Showing 1–50 of 64 results for author: Gao, C

Visible, Near-, and Mid-infrared Computational Spectrometer Enabled by Single-Spinning Film Encoder

Authors: Junren Wen, Weiming Shi, Cheng Gao, Yujie Liu, Shuaibo Feng, Yu Shao, Haiqi Gao, Yuchuan Shao, Yueguang Zhang, Weidong Shen, Chenying Yang

Abstract: Computational spectrometers are pivotal in enabling low-cost, in-situ and rapid spectral analysis, with potential applications in chemistry, biology, and environmental science. However, filter-based spectral encoding approaches typically use filter arrays, complicating the manufacturing process and hindering device consistency. By capitalizing on the polarization separation effect under oblique in… ▽ More Computational spectrometers are pivotal in enabling low-cost, in-situ and rapid spectral analysis, with potential applications in chemistry, biology, and environmental science. However, filter-based spectral encoding approaches typically use filter arrays, complicating the manufacturing process and hindering device consistency. By capitalizing on the polarization separation effect under oblique incidence (PSEOI), we pioneer the use of a single filter for highly efficient spectral encoding, and propose a novel computational spectrometer spanning visible to mid-infrared wavelengths by combining the Single-Spinning Film Encoder (SSFE) with deep learning-based reconstruction algorithm. The particle swarm optimization (PSO) method is employed to optimize the film configuration of SSFE, achieving low-correlation and high-complexity spectral responses under different polarizations and spinning angles, thereby enhancing both spectral resolution and accuracy of reconstruction across diverse spectral ranges. Spectral resolutions up to 0.5 nm, 2 nm, 10 nm can be realized for single-peak narrowband spectra, and 3 nm, 6 nm, 20 nm for dual-peak narrowband spectra, over the visible, near-, and mid-infrared wavelength ranges, respectively. Moreover, the proposed spectrometer demonstrates an overall 81.38% precision for the classification of 220 chemical compounds, confirming its robustness and precision in practical scenarios, along with the capability for compact, cost-effective spectroscopic solutions. △ Less

Submitted 3 July, 2024; originally announced July 2024.

Data quality control system and long-term performance monitor of the LHAASO-KM2A

Authors: Zhen Cao, F. Aharonian, Axikegu, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, W. Bian, A. V. Bukevich, Q. Cao, W. Y. Cao, Zhe Cao, J. Chang, J. F. Chang, A. M. Chen, E. S. Chen, H. X. Chen, Liang Chen, Lin Chen, Long Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. Chen , et al. (263 additional authors not shown)

Abstract: The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To… ▽ More The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively. △ Less

Submitted 13 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Comments: 15 pages, 9 figures

Revisiting first-principles thermodynamics by quasiharmonic approach: Application to study thermal expansion of additively-manufactured Inconel 625

Authors: Shun-Li Shang, Rushi Gong, Michael C. Gao, Darren C. Pagan, Zi-Kui Liu

Abstract: An innovative method is developed for accurate determination of thermodynamic properties as a function of temperature by revisiting the density functional theory (DFT) based quasiharmonic approach (QHA). The present methodology individually evaluates the contributions from static total energy, phonon, and thermal electron to free energy for increased efficiency and accuracy. The Akaike information… ▽ More An innovative method is developed for accurate determination of thermodynamic properties as a function of temperature by revisiting the density functional theory (DFT) based quasiharmonic approach (QHA). The present methodology individually evaluates the contributions from static total energy, phonon, and thermal electron to free energy for increased efficiency and accuracy. The Akaike information criterion with a correction (AICc) is used to select models and model parameters for fitting each contribution as a function of volume. Using the additively manufactured Inconel alloy 625 (IN625) as an example, predicted temperature-dependent linear coefficient of thermal expansion (CTE) agrees well with dilatometer measurements and values in the literature. Sensitivity and uncertainty are also analyzed for the predicted IN625 CTE due to different structural configurations used by DFT, and hence different equilibrium properties determined. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: This manuscript includes both the main text and the supplementary material, but without the supplementary Excel file

Information Processing in Hybrid Photonic Electrical Reservoir Computing

Authors: Prabhav Gaur, Chengkuan Gao, Karl Johnson, Shimon Rubin, Yeshaiahu Fainman, Tzu-Chien Hsueh

Abstract: Physical Reservoir Computing (PRC) is a recently developed variant of Neuromorphic Computing, where a pertinent physical system effectively projects information encoded in the input signal into a higher-dimensional space. While various physical hardware has demonstrated promising results for Reservoir Computing (RC), systems allowing tunability of their dynamical regimes have not received much att… ▽ More Physical Reservoir Computing (PRC) is a recently developed variant of Neuromorphic Computing, where a pertinent physical system effectively projects information encoded in the input signal into a higher-dimensional space. While various physical hardware has demonstrated promising results for Reservoir Computing (RC), systems allowing tunability of their dynamical regimes have not received much attention regarding how to optimize relevant system parameters. In this work we employ hybrid photonic-electronic (HPE) system offering both parallelism inherent to light propagation, and electronic memory and programmable feedback allowing to induce nonlinear dynamics and tunable encoding of the photonic signal to realize HPE-RC. Specifically, we experimentally and theoretically analyze performance of integrated silicon photonic on-chip Mach-Zehnder interferometer and ring resonators with heaters acting as programmable phase modulators, controlled by detector and the feedback unit capable of realizing complex temporal dynamics of the photonic signal. Furthermore, we present an algorithm capable of predicting optimal parameters for RC by analyzing the corresponding Lyapunov exponent of the output signal and mutual information of reservoir nodes. By implementing the derived optimal parameters, we demonstrate that the corresponding resulting error of RC can be lowered by several orders of magnitude compared to a reservoir operating with randomly chosen set of parameters. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Dark Matter Searches on a Photonic Chip

Authors: Nikita Blinov, Christina Gao, Roni Harnik, Ryan Janish, Neil Sinclair

Abstract: Dark matter (DM) with masses of order an electronvolt or below can have a non-zero coupling to electromagnetism. In these models, the ambient DM behaves as a new classical source in Maxwell's equations, which can excite potentially detectable electromagnetic (EM) fields in the laboratory. We describe a new proposal for using integrated photonics to search for such DM candidates with masses in the… ▽ More Dark matter (DM) with masses of order an electronvolt or below can have a non-zero coupling to electromagnetism. In these models, the ambient DM behaves as a new classical source in Maxwell's equations, which can excite potentially detectable electromagnetic (EM) fields in the laboratory. We describe a new proposal for using integrated photonics to search for such DM candidates with masses in the 0.1 eV - few eV range. This approach offers a wide range of wavelength-scale devices like resonators and waveguides that can enable a novel and exciting experimental program. In particular, we show how refractive index-modulated resonators, such as grooved or periodically-poled microrings, or patterned slabs, support EM modes with efficient coupling to DM. When excited by the DM, these modes can be read out by coupling the resonators to a waveguide that terminates on a micron-scale-sized single photon detector, such as a single pixel of an ultra-quiet charge-coupled device or a superconducting nanowire. We then estimate the sensitivity of this experimental concept in the context of axion-like particle and dark photon models of DM, showing that the scaling and confinement advantages of nanophotonics may enable exploration of new DM parameter space. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 26 pages, 12 figures

Report number: FERMILAB-PUB-24-0034-T

Coherence memory and amnesia in a mode-locked laser

Authors: Bo Cao, Zhongshu Liu, Chenxin Gao, Changxi Yang, Chengying Bao

Abstract: Self-organization of temporal modes in mode-locked lasers usually starts from quantum noise. In this process, incoherent spontaneous emission is steered into coherent ultrashort pulses by dissipation and nonlinearity. In this work, we investigated self-organization dynamics in a mode-locked Mamyshev oscillator starting from coherent pulse seeds as opposed to quantum noise. We observed that the coh… ▽ More Self-organization of temporal modes in mode-locked lasers usually starts from quantum noise. In this process, incoherent spontaneous emission is steered into coherent ultrashort pulses by dissipation and nonlinearity. In this work, we investigated self-organization dynamics in a mode-locked Mamyshev oscillator starting from coherent pulse seeds as opposed to quantum noise. We observed that the coherence of the seed can be remembered or forgotten depending on the initial inverse population. The excessive nonlinearity in the coherence amnesia regime can devastate the seed coherence, causing the oscillator to undergo a chaotic transition lasting hundreds of round trips before regaining coherence. Conversely, the oscillator converges in only a few round trips for the coherence memory regime. A heterodyne technique was developed to record the fast varying optical phase and characterize these two regimes. Dissipative soliton molecules were synthesized from external pulse pair seeds via the coherence memory pathway. In this case, a plateau of the generated pulse spacing independent from seed pulse spacing, i.e., amnesia of the seed spacing, was observed for close spaced seed pulse pairs. Moreover, we show that pulse seeds can be used for laser reconfiguration and pulse pattern control. Our work paves a way to control transient pulse dynamics and steady pulse forms on demand in mode-locked lasers. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Phase offset method of ptychographic contrast reversal correction

Authors: Christoph Hofer, Chuang Gao, Tamazouzt Chennit, Biao Yuan, Timothy J. Pennycook

Abstract: The contrast transfer function of direct ptychography methods such as the single side band (SSB) method are single signed, yet these methods still sometimes exhibit contrast reversals, most often where the projected potentials are strong. In thicker samples central focusing often provides the best ptychographic contrast as this leads to defocus variations within the sample canceling out. However f… ▽ More The contrast transfer function of direct ptychography methods such as the single side band (SSB) method are single signed, yet these methods still sometimes exhibit contrast reversals, most often where the projected potentials are strong. In thicker samples central focusing often provides the best ptychographic contrast as this leads to defocus variations within the sample canceling out. However focusing away from the entrance surface is often undesirable as this degrades the annular dark field (ADF) signal. Here we discuss how phase wrap asymptotes in the frequency response of SSB ptychography give rise to contrast reversals, without the need for dynamical scattering, and how these can be counteracted by manipulating the phases such that the asymptotes are either shifted to higher frequencies or damped via amplitude modulation. This is what enables post collection defocus correction of contrast reversals. However, the phase offset method of counteracting contrast reversals we introduce here is generally found to be superior to post collection application of defocus, with greater reliability and generally stronger contrast. Importantly, the phase offset method also works for thin and thick samples where central focusing does not. Finally, the independence of the method from focus is useful for optical sectioning involving ptychography, improving interpretability by better disentangling the effects of strong potentials and focus. △ Less

Submitted 21 December, 2023; v1 submitted 12 October, 2023; originally announced October 2023.

On central focusing for contrast optimization in direct electron ptychography of thick samples

Authors: C. Gao, C. Hofer, T. J. Pennycook

Abstract: Ptychography provides high dose efficiency images that can reveal light elements next to heavy atoms. However, despite ptychography having an otherwise single signed contrast transfer function, contrast reversals can occur when the projected potential becomes strong for both direct and iterative inversion ptychography methods. It has recently been shown that these reversals can often be counteract… ▽ More Ptychography provides high dose efficiency images that can reveal light elements next to heavy atoms. However, despite ptychography having an otherwise single signed contrast transfer function, contrast reversals can occur when the projected potential becomes strong for both direct and iterative inversion ptychography methods. It has recently been shown that these reversals can often be counteracted in direct ptychography methods by adapting the focus. Here we provide an explanation of why the best contrast is often found with the probe focused to the middle of the sample. The phase contribution due to defocus at each sample slice above and below the central plane in this configuration effectively cancels out, which can prevent contrast reversals when dynamical scattering effects are not overly strong. In addition we show that the convergence angle can be an important consideration for removal of contrast reversals in relatively thin samples. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Iterative fluctuation ghost imaging

Authors: Huan Zhao, Xiao-Qian Wang, Chao Gao, Zhuo Yu, Hong Wang, Yu Wang, Li-Dan Gou, Zhi-Hai Yao

Abstract: We present a new technique, iterative fluctuation ghost imaging (IFGI) which dramatically enhances the resolution of ghost imaging (GI). It is shown that, by the fluctuation characteristics of the second-order correlation function, the imaging information with the narrower point spread function (PSF) than the original information can be got. The effects arising from the PSF and the iteration times… ▽ More We present a new technique, iterative fluctuation ghost imaging (IFGI) which dramatically enhances the resolution of ghost imaging (GI). It is shown that, by the fluctuation characteristics of the second-order correlation function, the imaging information with the narrower point spread function (PSF) than the original information can be got. The effects arising from the PSF and the iteration times also be discussed. △ Less

Submitted 22 April, 2023; originally announced April 2023.

NvDEx-100 Conceptual Design Report

Authors: X. Cao, Y. Chang, K. Chen, E. Ciuffoli, L. Duan, D. Fang, C. Gao, S. K. Ghorui, P. Hu, Q. Hu, S. Huang, Z. Huang, L. Lang, Y. Li, Z. Li, T. Liang, J. Liu, C. Lu, F. Mai, Y. Mei, H. Qiu, X. Sun, X. Tang, H. Wang, Q. Wang , et al. (12 additional authors not shown)

Abstract: Observing nuclear neutrinoless double beta (0vbb) decay would be a revolutionary result in particle physics. Observing such a decay would prove that the neutrinos are their own antiparticles, help to study the absolute mass of neutrinos, explore the origin of their mass, and may explain the matter-antimatter asymmetry in our universe by lepton number violation. We propose develo** a time proje… ▽ More Observing nuclear neutrinoless double beta (0vbb) decay would be a revolutionary result in particle physics. Observing such a decay would prove that the neutrinos are their own antiparticles, help to study the absolute mass of neutrinos, explore the origin of their mass, and may explain the matter-antimatter asymmetry in our universe by lepton number violation. We propose develo** a time projection chamber (TPC) using high-pressure 82SeF6 gas and top-metal silicon sensors for read-out in the China **** Underground Laboratory (CJPL) to search for neutrinoless double beta decay of 82Se, called the NvDEx experiment. Besides being located at CJPL with the world's thickest rock shielding, NvDEx combines the advantages of the high Qbb (2.996 MeV) of 82Se and the TPC's ability to distinguish signal and background events using their different topological characteristics. This makes NvDEx unique, with great potential for low-background and high-sensitivity 0vbb searches. NvDEx-100, a NvDEx experiment phase with 100 kg of SeF6 gas, is being built, with plans to complete installation at CJPL by 2025. This report introduces 0vbb physics, the NvDEx concept and its advantages, and the schematic design of NvDEx-100, its subsystems, and background and sensitivity estimation. △ Less

Submitted 1 December, 2023; v1 submitted 17 April, 2023; originally announced April 2023.

Journal ref: Nuclear Science and Techniques (2024) 35:3

Optofluidic memory and self-induced nonlinear optical phase change for reservoir computing in silicon photonics

Authors: Chengkuan Gao, Prabhav Gaur, Dhaifallah Almutairi, Shimon Rubin, Yeshaiahu Fainman

Abstract: Implementing optical-based memory and utilizing it for computation on the nanoscale remains an attractive but still a challenging task. While significant progress was achieved in nanophotonics, allowing to explore nonlinear optical effects and employ light-matter interaction to realize non-conventional memory and computation capabilities, light-liquid interaction was not considered so far as a pot… ▽ More Implementing optical-based memory and utilizing it for computation on the nanoscale remains an attractive but still a challenging task. While significant progress was achieved in nanophotonics, allowing to explore nonlinear optical effects and employ light-matter interaction to realize non-conventional memory and computation capabilities, light-liquid interaction was not considered so far as a potential physical mechanism to achieve computation on nanoscale. Here, we experimentally demonstrate self-induced phase change effect which relies on the coupling between geometry changes of thin liquid film to optical properties of photonic modes, and then employ it for neuromorphic computing. In particular, we employ optofluidic Silicon Photonics system in order to demonstrate thermocapillary-based deformation of thin liquid film capable of operating both as a nonlinear actuator and memory element, both residing at the same compact spatial region, thus realizing beyond von Neumann computational architecture. Our experimental results indicate that the magnitude of the nonlinear effect is more than one order of magnitude higher compared to the more traditional heat-based thermo-optical effect, capable to support optically-driven periodic deformation of frequencies of several kHz, and furthermore allows to implement Reservoir Computing at spatial region which is approximately five orders of magnitude smaller compared to state-of-the-art experimental liquid-based systems. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Comments: 23 pages, 5 figures

Integrated vortex soliton microcombs

Authors: Yanwu Liu, Chenghao Lao, Min Wang, Yinke Cheng, Shiyao Fu, Chunqing Gao, Jianwei Wang, Bei-Bei Li, Qihuang Gong, Yun-Feng Xiao, Wen**g Liu, Qi-Fan Yang

Abstract: The frequency and orbital angular momentum (OAM) are independent physical properties of light that both offer unbounded degrees of freedom. However, creating, processing, and detecting high-dimensional OAM states have been a pivot and long-lasting task, as the complexity of the required optical systems scales up drastically with the OAM dimension. On the other hand, mature toolboxes -- such as opt… ▽ More The frequency and orbital angular momentum (OAM) are independent physical properties of light that both offer unbounded degrees of freedom. However, creating, processing, and detecting high-dimensional OAM states have been a pivot and long-lasting task, as the complexity of the required optical systems scales up drastically with the OAM dimension. On the other hand, mature toolboxes -- such as optical frequency combs -- have been developed in the frequency domain for parallel measurements with excellent fidelity. Here we correlate the two dimensions into an equidistant comb structure on a photonic chip. Dissipative optical solitons formed in a nonlinear microresonator are emitted through the engraved angular gratings with each comb line carrying distinct OAM. Such one-to-one correspondence between the OAM and frequencies manifests state-of-the-art extinction ratios over 18.5 dB, enabling precision spectroscopy of optical vortices. The demonstrated vortex soliton microcombs provide coherent light sources that are multiplexed in the spatial and frequency domain, having the potential to establish a new modus operandi of high-dimensional structured light. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Characterizing human collective behaviours of COVID-19 in Hong Kong

Authors: Zhanwei Du, Xiao Zhang, Lin Wang, Sidan Yao, Yuan Bai, Qi Tan, Xiaoke Xu, Sen Pei, **gyi Xiao, Tim K. Tsang, Qiuyan Liao, Eric Lau, Peng Wu, Chao Gao, Benjamin J Cowling

Abstract: People are likely to engage in collective behaviour online during extreme events, such as the COVID-19 crisis, to express their awareness, actions and concerns. Hong Kong has implemented stringent public health and social measures (PHSMs) to curb COVID-19 epidemic waves since the first COVID-19 case was confirmed on 22 January 2020. People are likely to engage in collective behaviour online during… ▽ More People are likely to engage in collective behaviour online during extreme events, such as the COVID-19 crisis, to express their awareness, actions and concerns. Hong Kong has implemented stringent public health and social measures (PHSMs) to curb COVID-19 epidemic waves since the first COVID-19 case was confirmed on 22 January 2020. People are likely to engage in collective behaviour online during extreme events, such as the COVID-19 crisis, to express their awareness, actions and concerns. Here, we offer a framework to evaluate interactions among individuals emotions, perception, and online behaviours in Hong Kong during the first two waves (February to June 2020) and found a strong correlation between online behaviours of Google search and the real-time reproduction numbers. To validate the model output of risk perception, we conducted 10 rounds of cross-sectional telephone surveys from February 1 through June 20 in 2020 to quantify risk perception levels over time. Compared with the survey results, the estimates of the risk perception of individuals using our network-based mechanistic model capture 80% of the trend of people risk perception (individuals who worried about being infected) during the studied period. We may need to reinvigorate the public by engaging people as part of the solution to live their lives with reduced risk. △ Less

Submitted 10 December, 2022; originally announced December 2022.

CMOS based high-resolution dynamic X-ray imaging with inorganic perovskite

Authors: Yanliang Liu, Chaosong Gao, Jiongtao Zhu, Xin Zhang, Meng Wu, Ting Su, Jiahong Wang, Zonghai Sheng, Wenjun Liu, Tongyu Shi, Xingchen He, Dong Liang, Hairong Zheng, Xue-Feng Yu, Xiangming Sun, Yongshuai Ge

Abstract: High-resolution dynamic X-ray detector is crucial for time-resolved digital radiography (DR) imaging and fast 3D medical computed tomography (CT) imaging. Recently, perovskites have become promising alternatives to conventional semi-conductor materials, e.g., Si, a-Se and CdTe, for direct X-ray detection. However, the feasibility of their combination with high-speed pixelated complementary metal-o… ▽ More High-resolution dynamic X-ray detector is crucial for time-resolved digital radiography (DR) imaging and fast 3D medical computed tomography (CT) imaging. Recently, perovskites have become promising alternatives to conventional semi-conductor materials, e.g., Si, a-Se and CdTe, for direct X-ray detection. However, the feasibility of their combination with high-speed pixelated complementary metal-oxide-semiconductor (CMOS) arrays remains unknown. This work originally reports an innovative direct-conversion X-ray detector fabricated with 300 micrometer thick inorganic perovskite film printed on a tailored CMOS array. In-house measurements demonstrate that the CsPbBr3 film has excellent optoelectric properties of an electron mobility-lifetime product of 3.40x10$^{-5}$ cm$^2$ V$^{-1}$, and the X-ray detector exhibits high sensitivity of 9341uC Gy$_{\rm air}^{-1}$ cm$^{-2}$, and low detection limit of 588 nGy$_{\rm air}^{-1}$. This CMOS X-ray imaging detector achieves a high spatial resolution up to 5.5 lp/mm (close to the resolution limit of 6.0 lp/mm), and >300 frame per second (fps) readout speed. DR image of a resolution pattern phantom and a anesthesia mice, CT images of a biological specimen are acquired for the first time. △ Less

Submitted 5 October, 2022; originally announced October 2022.

A comparative study on different background estimation methods for extensive air shower arrays

Authors: Yan-** Wang, Min Zha, Shi-Cong Hu, Chuan-Dong Gao, Jian-Li Zhang, Xin Zhang

Abstract: Background estimation is essential when studying TeV gamma-ray astronomy for extensive air shower arrays. In this work, by applying four applying four different methods including equi-zenith angle method, surrounding window method, direct integration method, and time-swap** method, the number of the background events is calculated. Based on simulation samples, the statistical significance of the… ▽ More Background estimation is essential when studying TeV gamma-ray astronomy for extensive air shower arrays. In this work, by applying four applying four different methods including equi-zenith angle method, surrounding window method, direct integration method, and time-swap** method, the number of the background events is calculated. Based on simulation samples, the statistical significance of the excess signal from different background estimation methods is determined. Following this, we discuss the limits and the applicability of the four methods under different conditions. Under the detector stability assumption with signal, the results from the above four methods are consistent at the 1 sigma level. In the no signal condition, when the acceptance of the detector changes with both space and time, the surrounding window method is most stable and hardly affected. In this acceptance assumption, we find that the background estimation in the direct integration and time-swap** methods are sensitive to the selection of time window, and the shorter time window can reduce the impact on the background estimation to some extent. △ Less

Submitted 12 November, 2022; v1 submitted 30 September, 2022; originally announced October 2022.

Comments: 19 pages

Overcoming contrast reversals in focused probe ptychography of thick materials: an optimal pipeline for efficiently determining local atomic structure in materials science

Authors: C. Gao, C. Hofer, D. Jannis, A. Béché, J. Verbeeck, T. J. Pennycook

Abstract: Ptychography provides highly efficient imaging in scanning transmission electron microscopy (STEM), but questions have remained over its applicability to strongly scattering samples such as those most commonly seen in materialsscience. Although contrast reversals can appear in ptychographic phase images as the projected potentials of the sample increase, we show here how these can be easily overco… ▽ More Ptychography provides highly efficient imaging in scanning transmission electron microscopy (STEM), but questions have remained over its applicability to strongly scattering samples such as those most commonly seen in materialsscience. Although contrast reversals can appear in ptychographic phase images as the projected potentials of the sample increase, we show here how these can be easily overcome by a small amount of defocus. The amount of defocus is small enough that it can exist naturally when focusing using the annular dark field (ADF) signal, but can also be adjusted post acquisition. The ptychographic images of strongly scattering materials are clearer at finite doses than other STEM techniques, and can better reveal light atomic columns within heavy lattices. In addition data for ptychography can now be collected simultaneously with the fastest of ADF scans. This combination of sensitivity and interpretability presents an ideal workflow for materials science. △ Less

Submitted 4 August, 2022; v1 submitted 26 May, 2022; originally announced May 2022.

Thin liquid film as an optical nonlinear-nonlocal medium and memory element in integrated optofluidic reservoir computer

Authors: Chengkuan Gao, Prabhav Gaur, Shimon Rubin, Yeshaiahu Fainman

Abstract: Understanding light-matter interaction enables harnessing physical effects to translate into new capabilities realized in modern integrated photonics platforms. Here, we present the design and characterization of optofluidic components in integrated photonics platform, and numerically predict a series of novel physical effects which rely on thermocapillary-driven interaction between waveguide mode… ▽ More Understanding light-matter interaction enables harnessing physical effects to translate into new capabilities realized in modern integrated photonics platforms. Here, we present the design and characterization of optofluidic components in integrated photonics platform, and numerically predict a series of novel physical effects which rely on thermocapillary-driven interaction between waveguide modes to topography changes of optically thin liquid dielectric film. Our results indicate that this coupling introduces substantial self-induced phase change in a single channel waveguide, transmittance through Bragg grating waveguide and nonlocal interaction between adjacent waveguides. We then employ the self-induced phase change together with the inherent built-in finite relaxation time of the liquid film, to demonstrate that its light-driven deformation can serve as a reservoir computer capable to perform digital and analog tasks, where the gas-liquid interface operates both as a nonlinear actuator and as an optical memory element. △ Less

Submitted 27 July, 2022; v1 submitted 6 October, 2021; originally announced October 2021.

Comments: Main text: 6 figures, 26 pages. Supplementary Material: 11 figures, 20 pages

Pulsating dissipative solitons in a Mamyshev oscillator

Authors: Bo Cao, Kangjun Zhao, Chenxin Gao, Xiaosheng Xiao, Chengying Bao, Changxi Yang

Abstract: Mode-locked fiber lasers provide a versatile playground to study dissipative soliton (DS) dynamics. The corresponding studies not only give insights into soliton dynamics in dissipative systems, but also contribute to femtosecond fiber laser design. Recently, Mamyshev oscillators (MOs), which rely upon a pair of narrow filters with offset passing frequencies, have emerged as a promising candidate… ▽ More Mode-locked fiber lasers provide a versatile playground to study dissipative soliton (DS) dynamics. The corresponding studies not only give insights into soliton dynamics in dissipative systems, but also contribute to femtosecond fiber laser design. Recently, Mamyshev oscillators (MOs), which rely upon a pair of narrow filters with offset passing frequencies, have emerged as a promising candidate for high power, ultrabroad bandwidth pulse generation. To date, only stable mode-locking states in MOs have been reported. Here, we present a comprehensive experimental and numerical investigation of pulsating DSs in an ytterbium MO. By reducing the filter separation down to 4 nm, we observe pulsation in a single pulse state as well as a soliton molecule state. In the single pulse state, the output pulse energy can vary as large as 40 times in our MO. Single-shot spectra measured by the dispersive Fourier transform (DFT) method reveal the spectral bandwidth breathing during pulsation and enables the observation of soliton explosion in a pulsation state. In addition, pulsation with a period lasting 9 round trips and even a chaotic pulsation state are also observed. Numerical simulations based on a lumped model qualitatively agree with our observation. Our results enrich DS dynamics in MOs and show the impact of filter separation on the stability of MOs. △ Less

Submitted 2 September, 2021; originally announced September 2021.

The Impact of Machine Learning on 2D/3D Registration for Image-guided Interventions: A Systematic Review and Perspective

Authors: Mathias Unberath, Cong Gao, Yicheng Hu, Max Judish, Russell H Taylor, Mehran Armand, Robert Grupp

Abstract: Image-based navigation is widely considered the next frontier of minimally invasive surgery. It is believed that image-based navigation will increase the access to reproducible, safe, and high-precision surgery as it may then be performed at acceptable costs and effort. This is because image-based techniques avoid the need of specialized equipment and seamlessly integrate with contemporary workflo… ▽ More Image-based navigation is widely considered the next frontier of minimally invasive surgery. It is believed that image-based navigation will increase the access to reproducible, safe, and high-precision surgery as it may then be performed at acceptable costs and effort. This is because image-based techniques avoid the need of specialized equipment and seamlessly integrate with contemporary workflows. Further, it is expected that image-based navigation will play a major role in enabling mixed reality environments and autonomous, robotic workflows. A critical component of image guidance is 2D/3D registration, a technique to estimate the spatial relationships between 3D structures, e.g., volumetric imagery or tool models, and 2D images thereof, such as fluoroscopy or endoscopy. While image-based 2D/3D registration is a mature technique, its transition from the bench to the bedside has been restrained by well-known challenges, including brittleness of the optimization objective, hyperparameter selection, and initialization, difficulties around inconsistencies or multiple objects, and limited single-view performance. One reason these challenges persist today is that analytical solutions are likely inadequate considering the complexity, variability, and high-dimensionality of generic 2D/3D registration problems. The recent advent of machine learning-based approaches to imaging problems that, rather than specifying the desired functional map**, approximate it using highly expressive parametric models holds promise for solving some of the notorious challenges in 2D/3D registration. In this manuscript, we review the impact of machine learning on 2D/3D registration to systematically summarize the recent advances made by introduction of this novel technology. Grounded in these insights, we then offer our perspective on the most pressing needs, significant open problems, and possible next steps. △ Less

Submitted 4 August, 2021; originally announced August 2021.

Optical Excitation and Trap** of $^{81}$Kr

Authors: Jie. S. Wang, F. Ritterbusch, X. -Z. Dong, C. Gao, H. Li, W. Jiang, S. -Y. Liu, Z. -T. Lu, W. -H. Wang, G. -M. Yang, Y. -S. Zhang, Z. -Y. Zhang

Abstract: We have realized optical excitation, trap** and detection of the radioisotope $^{81}$Kr with an isotopic abundance of 0.9 ppt. The 124 nm light needed for the production of metastable atoms is generated by a resonant discharge lamp. Photon transport through the optically thick krypton gas inside the lamp is simulated and optimized to enhance both brightness and resonance. We achieve a state-of-t… ▽ More We have realized optical excitation, trap** and detection of the radioisotope $^{81}$Kr with an isotopic abundance of 0.9 ppt. The 124 nm light needed for the production of metastable atoms is generated by a resonant discharge lamp. Photon transport through the optically thick krypton gas inside the lamp is simulated and optimized to enhance both brightness and resonance. We achieve a state-of-the-art $^{81}$Kr loading rate of 1800 atoms/h, which can be further scaled up by adding more lamps. The all-optical approach overcomes the limitations on precision and sample size of radiokrypton dating, enabling new applications in the earth sciences, particularly for dating of polar ice cores. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Journal ref: Phys. Rev. Lett. 127, 023201 (2021)

Event driven 4D STEM acquisition with a Timepix3 detector: microsecond dwell time and faster scans for high precision and low dose applications

Authors: Daen Jannis, Christoph Hofer, Chuang Gao, Xiaobin Xie, Armand Béché, Timothy J. Pennycook, Jo Verbeeck

Abstract: Four dimensional scanning transmission electron microscopy (4D STEM) records the scattering of electrons in a material in great detail. The benefits offered by 4D STEM are substantial, with the wealth of data it provides facilitating for instance high precision, high electron dose efficiency phase imaging via center of mass or ptychography based analysis. However the requirement for a 2D image of… ▽ More Four dimensional scanning transmission electron microscopy (4D STEM) records the scattering of electrons in a material in great detail. The benefits offered by 4D STEM are substantial, with the wealth of data it provides facilitating for instance high precision, high electron dose efficiency phase imaging via center of mass or ptychography based analysis. However the requirement for a 2D image of the scattering to be recorded at each probe position has long placed a severe bottleneck on the speed at which 4D STEM can be performed. Recent advances in camera technology have greatly reduced this bottleneck, with the detection efficiency of direct electron detectors being especially well suited to the technique. However even the fastest frame driven pixelated detectors still significantly limit the scan speed which can be used in 4D STEM, making the resulting data susceptible to drift and hampering its use for low dose beam sensitive applications. Here we report the development of the use of an event driven Timepix3 direct electron camera that allows us to overcome this bottleneck and achieve 4D STEM dwell times down to 100~ns; orders of magnitude faster than what has been possible with frame based readout. We characterise the detector for different acceleration voltages and show that the method is especially well suited for low dose imaging and promises rich datasets without compromising dwell time when compared to conventional STEM imaging. △ Less

Submitted 8 December, 2021; v1 submitted 6 July, 2021; originally announced July 2021.

First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors

Authors: ALICE ITS project, :, G. Aglieri Rinella, M. Agnello, B. Alessandro, F. Agnese, R. S. Akram, J. Alme, E. Anderssen, D. Andreou, F. Antinori, N. Apadula, P. Atkinson, R. Baccomi, A. Badalà, A. Balbino, C. Bartels, R. Barthel, F. Baruffaldi, I. Belikov, S. Beole, P. Becht, A. Bhatti, M. Bhopal, N. Bianchi , et al. (230 additional authors not shown)

Abstract: A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra… ▽ More A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance. In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties. △ Less

Submitted 17 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

A large deviation theory perspective on nanoscale transport phenomena

Authors: David T. Limmer, Chloe Y. Gao, Anthony R. Poggioli

Abstract: Understanding transport processes in complex nanoscale systems, like ionic conductivities in nanofluidic devices or heat conduction in low dimensional solids, poses the problem of examining fluctuations of currents within nonequilibrium steady states and relating those fluctuations to nonlinear or anomalous responses. We have developed a systematic framework for computing distributions of time int… ▽ More Understanding transport processes in complex nanoscale systems, like ionic conductivities in nanofluidic devices or heat conduction in low dimensional solids, poses the problem of examining fluctuations of currents within nonequilibrium steady states and relating those fluctuations to nonlinear or anomalous responses. We have developed a systematic framework for computing distributions of time integrated currents in molecular models and relating cumulants of those distributions to nonlinear transport coefficients. The approach elaborated upon in this perspective follows from the theory of dynamical large deviations, benefits from substantial previous formal development, and has been illustrated in several applications. The framework provides a microscopic basis for going beyond traditional hydrodynamics in instances where local equilibrium assumptions break down, which are ubiquitous at the nanoscale. △ Less

Submitted 13 July, 2021; v1 submitted 12 April, 2021; originally announced April 2021.

Comments: Small revisions for clarity

On the molecular correlations that result in field-dependent conductivities in electrolyte solutions

Authors: Dominika Lesnicki, Chloe Y. Gao, David T. Limmer, Benjamin Rotenberg

Abstract: Employing recent advances in response theory and nonequilibrium ensemble reweighting, we study the dynamic and static correlations that give rise to an electric field-dependent ionic conductivity in electrolyte solutions. We consider solutions modeled with both implicit and explicit solvents, with different dielectric properties, and at multiple concentrations. Implicit solvent models at low conce… ▽ More Employing recent advances in response theory and nonequilibrium ensemble reweighting, we study the dynamic and static correlations that give rise to an electric field-dependent ionic conductivity in electrolyte solutions. We consider solutions modeled with both implicit and explicit solvents, with different dielectric properties, and at multiple concentrations. Implicit solvent models at low concentrations and small dielectric constants exhibit strongly field-dependent conductivities. We compared these results to the Onsager-Wilson theory of the Wien effect, which provides a qualitatively consistent prediction at low concentrations and high static dielectric constants, but is inconsistent away from these regimes. The origin of the discrepancy is found to be increased ion correlations under these conditions. Explicit solvent effects act to suppress nonlinear responses, yielding a weakly field-dependent conductivity over the range of physically realizable field strengths. By decomposing the relevant time correlation functions, we find that the insensitivity of the conductivity to the field results from the persistent frictional forces on the ions from the solvent. Our findings illustrate the utility of nonequilibrium response theory in rationalizing nonlinear transport behavior. △ Less

Submitted 9 June, 2021; v1 submitted 25 March, 2021; originally announced March 2021.

Comments: Small revisions for clarity

Principles of Low Dissipation Computing from a Stochastic Circuit Model

Authors: Chloe Ya Gao, David T. Limmer

Abstract: We introduce a thermodynamically consistent, minimal stochastic model for complementary logic gates built with field-effect transistors. We characterize the performance of such gates with tools from information theory and study the interplay between accuracy, speed, and dissipation of computations. With a few universal building blocks, such as the NOT and NAND gates, we are able to model arbitrary… ▽ More We introduce a thermodynamically consistent, minimal stochastic model for complementary logic gates built with field-effect transistors. We characterize the performance of such gates with tools from information theory and study the interplay between accuracy, speed, and dissipation of computations. With a few universal building blocks, such as the NOT and NAND gates, we are able to model arbitrary combinatorial and sequential logic circuits, which are modularized to implement computing tasks. We find generically that high accuracy can be achieved provided sufficient energy consumption and time to perform the computation. However, for low-energy computing, accuracy and speed are coupled in a way that depends on the device architecture and task. Our work bridges the gap between the engineering of low dissipation digital devices and theoretical developments in stochastic thermodynamics, and provides a platform to study design principles for low dissipation digital devices. △ Less

Submitted 1 August, 2021; v1 submitted 25 February, 2021; originally announced February 2021.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. Research 3, 033169 (2021)

Construction and On-site Performance of the LHAASO WFCTA Camera

Authors: F. Aharonian, Q. An, Axikegu, L. X. Bai, Y. X. Bai, Y. W. Bao, D. Bastieri, X. J. Bi, Y. J. Bi, H. Cai, J. T. Cai, Z. Cao, Z. Cao, J. Chang, J. F. Chang, X. C. Chang, B. M. Chen, J. Chen, L. Chen, L. Chen, L. Chen, M. J. Chen, M. L. Chen, Q. H. Chen, S. H. Chen , et al. (234 additional authors not shown)

Abstract: The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this… ▽ More The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here. △ Less

Submitted 4 July, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

Comments: 45 pages, 21 figures, article

Journal ref: Eur. Phys. J. C 81, 657 (2021)

Enhancement of the $^{81}\mathrm{Kr}$ and $^{85}\mathrm{Kr}$ count rates by optical pum**

Authors: Z. -Y. Zhang, F. Ritterbusch, W. -K. Hu, X. -Z. Dong, C. Y. Gao, W. Jiang, S. -Y. Liu, Z. -T. Lu, J. S. Wang, G. -M. Yang

Abstract: We report an increase of up to 60% on the count rates of the rare $^{81}\mathrm{Kr}$ and $^{85}\mathrm{Kr}$ isotopes in the Atom Trap Trace Analysis method by enhancing the production of metastable atoms in the discharge source. Additional atoms in the metastable $ 1s_5 $ level (Paschen notation) are obtained via optically pum** the $1s_4-2p_6$ transition at 819 nm. By solving the master equatio… ▽ More We report an increase of up to 60% on the count rates of the rare $^{81}\mathrm{Kr}$ and $^{85}\mathrm{Kr}$ isotopes in the Atom Trap Trace Analysis method by enhancing the production of metastable atoms in the discharge source. Additional atoms in the metastable $ 1s_5 $ level (Paschen notation) are obtained via optically pum** the $1s_4-2p_6$ transition at 819 nm. By solving the master equation for the system, we identify this transition to be the most suitable one and can describe the measured increase in metastable population as a function of the 819-nm laser power. We calculate the previously unknown isotope shifts and hyperfine splittings of the $1s_4-2p_6$ transition in $^{81}\mathrm{Kr}$ and $^{85}\mathrm{Kr}$, and verify the results with count rate measurements. The demonstrated count-rate increase enables a corresponding decrease in the required sample sizes for $^{81}\mathrm{Kr}$ and $^{85}\mathrm{Kr}$ dating, a significant improvement for applications such as dating of ocean water and deep ice cores. △ Less

Submitted 22 May, 2020; originally announced May 2020.

Journal ref: Physical Review A 101, 053429 (2020)

i-flow: High-dimensional Integration and Sampling with Normalizing Flows

Authors: Christina Gao, Joshua Isaacson, Claudius Krause

Abstract: In many fields of science, high-dimensional integration is required. Numerical methods have been developed to evaluate these complex integrals. We introduce the code i-flow, a python package that performs high-dimensional numerical integration utilizing normalizing flows. Normalizing flows are machine-learned, bijective map**s between two distributions. i-flow can also be used to sample random p… ▽ More In many fields of science, high-dimensional integration is required. Numerical methods have been developed to evaluate these complex integrals. We introduce the code i-flow, a python package that performs high-dimensional numerical integration utilizing normalizing flows. Normalizing flows are machine-learned, bijective map**s between two distributions. i-flow can also be used to sample random points according to complicated distributions in high dimensions. We compare i-flow to other algorithms for high-dimensional numerical integration and show that i-flow outperforms them for high dimensional correlated integrals. The i-flow code is publicly available on gitlab at https://gitlab.com/i-flow/i-flow. △ Less

Submitted 17 August, 2020; v1 submitted 15 January, 2020; originally announced January 2020.

Comments: 21 pages, 5 figures, 4 tables; v2: improved presentation and discussion, matches published version. Mach. Learn.: Sci. Technol (2020)

Report number: FERMILAB-PUB-20-010-T

Transonic aeroelasticity: a new perspective from the fluid mode

Authors: Chuanqiang Gao, Weiwei Zhang

Abstract: Within the transonic regime, the aeroelastic problems exhibit many unique characteristics compared with subsonic and supersonic cases. Although a lot of research has been carried out in this field, the underlying mechanisms of these complex phenomena are not clearly understood yet, resulting in a challenge in the design and use of modern aircraft. This review summarizes the recent investigations o… ▽ More Within the transonic regime, the aeroelastic problems exhibit many unique characteristics compared with subsonic and supersonic cases. Although a lot of research has been carried out in this field, the underlying mechanisms of these complex phenomena are not clearly understood yet, resulting in a challenge in the design and use of modern aircraft. This review summarizes the recent investigations on nonclassical transonic aeroelastic problems, including transonic buzz, reduction of transonic buffet onset, transonic buffeting response and frequency lock-in phenomenon in transonic buffet flow. After introducing the research methods in unsteady aerodynamics and aeroelastic problems, the dynamical characteristics as well as the physical mechanisms of these phenomena are discussed from the perspective of the fluid mode. In the framework of the ROM (reduced order model) -based model, the dominant fluid mode (or the eigenvalue) and its coupling process with the structural model can be clearly captured. The flow nonlinearity was believed to be the cause of the complexity of transonic aeroelasticity. In fact, this review indicates that the complexity lies in the decrease of the flow stability in the transonic regime. In this condition, the fluid mode becomes a principal part of the coupling process, which results in the instability of the fluid mode itself or the structural mode, and thus, it is the root cause of different transonic aeroelastic phenomena. △ Less

Submitted 13 January, 2020; originally announced January 2020.

Warm dense matter simulation via electron temperature dependent deep potential molecular dynamics

Authors: Yuzhi Zhang, Chang Gao, Linfeng Zhang, Han Wang, Mohan Chen

Abstract: Simulating warm dense matter that undergoes a wide range of temperatures and densities is challenging. Predictive theoretical models, such as quantum-mechanics-based first-principles molecular dynamics (FPMD), require a huge amount of computational resources. Herein, we propose a deep learning based scheme, called electron temperature dependent deep potential molecular dynamics (TDDPMD), for effic… ▽ More Simulating warm dense matter that undergoes a wide range of temperatures and densities is challenging. Predictive theoretical models, such as quantum-mechanics-based first-principles molecular dynamics (FPMD), require a huge amount of computational resources. Herein, we propose a deep learning based scheme, called electron temperature dependent deep potential molecular dynamics (TDDPMD), for efficiently simulating warm dense matter with the accuracy of FPMD. The TDDPMD simulation is several orders of magnitudes faster than FPMD, and, unlike FPMD, its efficiency is not affected by the electron temperature. We apply the TDDPMD scheme to beryllium (Be) in a wide range of temperatures (0.4 to 2500 eV) and densities (3.50 to 8.25 g/cm$^3$). Our results demonstrate that the TDDPMD method not only accurately reproduces the structural properties of Be along the principal Hugoniot curve at the FPMD level, but also yields even more reliable diffusion coefficients than typical FPMD simulations due to its ability to simulate larger systems with longer time. △ Less

Submitted 31 August, 2019; originally announced September 2019.

Comments: 4 figures

Self-energy effects and energy band theory for warm dense matter

Authors: Chang Gao, Shen Zhang, X. T. He, Wei Kang, ** Zhang, Mohan Chen, Cong Wang

Abstract: The energy band structures caused by self-energy shifting that results in bound energy levels broadening and merging in warm dense aluminum and beryllium are observed. An energy band theory for warm dense matter (WDM) is proposed and a new code based on the energy band theory is developed to improve the traditional density functional method. Massive data of the equation of state and transport coef… ▽ More The energy band structures caused by self-energy shifting that results in bound energy levels broadening and merging in warm dense aluminum and beryllium are observed. An energy band theory for warm dense matter (WDM) is proposed and a new code based on the energy band theory is developed to improve the traditional density functional method. Massive data of the equation of state and transport coefficients for WDM in medium and low Z have been simulated. The transition from fully degenerate to partially degenerate (related to WDM) and finally to non-degenerate state is investigated using the Lorenz number varying with the degeneracy parameter, and the lower and upper parameter boundaries for WDM are achieved. It is shown that the pressure ionization results in the Wiedemann-Franz law no longer available for WDM. △ Less

Submitted 20 December, 2018; originally announced December 2018.

Nonlinear transport coefficients from large deviation functions

Authors: Chloe Ya Gao, David T. Limmer

Abstract: Nonlinear response occurs naturally when a strong perturbation takes a system far from equilibrium. Despite of its omnipresence in nanoscale systems, it is difficult to predict in a general and efficient way. Here we introduce a way to compute arbitrarily high order transport coefficients of stochastic systems, using the framework of large deviation theory. Leveraging time reversibility in the mic… ▽ More Nonlinear response occurs naturally when a strong perturbation takes a system far from equilibrium. Despite of its omnipresence in nanoscale systems, it is difficult to predict in a general and efficient way. Here we introduce a way to compute arbitrarily high order transport coefficients of stochastic systems, using the framework of large deviation theory. Leveraging time reversibility in the microscopic dynamics, we relate nonlinear response to equilibrium multi-time correlation functions among both time reversal symmetric and asymmetric observables, which can be evaluated from derivatives of large deviation functions. This connection establishes a thermodynamic-like relation for nonequilibrium response and provides a practical route to its evaluation, as large deviation functions are amenable to importance sampling. We demonstrate the generality and efficiency of this method in predicting transport coefficients in single particle systems and an interacting system exhibiting thermal rectification. △ Less

Submitted 6 May, 2019; v1 submitted 4 December, 2018; originally announced December 2018.

Comments: 10 pages, 4 figures

Multi-resolution Progressive Computational Ghost Imaging

Authors: Cheng Zhou, Tian Tian, Chao Gao, Wenli Gong, Lijun Song

Abstract: Ghost imaging needs massive measurements to obtain an image with good visibility and the imaging speed is usually very low. In order to realize real-time high-resolution ghost imaging of a target which is located in a scenario with a large field of view (FOV), we propose a high-speed multi-resolution progressive computational ghost imaging approach. The target area is firstly locked by a low-resol… ▽ More Ghost imaging needs massive measurements to obtain an image with good visibility and the imaging speed is usually very low. In order to realize real-time high-resolution ghost imaging of a target which is located in a scenario with a large field of view (FOV), we propose a high-speed multi-resolution progressive computational ghost imaging approach. The target area is firstly locked by a low-resolution image with a small number of measurements, then high-resolution imaging of the target can be obtained by only modulating the light fields corresponding to the target area. The experiments verify the feasibility of the approach. The influence of detection signal-to-noise ratio on the quality of multi-resolution progressive computational ghost imaging is also investigated experimentally. This approach may be applied to some practical application scenarios such as ground-to-air or air-to-air imaging with a large FOV. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Urban contact structures for epidemic simulations: Correcting biases in data-driven approaches

Authors: Zhanwei Du, Chao Gao, Yuan Bai, Yongjian Yang, Petter Holme

Abstract: Epidemics are emergent phenomena depending on the epidemiological characteristics of pathogens and the interaction and movement of people. Public transit systems have provided much important information about the movement of people, but there are also other means of transportation (e.g., bicycle and private car), that are invisible to public transit data. This discrepancy can induce a bias in dise… ▽ More Epidemics are emergent phenomena depending on the epidemiological characteristics of pathogens and the interaction and movement of people. Public transit systems have provided much important information about the movement of people, but there are also other means of transportation (e.g., bicycle and private car), that are invisible to public transit data. This discrepancy can induce a bias in disease models that leads to mispredictions of epidemic growth (e.g., peak prevalence and time). In our study, we aim to advance and compare the epidemic spreading dynamics using public transit trips, in contrast to more accurate estimates of population movement using mobile phones traces. In our study, we simulate epidemic outbreaks in a cohort of two million mobile phone users. We use a metapopulation model incorporating susceptible-infected-recovered dynamics to analyze and compare different effective contract matrices, constructed by the public transit systems and mobile phones respectively, on the process of epidemics. We find that epidemic outbreaks using public transit trips tend to be underestimated in terms of the epidemic spreading dynamics, reaching epidemic peaks weaker and later. This is rooted in a later introduction of new infectious people into uninfected locations. △ Less

Submitted 21 September, 2018; v1 submitted 27 April, 2018; originally announced April 2018.

Ghost imaging for an occluded object

Authors: Chao Gao, Xiaoqian Wang, Lidan Gou, Yuling Feng, Hongji Cai, Zhifeng Wang, Zhihai Yao

Abstract: Imaging for an occluded object is usually a difficult problem, in this letter, we introduce an imaging scheme based on computational ghost imaging, which can obtain the image of a target object behind an obstacle. According to our theoretical analysis, once the distance between the object and the obstacle is far enough, one can obtain the image of the object by using ghost imaging technique. The w… ▽ More Imaging for an occluded object is usually a difficult problem, in this letter, we introduce an imaging scheme based on computational ghost imaging, which can obtain the image of a target object behind an obstacle. According to our theoretical analysis, once the distance between the object and the obstacle is far enough, one can obtain the image of the object by using ghost imaging technique. The wavelength of the light source also affects the quality of the reconstructed image. In addition, if the bucket detector is placed far away from the obstacle, a tiny point-like detector without collecting lens can be applied to realize the imaging. These theoretical results above have been verified with our numerical simulations. Furthermore, the robustness of this imaging scheme is also investigated. △ Less

Submitted 2 September, 2018; v1 submitted 10 April, 2018; originally announced April 2018.

Comments: 12 pages, 6 figures

Correlation-Compressed Direct Coupling Analysis

Authors: Chen-Yi Gao, Hai-Jun Zhou, Erik Aurell

Abstract: Learning Ising or Potts models from data has become an important topic in statistical physics and computational biology, with applications to predictions of structural contacts in proteins and other areas of biological data analysis. The corresponding inference problems are challenging since the normalization constant (partition function) of the Ising/Potts distributions cannot be computed efficie… ▽ More Learning Ising or Potts models from data has become an important topic in statistical physics and computational biology, with applications to predictions of structural contacts in proteins and other areas of biological data analysis. The corresponding inference problems are challenging since the normalization constant (partition function) of the Ising/Potts distributions cannot be computed efficiently on large instances. Different ways to address this issue have hence given size to a substantial methodological literature. In this paper we investigate how these methods could be used on much larger datasets than studied previously. We focus on a central aspect, that in practice these inference problems are almost always severely under-sampled, and the operational result is almost always a small set of leading (largest) predictions. We therefore explore an approach where the data is pre-filtered based on empirical correlations, which can be computed directly even for very large problems. Inference is only used on the much smaller instance in a subsequent step of the analysis. We show that in several relevant model classes such a combined approach gives results of almost the same quality as the computationally much more demanding inference on the whole dataset. We also show that results on whole-genome epistatic couplings that were obtained in a recent computation-intensive study can be retrieved by the new approach. The method of this paper hence opens up the possibility to learn parameters describing pair-wise dependencies in whole genomes in a computationally feasible and expedient manner. △ Less

Submitted 13 October, 2017; originally announced October 2017.

Comments: 15 pages, including 11 figures

Journal ref: Phys. Rev. E 98, 032407 (2018)

Transport Coefficients from Large Deviation Functions

Authors: Chloe Ya Gao, David T. Limmer

Abstract: We describe a method for computing transport coefficients from the direct evaluation of large deviation function. This method is general, relying on only equilibrium fluctuations, and is statistically efficient, employing trajectory based importance sampling. Equilibrium fluctuations of molecular currents are characterized by their large deviation functions, which is a scaled cumulant generating f… ▽ More We describe a method for computing transport coefficients from the direct evaluation of large deviation function. This method is general, relying on only equilibrium fluctuations, and is statistically efficient, employing trajectory based importance sampling. Equilibrium fluctuations of molecular currents are characterized by their large deviation functions, which is a scaled cumulant generating function analogous to the free energy. A diffusion Monte Carlo algorithm is used to evaluate the large deviation functions, from which arbitrary transport coefficients are derivable. We find significant statistical improvement over traditional Green-Kubo based calculations. The systematic and statistical errors of this method are analyzed in the context of specific transport coefficient calculations, including the shear viscosity, interfacial friction coefficient, and thermal conductivity. △ Less

Submitted 19 October, 2017; v1 submitted 26 September, 2017; originally announced September 2017.

Comments: 11 pages, 5 figures

A Co(II)-based Molecular Magnet with a 6 T Coercive Field

Authors: Xiaoqing Liu, Xiaowen Feng, Yuan Zhang, Xue**g Zhang, Chen Gao, Jun-Liang Liu, Bing-Wu Wang, Kasper S. Pedersen, Lukas Keller, Yi-Quan Zhang, Wei Shi, Song Gao, Peng Cheng, Jeffrey R. Long

Abstract: Hard magnets with high coercivity, such as Nd2Fe14B and SmCo5 alloys, can maintain magnetisation under a high reverse external magnetic field and have therefore become irreplaceable parts in many practical applications. Molecular magnets are promising alternatives, owing to their precise and designable chemical structures, tuneable functionalities and controllable synthetic methods. Here, we demon… ▽ More Hard magnets with high coercivity, such as Nd2Fe14B and SmCo5 alloys, can maintain magnetisation under a high reverse external magnetic field and have therefore become irreplaceable parts in many practical applications. Molecular magnets are promising alternatives, owing to their precise and designable chemical structures, tuneable functionalities and controllable synthetic methods. Here, we demonstrate that an unusually large coercive field can be achieved in a single-chain magnet. Systematic characterisations, including magnetic susceptibility, heat capacity and neutron diffraction measurements, show that the observed giant coercive field originates from the spin dynamics along the one-dimensional chain of the compound because of the strong exchange coupling between Co(II) centres and radicals. △ Less

Submitted 29 September, 2017; v1 submitted 22 September, 2017; originally announced September 2017.

Comments: We find some problems in the manuscript, so we have to withdraw it. We may submit a new version later

Forward-backward asymmetry of photoemission in C$_{60}$ excited by few-cycle laser pulses

Authors: C. -Z. Gao, P. M. Dinh, P. -G. Reinhard, E. Suraud, C. Meier

Abstract: We theoretically analyze angle-resolved photo-electron spectra (ARPES) generated by the interaction of C$_{60}$ with intense, short laser pulses. In particular, we focus on the impact of the carrier-envelope phase (CEP) onto the angular distribution. The electronic dynamics is described by time-dependent density functional theory, and the ionic background of $\csixty$ is approximated by a particul… ▽ More We theoretically analyze angle-resolved photo-electron spectra (ARPES) generated by the interaction of C$_{60}$ with intense, short laser pulses. In particular, we focus on the impact of the carrier-envelope phase (CEP) onto the angular distribution. The electronic dynamics is described by time-dependent density functional theory, and the ionic background of $\csixty$ is approximated by a particularly designed jellium model. Our results show a clear dependence of the angular distributions onto the CEP for very short pulses covering only very few laser cycles, which disappears for longer pulses. For the specific laser parameters used in a recent experiments, a very good agreement is obtained. Furthermore, the asymmetry is found to depend on the energy of the emitted photoelectrons. The strong influence of the angular asymmetry of electron emission onto the CEP and pulse duration suggests to use this sensitivity as a means to analyze the structure of few-cycle laser pulses. △ Less

Submitted 20 January, 2017; originally announced January 2017.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. A 95, 033427 (2017)

A beam monitor using silicon pixel sensors for hadron therapy

Authors: Zhen Wang, Shuguang Zou, Yan Fan, Jun Liu, Xiangming Sun, Dong Wang, Huili Kang, Daming Sun, ** Yang, Hua Pei, Guangming Huang, Nu Xu, Chaosong Gao, Le Xiao

Abstract: We report the design and test results of a beam monitor developed for online monitoring in hadron therapy. The beam monitor uses eight silicon pixel sensors, \textit{Topmetal-${II}^-$}, as the anode array. \textit{Topmetal-${II}^-$} is a charge sensor designed in a CMOS 0.35 $μ$m technology. Each \textit{Topmetal-${II}^-$} sensor has $72\times72$ pixels and the pixel size is $83\times83$ $μ$m$^2$.… ▽ More We report the design and test results of a beam monitor developed for online monitoring in hadron therapy. The beam monitor uses eight silicon pixel sensors, \textit{Topmetal-${II}^-$}, as the anode array. \textit{Topmetal-${II}^-$} is a charge sensor designed in a CMOS 0.35 $μ$m technology. Each \textit{Topmetal-${II}^-$} sensor has $72\times72$ pixels and the pixel size is $83\times83$ $μ$m$^2$. In our design, the beam passes through the beam monitor without hitting the electrodes, making the beam monitor especially suitable for monitoring heavy ion beams. This design also reduces radiation damage to the beam monitor itself. The beam monitor is tested with a carbon ion beam at the Heavy Ion Research Facility in Lanzhou (HIRFL). Results indicate that the beam monitor can measure position, incidence angle and intensity of the beam with a position resolution better than 20 $μ$m, angular resolution about 0.5$^\circ$ and intensity statistical accuracy better than 2$\%$. △ Less

Submitted 19 January, 2017; v1 submitted 22 November, 2016; originally announced November 2016.

Journal ref: Nuclear Inst. and Methods in Physics Research, A 849C (2017) pp. 20-24

Detailed study of the column-based priority logic readout of Topmetal-II- CMOS pixel direct charge sensor

Authors: Mangmang An, Chufeng Chen, Chaosong Gao, Mikyung Han, Guangming Huang, Rong Ji, Xiaoting Li, Yuan Mei, Hua Pei, Quan Sun, Xiangming Sun, Kai Wang, Le Xiao, ** Yang, Wei Zhang, Wei Zhou

Abstract: We present the detailed study of the digital readout of Topmetal-II- CMOS pixel direct charge sensor. Topmetal-II- is an integrated sensor with an array of 72X72 pixels each capable of directly collecting external charge through exposed metal electrodes in the topmost metal layer. In addition to the time-shared multiplexing readout of the analog output from Charge Sensitive Amplifiers in each pixe… ▽ More We present the detailed study of the digital readout of Topmetal-II- CMOS pixel direct charge sensor. Topmetal-II- is an integrated sensor with an array of 72X72 pixels each capable of directly collecting external charge through exposed metal electrodes in the topmost metal layer. In addition to the time-shared multiplexing readout of the analog output from Charge Sensitive Amplifiers in each pixel, hits are also generated through comparators with individually DAC settable thresholds in each pixel. The hits are read out via a column-based priority logic structure, retaining both hit location and time information. The in-array column-based priority logic is fully combinational hence there is no clock distributed in the pixel array. Sequential logic and clock are placed on the peripheral of the array. We studied the detailed working behavior and performance of this readout, and demonstrated its potential in imaging applications. △ Less

Submitted 23 August, 2016; originally announced August 2016.

Experimental evidence of optical analogue of electromagnetically induced transparency in graphene

Authors: Lei Gao, Tao Zhu, Min Liu, Wei Huang, Yu Jia Li, Cong Gao

Abstract: We demonstrate the first experimental observation of coherent population oscillation, an optical analogue of electromagnetically induced transparency, in graphene based on phase sensitive pump-probe system. Degenerate four-wave-mixing between pump and probe modifies the dispersion and absorption of the population oscillation process in graphene, and leads to enhance and depression of modulation in… ▽ More We demonstrate the first experimental observation of coherent population oscillation, an optical analogue of electromagnetically induced transparency, in graphene based on phase sensitive pump-probe system. Degenerate four-wave-mixing between pump and probe modifies the dispersion and absorption of the population oscillation process in graphene, and leads to enhance and depression of modulation instability with asymmetry in frequency. The analytically predicted asymmetrical burning hole fully consists with the experiments. △ Less

Submitted 7 April, 2016; originally announced April 2016.

Accurate and fast fiber transfer delay measurement based on phase discrimination and frequency measurement

Authors: J. W. Dong, B. Wang, C. Gao, L. J. Wang

Abstract: An accurate and fast fiber transfer delay measurement method is demonstrated. As a key technique, a simple ambiguity resolving process based on phase discrimination and frequency measurement is used to overcome the contradiction between measurement accuracy and system complexity. The optimized system achieves a high accuracy of 0.3 ps with a 0.1 ps resolution, and a large dynamic range up to 50 km… ▽ More An accurate and fast fiber transfer delay measurement method is demonstrated. As a key technique, a simple ambiguity resolving process based on phase discrimination and frequency measurement is used to overcome the contradiction between measurement accuracy and system complexity. The optimized system achieves a high accuracy of 0.3 ps with a 0.1 ps resolution, and a large dynamic range up to 50 km as well as no dead zone. △ Less

Submitted 3 April, 2016; originally announced April 2016.

Strong-field effects in the photo-emission spectrum of the C$_{60}$ fullerene

Authors: Cong-Zhang Gao, Phuong Mai Dinh, Peter Kluepfel, Chris Meier, Paul-Gerhard Reinhard, Eric Suraud

Abstract: Considering C$_{60}$ as a model system for describing field emission from the extremity of a carbon nanotip, we explore electron emission from this fullerene excited by an intense, near-infrared, few-cycle laser pulse ($10^{13}$-$10^{14}~{\rm W/cm}^2$, 912 nm, 8-cycle). To this end, we use time-dependent density functional theory augmented by a self-interaction correction. The ionic background of… ▽ More Considering C$_{60}$ as a model system for describing field emission from the extremity of a carbon nanotip, we explore electron emission from this fullerene excited by an intense, near-infrared, few-cycle laser pulse ($10^{13}$-$10^{14}~{\rm W/cm}^2$, 912 nm, 8-cycle). To this end, we use time-dependent density functional theory augmented by a self-interaction correction. The ionic background of C$_{60}$ is described by a soft jellium model. Particular attention is paid to the high energy electrons. Comparing the spectra at different emission angles, we find that, as a major result of this study, the photoelectrons are strongly peaked along the laser polarization axis forming a highly collimated electron beam in the forward direction, especially for the high energy electrons. Moreover, the high-energy plateau cut-off found in the simulations agrees well with estimates from the classical three-step model. We also investigate the build-up of the high-energy part of a photoelectron spectrum by a time-resolved analysis. In particular, the modulation on the plateau can be interpreted as contributions from intracycle and intercycle interferences. △ Less

Submitted 14 January, 2016; originally announced January 2016.

Comments: 9 pages, 5 figures, accepted in Physical Review A

Highly accurate fiber transfer delay measurement with large dynamic range

Authors: J. W. Dong, B. Wang, C. Gao, Y. C. Guo, L. J. Wang

Abstract: A novel and efficient method for fiber transfer delay measurement is demonstrated. Fiber transfer delay measurement in time domain is converted into the frequency measurement of the modulation signal in frequency domain, accompany with a coarse and easy ambiguity resolving process. This method achieves a sub-picosecond resolution, with an accuracy of 1 picosecond, and a large dynamic range up to 5… ▽ More A novel and efficient method for fiber transfer delay measurement is demonstrated. Fiber transfer delay measurement in time domain is converted into the frequency measurement of the modulation signal in frequency domain, accompany with a coarse and easy ambiguity resolving process. This method achieves a sub-picosecond resolution, with an accuracy of 1 picosecond, and a large dynamic range up to 50 km as well as no measurement dead zone. △ Less

Submitted 6 December, 2015; originally announced December 2015.

A Low-Noise CMOS Pixel Direct Charge Sensor, Topmetal-II-

Authors: Mangmang An, Chufeng Chen, Chaosong Gao, Mikyung Han, Rong Ji, Xiaoting Li, Yuan Mei, Quan Sun, Xiangming Sun, Kai Wang, Le Xiao, ** Yang, Wei Zhou

Abstract: We report the design and characterization of a CMOS pixel direct charge sensor, Topmetal-II-, fabricated in a standard 0.35um CMOS Integrated Circuit process. The sensor utilizes exposed metal patches on top of each pixel to directly collect charge. Each pixel contains a low-noise charge-sensitive preamplifier to establish the analog signal and a discriminator with tunable threshold to generate hi… ▽ More We report the design and characterization of a CMOS pixel direct charge sensor, Topmetal-II-, fabricated in a standard 0.35um CMOS Integrated Circuit process. The sensor utilizes exposed metal patches on top of each pixel to directly collect charge. Each pixel contains a low-noise charge-sensitive preamplifier to establish the analog signal and a discriminator with tunable threshold to generate hits. The analog signal from each pixel is accessible through time-shared multiplexing over the entire array. Hits are read out digitally through a column-based priority logic structure. Tests show that the sensor achieved a <15e- analog noise and a 200e- minimum threshold for digital readout per pixel. The sensor is capable of detecting both electrons and ions drifting in gas. These characteristics enable its use as the charge readout device in future Time Projection Chambers without gaseous gain mechanism, which has unique advantages in low background and low rate-density experiments. △ Less

Submitted 21 December, 2015; v1 submitted 29 September, 2015; originally announced September 2015.

Journal ref: Nuclear Instruments and Methods in Physics Research A 810 (2016) 144-150

On the analysis of photo-electron spectra

Authors: C. -Z. Gao, P. M. Dinh, P. -G. Reinhard, E. Suraud

Abstract: We analyze Photo-Electron Spectra (PES) for a variety of excitation mechanisms from a simple mono-frequency laser pulse to involved combination of pulses as used, e.g., in attosecond experiments. In the case of simple pulses, the peaks in PES re- flect the occupied single-particle levels in combination with the given laser frequency. This usual, simple rule may badly fail in the case of excitation… ▽ More We analyze Photo-Electron Spectra (PES) for a variety of excitation mechanisms from a simple mono-frequency laser pulse to involved combination of pulses as used, e.g., in attosecond experiments. In the case of simple pulses, the peaks in PES re- flect the occupied single-particle levels in combination with the given laser frequency. This usual, simple rule may badly fail in the case of excitation pulses with mixed frequencies and if resonant modes of the system are significantly excited. We thus develop an extension of the usual rule to cover all possible excitation scenarios, including mixed frequencies in the attosecond regime. We find that the spectral dis- tributions of dipole, monopole and quadrupole power for the given excitation taken together and properly shifted by the single-particle energies provide a pertinent picture of the PES in all situations. This leads to the derivation of a generalized relation allowing to understand photo-electron yields even in complex experimental setups. △ Less

Submitted 19 May, 2015; originally announced May 2015.

Square Kilometer Array Telescope - Precision Reference Frequency Synchronisation via 1f-2f Dissemination

Authors: B. Wang, X. Zhu, C. Gao, Y. Bai, J. W. Dong, L. J. Wang

Abstract: The Square Kilometer Array (SKA) is an international effort to build the world's largest radio telescope, with one square kilometer collecting area. Besides its ambitious scientific objectives, such as probing the cosmic dawn and cradle of life, SKA also demands several revolutionary technological breakthroughs, with ultra-high precision synchronisation of the frequency references for thousands of… ▽ More The Square Kilometer Array (SKA) is an international effort to build the world's largest radio telescope, with one square kilometer collecting area. Besides its ambitious scientific objectives, such as probing the cosmic dawn and cradle of life, SKA also demands several revolutionary technological breakthroughs, with ultra-high precision synchronisation of the frequency references for thousands of antennas being one of them. In this report, aimed at applications to SKA, we demonstrate a frequency reference synchronization and dissemination scheme with the phase noise compensation function placed at the client site. Hence, one central hub can be linked to a large number of client sites, forming a star-shaped topology. As a performance test, the 100 MHz reference signal from a Hydrogen maser clock is disseminated and recovered at two remote sites. Phase noise characteristics of the recovered reference frequency signal coincides with that of the hydrogen-maser source and satisfies SKA requirement. △ Less

Submitted 21 April, 2015; originally announced April 2015.

Comments: arXiv admin note: substantial text overlap with arXiv:1409.3342

Dissemination stability and phase noise specification of fiber-cascaded RF frequency dissemination

Authors: C. Gao, B. Wang, Xi. Zhu, Y. B. Yuan, L. J. Wang

Abstract: Over the past decade, fiber based frequency dissemination has achieved significant progresses in following aspects. To study the dissemination stability and phase noise specifications of the fiber-cascaded RF frequency dissemination system, we perform a lab-top experiment using three sets of RF modulated frequency dissemination systems. They are linked by 50 km + 50 km +45 km fiber spools. The dis… ▽ More Over the past decade, fiber based frequency dissemination has achieved significant progresses in following aspects. To study the dissemination stability and phase noise specifications of the fiber-cascaded RF frequency dissemination system, we perform a lab-top experiment using three sets of RF modulated frequency dissemination systems. They are linked by 50 km + 50 km +45 km fiber spools. The dissemination stabilities of each segments and whole system are measured simultaneously. After that, the phase noise of each segment is also measured and the result shows that the phase noise spectrums of recovered frequency signal can be optimized via narrow band phase lock loop. △ Less

Submitted 20 April, 2015; originally announced April 2015.

Portable Microwave Frequency Dissemination in Free Space and Implications on Ground-Satellite Synchronization

Authors: **g Miao, Bo Wang, Yu Bai, Yibo Yuan, Chao Gao, Lijun Wang

Abstract: Frequency dissemination and synchronization in free space plays an important role in global navigation satellite system, radio astronomy and synthetic aperture radar. In this paper, we demonstrate a portable radio frequency dissemination scheme via free space using microwave antennas. The setup has a good environment adaptability and high dissemination stability. The frequency signal is disseminat… ▽ More Frequency dissemination and synchronization in free space plays an important role in global navigation satellite system, radio astronomy and synthetic aperture radar. In this paper, we demonstrate a portable radio frequency dissemination scheme via free space using microwave antennas. The setup has a good environment adaptability and high dissemination stability. The frequency signal is disseminated at different distances ranging from 10 to 640 m with a fixed 10 Hz locking bandwidth, and the scaling law of dissemination stability on distance and averaging time is discussed. The preliminary extrapolation shows that the dissemination stability may reach $1\times10^{-12}/s$ in ground-to-satellite synchronization, which far exceeds all present methods, and is worthy for further study. △ Less

Submitted 19 May, 2015; v1 submitted 16 March, 2015; originally announced March 2015.

Comments: 5 pages, 4figures. Updated as the Review of Scientific Instruments published version

Journal ref: Rev. Sci. Instrum. 86, 054704 (2015)