are essential for quantum information processing, simulation, and sensing, and for the formation of exotic quantum matter. A well-established paradigm for coupling otherwise weakly-interacting quantum objects is to use auxiliary bosonic quantum excitations to mediate the interactions. Important examples include photon-mediated interactions between atoms, superconducting qubits, and color centers in diamond, and phonon-mediated interactions between trapped ions and between optical and microwave photons. Boson-mediated interactions can in principle be amplified through parametric driving of the boson channel; the drive need not couple directly to the interacting quantum objects. This technique has been proposed for a variety of quantum platforms, but has not to date been realized in the laboratory. Here we experimentally demonstrate the amplification of a boson-mediated interaction between two trapped-ion qubits by parametric modulation of the trap** potential. The amplification provides up to a 3.25-fold increase in the interaction strength, validated by measuring the speedup of two-qubit entangling gates. This amplification technique can be used in any quantum platform where parametric modulation of the boson channel is possible, enabling exploration of new parameter regimes and enhanced quantum information processing.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
Operational Resource Theory of Nonclassicality via Quantum Metrology
Authors:
Wenchao Ge,
Kurt Jacobs,
Saeed Asiri,
Michael Foss-Feig,
M. Suhail Zubairy
Abstract:
The nonclassical properties of quantum states are of tremendous interest due to their potential applications in future technologies. It has recently been realized that the concept of a "resource theory" is a powerful approach to quantifying and understanding nonclassicality. To realize the potential of this approach one must first find resource theoretic measures of nonclassicality that are "opera…
▽ More
The nonclassical properties of quantum states are of tremendous interest due to their potential applications in future technologies. It has recently been realized that the concept of a "resource theory" is a powerful approach to quantifying and understanding nonclassicality. To realize the potential of this approach one must first find resource theoretic measures of nonclassicality that are "operational", meaning that they also quantify the ability of quantum states to provide enhanced performance for specific tasks, such as precision sensing. Here we achieve a significant milestone in this endeavor by presenting the first such operational resource theoretic measure. In addition to satisfying the requirements of a resource measure, it has the closest possible relationship to the quantum-enhancement provided by a non-classical state for measuring phase-space displacement: it is equal to this enhancement for pure states, and is a tight upper bound on it for mixed states. We also show that a lower-bound on this measure can be obtained experimentally using a simple Mach-Zehnder interferometer.
△ Less
Submitted 11 May, 2020; v1 submitted 5 November, 2019;
originally announced November 2019.
-
Production of ultra-low radioactivity NaI(Tl) crystals for Dark Matter detectors
Authors:
Y. Zhu,
S. H. Yue,
Z. W. Ge,
Y. W. Zhu,
X. J. Yin,
I. Dafinei,
G. DImperio,
M. Diemoz,
V. Pettinacci,
S. Nisi,
C. Tomei,
H. B. Zhao,
B. Xu,
J. Fang,
Q,
. W. Tu
Abstract:
Scintillating NaI(Tl) crystals are widely used in a large variety of experimental applications. However, for the use as Dark Matter (DM) detectors, such crystals demand a high level of radio-purity, not achievable by means of standard industrial techniques. One of the main difficulties comes from the presence of potassium that always accompanies sodium in alkali halides. On the other hand, the arg…
▽ More
Scintillating NaI(Tl) crystals are widely used in a large variety of experimental applications. However, for the use as Dark Matter (DM) detectors, such crystals demand a high level of radio-purity, not achievable by means of standard industrial techniques. One of the main difficulties comes from the presence of potassium that always accompanies sodium in alkali halides. On the other hand, the arguable DM detection by DAMA experiment using NaI(Tl) scintillating crystals requires a reliable verification able to either confirm the existence of DM or rule out the DAMA claim. Ultra-low radioactivity NaI(Tl) crystals, particularly with very low potassium content, are therefore indispensable to overcome the current stalemate in Dark Matter searches. Nonetheless, apart from DAMA-LIBRA experiments, to date, no other experiment has succeeded in building a detector from NaI(Tl) crystals with potassium content of ppb level. This work describes recent results in the preparation of ultra-radio-pure NaI(Tl) crystals using a modified Bridgman method. A double-walled platinum crucible technique has been designed and reliability tests show that 5 ppb of potassium in the NaI(Tl) crystals of 2 and 3 inches in diameter can be achieved starting from NaI powder with potassium content of the order of 10 ppb. The potassium excess is segregated in the tail-side of the as grown ingot where measured potassium concentration is above 20 ppb. The purifying effect of Bridgman growth for larger NaI(Tl) crystals is currently being tested. The work also reports on scintillation parameters of our NaI(Tl) crystals measured in a dedicated setup conceived for naked, hygroscopic crystals. The reproducible and reliable production of ultra-low radioactivity NaI(Tl) crystals reported in this work will hopefully spur the construction of new DM search experiments and, anyway, clarify the controversial DAMA-LIBRA results.
△ Less
Submitted 25 September, 2019;
originally announced September 2019.
-
Heisenberg-Scaling Measurement Protocol for Analytic Functions with Quantum Sensor Networks
Authors:
Kevin Qian,
Zachary Eldredge,
Wenchao Ge,
Guido Pagano,
Christopher Monroe,
James V. Porto,
Alexey V. Gorshkov
Abstract:
We generalize past work on quantum sensor networks to show that, for $d$ input parameters, entanglement can yield a factor $\mathcal O(d)$ improvement in mean squared error when estimating an analytic function of these parameters. We show that the protocol is optimal for qubit sensors, and conjecture an optimal protocol for photons passing through interferometers. Our protocol is also applicable t…
▽ More
We generalize past work on quantum sensor networks to show that, for $d$ input parameters, entanglement can yield a factor $\mathcal O(d)$ improvement in mean squared error when estimating an analytic function of these parameters. We show that the protocol is optimal for qubit sensors, and conjecture an optimal protocol for photons passing through interferometers. Our protocol is also applicable to continuous variable measurements, such as one quadrature of a field operator. We outline a few potential applications, including calibration of laser operations in trapped ion quantum computing.
△ Less
Submitted 5 August, 2020; v1 submitted 25 January, 2019;
originally announced January 2019.
-
Experimental Investigation of the Transition Energy $γ_t$ in the Isochronous Mode of the HIRFL-CSRe
Authors:
W. W. Ge,
Y. J. Yuan,
J. C. Yang,
R. J. Chen,
X. L. Yan,
H. Du,
Z. S. Li,
J. Yang,
D. Y. Yin,
L. J. Mao,
X. N. Li,
W. H. Zheng,
G. D. Shen,
B. Wu,
S. Ruan,
G. Wang,
H. Zhao,
M. Wang,
M. Z. Sun,
Y. M. Xing,
P. Zhang,
C. Y. Fu,
P. Shuai,
X. Xu,
Y. H. Zhang
, et al. (9 additional authors not shown)
Abstract:
The Isochronous Mass Spectrometry (IMS) based on storage rings is a powerful technique for mass measurement of short-lived exotic nuclei. The transition energy $γ_t$ of the storage ring is a vital parameter of the IMS technique. It is difficult to measure the $γ_t$ and its relation to momentum spread or circulating length, especially to monitor the variation of $γ_t$ during experiments. An experim…
▽ More
The Isochronous Mass Spectrometry (IMS) based on storage rings is a powerful technique for mass measurement of short-lived exotic nuclei. The transition energy $γ_t$ of the storage ring is a vital parameter of the IMS technique. It is difficult to measure the $γ_t$ and its relation to momentum spread or circulating length, especially to monitor the variation of $γ_t$ during experiments. An experimental investigation on the $γ_t$ has been performed for the IMS experiment at the Cooler Storage Ring of the Heavy Ion Research Facility in Lanzhou (HIRFL-CSRe). With the velocity measured by two time-of-flight (TOF) detectors, the $γ_t$ as a function of orbital length can be determined. The influences of higher order magnetic field components on the $γ_t$ function were inferred for isochronous correction. This paper introduces and investigates the influence of dipole magnetic fields, quadrupole magnetic fields and sextupole magnetic fields on the $γ_t$ function. With the quadrupole magnets and sextupole magnets corrections, a mass resolution of 171332 (FWHM) and $σ(T)/T=1.34\times10^{-6}$ were reached, which shall be compared with 31319 (FWHM) and $σ(T)/T=7.35\times10^{-6}$ obtained without correction.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
A method to measure the transition energy $γ_{t}$ of the isochronously tuned storage ring
Authors:
R. J. Chen,
X. L. Yan,
W. W. Ge,
Y. J. Yuan,
M. Wang,
M. Z. Sun,
Y. M. Xing,
P. Zhang,
C. Y. Fu,
P. Shuai,
X. Xu,
Y. H. Zhang,
T. Bao,
X. C. Chen,
X. J. Hu,
W. J. Huang,
H. F. Li,
J. H. Liu,
Yu. A. Litvinov,
S. A. Litvinov,
L. J. Mao,
B. Wu,
H. S. Xu,
J. C. Yang,
D. Y. Yin
, et al. (5 additional authors not shown)
Abstract:
The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy $γ_{t}$. %The transition energy $γ_{t}$ plays an important role in the isochronous mass spectrometry (IMS). It has bee…
▽ More
The Isochronous Mass Spectrometry (IMS) is a powerful technique developed in heavy-ion storage rings for measuring masses of very short-lived exotic nuclei. The IMS is based on the isochronous setting of the ring. One of the main parameters of this setting is the transition energy $γ_{t}$. %The transition energy $γ_{t}$ plays an important role in the isochronous mass spectrometry (IMS). It has been a challenge to determine the $γ_{t}$ and especially to monitor the variation of $γ_{t}$ during experiments. In this paper we introduce a method to measure the $γ_{t}$ online during IMS experiments by using the acquired experimental data. Furthermore, since the storage ring has (in our context) a relatively large momentum acceptance, the variation of the $γ_{t}$ across the ring acceptance is a source of systematic uncertainty of measured masses. With the installation of two time-of-flight (TOF) detectors, the velocity of each stored ion and its revolution time are simultaneously available for the analysis. These quantities enabled us to determine the $γ_{t}$ as a function of orbital length in the ring. The presented method is especially important for future IMS experiments planned at the new-generation storage ring facilities FAIR in Germany and HIAF in China.
△ Less
Submitted 22 November, 2018;
originally announced November 2018.
-
Simulation of longitudinal dynamics of laser-cooled and RF-bunched C$^{3+}$ ion beams at heavy ion storage ring CSRe
Authors:
Xiao-Ni Li,
Wei-Qiang Wen,
Heng Du,
Peng Li,
Xiao-Hu Zhang,
Xue-**g Hu,
Guo-Feng Qu,
Zhong-Shan Li,
Wen-Wen Ge,
Jie Li,
Han-Bing Wang,
Jia-Wen Xia,
Jian-Cheng Yang,
Xin-Wen Ma,
You-** Yuan
Abstract:
Laser cooling of relativistic heavy ion beams of Li-like C$^{3+}$ and O$^{4+}$ is being in preparation at the experimental Cooler Storage Ring (CSRe). Recently, a preparatory experiment to test important prerequisites for laser cooling of relativistic $^{12}$C$^{3+}$ ion beams using a pulsed laser system has been performed at the CSRe. Unfortunately, the interaction between the ions and the pulsed…
▽ More
Laser cooling of relativistic heavy ion beams of Li-like C$^{3+}$ and O$^{4+}$ is being in preparation at the experimental Cooler Storage Ring (CSRe). Recently, a preparatory experiment to test important prerequisites for laser cooling of relativistic $^{12}$C$^{3+}$ ion beams using a pulsed laser system has been performed at the CSRe. Unfortunately, the interaction between the ions and the pulsed laser cannot be detected. In order to study the laser cooling process and find the optimized parameters for future laser cooling experiment, a multi-particle tracking method was developed to simulate the detailed longitudinal dynamics of laser-cooled ion beams at the CSRe. The simulations of laser cooling of the $^{12}$C$^{3+}$ ion beams by scanning the frequency of RF-buncher or continuous wave (CW) laser wavelength were performed. The simulation results indicated that a large momentum spread ion beams could be laser-cooled by the combination of only one CW laser and the RF-buncher and shown the requirements of a successful laser cooling experiment. The optimized parameters for scanning the RF-buncher frequency or laser frequency were obtained. Furthermore, the heating effects were estimated for laser cooling at the CSRe. The Schottky noise spectra of longitudinally modulated and laser-cooled ion beams was simulated to fully explain and anticipate the experimental results. The combination of Schottky spectra from the highly sensitive resonant Schottky pick-up and the simulation methods developed in this paper will be helpful to investigate the longitudinal dynamics of RF-bunched and ultra-cold ion beams in the upcoming laser cooling experiments at the CSRe.
△ Less
Submitted 6 April, 2017;
originally announced April 2017.
-
Feedback-induced Bistability of an Optically Levitated Nanoparticle: A Fokker-Planck Treatment
Authors:
Wenchao Ge,
Brandon Rodenburg,
M. Bhattacharya
Abstract:
Optically levitated nanoparticles have recently emerged as versatile platforms for investigating macroscopic quantum mechanics and enabling ultrasensitive metrology. In this article we theoretically consider two dam** regimes of an optically levitated nanoparticle cooled by cavityless parametric feedback. Our treatment is based on a generalized Fokker-Planck equation derived from the quantum mas…
▽ More
Optically levitated nanoparticles have recently emerged as versatile platforms for investigating macroscopic quantum mechanics and enabling ultrasensitive metrology. In this article we theoretically consider two dam** regimes of an optically levitated nanoparticle cooled by cavityless parametric feedback. Our treatment is based on a generalized Fokker-Planck equation derived from the quantum master equation presented recently and shown to agree very well with experiment [1]. For low dam**, we find that the resulting Wigner function yields the single-peaked oscillator position distribution and recovers the appropriate energy distribution derived earlier using a classical theory and verified experimentally [2]. For high dam**, in contrast, we predict a double-peaked position distribution, which we trace to an underlying bistability induced by feedback. Unlike in cavity-based optomechanics, stochastic processes play a major role in determining the bistable behavior. To support our conclusions, we present analytical expressions as well as numerical simulations using the truncated Wigner function approach. Our work opens up the prospect of develo** bistability-based devices, characterization of phase-space dynamics, and investigation of the quantum-classical transition using levitated nanoparticles.
△ Less
Submitted 25 April, 2016; v1 submitted 22 April, 2016;
originally announced April 2016.
-
A data analysis method for isochronous mass spectrometry using two time-of-flight detectors at CSRe
Authors:
Xing Xu,
Meng Wang,
Peng Shuai,
Rui-Jiu Chen,
Xin-Liang Yan,
Yu-Hu Zhang,
You-** Yuan,
Hu-Shan Xu,
Xiao-Hong Zhou,
Yuri A. Litvinov,
Sergey Litvinov,
Xiao-Lin Tu,
Xiang-Cheng Chen,
Chao-Yi Fu,
Wen-Wen Ge,
Zhuang Ge,
Xue-**g Hu,
Wen-Jia Huang,
Da-Wei Liu,
Yuan-Ming Xing,
Qi Zeng,
Wei Zhang
Abstract:
The concept of isochronous mass spectrometry (IMS) applying two time-of-flight (TOF) detectors originated many years ago at GSI. However, the corresponding method for data analysis has never been discussed in detail. Recently, two TOF detectors have been installed at CSRe and the new working mode of the ring is under test. In this paper, a data analysis method for this mode is introduced and teste…
▽ More
The concept of isochronous mass spectrometry (IMS) applying two time-of-flight (TOF) detectors originated many years ago at GSI. However, the corresponding method for data analysis has never been discussed in detail. Recently, two TOF detectors have been installed at CSRe and the new working mode of the ring is under test. In this paper, a data analysis method for this mode is introduced and tested with a series of simulations. The results show that the new IMS method can significantly improve mass resolving power via the additional velocity information of stored ions. This improvement is especially important for nuclides with Lorentz factor $γ$-value far away from the transition point $γ_t$ of the storage ring CSRe.
△ Less
Submitted 21 March, 2016;
originally announced March 2016.
-
Conservation relation of nonclassicality and entanglement for Gaussian states in a beam-splitter
Authors:
Wenchao Ge,
Mehmet Emre Tasgin,
M. Suhail Zubairy
Abstract:
We study the relation between single-mode nonclassicality and two-mode entanglement in a beam-splitter. We show that not all of the nonclassicality (entanglement potential) is transformed into two-mode entanglement for an incident single-mode light. Some of the entanglement potential remains as single-mode nonclassicality in the two entangled output modes. Two-mode entanglement generated in the pr…
▽ More
We study the relation between single-mode nonclassicality and two-mode entanglement in a beam-splitter. We show that not all of the nonclassicality (entanglement potential) is transformed into two-mode entanglement for an incident single-mode light. Some of the entanglement potential remains as single-mode nonclassicality in the two entangled output modes. Two-mode entanglement generated in the process can be equivalently quantified as the increase in the minimum uncertainty widths (or decrease in the squeezing) of the output states compared to the input states. We use the nonclassical depth and logarithmic negativity as single-mode nonclassicality and entanglement measures, respectively. We realize that a conservation relation between the two quantities can be adopted for Gaussian states, if one works in terms of uncertainty width. This conservation relation is extended to many sets of beam-splitters.
△ Less
Submitted 11 September, 2015; v1 submitted 16 June, 2015;
originally announced June 2015.
-
The simulation of loss of U ions due to charge changing processes in the CSRm ring
Authors:
Wenheng Zheng,
Jiancheng Yang,
Peng Li,
Zhongshan Li,
Peng Shang,
Guofeng Qu,
Wenwen Ge,
Meitang Tang,
** Sha
Abstract:
Significant beam loss caused by the charge exchange processes and ions impact induced outgassing play a crucial role in the limitation of the maximum number of accumulated heavy ions during the high intensity operation in the accelerators. With the aim to control beam loss due to charge exchange processes and to confine the generated desorption gas, the tracking of the loss positions and installin…
▽ More
Significant beam loss caused by the charge exchange processes and ions impact induced outgassing play a crucial role in the limitation of the maximum number of accumulated heavy ions during the high intensity operation in the accelerators. With the aim to control beam loss due to charge exchange processes and to confine the generated desorption gas, the tracking of the loss positions and installing the absorber blocks with low-desorption rate material at appropriate locations in the CSRm ring will be taken. The loss simulation of U ions having lost an electron will be presented in this report and the calculation of the collimation efficiency of the CSRm ring will be continued in the future.
△ Less
Submitted 2 September, 2014;
originally announced September 2014.
-
Lattice Boltzmann based discrete simulation for gas-solid fluidization
Authors:
Limin Wang,
Bo Zhang,
Xiaowei Wang,
Wei Ge,
**ghai Li
Abstract:
Discrete particle simulation, a combined approach of computational fluid dynamics and discrete methods such as DEM (Discrete Element Method), DSMC (Direct Simulation Monte Carlo), SPH (Smoothed Particle Hydrodynamics), PIC (Particle-In-Cell), etc., is becoming a practical tool for exploring lab-scale gas-solid systems owing to the fast development of parallel computation. However, gas-solid coupli…
▽ More
Discrete particle simulation, a combined approach of computational fluid dynamics and discrete methods such as DEM (Discrete Element Method), DSMC (Direct Simulation Monte Carlo), SPH (Smoothed Particle Hydrodynamics), PIC (Particle-In-Cell), etc., is becoming a practical tool for exploring lab-scale gas-solid systems owing to the fast development of parallel computation. However, gas-solid coupling and the corresponding fluid flow solver remain immature. In this work, we propose a modified lattice Boltzmann approach to consider the effect of both the local solid volume fraction and the local relative velocity between particles and fluid, which is different from the traditional volume-averaged Navier-Stokes equations. A time-driven hard sphere algorithm is combined to simulate the motion of individual particles, in which particles interact with each other via hard-sphere collisions, the collision detection and motion of particles are performed at constant time intervals. The EMMS (energy minimization multi-scale) drag is coupled with the lattice Boltzmann based discrete particle simulation to improve the accuracy. Two typical fluidization processes, namely, a single bubble injection at incipient fluidization and particle clustering in a fast fluidized bed riser, are simulated with this approach, with the results showing a good agreement with published correlations and experimental data. The capability of the approach to capture more detailed and intrinsic characteristics of particle-fluid systems is demonstrated. The method can also be used straightforward with other solid phase solvers.
△ Less
Submitted 18 June, 2013; v1 submitted 11 March, 2013;
originally announced March 2013.
-
Large-Scale DNS of Gas-Solid Flow on Mole-8.5
Authors:
Qingang Xiong,
Guofeng Zhou,
Bo Li,
Ji Xua,
Xiaojian Fang,
Junwu Wang,
Xianfeng He,
Xiaowei Wang,
Limin Wang,
Wei Ge,
**ghai Li
Abstract:
Direct numerical simulation (DNS) for gas-solid flow is implemented on a multi-scale supercomputing system, Mole-8.5, featuring massive parallel GPU-CPU hybrid computing, for which the lattice Boltzmann method (LBM) is deployed together with the immersed moving boundary (IMB) method and discrete element method (DEM). A two-dimensional suspension with about 1,166,400 75-micron solid particles distr…
▽ More
Direct numerical simulation (DNS) for gas-solid flow is implemented on a multi-scale supercomputing system, Mole-8.5, featuring massive parallel GPU-CPU hybrid computing, for which the lattice Boltzmann method (LBM) is deployed together with the immersed moving boundary (IMB) method and discrete element method (DEM). A two-dimensional suspension with about 1,166,400 75-micron solid particles distributed in an area of 11.5cm x46cm, and a three-dimensional suspension with 129,024 solid particles in a domain of 0.384cm x1.512cm x0.384cm are fully-resolved below particle scale and distinct multi-scale heterogeneity are observed. Almost 20-fold speedup is achieved on one Nvidia C2050 GPU over one core of Intel E5520 CPU in double precision, and nearly ideal scalability is maintained when using up to 672 GPUs. The simulations demonstrate that LB-IMB-DEM modeling with parallel GPU computing may suggest a promising approach for exploring the fundamental mechanisms and constitutive laws of complex gas-solid flow, which are, so far, poorly understood in both experiments and theoretical studies.
△ Less
Submitted 11 November, 2010;
originally announced November 2010.
-
Molecular Dynamics Simulation of Macromolecules Using Graphics Processing Unit
Authors:
Ji Xu,
Ying Ren,
Wei Ge,
Xiang Yu,
Xiaozhen Yang,
**ghai Li
Abstract:
Molecular dynamics (MD) simulation is a powerful computational tool to study the behavior of macromolecular systems. But many simulations of this field are limited in spatial or temporal scale by the available computational resource. In recent years, graphics processing unit (GPU) provides unprecedented computational power for scientific applications. Many MD algorithms suit with the multithread…
▽ More
Molecular dynamics (MD) simulation is a powerful computational tool to study the behavior of macromolecular systems. But many simulations of this field are limited in spatial or temporal scale by the available computational resource. In recent years, graphics processing unit (GPU) provides unprecedented computational power for scientific applications. Many MD algorithms suit with the multithread nature of GPU. In this paper, MD algorithms for macromolecular systems that run entirely on GPU are presented. Compared to the MD simulation with free software GROMACS on a single CPU core, our codes achieve about 10 times speed-up on a single GPU. For validation, we have performed MD simulations of polymer crystallization on GPU, and the results observed perfectly agree with computations on CPU. Therefore, our single GPU codes have already provided an inexpensive alternative for macromolecular simulations on traditional CPU clusters and they can also be used as a basis to develop parallel GPU programs to further speedup the computations.
△ Less
Submitted 21 January, 2010;
originally announced January 2010.
-
Meso-scale phenomena from compromise -- a common challenge, not only for chemical engineering
Authors:
**ghai Li,
Wei Ge,
Mooson Kwauk
Abstract:
This short communication analyzes the importance of resolving meso-scale structure in a complex system with multi-scale structure. Similar mechanisms for the formation of meso-scale structures in different systems are found and a general approach to established multi-scale models for such systems is discussed.
This short communication analyzes the importance of resolving meso-scale structure in a complex system with multi-scale structure. Similar mechanisms for the formation of meso-scale structures in different systems are found and a general approach to established multi-scale models for such systems is discussed.
△ Less
Submitted 7 December, 2010; v1 submitted 29 December, 2009;
originally announced December 2009.
