-
An Introduction to Computational Fluctuating Hydrodynamics
Authors:
Alejandro L. Garcia,
John B. Bell,
Andrew Nonaka,
Ishan Srivastava,
Daniel Ladiges,
Changho Kim
Abstract:
These notes are an introduction to fluctuating hydrodynamics (FHD) and the formulation of numerical schemes for the resulting stochastic partial differential equations (PDEs). Fluctuating hydrodynamics was originally introduced by Landau and Lifshitz as a way to put thermal fluctuations into a continuum framework by including a stochastic forcing to each dissipative transport process (e.g., heat f…
▽ More
These notes are an introduction to fluctuating hydrodynamics (FHD) and the formulation of numerical schemes for the resulting stochastic partial differential equations (PDEs). Fluctuating hydrodynamics was originally introduced by Landau and Lifshitz as a way to put thermal fluctuations into a continuum framework by including a stochastic forcing to each dissipative transport process (e.g., heat flux). While FHD has been useful in modeling transport and fluid dynamics at the mesoscopic scale, theoretical calculations have been feasible only with simplifying assumptions. As such there is great interest in numerical schemes for Computational Fluctuating Hydrodynamics (CFHD). There are a variety of algorithms (e.g., spectral, finite element, lattice Boltzmann) but in this introduction we focus on finite volume schemes. Accompanying these notes is a demonstration program in Python available on GitHub.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise,
C. Bellenghi
, et al. (399 additional authors not shown)
Abstract:
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities…
▽ More
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests.
△ Less
Submitted 20 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
New bounds on heavy axions with an X-ray free electron laser
Authors:
Jack W. D. Halliday,
Giacomo Marocco,
Konstantin A. Beyer,
Charles Heaton,
Motoaki Nakatsutsumi,
Thomas R. Preston,
Charles D. Arrowsmith,
Carsten Baehtz,
Sebastian Goede,
Oliver Humphries,
Alejandro Laso Garcia,
Richard Plackett,
Pontus Svensson,
Georgios Vacalis,
Justin Wark,
Daniel Wood,
Ulf Zastrau,
Robert Bingham,
Ian Shipsey,
Subir Sarkar,
Gianluca Gregori
Abstract:
We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While…
▽ More
We present new exclusion bounds obtained at the European X-ray Free Electron Laser facility (EuXFEL) on axion-like particles (ALPs) in the mass range 10^{-3} eV < m_a < 10^{4} eV. Our experiment exploits the Primakoff effect via which photons can, in the presence of a strong external electric field, decay into axions, which then convert back into photons after passing through an opaque wall. While similar searches have been performed previously at a 3^rd generation synchrotron [1], our work demonstrates improved sensitivity, exploiting the higher brightness of X-rays at EuXFEL.
△ Less
Submitted 6 July, 2024; v1 submitted 26 April, 2024;
originally announced April 2024.
-
Using Micromegas detectors for direct dark matter searches: challenges and perspectives
Authors:
K. Altenmueller,
. Antolin,
D. Calvet,
F. R. Candon,
J. Castel,
S. Cebrian,
C. Cogollos,
T. Dafni,
D. Diez Ibanez,
E. Ferrer-Ribas,
J. Galan,
J. A. Garcia,
H. Gomez,
Y. Gu,
A. Ezquerro,
I. G Irastorza,
G. Luzon,
C. Margalejo,
H. Mirallas,
L. Obis,
A. Ortiz de Solorzano,
T. Papaevangelou,
O. Perez,
E. Picatoste,
J. Porron
, et al. (5 additional authors not shown)
Abstract:
Gas time projection chambers (TPCs) with Micromegas pixelated readouts are being used in dark matter searches and other rare event searches, due to their potential in terms of low background levels, energy and spatial resolution, gain, and operational stability. Moreover, these detectors can provide precious features,such as topological information, allowing for event directionality and powerful s…
▽ More
Gas time projection chambers (TPCs) with Micromegas pixelated readouts are being used in dark matter searches and other rare event searches, due to their potential in terms of low background levels, energy and spatial resolution, gain, and operational stability. Moreover, these detectors can provide precious features,such as topological information, allowing for event directionality and powerful signal-background discrimination. The Micromegas technology of the microbulk type is particularly suited to low-background applications and is being exploited by detectors for CAST and IAXO (solar axions) and TREX-DM (low-mass WIMPs) experiments. Challenges for the future include reducing intrinsic background levels, reaching lower energy detection levels, and technical issues such as robustness of detector, new design choices, novel gas mixtures and operation points, scaling up to larger detector sizes, handling large readout granularity, etc. We report on the status and prospects of the development ongoing in the context of IAXO and TREX-DM experiments, pointing to promising perspectives for the use of Micromegas detectors in directdark matter searches
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Comment on "Brownian motion of droplets induced by thermal noise"
Authors:
J. B. Bell,
A. Nonaka,
A. L. Garcia
Abstract:
We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. (Phys. Rev. E 109 024208 (2024))…
▽ More
We simulate phase separated fluids using the Cahn-Hillard fluctuating hydrodynamic (CH-FHD) model and measure the statistical properties of capillary waves generated by thermal fluctuations. Our measurements are in good agreement with stochastic lubrication theory and molecular dynamics simulations but differ significantly from recent CH-FHD results by Zhang et al. (Phys. Rev. E 109 024208 (2024)). Specifically, we find that capillary wave statistics at thermodynamic equilibrium are independent of transport properties, namely viscosity and species diffusion.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Background discrimination with a Micromegas detector prototype and veto system for BabyIAXO
Authors:
K. Altenmüller,
J. F. Castel,
S. Cebrián,
T. Dafni,
D. Díez-Ibañez,
A. Ezquerro,
E. Ferrer-Ribas,
J. Galan,
J. Galindo,
J. A. García,
A. Giganon,
C. Goblin,
I. G. Irastorza,
C. Loiseau,
G. Luzón,
X. F. Navick,
C. Margalejo,
H. Mirallas,
L. Obis,
A. Ortiz de Solórzano,
T. Papaevangelou,
O. Pérez,
A. Quintana,
J. Ruz,
J. K. Vogel
Abstract:
In this paper we present measurements performed with a Micromegas X-ray detector setup. The detector is a prototype in the context of the BabyIAXO helioscope, which is under construction to search for an emission of the hypothetical axion particle from the sun. An important component of such a helioscope is a low background X-ray detector with a high efficiency in the 1-10 keV energy range. The go…
▽ More
In this paper we present measurements performed with a Micromegas X-ray detector setup. The detector is a prototype in the context of the BabyIAXO helioscope, which is under construction to search for an emission of the hypothetical axion particle from the sun. An important component of such a helioscope is a low background X-ray detector with a high efficiency in the 1-10 keV energy range. The goal of the measurement was to study techniques for background discrimination. In addition to common techniques we used a multi-layer veto system designed to tag cosmogenic neutron background. Over an effective time of 52 days, a background level of $8.6 \times 10^{-7}\,\text{counts keV}^{-1}\,\text{cm}^{-2} \, \text{s}^{-1}$ was reached in a laboratory at above ground level. This is the lowest background level achieved at surface level. In this paper we present the experimental setup, show simulations of the neutron-induced background, and demonstrate the process to identify background signals in the data. Finally, prospects to reach lower background levels down to $10^{-7} \, \text{counts keV}^{-1} \, \text{cm}^{-2} \, \text{s}^{-1}$ will be discussed.
△ Less
Submitted 10 March, 2024;
originally announced March 2024.
-
Improved modeling of in-ice particle showers for IceCube event reconstruction
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise
, et al. (394 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr…
▽ More
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed.
△ Less
Submitted 22 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser
Authors:
Alejandro Laso Garcia,
Long Yang,
Victorien Bouffetier,
Karen Apple,
Carsten Baehtz,
Johannes Hagemann,
Hauke Höppner,
Oliver Humphries,
Mikhail Mishchenko,
Motoaki Nakatsutsumi,
Alexander Pelka,
Thomas R. Preston,
Lisa Randolph,
Ulf Zastrau,
Thomas E. Cowan,
Lingen Huang,
Toma Toncian
Abstract:
Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition ra…
▽ More
Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
Crustal velocity and strain rate fields in the Balearic Islands based on continuous GPS time series from the XGAIB network (2010-2013)
Authors:
A. Sánchez Alzola,
C. Sánchez,
J. Giménez,
P. Alfaro García,
B. Gelabert,
M. J. Borque-Arancón,
A. J. Gil
Abstract:
In this paper, we present a first estimation, using the GIPSY-OASIS software, of the crustal velocity and strain rate fields in the Balearic Islands (Spain), based on continuous GPS observations from the XGAIB network spanning the period 2010-2013. The XGAIB network consists of nine permanent, widely distributed stations that have operated continuously since 2010. In this paper, we describe the XG…
▽ More
In this paper, we present a first estimation, using the GIPSY-OASIS software, of the crustal velocity and strain rate fields in the Balearic Islands (Spain), based on continuous GPS observations from the XGAIB network spanning the period 2010-2013. The XGAIB network consists of nine permanent, widely distributed stations that have operated continuously since 2010. In this paper, we describe the XGAIB network and the CGPS data processing and present our principle results in terms of the position time series and velocities of all of the sites, which were observed for more than three and a half years. In addition, strain tensors were estimated from the velocity field to obtain the first realistic crustal deformation model of the archipelago. The strains exhibit gradual variation across the Balearic Islands, from WNW-ESE extension in the southwest (Ibiza and Formentera) to NW-SE compression in the northeast (Menorca). These results constitute an advance in our knowledge of the tectonics of the western Mediterranean region.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Return level estimations for extreme rainfall over the Iberian Peninsula: comparing methodologies
Authors:
F. J. Acero,
S. Parey,
J. A. García,
D. Dacunha-Castelle
Abstract:
Different ways to estimate future return levels for extreme rainfall are described and applied to the Iberian Peninsula (IP), based on Extreme Value Theory (EVT). This study is made for an ensemble of high quality rainfall time series observed in the Iberian Peninsula over the period 1961-2010. Both, peaks-over-threshold (POT) approach and block maxima with the Generalized Extreme Value (GEV) dist…
▽ More
Different ways to estimate future return levels for extreme rainfall are described and applied to the Iberian Peninsula (IP), based on Extreme Value Theory (EVT). This study is made for an ensemble of high quality rainfall time series observed in the Iberian Peninsula over the period 1961-2010. Both, peaks-over-threshold (POT) approach and block maxima with the Generalized Extreme Value (GEV) distribution will be used and their results compared when linear trends are assumed in the parameters: threshold and scale parameter for POT and location and scale parameter for GEV. Both all-days and rainy-days-only data sets were considered, because rainfall over the IP is a special variable in that a large number of the values are 0. Another methodology is then tested, for rainy days only, considering the role of how the mean, variance, and number of rainy days evolve. The 20-year return levels (RLs) expected in 2020 were estimated using these methodologies for three seasons: fall, spring and winter. GEV is less reliable than POT because fixed blocks lead to the selection of non-extreme values. Future RLs obtained with POT are higher than those estimated with GEV, mainly for some gauges showing significant positive trend for the number of rainy days. Fall becomes the season with heaviest rainfall, rather than winter nowadays, for some regions.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Changes in heat waves characteristics over Extremadura (SW Spain)
Authors:
F. J. Acero,
M. I. Fernández-Fernández,
V. M. S. Carrasco,
S. Parey,
T. T. Huong Hoang,
D. Dacunha-Castelle,
J. A. García
Abstract:
Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human population in health terms, but also on biodiversity and agriculture. This motivated a study of the trends in HW events over Extremadura, a region in the southwest of Spain, with much of its area in summer devoted to the production of irrigated…
▽ More
Heat wave (HW) events are becoming more frequent, and they have important consequences because of the negative effects they can have not only on the human population in health terms, but also on biodiversity and agriculture. This motivated a study of the trends in HW events over Extremadura, a region in the southwest of Spain, with much of its area in summer devoted to the production of irrigated crops such as maize and tomatoes. Heat waves were defined for the study as two consecutive days with temperatures above the 95th percentile of the summer (June-August) maximum temperature (Tmax) time series. Two datasets were used: one consisted of 13 daily temperature records uniformly distributed over the Region, and the other was the SPAIN02 gridded observational dataset, extracting just the points corresponding to Extremadura. The trends studied were in the duration, intensity, and frequency of HW events, and in other parameters such as the mean, low (25th percentile), and high (75th percentile) values. In general terms, the results showed significant positive trends in those parameters over the east, the northwest, and a small area in the south of the Region. In order to study changes in HW characteristics (duration, frequency and intensity) considering different subperiods, a stochastic model was used to generate 1000 time series equivalent to the observed ones. The results showed that there were no significant changes in HW duration in the last 10-year subperiod in comparison with the first. But the results were different for warm events (WE), defined with a lower threshold (the 75th percentile), which are also important for agriculture. For several sites, there were significant changes in WE duration, frequency, and intensity.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
A limit for the values of the Dst geomagnetic index
Authors:
F. J. Acero,
J. M. Vaquero,
M. C. Gallego,
J. A. García
Abstract:
The study of the extreme weather space events is important for a technological dependent society. Extreme Value Theory could be decisive to characterize those extreme events in order to have the knowledge to make decisions in technological, economic and social matters, in all fields with possible impacts. In this work, the hourly values of the Dst geomagnetic index has been studied for the period…
▽ More
The study of the extreme weather space events is important for a technological dependent society. Extreme Value Theory could be decisive to characterize those extreme events in order to have the knowledge to make decisions in technological, economic and social matters, in all fields with possible impacts. In this work, the hourly values of the Dst geomagnetic index has been studied for the period 1957-2014 using the peaks-over-threshold technique. The shape parameter obtained from the fit of the generalized Pareto distribution to the extreme values of the |Dst| index leads to a negative value implying an upper bound for this time series. This result is relevant, because the estimation of this limit for the extreme values lead to 850 nT as the highest expected value for this geomagnetic index. Thus, from the previous characterization of the Carrington geomagnetic storm and our results, it could be considered the worst case scenario.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Structural and optical properties of self-assembled AlN nanowires grown on SiO2/Si substrates by molecular beam epitaxy
Authors:
Ž. Gačević,
J. Grandal,
Q. Guo,
R. Kirste,
M. Varela,
Z. Sitar,
M. A. Sánchez García
Abstract:
Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we show that the NWs grow nearly strain free, preferentially perpendicular to the amorphous SiO2 interlayer and without epitaxial relationship to Si(111) substrat…
▽ More
Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we show that the NWs grow nearly strain free, preferentially perpendicular to the amorphous SiO2 interlayer and without epitaxial relationship to Si(111) substrate, as expected. Scanning electron microscopy investigation reveals significant NWs coalescence, which results in their progressively increasing diameter and formation of columnar structures with non hexagonal cross section. Making use of scanning transmission electron microscopy (STEM), the NWs initial diameters are found in the 20 to 30 nm range. In addition, the formation of a thin (30 nm) polycrystalline AlN layer is observed on the substrate surface. Regarding the structural quality of the AlN NWs, STEM measurements reveal the formation of extended columnar regions, which grow with a virtually perfect metal-polarity wurtzite arrangement and with extended defects only sporadically observed. Combination of STEM and electron energy loss spectroscopy (EELS) reveals the formation of continuous aluminum oxide (1 to 2 nm) on the NW surface. Low temperature photoluminescence measurements reveal a single near band edge (NBE) emission peak, positioned at 6.03 eV (at 2 K), a value consistent with nearly zero NW strain evidenced by XRD and in agreement with the values obtained on AlN bulk layers synthesized by other growth techniques. The significant full width at half maximum of NBE emission, found at 20 meV (at 2 K), suggests that free and bound excitons are mixed together within this single emission band.
△ Less
Submitted 31 January, 2024;
originally announced February 2024.
-
Cheetah: Bridging the Gap Between Machine Learning and Particle Accelerator Physics with High-Speed, Differentiable Simulations
Authors:
Jan Kaiser,
Chenran Xu,
Annika Eichler,
Andrea Santamaria Garcia
Abstract:
Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorc…
▽ More
Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorch-based high-speed differentiable linear-beam dynamics code. Cheetah enables the fast collection of large data sets by reducing computation times by multiple orders of magnitude and facilitates efficient gradient-based optimisation for accelerator tuning and system identification. This positions Cheetah as a user-friendly, readily extensible tool that integrates seamlessly with widely adopted machine learning tools. We showcase the utility of Cheetah through five examples, including reinforcement learning training, gradient-based beamline tuning, gradient-based system identification, physics-informed Bayesian optimisation priors, and modular neural network surrogate modelling of space charge effects. The use of such a high-speed differentiable simulation code will simplify the development of machine learning-based methods for particle accelerators and fast-track their integration into everyday operations of accelerator facilities.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Searching for WIMPs with TREX-DM: achievements and challenges
Authors:
Juan F. Castel,
Susana Cebrián,
Theopisti Dafni,
David Díez-Ibáñez,
Álvaro Ezquerro,
Javier Galán,
Juan Antonio García,
Igor G. Irastorza,
María Jiménez,
Gloria Luzón,
Cristina Margalejo,
Ángel de Mira,
Hector Mirallas,
Luis Obis,
Alfonso Ortiz de Solórzano,
Oscar Pérez,
Jaime Ruz,
Julia Vogel
Abstract:
The TREX-DM detector, a low background chamber with microbulk Micromegas readout, was commissioned in the underground laboratory of Canfranc (LSC) in 2018. Since then, data taking campaigns have been carried out with Argon and Neon mixtures, at different pressures from 1 to 4 bar. By achieving a low energy threshold of 1 keV$_{ee}$ and a background level of 80 counts keV$^{-1}$ Kg$^{-1}$ day…
▽ More
The TREX-DM detector, a low background chamber with microbulk Micromegas readout, was commissioned in the underground laboratory of Canfranc (LSC) in 2018. Since then, data taking campaigns have been carried out with Argon and Neon mixtures, at different pressures from 1 to 4 bar. By achieving a low energy threshold of 1 keV$_{ee}$ and a background level of 80 counts keV$^{-1}$ Kg$^{-1}$ day$^{-1}$ in the region from 1 to 7 keV$_{ee}$, the experiment demonstrates its potential to search for low-mass WIMPs. Two of the most important challenges currently faced are the reduction of both, background level and energy threshold. With respect to the energy threshold, recently a new readout plane is being developed, based on the combination of Micromegas and GEM technologies, aiming to have a pre-amplification stage that would permit very low energy thresholds, close to the single-electron ionization energy. With respect to the background reduction, apart from studies to identify and minimize contamination population, a high sensitivity alpha detector is being developed in order to allow a proper material selection for the TREX-DM detector components. Both challenges, together with the optimization of the gas mixture used as target for the WIMP detection, will take TREX-DM to explore regions of WIMP's mass below 1 GeV c$^{-2}$.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Simulations of Thin Polymer Films on Flat and Curved Substrates
Authors:
Gabriel Catalini,
Nicolás A. García,
Daniel A. Vega,
Arash Nikoubashman
Abstract:
We report molecular dynamics simulation results on the equilibrium properties of polymer thin films adsorbed onto flat and curved substrates. We first systematically determine the contact angle of polymer droplets on flat substrates as a function of the substrate-monomer adsorption strength and degree of polymerization. Focussing on the fully wetted regime, we then investigate the effect of the su…
▽ More
We report molecular dynamics simulation results on the equilibrium properties of polymer thin films adsorbed onto flat and curved substrates. We first systematically determine the contact angle of polymer droplets on flat substrates as a function of the substrate-monomer adsorption strength and degree of polymerization. Focussing on the fully wetted regime, we then investigate the effect of the substrate's topography on the polymer film configuration by using substrates with varying mean curvature. We find that polymer chains close to the substrate are significantly stretched (compressed) in regions of high negative (positive) mean curvature. Further, we find partial dewetting near regions of high mean curvature for thin polymer films. For thicker films, the polymers fully cover the substrate and the shape of the liquid-vapor interface largely follows the shape of the substrate. As the film thickness is increased further, the liquid-vapor interface becomes completely flat. These simulation results are corroborated by analytic calculations using a simplified continuum model that treats the adsorbed polymers as an incompressible medium. Our findings show how the substrate topography influences the conformation of individual chains as well as the shape of the entire film.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Bayesian Optimization Algorithms for Accelerator Physics
Authors:
Ryan Roussel,
Auralee L. Edelen,
Tobias Boltz,
Dylan Kennedy,
Zhe Zhang,
Fuhao Ji,
Xiaobiao Huang,
Daniel Ratner,
Andrea Santamaria Garcia,
Chenran Xu,
Jan Kaiser,
Angel Ferran Pousa,
Annika Eichler,
Jannis O. Lubsen,
Natalie M. Isenberg,
Yuan Gao,
Nikita Kuklev,
Jose Martinez,
Brahim Mustapha,
Verena Kain,
Weijian Lin,
Simone Maria Liuzzo,
Jason St. John,
Matthew J. V. Streeter,
Remi Lehe
, et al. (1 additional authors not shown)
Abstract:
Accelerator physics relies on numerical algorithms to solve optimization problems in online accelerator control and tasks such as experimental design and model calibration in simulations. The effectiveness of optimization algorithms in discovering ideal solutions for complex challenges with limited resources often determines the problem complexity these methods can address. The accelerator physics…
▽ More
Accelerator physics relies on numerical algorithms to solve optimization problems in online accelerator control and tasks such as experimental design and model calibration in simulations. The effectiveness of optimization algorithms in discovering ideal solutions for complex challenges with limited resources often determines the problem complexity these methods can address. The accelerator physics community has recognized the advantages of Bayesian optimization algorithms, which leverage statistical surrogate models of objective functions to effectively address complex optimization challenges, especially in the presence of noise during accelerator operation and in resource-intensive physics simulations. In this review article, we offer a conceptual overview of applying Bayesian optimization techniques towards solving optimization problems in accelerator physics. We begin by providing a straightforward explanation of the essential components that make up Bayesian optimization techniques. We then give an overview of current and previous work applying and modifying these techniques to solve accelerator physics challenges. Finally, we explore practical implementation strategies for Bayesian optimization algorithms to maximize their performance, enabling users to effectively address complex optimization challenges in real-time beam control and accelerator design.
△ Less
Submitted 5 April, 2024; v1 submitted 9 December, 2023;
originally announced December 2023.
-
Post-fabrication tuning of circular Bragg resonators for enhanced emitter-cavity coupling
Authors:
Tobias M. Krieger,
Christian Weidinger,
Thomas Oberleitner,
Gabriel Undeutsch,
Michele B. Rota,
Naser Tajik,
Maximilian Aigner,
Quirin Buchinger,
Christian Schimpf,
Ailton J. Garcia Jr.,
Saimon F. Covre da Silva,
Sven Höfling,
Tobias Huber-Loyola,
Rinaldo Trotta,
Armando Rastelli
Abstract:
Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum states of light with high brightness and low multi-photon probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial…
▽ More
Solid-state quantum emitters embedded in circular Bragg resonators are attractive due to their ability to emit quantum states of light with high brightness and low multi-photon probability. As for any emitter-microcavity system, fabrication imperfections limit the spatial and spectral overlap of the emitter with the cavity mode, thus limiting their coupling strength. Here, we show that an initial spectral mismatch can be corrected after device fabrication by repeated wet chemical etching steps. We demonstrate ~16 nm wavelength tuning for optical modes in AlGaAs resonators on oxide, leading to a 4-fold Purcell enhancement of the emission of single embedded GaAs quantum dots. Numerical calculations reproduce the observations and suggest that the achievable performance of the resonator is only marginally affected in the explored tuning range. We expect the method to be applicable also to circular Bragg resonators based on other material platforms, thus increasing the device yield of cavity-enhanced solid-state quantum emitters.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Reply to "Comment on `Validity of path thermodynamic description of reactive systems: Microscopic simulations'
Authors:
F. Baras,
A. L. Garcia,
M. Malek Mansour
Abstract:
The Comment's author argues that a correct description of reactive systems should incorporate the explicit interaction with reservoirs, leading to a unified system-reservoirs entity. However, this proposition has two major flaws. Firstly, as we will emphasize, this entity inherently follows a thermodynamic equilibrium distribution. In the Comment, no indication is provided on how to maintain such…
▽ More
The Comment's author argues that a correct description of reactive systems should incorporate the explicit interaction with reservoirs, leading to a unified system-reservoirs entity. However, this proposition has two major flaws. Firstly, as we will emphasize, this entity inherently follows a thermodynamic equilibrium distribution. In the Comment, no indication is provided on how to maintain such a system-reservoirs entity in a non-equilibrium state. Secondly, contrary to the author's claim, the inclusion of system-reservoir interaction in traditional stochastic modeling of reactive systems does not automatically alter the limited applicability of path thermodynamics to problematic reactive systems. We will provide a simple demonstration to illustrate that certain elementary reactions may not involve any changes in reservoir components, which seems to have been overlooked by the author.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Probing Earth's Missing Potassium using the Unique Antimatter Signature of Geoneutrinos
Authors:
LiquidO Consortium,
:,
A. Cabrera,
M. Chen,
F. Mantovani,
A. Serafini,
V. Strati,
J. Apilluelo,
L. Asquith,
J. L. Beney,
T. J. C. Bezerra,
M. Bongrand,
C. Bourgeois,
D. Breton,
M. Briere,
J. Busto,
A. Cadiou,
E. Calvo,
V. Chaumat,
E. Chauveau,
B. J. Cattermole,
P. Chimenti,
C. Delafosse,
H. de Kerret,
S. Dusini
, et al. (55 additional authors not shown)
Abstract:
The formation of the Earth remains an epoch with mysterious puzzles extending to our still incomplete understanding of the planet's potential origin and bulk composition. Direct confirmation of the Earth's internal heat engine was accomplished by the successful observation of geoneutrinos originating from uranium (U) and thorium (Th) progenies, manifestations of the planet's natural radioactivity…
▽ More
The formation of the Earth remains an epoch with mysterious puzzles extending to our still incomplete understanding of the planet's potential origin and bulk composition. Direct confirmation of the Earth's internal heat engine was accomplished by the successful observation of geoneutrinos originating from uranium (U) and thorium (Th) progenies, manifestations of the planet's natural radioactivity dominated by potassium (40K) and the decay chains of uranium (238U) and thorium (232Th). This radiogenic energy output is critical to planetary dynamics and must be accurately measured for a complete understanding of the overall heat budget and thermal history of the Earth. Detecting geoneutrinos remains the only direct probe to do so and constitutes a challenging objective in modern neutrino physics. In particular, the intriguing potassium geoneutrinos have never been observed and thus far have been considered impractical to measure. We propose here a novel approach for potassium geoneutrino detection using the unique antimatter signature of antineutrinos to reduce the otherwise overwhelming backgrounds to observing this rarest signal. The proposed detection framework relies on the innovative LiquidO detection technique to enable positron (e+) identification and antineutrino interactions with ideal isotope targets identified here for the first time. We also provide the complete experimental methodology to yield the first potassium geoneutrino discovery.
△ Less
Submitted 23 August, 2023; v1 submitted 8 August, 2023;
originally announced August 2023.
-
Exploration of Non-Resonant Divertor Features on the Compact Toroidal Hybrid
Authors:
K. A. Garcia,
A. Bader,
H. Frerichs,
G. J. Hartwell,
J. C. Schmitt,
N. Allen,
O. Schmitz
Abstract:
Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes…
▽ More
Non-resonant divertors (NRDs) separate the confined plasma from the surrounding plasma facing components (PFCs). The resulting striking field line intersection pattern on these PFCs is insensitive to plasma equilibrium effects. However, a complex scrape-off layer (SOL), created by chaotic magnetic topology in the plasma edge, connects the core plasma to the PFCs through varying magnetic flux tubes. The Compact Toroidal Hybrid (CTH) serves as a test-bed to study this by scanning across its inductive current. Simulations observe a significant change of the chaotic edge structure and an effective distance between the confined plasma and the instrumented wall targets. The intersection pattern is observed to be a narrow helical band, which we claim is a resilient strike line pattern. However, signatures of finger-like structures, defined as heteroclinic tangles in chaotic domains, within the plasma edge connect the island chains to this resilient pattern. The dominant connection length field lines intersecting the targets are observed via heat flux modelling with EMC3-EIRENE. At low inductive current levels, the excursion of the field lines resembles a limited plasma wall scenario. At high currents, a private flux region is created in the area where the helical strike line pattern splits into two bands. These bands are divertor legs with distinct SOL parallel particle flow channels. The results demonstrate the NRD strike line pattern resiliency within CTH, but also show the underlying chaotic edge structure determining if the configuration is diverted or limited. This work supports future design efforts for a mechanical structure for the NRD.
△ Less
Submitted 24 August, 2023; v1 submitted 20 July, 2023;
originally announced July 2023.
-
The measurement problem and scientific realism
Authors:
Jorge Alberto Manero Orozco,
Juan Alberto Guzman Garcia
Abstract:
Many attempts have been made to characterise and solve the infamous measurement problem of quantum mechanics by advocating, implicitly or explicitly, different realist perspectives. As a result, we are still uncertain where this problem and its corresponding solution are to be located in the realism-antirealism debate. On the basis of a well-known characterisation of scientific realism, this paper…
▽ More
Many attempts have been made to characterise and solve the infamous measurement problem of quantum mechanics by advocating, implicitly or explicitly, different realist perspectives. As a result, we are still uncertain where this problem and its corresponding solution are to be located in the realism-antirealism debate. On the basis of a well-known characterisation of scientific realism, this paper intends to fill this gap by arguing that the quantum description of the processes involved in typical measurements is problematic from a minimal realist point of view, known as semantic realism.
△ Less
Submitted 4 October, 2023; v1 submitted 20 June, 2023;
originally announced June 2023.
-
Above-threshold ionization at laser intensity greater than $10^{20}$ W/cm$^{2}$
Authors:
A. Yandow,
T. N. Ha,
C. Aniculaesei,
H. L. Smith,
C. G. Richmond,
M. M. Spinks,
H. J. Quevedo,
S. Bruce,
M. Darilek,
C. Chang,
D. A. Garcia,
E. Gaul,
M. E. Donovan,
B. M. Hegelich,
T. Ditmire
Abstract:
We present the first experimental observation of above-threshold ionization (ATI) electrons produced by ionization of the neon K-shell in a laser field where intensity exceeds 10$^{20}$ W/cm$^{2}$. An array of plastic scintillating calorimeter detectors was used to measure the high-energy electrons at four angles in the laser forward direction. Coarse energy resolution was obtained using aluminum…
▽ More
We present the first experimental observation of above-threshold ionization (ATI) electrons produced by ionization of the neon K-shell in a laser field where intensity exceeds 10$^{20}$ W/cm$^{2}$. An array of plastic scintillating calorimeter detectors was used to measure the high-energy electrons at four angles in the laser forward direction. Coarse energy resolution was obtained using aluminum filters of several thicknesses to block lower-energy electrons. A threshold intensity around $2 \times 10^{20}$ W/cm$^{2}$ is observed for production of energetic ATI electrons in the laser forward direction, with maximum electron energy exceeding 10 MeV. L-shell electrons with energies < 1.4 MeV are scattered further forward along the laser direction than expected. We present comparisons of the measured total electron energies to the predictions of a Monte Carlo models employing the ADK-PPT ionization model and the Augst barrier suppression ionization model.
△ Less
Submitted 16 June, 2023;
originally announced June 2023.
-
Multi-MeV electrons from above-threshold ionization of the neon K-shell
Authors:
A. Yandow,
T. N. Ha,
C. Aniculaesei,
H. L. Smith,
C. G. Richmond,
M. M. Spinks,
H. J. Quevedo,
S. Bruce,
M. Darilek,
C. Chang,
D. A. Garcia,
E. Gaul,
M. E. Donovan,
B. M. Hegelich,
T. Ditmire
Abstract:
We present measurements of integrated electron energies produced by above-threshold ionization (ATI) of neon in a laser field with intensity exceeding 10$^{20}$ W/cm$^{2}$. We observe electrons with energy exceeding 10 MeV ejected in the laser forward direction above a threshold intensity of $2 \times 10^{20}$ W/cm$^{2}$. We compare to ATI models using both tunneling (ADK-PPT) and barrier suppress…
▽ More
We present measurements of integrated electron energies produced by above-threshold ionization (ATI) of neon in a laser field with intensity exceeding 10$^{20}$ W/cm$^{2}$. We observe electrons with energy exceeding 10 MeV ejected in the laser forward direction above a threshold intensity of $2 \times 10^{20}$ W/cm$^{2}$. We compare to ATI models using both tunneling (ADK-PPT) and barrier suppression ionization and observe the onset of ATI at a higher threshold intensity than predicted by these models.
△ Less
Submitted 16 June, 2023;
originally announced June 2023.
-
Learning to Do or Learning While Doing: Reinforcement Learning and Bayesian Optimisation for Online Continuous Tuning
Authors:
Jan Kaiser,
Chenran Xu,
Annika Eichler,
Andrea Santamaria Garcia,
Oliver Stein,
Erik Bründermann,
Willi Kuropka,
Hannes Dinter,
Frank Mayet,
Thomas Vinatier,
Florian Burkart,
Holger Schlarb
Abstract:
Online tuning of real-world plants is a complex optimisation problem that continues to require manual intervention by experienced human operators. Autonomous tuning is a rapidly expanding field of research, where learning-based methods, such as Reinforcement Learning-trained Optimisation (RLO) and Bayesian optimisation (BO), hold great promise for achieving outstanding plant performance and reduci…
▽ More
Online tuning of real-world plants is a complex optimisation problem that continues to require manual intervention by experienced human operators. Autonomous tuning is a rapidly expanding field of research, where learning-based methods, such as Reinforcement Learning-trained Optimisation (RLO) and Bayesian optimisation (BO), hold great promise for achieving outstanding plant performance and reducing tuning times. Which algorithm to choose in different scenarios, however, remains an open question. Here we present a comparative study using a routine task in a real particle accelerator as an example, showing that RLO generally outperforms BO, but is not always the best choice. Based on the study's results, we provide a clear set of criteria to guide the choice of algorithm for a given tuning task. These can ease the adoption of learning-based autonomous tuning solutions to the operation of complex real-world plants, ultimately improving the availability and pushing the limits of operability of these facilities, thereby enabling scientific and engineering advancements.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
How to verify the precision of density-functional-theory implementations via reproducible and universal workflows
Authors:
Emanuele Bosoni,
Louis Beal,
Marnik Bercx,
Peter Blaha,
Stefan Blügel,
Jens Bröder,
Martin Callsen,
Stefaan Cottenier,
Augustin Degomme,
Vladimir Dikan,
Kristjan Eimre,
Espen Flage-Larsen,
Marco Fornari,
Alberto Garcia,
Luigi Genovese,
Matteo Giantomassi,
Sebastiaan P. Huber,
Henning Janssen,
Georg Kastlunger,
Matthias Krack,
Georg Kresse,
Thomas D. Kühne,
Kurt Lejaeghere,
Georg K. H. Madsen,
Martijn Marsman
, et al. (20 additional authors not shown)
Abstract:
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a firs…
▽ More
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. We discuss here general recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z=1 to 96 and characterizing 10 prototypical cubic compounds for each element: 4 unaries and 6 oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Such effort is facilitated by deploying AiiDA common workflows that perform automatic input parameter selection, provide identical input/output interfaces across codes, and ensure full reproducibility. Finally, we discuss the extent to which the current results for total energies can be reused for different goals (e.g., obtaining formation energies).
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Steric effects in induced-charge electro-osmosis for strong electric fields
Authors:
J. Galen Wang,
Daniel R. Ladiges,
Ishan Srivastava,
Sean P. Carney,
Andy J. Nonaka,
Alejandro L. Garcia,
John B. Bell
Abstract:
We study the role of steric effects on the induced-charge electro-osmosis (ICEO) phenomenon using a recently developed mesoscale fluid model. A hybrid Eulerian-Lagrangian method is used to simulate the dynamics of discrete immersed ions in a thermally fluctuating solvent near a metallic plate embedded in the dielectric interface. We observe that the characteristic velocity scales almost linearly w…
▽ More
We study the role of steric effects on the induced-charge electro-osmosis (ICEO) phenomenon using a recently developed mesoscale fluid model. A hybrid Eulerian-Lagrangian method is used to simulate the dynamics of discrete immersed ions in a thermally fluctuating solvent near a metallic plate embedded in the dielectric interface. We observe that the characteristic velocity scales almost linearly with electric field when the generated $ζ$-potentials exceed the order of the thermal voltage, as opposed to a quadratic scaling predicted by Helmholtz-Smoluchowski equation, although qualitative agreement with experiments and theories is obtained at low electric fields. Our simulations reveal that the steric effects play a crucial role at strong electric fields, which is observed from the aggregation of ions towards the center of the metal plate instead of at the edges, and the overcharging of co-ions to the surface charge near the electric double layer. A comparison to a continuum electrolyte model also highlights significant differences in charge distribution and flow field that are attributed to the steric repulsion between ions.
△ Less
Submitted 18 May, 2023;
originally announced May 2023.
-
Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing
Authors:
IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (383 additional authors not shown)
Abstract:
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai…
▽ More
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties.
△ Less
Submitted 8 August, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Visualizing Plasmons and Ultrafast Kinetic Instabilities in Laser-Driven Solids using X-ray Scattering
Authors:
Paweł Ordyna,
Carsten Bähtz,
Erik Brambrink,
Michael Bussmann,
Alejandro Laso Garcia,
Marco Garten,
Lennart Gaus,
Jörg Grenzer,
Christian Gutt,
Hauke Höppner,
Lingen Huang,
Oliver Humphries,
Brian Edward Marré,
Josefine Metzkes-Ng,
Motoaki Nakatsutsumi,
Özgül Öztürk,
Xiayun Pan,
Franziska Paschke-Brühl,
Alexander Pelka,
Irene Prencipe,
Lisa Randolph,
Hans-Peter Schlenvoigt,
Michal Šmíd,
Radka Stefanikova,
Erik Thiessenhusen
, et al. (5 additional authors not shown)
Abstract:
Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond t…
▽ More
Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Our experiments on laser-driven flat silicon membranes show the development of structure with a dominant scale of $~60\unit{nm}$ in the plane of the laser axis and laser polarization, and $~95\unit{nm}$ in the vertical direction with a growth rate faster than $0.1/\mathrm{fs}$. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced instability development, indicating the excitation of surface plasmons and the growth of a new type of filamentation instability. These findings provide new insight into the ultra-fast instability processes in solids under extreme conditions at the nanometer level with important implications for inertial confinement fusion and laboratory astrophysics.
△ Less
Submitted 22 January, 2024; v1 submitted 21 April, 2023;
originally announced April 2023.
-
Fluctuating Hydrodynamics and the Rayleigh-Plateau Instability
Authors:
Bryn Barker,
John B. Bell,
Alejandro L. Garcia
Abstract:
The Rayleigh-Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to surface energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using pa…
▽ More
The Rayleigh-Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to surface energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using particle-based simulations, such as molecular dynamics, and stochastic partial differential equation based hydrodynamic models, such as stochastic lubrication theory. In this paper we present an incompressible fluctuating hydrodynamics model with a diffuse-interface formulation for binary fluid mixtures designed for the study of stochastic interfacial phenomena. An efficient numerical algorithm is outlined and validated in numerical simulations of stable equilibrium interfaces. We present results from simulations of the Rayleigh-Plateau instability for long cylinders pinching into droplets for Ohnesorge numbers of Oh = 0.5 and 5.0. Both stochastic and perturbed deterministic simulations are analyzed and ensemble results show significant differences in the temporal evolution of the minimum radius near pinching. Short cylinders, with lengths less than their circumference, were also investigated. As previously observed in molecular dynamics simulations, we find that thermal fluctuations cause these to pinch in cases where a perturbed cylinder would be stable deterministically. Finally we show that the fluctuating hydrodynamics model can be applied to study a broader range of surface-tension driven phenomena.
△ Less
Submitted 19 June, 2023; v1 submitted 7 April, 2023;
originally announced April 2023.
-
Ultra low background Micromegas detectors for BabyIAXO solar axion search
Authors:
E. Ferrer-Ribas,
K. Altenmüller,
B. Biasuzzi,
J. F. Castel,
S. Cebrián,
T. Dafni,
K. Desch,
D. Díez-Ibañez,
J. Galán,
J. Galindo,
J. A. García,
A. Giganon,
C. Goblin,
I. G. Irastorza,
J. Kaminski,
G. Luzón,
C. Margalejo,
H. Mirallas,
X. F. Navick,
L. Obis,
A. Ortiz de Solórzano,
J. von Oy,
T. Papaevangelou,
O. Pérez,
E. Picatoste
, et al. (5 additional authors not shown)
Abstract:
The International AXion Observatory (IAXO) is a large scale axion helioscope that will look for axions and axion-like particles produced in the Sun with unprecedented sensitivity. BabyIAXO is an intermediate experimental stage that will be hosted at DESY (Germany) and that will test all IAXO subsystems serving as a prototype for IAXO but at the same time as a fully-fledged helioscope with potentia…
▽ More
The International AXion Observatory (IAXO) is a large scale axion helioscope that will look for axions and axion-like particles produced in the Sun with unprecedented sensitivity. BabyIAXO is an intermediate experimental stage that will be hosted at DESY (Germany) and that will test all IAXO subsystems serving as a prototype for IAXO but at the same time as a fully-fledged helioscope with potential for discovery.
One of the crucial components of the project is the ultra-low background X-ray detectors that will image the X-ray photons produced by axion conversion in the experiment. The baseline detection technology for this purpose are Micromegas (Microbulk) detectors. We will show the quest and the strategy to attain the very challenging levels of background targeted for BabyIAXO that need a multi-approach strategy coming from ground measurements, screening campaigns of components of the detector, underground measurements, background models, in-situ background measurements as well as powerful rejection algorithms. First results from the commissioning of the BabyIAXO prototype will be shown.
△ Less
Submitted 22 May, 2023; v1 submitted 27 March, 2023;
originally announced March 2023.
-
Disentangling superconductor and dielectric microwave losses in sub-micron $\rm Nb$/$\rm TEOS-SiO_2$ interconnects using a multi-mode microstrip resonator
Authors:
Cougar A. T. Garcia,
Nancyjane Bailey,
Chris Kirby,
Joshua A. Strong,
Anna Yu. Herr,
Steven M. Anlage,
Vladimir V. Talanov
Abstract:
Understanding the origins of power loss in superconducting interconnects is essential for the energy efficiency and scalability of superconducting digital logic. At microwave frequencies, power dissipates in both the dielectrics and superconducting wires, and these losses can be of comparable magnitude. A novel method to accurately disentangle such losses by exploiting their frequency dependence u…
▽ More
Understanding the origins of power loss in superconducting interconnects is essential for the energy efficiency and scalability of superconducting digital logic. At microwave frequencies, power dissipates in both the dielectrics and superconducting wires, and these losses can be of comparable magnitude. A novel method to accurately disentangle such losses by exploiting their frequency dependence using a multi-mode transmission line resonator, supported by a geometric factor concept and a 3D superconductor finite element method (FEM) modeling, is described. Using the method we optimized a planarized fabrication process of reciprocal quantum logic (RQL) for the interconnect loss at 4.2 K and GHz frequencies. The interconnects are composed of niobium ($\rm Nb$) insulated by silicon dioxide made with a tetraethyl orthosilicate precursor ($\rm TEOS-SiO_2$). Two process generations use damascene fabrication, and the third one uses Cloisonné fabrication. For all three, $\rm TEOS-SiO_2$ exhibits a dielectric loss tangent $\tan δ= 0.0012 \pm 0.0001$, independent of $\rm Nb$ wire width over $0.25 - 4 \: μm$. The $\rm Nb$ loss varies with both the processing and the wire width. For damascene fabrication, scanning transmission electron microscopy (STEM) and energy dispersive X-ray spectroscopy (EDS) reveal that Nb oxide and Nb grain growth orientation increase the loss above the Bardeen Cooper Schrieffer (BCS) minimum theoretical resistance $R _{BCS}$. For Cloisonné fabrication, the $0.25 \: μm$ wide $\rm Nb$ wires exhibit an intrinsic resistance $R_s = 13 \pm 1.4 \: μΩ$ at 10 GHz, which is below $R_{BCS} \approx 17 \: μΩ$. That is arguably the lowest resistive loss reported for $\rm Nb$.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
The human factor: results of a small-angle scattering data analysis Round Robin
Authors:
Brian R. Pauw,
Glen J. Smales,
Andy S. Anker,
Daniel M. Balazs,
Frederick L. Beyer,
Ralf Bienert,
Wim G. Bouwman,
Ingo Breßler,
Joachim Breternitz,
Erik S Brok,
Gary Bryant,
Andrew J. Clulow,
Erin R. Crater,
Frédéric De Geuser,
Alessandra Del Giudice,
Jérôme Deumer,
Sabrina Disch,
Shankar Dutt,
Kilian Frank,
Emiliano Fratini,
Elliot P. Gilbert,
Marc Benjamin Hahn,
James Hallett,
Max Hohenschutz,
Martin Hollamby
, et al. (24 additional authors not shown)
Abstract:
A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of pop…
▽ More
A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of populations in the dilute dispersions, with half of the population mean entries within 1.5% and half of the population width entries within 40%, respectively. Due to the added complexity of the structure factor, much fewer people submitted answers on the powder datasets. For those that did, half of the entries for the means and widths were within 44% and 86% respectively. This Round Robin experiment highlights several causes for the discrepancies, for which solutions are proposed.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Probing the dynamics of solid density micro-wire targets after ultra-intense laser irradiation using a free-electron laser
Authors:
Thomas Kluge,
Michael Bussmann,
Eric Galtier,
Siegfried Glenzer,
Jörg Grenzer,
Christian Gutt,
Nicholas J. Hartley,
Lingen Huang,
Alejandro Laso Garcia,
Hae Ja Lee,
Emma E. McBride,
Josefine Metzkes-Ng,
Motoaki Nakatsutsumi,
Inhyuk Nam,
Alexander Pelka,
Irene Prencipe,
Lisa Randolph,
Martin Rehwald,
Christian Rödel,
Melanie Rödel,
Toma Toncian,
Long Yang,
Karl Zeil,
Ulrich Schramm,
Thomas E. Cowan
Abstract:
In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this pr…
▽ More
In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this process are consistent with the presence of a sharp, propagating shock front inside the wire, moving at a speed close to the hole boring velocity.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Viscosity measurements of glycerol in a parallel-plate rheometer exposed to atmosphere
Authors:
Jesse T. Ault,
Sangwoo Shin,
Allan Garcia,
Antonio Perazzo,
Howard A. Stone
Abstract:
Glycerol is a hygroscopic fluid that spontaneously absorbs water vapor from the atmosphere. For applications involving glycerol, care must be taken to avoid exposure to humidity, since its viscosity decreases quickly as water is absorbed. We report experimental measurements of the viscosity of glycerol in a parallel-plate rheometer where the outer interface is exposed to atmosphere. The measuremen…
▽ More
Glycerol is a hygroscopic fluid that spontaneously absorbs water vapor from the atmosphere. For applications involving glycerol, care must be taken to avoid exposure to humidity, since its viscosity decreases quickly as water is absorbed. We report experimental measurements of the viscosity of glycerol in a parallel-plate rheometer where the outer interface is exposed to atmosphere. The measurements decrease with time as water is absorbed from the atmosphere and transported throughout the glycerol via diffusion and advection. Measured viscosities drop faster at higher relative humidities, confirming the role of hygroscopicity on the transient viscosities. The rate of viscosity decrease shows a non-monotonic relationship with the rheometer gap height. This behavior is explained by considering the transition from diffusion-dominated transport in the narrow gap regime to the large gap regime where transport is dominated by inertia-driven secondary flows. Numerical simulations of the water absorption and transport confirm this non-monotonic behavior. The experimental viscosity measurements show unexpectedly fast decreases at very small gap heights, violating the parallel-plate, axisymmetric model. We propose that this drop-off may be due to misalignment in the rheometer that becomes non-negligible for small gaps. Theoretical considerations show that secondary flows in a misaligned rheometer dominate the typical secondary inertial flows in parallel-plate rheometers at small gaps. Finally, simulations in a misaligned parallel-plate system demonstrate the same sharp drop-off in viscosity measurements at small gap heights. This modeling can be used to estimate the gap height where misalignment effects dominate the transient glycerol viscosity measurements.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Wave-function-based emulation for nucleon-nucleon scattering in momentum space
Authors:
A. J. Garcia,
C. Drischler,
R. J. Furnstahl,
J. A. Melendez,
Xilin Zhang
Abstract:
Emulators for low-energy nuclear physics can provide fast & accurate predictions of bound-state and scattering observables for applications that require repeated calculations with different parameters, such as Bayesian uncertainty quantification. In this paper, we extend a scattering emulator based on the Kohn variational principle (KVP) to momentum space (including coupled channels) with arbitrar…
▽ More
Emulators for low-energy nuclear physics can provide fast & accurate predictions of bound-state and scattering observables for applications that require repeated calculations with different parameters, such as Bayesian uncertainty quantification. In this paper, we extend a scattering emulator based on the Kohn variational principle (KVP) to momentum space (including coupled channels) with arbitrary boundary conditions, which enable the mitigation of spurious singularities known as Kohn anomalies. We test it on a modern chiral nucleon-nucleon (NN) interaction, including emulation of the coupled channels. We provide comparisons between a Lippmann-Schwinger equation emulator and our KVP momentum-space emulator for a representative set of neutron-proton (np) scattering observables, and also introduce a quasi-spline-based approach for the KVP-based emulator. Our findings show that while there are some trade-offs between accuracy and speed, all three emulators perform well. Self-contained Jupyter notebooks that generate the results and figures in this paper are publicly available.
△ Less
Submitted 12 June, 2023; v1 submitted 12 January, 2023;
originally announced January 2023.
-
BUQEYE Guide to Projection-Based Emulators in Nuclear Physics
Authors:
C. Drischler,
J. A. Melendez,
R. J. Furnstahl,
A. J. Garcia,
Xilin Zhang
Abstract:
The BUQEYE collaboration (Bayesian Uncertainty Quantification: Errors in Your EFT) presents a pedagogical introduction to projection-based, reduced-order emulators for applications in low-energy nuclear physics. The term emulator refers here to a fast surrogate model capable of reliably approximating high-fidelity models. As the general tools employed by these emulators are not yet well-known in t…
▽ More
The BUQEYE collaboration (Bayesian Uncertainty Quantification: Errors in Your EFT) presents a pedagogical introduction to projection-based, reduced-order emulators for applications in low-energy nuclear physics. The term emulator refers here to a fast surrogate model capable of reliably approximating high-fidelity models. As the general tools employed by these emulators are not yet well-known in the nuclear physics community, we discuss variational and Galerkin projection methods, emphasize the benefits of offline-online decompositions, and explore how these concepts lead to emulators for bound and scattering systems that enable fast & accurate calculations using many different model parameter sets. We also point to future extensions and applications of these emulators for nuclear physics, guided by the mature field of model (order) reduction. All examples discussed here and more are available as interactive, open-source Python code so that practitioners can readily adapt projection-based emulators for their own work.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Effect of hydrogen addition on the consumption speed of lean premixed laminar methane flames exposed to combined strain and heat loss
Authors:
Alex M. Garcia,
Sophie Le Bras,
Wolfgang Polifke
Abstract:
This study presents a numerical analysis of the impact of hydrogen addition on the consumption speed of premixed lean methane-air laminar flames exposed to combined strain and heat loss. Equivalence ratios of 0.9, 0.7, and 0.5 with fuel mixture composition ranging from pure methane to pure hydrogen are considered to cover a wide range of conditions in the lean region. The 1-D asymmetric counter-fl…
▽ More
This study presents a numerical analysis of the impact of hydrogen addition on the consumption speed of premixed lean methane-air laminar flames exposed to combined strain and heat loss. Equivalence ratios of 0.9, 0.7, and 0.5 with fuel mixture composition ranging from pure methane to pure hydrogen are considered to cover a wide range of conditions in the lean region. The 1-D asymmetric counter-flow premixed laminar flame aCFPF with heat loss on the product side is considered as a flamelet configuration that represents an elementary unit of a turbulent flame and the consumption speed is used to characterize the effect of strain and heat loss. Due to the ambiguity in the definition of the consumption speed of multi-component mixtures, two definitions are compared. The definition of the consumption speed based on the heat release results in lower values of the stretched flame speed and even an opposite response to strain rate for some methane-hydrogen-air mixtures compared to the definition based on the fuel consumption. Strain rate leads to an increase in the flame speed for the lean methane-hydrogen mixtures, reaching a maximum value after which the flame speed decreases with strain rate. Heat loss decreases the stretched flame speed and leads to a sooner extinction of the flamelet due to combined strain and heat loss. Hydrogen addition and equivalence ratio significantly impact the maximum consumption speed and the flame response to combined strain rate and heat loss. The effect of hydrogen on the thermo-diffusive properties of the mixture, characterized by the Zel'dovich number and the effective Lewis number, are also analyzed and related to the effect on the consumption speed. Two definitions of the Lewis number of the multi-component fuel mixture are evaluated against the results from the aCFPF.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Purification Efficiency and Radon Emanation of Gas Purifiers used with Pure and Binary Gas Mixtures for Gaseous Dark Matter Detectors
Authors:
K.,
Altenmüller,
J. F. Castel,
S. Cebrián,
T. Dafní,
D. Díez-Ibáñez,
J. Galán,
J. Galindo,
J. A. García,
I. G. Irastorza,
I. Katsioulas,
P. Knights,
G. Luzón,
I. Manthos,
C. Margalejo,
J. Matthews,
K. Mavrokoridis,
H. Mirallas,
T. Neep,
K. Nikolopoulos,
L. Obis,
A. Ortiz de Solórzano,
O. Pérez,
B. Philippou,
R. Ward
Abstract:
Rare event searches require extreme radiopurity in all detector components. This includes the active medium, which in the case of gaseous detectors, is the operating gas. The gases used typically include noble gas mixtures with molecular quenchers. Purification of these gases is required to achieve the desired detector performance, however, purifiers are known to emanate 222 Rn, which is a potenti…
▽ More
Rare event searches require extreme radiopurity in all detector components. This includes the active medium, which in the case of gaseous detectors, is the operating gas. The gases used typically include noble gas mixtures with molecular quenchers. Purification of these gases is required to achieve the desired detector performance, however, purifiers are known to emanate 222 Rn, which is a potential source of background. Several purifiers are studied for their O 2 and H 2 O purification efficiency and Rn emanation rates, aiming to identify the lowest-Rn options. Furthermore, the absorption of quenchers by the purifiers is assessed when used in a recirculating closed-loop gas system.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Bayesian Optimization of the Beam Injection Process into a Storage Ring
Authors:
Chenran Xu,
Tobias Boltz,
Akira Mochihashi,
Andrea Santamaria Garcia,
Marcel Schuh,
Anke-Susanne Müller
Abstract:
We have evaluated the data-efficient Bayesian optimization method for the specific task of injection tuning in a circular accelerator. In this paper, we describe the implementation of this method at the Karlsruhe Research Accelerator with up to nine tuning parameters, including the determination of the associated hyperparameters. We show that the Bayesian optimization method outperforms manual tun…
▽ More
We have evaluated the data-efficient Bayesian optimization method for the specific task of injection tuning in a circular accelerator. In this paper, we describe the implementation of this method at the Karlsruhe Research Accelerator with up to nine tuning parameters, including the determination of the associated hyperparameters. We show that the Bayesian optimization method outperforms manual tuning and the commonly used Nelder-Mead optimization algorithm both in simulation and experiment. The algorithm was also successfully used to ease the commissioning phase after the installation of new injection magnets and is regularly used during accelerator operations. We demonstrate that the introduction of context variables that include intra-bunch scattering effects, such as the Touschek effect, further improves the control and robustness of the injection process.
△ Less
Submitted 6 March, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
Validity of path thermodynamic description of reactive systems: Microscopic simulations
Authors:
F. Baras,
A. L. Garcia,
M. Malek Mansour
Abstract:
Traditional stochastic modeling of reactive systems limits the domain of applicability of the associated path thermodynamics to systems involving a single elementary reaction at the origin of each observed change in composition. An alternative stochastic modeling has recently been proposed to overcome this limitation. These two ways of modeling reactive systems are in principle incompatible. The q…
▽ More
Traditional stochastic modeling of reactive systems limits the domain of applicability of the associated path thermodynamics to systems involving a single elementary reaction at the origin of each observed change in composition. An alternative stochastic modeling has recently been proposed to overcome this limitation. These two ways of modeling reactive systems are in principle incompatible. The question thus arises about choosing the appropriate type of modeling to be used in practical situations. In the absence of sufficiently accurate experimental results, one way to address this issue is through the microscopic simulation of reactive fluids, usually based on hard-sphere dynamics in the Boltzmann limit. In this paper, we show that results obtained through such simulations unambiguously confirm the predictions of traditional stochastic modeling, invalidating a recently proposed alternative.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Staggered Scheme for the Compressible Fluctuating Hydrodynamics of Multispecies Fluid Mixtures
Authors:
Ishan Srivastava,
Daniel R. Ladiges,
Andy J. Nonaka,
Alejandro L. Garcia,
John B. Bell
Abstract:
We present a numerical formulation for the solution of non-isothermal, compressible, Navier-Stokes equations with thermal fluctuations to describe mesoscale transport phenomena in multispecies fluid mixtures. The novelty of our numerical method is the use of staggered grid momenta along with a finite volume discretization of the thermodynamic variables to solve the resulting stochastic partial dif…
▽ More
We present a numerical formulation for the solution of non-isothermal, compressible, Navier-Stokes equations with thermal fluctuations to describe mesoscale transport phenomena in multispecies fluid mixtures. The novelty of our numerical method is the use of staggered grid momenta along with a finite volume discretization of the thermodynamic variables to solve the resulting stochastic partial differential equations. The key advantages of the numerical scheme are significantly simplified and compact discretization of the diffusive and stochastic momentum fluxes, and an unambiguous prescription of boundary conditions involving pressure. The staggered grid scheme more accurately reproduces the equilibrium static structure factor of hydrodynamic fluctuations in gas mixtures compared to a collocated scheme described previously in Balakrishnan \emph{et al.} [Phys. Rev. E 89, 013017 (2014)]. The numerical method is tested for ideal noble gases mixtures under various nonequilibrium conditions, such as applied thermal and concentration gradients, to assess the role of cross-diffusion effects, such as Soret and Dufour, on the long-ranged correlations of hydrodynamic fluctuations, which are also more accurately reproduced compared to the collocated scheme. We numerically study giant nonequilibrium fluctuations driven by concentration gradients, and fluctuation-driven Rayleigh-Taylor instability in gas mixtures. Wherever applicable, excellent agreement is observed with theory and measurements from the direct simulation Monte Carlo (DSMC) method.
△ Less
Submitted 30 January, 2023; v1 submitted 22 September, 2022;
originally announced September 2022.
-
Modular implementation of the linear and cubic-scaling orbital minimization methods in electronic structure codes using atomic orbitals
Authors:
Irina V. Lebedeva,
Alberto Garcia,
Emilio Artacho,
Pablo Ordejon
Abstract:
We present a code modularization approach to design efficient and massively parallel cubic and linear-scaling solvers for electronic structure calculations using atomic orbitals. The modular implementation of the orbital minimization method, in which linear algebra and parallelization issues are handled via external libraries, is demonstrated in the SIESTA code. The DBCSR and ScaLAPACK libraries a…
▽ More
We present a code modularization approach to design efficient and massively parallel cubic and linear-scaling solvers for electronic structure calculations using atomic orbitals. The modular implementation of the orbital minimization method, in which linear algebra and parallelization issues are handled via external libraries, is demonstrated in the SIESTA code. The DBCSR and ScaLAPACK libraries are used for algebraic operations with sparse and dense matrices, respectively. The MatrixSwitch and libOMM libraries, recently developed within the Electronic Structure Library, facilitate switching between different matrix formats and implement the energy minimization. We show results comparing the performance of several cubic-scaling algorithms, and also demonstrate the parallel performance of the linear-scaling solvers, and their supremacy over the cubic-scaling solvers for insulating systems with sizes of several hundreds of atoms.
△ Less
Submitted 26 April, 2023; v1 submitted 13 September, 2022;
originally announced September 2022.
-
Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker
, et al. (359 additional authors not shown)
Abstract:
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen…
▽ More
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events.
△ Less
Submitted 11 October, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Detection schemes for quantum vacuum diffraction and birefringence
Authors:
N. Ahmadiniaz,
T. E. Cowan,
J. Grenzer,
S. Franchino-Viñas,
A. Laso Garcia,
M. Šmíd,
T. Toncian,
M. A. Trejo,
R. Schützhold
Abstract:
Motivated by recent experimental initiatives, such as at the Helmholtz International Beamline for Extreme Fields (HIBEF) at the European X-ray Free Electron Laser (XFEL), we calculate the birefringent scattering of x-rays at the combined field of two optical (or near-optical) lasers and compare various scenarios. In order to facilitate an experimental detection of quantum vacuum diffraction and bi…
▽ More
Motivated by recent experimental initiatives, such as at the Helmholtz International Beamline for Extreme Fields (HIBEF) at the European X-ray Free Electron Laser (XFEL), we calculate the birefringent scattering of x-rays at the combined field of two optical (or near-optical) lasers and compare various scenarios. In order to facilitate an experimental detection of quantum vacuum diffraction and birefringence, special emphasis is placed on scenarios where the difference between the initial and final x-ray photons is maximized. Apart from their polarization, these signal and background photons may differ in propagation direction (corresponding to scattering angles in the mrad regime) and possibly energy.
△ Less
Submitted 20 March, 2023; v1 submitted 28 August, 2022;
originally announced August 2022.
-
Endemic infectious states below the epidemic threshold and beyond herd immunity
Authors:
Javier Aguilar,
Beatriz Arregui García,
Raúl Toral,
Sandro Meloni,
Jose J. Ramasco
Abstract:
In the recent COVID-19 pandemic we assisted at a sequence of epidemic waves intertwined by anomalous fade-outs with periods of low but persistent epidemic prevalence. These long-living epidemic states complicate epidemic control and challenge current modeling approaches as classical epidemic models fail to explain their emergence. Inspired by this phenomenon, we propose a simple mechanism able to…
▽ More
In the recent COVID-19 pandemic we assisted at a sequence of epidemic waves intertwined by anomalous fade-outs with periods of low but persistent epidemic prevalence. These long-living epidemic states complicate epidemic control and challenge current modeling approaches as classical epidemic models fail to explain their emergence. Inspired by this phenomenon, we propose a simple mechanism able to reproduce several features observed in real data. Specifically, here we introduce a modification of the Susceptible-Infected-Recovered (SIR) model in a meta-population framework where a small inflow of infected individuals accounts for undetected internal or imported cases. Focusing on a regime where this external seeding is so small that cannot be detected from the analysis of epidemic curves, we find that outbreaks of finite duration percolate in time resulting in overall low but long-living epidemic states below and above the epidemic threshold. Using a two-state description of the local dynamics, we can extract analytical predictions for the phase space. The comparison with epidemic data demonstrates that our model is able to reproduce some critical signatures observed in COVID-19 spreading in England. Finally, our findings defy our understanding of the concept of epidemic threshold and its relationship with outbreaks survival for disease control.
△ Less
Submitted 13 March, 2023; v1 submitted 7 July, 2022;
originally announced July 2022.
-
Modeling Electrokinetic Flows with the Discrete Ion Stochastic Continuum Overdamped Solvent Algorithm
Authors:
Daniel R. Ladiges,
Jailun G. Wang,
Ishan Srivastava,
Sean P. Carney,
Andrew Nonaka,
Alejandro L. Garcia,
Aleksander Donev,
John B. Bell
Abstract:
In this article we develop an algorithm for the efficient simulation of electrolytes in the presence of physical boundaries. In previous work the Discrete Ion Stochastic Continuum Overdamped Solvent (DISCOS) algorithm was derived for triply periodic domains, and was validated through ion-ion pair correlation functions and Debye-H{ü}ckel-Onsager theory for conductivity, including the Wien effect fo…
▽ More
In this article we develop an algorithm for the efficient simulation of electrolytes in the presence of physical boundaries. In previous work the Discrete Ion Stochastic Continuum Overdamped Solvent (DISCOS) algorithm was derived for triply periodic domains, and was validated through ion-ion pair correlation functions and Debye-H{ü}ckel-Onsager theory for conductivity, including the Wien effect for strong electric fields. In extending this approach to include an accurate treatment of physical boundaries we must address several important issues. First, the modifications to the spreading and interpolation operators necessary to incorporate interactions of the ions with the boundary are described. Next we discuss the modifications to the electrostatic solver to handle the influence of charges near either a fixed potential or dielectric boundary. An additional short-ranged potential is also introduced to represent interaction of the ions with a solid wall. Finally, the dry diffusion term is modified to account for the reduced mobility of ions near a boundary, which introduces an additional stochastic drift correction. Several validation tests are presented confirming the correct equilibrium distribution of ions in a channel. Additionally, the methodology is demonstrated using electro-osmosis and induced charge electro-osmosis, with comparison made to theory and other numerical methods. Notably, the DISCOS approach achieves greater accuracy than a continuum electrostatic simulation method. We also examine the effect of under-resolving hydrodynamic effects using a `dry diffusion' approach, and find that considerable computational speedup can be achieved with a negligible impact on accuracy.
△ Less
Submitted 11 July, 2022; v1 submitted 29 April, 2022;
originally announced April 2022.
-
Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
T. Beyrouthy,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (157 additional authors not shown)
Abstract:
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co…
▽ More
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Multi-Channel Convolutional Analysis Operator Learning for Dual-Energy CT Reconstruction
Authors:
Alessandro Perelli,
Suxer Alfonso Garcia,
Alexandre Bousse,
Jean-Pierre Tasu,
Nikolaos Efthimiadis,
Dimitris Visvikis
Abstract:
Objective. Dual-energy computed tomography (DECT) has the potential to improve contrast, reduce artifacts and the ability to perform material decomposition in advanced imaging applications. The increased number or measurements results with a higher radiation dose and it is therefore essential to reduce either number of projections per energy or the source X-ray intensity, but this makes tomographi…
▽ More
Objective. Dual-energy computed tomography (DECT) has the potential to improve contrast, reduce artifacts and the ability to perform material decomposition in advanced imaging applications. The increased number or measurements results with a higher radiation dose and it is therefore essential to reduce either number of projections per energy or the source X-ray intensity, but this makes tomographic reconstruction more ill-posed.
Approach. We developed the multi-channel convolutional analysis operator learning (MCAOL) method to exploit common spatial features within attenuation images at different energies and we propose an optimization method which jointly reconstructs the attenuation images at low and high energies with a mixed norm regularization on the sparse features obtained by pre-trained convolutional filters through the convolutional analysis operator learning (CAOL) algorithm.
Main results. Extensive experiments with simulated and real computed tomography (CT) data were performed to validate the effectiveness of the proposed methods and we reported increased reconstruction accuracy compared to CAOL and iterative methods with single and joint total-variation (TV) regularization.
Significance. Qualitative and quantitative results on sparse-views and low-dose DECT demonstrate that the proposed MCAOL method outperforms both CAOL applied on each energy independently and several existing state-of-the-art model-based iterative reconstruction (MBIR) techniques, thus paving the way for dose reduction.
△ Less
Submitted 10 March, 2022;
originally announced March 2022.
-
Model reduction methods for nuclear emulators
Authors:
J. A. Melendez,
C. Drischler,
R. J. Furnstahl,
A. J. Garcia,
Xilin Zhang
Abstract:
The field of model order reduction (MOR) is growing in importance due to its ability to extract the key insights from complex simulations while discarding computationally burdensome and superfluous information. We provide an overview of MOR methods for the creation of fast & accurate emulators of memory- and compute-intensive nuclear systems. As an example, we describe how "eigenvector continuatio…
▽ More
The field of model order reduction (MOR) is growing in importance due to its ability to extract the key insights from complex simulations while discarding computationally burdensome and superfluous information. We provide an overview of MOR methods for the creation of fast & accurate emulators of memory- and compute-intensive nuclear systems. As an example, we describe how "eigenvector continuation" is a special case of a much more general and well-studied MOR formalism for parameterized systems. We continue with an introduction to the Ritz and Galerkin projection methods that underpin many such emulators, while pointing to the relevant MOR theory and its successful applications along the way. We believe that this will open the door to broader applications in nuclear physics and facilitate communication with practitioners in other fields.
△ Less
Submitted 10 May, 2022; v1 submitted 10 March, 2022;
originally announced March 2022.