-
Parallel-in-Time Integration of Transient Phenomena in No-Insulation Superconducting Coils Using Parareal
Authors:
Erik Schnaubelt,
Mariusz Wozniak,
Julien Dular,
Idoia Cortes Garcia,
Arjan Verweij,
Sebastian Schöps
Abstract:
High-temperature superconductors (HTS) have the potential to enable magnetic fields beyond the current limits of low-temperature superconductors in applications like accelerator magnets. However, the design of HTS-based magnets requires computationally demanding transient multi-physics simulations with highly non-linear material properties. To reduce the solution time, we propose using Parareal (P…
▽ More
High-temperature superconductors (HTS) have the potential to enable magnetic fields beyond the current limits of low-temperature superconductors in applications like accelerator magnets. However, the design of HTS-based magnets requires computationally demanding transient multi-physics simulations with highly non-linear material properties. To reduce the solution time, we propose using Parareal (PR) for parallel-in-time magneto-thermal simulation of magnets based on HTS, particularly, no-insulation coils without turn-to-turn insulation. We propose extending the classical PR method to automatically find a time partitioning using a first coarse adaptive propagator. The proposed PR method is shown to reduce the computing time when fine engineering tolerances are required despite the highly nonlinear character of the problem. The full software stack used is open-source.
△ Less
Submitted 20 April, 2024;
originally announced April 2024.
-
Arsenic diffusion in MOVPE-Grown GaAs/Ge epitaxial structures
Authors:
V. Orejuela,
E. Garcia-Tabares,
I. Rey-Stolle,
I. Garcia
Abstract:
Germanium is reemerging as a prominent material in the semiconductor field, particularly for electronic applications, photonics, photovoltaics and thermophotovoltaics. Its combination with III-V compound semiconductors through epitaxial growth by metal organic vapor phase epitaxy (MOVPE) is instrumental and thus, the comprehension of the sequential stages in such epitaxial processes is of great im…
▽ More
Germanium is reemerging as a prominent material in the semiconductor field, particularly for electronic applications, photonics, photovoltaics and thermophotovoltaics. Its combination with III-V compound semiconductors through epitaxial growth by metal organic vapor phase epitaxy (MOVPE) is instrumental and thus, the comprehension of the sequential stages in such epitaxial processes is of great importance. During the deposition of GaAs on p-type Ge, the formation of n/p junctions occurs when As diffuses into Ge. It is found that this formation begins in the so-called AsH3 preexposure where Ge substrate is firstly exposed to AsH3. Also important is the fact that both free carrier profiles and As profiles indicate that prolonged AsH3 preexposure times lead to deeper diffusion depths for the same process time. This effect is concomitant with the degradation of the Ge surface morphology, characterized by higher roughness as the AsH3 preexposure duration is extended. Contrary to ion-implanted As in germanium, which shows quadratic dependent diffusivity, our MOVPE investigation using AsH3 indicates a linear relationship, consistent with Takenaka et al.'s MOVPE study using TBAs. Analyzing As profiles alongside simulations, with and without subsequent GaAs epitaxy, suggests the generation of Ge vacancies during the process, contributing to deeper As diffusion.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Working paper: Characterizing the mode-choice behavior
Authors:
Kathleen Salazar-Serna,
Jesus D. Diaz,
Isabel C. Garcia
Abstract:
Urban mobility in develo** countries, particularly in cities like Cali, Colombia, faces multifaceted challenges influenced by socioeconomic factors and the distinct characteristics of transport users Despite motorcycles emerging as a prevalent mode, their impact remains underexplored in the literature. This study employs extensive survey data collection, descriptive and cluster analysis, enablin…
▽ More
Urban mobility in develo** countries, particularly in cities like Cali, Colombia, faces multifaceted challenges influenced by socioeconomic factors and the distinct characteristics of transport users Despite motorcycles emerging as a prevalent mode, their impact remains underexplored in the literature. This study employs extensive survey data collection, descriptive and cluster analysis, enabling an understanding of mode choice behaviors. Comparative analyses reveal significant relationships between transport choices and variables such as socio-economic status and age. Cluster analysis unveiled distinct behavior patterns among Cali's urban transport users. Identifying groups with similar preferences and perceptions enhanced comprehension of diverse user needs, hel** to understand travel behavior within the urban transport context. This study contributes to close knowledge gap insight into the intricate landscape of urban transport in develo** countries. The findings offer a foundation for informed policy development, emphasizing the importance of considering socioeconomic factors, travel preferences, and the prevalence of motorcycles in crafting effective urban strategies.
△ Less
Submitted 10 February, 2024;
originally announced February 2024.
-
No-go theorems for photon state transformations in quantum linear optics
Authors:
Pablo V. Parellada,
Vicent Gimeno i Garcia,
Julio-José Moyano-Fernández,
Juan Carlos Garcia-Escartin
Abstract:
We give a necessary condition for photon state transformations in linear optical setups preserving the total number of photons. From an analysis of the algebra describing the quantum evolution, we find a conserved quantity that appears in all allowed optical transformations. We comment some examples and numerical applications, with example code, and give three general no-go results. These include…
▽ More
We give a necessary condition for photon state transformations in linear optical setups preserving the total number of photons. From an analysis of the algebra describing the quantum evolution, we find a conserved quantity that appears in all allowed optical transformations. We comment some examples and numerical applications, with example code, and give three general no-go results. These include (i) the impossibility of deterministic transformations which redistribute the photons from one to two different modes, (ii) a proof that it is impossible to generate a perfect Bell state in heralded schemes with a separable input for any number of ancillary photons and modes and a fixed herald and (iii) a restriction for the conversion between different types of entanglement (converting GHZ to W states).
△ Less
Submitted 9 November, 2023; v1 submitted 21 July, 2023;
originally announced July 2023.
-
Precision Measurement of the Specific Activity of $^{39}$Ar in Atmospheric Argon with the DEAP-3600 Detector
Authors:
P. Adhikari,
R. Ajaj,
M. Alpízar-Venegas,
P. -A. Amaudruz,
J. Anstey,
G. R. Araujo,
D. J. Auty,
M. Baldwin,
M. Batygov,
B. Beltran,
H. Benmansour,
C. E. Bina,
J. Bonatt,
W. Bonivento,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
P. M. Burghardt,
A. Butcher,
M. Cadeddu,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
M. Chen,
Y. Chen
, et al. (125 additional authors not shown)
Abstract:
The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoi…
▽ More
The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoils and is well-suited to measure the decay of $^{39}$Ar. With 167 live-days of data, the measured specific activity at the time of atmospheric extraction is [0.964 $\pm$ 0.001 (stat) $\pm$ 0.024 (sys)] Bq/kg$_{\rm atmAr}$ which is consistent with results from other experiments. A cross-check analysis using different event selection criteria provides a consistent result.
△ Less
Submitted 10 October, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
Plasmonic Photochemistry as a Tool to Prepare Metallic Nanopores with Controlled Diameter
Authors:
German Lanzavecchia,
Joel Kuttruff,
Andrea Doricchi,
Ali Douaki,
Kumaranchira Ramankutty Krishnadas,
Isabel Garcia,
Alba Viejo Rodríguez,
Thomas Wågberg,
Roman Krahne,
Nicolò Maccaferri,
Denis Garoli
Abstract:
We show that plasmonic solid-state nanopores with tunable hole diameter can be prepared via a photocatalytic effect resulting from the enhanced electromagnetic field inside a metallic ring prepared on top of a dielectric nanotube. Under white light illumination, the maximum field intensity in these nanorings induces a site selective metal nucleation and growth. We used this approach to prepare bar…
▽ More
We show that plasmonic solid-state nanopores with tunable hole diameter can be prepared via a photocatalytic effect resulting from the enhanced electromagnetic field inside a metallic ring prepared on top of a dielectric nanotube. Under white light illumination, the maximum field intensity in these nanorings induces a site selective metal nucleation and growth. We used this approach to prepare bare Au and bimetallic Au-Ag nanorings and demonstrate the reduction of the initial inner diameter of the nanopore down to 4 nanometers. This process can be applied over large arrays with good reproducibility and good control on the nanopore diameter. The tunability of the nanopore diameter can be used to enable optimized detection of single entities with different size, such as single nanoparticles or biomolecules. As proof-of-concept, we demonstrate the versatility of the platform to perform single object detection of dsDNA, and Au nanoparticles with a diameter of 15 nm and 30 nm. We support our experimental findings with numerical simulations that provide insights into the electromagnetic field intensity distribution, showing that a field intensity enhancement of up to 104 can be achieved inside the nanopores. This strong field confinement inside the final nanopore can be used to perform enhanced optical measurements, and to generate local heating, thereby modifying the ionic conductance of the nanopore
△ Less
Submitted 12 February, 2023;
originally announced February 2023.
-
Improved GaInP/GaAs/GaInAs inverted metamorphic triple-junction solar cells by reduction of Zn diffusion in the top subcell
Authors:
Manuel Hinojosa,
Ivan Lombardero,
Carlos Algora,
Ivan Garcia
Abstract:
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type do** in the emitter of the GaInP top junction, degrading severely the conductivity of the whole solar cell and its conversion efficiency. This work evaluates different epitaxial g…
▽ More
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type do** in the emitter of the GaInP top junction, degrading severely the conductivity of the whole solar cell and its conversion efficiency. This work evaluates different epitaxial growth strategies to achieve control on the Zn profile of an inverted metamorphic triple-junction structure, including: the reduction of the do** concentration in the tunnel junction to minimize the injection of point defects that trigger the diffusion mechanism; the use of different barrier layers to keep the injected point defects away from active layers and, finally, the minimization of Zn concentration in the AlGaInP back-surface-field layer of the GaInP subcell. This last approach enables a high-conductivity multijunction solar cell device without redesigning the tunnel junction as well as a high electronic quality in the GaInP subcell, which shows a collection efficiency higher than 93% and an open-circuit-voltage offset of 410 mV at 1 sun irradiance. The characterization of final triple-junction devices, including quantum efficiency, electroluminescence, and light current-density-voltage curves at different irradiances, demonstrates a successful integration of all the subcell and tunnel junction components. This way, final solar cells with peak efficiencies exceeding 40% at 500 suns are demonstrated, despite using do** levels in the AlGaInP:Zn back-surface-field of the GaInP subcell and using non-optimized antireflective coatings.
△ Less
Submitted 25 November, 2022;
originally announced November 2022.
-
Hybrid III-V/SiGe solar cells on Si substrates and porous Si substrates
Authors:
Pablo Caño,
Manuel Hinojosa,
Luis Cifuentes,
Huy Nguyen,
Aled Morgan,
David Fuertes Marrón,
Iván García,
Andrew Johnson,
Ignacio Rey Stolle
Abstract:
A tandem GaAsP/SiGe solar cell has been developed employing group-IV reverse buffer layers grown on silicon substrates with a subsurface porous layer. Reverse buffer layers facilitate a reduction in the threading dislocation density with limited thicknesses, but ease the appearance of cracks, as observed in previous designs grown on regular Si substrates. In this new design, a porous silicon layer…
▽ More
A tandem GaAsP/SiGe solar cell has been developed employing group-IV reverse buffer layers grown on silicon substrates with a subsurface porous layer. Reverse buffer layers facilitate a reduction in the threading dislocation density with limited thicknesses, but ease the appearance of cracks, as observed in previous designs grown on regular Si substrates. In this new design, a porous silicon layer has been incorporated close to the substrate surface. The ductility of this layer helps repress the propagation of cracks, diminishing the problems of low shunt resistance and thus improving solar cell performance. The first results of this new architecture are presented here.
△ Less
Submitted 25 May, 2022;
originally announced May 2022.
-
Evidence of enhanced Zn-diffusion observed during the growth of Inverted Metamorphic Solar Cells
Authors:
Manuel Hinojosa,
Ivan Garcia,
Ignacio Rey-Stolle,
Carlos Algora
Abstract:
Zinc-diffusion can induce multiple failures in the electrical performance of a multijunction solar cell. In this work, we show an important Zn-diffusion from the AlGaInP back-surface-field layer to the emitter of the GaInP top cell of an inverted multijunction solar cell. Through the analysis of different do** profiles, we provide strong evidence that the diffusion mechanism is (1) triggered by…
▽ More
Zinc-diffusion can induce multiple failures in the electrical performance of a multijunction solar cell. In this work, we show an important Zn-diffusion from the AlGaInP back-surface-field layer to the emitter of the GaInP top cell of an inverted multijunction solar cell. Through the analysis of different do** profiles, we provide strong evidence that the diffusion mechanism is (1) triggered by the growth of the tunnel junction cathode and (2) involves point defects. We analyze the implications of Zn-diffusion on the bandgap, the rear-passivation and the minority carrier quality of the GaInP solar subcell by relating the electrical performance of different samples to its corresponding do** profile.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics
Authors:
J. Aalbers,
K. Abe,
V. Aerne,
F. Agostini,
S. Ahmed Maouloud,
D. S. Akerib,
D. Yu. Akimov,
J. Akshat,
A. K. Al Musalhi,
F. Alder,
S. K. Alsum,
L. Althueser,
C. S. Amarasinghe,
F. D. Amaro,
A. Ames,
T. J. Anderson,
B. Andrieu,
N. Angelides,
E. Angelino,
J. Angevaare,
V. C. Antochi,
D. Antón Martin,
B. Antunovic,
E. Aprile,
H. M. Araújo
, et al. (572 additional authors not shown)
Abstract:
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut…
▽ More
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Design of AlGaAs Laser Power Converters for the First Transmission Window
Authors:
Marina Delgado,
Iván García,
Carlos Algora
Abstract:
Thermalization losses in Laser Power Converters for the first transmission window occur due to the energy difference between 808 nm wavelength photons and the GaAs bandgap energy which results in lower efficiency. In this work, we analyze the potential of increasing the bandgap using AlGaAs to minimize the energy difference. The optimum aluminum content is 7 % in both single and triple junction co…
▽ More
Thermalization losses in Laser Power Converters for the first transmission window occur due to the energy difference between 808 nm wavelength photons and the GaAs bandgap energy which results in lower efficiency. In this work, we analyze the potential of increasing the bandgap using AlGaAs to minimize the energy difference. The optimum aluminum content is 7 % in both single and triple junction converters reaching a maximum ideal efficiency of 71% at 1 W/cm2 and 77% at 50 W/cm2.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
High intensity proton beam impact at 440 GeV/c on Mo and Cu coated CfC/graphite and SiC/SiC absorbers for beam intercepting devices
Authors:
Jorge Maestre,
Cristina Bahamonde,
Inigo Lamas Garcia,
Keith Kershaw,
Nicolo Biancacci,
Josep Busom,
Matthias Frankl,
Anton Lechner,
Adnan Kurtulus,
Shunsuke Makimura,
Naofumi Nakazato,
Ana Teresa Perez,
Antonio Perillo-Marcone,
Benoit Salvant,
Regis Seidenbinder,
Lorenzo Teofili,
Marco Calviani
Abstract:
Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the…
▽ More
Beam Intercepting Devices (BIDs) are essential protection elements for the operation of the Large Hadron Collider (LHC) complex. The LHC internal beam dump (LHC Target Dump Injection or LHC TDI) is the main protection BID of the LHC injection system; its main function is to protect LHC equipment in the event of a malfunction of the injection kicker magnets during beam transfer from the SPS to the LHC. Several issues with the TDI were encountered during LHC operation, most of them due to outgassing from its core components induced by electron cloud effects, which led to limitations of the injector intensity and hence had an impact on LHC availability. The absorbing cores of the TDIs, and of beam intercepting devices in general, need to deal with high thermo-mechanical loads induced by the high intensity particle beams. In addition, devices such as the TDI - where the absorbing materials are installed close to the beam, are important contributors to the accelerator impedance budget. To reduce impedance, the absorbing materials that make up the core must be typically coated with high electrical conductivity metals. Beam impact testing of the coated absorbers is a crucial element of development work to ensure their correct operation. The behaviour of several metal-coated absorber materials was investigated when exposed to high intensity and high energy proton beams in the HiRadMat facility at CERN. Different coating configurations based on copper and molybdenum, and absorbing materials such as isostatic graphite, Carbon Fibre Composite (CfC) and Silicon Carbide reinforced with Silicon Carbide fibres (SiC-SiC), were tested in the facility to assess the TDI's performance and to extract information for other BIDs using these materials. In addition to beam impact tests and an extensive Post Irradiation Examination (PIE) campaign, extensive numerical simulations were carried out.
△ Less
Submitted 22 December, 2021; v1 submitted 9 December, 2021;
originally announced December 2021.
-
Inverted GaInP/GaAs Three-Terminal Heterojunction Bipolar Transistor Solar Cell
Authors:
Marius H. Zehender,
Simon. A. Svatek,
Myles A. Steiner,
Iván García,
Pablo García Linares,
Emily L. Warren,
Antonio Martí,
Adele. C. Tamboli,
Elisa Antolín
Abstract:
Here we present the experimental results of an inverted three-terminal heterojunction bipolar transistor solar cell (HBTSC) made of GaInP/GaAs. The inverted growth and processing enable contacting the intermediate layer (base) from the bottom, which improves the cell performance by reducing shadow factor and series resistance at the same time. With this prototype we show that an inverted processin…
▽ More
Here we present the experimental results of an inverted three-terminal heterojunction bipolar transistor solar cell (HBTSC) made of GaInP/GaAs. The inverted growth and processing enable contacting the intermediate layer (base) from the bottom, which improves the cell performance by reducing shadow factor and series resistance at the same time. With this prototype we show that an inverted processing of a three-terminal solar cell is feasible and pave the way for the application of epitaxial lift-off, substrate reuse and mechanical stacking to the HBTSC which can eventually lead to a low-cost high-efficiency III-V-on-Si HBTSC technology.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Thinned GaInP/GaInAs/Ge solar cells grown with reduced cracking on Ge|Si virtual substrates
Authors:
Ivan García,
Laura Barrutia,
Shabnam Dadgostar,
Manuel Hinojosa,
Andrew Johnson,
Ignacio Rey-Stolle
Abstract:
Reducing the formation of cracks during growth of GaInP/GaInAs/Ge 3-junction solar cells on Ge|Si virtual substrates has been attempted by thinning the structure, namely the Ge bottom cell and the GaInAs middle cell. The theoretical analysis performed using realistic device parameters indicates that the GaInAs middle cell can be drastically thinned to 1000 nm while increasing its In content to 8%…
▽ More
Reducing the formation of cracks during growth of GaInP/GaInAs/Ge 3-junction solar cells on Ge|Si virtual substrates has been attempted by thinning the structure, namely the Ge bottom cell and the GaInAs middle cell. The theoretical analysis performed using realistic device parameters indicates that the GaInAs middle cell can be drastically thinned to 1000 nm while increasing its In content to 8% with an efficiency loss in the 3-junction cell below 3%. The experimental results show that the formation of macroscopic cracks is prevented in thinned GaInAs/Ge 2-junction and GaInP/GaInAs/Ge 3-junction cells. These prototype crack-free multijunction cells demonstrate the concept and were used to rule out any possible component integration issue. The performance metrics are limited by the high threading dislocation density over 2e7cm-2 in the virtual substrates used, but an almost current matched, crack-free, thinned 3-junction solar cell is demonstrated, and the pathway towards solar cells with higher voltages identified.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Deep Learning for fully automatic detection, segmentation, and Gleason Grade estimation of prostate cancer in multiparametric Magnetic Resonance Images
Authors:
Oscar J. Pellicer-Valero,
José L. Marenco Jiménez,
Victor Gonzalez-Perez,
Juan Luis Casanova Ramón-Borja,
Isabel Martín García,
María Barrios Benito,
Paula Pelechano Gómez,
José Rubio-Briones,
María José Rupérez,
José D. Martín-Guerrero
Abstract:
The emergence of multi-parametric magnetic resonance imaging (mpMRI) has had a profound impact on the diagnosis of prostate cancers (PCa), which is the most prevalent malignancy in males in the western world, enabling a better selection of patients for confirmation biopsy. However, analyzing these images is complex even for experts, hence opening an opportunity for computer-aided diagnosis systems…
▽ More
The emergence of multi-parametric magnetic resonance imaging (mpMRI) has had a profound impact on the diagnosis of prostate cancers (PCa), which is the most prevalent malignancy in males in the western world, enabling a better selection of patients for confirmation biopsy. However, analyzing these images is complex even for experts, hence opening an opportunity for computer-aided diagnosis systems to seize. This paper proposes a fully automatic system based on Deep Learning that takes a prostate mpMRI from a PCa-suspect patient and, by leveraging the Retina U-Net detection framework, locates PCa lesions, segments them, and predicts their most likely Gleason grade group (GGG). It uses 490 mpMRIs for training/validation, and 75 patients for testing from two different datasets: ProstateX and IVO (Valencia Oncology Institute Foundation). In the test set, it achieves an excellent lesion-level AUC/sensitivity/specificity for the GGG$\geq$2 significance criterion of 0.96/1.00/0.79 for the ProstateX dataset, and 0.95/1.00/0.80 for the IVO dataset. Evaluated at a patient level, the results are 0.87/1.00/0.375 in ProstateX, and 0.91/1.00/0.762 in IVO. Furthermore, on the online ProstateX grand challenge, the model obtained an AUC of 0.85 (0.87 when trained only on the ProstateX data, tying up with the original winner of the challenge). For expert comparison, IVO radiologist's PI-RADS 4 sensitivity/specificity were 0.88/0.56 at a lesion level, and 0.85/0.58 at a patient level. Additional subsystems for automatic prostate zonal segmentation and mpMRI non-rigid sequence registration were also employed to produce the final fully automated system. The code for the ProstateX-trained system has been made openly available at https://github.com/OscarPellicer/prostate_lesion_detection. We hope that this will represent a landmark for future research to use, compare and improve upon.
△ Less
Submitted 2 February, 2022; v1 submitted 23 March, 2021;
originally announced March 2021.
-
High-Low Refractive Index Stacks for Broadband Antireflection Coatings for Multijunction Solar Cells
Authors:
GuoJiao Hou,
Iván García,
Ignacio Rey-Stolle
Abstract:
Antireflection coatings are an interesting challenge for multijunction solar cells due to their broadband spectrum absorption and the requirement of current matching of each subcell. A new design for multijunction solar cell antireflection coatings is presented in this work in which alternative high and low index materials are used to minimize the reflection in a broadband (300nm-1800nm). We compa…
▽ More
Antireflection coatings are an interesting challenge for multijunction solar cells due to their broadband spectrum absorption and the requirement of current matching of each subcell. A new design for multijunction solar cell antireflection coatings is presented in this work in which alternative high and low index materials are used to minimize the reflection in a broadband (300nm-1800nm). We compared the short circuit current density of high-low refractive index stacks designs with optimum double-layer antireflection coatings by considering two optical materials combinations (MgF2/ZnS and Al2O3/TiO2) for the AM0 and AM1.5D spectra. The calculations demonstrate that for lattice-matched triple-junction solar cells and inverted metamorphic quadruple-junction solar cells, high-low refractive index stacks outperform the optimum double-layer antireflection coatings. The new design philosophy requires no new optical materials because only two materials are used and exhibits excellent performance in broadband spectra. The angle performance of these antireflection coatings is slightly better than classical double-layers whereas the analysis for thickness sensitivity shows that small deviations from deposition targets only slightly impact the performance of antireflection coatings. Finally, some technical solutions for depositing these high-low refractive index multilayers are discussed.
△ Less
Submitted 18 January, 2021;
originally announced January 2021.
-
Point-defects assisted Zn-diffusion in AlGaInP/GaInP systems during the MOVPE growth of inverted multijunction solar cells
Authors:
Manuel Hinojosa,
Iván García,
Shabnam Dadgostar,
Carlos Algora
Abstract:
We investigate the dynamics of Zn diffusion in MOVPE-grown AlGaInP/GaInP systems by the comparison of different structures that emulate the back-surface field (BSF) and base layers of a GaInP subcell integrated into an inverted multijunction solar cell structure. Through the analysis of secondary ion mass spectroscopy (SIMS), electrochemical capacitance-voltage (ECV) and spectrally resolved cathod…
▽ More
We investigate the dynamics of Zn diffusion in MOVPE-grown AlGaInP/GaInP systems by the comparison of different structures that emulate the back-surface field (BSF) and base layers of a GaInP subcell integrated into an inverted multijunction solar cell structure. Through the analysis of secondary ion mass spectroscopy (SIMS), electrochemical capacitance-voltage (ECV) and spectrally resolved cathodoluminescence (CL) measurements, we provide experimental evidence that 1) the Zn diffusion is enhanced by point defects injected during the growth of the tunnel junction cathode layer; 2) the intensity of the process is determined by the cathode do** level and it happens for different cathode materials; 3) the mobile Zn is positively charged and 4) the diffusion mechanism reduces the CuPt ordering in GaInP. We demonstrate that using barrier layers the diffusion of point defects can be mitigated, so that they do not reach Zn-doped layers, preventing its diffusion. Finally, the impact of Zn diffusion on solar cells with different Zn-profiles is evaluated by comparing the electrical I-V curves at different concentrations. The results rule out the introduction of internal barriers in the BSF but illustrate how Zn diffusion under typical growth condition can reach the emitter and dramatically affect the series resistance, among other effects.
△ Less
Submitted 27 December, 2020;
originally announced December 2020.
-
On the Use of Graphene to Improve the Performance of Concentrator III-V Multijunction Solar Cells
Authors:
Laura Barrutia,
IvÁn Lombardero1,
Mario Ochoa,
Mercedes GabÁs,
IvÁn GarcÍa,
TomÁs Palacios,
Andrew Johnson,
Ignacio Rey-Stolle,
Carlos Algora
Abstract:
Graphene has been intensively studied in photovoltaics focusing on emerging solar cells based on thin films, dye-sensitized, quantum dots, nanowires, etc. However, the typical efficiency of these solar cells incorporating graphene are below 16%. Therefore, the photovoltaic potential of graphene has not been already shown. In this work the use of graphene for concentration applications on III-V mul…
▽ More
Graphene has been intensively studied in photovoltaics focusing on emerging solar cells based on thin films, dye-sensitized, quantum dots, nanowires, etc. However, the typical efficiency of these solar cells incorporating graphene are below 16%. Therefore, the photovoltaic potential of graphene has not been already shown. In this work the use of graphene for concentration applications on III-V multijunction solar cells, which indeed are the solar cells with the highest efficiency, is demonstrated. Firstly, a wide optoelectronic characterization of graphene layers is carried out. Then, the graphene layer is incorporated onto triple-junction solar cells, which decreases their series resistance by 35% (relative), leading to an increase in Fill Factor of 4% (absolute) at concentrations of 1,000 suns. Simultaneously, the optical absorption of graphene produces a relative short circuit current density decrease in the range of 0-1.8%. As a result, an absolute efficiency improvement close to 1% at concentrations of 1,000 suns was achieved with respect to triple junction solar cells without graphene. The impact of incorporating one and two graphene monolayers is also evaluated.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Impact of the III-V/Ge nucleation routine on the performance of high efficiency multijunction solar cells
Authors:
Laura Barrutia,
Ivan García,
Enrique Barrigon,
Mario Ochoa,
Carlos Algora,
Ignacio Rey-Stolle
Abstract:
This paper addresses the influence of III-V nucleation routines on Ge substrates for the growth of high efficiency multijunction solar cells. Three exemplary nucleation routines with differences in thickness and temperature were evaluated. The resulting open circuit voltage of triple-junction solar cells with these designs is significantly affected (up to 50 mV for the best optimization routine),…
▽ More
This paper addresses the influence of III-V nucleation routines on Ge substrates for the growth of high efficiency multijunction solar cells. Three exemplary nucleation routines with differences in thickness and temperature were evaluated. The resulting open circuit voltage of triple-junction solar cells with these designs is significantly affected (up to 50 mV for the best optimization routine), whereas minimal differences in short circuit current are observed. Electroluminescence measurements show that both the Ge bottom cell and the Ga(In)As middle cell present a VOC gain of 25 mV each. This result indicates that the first stages of the growth not only affect the Ge subcell itself but also to subsequent subcells. This study highlights the impact of the nucleation routine design in the performance of high efficiency multijunction solar cell based on Ge substrates.
△ Less
Submitted 2 July, 2020;
originally announced July 2020.
-
Magnetodynamic Finite-Element Simulation of Accelerator Magnets
Authors:
H. De Gersem,
I. Cortes Garcia,
L. A. M. D'Angelo,
S. Schöps
Abstract:
This lecture note describes how to set up and what is behind a magnetodynamic field simulation for an accelerator magnet. The relevant formulation of Maxwell's equations is derived. The formulation is discretized in space by the finite-element method and in time by a standard time integration method. The steps for setting up the accelerator-magnet model are described. An exemplary simulation of th…
▽ More
This lecture note describes how to set up and what is behind a magnetodynamic field simulation for an accelerator magnet. The relevant formulation of Maxwell's equations is derived. The formulation is discretized in space by the finite-element method and in time by a standard time integration method. The steps for setting up the accelerator-magnet model are described. An exemplary simulation of the GSI SIS-100 magnet is given as illustration. Finally, some extensions to the standard FE method, dedicated to accelerator magnets, are discussed.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Impact of spectral effects on photovoltaic energy production: A case study in the United States
Authors:
José M. Ripalda,
Daniel Chemisana,
José M. Llorens,
Iván García
Abstract:
The time averaged efficiency of photovoltaic modules in the field is generally lower than the efficiency measured in the laboratory under standard testing conditions due to the combined effects of temperature and spectral variability, affecting the bankability of power plant projects. We report correction factors to account for spectral effects ranging from -2% to 1.3% of the produced energy for s…
▽ More
The time averaged efficiency of photovoltaic modules in the field is generally lower than the efficiency measured in the laboratory under standard testing conditions due to the combined effects of temperature and spectral variability, affecting the bankability of power plant projects. We report correction factors to account for spectral effects ranging from -2% to 1.3% of the produced energy for silicon modules depending on location and collector geometry. In high irradiance locations, the energy yield advantage of trackers is underestimated by 0.4% if spectral sensitivity effects are neglected. We find a correlation between the locations most favourable for tracking, and those most favourable for multijunctions. As the photovoltaic market grows to a multi-terawatt size, these seemingly small effects are expected to have an economic impact equivalent to tens of billions of dollars in the next few decades, far out-weighting the cost of the required research effort.
△ Less
Submitted 30 March, 2020; v1 submitted 19 March, 2020;
originally announced March 2020.
-
Perturbed rank 2 Poisson systems and periodic orbits on Casimir invariant manifolds
Authors:
Isaac A. García,
Benito Hernández-Bermejo
Abstract:
A class of n-dimensional Poisson systems reducible to an unperturbed harmonic oscillator shall be considered. In such case, perturbations leaving invariant a given symplectic leaf shall be investigated. Our purpose will be to analyze the bifurcation phenomena of periodic orbits as a result of these perturbations in the period annulus associated to the unperturbed harmonic oscillator. This is accom…
▽ More
A class of n-dimensional Poisson systems reducible to an unperturbed harmonic oscillator shall be considered. In such case, perturbations leaving invariant a given symplectic leaf shall be investigated. Our purpose will be to analyze the bifurcation phenomena of periodic orbits as a result of these perturbations in the period annulus associated to the unperturbed harmonic oscillator. This is accomplished via the averaging theory up to an arbitrary order in the perturbation parameter e. In that theory we shall also use both branching theory and singularity theory of smooth maps to analyze the bifurcation phenomena at points where the implicit function theorem is not applicable. When the perturbation is given by a polynomial family, the associated Melnikov functions are polynomial and tools of computational algebra based on Gröbner basis are employed in order to reduce the generators of some polynomial ideals needed to analyze the bifurcation problem. When the most general perturbation of the harmonic oscillator by a quadratic perturbation field is considered, the complete bifurcation diagram (except at a high codimension subset) in the parameter space is obtained. Examples are given.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
Computational hemodynamics in arteries with the one-dimensional augmented fluid-structure interaction system: viscoelastic parameters estimation and comparison with in-vivo data
Authors:
Giulia Bertaglia,
Adrián Navas-Montilla,
Alessandro Valiani,
Manuel Ignacio Monge García,
Javier Murillo,
Valerio Caleffi
Abstract:
Mathematical models are widely recognized as a valuable tool for cardiovascular diagnosis and the study of circulatory diseases, especially to obtain data that require otherwise invasive measurements. To correctly simulate body hemodynamics, the viscoelastic properties of vessel walls are a key aspect to be taken into account as they play an essential role in cardiovascular behavior. The present w…
▽ More
Mathematical models are widely recognized as a valuable tool for cardiovascular diagnosis and the study of circulatory diseases, especially to obtain data that require otherwise invasive measurements. To correctly simulate body hemodynamics, the viscoelastic properties of vessel walls are a key aspect to be taken into account as they play an essential role in cardiovascular behavior. The present work aims to apply the augmented fluid-structure interaction system of blood flow to real case studies to assess the validity of the model as a valuable resource to improve cardiovascular diagnostics and the treatment of pathologies. First, the ability of the model to correctly simulate pulse waveforms in single arterial segments is verified using literature benchmark test cases. Such cases are designed taking into account a simple elastic behavior of the wall in the upper thoracic aorta and in the common carotid artery. Furthermore, in-vivo pressure waveforms, extracted from tonometric measurements performed on four human common carotid arteries and two common femoral arteries, are compared to numerical solutions. It is highlighted that the viscoelastic dam** effect of arterial walls is required to avoid an overestimation of pressure peaks. An effective procedure to estimate the viscoelastic parameters of the model is herein proposed, which returns hysteresis curves of the common carotid arteries dissipating energy fractions in line with values calculated from literature hysteresis loops in the same vessel.
△ Less
Submitted 6 December, 2019;
originally announced December 2019.
-
Inverted rear-heterojunction GaInP solar cells using Te memory effect
Authors:
Manuel Hinojosa,
Iván García,
Ignacio Rey-Stolle,
Carlos Algora
Abstract:
Tellurium allows attaining heavy n-type do** levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice ordering and presents a strong memory effect which induces residual n-type do** in subsequent layers, potentially detrimental to the performance of the solar cell.…
▽ More
Tellurium allows attaining heavy n-type do** levels in GaAs, which is suited to achieve very low contact resistivities in solar cells. Besides, it modifies the energy bandgap of MOVPE-grown GaInP by reducing the group-III sublattice ordering and presents a strong memory effect which induces residual n-type do** in subsequent layers, potentially detrimental to the performance of the solar cell. In this work, we present an inverted rear-heterojunction GaInP solar cell that employs a thick Te-doped GaInP layer as absorber, with a do** profile obtained exclusively by controlling the memory effect of Te coming from the preceding growth of a heavily doped GaAs contact layer. In this way, GaInP is partially disordered with the use of no additional surfactant, leading to an increase in the solar cell bandgap of around 35 meV as compared to traditional samples doped with silicon. In the proof-of-concept experimental devices developed so far, the use of a rear-heterojunction configuration and the bandgap increase results in a global open-circuit voltage enhancement of 109 mV. The photocurrent decreases by 1.32 mA/cm2, mostly due to the bandgap blue-shift, with about 0.35 mA/cm2 attributable to lower carrier collection efficiencies. These preliminary results are discussed by analyzing the I-V curve parameters and quantum efficiencies of a Te-doped rear-heterojunction, a Si-doped rear-heterojunction and a Si-doped front-junction solar cell. An additional advantage is that the emitter sheet resistance is reduced from 551 to 147 ohms/sq, which offers potential for higher efficiencies through lower front grid shadowing factors, as demonstrated with the concentrator measurements presented.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Inverse Jacobi multiplier as a link between conservative systems and Poisson structures
Authors:
Isaac A. García,
Benito Hernández-Bermejo
Abstract:
Some aspects of the relationship between conservativeness of a dynamical system (namely the preservation of a finite measure) and the existence of a Poisson structure for that system are analyzed. From the local point of view, due to the Flow-Box Theorem we restrict ourselves to neighborhoods of singularities. In this sense, we characterize Poisson structures around the typical zero-Hopf singulari…
▽ More
Some aspects of the relationship between conservativeness of a dynamical system (namely the preservation of a finite measure) and the existence of a Poisson structure for that system are analyzed. From the local point of view, due to the Flow-Box Theorem we restrict ourselves to neighborhoods of singularities. In this sense, we characterize Poisson structures around the typical zero-Hopf singularity in dimension 3 under the assumption of having a local analytic first integral with non-vanishing first jet by connecting with the classical Poincaré center problem. From the global point of view, we connect the property of being strictly conservative (the invariant measure must be positive) with the existence of a Poisson structure depending on the phase space dimension. Finally, weak conservativeness in dimension two is introduced by the extension of inverse Jacobi multipliers as weak solutions of its defining partial differential equation and some of its applications are developed. Examples including Lotka-Volterra systems, quadratic isochronous centers, and non-smooth oscillators are provided.
△ Less
Submitted 23 October, 2019;
originally announced October 2019.
-
Periodic orbits in analytically perturbed Poisson systems
Authors:
Isaac A. García,
Benito Hernández-Bermejo
Abstract:
Analytical perturbations of a family of finite-dimensional Poisson systems are considered. It is shown that the family is analytically orbitally conjugate in $U \subset \mathbb{R}^n$ to a planar harmonic oscillator defined on the symplectic leaves. As a consequence, the perturbed vector field can be transformed in the domain $U$ to the Lagrange standard form. On the latter, use can be made of aver…
▽ More
Analytical perturbations of a family of finite-dimensional Poisson systems are considered. It is shown that the family is analytically orbitally conjugate in $U \subset \mathbb{R}^n$ to a planar harmonic oscillator defined on the symplectic leaves. As a consequence, the perturbed vector field can be transformed in the domain $U$ to the Lagrange standard form. On the latter, use can be made of averaging theory up to second order to study the existence, number and bifurcation phenomena of periodic orbits. Examples are given ranging from harmonic oscillators with a potential and Duffing oscillators, to a kind of zero-Hopf singularity analytic normal form.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Poisson systems as the natural framework for additional first integrals via Darboux invariant hypersurfaces
Authors:
Isaac A. García,
Benito Hernández-Bermejo
Abstract:
In the literature, the existence of Darboux polynomials and additional polynomial first integrals has been considered in the case of Hamiltonian systems. In this article such problem is formulated in the more general framework of Poisson structures, which include Hamiltonian systems as a particular case. This generalization allows a natural extension of the previous results, which can now be appli…
▽ More
In the literature, the existence of Darboux polynomials and additional polynomial first integrals has been considered in the case of Hamiltonian systems. In this article such problem is formulated in the more general framework of Poisson structures, which include Hamiltonian systems as a particular case. This generalization allows a natural extension of the previous results, which can now be applied to a larger class of vector fields and is valid for arbitrary diffeomorphisms (instead of canonical transformations). Examples are discussed.
△ Less
Submitted 19 October, 2019;
originally announced October 2019.
-
Perturbed Euler top and bifurcation of limit cycles on invariant Casimir surfaces
Authors:
Isaac A. García,
Benito Hernández-Bermejo
Abstract:
Analytical perturbations of the Euler top are considered. The perturbations are based on the Poisson structure for such a dynamical system, in such a way that the Casimir invariants of the system remain invariant for the perturbed flow. By means of the Poincaré-Pontryagin theory, the existence of limit cycles on the invariant Casimir surfaces for the perturbed system is investigated up to first or…
▽ More
Analytical perturbations of the Euler top are considered. The perturbations are based on the Poisson structure for such a dynamical system, in such a way that the Casimir invariants of the system remain invariant for the perturbed flow. By means of the Poincaré-Pontryagin theory, the existence of limit cycles on the invariant Casimir surfaces for the perturbed system is investigated up to first order of perturbation, providing sharp bounds for their number. Examples are given.
△ Less
Submitted 16 October, 2019;
originally announced October 2019.
-
Ge virtual substrates for high efficiency III-V solar cells: applications, potential and challenges
Authors:
Iván García,
Manuel Hinojosa,
Iván Lombardero,
Luis Cifuentes,
Ignacio Rey-Stolle,
Carlos Algora,
Huy Nguyen,
Stuart Edwards,
Aled Morgan,
Andrew Johnson
Abstract:
Virtual substrates based on thin Ge layers on Si by direct deposition have achieved high quality recently. Their application to high efficiency III-V solar cells is analyzed in this work. Replacing traditional Ge substrates with Ge/Si virtual substrates in standard lattice-matched and upright metamorphic GaInP/Ga(In)As/Ge solar cells is feasible according to our calculations using realistic parame…
▽ More
Virtual substrates based on thin Ge layers on Si by direct deposition have achieved high quality recently. Their application to high efficiency III-V solar cells is analyzed in this work. Replacing traditional Ge substrates with Ge/Si virtual substrates in standard lattice-matched and upright metamorphic GaInP/Ga(In)As/Ge solar cells is feasible according to our calculations using realistic parameters of state-of-the-art Ge solar cells but with thin bases (< 5um). The first experimental steps are tackled by implementing Ge single-junction and full GaInP/Ga(In)As/Ge triple-junction solar cells on medium quality Ge/Si virtual substrates with 5um thick Ge layers. The results show that the photocurrent in the Ge bottom cell is barely enough to achieve current matching with the upper subcells, but the overall performance is poor due to low voltages in the junctions. Moreover, observed cracks in the triple-junction structure point to the need to reduce the thickness of the Ge + III-V structure or using other advanced approaches to mitigate the thermal expansion coefficient mismatch effects, such as using embedded porous silicon. Next experimental work will pursue this objective and use more advanced Ge/Si virtual substrates available with lower threading dislocation densities and different Ge thicknesses.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Efficient Simulation of Field/Circuit Coupled Systems with Parallelised Waveform Relaxation
Authors:
Idoia Cortes Garcia,
Iryna Kulchytska-Ruchka,
Sebastian Schöps
Abstract:
This paper proposes an efficient parallelised computation of field/circuit coupled systems co-simulated with the Waveform Relaxation (WR) technique. The main idea of the introduced approach lies in application of the parallel-in-time method parareal to the WR framework. Acceleration obtained by the time-parallelisation is further increased in the context of micro-macro parareal. Here, the field sy…
▽ More
This paper proposes an efficient parallelised computation of field/circuit coupled systems co-simulated with the Waveform Relaxation (WR) technique. The main idea of the introduced approach lies in application of the parallel-in-time method parareal to the WR framework. Acceleration obtained by the time-parallelisation is further increased in the context of micro-macro parareal. Here, the field system is replaced by a lumped model in the circuit environment for the sequential computations of parareal. The introduced algorithm is tested with a model of a single-phase isolation transformer coupled to a rectifier circuit.
△ Less
Submitted 16 March, 2020; v1 submitted 19 September, 2019;
originally announced September 2019.
-
A Coupled A-H Formulation for Magneto-Thermal Transients in High-Temperature Superconducting Magnets
Authors:
Lorenzo Bortot,
Bernhard Auchmann,
Idoia Cortes Garcia,
Herbert De Gersem,
Michał Maciejewski,
Matthias Mentink,
Sebastian Schöps,
Jeroen Van Nugteren,
Arjan Verweij
Abstract:
The application of high-temperature superconductors to accelerator magnets for future particle colliders is under study. Numerical methods are crucial for an accurate evaluation of the complex dynamical behavior of the magnets, especially concerning the magnetic field quality and thermal behavior. We present a coupled $\textbf{A}$-$\textbf{H}$ field formulation for the analysis of magneto-thermal…
▽ More
The application of high-temperature superconductors to accelerator magnets for future particle colliders is under study. Numerical methods are crucial for an accurate evaluation of the complex dynamical behavior of the magnets, especially concerning the magnetic field quality and thermal behavior. We present a coupled $\textbf{A}$-$\textbf{H}$ field formulation for the analysis of magneto-thermal transients in accelerator magnets. The magnetic field strength $\textbf{H}$ accounts for the eddy current problem in the source regions containing the superconducting domains, while the magnetic vector potential $\textbf{A}$ represents the magnetoquasistatic problem in the normal and non-conducting domains. Furthermore, we include a slab approximation for the source regions, making the formulation suitable for large scale models composed of thousands of tapes. In this work, the relevant equations are derived and discussed, with emphasis on the coupling conditions. The weak formulation is derived, and numerical results are provided in order to both, verify the formulation and scale it to the size of an accelerator magnet.
△ Less
Submitted 17 January, 2020; v1 submitted 7 September, 2019;
originally announced September 2019.
-
GAPS: Searching for Dark Matter using Antinuclei in Cosmic Rays
Authors:
R. Bird,
T. Aramaki,
M. Boezio,
S. E. Boggs,
V. Bonvicini,
D. Campana,
W. W. Craig,
E. Everson,
L. Fabris,
H. Fuke,
F. Gahbauer,
I. Garcia,
C. Gerrity,
C. J. Hailey,
T. Hayashi,
C. Kato,
A. Kawachi,
M. Kondo,
M. Kozai,
A. Lowell,
M. Manghisoni,
N. Marcelli,
M. Martucci,
S. I. Mognet,
K. Munakata
, et al. (25 additional authors not shown)
Abstract:
The General Antiparticle Spectrometer (GAPS) will carry out a sensitive dark matter search by measuring low-energy ($\mathrm{E} < 0.25 \mathrm{GeV/nucleon}$) cosmic ray antinuclei. The primary targets are low-energy antideuterons produced in the annihilation or decay of dark matter. At these energies antideuterons from secondary/tertiary interactions are expected to have very low fluxes, significa…
▽ More
The General Antiparticle Spectrometer (GAPS) will carry out a sensitive dark matter search by measuring low-energy ($\mathrm{E} < 0.25 \mathrm{GeV/nucleon}$) cosmic ray antinuclei. The primary targets are low-energy antideuterons produced in the annihilation or decay of dark matter. At these energies antideuterons from secondary/tertiary interactions are expected to have very low fluxes, significantly below those predicted by well-motivated, beyond the standard model theories. GAPS will also conduct low-energy antiproton and antihelium searches. Combined, these observations will provide a powerful search for dark matter and provide the best observations to date on primordial black hole evaporation on Galactic length scales.
The GAPS instrument detects antinuclei using the novel exotic atom technique. It consists of a central tracker with a surrounding time-of-flight (TOF) system. The tracker is a one cubic meter volume containing 10 cm-diameter lithium-drifted silicon (Si(Li)) detectors. The TOF is a plastic scintillator system that will both trigger the Si(Li) tracker and enable better reconstruction of particle tracks. After coming to rest in the tracker, antinuclei will form an excited exotic atom. This will then de-excite via characteristic X-ray transitions before producing a pion/proton star when the antiparticle annihilates with the nucleus. This unique event topology will give GAPS the nearly background-free detection capability required for a rare-event search.
Here we present the scientific motivation for the GAPS experiment, its design and its current status as it prepares for flight in the austral summer of 2021-22.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Systems of Differential Algebraic Equations in Computational Electromagnetics
Authors:
Idoia Cortes Garcia,
Sebastian Schöps,
Herbert De Gersem,
Sascha Baumanns
Abstract:
Starting from space-discretisation of Maxwell's equations, various classical formulations are proposed for the simulation of electromagnetic fields. They differ in the phenomena considered as well as in the variables chosen for discretisation. This contribution presents a literature survey of the most common approximations and formulations with a focus on their structural properties. The different…
▽ More
Starting from space-discretisation of Maxwell's equations, various classical formulations are proposed for the simulation of electromagnetic fields. They differ in the phenomena considered as well as in the variables chosen for discretisation. This contribution presents a literature survey of the most common approximations and formulations with a focus on their structural properties. The differential-algebraic character is discussed and quantified by the differential index concept.
△ Less
Submitted 2 November, 2018; v1 submitted 19 February, 2018;
originally announced February 2018.
-
STEAM: A Hierarchical Co-Simulation Framework for Superconducting Accelerator Magnet Circuits
Authors:
Lorenzo Bortot,
Bernhard Auchmann,
Idoia Cortes Garcia,
Alejando M. Fernando Navarro,
Michał Maciejewski,
Matthias Mentink,
Marco Prioli,
Emmanuele Ravaioli,
Sebastian Schöps,
Arjan Verweij
Abstract:
Simulating the transient effects occurring in superconducting accelerator magnet circuits requires including the mutual electro-thermo-dynamic interaction among the circuit elements, such as power converters, magnets, and protection systems. Nevertheless, the numerical analysis is traditionally done separately for each element in the circuit, leading to possible non-consistent results. We present…
▽ More
Simulating the transient effects occurring in superconducting accelerator magnet circuits requires including the mutual electro-thermo-dynamic interaction among the circuit elements, such as power converters, magnets, and protection systems. Nevertheless, the numerical analysis is traditionally done separately for each element in the circuit, leading to possible non-consistent results. We present STEAM, a hierarchical co-simulation framework featuring the waveform relaxation method. The framework simulates a complex system as a composition of simpler, independent models that exchange information. The convergence of the coupling algorithm ensures the consistency of the solution. The modularity of the framework allows integrating models developed with both proprietary and in-house tools. The framework implements a user-customizable hierarchical algorithm to schedule how models participate to the co-simulation, for the purpose of using computational resources efficiently. As a case study, a quench scenario is co-simulated for the inner triplet circuit for the High Luminosity upgrade of the LHC at CERN.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Coupling of Magneto-Thermal and Mechanical Superconducting Magnet Models by Means of Mesh-Based Interpolation
Authors:
Michał Maciejewski,
Pascal Bayrasy,
Klaus Wolf,
Michał Wilczek,
Bernhard Auchmann,
Tina Griesemer,
Lorenzo Bortot,
Marco Prioli,
Alejandro Manuel Fernandez Navarro,
Sebastian Schöps,
Idoia Cortes Garcia,
Arjan Verweij
Abstract:
In this paper we present an algorithm for the coupling of magneto-thermal and mechanical finite element models representing superconducting accelerator magnets. The mechanical models are used during the design of the mechanical structure as well as the optimization of the magnetic field quality under nominal conditions. The magneto-thermal models allow for the analysis of transient phenomena occur…
▽ More
In this paper we present an algorithm for the coupling of magneto-thermal and mechanical finite element models representing superconducting accelerator magnets. The mechanical models are used during the design of the mechanical structure as well as the optimization of the magnetic field quality under nominal conditions. The magneto-thermal models allow for the analysis of transient phenomena occurring during quench initiation, propagation, and protection. Mechanical analysis of quenching magnets is of high importance considering the design of new protection systems and the study of new superconductor types. We use field/circuit coupling to determine temperature and electromagnetic force evolution during the magnet discharge. These quantities are provided as a load to existing mechanical models. The models are discretized with different meshes and, therefore, we employ a mesh-based interpolation method to exchange coupled quantities. The coupling algorithm is illustrated with a simulation of a mechanical response of a standalone high-field dipole magnet protected with CLIQ (Coupling-Loss Induced Quench) technology.
△ Less
Submitted 29 December, 2017;
originally announced December 2017.
-
Reduced Order Modelling for the Simulation of Quenches in Superconducting Magnets
Authors:
Sebastian Schöps,
Idoia Cortes Garcia,
Michał Maciejewski,
Bernhard Auchmann
Abstract:
This contributions discusses the simulation of magnetothermal effects in superconducting magnets as used in particle accelerators. An iterative coupling scheme using reduced order models between a magnetothermal partial differential model and an electrical lumped-element circuit is demonstrated. The multiphysics, multirate and multiscale problem requires a consistent formulation and framework to t…
▽ More
This contributions discusses the simulation of magnetothermal effects in superconducting magnets as used in particle accelerators. An iterative coupling scheme using reduced order models between a magnetothermal partial differential model and an electrical lumped-element circuit is demonstrated. The multiphysics, multirate and multiscale problem requires a consistent formulation and framework to tackle the challenging transient effects occurring at both system and device level.
△ Less
Submitted 13 October, 2017;
originally announced October 2017.
-
A 2-D Finite-Element Model for Electro-Thermal Transients in Accelerator Magnets
Authors:
Lorenzo Bortot,
Bernhard Auchmann,
Idoia Cortes Garcia,
Alejandro Manuel Fernandez Navarro,
Michal Maciejewski,
Marco Prioli,
Sebastian Schöps,
Arjan Verweij
Abstract:
Superconducting accelerator magnets require sophisticated monitoring and means of protection due to the large energy stored in the magnetic field. Numerical simulations play a crucial role in understanding transient phenomena occurring within the magnet, and can, therefore, help to prevent disruptive consequences. We present a 2-D FEM model for the simulation of electro-thermal transients occurrin…
▽ More
Superconducting accelerator magnets require sophisticated monitoring and means of protection due to the large energy stored in the magnetic field. Numerical simulations play a crucial role in understanding transient phenomena occurring within the magnet, and can, therefore, help to prevent disruptive consequences. We present a 2-D FEM model for the simulation of electro-thermal transients occurring in superconducting accelerator magnets. The magnetoquasistatic problem is solved with a modified magnetic vector potential formulation, where the cable eddy currents are resolved in terms of their equivalent magnetization. The heat balance equation is then investigated, and the relevant heat sources are discussed. The model implements a two-port component interface and is resolved, as part of an electrical circuit, in a cooperative simulation scheme with a lumped-parameter network.
△ Less
Submitted 5 December, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Application of the Waveform Relaxation Technique to the Co-Simulation of Power Converter Controller and Electrical Circuit Models
Authors:
Michał Maciejewski,
Idoia Cortes Garcia,
Sebastian Schöps,
Bernhard Auchmann,
Lorenzo Bortot,
Marco Prioli,
Arjan Verweij
Abstract:
In this paper we present the co-simulation of a PID class power converter controller and an electrical circuit by means of the waveform relaxation technique. The simulation of the controller model is characterized by a fixed-time step** scheme reflecting its digital implementation, whereas a circuit simulation usually employs an adaptive time step** scheme in order to account for a wide range…
▽ More
In this paper we present the co-simulation of a PID class power converter controller and an electrical circuit by means of the waveform relaxation technique. The simulation of the controller model is characterized by a fixed-time step** scheme reflecting its digital implementation, whereas a circuit simulation usually employs an adaptive time step** scheme in order to account for a wide range of time constants within the circuit model. In order to maintain the characteristic of both models as well as to facilitate model replacement, we treat them separately by means of input/output relations and propose an application of a waveform relaxation algorithm. Furthermore, the maximum and minimum number of iterations of the proposed algorithm are mathematically analyzed. The concept of controller/circuit coupling is illustrated by an example of the co-simulation of a PI power converter controller and a model of the main dipole circuit of the Large Hadron Collider.
△ Less
Submitted 10 April, 2017;
originally announced April 2017.
-
Optimized Field/Circuit Coupling for the Simulation of Quenches in Superconducting Magnets
Authors:
Idoia Cortes Garcia,
Sebastian Schöps,
Michał Maciejewski,
Lorenzo Bortot,
Marco Prioli,
Bernhard Auchmann,
Arjan Verweij
Abstract:
In this paper, we propose an optimized field/circuit coupling approach for the simulation of magnetothermal transients in superconducting magnets. The approach improves the convergence of the iterative coupling scheme between a magnetothermal partial differential model and an electrical lumped-element circuit. Such a multi-physics, multi-rate and multi-scale problem requires a consistent formulati…
▽ More
In this paper, we propose an optimized field/circuit coupling approach for the simulation of magnetothermal transients in superconducting magnets. The approach improves the convergence of the iterative coupling scheme between a magnetothermal partial differential model and an electrical lumped-element circuit. Such a multi-physics, multi-rate and multi-scale problem requires a consistent formulation and a dedicated framework to tackle the challenging transient effects occurring at both circuit and magnet level during normal operation and in case of faults. We derive an equivalent magnet model at the circuit side for the linear and the non-linear settings and discuss the convergence of the overall scheme in the framework of optimized Schwarz methods. The efficiency of the developed approach is illustrated by a numerical example of an accelerator dipole magnet with accompanying protection system.
△ Less
Submitted 6 July, 2017; v1 submitted 3 February, 2017;
originally announced February 2017.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
Integrated cooling channels in position-sensitive silicon detectors
Authors:
L. Andricek,
M. Boronat,
J. Fuster,
I. Garcia,
P. Gomis,
C. Marinas,
J. Ninkovic,
M. Perello Rosello,
M. A. Villarejo,
M. Vos
Abstract:
We present an approach to construct position-sensitive silicon detectors with an integrated cooling circuit. Tests on samples demonstrate that a very modest liquid flow very effectively cool the devices up to a power dissipation of over 10~W/cm$^2$. The liquid flow is found to have a negligible impact on the mechanical performance. A finite-element simulation predicts the cooling performance to an…
▽ More
We present an approach to construct position-sensitive silicon detectors with an integrated cooling circuit. Tests on samples demonstrate that a very modest liquid flow very effectively cool the devices up to a power dissipation of over 10~W/cm$^2$. The liquid flow is found to have a negligible impact on the mechanical performance. A finite-element simulation predicts the cooling performance to an accuracy of approximately 10~\%.
△ Less
Submitted 13 May, 2016; v1 submitted 29 April, 2016;
originally announced April 2016.
-
Magneto-electrical orientation of lipid-coated graphitic micro-particles in solution
Authors:
Johnny Nguyen,
Sonia Contera,
Isabel Llorente Garcia
Abstract:
We demonstrate, for the first time, confinement of the orientation of micron-sized graphitic flakes to a well-defined plane. We orient and rotationally trap lipid-coated highly ordered pyrolytic graphite (HOPG) micro-flakes in aqueous solution using a combination of uniform magnetic and AC electric fields and exploiting the anisotropic diamagnetic and electrical properties of HOPG. Measuring the r…
▽ More
We demonstrate, for the first time, confinement of the orientation of micron-sized graphitic flakes to a well-defined plane. We orient and rotationally trap lipid-coated highly ordered pyrolytic graphite (HOPG) micro-flakes in aqueous solution using a combination of uniform magnetic and AC electric fields and exploiting the anisotropic diamagnetic and electrical properties of HOPG. Measuring the rotational Brownian fluctuations of individual oriented particles in rotational traps, we quantitatively determine the rotational trap stiffness, maximum applied torque and polarization anisotropy of the micro-flakes, as well as their dependency on the electric field frequency. Additionally, we quantify interactions of the micro-particles with adjacent glass surfaces with various surface treatments. We outline the various applications of this work, including torque sensing in biological systems.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
Physical limitations to the spatial resolution of solid-state detectors
Authors:
M. Boronat,
C. Marinas,
A. Frey,
I. Garcia,
B. Schwenker,
M. Vos,
F. Wilk
Abstract:
In this paper we explore the effect of $δ$-ray emission, fluctuations in th e signal deposition on the detection of charged particles in silicon-based detec tors. We show that these two effects ultimately limit the resolution that can be achieved by interpolation of the signal in finely segmented position-sensitive solid-state devices.
In this paper we explore the effect of $δ$-ray emission, fluctuations in th e signal deposition on the detection of charged particles in silicon-based detec tors. We show that these two effects ultimately limit the resolution that can be achieved by interpolation of the signal in finely segmented position-sensitive solid-state devices.
△ Less
Submitted 10 November, 2014; v1 submitted 17 April, 2014;
originally announced April 2014.
-
Shaking-induced dynamics of cold atoms in magnetic traps
Authors:
I. Llorente García,
B. Darquié,
C. D. J. Sinclair,
E. A. Curtis,
M. Tachikawa,
J. J. Hudson,
E. A. Hinds
Abstract:
We describe an experiment in which cold rubidium atoms, confined in an elongated magnetic trap, are excited by transverse oscillation of the trap centre. The temperature after excitation exhibits resonance as a function of the driving frequency. We measure these resonances at several different trap frequencies. In order to interpret the experiments, we develop a simple model that incorporates both…
▽ More
We describe an experiment in which cold rubidium atoms, confined in an elongated magnetic trap, are excited by transverse oscillation of the trap centre. The temperature after excitation exhibits resonance as a function of the driving frequency. We measure these resonances at several different trap frequencies. In order to interpret the experiments, we develop a simple model that incorporates both collisions between atoms and the anharmonicity of the real three-dimensional trap** potential. As well as providing a precise connection between the transverse harmonic oscillation frequency and the temperature resonance frequency, this model gives insight into the heating and loss mechanisms, and into the dynamics of driven clouds of cold trapped atoms.
△ Less
Submitted 26 August, 2013;
originally announced August 2013.
-
Physics at the CLIC e+e- Linear Collider -- Input to the Snowmass process 2013
Authors:
Halina Abramowicz,
Angel Abusleme,
Konstatin Afanaciev,
Gideon Alexander,
Niloufar Alipour Tehrani,
Oscar Alonso,
Kristoffer K. Andersen,
Samir Arfaoui,
Csaba Balazs,
Tim Barklow,
Marco Battaglia,
Mathieu Benoit,
Burak Bilki,
Jean-Jacques Blaising,
Mark Boland,
Marça Boronat,
Ivanka Božović Jelisavčić,
Philip Burrows,
Maximilien Chefdeville,
Roberto Contino,
Dominik Dannheim,
Marcel Demarteau,
Marco Aurelio Diaz Gutierrez,
Angel Diéguez,
Jorge Duarte Campderros
, et al. (98 additional authors not shown)
Abstract:
This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accomp…
▽ More
This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accompanied by a paper describing the CLIC accelerator study, submitted to the Frontier Capabilities group of the Snowmass process.
△ Less
Submitted 30 September, 2013; v1 submitted 19 July, 2013;
originally announced July 2013.
-
DEPFET active pixel detectors for a future linear $e^+e^-$ collider
Authors:
O. Alonso,
R. Casanova,
A. Dieguez,
J. Dingfelder,
T. Hemperek,
T. Kishishita amd T. Kleinohl,
M. Koch,
H. Krueger,
M. Lemarenko,
F. Luetticke,
C. Marinas,
M. Schnell,
N. Wermes,
A. Campbell,
T. Ferber,
C. Kleinwort,
C. Niebuhr,
Y. Soloviev,
M. Steder,
R. Volkenborn,
S. Yaschenko,
P. Fischer,
C. Kreidl,
I. Peric,
J. Knopf
, et al. (62 additional authors not shown)
Abstract:
The DEPFET collaboration develops highly granular, ultra-transparent active pixel detectors for high-performance vertex reconstruction at future collider experiments. The characterization of detector prototypes has proven that the key principle, the integration of a first amplification stage in a detector-grade sensor material, can provide a comfortable signal to noise ratio of over 40 for a senso…
▽ More
The DEPFET collaboration develops highly granular, ultra-transparent active pixel detectors for high-performance vertex reconstruction at future collider experiments. The characterization of detector prototypes has proven that the key principle, the integration of a first amplification stage in a detector-grade sensor material, can provide a comfortable signal to noise ratio of over 40 for a sensor thickness of 50-75 $\mathrm{\mathbf{μm}}$. ASICs have been designed and produced to operate a DEPFET pixel detector with the required read-out speed. A complete detector concept is being developed, including solutions for mechanical support, cooling and services. In this paper the status of DEPFET R & D project is reviewed in the light of the requirements of the vertex detector at a future linear $\mathbf{e^+ e^-}$ collider.
△ Less
Submitted 10 December, 2012;
originally announced December 2012.
-
Structural and Dynamical Patterns on Online Social Networks: the Spanish May 15th Movement as a case study
Authors:
Javier Borge-Holthoefer,
Alejandro Rivero,
Iñigo García,
Elisa Cauhé,
Alfredo Ferrer,
Darío Ferrer,
David Francos,
David Iñiguez,
María Pilar Pérez,
Gonzalo Ruiz,
Francisco Sanz,
Fermín Serrano,
Cristina Viñas,
Alfonso Tarancón,
Yamir Moreno
Abstract:
The number of people using online social networks in their everyday life is continuously growing at a pace never saw before. This new kind of communication has an enormous impact on opinions, cultural trends, information spreading and even in the commercial success of new products. More importantly, social online networks have revealed as a fundamental organizing mechanism in recent country-wide s…
▽ More
The number of people using online social networks in their everyday life is continuously growing at a pace never saw before. This new kind of communication has an enormous impact on opinions, cultural trends, information spreading and even in the commercial success of new products. More importantly, social online networks have revealed as a fundamental organizing mechanism in recent country-wide social movements. In this paper, we provide a quantitative analysis of the structural and dynamical patterns emerging from the activity of an online social network around the ongoing May 15th (15M) movement in Spain. Our network is made up by users that exchanged tweets in a time period of one month, which includes the birth and stabilization of the 15M movement. We characterize in depth the growth of such dynamical network and find that it is scale-free with communities at the mesoscale. We also find that its dynamics exhibits typical features of critical systems such as robustness and power-law distributions for several quantities. Remarkably, we report that the patterns characterizing the spreading dynamics are asymmetric, giving rise to a clear distinction between information sources and sinks. Our study represent a first step towards the use of data from online social media to comprehend modern societal dynamics.
△ Less
Submitted 8 July, 2011;
originally announced July 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Experiments on a videotape atom chip: fragmentation and transport studies
Authors:
I. Llorente Garcia,
B. Darquie,
E. A. Curtis,
C. D. J. Sinclair,
E. A. Hinds
Abstract:
This paper reports on experiments with ultra-cold rubidium atoms confined in microscopic magnetic traps created using a piece of periodically-magnetized videotape mounted on an atom chip. The roughness of the confining potential is studied with atomic clouds at temperatures of a few microKelvin and at distances between 30 and 80 microns from the videotape-chip surface. The inhomogeneities in the m…
▽ More
This paper reports on experiments with ultra-cold rubidium atoms confined in microscopic magnetic traps created using a piece of periodically-magnetized videotape mounted on an atom chip. The roughness of the confining potential is studied with atomic clouds at temperatures of a few microKelvin and at distances between 30 and 80 microns from the videotape-chip surface. The inhomogeneities in the magnetic field created by the magnetized videotape close to the central region of the chip are characterized in this way. In addition, we demonstrate a novel transport mechanism whereby we convey cold atoms confined in arrays of videotape magnetic micro-traps over distances as large as ~ 1 cm parallel to the chip surface. This conveying mechanism enables us to survey the surface of the chip and observe potential-roughness effects across different regions.
△ Less
Submitted 23 March, 2010;
originally announced March 2010.