-
Generation of electro-optic frequency combs with optimized flatness in a silicon ring resonator modulator
Authors:
Erwan Weckenmann,
Thyago Monteiro,
Uiara Celine de Moura,
Francesco Da Ros,
Laurent Bramerie,
Mathilde Gay,
Diego Pérez-Galacho,
Lucas Deniel,
Frédéric Boeuf,
Delphine Marris-Morini,
Darko Zibar,
Christophe Peucheret
Abstract:
The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating…
▽ More
The flatness of electro-optic frequency combs (EOFCs) generated in a single silicon ring resonator modulator (RRM) is optimized by employing harmonic superposition of the radio-frequency driving signal. A differential evolution algorithm is employed in conjunction with a simplified model of the RRM for offline optimization of the amplitudes and phases of harmonic driving signals and the operating point of the RRM. The optimized driving signals are then applied to a silicon RRM. EOFCs containing 7 and 9 lines are synthesized with a power imbalance between the lines of 2.9 dB and 5.4 dB, respectively, compared to 9.4 dB for an optimized 5-line comb generated from a single sinusoidal driving signal.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Narrow Linewidth near-UV InGaN Laser Diode based on External Cavity Fiber Bragg Grating
Authors:
Antoine Congar,
Mathilde Gay,
Georges Perin,
Dominique Mammez,
Jean-Claude Simon,
Pascal Besnard,
Julien Rouvillain,
Thierry Georges,
Laurent Lablonde,
Thierry Robin,
Stéphane Trebaol
Abstract:
We realize a fiber Bragg grating InGaN based laser diode emitting at 400 nm and demonstrate its high coherency. Thanks to the fabrication of a narrow band fiber Bragg grating in the near-UV, we can reach single-mode and single-frequency regimes for the self-injection locked diode. The device exhibits 44 dB side-mode-suppression-ratio and mW output power. Detailed frequency noise analysis reveals s…
▽ More
We realize a fiber Bragg grating InGaN based laser diode emitting at 400 nm and demonstrate its high coherency. Thanks to the fabrication of a narrow band fiber Bragg grating in the near-UV, we can reach single-mode and single-frequency regimes for the self-injection locked diode. The device exhibits 44 dB side-mode-suppression-ratio and mW output power. Detailed frequency noise analysis reveals sub-MHz integrated linewidth and 16 kHz intrinsic linewidth. Such a narrow linewidth laser diode in the near-UV domain with a compact and low-cost design could find applications whenever coherency and interferometric resolutions are needed.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Ultra-low power threshold for laser induced changes in optical properties of 2D Molybdenum dichalcogenides
Authors:
Fabian Cadiz,
Cedric Robert,
Gang Wang,
Wilson Kong,
Xi Fan,
Mark Blei,
Delphine Lagarde,
Maxime Gay,
Marco Manca,
Takashi Taniguchi,
Kenji Watanabe,
Thierry Amand,
Xavier Marie,
Pierre Renucci,
Sefaattin Tongay,
Bernhard Urbaszek
Abstract:
The optical response of traditional semiconductors depends on the laser excitation power used in experiments. For two-dimensional (2D) semiconductors, laser excitation effects are anticipated to be vastly different due to complexity added by their ultimate thinness, high surface to volume ratio, and laser-membrane interaction effects. We show in this article that under laser excitation the optical…
▽ More
The optical response of traditional semiconductors depends on the laser excitation power used in experiments. For two-dimensional (2D) semiconductors, laser excitation effects are anticipated to be vastly different due to complexity added by their ultimate thinness, high surface to volume ratio, and laser-membrane interaction effects. We show in this article that under laser excitation the optical properties of 2D materials undergo irreversible changes. Most surprisingly these effects take place even at low steady state excitation, which is commonly thought to be non-intrusive. In low temperature photoluminescence (PL) we show for monolayer (ML) MoSe2 samples grown by different techniques that laser treatment increases significantly the trion (i.e. charged exciton) contribution to the emission compared to the neutral exciton emission. Comparison between samples exfoliated onto different substrates shows that laser induced do** is more efficient for ML MoSe2 on SiO2/Si compared to h-BN and gold. For ML MoS2 we show that exposure to laser radiation with an average power in the $μ$W/$μ$m$^2$ range does not just increase the trion-to-exciton PL emission ratio, but may result in the irreversible disappearance of the neutral exciton PL emission and a shift of the main PL peak to lower energy.
△ Less
Submitted 30 June, 2016;
originally announced June 2016.
-
SOA - NOLM in Reflective Configuration for Optical Regeneration in High Bit Rate Transmission Systems
Authors:
Vincent Roncin,
Gwenaëlle Girault,
Mathilde Gay,
Laurent Bramerie,
Jean-Claude Simon
Abstract:
This paper presents a theoretical and experimental investigation of optical signal regeneration properties of a non-linear optical loop mirror using a semiconductor optical amplifier as the active element (SOA-NOLM). While this device has been extensively studied for optical time division demultiplexing (OTDM) and wavelength conversion applications, our proposed approach, based on a reflective con…
▽ More
This paper presents a theoretical and experimental investigation of optical signal regeneration properties of a non-linear optical loop mirror using a semiconductor optical amplifier as the active element (SOA-NOLM). While this device has been extensively studied for optical time division demultiplexing (OTDM) and wavelength conversion applications, our proposed approach, based on a reflective configuration, has not yet been investigated, particularly in the light of signal regeneration. The impact on the transfer function shape of different parameters, like SOA position in the interferometer and SOA input optical powers, are numerically studied to appreciate the regenerative capabilities of the device.Regenerative performances in association with a dual stage of SOA to create a 3R regenerator which preserves the data polarity and the wavelength are experimentally assessed. Thanks to this complete regenerative function, a 100.000 km error free transmission has experimentally been achieved at 10 Gb/s in a recirculating loop. The evolution of Bit Error Rate for multiple pass into the regenerator and the polarization insensitivity demonstration to input data are presented.
△ Less
Submitted 12 May, 2014;
originally announced May 2014.
-
Analysis of snowpack properties and structure from TerraSAR-X data, based on multilayer backscattering and snow evolution modeling approaches
Authors:
Xuan-Vu Phan,
Laurent Ferro-Famil,
Michel Gay,
Yves Durand,
Marie Dumont,
Sophie Allain,
Guy D'Urso
Abstract:
Recently launched high precision Synthetic Aperture Radar (SAR) satellites such as TerraSAR-X, COSMO-SkyMed, etc. present a high potential for better observation and characterization of the cryosphere. This study introduces a new approach using high frequency (X-band) SAR data and an Electromagnetic Backscattering Model (EBM) to constrain the detailed snowpack model Crocus. A snowpack EBM based on…
▽ More
Recently launched high precision Synthetic Aperture Radar (SAR) satellites such as TerraSAR-X, COSMO-SkyMed, etc. present a high potential for better observation and characterization of the cryosphere. This study introduces a new approach using high frequency (X-band) SAR data and an Electromagnetic Backscattering Model (EBM) to constrain the detailed snowpack model Crocus. A snowpack EBM based on radiative transfer theory, previously used for C-band applications, is adapted for the X-band. From measured or simulated snowpack stratigraphic profiles consisting of snow optical grain radius and density, this forward model calculates the backscattering coefficient for different polarimetric channels. The output result is then compared with spaceborne TerraSAR-X acquisitions to evaluate the forward model. Next, from the EBM, the adjoint operator is developed and used in a variational analysis scheme in order to minimize the discrepancies between simulations and SAR observations. A time series of TerraSAR-X acquisitions and in-situ measurements on the Argentière glacier (Mont-Blanc massif, French Alps) are used to evaluate the EBM and the data assimilation scheme. Results indicate that snow stratigraphic profiles obtained after the analysis process show a closer agreement with the measured ones than the initial ones, and therefore demonstrate the high potential of assimilating SAR data to model of snow evolution.
△ Less
Submitted 14 November, 2012;
originally announced November 2012.
